November 3 14, 2014 Tri-State Area of Kentucky, Ohio, Indiana Orientation Courses for Advanced Manufacturing. Focus Workforce Skills Development
|
|
- Dulcie Hubbard
- 8 years ago
- Views:
Transcription
1 November 3 14, 2014 Tri-State Area of Kentucky, Ohio, Indiana Orientation Courses for Advanced Manufacturing Focus Workforce Skills Development
2 Festo Advanced Manufacturing Technology Training Seminars for Workforce Development in the Tri-State Area of Greater Cincinnati Orientation Trainings designed for machine operators factory technicians engineers training managers Festo Didactic offers an advanced manufacturing training program for industry partners in the Greater Cincinnati area in the fields of Pneumatics, Sensors and PLC. The two-weeks training program will be held at Gateway Community & Technical College (KY) and Cincinnati State Technical and Community College, Workforce Development Center (OH) beginning Monday, November 3 rd, These courses are trainings for automation technology fundamentals. Our didactical approach focuses on applied learning - therefore 70% of the training is dedicated to hands-on practice using real industrial components. We ensure the transfer of knowledge from the classroom to the factory floor. The benefit of our training is the immediate improvement of productivity and product quality through a sustainable upgrade of your employee s skills and effectiveness. Course Titles: Pneumatics, Sensor Technology, PLC Target group: Machine Operators, Factory Technicians, Engineers, Training Managers Space is limited to 12 attendees per course Price 1 : Sensors, One Day Course $ Modern Industrial Pneumatics, Two Days Course $ Programmable Logic Controllers, Two Days Course $ Dates: November 3 rd November 14 th, 2014 Location: 1 st Week: Gateway Community & Technical College Center for Advanced Manufacturing, B104 2 nd Week: Cincinnati State Technical and Community College, Workforce Development Center 1 Prices indicated above include certified instructor, equipment and training materials, and catering for coffee breaks and lunch. Participants are responsible for travel, hotel and other meal costs.
3 Training Topics: Gateway Community & Technical College, Center for Advanced Manufacturing, KY Monday, November 3 rd 9:00 am - 4:00 pm Modern Industrial Pneumatics (day 1/2) Tuesday, November 4 th 9:00 am - 4:00 pm Modern Industrial Pneumatics (day 2/2) Wednesday, November 5 th 9:00 am - 4:00 pm Programmable Logic Controllers (day 1/2) Thursday, November 6 th 9:00 am - 4:00 pm Programmable Logic Controllers (day 2/2) Friday, November 7 th 9:00 am - 4:00 pm Sensors (one day) Cincinnati State Technical and Community College, Workforce Development Center (OH) Monday, November 10 th 9:00 am - 4:00 pm Modern Industrial Pneumatics (day 1/2) Tuesday, November 11 th 9:00 am - 4:00 pm Modern Industrial Pneumatics (day 2/2) Wednesday, November 12 th 9:00 am - 4:00 pm Programmable Logic Controllers (day 1/2) Thursday, November 13 th 9:00 am - 4:00 pm Programmable Logic Controllers (day 2/2) Friday, November 14 th 9:00 am - 4:00 pm Sensors (one day) Registration: Please register for our advanced manufacturing training by October 24 th, Please contact: Carolin McCaffrey, Festo Didactic Inc. Chief Liaison Officer Greater Cincinnati, USA Direct phone: (+1) cmccaffrey-festo@i-c-s-global.com Info from partners: Angie Taylor, Gateway Community & Technical College, Center for Advanced Manufacturing Phone: (+1) angie.taylor@kctcs.edu Larry Cherveny, Cincinnati State Technical and Community College, Workforce Development Center Phone: (+1) larry.cherveny@cincinnatistate.edu
4 Modern Industrial Pneumatics The resources of the training course have been designed to fulfill the expectations of people who have the need to understand and apply the requirements of modern industrial pneumatics with real shop floor applications. The training course sets a good background for further automation trainings. Contents Single and Double Acting Cylinders Directional Control Valves Air Preparation Manifolds Flow Control Valves Troubleshooting Logic Circuits Actuator Conditions Outcomes At the conclusion of the training, participants will be able to: Interpret and draw pneumatic symbols Construct and troubleshoot pneumatic circuits Determine root cause of component failure Make speed adjustments to actuators Explain the force/pressure/area relationship Describe the different states an actuator can assume and the importance of each Identify/explain function of pneumatic components Prerequisites Basic technical knowledge Duration 2 Days
5 Programmable Logic Controllers This course will cover the basic operations of programmable logic controllers. It will include the sections of a PLC in detail, numbering systems used in a PLC, basic Boolean functions, and basic troubleshooting techniques. Contents Control Relays: Basic design and operation PLC Sections: Input, Logic and Output Input Types: Discrete, Analog and Digital Memory Types: ROM and RAM Logic Processing: Addressing and Scanning Output Types: Discrete, Analog and Digital Numbering Systems: Decimal, Binary, Octal, Hex and ASCII Boolean Functions: Identity, Not, AND & OR Circuits Basic Troubleshooting: Using a PLC as a troubleshooting tool Outcomes At the conclusion of the training, participants will be able to: Explain the operation and design of various relays State/explain the three PLC sections State/explain the three types of input devices State/explain the types of memory in a PLC Explain different types of PLC addressing State/explain the three types of output devices Convert different numbering systems used in a PLC Explain various Boolean gates/truth tables Demonstrate how to use a PLC for troubleshooting Prerequisites Modern Industrial Pneumatics Electrical Engineering Duration 2 Days
6 Sensors As manufacturing becomes increasingly automated, the understanding of sensors is critical. This course will introduce the participant to various sensors common in the automation field. Contents Position sensors Limit switches Reed switches Inductive proximity sensors Capacitive proximity sensors Optical proximity sensors (photo eyes) Pressure sensors Flow sensors Outcomes At the conclusion of the training, participants will be able to: Understand and explain various sensor terms and fundamentals Select the proper sensor for an application Make electrical connections and test the sensor for proper operation Troubleshoot; repair/replace a faulty sensor. Prerequisites Basic technical knowledge Duration 1 Day
March 2 13, 2015 Advanced Manufacturing Training Courses at
March 2 13, 2015 Advanced Manufacturing Training Courses at Gateway Community & Technical College, KY and Cincinnati State Technical and Community College, Workforce Development Center, OH Workforce Skills
More information(Part 2) Lunch Block 7 1:05 PM 2:27 PM
Wednesday, December 2 (5,1,3,7) Cycle day 3 Module 1 of the Algebra I Exam 4 BLOCK DAY LUNCHES ASSIGNED BY LOCATION DURING 3 RD. 2 nd floor classes (unless assigned b lunch below): A lunch Basement, Health,
More informationF A C T. Festo Authorized and Certified Training Centre. Training Plan
F A C T Festo Authorized and Certified Training Centre Training Plan Festo - the Automation Company /Festo Industry Festo offers components, modules and solutions for all levels of Automation Technology
More informationT146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes
T146 Electro Mechanical Engineering Technician MTCU Code 51021 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes* The graduate has reliably demonstrated the ability to: 1. fabricate
More informationUniversity of St. Thomas ENGR 230 ---- Digital Design 4 Credit Course Monday, Wednesday, Friday from 1:35 p.m. to 2:40 p.m. Lecture: Room OWS LL54
Fall 2005 Instructor Texts University of St. Thomas ENGR 230 ---- Digital Design 4 Credit Course Monday, Wednesday, Friday from 1:35 p.m. to 2:40 p.m. Lecture: Room OWS LL54 Lab: Section 1: OSS LL14 Tuesday
More informationFINAL SCHEDULE YEAR 1 AUGUST 18 22 WEEK 1
YEAR 1 AUGUST 18 22 WEEK 1 TIME MONDAY (18) TUESDAY (19) WEDNESDAY (20) THURSDAY (21) FRIDAY (22) 11am 1 LUNCH LUNCH LUNCH LUNCH LUNCH 3 YEAR 1 AUGUST 25 29 WEEK 2 TIME MONDAY (25) TUESDAY (26) WEDNESDAY
More informationHIGHER EDUCATION AND TRAINING
HIGHER EDUCATION AND TRAINING FACULTY OF COMMERCE & ENTREPRENEURSHIP & FACULTY OF BUSINESS ADMINISTRATION SEMESTER 2 NATIONAL FINAL EXINATIONS TIMETABLE (13 02 DECEMBER ) NOTE This Time Table includes
More informationAcademic Calendar for Faculty
Summer 2013 Term June 3, 2013 (Monday) June 3-4, 2013 (Monday Tuesday) June 5, 2013 (Wednesday) June 5-6, 2013 (Wednesday Thursday) June 6, 2013 (Thursday) July 3, 2013 (Wednesday) July 4, 2013 (Thursday)
More informationInternational University of Monaco 12/04/2012 12:50 - Page 1. Monday 30/01 Tuesday 31/01 Wednesday 01/02 Thursday 02/02 Friday 03/02 Saturday 04/02
International University of Monaco 12/04/2012 12:50 - Page 1 Master in Finance - Private Banking and International - from 30/01/12 to 04/02/12 Monday 30/01 Tuesday 31/01 Wednesday 01/02 Thursday 02/02
More informationLearning Systems Software Simulation
Learning Systems Software Simulation EasyVeep PLC controls and technology training FluidSIM Fluid Power training aid for instructors and design tool for engineers COSIMIR PLC 3D simulation tool for practical
More informationSensors Collecting Manufacturing Process Data
Sensors & Actuators Sensors Collecting Manufacturing Process Data Data must be collected from the manufacturing process Data (commands and instructions) must be communicated to the process Data are of
More information2011, The McGraw-Hill Companies, Inc. Chapter 3
Chapter 3 3.1 Decimal System The radix or base of a number system determines the total number of different symbols or digits used by that system. The decimal system has a base of 10 with the digits 0 through
More informationNEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER
NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER Understanding what a PAC is starts from the understanding of PLC. A PLC is a Programmable Logic while
More informationFig 3. PLC Relay Output
1. Function of a PLC PLC Basics A PLC is a microprocessor-based controller with multiple inputs and outputs. It uses a programmable memory to store instructions and carry out functions to control machines
More informationProgrammable Logic Controller PLC
Programmable Logic Controller PLC UPCO ICAI Departamento de Electrónica y Automática 1 PLC Definition PLC is a user friendly, microprocessor based, specialized computer that carries out control functions
More informationPLCs and SCADA Systems
Hands-On Programmable Logic Controllers and Supervisory Control / Data Acquisition Course Description This extensive course covers the essentials of SCADA and PLC systems, which are often used in close
More informationEE360: Digital Design I Course Syllabus
: Course Syllabus Dr. Mohammad H. Awedh Fall 2008 Course Description This course introduces students to the basic concepts of digital systems, including analysis and design. Both combinational and sequential
More informationPROGRAM AGENDA JUNE 3 7, 2013. (Between Amsterdam & Broadway)
Certified Portfolio Manager (CPM ) Executive Education Program Columbia University - New York, NY 10027 212-854-2942 execeducation@ieor.columbia.edu PROGRAM AGENDA JUNE 3 7, 2013 Monday, June 3 8:00 AM
More informationHow to Register for Courses
How to Register for Courses Important Information In order for online registration to work, English ([en-us]) must be set as the only language in Internet Options. This application does not work properly
More informationSUMMER TIMETABLE CAMBRIDGE
Monday April 8 th Tuesday April 9 th Wednesday April 10th Thursday April 11 th Friday April 12 th Student Voice Information Event 10am-12noon Recovery College East Volunteer Information Event 12.30pm-2.30pm
More informationTraining Program Overview
Effective December 2006 Page 1/5 Engine Service Training Training Requirements Each Distributor and Full Service Dealer is required to staff technicians who have successfully completed authorized DEUTZ
More informationRN Refresher Course. ~A course for registered nurses who wish to update their skills and enter the acute care, med-surg setting~
RN Refresher Course ~A course for registered nurses who wish to update their skills and enter the acute care, med-surg setting~ September 1 November 22, 2011 *orientation is September 1, classes begin
More informationTest Code: 8094 / Version 1
Blueprint Electromechanical Engineering Technology PA Test Code: 8094 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Electromechanical Engineering Technology PA Blueprint
More informationLearning Systems Modular Systems for Mechatronics Training
Learning Systems Modular Systems for Mechatronics Training MPS Modular Production System Model industrial automation systems at various levels of complexity MPS Combinations Model specific combinations
More informationMichelin North America
www.centecinc.com SC Telephone: 864.527.7750 Outside SC: 800.227.0855 Michelin North America Industrial Maintenance Technical Interview Outline Industrial Maintenance Technical Interview Outline The Technical
More informationIndustrial Education
Industrial Management, Safety Industrial Education Program Description This program is designed to train men and women for management positions in government and industry. The program was developed in
More informationF A C T. Festo Authorized and Certified Training Centre
F A C T Festo Authorized and Certified Training Centre Welcome to our FACT Centre It is our vision to be a leader in technical and industrial training at international standards. Professional competence
More informationPneumatics Basic Level Set of Overhead Transparencies TP 101
Pneumatics Basic Level Set of Overhead Transparencies TP 0 Festo Didactic 0900 en Order No.: 0900 Description: PNEUM.FOLIEN. Designation: D:OT-TP0-GB Edition: 0/000 Author: Frank Ebel Graphics: Doris Schwarzenberger
More informationH.V.A.C. Design Plumbing Design
H.V.A.C. Design H.V.A.C. Design Mira Costa College Arts Complex CP Upgrade 1. PART 1 GENERAL 1.1. DESCRIPTION SECTION 23 09 00 HVAC INSTRUMENTATION AND CONTROL 2. PART 2 - PRODUCTS 2.1. Materials
More informationCIM Computer Integrated Manufacturing
INDEX CIM IN BASIC CONFIGURATION CIM IN ADVANCED CONFIGURATION CIM IN COMPLETE CONFIGURATION DL CIM A DL CIM B DL CIM C DL CIM C DL CIM B DL CIM A Computer Integrated Manufacturing (CIM) is a method of
More informationFIRE PROTECTION SYSTEMS/EQUIPMENT MAINTENANCE & INSPECTION SEMINAR
FIRE PROTECTION SYSTEMS/EQUIPMENT MAINTENANCE & INSPECTION SEMINAR August 18-21, 2015 Conducted at the FM Global Emergency Response Consultants Training Center in Rome, Georgia (Formerly known as TSB Loss
More informationInternational University of Monaco 27/04/2012 14:55 - Page 1. Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05 Friday 04/05 Saturday 05/05
International University of Monaco 27/04/12 14:55 - Page 1 Master in International Business and Global Affairs - from 30 avril to 05 mai 12 Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05 Friday
More informationInternational University of Monaco 21/05/2012 16:01 - Page 1. Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05 Friday 04/05 Saturday 05/05
International University of Monaco 21/05/12 16:01 - Page 1 Master in International Sport Business and Management - from 30 avril to 05 mai 12 Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05 Friday
More informationLEADERSHIP DEVELOPMENT PROGRAMME
LEADERSHIP DEVELOPMENT PROGRAMME ARENA - Leadership Development Programme What is ARENA? If you are looking to: develop the skills, acquire the knowledge and understand the behaviours needed to be an effective
More informationTraining Workshop on Financial Analysis of Investment Project Scenarios with Application of COMFAR software. Training for Trainers
Training Workshop on Financial Analysis of Investment Project Scenarios with Application of COMFAR software Training for Trainers UNIDO HQs, Vienna, Austria 18 to 22 May 2015 OBJECTIVES A 5-day Training
More informationInjury Reporting Packet
Injury Reporting Packet University of Cincinnati 1-888-627-7586 www.careworks.com IMPORTANT NOTICE FOR WORKPLACE INJURIES In the event of a work-related injury when University Health Services is open,
More informationC A R E E R S. Free Training H E A L T H C A R E. Class Starts Oct. 5, 2009 ORIENTATION SCHEDULE
C A R E E R S Free Training Class Starts Oct. 5, 2009 H E A L T H C A R E ORIENTATION SCHEDULE Tuesdays @ 10:00 AM September 1,8,15,22 Thursdays @ 5:00 PM September 3,10,17 Become a Personal Care Attendant/
More informationTRY OUR SOFTWARE TAKE IT FOR A TEST DRIVE PRODUCT CATALOG 2015
WHO OUR CUSTOMERS ARE PREPARING THE FUTURE WORKFORCE Educational and training facilities all over the world rely on Real Games state-of-the-art training software. Spanning many different levels of education,
More informationIndustrial Automation Training Academy. PLC, HMI & Drives Training Programs Duration: 6 Months (180 ~ 240 Hours)
nfi Industrial Automation Training Academy Presents PLC, HMI & Drives Training Programs Duration: 6 Months (180 ~ 240 Hours) For: Electronics & Communication Engineering Electrical Engineering Instrumentation
More informationAcademic Calendar 2015-2016
Academic Calendar 2015-2016 Fall 2015 - Full/TCAT Session August 24, 2015 - December 10, 2015 Fall 2015-1st Session August 24, 2015 - October 9, 2015 Fall 2015-2nd Session October 14, 2015 - December 10,
More informationSome programming experience in a high-level structured programming language is recommended.
Python Programming Course Description This course is an introduction to the Python programming language. Programming techniques covered by this course include modularity, abstraction, top-down design,
More informationAUGUST 2014 S M T W T F S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
AUGUST 2014 17 18 19 20 22 23 SEPTEMBER 2014 5 6 OCTOBER 2014 26 27 ACADEMIC CALENDAR 2014-2015 Fall Semester 2014 AUGUST 18 First Day for Faculty 22 Opening Convocation Payment Deadline, 5 pm 25 Classes
More informationMATCHDAY 1 7-9 September 2014
MATCHDAY 1 7-9 September 2014 7 September Sunday 18:00 Group D 7 September Sunday 20:45 Group D 7 September Sunday 20:45 Group D 7 September Sunday 18:00 Group F 7 September Sunday 20:45 Group F 7 September
More informationIllinois Valley Contractor Safety Program
Illinois Valley Contractor Safety Program Welcome to the Illinois Valley Contractor Safety Program. Simply stated, this program is an off-site, one-stop shop where contractors receive two components of
More informationModbus RTU Communications RX/WX and MRX/MWX
15 Modbus RTU Communications RX/WX and MRX/MWX In This Chapter.... Network Slave Operation Network Master Operation: RX / WX Network Master Operation: DL06 MRX / MWX 5 2 D0 Modbus Network Slave Operation
More information2014 BACHELOR OF ENGINEERING TECHNOLOGY (ELECTRICAL ENGINEERING) MN4331
The Metro Bachelor of Engineering Technology (BEngTech) (Electrical) is a Level 7, 360 credit programme. The Electrical Engineering Technologist graduates will be able to work from a sound theoretical
More informationARCHITECTURE OF INDUSTRIAL AUTOMATION SYSTEMS
ARCHITECTURE OF INDUSTRIAL AUTOMATION SYSTEMS Abdu Idris Omer Taleb M.M., PhD Majmaah University, Kingdom of Saudia Arabia Abstract This article is aimed to name the levels of industrial automation, describes
More informationThe Family Health Services Training Center State Approved Phlebotomy Training Program
The Family Health Services Training Center State Approved Phlebotomy Training Program TELEPHONE: 800 838-1221 619 955-1007 FAX: 619 243-5883 1 EMAIL: phlebservices@sbcglobal.net Welcome The Family Health
More informationDigital Systems. Syllabus 8/18/2010 1
Digital Systems Syllabus 1 Course Description: This course covers the design and implementation of digital systems. Topics include: combinational and sequential digital circuits, minimization methods,
More informationGIORGI-FERMI vocational school. Knowledge and skills to be acquired by the student/trainee during his training
GIORGI-FERMI vocational school Knowledge and skills to be acquired by the student/trainee during his training Electrical course Electrical circuits and networks Programmable Logic Controller PLC (Siemens)
More information(Cat. No. 1775-L3) Product Data
(Cat. No. 1775-L3) Product Data When it comes to programmable controllers, the more power you can put into a chassis slot, the more control potential you have. The PLC-3 programmable controller, already
More informationEnrolment Services Student Recruitment How to Register in Courses
Enrolment Services Student Recruitment How to Register in Courses Registration Overview Register in courses online through mytru.ca Some programs cannot register online Before you register, ensure conflict-free
More informationFacilities Maintenance Technician Certificate Program 2013-2014. Mt. San Jacinto College
Facilities Maintenance Technician Certificate Program 2013-2014 Mt. San Jacinto College 1 Start and End Dates September 21, 2013 March 8, 2014 Menifee Campus Building 500 Room 506 2 Facilities Maintenance
More informationBusiness & Industry Training
Business & Industry Training Courses in August - December 2015 (Revised 8/18/15) * Course dates and training locations for offerings are subject to change with prior notice based on the response. Industrial
More informationSponsor and Exhibitor Information Enclosed
Indiana Township Association, Inc. 2016 Educational Conference SHERATON INDIANAPOLIS HOTEL & SUITES 8787 Keystone Crossing, Indianapolis, IN 46240 September 18-21, 2016 Indiana Township Association, Inc.
More information1.00 Lecture 1. Course information Course staff (TA, instructor names on syllabus/faq): 2 instructors, 4 TAs, 2 Lab TAs, graders
1.00 Lecture 1 Course Overview Introduction to Java Reading for next time: Big Java: 1.1-1.7 Course information Course staff (TA, instructor names on syllabus/faq): 2 instructors, 4 TAs, 2 Lab TAs, graders
More informationDuke University School of Medicine - M.D. Program Academic Calendar
Duke University School of Medicine - M.D. Program Academic Calendar approved by CAG 11/5/2014 approved by Curriculum Committee 2015-2016 FIRST YEAR 3 7 Monday Friday, Orientation to First Year - MANDATORY
More informationPinning and Graduation Ceremony at St. Aloysius. Fall Semester and Term B Classes End. St Francis School of Radiography Seniors Spring Semester
2015 2016 Academic Calendar Fall Session 2015 Saturday, August 15 Monday, August 31 Monday, August 31 Friday, September 4 Monday, September 7 Friday, October 9 Tuesday, October 20 Wednesday, October 21
More informationglobal crane training
delivering success global crane training Creating The Global Standard for Crane Knowledge www.terex.com www.terex-training.com Terex USA, LLC 3147 South 17th St., Suite 100, Wilmington, NC. 28412 1/16
More information5178 EOI Direct Digital Controls Systems Strategic Plan Schedule A. Technical Submission. City of Richmond
Schedule A Technical Submission City of Richmond TABLE OF CONTENTS... 3 1 Company information... 4 1.1 Service Organization... 4 1.2 Construction Organization... 4 2 Programming Language... 5 2.1 Example
More informationNational Taiwan University s Online Course Addition/Withdrawal Q&A
National Taiwan University s Online Course Addition/Withdrawal Q&A 1. When does it start? A: The implementation of online course addition/withdrawal test phase begins in the first semester of 2007 academic
More informationCPEN 214 - Digital Logic Design Binary Systems
CPEN 4 - Digital Logic Design Binary Systems C. Gerousis Digital Design 3 rd Ed., Mano Prentice Hall Digital vs. Analog An analog system has continuous range of values A mercury thermometer Vinyl records
More informationIndustrial Training Schedule Spring 2012
Contents About Ashdale Industrial Control Training Courses 3 Mitsubishi GX Developer Software Programming Tool 4 Mitsubishi FX Series PLC Level 1 5 Mitsubishi Variable Speed Inverter Drives 6 Mitsubishi
More informationApplicants for Employed Social Work Program (1 st & 2 nd Year)
TO: FROM: RE: Applicants for Employed Social Work Program (1 st & 2 nd Year) Cheryl Jackson-Morris, Director of Field Education Marilyn Cardone, Assistant Director of Field Education John Bonelli, Field
More informationProgramming Logic controllers
Programming Logic controllers Programmable Logic Controller (PLC) is a microprocessor based system that uses programmable memory to store instructions and implement functions such as logic, sequencing,
More informationCut down your costs, increase your productions efficiently with the knowledge of PLC s Siemens technology. SITRAIN TM THAILAND Page 1 of 14
Training Center Digital Factory and Process Industries & Drives 1. Introduction 2. Course content 3. Course Schedule 4. Terms and Condition 5. Registration Channel Page 1 of 14 1. Introduction SITRAIN
More informationSiemens Mechatronic Systems Certification Program (SMSCP)
(SMSCP) Copyright Schutzvermerk AG 2012. / Copyright-Vermerk All rights reserved and Technical Education AG is the world leader in mechanics and automated systems technologies. has over 100 years of experience
More informationMachine Architecture and Number Systems. Major Computer Components. Schematic Diagram of a Computer. The CPU. The Bus. Main Memory.
1 Topics Machine Architecture and Number Systems Major Computer Components Bits, Bytes, and Words The Decimal Number System The Binary Number System Converting from Decimal to Binary Major Computer Components
More informationInternational University of Monaco 11/06/2012 09:27 - Page 1. Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05 Friday 04/05 Saturday 05/05
International University of Monaco 11/06/2012 09:27 - Page 1 Master in Finance - Hedge Funds and Private Equity - from 30 avril to 05 mai 2012 Monday 30/04 Tuesday 01/05 Wednesday 02/05 Thursday 03/05
More informationDanfoss Turbocor Learning Center
Danfoss Turbocor Learning Center TRAINING CATALOG A subsidiary of Danfoss A/S 2 Table of Contents 1. Introduction... 5 2. Danfoss Turbocor Learning Center... 5 3. Danfoss Turbocor Instructors Profile...
More informationA-1. Chapter 1. Project planning. Chapter 1. Festo Didactic Mechatronics
A-1 Project planning A-2 Mechatronics specialists are responsible for the complete service life of an industrial machine, from the initial planning phase through to its disassembly and disposal. This cycle
More informationTreasure Island Casino
May 2016 AOA Newsletter - Woodbury YMCA 2175 Radio Drive, Woodbury MN 55125 Active Older Adult Coordinator: Becky King 651-259-9604 Treasure Island Casino A coach bus will bring us to the casino. Upon
More informationCyber Incident Forensic Response (CIFR) 2015
Cyber Incident Forensic Response (CIFR) 2015 Cyber Incident Forensic Response Training Program Program Description and Syllabus Contents A. Program Overview B. Prerequisites C. Automated Forensic Tools,
More informationBosch Packaging Academy Essential Training
Essential Training Operating Fundamentals Work safely during operation Understand the basic functions of the equipment Get familiar with the operating elements Be able to operate the equipment Get familiar
More informationTraining and Consulting
Training and Consulting Range of courses www.festo-didactic.com/my-en/ Technology, Organisation, People The perfect interplay of these main factors is essential in order to successfully put knowledge into
More informationVenue@Central Library, Cambridge. R Centrally located meeting & venue facilities R Prices based on hourly rates R 0% VAT on venue bookings
Venue@Central Library, Cambridge R Centrally located meeting & venue facilities R Prices based on hourly rates R 0% VAT on venue bookings www.cambridgeshire.gov.uk/library Venue@Central Library, Cambridge
More informationDL05 Memory Cartridge / Real Time Clock. Manual Number D0 01MC M
DL05 Memory Cartridge / Real Time Clock Manual Number D0 01MC M WARNING Thank you for purchasing automation equipment from Automationdirect.com. We want your new DirectLOGIC automation equipment to operate
More information8.1 The Structure and Features of Programmable Logic Controller
Chapter 8 : Programmable Logic Controller (PLC) 8.1 The Structure and Features of Programmable Logic Controller Programmable logic controllers (PLCs) have been used in industry in one form or another for
More informationTHINK GLOBAL, LEAD DIFFERENTLY
THINK GLOBAL, LEAD DIFFERENTLY www.mbaudechile.cl www.postgradouchile.cl If passion, focus and challenge are words used to describe the ideal MBA, it s time to get to know Tulane University and Universidad
More informationEXPERIMENT 2 TRAFFIC LIGHT CONTROL SYSTEM FOR AN INTERSECTION USING S7-300 PLC
YEDITEPE UNIVERSITY ENGINEERING & ARCHITECTURE FACULTY INDUSTRIAL ELECTRONICS LABORATORY EE 432 INDUSTRIAL ELECTRONICS EXPERIMENT 2 TRAFFIC LIGHT CONTROL SYSTEM FOR AN INTERSECTION USING S7-300 PLC Introduction:
More informationEmail: 1 nrsapre@gmail.com, 2 dr.s.m.kumar@gmail.com
INDUSTRIAL AUTOMATION WITH ELECTRO PNEUMATIC SYSTEM USING PLC & WIRELESS/LAN ENVIRONMENT - A REMOTE EXPERIMENT 1 Nitin Sapre, 2 Dr. S Mohan Kumar 1 Drives & Control Academy, Bosch Rexroth India Limited,
More informationTraining Class Catalog
EDUCATION February - March - April - May 2014 Training Class Catalog www.trane.com/indianapolis www.trane.com/fortwayne www.trane.com/southbend 800-285-2487 Page 2 www.trane.com/indianapolis Education
More informationHow To Train For A Fire Alarm System
2016 Training Classes Monaco Enterprises, Inc. 45 Years of Service Contact Information Monaco Enterprises, Inc. P.O. Box 14129 Spokane Valley, WA 99214-0129 Phone: (509) 926-6277 Fax: (509) 924-4980 Corporate
More informationAdult Education Course Bulletin. Winter and Spring 2015 January - June. www.delawareareacc.org
Adult Education Course Bulletin Winter and Spring 2015 January - June www.delawareareacc.org Career Training at the Delaware Area Career Center Emergency Medical Technician Basic North Campus 162 hours
More informationOccupational Profile: Electrical & Electronics Engineering Technician
Occupational Profile: Electrical & Electronics Engineering Technician A competent Electrical & Electronics Engineering Technician should be able to demonstrate the following skills and competences: 1.
More informationSummer 2015 Course Title & credit hours: Information Security, CET2830C (hybrid); 3 credit hours
Division of Engineering, Computer Programming, and Technology Department of Network Engineering Technology West Campus Building 9, Room 140 (407) 582-1902/1903 http://valenciacollege.edu/west/engineering/
More informationMaintenance in instrumentation Maintenance with concept and technology focusing on results
Maintenance in instrumentation Maintenance with concept and technology focusing on results www.andritz.com Specific knowledge for reliable instruments. Due to its close relation with operation and process
More informationTreasurers. Illinois Municipal Treasurers Association. Institute and Advanced Seminar for. November 15-19
Illinois Municipal Treasurers Association November 15-19 Doubletree Hotel Bloomington, IL Treasurers CPA s Financial Officers Support Staff Sponsored by Illinois Municipal Treasurers Association Eastern
More informationInduction Policy Practice Guidance Note Induction Arrangements for Newly Qualified Nurses (including Bank Nurses) V06
Induction Policy Practice Guidance Note Induction Arrangements for Newly Qualified Nurses (including Bank Nurses) V06 Date Issued Issue 1 March 2014 Planned Review March 2017 I-PGN-02 Part of NTW(HR)01
More informationRecognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
Schematic symbols are used to identify and graphically depict the function of fluid power components. Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
More informationRobotics Technology COURSE OUTLINE
Robotics COURSE OUTLINE 1. Course Title: Robotics 2. CBEDS Title: Robotics 3. CBEDS Number: 5612 4. Job Titles: Instrumentation Technician Fieldbus Software Engineer Controls Engineer Controls Programmer
More informationTechnical Courses. Course Catalog
COMPUTER INSTITUTE Technical Courses Course Catalog Copyright 1983, Computer Institute Volume September 23, 2009 1335 Rockville Pike Rockville, MD 20852 WWW.TRAINUS.COM (301) 424-0044 TABLE OF CONTENTS
More informationWant to brush up on your embalming skills? Would you like to compare notes with embalmers from all over North America?
Want to brush up on your embalming skills? Need some CEUs? Would you like to compare notes with embalmers from all over North America? yes If you answered to any of these questions, then join us in Las
More informationFSI Machine Vision Training Programs
FSI Machine Vision Training Programs Table of Contents Introduction to Machine Vision (Course # MVC-101) Machine Vision and NeuroCheck overview (Seminar # MVC-102) Machine Vision, EyeVision and EyeSpector
More informationMalaysia training and consulting. Course catalogue
Malaysia training and consulting Course catalogue About Us Festo Malaysia was established in 1978 as a wholly owned subsidiary of Festo AG & Co. KG, Germany. Festo is a leading industrial automation company
More informationIndustrial Communications Training
Standards Certification Education & Training Publishing Conferences & Exhibits Industrial Communications Training Optimizing the flow and value of real-time data Expert-led training with real-world application
More informationDPS Factory Training
DPS Factory Training Factory Training Schedule What You ll Get from DPS Factory Training What to Bring to the Factory Training Event Las Vegas and Advanced Training Classes Map to DPS Telecom Headquarters
More informationTraining Courses. Paul Haring Learning Center
2006 Paul Haring Learning Center 101 Matrix Commons Drive Fenton, MO 63026 TEL (636) 305-3610 FAX (636) 349-0601 E-Mail: Stlouistraining@trane.com www.trane.com/stlouis PAUL HARING LEARNING CENTER This
More informationINNER RANGE TRAINING CENTRE
INNER RANGE TRAINING CENTRE Inner Range Training Centre is a Registered Training Organisation and is registered to deliver the following Nationally Accredited training courses: Course in Basic Concept
More informationEDUCATION IS THE KEY TO SUCCESS Aviation Maintenance Training School (AMT School) www.amtmiami.com www.amtschool.com
A&P Oral and Practical Exam Guaranteed Preparation Course 1-Week (7 Days) Oral and Practical Exam Preparation One Price with No Hidden Fees (see web site for pricing) (Includes a Set of 3 ASA Q&A Books
More information