Standardiseringsprosjekter og nye standarder

Transcription

1 Annonseringsdato: Listenummer: 15/2015 Standardiseringsprosjekter og nye standarder Listenummer: 15/2015 Side: 1 av 145

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren Ventiler - Terminologi - Del 2: Definisjon av komponenter av ventiler Valves - Terminology - Part 2: Definition of components of valves Kommentarfrist: pren rev Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 3: Repair concrete and mortars Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 3: Repair concrete and mortars Kommentarfrist: pren ISO 4885 Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Kommentarfrist: pren ISO 5458 rev Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO/DIS 5458:2015) Kommentarfrist: pren ISO 9999 Assistive products for persons with disability - Classification and terminology (ISO/DIS 9999:2015) Assistive products for persons with disability - Classification and terminology (ISO/DIS 9999:2015) Kommentarfrist: pren ISO Thermal spraying - Terminology, classification (ISO/DIS 14917:2015) Thermal spraying - Terminology, classification (ISO/DIS 14917:2015) Kommentarfrist: pren ISO Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS :2015) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS :2015) Kommentarfrist: pren ISO rev Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Kommentarfrist: Listenummer: 15/2015 Side: 2 av 145

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - internasjonale (ISO) ISO 7001:2007/DAmd 87 Symbol PI BP 009: Biometric facial recognition facility Kommentarfrist: ISO 7001:2007/DAmd 88 Symbol PI BP 010: Look to a point Kommentarfrist: ISO 7001:2007/DAmd 77 Symbol PI BP 015: No headwear Kommentarfrist: ISO 7001:2007/DAmd 79 Symbol PI BP 017: No sunglasses Kommentarfrist: ISO 7001:2007/DAmd 80 Symbol PI BP 018: Single person Kommentarfrist: ISO 7001:2007/DAmd 81 Symbol PI PF 037: Library Kommentarfrist: ISO 7001:2007/DAmd 82 Symbol PI BP 019: Proceed forward Kommentarfrist: ISO 7001:2007/DAmd 83 Symbol PI TF 036: Self-contained camper van Kommentarfrist: ISO 7001:2007/DAmd 71 Symbol PI TF 034: Quarantine, plant Kommentarfrist: ISO 7001:2007/DAmd 86 Symbol PI BP 012: Move hair Kommentarfrist: ISO 7001:2007/DAmd 78 Symbol PI BP 016: Wait Kommentarfrist: Listenummer: 15/2015 Side: 3 av 145

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 74 Symbol PI PF 072: Loop for the hearing impaired Kommentarfrist: ISO 7001:2007/DAmd 75 Symbol PI BP 014: Do not smile Kommentarfrist: ISO 7001:2007/DAmd 76 Symbol PI BP 013: Open passport and place on scanning device Kommentarfrist: ISO 7001:2007/DAmd 89 Symbol PI CF 019: Shoeshine Kommentarfrist: ISO 7001:2007/DAmd 90 Symbol PI CF 020: Snack machine Kommentarfrist: ISO 7001:2007/DAmd 91 Symbol PI PF 073: Priority facilities for obese people Kommentarfrist: ISO 7001:2007/DAmd 92 Symbol PI TF 038: Animal transportation Kommentarfrist: ISO 7001:2007/DAmd 93 Symbol PI TF 039: Bus disembarkation Kommentarfrist: ISO 7001:2007/DAmd 94 Symbol PI TF 040: Bus embarkation Kommentarfrist: ISO 7001:2007/DAmd 95 Symbol PI TF 041: Priority seats for obese people Kommentarfrist: ISO 7001:2007/DAmd 85 Symbol PI BP 011: Manual passport control Kommentarfrist: ISO 7001:2007/DAmd 61 Symbol PI TF 029: Rental bicycle Kommentarfrist: Listenummer: 15/2015 Side: 4 av 145

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 69 Symbol PI TF 032: Quarantine, animal Kommentarfrist: ISO 7001:2007/DAmd 68 Symbol PI TF 031: Quarantine Kommentarfrist: ISO 7001:2007/DAmd 70 Symbol PI TF 033: Quarantine, people Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: ISO/DIS Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out Kommentarfrist: ISO/DIS 3536 Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Kommentarfrist: ISO/DIS Cranes -- Vocabulary -- Part 3: Tower cranes Kommentarfrist: ISO/DIS 4885 Ferrous products - Vacabulary - heat treatments Kommentarfrist: ISO/DIS 4885 Ferrous products -- Heat treatments -- Vocabulary Ferrous products -- Heat treatments -- Vocabulary Kommentarfrist: ISO/DIS 5577 Non-destructive testing -- Ultrasonic testing -- Vocabulary Kommentarfrist: Listenummer: 15/2015 Side: 5 av 145

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: ISO/DIS Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: ISO/DIS Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: ISO/DIS Internasjonal museumsstatistikk International museum statistics Kommentarfrist: ISO/DIS Geographic information -- Terminology Kommentarfrist: ISO/DIS Language resource management -- Semantic annotation framework -- Part 6: Principles of semantic annotation (SemAF Principles) Language resource management -- Semantic annotation framework -- Part 6: Principles of semantic annotation (SemAF Principles) Kommentarfrist: ISO-standarder ISO 8044:2015 Corrosion of metals and alloys -- Basic terms and definitions Erstatter A00008:20: ISO 8157:2015 Fertilizers and soil conditioners -- Vocabulary Erstatter A00008:20: ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 5: Surface form tolerances Erstatter A00008:20: ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances Erstatter A00008:20:018092,A00008:20: Listenummer: 15/2015 Side: 6 av 145

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 19: General description of surfaces and components ISO :2015 Building construction machinery and equipment -- Concrete placing systems for stationary equipment -- Part 1: Terminology and commercial specifications ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 3: Release procedures for standards documents Rapporter fra CEN (CR) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS :2011) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Fastsatte norske standarder NS-EN 16687:2015 Byggevarer - Vurdering av frigjøring av farlige stoffer - Terminologi Construction products - Assessment of release of dangerous substances - Terminology NS-EN ISO 11074:2015 Jordkvalitet - Terminologi (ISO 11074:2015) Soil quality - Vocabulary (ISO 11074:2015) Listenummer: 15/2015 Side: 7 av 145

8 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN ISO 17100:2015 Oversettelsestjenester - Krav til oversettelsestjenester (ISO 17100:2015) Translation Services - Requirements for translation services (ISO 17100:2015) NS-EN ISO 17658:2015 Sveising - Uregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi (ISO 17658:2002) Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002) Tilbaketrukne norske standarder NS-EN 12832:1999 Karakterisering av slam - Disponering av slam - Terminologi Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Intelligent transport systems -- ITS central data dictionaries -- Part 3: Object identifier assignments for ITS data concepts Intelligent transport systems -- ITS central data dictionaries -- Part 3: Object identifier assignments for ITS data concepts Kommentarfrist: ISO/DIS Intelligent transport systems -- Commercial freight -- Automotive visibility in the distribution supply chain -- Part 1: Architecture and data definitions Kommentarfrist: ISO/DIS Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Kommentarfrist: ISO/DIS Project, programme and portfolio management -- Guidance on governance Project, programme and portfolio management -- Guidance on governance Kommentarfrist: Listenummer: 15/2015 Side: 8 av 145

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Project, programme and portfolio management -- Guidance on governance Project, programme and portfolio management -- Guidance on governance Kommentarfrist: ISO/DIS Societal security -- Emergency management -- Guidelines for emergency management capability assessment Societal security -- Emergency management -- Guidelines for emergency management capability assessment Kommentarfrist: ISO-standarder ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison Erstatter A00008:20: ISO/TR 16786:2015 Intelligent transport systems -- The use of simulation models for evaluation of traffic management systems -- Input parameters and reporting template for simulation of traffic signal control systems Intelligent transport systems -- The use of simulation models for evaluation of traffic management systems -- Input parameters and reporting template for simulation of traffic signal control systems ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 3: Release procedures for standards documents Rapporter fra CEN (CR) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR :2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) Listenummer: 15/2015 Side: 9 av 145

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS :2013 Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS :2013) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS ) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 10345:2013 Retningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR :2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Listenummer: 15/2015 Side: 10 av 145

11 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS :2014 Innovation management - Part 2: Strategic intelligence management CEN/TS :2014 Innovation management - Part 3: Innovation thinking CEN/TS :2014 Innovation management - Part 4: Intellectual property management CEN/TS :2014 Innovation management - Part 5: Collaboration management CEN/TS :2014 Innovation management - Part 6: Creativity management CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability CEN/TS :2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS :2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN :2015 Energirevisjoner - Del 5: Kompetanse til energirevisorer Energy audits - Part 5: Competence of energy auditors NS-EN ISO 18490:2015 Ikke-destruktiv prøving - Evaluering av synsskarphet hos NDT-personell (ISO 18490:2015) Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015) Listenummer: 15/2015 Side: 11 av 145

12 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Tilbaketrukne norske standarder NS-EN 15038:2006 Oversettelsestjenester - Krav til tjenester Translation services - Service requirements 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren Tekstiler - Tekstiler som er behandlet i vaskeri - Kontrollsystem for biologisk forurensning Textiles - Laundry processed textiles - Biocontamination control system Kommentarfrist: pren Textiles - Laundry processed textiles - Biocontamination control system Textiles - Laundry processed textiles - Biocontamination control system Kommentarfrist: pren Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: pren ISO Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO/DIS 10273:2015) Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO/DIS 10273:2015) Kommentarfrist: pren ISO Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT- PCR - Part 1: Method for quantification (ISO/DIS :2015) Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT- PCR - Part 1: Method for quantification (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Microbiology - General guidance for the detection of presumptive pathogenic Yersinia enterocolitica Kommentarfrist: ISO/DIS Microbiology of the food chain -- Horizontal method for the detection of pathogenic Yersinia enterocolitica Microbiology of the food chain -- Horizontal method for the detection of pathogenic Yersinia enterocolitica Kommentarfrist: Listenummer: 15/2015 Side: 12 av 145

13 07 Matematikk. Naturvitenskap ISO/DIS Microbiology of the food chain -- Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT- PCR -- Part 1: Method for quantification Microbiology of the food chain -- Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT- PCR -- Part 1: Method for quantification Kommentarfrist: ISO-standarder ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots Rapporter fra CEN (CR) CEN ISO/TR :2014 Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR :2014) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS :2011) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 13830:2013 Nanoteknologi - Veiledning om frivillig merking av forbrukerprodukter som inneholder produserte nanoobjekter (ISO/TS 1380:2013) Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS 17919:2013 Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013) Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013) Listenummer: 15/2015 Side: 13 av 145

14 07 Matematikk. Naturvitenskap CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TR :2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TR 16588:2014 Manual measurement of snow water equivalent Fastsatte norske standarder NS-EN ISO :2015 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for telling av beta-glukuronidase-positiv Escherichia coli - Del 3: Bestemmelse og sannsynligste antall-teknikk ved bruk av 5-brom-4-klor-3-indolyl-ß-D-glukuronid (ISO :2015) Microbiology of the food chain - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide (ISO :2015) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 5359:2014/prA1 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO 5359:2014/DAM 1:2015) Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO 5359:2014/DAM 1:2015) Kommentarfrist: EN ISO 18082:2014/prA1 Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases - Amendment 1 (ISO 18082:2014/DAM 1:2015) Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases - Amendment 1 (ISO 18082:2014/DAM 1:2015) Kommentarfrist: FprEN ISO rev Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO/DIS :2015) Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO/DIS :2015) Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods Kommentarfrist: Listenummer: 15/2015 Side: 14 av 145

15 11 Helsevesen, Teknikk pren Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods Kommentarfrist: pren Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: pren ISO 5366 Inkontinens rør - Bedøvelse og åndedrettsvern (ISO/DIS 5366:2015) Anaesthetic and respiratory equipment - Tracheostomy tubes (ISO/DIS 5366:2015) Kommentarfrist: pren ISO Kirurgiske instrumenter - Materialer - Del1: Metaller (ISO/DIS :2015) Surgical instruments - Materials - Part 1: Metals (ISO/DIS :2015) Kommentarfrist: pren ISO Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO/DIS :2015) Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 15 av 145

16 11 Helsevesen, Teknikk pren ISO Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO/DIS :2015) Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO/DIS :2015) Kommentarfrist: pren ISO Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO/DIS :2015) Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO/DIS :2015) Kommentarfrist: pren ISO 9999 Assistive products for persons with disability - Classification and terminology (ISO/DIS 9999:2015) Assistive products for persons with disability - Classification and terminology (ISO/DIS 9999:2015) Kommentarfrist: pren ISO rev Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO/DIS :2015) Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO/DIS :2015) Kommentarfrist: pren ISO Nål-baserte innsprøytningssystemer til medisinsk bruk - Krav og prøvingsmetoder - Del 7: Tilgjengelighet for personer med nedsatt syn (ISO/DIS : 2015) Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment (ISO/DIS :2015) Kommentarfrist: pren ISO Oftalmisk optikk - Brilleinnfatninger - Krav og prøvingsmetoder (ISO/DIS 12870: 2015) Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO/DIS 12870:2015) Kommentarfrist: pren ISO Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators (ISO/DIS :2015) Kommentarfrist: pren ISO Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS :2015) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 16 av 145

17 11 Helsevesen, Teknikk pren ISO rev Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Kommentarfrist: pren ISO Tannpleie - Fjærer til bruk i kjeveortopedi (ISO/DIS 17254:2015) Dentistry - Springs for use in orthodontics (ISO/DIS 17254:2015) Kommentarfrist: pren ISO Dentistry - Interoperability of CAD/CAM-systems Kommentarfrist: pren ISO Small bore connectors for liquids and gases in healthcare applications - Part 2 - Connectors for respiratory applications Small bore connectors for liquids and gases in healthcare applications - Part 2 - Connectors for respiratory applications Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 5359:2014/DAmd 1 Anestesi og respirasjonsutstyr - Lavtrykks-slangekonstruksjoner for bruk med medisinske gasser (ISO/FDIS 5359:2014) Kommentarfrist: ISO 18082:2014/DAmd 1 Anestesi og respirasjonsutstyr - Ikke-utskiftbare gjenget (NIST) lavtrykk-kontakter for medisinske gasser (ISO/FDIS 18082:2014) Kommentarfrist: ISO/DIS 1797 Dentistry -- Shanks for rotary, oscillating and reciprocating instruments Kommentarfrist: ISO/DIS Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 13: Graduated flow regulators for single use with fluid contact Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact Kommentarfrist: Listenummer: 15/2015 Side: 17 av 145

18 11 Helsevesen, Teknikk ISO/DIS Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 5: Functional requirements and testing Kommentarfrist: ISO/DIS Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 5: Functional requirements and testing Kommentarfrist: ISO/DIS 9999 Technical aids for disabled persons - Classification (Revision of first edition (ISO 9999:1992)) Kommentarfrist: ISO/DIS 9999 Assistive products for persons with disability -- Classification and terminology Kommentarfrist: ISO/DIS Prefilled syringes -- Part 8: Requirements and test methods for finished prefilled syringes Kommentarfrist: ISO/DIS Sterilization of health care products -- Radiation -- Part 3: Guidance on dosimetric aspects of development, validation and routine control Sterilization of health care products -- Radiation -- Part 3: Guidance on dosimetric aspects of development, validation and routine control Kommentarfrist: ISO/DIS Needle-based injection systems for medical use -- Requirements and test methods -- Part 7: Accessibility for persons with visual impairment Kommentarfrist: ISO/DIS Ophthalmic optics - Spectacle frames - Fundamental requirements and test methods Kommentarfrist: ISO/DIS Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: ISO/DIS Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: Listenummer: 15/2015 Side: 18 av 145

19 11 Helsevesen, Teknikk ISO/DIS Nomenclature -- Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange Kommentarfrist: ISO/DIS Medical devices -- Quality management -- Medical device nomenclature data structure Medical devices -- Quality management -- Medical device nomenclature data structure Kommentarfrist: ISO/DIS Dentistry -- Coiled springs for use in orthodontics Kommentarfrist: ISO/DIS Dentistry -- Interoperability of CAD/CAM Systems Kommentarfrist: ISO/DIS Kvinnekondomer - Krav og prøvingsmetoder Female condoms -- Requirements and test methods Kommentarfrist: ISO/DIS Female condoms -- Requirements and test methods Female condoms -- Requirements and test methods Kommentarfrist: ISO/DIS Small bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements Kommentarfrist: ISO/DIS Small-bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements Small-bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements Kommentarfrist: ISO/DIS Small bore connectors for liquids and gases in healthcare applications -- Part 2: Connectors for breathing systems and driving gases applications Small bore connectors for liquids and gases in healthcare applications -- Part 2: Connectors for breathing systems and driving gases applications Kommentarfrist: ISO/DIS Medical Electrical Equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment Kommentarfrist: Listenummer: 15/2015 Side: 19 av 145

20 11 Helsevesen, Teknikk ISO/DIS Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement Kommentarfrist: ISO-standarder ISO 8624:2011/Amd 1:2015 ISO 16671:2015 Ophthalmic implants -- Irrigating solutions for ophthalmic surgery Erstatter A00008:20: ISO 16672:2015 Ophthalmic implants -- Ocular endotamponades Erstatter A00008:20: ISO 18664:2015 Traditional Chinese Medicine -- Determination of heavy metals in herbal medicines used in Traditional Chinese Medicine ISO/TR :2015 Wheelchair seating -- Part 9: Clinical interface pressure mapping guidelines for seating Wheelchair seating -- Part 9: Clinical interface pressure mapping guidelines for seating Rapporter fra CEN (CR) CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the application of ISO and ISO (ISO/TS 16775:2014) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 16677:2014 Øyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release Listenummer: 15/2015 Side: 20 av 145

21 11 Helsevesen, Teknikk CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Fastsatte norske standarder NS-EN :2010+A1:2015 Utstyr til å bære pasienter til bruk i veiambulanser - Del 1: Generelle båresystemer og utstyr til å bære pasienter Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment NS-EN ISO 6872:2015 Tannpleie - Keramiske materialer (ISO 6872:2015) Dentistry - Ceramic materials (ISO 6872:2015) NS-EN ISO :2015 Infusjonsutstyr til medisinsk bruk - Del 8: Infusjonsutstyr til engangsbruk med trykkinfusjonsapparater (ISO :2015) Infusion equipment for medical use - Part 8: Infusion sets for single use with pressure infusion apparatus (ISO :2015) NS-EN ISO :2015 Infusjonsutstyr til medisinsk bruk - Del 9: Overføringsrør til engangsbruk med trykkinfusjonsapparater (ISO :2015) Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment (ISO :2015) NS-EN ISO :2015 Infusjonsutstyr til medisinsk bruk - Del 10: Tilbehør for overføringsrør til engangsbruk med trykkinfusjonsapparater (ISO :2015) Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO :2015) Listenummer: 15/2015 Side: 21 av 145

22 11 Helsevesen, Teknikk NS-EN ISO :2015 Infusjonsutstyr til medisinsk bruk - Del 11: Infusjonsfiltre til engangsbruk med trykkinfusjonsapparater (ISO :2015) Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment (ISO :2015) NS-EN ISO :2015 Sterilisering av helsetjenesteprodukter - Stråling - Del 1: Krav til utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO :2006, innbefattet Amd 1:2013) Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO :2006, including Amd 1:2013) NS-EN ISO :2015 Sterilisering av helsetjenesteprodukter - Stråling - Del 2: Bestemmelse av steriliseringsdose (ISO :2013) Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO :2013) NS-EN ISO :2015 Aseptisk behandling av helsepleieprodukter - Del 1: Generelle krav (ISO :2008, innbefattet Amd 1:2013) Aseptic processing of health care products - Part 1: General requirements (ISO :2008, including Amd 1:2013) NS-EN ISO 15197:2015 In vitro-diagnostiske prøvingssystemer - Krav til systemer for egenovervåking av blodsukker ved håndtering av diabetes mellitus (ISO 15197:2013) In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) NS-EN ISO 16061:2015 Instrumenter til bruk i forbindelse med ikke-aktive kirurgiske implantater - Generelle krav (ISO 16061:2015) Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) NS-EN ISO 18490:2015 Ikke-destruktiv prøving - Evaluering av synsskarphet hos NDT-personell (ISO 18490:2015) Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015) NS-EN ISO 23640:2015 In vitro-diagnostisk medisinsk utstyr - Stabilitetsprøving av in vitro-diagnostiske reagenser (ISO 23640:2011) In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) NS-EN ISO 24234:2015 Tannpleie - Dental amalgam (ISO 24234:2015) Dentistry - Dental amalgam (ISO 24234:2015) NS-EN ISO :2015 Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 20: Felles prøvingsmetoder (ISO :2015) Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO :2015) NS-EN ISO/IEC :2015 Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 20: Felles prøvingsmetoder (ISO :2015) Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO :2015) Listenummer: 15/2015 Side: 22 av 145

23 11 Helsevesen, Teknikk Tilbaketrukne norske standarder NS-EN :2010 Utstyr til å bære pasienter til bruk i veiambulanser - Del 1: Spesifikasjon for generelle båresystemer og utstyr til å bære pasienter Patient handling equipment used in road ambulances - Part 1: Specification for general stretcher systems and patient handling equipment NS-EN ISO 6872:2008 Tannpleie - keramiske materialer (ISO 6872:2008) Dentistry - Ceramic materials (ISO 6872:2008) NS-EN ISO :2004 Infusjonsutstyr til medisinsk bruk - Del 8: Infusjonsutstyr til bruk med trykkinfusjonsapparater (ISO :2004) Infusion equipment for medical use - Part 8: Infusion equipment for use with pressure infusion apparatus (ISO :2004) NS-EN ISO :2004 Infusjonsutstyr til medisinsk bruk - Del 9: Overføringsrør til bruk med trykkinfusjonsapparater (ISO :2004) Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment (ISO :2004) NS-EN ISO :2004 Infusjonsutstyr til medisinsk bruk - Del 10: Tilbehør for overføringsrør til bruk med trykkinfusjonsapparater (ISO :2004) Infusion equipment for medical use - Part 10: Accessories for fluid lines for use with pressure infusion equipment (ISO :2004) NS-EN ISO :2004 Infusjonsutstyr til medisinsk bruk - Del 11: Infusjonsfiltere til bruk med trykkinfusjonsapparater (ISO :2004) Infusion equipment for medical use - Part 11: Infusion filters for use with pressure infusion equipment (ISO :2004) NS-EN ISO :2006 Sterilisering av helsetjenesteprodukter - Stråling - Del 1: Krav til utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO :2006) Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO :2006) NS-EN ISO :2006/A1:2013 Endringsblad A1 - Sterilisering av helsetjenesteprodukter - Stråling - Del 1: Krav til utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO :2006/Amd 1:2013) Amendment A1 - Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO :2006/Amd 1:2013) Listenummer: 15/2015 Side: 23 av 145

24 11 Helsevesen, Teknikk NS-EN ISO :2013 Sterilisering av helsetjenesteprodukter - Stråling - Del 2: Bestemmelse av steriliseringsdose (ISO :2013) Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO :2013) NS-EN ISO :2011 Aseptisk behandling av helsepleieprodukter - Del 1: Generelle krav (ISO :2008) Aseptic processing of health care products - Part 1: General requirements (ISO :2008) NS-EN ISO :2011/A1:2013 Endringsblad A1 - Aseptisk behandling av helsepleieprodukter - Del 1: Generelle krav (ISO :2008/Amd 1:2013) Amendment A1 - Aseptic processing of health care products - Part 1: General requirements (ISO :2008/Amd 1:2013) NS-EN ISO 15197:2013 In vitro-diagnostiske prøvingssystemer - Krav til systemer for egenovervåking av blodsukker ved håndtering av diabetes mellitus (ISO 15197:2013) In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) NS-EN ISO 23640:2013 In vitro-diagnostisk medisinsk utstyr - Stabilitetsprøving av in vitro-diagnostiske reagenser (ISO 23640:2011) In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) NS-EN ISO 24234:2004 Tannpleie - Kvikksølv og metallpulver for dental amalgam (ISO 24234:2004) Dentistry - Mercury and alloys for dental amalgam (ISO 24234:2004) NS-EN ISO 24234:2004/A1:2011 Endringsblad A1 - Tannpleie - Kvikksølv og metallpulver for dental amalgam - Endringsblad 1: Krav til merking og produsentens instruksjoner angående kvikksølv (ISO 24234:2004/Amd 1:2011) Amendment A1 - Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/Amd 1:2011) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN :2011/prA1 Utvidet anvendelse av resultater fra prøving av brannmotstanden til tekniske installasjoner - Del 1: Kanaler Extended application of results from fire resistance tests for service installations - Part 1: Ducts Kommentarfrist: Listenummer: 15/2015 Side: 24 av 145

25 13 Miljøvern. Helsevern. Sikkerhet pren 3-8 rev Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 Kommentarfrist: pren Fire detection and fire alarm systems - Part 11: Manual call points Kommentarfrist: pren Brannalarmanlegg - Del 11: Manuelle alarmknapper Fire detection and fire alarm systems - Part 11: Manual call points Kommentarfrist: pren Brannalarmanlegg - Del 25: Komponenter med radiokommunikasjon Fire detection and fire alarm systems - Part 25: Components using radio links Kommentarfrist: pren 1496 Redningsutstyr - Heisemekanismer for redning Personal fall protection equipment - Rescue lifting devices Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 1: Beholdere med kapasitet opptil l med flatt eller buet lokk for løftetapp, dobbeltløftetapp eller pocket løfteutstyr - Mål og utforming Stationary waste containers - Part 1: Containers with a capacity up to l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 2: Ytelseskrav og prøvingsmetoder Stationary waste containers - Part 2: Performance requirements and test methods Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 3: Helse- og sikkerhetskrav Stationary waste containers - Part 3: Safety and health requirements Kommentarfrist: pren Stationary waste containers - Part 4: Waste-Mechatronics Kommentarfrist: Listenummer: 15/2015 Side: 25 av 145

26 13 Miljøvern. Helsevern. Sikkerhet pren Influence of cementitious products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials Influence of cementitious products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials Kommentarfrist: pren Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources Kommentarfrist: pren Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) Kommentarfrist: pren Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air Kommentarfrist: pren Biobaserte produkter - Biobasert karboninnhold - Bestemmelse av biobasert karboninnhold ved bruk av radiokarbon metode Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method Kommentarfrist: pren Fjellklatringsutstyr - Avalanche airbag-systemer - Sikkerhetskrav og prøvingsmetoder Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods Kommentarfrist: pren Vannundersøkelse Veiledning for overvåking av elvemusling populasjoner (Margaritifera margaritifera) og deres livsmiljø Water quality - Guidance standard on monitoring freshwater pearl mussel (margaritifera margaritifera) populations and their environment Kommentarfrist: pren Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: pren Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters Kommentarfrist: Listenummer: 15/2015 Side: 26 av 145

27 13 Miljøvern. Helsevern. Sikkerhet pren Earthworks - Part 2: Classification of materials Kommentarfrist: pren Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters Kommentarfrist: pren ISO 7243 Ergonomi for termisk miljø - Vurdering av varmespenning ved bruk av WBGT (wet bulb globe temperature)-indeks Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO/DIS 7243:2015) Kommentarfrist: pren ISO Ergonomi for samhandling mellom menneske og system Del 112: Prinsipper for presentasjon av informasjon Ergonomics of human-system interaction - Part 112: Principles for the presentation of information (ISO/DIS :2015) Kommentarfrist: pren ISO Ergonomi for samhandling mellom menneske og system Del 960: Rammeverk og veiledning for geststyring Ergonomics of human-system interaction - Part 960: Framework and guidance for gesture interactions (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 3: Face Protectors (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 3: Face Protectors (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS :2015) Kommentarfrist: pren ISO Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 27 av 145

28 13 Miljøvern. Helsevern. Sikkerhet pren ISO Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO/DIS 11504:2015) Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO/DIS 11504:2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance level Part 2: Safety (German and English version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 3: Level 150 Safety requirements (German and English Version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 4: Level 100 Safety requirements (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 5: Level 50 Safety requirements (German and English version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Accessories - Part 8: Safety requirements and test methods (German and English version pren ISO ) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Part 9: Test methods (ISO/DIS :2015) Kommentarfrist: pren ISO Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO/DIS :2015) Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 28 av 145

29 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - internasjonale (ISO) ISO :2005/DAmd 1 Mekaniske vibrasjoner og støt - Kuldeprovokasjonsprøving for vurdering av perifer vaskulær funksjon - Del 1: Måling og vurdering av temperatur på huden på fingeren - Endringsblad 1 Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: ISO/DIS Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: ISO/DIS Fire protection -- Automatic sprinkler systems -- Part 6: Requirements and test methods for check valves Kommentarfrist: ISO/DIS Fire protection - Automatic sprinkler systems - Part 7: Requirements and test methods for Early Suppression Fast Response (ESFR) sprinklers Kommentarfrist: ISO/DIS 7029 Akustikk - Statistisk fordeling av høreterskler som funksjon av alder Acoustics - Statistical distribution of hearing thresholds related to age and gender Kommentarfrist: ISO/DIS 7243 Ergonomics of the thermal environment -- Assessment of heat stress using the WBGT (wet bulb globe temperature) index Kommentarfrist: ISO/DIS Ergonomi for samhandling mellom menneske og system Del 112: Prinsipper for presentasjon av informasjon Ergonomics of human-system interaction -- Part 112: Principles for the presentation of information Kommentarfrist: Listenummer: 15/2015 Side: 29 av 145

30 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Ergonomi for samhandling mellom menneske og system Del 960: Rammeverk og veiledning for geststyring Ergonomics of human-system interaction -- Part 960: Framework and guidance for gesture interactions Kommentarfrist: ISO/DIS Mekaniske vibrasjoner - Laboratoriemetode for vurdering av setevibrasjoner i kjøretøyer - Del 1: Generelle krav Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements Kommentarfrist: ISO/DIS Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons Kommentarfrist: ISO/DIS Measurement of radioactivity in the environment -- Air: radon Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement Kommentarfrist: ISO/DIS Personal flotation devices -- Part 2: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 3: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 4: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods Kommentarfrist: Listenummer: 15/2015 Side: 30 av 145

31 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Personal flotation devices -- Part 9: Test methods Kommentarfrist: ISO/DIS Personal flotation devices - Part 2: Class B (offshore lifejackets, extreme conditions - 275N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 3: Class C (offshore lifejackets, extreme conditions - 150N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 4: Class D (inland/close to shore lifejackets N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 5: Class E, (buoyance aids - 50 N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 8: Additional items, safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices - Part 9: Test methods for classes A to F Kommentarfrist: ISO/DIS Validation methods for fire gas analyses -- Part 2: Validation of quantification method Kommentarfrist: ISO/DIS Environmental management -- Environmental technology verification (ETV) Kommentarfrist: ISO/DIS Indoor air -- Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) Indoor air -- Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) Kommentarfrist: ISO/DIS Soil quality -- Sampling -- Part 100: Umbrella Kommentarfrist: Listenummer: 15/2015 Side: 31 av 145

32 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Geotechnical investigation and testing -- Geotechnical monitoring by field instrumentation -- Part 2: Measurement of displacements along a line: Extensometers Geotechnical investigation and testing -- Geotechnical monitoring by field instrumentation -- Part 2: Measurement of displacements along a line: Extensometers Kommentarfrist: ISO/DIS Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Kommentarfrist: ISO/DIS Soil quality -- Procedure for site-specific ecological risk assessment of soil contamination (TRIAD approach) Soil quality -- Procedure for site-specific ecological risk assessment of soil contamination (TRIAD approach) Kommentarfrist: ISO/DIS Carbon dioxide capture, transportation and geological storage -- Pipeline transportation systems Carbon dioxide capture, transportation and geological storage -- Pipeline transportation systems Kommentarfrist: ISO/FDIS Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness Kommentarfrist: ISO-standarder ISO :2015 Basic human body measurements for technological design -- Part 3: Worldwide and regional design ranges for use in product standards ISO :2015 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination Erstatter A00008:20: ISO :2015 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination Erstatter A00008:20: ISO 13168:2015 Water quality -- Simultaneous determination of tritium and carbon 14 activities -- Test method using liquid scintillation counting ISO :2015 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 5: Emissionsrelated diagnostic services Erstatter A00008:20: Listenummer: 15/2015 Side: 32 av 145

33 13 Miljøvern. Helsevern. Sikkerhet ISO :2015 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 6: Diagnostic trouble code definitions Erstatter A00008:20: ISO :2015 Guidelines for treated wastewater use for irrigation projects -- Part 1: The basis of a reuse project for irrigation Erstatter A00008:20: ISO :2015 Guidelines for treated wastewater use for irrigation projects -- Part 2: Development of the project ISO :2015 Guidelines for treated wastewater use for irrigation projects -- Part 3: Components of a reuse project for irrigation ISO :2015 Ergonomics -- 3-D scanning methodologies for internationally compatible anthropometric databases -- Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions ISO :2009/Amd 1:2015 Feed force ISO/TR :2015 Fire safety engineering -- Performance of structure in fire -- Part 3: Example of an open car park Fire safety engineering -- Performance of structure in fire -- Part 3: Example of an open car park ISO/TS 16780:2015 Water quality -- Determination of polychlorinated naphthalenes (PCN) -- Method using gas chromatography (GC) and mass spectrometry (MS) Water quality -- Determination of polychlorinated naphthalenes (PCN) -- Method using gas chromatography (GC) and mass spectrometry (MS) ISO/TS :2015 Radiological protection -- Characteristics of reference pulsed radiation -- Part 1: Photon radiation Radiological protection -- Characteristics of reference pulsed radiation -- Part 1: Photon radiation Rapporter fra CEN (CR) CEN ISO/TR 12296:2013 Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) CEN ISO/TS :2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS :2010) CEN ISO/TR :2013 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR :2012) Listenummer: 15/2015 Side: 33 av 145

34 13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TS :2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS :2012) CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) CEN ISO/TS :2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS :2011, Corrected version ) CEN/TR :2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data CEN/TR 15350:2013 Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16456:2013 Karakterisering av slam Veiledning for avvanning av slam Characterization of sludges - Good practice of sludge dewatering CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TR 16705:2014 Perimeter protection - Performance classification methodology CEN/TR 16721:2014 Biobaserte produkter - Oversikt over metoder for å bestemme biobasert innhold Bio-based products - Overview of methods to determine the bio-based content CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes Listenummer: 15/2015 Side: 34 av 145

35 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) CEN/TS 54-32:2015 Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems CEN/TS :2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs CEN/TS 13649:2014 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) CEN/TS 16201:2013 Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules CEN/TS 16202:2013 Sludge, treated biowaste and soil - Determination of impurities and stones CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 CEN/TS 16516:2013 Byggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air CEN/TS 16524:2013 Mekaniske produkter - Ecodesign metodikk Mechanical products - Methodology for reduction of environmental impacts in product design and development Listenummer: 15/2015 Side: 35 av 145

36 13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16595:2013 CBRN - Vulnerability Assessment and Protection of People at Risk CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene CEN/TS 16660:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the monolithic status of waste CEN/TS 16692:2015 Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i hele vannprøver ved hjelp av fastfaseekstraksjon (SPE) og gasskromatografi med trippel kvadrupol-massespektrometri Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) Fastsatte norske standarder NS-EN 54-22:2015 Brannalarmanlegg - Del 22: Tilbakestillbare varmedetekterende kabler Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors NS-EN :2015 Prøving av brannmotstanden til tekniske installasjoner - Del 2: Brannspjeld Fire resistance tests for service installations - Part 2: Fire dampers Listenummer: 15/2015 Side: 36 av 145

37 13 Miljøvern. Helsevern. Sikkerhet NS-EN 12845:2015 Faste brannslokkesystemer - Automatiske sprinklersystemer - Dimensjonering, installering og vedlikehold Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance NS-EN 13094:2015 Tanker for transport av farlig gods - Metalliske tanker med et arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og bygging Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN :2015 Prøvingsmetoder for å bestemme bidraget til lastbærende komponenters brannmotstand - Del 9: Påførte brannbeskyttelsessystemer for stålbjelker med åpninger i steget Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings NS-EN 14757:2015 Vannundersøkelse - Prøvetaking av fisk med garn Water quality - Sampling of fish with multi-mesh gillnets NS-EN ISO 11074:2015 Jordkvalitet - Terminologi (ISO 11074:2015) Soil quality - Vocabulary (ISO 11074:2015) NS-EN ISO :2015 Øye- og ansiktsbeskyttelse - Solbriller og tilsvarende produkter - Del 2: Filtre for direkte observasjon av solen (ISO :2015) Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO :2015) NS-EN ISO :2015 Geotekniske felt- og laboratorieundersøkelser - Geoteknisk overvåking ved feltinstrumentering - Del 1: Generelle regler (ISO :2015) Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO :2015) Tilbaketrukne norske standarder NS 9452:2012 Innsamling av miljødata - Påvirkningsfaktorer på norsk naturmangfold og kulturmiljø Collection of environmental data - Influencing factors on Norwegian natural diversity and cultural environment Språk: no NS 9455:2005 Vannundersøkelse - Retningslinjer for ferskvannsbiologiske undersøkelser Water quality - Guidelines for biological assessments in freshwater environments Språk: no NS-EN :1999 Prøving av brannmotstanden til tekniske installasjoner - Del 2: Brannspjeld Fire resistance tests for service installations - Part 2: Fire dampers Listenummer: 15/2015 Side: 37 av 145

38 13 Miljøvern. Helsevern. Sikkerhet NS-EN 12832:1999 Karakterisering av slam - Disponering av slam - Terminologi Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary NS-EN 12845:2004+A2:2009 Faste brannslokkesystemer - Automatiske sprinklersystemer - Dimensjonering, installering og vedlikehold Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance Språk: no NS-EN 12845:2004+A2:2009 Faste brannslokkesystemer - Automatiske sprinklersystemer - Dimensjonering, installering og vedlikehold Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance NS-EN 13094:2008 Tanker for transport av farlig gods - Metalltanker med arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og tilvirkning Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN 13094:2008/AC:2009 Rettelsesblad AC - Tanker for transport av farlig gods - Metalltanker med arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og tilvirkning Corrigendum AC - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN 14757:2005 Vannundersøkelse - Prøvetaking av fisk med garn Water quality - Sampling of fish with multi-mesh gillnets NS-EN ISO :2005 Personlig flyteutstyr - Del 1: Redningsvester for havgående skip - Sikkerhetskrav (ISO :2005) Personal flotation devices - Part 1: Lifejackets for seagoing ships - Safety requirements (ISO :2005) 17 Metrologi og måling. Fysiske fenomener Standardforslag til høring - europeiske (CEN) pren Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions Kommentarfrist: Listenummer: 15/2015 Side: 38 av 145

39 17 Metrologi og måling. Fysiske fenomener pren ISO 5458 rev Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO/DIS 5458:2015) Kommentarfrist: pren ISO Akustikk - Måling av vegdekkers innvirkning på trafikkstøy - Del 2: Metode med måling nær kilden (CPX) Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO/DIS :2015) Kommentarfrist: pren ISO Geometrical product specification (GPS) - Basic concepts - Part 4: Geometrical characteristics (ISO/DIS :2015) Kommentarfrist: pren ISO rev Geometriske produktspesifikasjoner (GPS) - Overflatebeskaffenhet: Areal - Del 71: Programvare målestandarder (ISO/DIS : 2015) Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO/DIS :2015) Kommentarfrist: pren ISO Bygningers energiytelse Termisk, sol- og dagslysegenskaper til bygningskomponenter og -deler Del 1: Forenklet beregningsmetode av sol- og dagslysegenskaper for solskjermingsutstyr kombinert med glass Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO/DIS :2015) Kommentarfrist: pren ISO Bygningers energiytelse Termisk, sol- og dagslysegenskaper til bygningskomponenter og -deler Del 3: Detaljert beregningsmetode av sol- og dagslysegenskaper for solskjermingsutstyr kombinert med glass Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO/DIS :2015) Kommentarfrist: pren ISO Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO/DIS :2015) Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :1998/DAmd 1 Metoder for kalibrering av støt- og vibrasjonstransdusere Del 1: Grunnleggende prinsipper - Endringsblad 1 Kommentarfrist: Listenummer: 15/2015 Side: 39 av 145

40 17 Metrologi og måling. Fysiske fenomener ISO/DIS Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out Kommentarfrist: ISO/DIS Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: ISO/DIS Mekaniske vibrasjoner og støt - Elastiske monteringssystemer - Del 3: Teknisk informasjon som skal angis til bruk for vibrasjonsisolasjon i nye byggverk Mechanical vibration and shock -- Resilient mounting systems -- Part 3: Technical information to be exchanged for application of vibration isolation to new buildings Kommentarfrist: ISO/DIS 5458 Technical drawings - Geometrical tolerancing - Positional tolerancing (Revision of first edition ISO 5458:1987) Kommentarfrist: ISO/DIS 5458 Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional and pattern tolerancing Kommentarfrist: ISO/DIS Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 4: General tolerances for castings using profile tolerancing in a general datum system Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 4: General tolerances for castings using profile tolerancing in a general datum system Kommentarfrist: ISO/DIS Measurement of radioactivity in the environment -- Air: radon Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement Kommentarfrist: ISO/DIS Tilstandsovervåking og diagnostikk av maskiner Vibrasjonsovervåking Del 3: Diagnostikkteknikk for elektriske motorer Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors Kommentarfrist: ISO/DIS Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation Kommentarfrist: Listenummer: 15/2015 Side: 40 av 145

41 17 Metrologi og måling. Fysiske fenomener ISO/DIS Methods for the calibration of vibration and shock transducers -- Part 17: Primary calibration by centrifuge Kommentarfrist: ISO/DIS Geometrical product specification (GPS) -- Basic concepts -- Part 4: Geometrical characteristics for quantifying form, orientation, location and run-out deviation Kommentarfrist: ISO/DIS Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards Kommentarfrist: ISO/DIS Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p Kommentarfrist: ISO-standarder ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models Estimation of sediment deposition in reservoirs using one dimensional simulation models Rapporter fra CEN (CR) CEN ISO/TS :2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS :2013, Corrected version ) CEN ISO/TS :2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS :2013) CEN/TR 10345:2013 Retningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods Fastsatte norske standarder NS-EN :2015 Lys og belysning - Måling og presentasjon av fotometriske data for lamper og lysarmaturer - Del 4: LED-lamper, LED-moduler og LED-lysarmaturer Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires Listenummer: 15/2015 Side: 41 av 145

42 17 Metrologi og måling. Fysiske fenomener NS-EN 16661:2015 Veikjøretøyer og trykkmålere for dekk (TPG) - Samvirkingsevne mellom informasjonssystemer for dekk (TIS) og TPG - Grensesnitt og krav Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements NS-EN ISO 1683:2015 Akustikk - Foretrukne referanseverdier for lyd- og vibrasjonsnivåer (ISO 1683:2015) Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015) NS-EN ISO 9295:2015 Akustikk - Bestemmelse av høyfrekvente lydeffektnivåer fra maskiner og utstyr (ISO 9295:2014) Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015) NS-EN ISO :2015 Geometriske produktspesifikasjoner (GPS) - Filtrering - Del 29: Lineære profilfiltre: Spline wavelets (ISO :2015) Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets (ISO :2015) NS-EN ISO :2015 Geometriske produktspesifikasjoner (GPS) - Filtrering - Del 40: Morfologiske profilerte filtre: Grunnleggende begreper (ISO :2015) Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts (ISO :2015) NS-EN ISO :2015 Geometriske produktspesifikasjoner (GPS) - Filtrering - Del 41: Morfologiske profilerte filtre: Filtre med skive og horisontalt linjesegment (ISO :2015) Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO :2015) NS-EN ISO :2015 Geometriske produktspesifikasjoner (GPS) - Filtrering - Del 49: Morfologiske profilerte filtre: Skala-romteknikk (ISO :2015) Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO :2015) NS-EN ISO 20361:2015 Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2015) Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) NS-EN ISO :2015 Geometriske produktspesifikasjoner (GPS) - Overflatebeskaffenhet: Areal - Del 606: Nominelle egenskaper ved instrumenter for ikke-kontakt (fokusvariasjon) (ISO :2015) Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO :2015) Tilbaketrukne norske standarder NS-EN ISO 1683:2008 Akustikk - Foretrukne referansestørrelser for lyd- og vibrasjonsnivåer (ISO 1683:2008) Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2008) Listenummer: 15/2015 Side: 42 av 145

43 17 Metrologi og måling. Fysiske fenomener NS-EN ISO 20361:2009 Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2007) Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) NS-EN ISO 20361:2009/AC:2010 Rettelsesblad AC - Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2007) Corrigendum AC - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) NS-ISO 9295:1988 Akustikk - Måling av høyfrekvent lyd fra datamaskiner og kontorutstyr - (= EN 29295:1991) (ISO 9295:1988) Acoustics - Measurement of high-frequency noise emitted by computer and business equipment - (= EN 29295:1991) (ISO 9295:1988) 19 Prøving Standardforslag til høring - internasjonale (ISO) ISO/DIS 5577 Non-destructive testing -- Ultrasonic testing -- Vocabulary Kommentarfrist: Rapporter fra CEN (CR) CEN/TR 15589:2014 Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test Fastsatte norske standarder NS-EN ISO 18490:2015 Ikke-destruktiv prøving - Evaluering av synsskarphet hos NDT-personell (ISO 18490:2015) Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015) Listenummer: 15/2015 Side: 43 av 145

44 19 Prøving NS-EN ISO :2015 Ikke-destruktiv prøving - Egenskaper og verifisering av trinnvist ultralydgrupperingssystem - Del 1: Instrumenter (ISO Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 1: Instruments (ISO :2015) 21 Mekaniske systemer og komponenter til allmenn bruk Standardforslag til høring - europeiske (CEN) pren ISO Fasteners - Inspection documents (ISO/DIS 16228:2015) Fasteners - Inspection documents (ISO/DIS 16228:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials Kommentarfrist: ISO/DIS Bevel and hypoid Gear Geometry Kommentarfrist: ISO/DIS Bevel and hypoid gear geometry Bevel and hypoid gear geometry Kommentarfrist: ISO-standarder ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Erstatter A00008:20:038940,A00008:20: ISO 18137:2015 Leaf springs -- Technical specifications Leaf springs -- Technical specifications ISO/TR 10828:2015 Worm gears -- Worm profiles and gear mesh geometry Worm gears -- Worm profiles and gear mesh geometry Erstatter A00008:20:001889,A00008:20: Listenummer: 15/2015 Side: 44 av 145

45 23 Hydrauliske systemer og komponenter til allmenn bruk 23 Hydrauliske systemer og komponenter til allmenn bruk Standardforslag til høring - europeiske (CEN) EN :2014/prA1 Ikke-fyrte trykkbeholdere - Del 2: Materialer Unfired pressure vessels - Part 2: Materials Kommentarfrist: EN :2012/prA2 Metallic industrial piping - Part 2: Materials Metallic industrial piping - Part 2: Materials Kommentarfrist: EN :2012/prA2 Endringsblad A2 - Metalliske industrielle rørsystemer - Del 5: Inspeksjon og prøving Metallic industrial piping - Part 5: Inspection and testing Kommentarfrist: EN :2012/prA2 Metallic industrial piping - Part 5: Inspection and testing Kommentarfrist: EN ISO :2012/prA1 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO :2012/DAM 1:2015) Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO :2012/DAM 1:2015) Kommentarfrist: EN ISO 14414:2015/prA1 Pump system energy assessment (ISO 14414:2015/DAM 1:2015) Pump system energy assessment (ISO 14414:2015/DAM 1:2015) Kommentarfrist: pren 558 Industriventiler - Rørarmaturventiler - Byggelengder for metallventiler til bruk i rørsystemer med flenser - PN-betegnede og klassebetegnede ventiler Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves Kommentarfrist: pren Ventiler - Terminologi - Del 2: Definisjon av komponenter av ventiler Valves - Terminology - Part 2: Definition of components of valves Kommentarfrist: pren 1439 LPG equipment and accessories - Procedure for checking transportable refillable LPG cylinders before, during and after filling Kommentarfrist: Listenummer: 15/2015 Side: 45 av 145

46 23 Hydrauliske systemer og komponenter til allmenn bruk pren Ventiler - Materialer for hus og deksler - Del 4: Kobberlegeringer spesifisert i europeiske standarder Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards Kommentarfrist: pren LPG equipment and accessories - Filling procedures for LPG cylinders Kommentarfrist: pren Plastics piping systems - Sustainability of construction works - Product Category Rules (PCR) for buried plastics piping systems Plastics piping systems - Sustainability of construction works - Product Category Rules (PCR) for buried plastics piping systems Kommentarfrist: pren Plastics piping systems - Sustainability of construction works - Product Category Rules (PCR) for plastics piping systems inside buildings Plastics piping systems - Sustainability of construction works - Product Category Rules (PCR) for plastics piping systems inside buildings Kommentarfrist: pren ISO 1401 Gummislanger for landbrukssprøyting (ISO/DIS 1401:2015) Rubber hoses for agricultural spraying (ISO/DIS 1401:2015) Kommentarfrist: pren ISO 2398 Rubber hoses, textile-reinforced, for compressed air - Specification (ISO/DIS 2398:2015) Rubber hoses, textile-reinforced, for compressed air - Specification (ISO/DIS 2398:2015) Kommentarfrist: pren ISO 6806 rev Gummislanger og slangeforbindelser til bruk i oljebrennere - Spesifikasjon (ISO/DIS 6806:2015) Rubber hoses and hose assemblies for use in oil burners - Specification (ISO/DIS 6806:2015) Kommentarfrist: pren ISO 7751 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO/DIS 7751:2015) Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO/DIS 7751:2015) Kommentarfrist: pren ISO 8033 Rubber and plastics hoses - Determination of adhesion between components (ISO/DIS 8033:2015) Rubber and plastics hoses - Determination of adhesion between components (ISO/DIS 8033:2015) Kommentarfrist: Listenummer: 15/2015 Side: 46 av 145

47 23 Hydrauliske systemer og komponenter til allmenn bruk pren ISO Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO/DIS :2015) Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics pipings systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO/DIS :2015) Plastics pipings systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO/DIS :2015) Kommentarfrist: pren ISO Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO/DIS 18119:2015) Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO/DIS 18119:2015) Kommentarfrist: pren ISO Gas cylinders - Cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO/DIS 24431:2015) Gas cylinders - Cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO/DIS 24431:2015) Kommentarfrist: Listenummer: 15/2015 Side: 47 av 145

48 23 Hydrauliske systemer og komponenter til allmenn bruk Standardforslag til høring - internasjonale (ISO) ISO :2012/DAmd 1 Kommentarfrist: ISO/DIS 7121 Metal ball valves for general-purpose industrial applications Kommentarfrist: ISO/DIS 8513 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the initial longitudinal tensile strength Kommentarfrist: ISO/DIS Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 4: Test methods for selecting steels resistant to hydrogen embrittlement Transportable gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 4: Test methods for selecting steels resistant to hydrogen embrittlement Kommentarfrist: ISO/DIS Hydraulic fluid power - On-line liquid automatic particle-counting systems - Methods of calibration and validation Kommentarfrist: ISO/DIS Gas cylinders -- Seamless steel and seamless aluminium-alloy gas cylinders and tubes --- Periodic inspection and testing Gas cylinders -- Seamless steel and seamless aluminium-alloy gas cylinders and tubes --- Periodic inspection and testing Kommentarfrist: ISO/DIS Gas cylinders -- Cylinders for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling Gas cylinders -- Cylinders for compressed and liquefied gases (excluding acetylene) -- Inspection at time of filling Kommentarfrist: ISO-standarder ISO :2015 Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series Erstatter A00008:20:037355,A00008:20: ISO :2015 Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm Erstatter A00008:20: Listenummer: 15/2015 Side: 48 av 145

49 23 Hydrauliske systemer og komponenter til allmenn bruk ISO 6432:2015 Pneumatic fluid power -- Single rod cylinders, kpa (10 bar) series, bores from 8 mm to 25 mm -- Basic and mounting dimensions Erstatter A00008:20: ISO :2015 Hydraulic fluid power -- Fatigue pressure testing of metal pressure-containing envelopes -- Part 1: Test method Erstatter A00008:20: ISO :2015 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 1: General procedures Erstatter A00008:20: Rapporter fra CEN (CR) CEN/TR 1046:2013 Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installation CEN/TR :2015 Unfired pressure vessels - Example of application CEN/TR :2015 Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket supports CEN/TR 14473:2014 Transportable gas cylinders - Porous materials for acetylene cylinders CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures CEN/TR 16787:2014 Industrial Gas Installation - Guideline CEN/TS :2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity CEN/TS 14578:2013 Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation Listenummer: 15/2015 Side: 49 av 145

50 23 Hydrauliske systemer og komponenter til allmenn bruk CEN/TS 14807:2013 Rørledningssystemer Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines CEN/TS 16650:2014 Specification for hose couplings for petrol, oil and lubricants - High pressure couplings CEN/TS 16765:2015 LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards CEN/TS 16769:2015 LPG equipment and accessories - Terminology Fastsatte norske standarder NS-EN :2015 Gassinfrastruktur - Rørledninger med maksimalt operasjonstrykk til og med 16 bar - Del 3: Spesielle funksjonskrav til stål Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel NS-EN :2015 Gassfyrte absorpsjons- og adsorpsjonsapparater og/eller varmepumper med en netto varmetilførsel som ikke overstiger 70 kw - Del 2: Sikkerhet Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw - Part 2: Safety NS-EN 13094:2015 Tanker for transport av farlig gods - Metalliske tanker med et arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og bygging Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN 13611:2015 Sikkerhets- og kontrollinnretninger for brennere og apparater for gassforming og/eller flytende brensel - Generelle krav Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements NS-EN 14071:2015 LPG-utstyr og tilbehør - Sikkerhetsventiler for LPG-trykkbeholdere - Tilbehør LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment NS-EN 14140:2014/AC:2015 Rettelsesblad AC - LPG-utstyr og tilbehør - Transportable påfyllbare sveiste stålflasker for flytende petroleumsgass (LPG) - Alternativ konstruksjon og utførelse Corrigendum AC - LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction Listenummer: 15/2015 Side: 50 av 145

51 23 Hydrauliske systemer og komponenter til allmenn bruk NS-EN 16631:2015 LPG-utstyr og tilbehør - Sikkerhetsventiler for LPG-trykkbeholdere - Krav til overhaling LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Reconditioning requirements NS-EN ISO 5802:2008/A1:2015 Endringsblad A1 - Industrivifter - Ytelsesprøving på stedet (ISO 5802:2001/Amd 1:2015) Amendment A1 - Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015) NS-EN ISO :2015 Rør av termoplast - Bestemmelse av strekkegenskaper - Del 3: Polyolefinrør (ISO :2015) Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO :2015) NS-EN ISO 13341:2010/A1:2015 Endringsblad A1 - Gassflasker - Tilkobling av ventiler på gassflasker (ISO 13341:2010/Amd 1:2015) Amendment A1 - Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015) NS-EN ISO :2015 Industriventiler - Måling, prøving og kvalifikasjonsprosedyrer for flyktige utslipp - Del 1: Klassifiseringssystem og kvalifikasjonsprosedyrer for typeprøving av ventiler (ISO :2015) Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO :2015) NS-EN ISO :2015 Industriventiler - Måle-, prøvings- og kvalifiseringsprosedyrer for flyktige utslipp - Del 2: Godkjenningsprøving for produksjon (ISO :2015) Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO :2015) NS-EN ISO 20361:2015 Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2015) Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) Tilbaketrukne norske standarder NS 153:1973 Flenser - Tilknytningsmål Flanges, mating dimensions Språk: no NS-EN :2000 Gassforsyningssystemer - Rørledninger for driftstrykk til og med 16 bar - Del 3: Spesifikke funksjonelle anbefalinger for stål Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel Listenummer: 15/2015 Side: 51 av 145

52 23 Hydrauliske systemer og komponenter til allmenn bruk NS-EN 13094:2008 Tanker for transport av farlig gods - Metalltanker med arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og tilvirkning Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN 13094:2008/AC:2009 Rettelsesblad AC - Tanker for transport av farlig gods - Metalltanker med arbeidstrykk som ikke overstiger 0,5 bar - Konstruksjon og tilvirkning Corrigendum AC - Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction NS-EN 13611:2007+A2:2011 Sikkerhets- og kontrollanordninger for gassbrennere og apparater for gassformig brensel - Generelle krav Safety and control devices for gas burners and gas burning appliances - General requirements NS-EN 14071:2004 Sikkerhetsventiler for LPG-beholdere - Tilbehør Pressure relief valves for LPG tanks - Ancillary equipment NS-EN ISO :2006 Industriventiler - Måling, prøving og kvalifikasjonsprosedyrer for flyktige utslipp - Del 1: Klassifiseringssystem og kvalifikasjonsprosedyrer for typeprøving av ventiler (ISO :2006) Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO :2006) NS-EN ISO :2006 Industriventiler - Måle-, prøvings- og kvalifiseringsprosedyrer for flyktige utslipp - Del 2: Godkjenningsprøving for produksjon (ISO :2006) Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 2: Production acceptance test of valves (ISO :2006) NS-EN ISO 20361:2009 Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2007) Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) NS-EN ISO 20361:2009/AC:2010 Rettelsesblad AC - Væskepumper og pumpeenheter - Regler for støyprøving - Nøyaktighetsgrad 2 og 3 (ISO 20361:2007) Corrigendum AC - Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) Listenummer: 15/2015 Side: 52 av 145

53 25 Produksjonsteknikk 25 Produksjonsteknikk Standardforslag til høring - europeiske (CEN) pren Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) Kommentarfrist: pren ISO 4885 Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Kommentarfrist: pren ISO rev Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO/DIS :2015) Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO/DIS :2015) Kommentarfrist: pren ISO Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO/DIS :2015) Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO/DIS :2015) Kommentarfrist: pren ISO Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO/DIS 14171:2015) Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO/DIS 14171:2015) Kommentarfrist: pren ISO Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO/DIS 14343:2015) Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO/DIS 14343:2015) Kommentarfrist: pren ISO Thermal spraying - Determination of tensile adhesive strength (ISO/DIS 14916:2015) Thermal spraying - Determination of tensile adhesive strength (ISO/DIS 14916:2015) Kommentarfrist: pren ISO Thermal spraying - Terminology, classification (ISO/DIS 14917:2015) Thermal spraying - Terminology, classification (ISO/DIS 14917:2015) Kommentarfrist: Listenummer: 15/2015 Side: 53 av 145

54 25 Produksjonsteknikk pren ISO Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding (ISO/DIS :2015) Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding (ISO/DIS :2015) Kommentarfrist: pren ISO Machine tools safety - Presses - Part 3: Sarety requirements for hydraulic presses (ISO/DIS :2015) Machine tools safety - Presses - Part 3: Sarety requirements for hydraulic presses (ISO/DIS :2015) Kommentarfrist: pren ISO Non-destructive testing of welds - General rules for metallic materials - Complementary element (ISO/DIS 17635:215) Kommentarfrist: pren ISO Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO/DIS 19598:2015) Kommentarfrist: pren ISO Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency (ISO/DIS 22829:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 3210 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) Kommentarfrist: ISO/DIS 4885 Ferrous products - Vacabulary - heat treatments Kommentarfrist: ISO/DIS 4885 Ferrous products -- Heat treatments -- Vocabulary Ferrous products -- Heat treatments -- Vocabulary Kommentarfrist: ISO/DIS Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys Kommentarfrist: Listenummer: 15/2015 Side: 54 av 145

55 25 Produksjonsteknikk ISO/DIS Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet Kommentarfrist: ISO/DIS Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fire grain steels - Classification Kommentarfrist: ISO/DIS Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels -- Classification Kommentarfrist: ISO/DIS Welding and allied processes - Flux and gas shielded electrical welding processes - Classification of solid wire electrodes for the welding of stainless steel and high alloy steels (OOW-II-2-D-1992) Kommentarfrist: ISO/DIS Welding consumables -- Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels -- Classification Kommentarfrist: ISO/DIS Thermal spraying - Determination of tensile adhesive strength Kommentarfrist: ISO/DIS Thermal spraying - Terminology, classification Kommentarfrist: ISO/DIS Qualification testing of welders for underwater welding -- Part 1: Diver-welders for hyperbaric wet welding Qualification testing of welders for underwater welding -- Part 1: Diver-welders for hyperbaric wet welding Kommentarfrist: ISO/DIS Non-destructive examination of welds - General rules for metallic materials Kommentarfrist: ISO/DIS Non-destructive testing of welds -- General rules for metallic materials -- Complementary element Kommentarfrist: Listenummer: 15/2015 Side: 55 av 145

56 25 Produksjonsteknikk ISO/DIS Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Kommentarfrist: ISO/DIS Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Kommentarfrist: ISO/DIS Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride Kommentarfrist: ISO-standarder ISO :2009/Amd 1:2015 Feed force ISO/TS :2015 Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts Rapporter fra CEN (CR) CEN ISO/TR 14745:2015 Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015) CEN/TR 13259:2013 Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes CEN/TR :2014 Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 1: Generelle krav Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirements CEN/TR :2014 Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 3: Fakler for termisk sprøyting og deres tilknytning og strømforsyninger Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units CEN/TR :2014 Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 4: Gass og flytende brenselforsyning Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supply Listenummer: 15/2015 Side: 56 av 145

57 25 Produksjonsteknikk CEN/TR :2014 Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 5: Pulver og trådmating enheter Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed units CEN/TR :2014 Termisk sprøyting - Sikkerhetkrav for termisk sprøyteutstyr - Del 6: Spraykabinett, Håndteringssystem, Støvinnsamling, Utmattende system, Filter Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TS 16599:2014 Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions Fastsatte norske standarder NS-EN ISO :2015 Kvalitetskrav for smeltesveising av metalliske materialer - Del 5: Normative referanser for kravene i ISO , ISO og ISO (ISO :2015) Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO , ISO or ISO (ISO :2015) NS-EN ISO 17658:2015 Sveising - Uregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi (ISO 17658:2002) Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002) Tilbaketrukne norske standarder NS-EN ISO :2005 Kvalitetskrav for smeltesveising av metalliske materialer - Del 5: Normative referanser for kravene i ISO , ISO og ISO (ISO :2005) Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO , ISO or ISO (ISO :2005) NS-EN ISO :2005 Kvalitetskrav for smeltesveising av metalliske materialer - Del 5: Normative referanser for kravene i ISO , ISO og ISO (ISO :2005) Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO , ISO or ISO (ISO :2005) Språk: no/en Listenummer: 15/2015 Side: 57 av 145

58 27 Energi- og varmeoverføringsteknikk 27 Energi- og varmeoverføringsteknikk Standardforslag til høring - europeiske (CEN) pren Kondenseringsenheter for kjøling - Graderingsbetingelser, toleranser og presentasjon av tilvirkers ytelsesdata Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data Kommentarfrist: pren Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units Heat pumps with electrically driven compressors - Testing and requirements for marking of domestic hot water units Kommentarfrist: pren Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kpa Safety and control devices for gas burners and gas burning appliances - Gas filters having a maximum working pressure up to and including 600 kpa Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Nuclear fuel technology -- Controlled-potential coulometric assay of plutonium Kommentarfrist: ISO/DIS Measurement of apparent thermal conductivity of wet porous building materials by a periodic method Kommentarfrist: ISO/DIS Determination of energy savings in organizations Kommentarfrist: ISO/DIS Solid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets Solid biofuels -- Determination of fines content in quantities of pellets Kommentarfrist: ISO-standarder ISO :2015 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination Erstatter A00008:20: ISO :2015 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination Erstatter A00008:20: Listenummer: 15/2015 Side: 58 av 145

59 27 Energi- og varmeoverføringsteknikk ISO 21613:2015 (U, Pu)O2 Powders and sintered pellets -- Determination of chlorine and fluorine ISO :2015 Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 9: Mechanical gas thermostats Rapporter fra CEN (CR) CEN/TS :2014 Bærekraftig fremstilt biomasse til energianvendelser Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance Fastsatte norske standarder NS-EN :2015 Gassfyrte absorpsjons- og adsorpsjonsapparater og/eller varmepumper med en netto varmetilførsel som ikke overstiger 70 kw - Del 2: Sikkerhet Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw - Part 2: Safety NS-EN :2015 Energirevisjoner - Del 5: Kompetanse til energirevisorer Energy audits - Part 5: Competence of energy auditors 29 Elektroteknikk Standardforslag til høring - europeiske (CEN) pren ISO Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency (ISO/DIS 22829:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Kommentarfrist: ISO/DIS Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Resistance welding -- Transformer-rectifier for welding guns with integrated transformers -- Transformer-rectifier units operating at 1000 Hz frequency Kommentarfrist: Listenummer: 15/2015 Side: 59 av 145

60 29 Elektroteknikk Fastsatte norske standarder NS-EN :2015 Lys og belysning - Måling og presentasjon av fotometriske data for lamper og lysarmaturer - Del 4: LED-lamper, LED-moduler og LED-lysarmaturer Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires 31 Elektronikk ISO-standarder ISO 13142:2015 Electro-optical systems -- Cavity ring-down technique for high-reflectance measurement ISO :2015 Optics and photonics -- Holography -- Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms ISO :2015 Optics and photonics -- Holography -- Part 2: Methods for measurement of hologram recording characteristics 33 Telekommunikasjon. Lyd- og videoteknikk Rapporter fra CEN (CR) CEN/TR 16671:2014 Informasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere Information technology - Authorization of mobile phones when used as RFID interrogators 35 Informasjonsteknologi. Kontormaskiner Standardforslag til høring - europeiske (CEN) pren E-Competence Framework (e-cf) - Part 1: Framework Kommentarfrist: pren ISO Ergonomi for samhandling mellom menneske og system Del 112: Prinsipper for presentasjon av informasjon Ergonomics of human-system interaction - Part 112: Principles for the presentation of information (ISO/DIS :2015) Kommentarfrist: pren ISO Ergonomi for samhandling mellom menneske og system Del 960: Rammeverk og veiledning for geststyring Ergonomics of human-system interaction - Part 960: Framework and guidance for gesture interactions (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 60 av 145

61 35 Informasjonsteknologi. Kontormaskiner pren ISO rev Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Medical devices - Quality management - Medical device nomenclature data structure (ISO/DIS 15225:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Ergonomi for samhandling mellom menneske og system Del 112: Prinsipper for presentasjon av informasjon Ergonomics of human-system interaction -- Part 112: Principles for the presentation of information Kommentarfrist: ISO/DIS Ergonomi for samhandling mellom menneske og system Del 960: Rammeverk og veiledning for geststyring Ergonomics of human-system interaction -- Part 960: Framework and guidance for gesture interactions Kommentarfrist: ISO/DIS Financial services -- Personal Identification Number (PIN) management and security -- Part 1: Basic principles and requirements for PINs in card-based systems Kommentarfrist: ISO/DIS Banking - Personal Identification Number mangement and security - Part 1: PIN protection principles and techniques [Revision of first edition (ISO :1991)] Banking - Personal Identification Number mangement and security - Part 1: PIN protection principles and techniques [Revision of first edition (ISO :1991)] Kommentarfrist: ISO/DIS Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation Kommentarfrist: ISO/DIS Intelligent transport systems -- ITS central data dictionaries -- Part 3: Object identifier assignments for ITS data concepts Intelligent transport systems -- ITS central data dictionaries -- Part 3: Object identifier assignments for ITS data concepts Kommentarfrist: ISO/DIS Nomenclature -- Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange Kommentarfrist: ISO/DIS Medical devices -- Quality management -- Medical device nomenclature data structure Medical devices -- Quality management -- Medical device nomenclature data structure Kommentarfrist: Listenummer: 15/2015 Side: 61 av 145

62 35 Informasjonsteknologi. Kontormaskiner ISO/DIS Intelligent transport systems -- Commercial freight -- Automotive visibility in the distribution supply chain -- Part 1: Architecture and data definitions Kommentarfrist: ISO/DIS Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Intelligent transport systems -- Public transport -- Emergency evacuation and disaster response and recovery -- Part 1: Framework Kommentarfrist: ISO/DIS Geographic information -- Terminology Kommentarfrist: ISO/IEC DIS Information technology - Security techniques - Modes of operation for an n-bit block cipher algorithm Kommentarfrist: ISO-standarder ISO/PAS :2015 Graphic technology -- Printing from digital data across multiple technologies -- Part 1: Principles ISO/PAS :2015 Graphic technology -- Printing from digital data across multiple technologies -- Part 2: Characterized reference printing conditions, CRPC1-CRPC7 ISO/TR 16786:2015 Intelligent transport systems -- The use of simulation models for evaluation of traffic management systems -- Input parameters and reporting template for simulation of traffic signal control systems Intelligent transport systems -- The use of simulation models for evaluation of traffic management systems -- Input parameters and reporting template for simulation of traffic signal control systems ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents Intelligent transport systems -- Cooperative ITS -- Part 2: Guidelines for standards documents ISO/TR :2015 Intelligent transport systems -- Cooperative ITS -- Part 3: Release procedures for standards documents ISO/TR 17522:2015 Health informatics -- Provisions for health applications on mobile/smart devices Health informatics -- Provisions for health applications on mobile/smart devices ISO/TS :2015 Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts Listenummer: 15/2015 Side: 62 av 145

63 35 Informasjonsteknologi. Kontormaskiner ISO/TS :2015 Health informatics -- Medical waveform format -- Part 2: Electrocardiography Health informatics -- Medical waveform format -- Part 2: Electrocardiography ISO/TS :2015 Health informatics -- Medical waveform format -- Part 3: Long term electrocardiography Health informatics -- Medical waveform format -- Part 3: Long term electrocardiography CEN Workshop Agreements CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 1: Application Programming Interface (API) - Service Provider Interface (SPI) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 2: Service Class Definition - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 3: Printer and Scanning Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 4: Identification Card Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 5: Cash Dispenser Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 6: PIN Keypad Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 7: Check Reader/Scanner Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 8: Depository Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 9: Text Terminal Unit Device Class Interface - Programmer's Reference Listenummer: 15/2015 Side: 63 av 145

64 35 Informasjonsteknologi. Kontormaskiner CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 10: Sensors and Indicators Unit Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 11: Vendor Dependent Mode Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 12: Camera Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 13: Alarm Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 14: Card Embossing Unit Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 15: Cash-In Module Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 16: Card Dispenser Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 17: Barcode Reader Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 18: Item Processing Module Device Class Interface - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 61: Application Programming Interface (API) - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Service Provider Interface (SPI) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 62: Printer and Scanning Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 63: Identification Card Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference Listenummer: 15/2015 Side: 64 av 145

65 35 Informasjonsteknologi. Kontormaskiner CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 64: Cash Dispenser Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 65: PIN Keypad Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 66: Check Reader/Scanner Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 67: Depository Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 68: Text Terminal Unit Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 69: Sensors and Indicators Unit Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 70: Vendor Dependent Mode Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 71: Camera Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 72: Alarm Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 73: Card Embossing Unit Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 74: Cash-In Module Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 75: Card Dispenser Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference Listenummer: 15/2015 Side: 65 av 145

66 35 Informasjonsteknologi. Kontormaskiner CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 76: Barcode Reader Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference CWA :2015 Extensions for Financial Services (XFS) interface specification Release Part 77: Item Processing Module Device Class Interface - Migration from Version 3.20 (CWA 16374) to Version 3.30 (this CWA) - Programmer's Reference Rapporter fra CEN (CR) CEN ISO/TR :2013 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR :2012) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR :2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS :2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS :2012) CEN ISO/TS 14265:2013 Health Informatics - Classification of purposes for processing personal health information (ISO/TS 14265:2011) CEN ISO/TS 14441:2013 Health informatics - Security and privacy requirements of EHR systems for use in conformity assessment (ISO/TS 14441:2013) CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) Listenummer: 15/2015 Side: 66 av 145

67 35 Informasjonsteknologi. Kontormaskiner CEN ISO/TS :2013 Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS ) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 9: Traffic event compact (TPEG1-TEC) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 10: Conditional access information (TPEG1-CAI) (ISO/TS :2013) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN ISO/TS 19321:2015 Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015) CEN/TR :2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TR 15872:2014 Health informatics - Guidance on patient identification and cross-referencing of identities CEN/TR 16669:2014 Informasjonsteknologi - Enhetsgrensesnitt som støtter ISO/IEC Information technology - Device interface to support ISO/IEC CEN/TR 16670:2014 Informasjonsteknologi - Analyse av trussel og sårbarhet for RFID Information technology - RFID threat and vulnerability analysis CEN/TR 16671:2014 Informasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere Information technology - Authorization of mobile phones when used as RFID interrogators Listenummer: 15/2015 Side: 67 av 145

68 35 Informasjonsteknologi. Kontormaskiner CEN/TR 16672:2014 Informasjonsteknologi - Ytelsesegenskaper for personvern for gjeldende RFID-teknologier Information technology - Privacy capability features of current RFID technologies CEN/TR 16673:2014 Informasjonsteknologi - Analyse av vurdering av personvernkonsekvenser ved RFID for spesifikke sektorer Information technology - RFID privacy impact assessment analysis for specific sectors CEN/TR 16674:2014 Informasjonsteknologi - Analyse av metoder for vurdering av personvernkonsekvenser som er relevante for RFID Information technology - Analysis of privacy impact assessment methodologies relevant to RFID CEN/TR 16684:2014 Informasjonsteknologi - Varsling av RFID - Tilleggsinformasjon som skal gis av operatører Information technology - Notification of RFID - Additional information to be provided by operators CEN/TR 16690:2014 Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITS stations CEN/TR 16742:2014 Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe CEN/TS :2013 Kollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS :2014 Identitetskortsystem - Europeisk borgerkort - Del 3: Europeisk borgerkort interoperabilitet vedhjelp av applikasjonsgrensesnitt Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface CEN/TS 16080:2013 Internet Content and communications filtering software and services CEN/TS :2014 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: Variable Message Sign (VMS) Publications Listenummer: 15/2015 Side: 68 av 145

69 35 Informasjonsteknologi. Kontormaskiner CEN/TS :2014 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications CEN/TS :2014 Kollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 1: Utveksling av data for nettverks- og rutestruktur Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format CEN/TS :2014 Kollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 2: Utveksling av tidtabell- og vognløpsdata Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange format CEN/TS 16634:2014 Personlig identifikasjon - Anbefalinger for bruk av biometri i europeisk automatisert grensekontrollsystem Personal identification - Recommendations for using biometrics in European Automated Border Control CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability CEN/TS 16685:2014 Informasjonsteknologi - Varsling av RFID - Informasjonssignalet som skal vises i områder der det brukes RFID-sendere-mottakere Information technology - Notification of RFID - The information sign to be displayed in areas where RFID interrogators are deployed CEN/TS :2014 Elektronisk avgiftsinnkreving - Sikker overvåking av autonome bomsystemer - Del 1: Samsvarskontroll Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checking CEN/TS :2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS :2015 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC CEN/TS :2015 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC CEN/TS :2014 Sikkerhetskrav - Tillitssystemer som støtter serversignering Security Requirements for Trustworthy Systems Supporting Server Signing CEN/TS :2015 Security requirements for trustworthy systems managing certificates and time-stamps Listenummer: 15/2015 Side: 69 av 145

70 35 Informasjonsteknologi. Kontormaskiner Fastsatte norske standarder NS-EN 16661:2015 Veikjøretøyer og trykkmålere for dekk (TPG) - Samvirkingsevne mellom informasjonssystemer for dekk (TIS) og TPG - Grensesnitt og krav Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements NS-EN ISO 9295:2015 Akustikk - Bestemmelse av høyfrekvente lydeffektnivåer fra maskiner og utstyr (ISO 9295:2014) Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015) Tilbaketrukne norske standarder NS-ISO 9295:1988 Akustikk - Måling av høyfrekvent lyd fra datamaskiner og kontorutstyr - (= EN 29295:1991) (ISO 9295:1988) Acoustics - Measurement of high-frequency noise emitted by computer and business equipment - (= EN 29295:1991) (ISO 9295:1988) 37 Bildeteknikk ISO-standarder ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 5: Surface form tolerances Erstatter A00008:20: ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 6: Centring tolerances Erstatter A00008:20:018092,A00008:20: ISO :2015 Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 19: General description of surfaces and components ISO :2015 Optics and photonics -- Interferometric measurement of optical elements and optical systems -- Part 4: Interpretation and evaluation of tolerances specified in ISO Erstatter A00008:20: ISO 18383:2015 Photography -- Digital cameras -- Specification guideline ISO/PAS :2015 Graphic technology -- Printing from digital data across multiple technologies -- Part 1: Principles Listenummer: 15/2015 Side: 70 av 145

71 37 Bildeteknikk ISO/PAS :2015 Graphic technology -- Printing from digital data across multiple technologies -- Part 2: Characterized reference printing conditions, CRPC1-CRPC7 ISO/TR 18159:2015 Document management -- Environmental and work place safety regulations affecting microfilm processors Document management -- Environmental and work place safety regulations affecting microfilm processors 43 Kkjøretøyteknikk Standardforslag til høring - europeiske (CEN) pren Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Kommentarfrist: pren Sykler - Elektrisk drevne sykler - EPAC-sykler Cycles - Electrically power assisted cycles - EPAC Bicycles Kommentarfrist: pren Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures Road vehicles - Security of the mechanical seals used on tachographs - Requirements and test procedures Kommentarfrist: pren ISO 8936 Fortelt til campingvogner - Krav og prøvingsmetoder (ISO/DIS 8936:2015) Awnings for leisure accommodation vehicles - Requirements and test methods (ISO/DIS 8936:2015) Kommentarfrist: pren ISO Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO/DIS :2015) Kommentarfrist: pren ISO Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO/DIS :2015) Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2012/DAmd 1 Kommentarfrist: Listenummer: 15/2015 Side: 71 av 145

72 43 Kkjøretøyteknikk ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO :2012/DAmd 1 Kommentarfrist: ISO/DIS 3536 Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Kommentarfrist: ISO/DIS Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: ISO/DIS Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron Kommentarfrist: Listenummer: 15/2015 Side: 72 av 145

73 43 Kkjøretøyteknikk ISO/DIS Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel Kommentarfrist: ISO/DIS Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded oil control rings made of steel Kommentarfrist: ISO/DIS 8936 Caravan awnings - Safety requirements [Revision of first edition (ISO 8936:1988)] Caravan awnings - Safety requirements [Revision of first edition (ISO 8936:1988)] Kommentarfrist: ISO/DIS Mekaniske vibrasjoner - Laboratoriemetode for vurdering av setevibrasjoner i kjøretøyer - Del 1: Generelle krav Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements Kommentarfrist: ISO/DIS Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust Kommentarfrist: ISO/DIS Road vehicles -- Test contaminants for filter evaluation -- Part 1: Arizona test dust Kommentarfrist: ISO/DIS Natural gas rad vehicles - Connectors Kommentarfrist: ISO/DIS Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 2: Performance and general test methods Kommentarfrist: ISO/DIS Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performances and general test methods Kommentarfrist: ISO/DIS Diesel engines -- Fuel filters -- Method for evaluating fuel/water separation efficiency Kommentarfrist: ISO-standarder ISO 3894:2015 Road vehicles -- Wheels/rims for commercial vehicles -- Test methods Erstatter A00008:20: Listenummer: 15/2015 Side: 73 av 145

74 43 Kkjøretøyteknikk ISO :2015 Cycles -- Safety requirements for bicycles -- Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles Erstatter A00008:20: ISO :2015 Cycles -- Safety requirements for bicycles -- Part 6: Frame and fork test methods Erstatter A00008:20: ISO 6519:2015 Diesel engines -- Fuel injection pumps -- Tapers for shaft ends and hubs Erstatter A00008:20: ISO :2015 Road vehicles -- Circuit breakers -- Part 4: Medium circuit breakers with tabs (Blade type), Form CB15 Erstatter A00008:20: ISO :2015 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections Erstatter A00008:20: ISO :2015 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 5: Emissionsrelated diagnostic services Erstatter A00008:20: ISO :2015 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 6: Diagnostic trouble code definitions Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TS 19321:2015 Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015) CEN/TR 16596:2013 Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs) CEN/TS :2013 Kollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication CEN/TS 16635:2014 Jernbane - Utforming for funksjonshemmede - Utstyr og komponenter ombord på rullende materiell - Toaletter Railway application - Design for PRM Use - Equipment and Components onboard Rolling Stock - Toilets Listenummer: 15/2015 Side: 74 av 145

75 43 Kkjøretøyteknikk Fastsatte norske standarder NS-EN 16661:2015 Veikjøretøyer og trykkmålere for dekk (TPG) - Samvirkingsevne mellom informasjonssystemer for dekk (TIS) og TPG - Grensesnitt og krav Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements 45 Jernbaneteknikk Standardforslag til høring - europeiske (CEN) pren Railway applications - Wheelsets and bogies - Part 1: Design guide for axles with external journals Kommentarfrist: pren Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance Kommentarfrist: Fastsatte norske standarder NS-EN 13107:2015 Sikkerhetskrav for taubaneinstallasjoner for passasjertransport - Bærende konstruksjoner Safety requirements for cableway installations designed to carry persons - Civil engineering works NS-EN 16451:2015 Jernbane - Bremser - Bremseklossholder Railway applications - Braking - Brake pad holder Tilbaketrukne norske standarder NS-EN 13107:2004 Sikkerhetskrav for taubaneinstallasjoner for passasjertransport - Bærende konstruksjoner Safety requirements for cableway installations designed to carry persons - Civil engineering works 47 Skipsbygging og marine konstruksjoner Standardforslag til høring - europeiske (CEN) pren 1914 Innlandsfartøyer - Arbeidsbåter, skipsbåter og livbåter Inland navigation vessels - Work boats, ship's boats and lifeboats Kommentarfrist: Listenummer: 15/2015 Side: 75 av 145

76 47 Skipsbygging og marine konstruksjoner pren Innlandsfartøyer - Tilkoblinger og monterte slanger for overføring av drikkevann Inland navigation vessels - Connections and assembled hoses for the transfer of potable water Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 3078 Shipbuilding -- Cargo winches Shipbuilding -- Cargo winches Kommentarfrist: ISO/DIS Ships and marine technology -- Inland navigation vessels -- Lifebuoy housings Ships and marine technology -- Inland navigation vessels -- Lifebuoy housings Kommentarfrist: ISO/DIS Ships and marine technology -- Marine cranes -- General requirements Ships and marine technology -- Marine cranes -- General requirements Kommentarfrist: ISO/DIS Ships and Marine Technology--Marine cranes -- Structural requirements Ships and Marine Technology--Marine cranes -- Structural requirements Kommentarfrist: ISO/DIS Ships and Marine Technology--Marine cranes -- Test specification and procedures Ships and Marine Technology--Marine cranes -- Test specification and procedures Kommentarfrist: ISO/DIS Ships and marine technology -- Marine cranes -- Design requirements for ice zones Ships and marine technology -- Marine cranes -- Design requirements for ice zones Kommentarfrist: ISO/DIS Ships and marine technology -- Marine cranes -- Design methods for drums Ships and marine technology -- Marine cranes -- Design methods for drums Kommentarfrist: ISO/DIS Ships and marine technology -- Marine cranes -- Technical requirements for rigging applications Ships and marine technology -- Marine cranes -- Technical requirements for rigging applications Kommentarfrist: Listenummer: 15/2015 Side: 76 av 145

77 47 Skipsbygging og marine konstruksjoner ISO/DIS Ships and marine technology -- Guidelines for the operation and installation of voyage data recorders (VDR) Kommentarfrist: Fastsatte norske standarder NS-EN ISO 10240:2004/A1:2015 Endringsblad A1 - Småbåter - Håndbok for eier/båtfører (ISO 10240:2004/Amd 1:2015) Amendment A1 - Small craft - Owner's manual (ISO 10240:2004/Amd 1:2015) 49 Luft- og romfartsteknikk Standardforslag til høring - europeiske (CEN) pren Flyplassutstyr - Spesifikke krav - Del 8: Trapper og løfteplattformer for vedlikehold Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms Kommentarfrist: ISO-standarder ISO 9940:2015 Aerospace series -- Fluid, hydraulic, phosphate ester-base, fire resistant -- Technical specification ISO 16130:2015 Aerospace series -- Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) ISO 16164:2015 Space systems -- Disposal of satellites operating in or crossing Low Earth Orbit ISO 18423:2015 Space data and information transfer systems -- Pseudo-Noise (PN) Ranging Systems Erstatter A00008:20: ISO 19632:2015 Aerospace series -- Fitting end, 24 internal cone, external thread, flareless type extra fine thread pitch inch series -- Design standard ISO 20104:2015 Space data and information transfer systems -- Producer-Archive Interface Specification (PAIS) ISO 20105:2015 Space data and information transfer systems -- Operation of CFDP over encapsulation service Listenummer: 15/2015 Side: 77 av 145

78 49 Luft- og romfartsteknikk ISO 20106:2015 Space data and information transfer systems -- Mission operations common object model ISO 20107:2015 Space data and information transfer systems -- Spacecraft onboard interface services -- Device virtualization service ISO 20205:2015 Space data and information transfer systems -- Spacecraft Onboard Interface Systems -- Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control ISO 20206:2015 Space data and information transfer systems -- IP over CCSDS space links ISO 20207:2015 Space data and information transfer systems -- CCSDS Space Link Protocols over ETSI DVB-S2 Standard ISO 20208:2015 Space data and information transfer systems -- Delta-DOR Raw Data Exchange Format ISO 20210:2015 Space data and information transfer systems -- Mission Operations Message Abstraction Layer - JAVA API ISO 20211:2015 Space data and information transfer systems -- Spacecraft Onboard Interface Services -- Device Access Service ISO 20213:2015 Space data and information transfer systems -- Spacecraft onboard interface services -- Message transfer service ISO 20214:2015 Space data and information transfer systems -- Security architecture for space data systems ISO 20215:2015 Space data and information transfer systems -- CCSDS cryptographic algorithms ISO 20216:2015 Space data and information transfer systems -- Spacecraft onboard interface services -- Device data pooling service ISO 20217:2015 Space data and information transfer systems -- Spacecraft onboard interface services -- File and packet store services ISO 21459:2015 Space data and information transfer systems -- Proximity-1 space link protocol -- Coding and synchronization sublayer Erstatter A00008:20: Listenummer: 15/2015 Side: 78 av 145

79 49 Luft- og romfartsteknikk ISO 21460:2015 Space data and information transfer systems -- Proximity-1 space link protocol -- Physical layer Erstatter A00008:20: ISO 22645:2005/Amd 1:2015 ISO 22646:2005/Amd 1:2015 ISO 22663:2015 Space data and information transfer systems -- Proximity-1 space link protocol -- Data link layer Erstatter A00008:20: ISO 22664:2013/Amd 1:2015 Rapporter fra CEN (CR) CEN/TS 16650:2014 Specification for hose couplings for petrol, oil and lubricants - High pressure couplings Fastsatte norske standarder NS-EN 3014:2015 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: MPa (at ambient temperature) / 650 C NS-EN 3015:2015 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: MPa (at ambient temperature) / 650 C NS-EN :2015 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage NS-EN :2015 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 001: Technical specification NS-EN :2015 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 002: Specification of performance and contact arrangements NS-EN :2015 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard Listenummer: 15/2015 Side: 79 av 145

80 49 Luft- og romfartsteknikk NS-EN :2015 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 009: Protective cover for receptacle - Product standard NS-EN :2015 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 010: Protective cover for plug - Product standard NS-EN :2015 Aerospace series - Cable ties for harnesses - Part 001: Technical specification NS-EN :2015 Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 C and 260 C - Part 004: DW family - Lightweight - UV Laser printable - Product standard NS-EN :2015 Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification NS-EN :2015 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification NS-EN :2015 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General Tilbaketrukne norske standarder NS-EN 3014:2001 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 Mpa(at ambient temperature)/650ºc NS-EN 3015:2001 Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa(at ambient temperature)/650ºc NS-EN :2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage NS-EN :2007 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 002: Specification of performance and contact arrangements Listenummer: 15/2015 Side: 80 av 145

81 49 Luft- og romfartsteknikk NS-EN :2013 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 001: Technical specification NS-EN :2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard NS-EN :2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 009: Protective cover for receptacle - Product standard NS-EN :2006 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 C or 200 C continuous - Part 010: Protective cover for plug - Product standard NS-EN :2006 Aerospace series - Cable ties for harnesses - Part 001: Technical specification NS-EN :2011 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General 53 Utstyr for godshåndtering Standardforslag til høring - europeiske (CEN) pren 1496 Redningsutstyr - Heisemekanismer for redning Personal fall protection equipment - Rescue lifting devices Kommentarfrist: pren Kraner - Motordrevne vinsjer og taljer - Del 1: Motordrevne vinsjer Cranes - Power driven winches and hoists - Part 1: Power driven winches Kommentarfrist: pren ISO Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 81 av 145

82 53 Utstyr for godshåndtering Standardforslag til høring - internasjonale (ISO) ISO/DIS Cranes -- Vocabulary -- Part 3: Tower cranes Kommentarfrist: ISO/DIS Mekaniske vibrasjoner - Laboratoriemetode for vurdering av setevibrasjoner i kjøretøyer - Del 1: Generelle krav Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements Kommentarfrist: ISO-standarder ISO :2015 Rough-terrain trucks -- User requirements -- Part 5: Interface between rough-terrain truck and integrated personnel work platform ISO :2015 Industrial trucks -- Verification of stability -- Part 24: Slewing variable-reach rough-terrain trucks Fastsatte norske standarder NS-EN :2015 Trucker for vanskelig terreng - Sikkerhetskrav og verifikasjon - Del 3: Grensesnitt mellom trucker med variabel rekkevidde og arbeidsplattform Rough-terrain trucks - Safety requirements and verification - Part 3: Interface between the variable-reach truck and the work platform 55 Emballasje og varedistribusjon Standardforslag til høring - europeiske (CEN) pren Plastics sacks for household waste collection - Types, requirements and test methods Plastics sacks for household waste collection - Types, requirements and test methods Kommentarfrist: pren ISO rev Emballasje - Komplette, fylte transportemballasjer og enhetslaster - Vertikal vibrasjonsprøving Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO/DIS 13355:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 668:2013/DAmd 2 Kommentarfrist: Listenummer: 15/2015 Side: 82 av 145

83 55 Emballasje og varedistribusjon ISO 668:2013/DAmd 1 Serie 1 fraktkontainere - Klassifisering, dimensjoner og rangeringer Kommentarfrist: ISO/DIS Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test Kommentarfrist: ISO-standarder ISO 12822:2015 Glass packaging H 126 crown finish -- Dimensions Fastsatte norske standarder NS-EN ISO 12818:2015 Glassemballasje - Standard toleranser for flakonger (ISO 12818:2013) Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013) NS-EN ISO 12821:2015 Glassemballasje - 26 H 180 crownkork - Mål (ISO 12821:2013) Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2013) Tilbaketrukne norske standarder NS-EN 14634:2010 Glassemballasje - 26 H 180 crownkork - Mål Glass packaging - 26 H 180 crown finish - Dimensions NS-EN 15904:2010 Glassemballasje - Standard toleranser for flakonger Glass packaging - Standard tolerances for flaconnage 59 Tekstil- og lærteknikk Standardforslag til høring - europeiske (CEN) pren Tekstiler - Tekstiler som er behandlet i vaskeri - Kontrollsystem for biologisk forurensning Textiles - Laundry processed textiles - Biocontamination control system Kommentarfrist: pren Textiles - Laundry processed textiles - Biocontamination control system Textiles - Laundry processed textiles - Biocontamination control system Kommentarfrist: Listenummer: 15/2015 Side: 83 av 145

84 59 Tekstil- og lærteknikk pren Lær - Miljøfotavtrykk - Produktkategorireglene (PCR) - Karbonfotavtrykk Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints Kommentarfrist: pren ISO 2418 Lær - Kjemisk, fysisk, mekanisk og hurtighetsprøving - Prøvetakingsplassering (ISO/DIS 2418: 2015) Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO/DIS 2418:2015) Kommentarfrist: pren ISO 2420 Lær - Fysiske og mekaniske prøvinger - Bestemmelse av tetthet og masse per arealenhet (ISO/DIS 2420: 2015) Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO/DIS 2420:2015) Kommentarfrist: pren ISO Tekstiler - Bestemmelse av slitasjemotstand av stoffer ved Martindale-metoden - Del 2: Bestemmelse av prøvekollaps (ISO/DIS :2014) Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO/DIS :2015) Kommentarfrist: pren ISO Tekstiler - Bestemmelse av slitasjemotstand for stoffer ved Martindale-metoden - Del 2: Bestemmelse av prøvesammenbrudd (ISO/DIS : 2 015) Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO/DIS :2015) Kommentarfrist: pren ISO Lær - Kjemisk bestemmelse av krom(vi) innhold i lær - Del 1: Pigmentmetode (ISO/DIS : 2015) Leather - Chemical determination of chromium(vi) content in leather - Part 1: Colorimetric method (ISO/DIS :2015) Kommentarfrist: pren ISO Lær - Kjemisk bestemmelse av krom-(vi) innhold i lær - Del 1: Pigmentmetode (ISO/DIS : 2015) Leather - Chemical determination of chromium(vi) content in leather - Part 2: Chromatographic method (ISO/DIS :2015) Kommentarfrist: pren ISO Lær - Fysiske og mekaniske prøvinger - Bestemmelse av varmemotstand i lakklær (ISO/DIS 17232: 2015) Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO/DIS 17232:2015) Kommentarfrist: pren ISO Lær - Fysiske og mekaniske prøvinger - Bestemmelse av kaldsprekktemperatur av overflatebelegg (ISO/DIS 17233: 2015) Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO/DIS 17233:2015) Kommentarfrist: Listenummer: 15/2015 Side: 84 av 145

85 59 Tekstil- og lærteknikk pren ISO Lær - Bestemmelse av nedbrytbarhet av mikroorganismer (ISO/DIS 20136: 2015) Leather - Determination of degradability by micro-organisms (ISO/DIS 20136:2015) Kommentarfrist: ISO-standarder ISO 2061:2015 Textiles -- Determination of twist in yarns -- Direct counting method Erstatter A00008:20: ISO 3379:2015 Leather -- Determination of distension and strength of surface (Ball burst method) Erstatter A00008:20: ISO 3380:2015 Leather -- Physical and mechanical tests -- Determination of shrinkage temperature up to 100 C Erstatter A00008:20: ISO 7229:2015 Rubber- or plastics-coated fabrics -- Measurement of gas permeability Erstatter A00008:20: ISO 17235:2015 Leather -- Physical and mechanical tests -- Determination of softness Erstatter A00008:20: ISO 18596:2015 Test method for staple length of dehaired cashmere -- Hand-arranging method ISO 19074:2015 Leather -- Physical and mechanical tests -- Determination of water absorption by capillary action (wicking) ISO/TS 17920:2015 Fibre ropes for offshore stationkeeping -- Aramid Fibre ropes for offshore stationkeeping -- Aramid ISO/TS 19336:2015 Fibre ropes for offshore station keeping -- Polyarylate Rapporter fra CEN (CR) CEN/TR 16741:2015 Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery Listenummer: 15/2015 Side: 85 av 145

86 59 Tekstil- og lærteknikk CEN/TS 14416:2014 Geosyntetiske membraner - Prøvingsmetode for bestemmelse av motstand mot røtter Geosynthetic barriers - Test method for determining the resistance to roots CEN/TS 14417:2014 Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers CEN/TS 14418:2014 Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers CEN/TS 16641:2014 Textile floor coverings - Guidelines for acceptable colour deviations CEN/TS 16717:2015 Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete Fastsatte norske standarder NS-EN ISO 10319:2015 Geotekstiler - Strekkprøving på brede prøvelegemer (ISO 10319:2015) Geosynthetics - Wide-width tensile test (ISO 10319:2015) NS-EN ISO :2015 Lær - Bestemmelse av etoksylerte alkylfenoler - Del 1: Direkte metode (ISO :2015) Leather - Determination of ethoxylated alkylphenols - Part 1: Direct method (ISO :2015) NS-EN ISO :2015 Lær - Bestemmelse av etoksylerte alkylfenoler - Del 2: Indirekte metode (ISO :2015) Leather - Determination of ethoxylated alkylphenols - Part 2: Indirect method (ISO :2015) Tilbaketrukne norske standarder NS-EN ISO 10319:2008 Geotekstiler - Strekkprøving på brede prøvelegemer (ISO 10319:2008) Geosynthetics - Wide-width tensile test (ISO 10319:2008) Listenummer: 15/2015 Side: 86 av 145

87 61 Konfeksjonsindustri 61 Konfeksjonsindustri Standardforslag til høring - europeiske (CEN) pren ISO Fottøy - Prøvingsmetoder for hele skoen - Øvre såleadhesjon (ISO/DIS 17708: 2015) Footwear - Test methods for whole shoe - Upper sole adhesion (ISO/DIS 17708:2015) Kommentarfrist: pren ISO Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO/DIS 20863:2015) Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO/DIS 20863:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Footwear - Test method for whole shoe - Sole adhesion Kommentarfrist: ISO/DIS Footwear -- Test methods for stiffeners and toepuffs -- Bondability Kommentarfrist: Rapporter fra CEN (CR) CEN/TR 16792:2014 Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety 65 Landbruk Standardforslag til høring - europeiske (CEN) EN 16317:2013/prA1 Fertilizers and liming materials - Determination of arsenic by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution Kommentarfrist: EN 16320:2013/prA1 Fertilizers and liming materials - Determination of mercury by vapour generation (VG) after aqua regia dissolution Kommentarfrist: EN ISO :2013/prA1 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, Cutting means acceptance criteria - Pressurized hoses of hydraulic systems (ISO :2013/DAM 1:2015) Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers - Amendment 1: OPC, Cutting means acceptance criteria - Pressurized hoses of hydraulic systems (ISO :2013/DAM 1:2015) Kommentarfrist: Listenummer: 15/2015 Side: 87 av 145

88 65 Landbruk EN ISO :2013/prA1 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, Pressurized hoses of hydraulic systems, Cutting means acceptance criteria, Clause A.2.7, Annex B Figure 4 (ISO :2013/DAM 1:2015) Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, Pressurized hoses of hydraulic systems, Cutting means acceptance criteria, Clause A.2.7, Annex B Figure 4 (ISO :2013/DAM 1:2015) Kommentarfrist: pren Dyrefôr - Metoder for prøvetaking og analyse - Bestemmelse av T-2 og HT - 2 giftstoffer, Deoksynivalenol og Zearalenon, i fôrmidler og fôrblandinger med LC -MS Animal feeding stuffs - Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS Kommentarfrist: pren ISO Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Mekaniske vibrasjoner - Laboratoriemetode for vurdering av setevibrasjoner i kjøretøyer - Del 1: Generelle krav Mechanical vibration -- Laboratory method for evaluating vehicle seat vibration -- Part 1: Basic requirements Kommentarfrist: ISO/DIS Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO and ISO (including granting and use of a manufacturer code) Kommentarfrist: ISO/DIS Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO and ISO Kommentarfrist: ISO/DIS Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO and ISO Kommentarfrist: ISO/DIS Radiofrequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO and ISO Kommentarfrist: ISO/DIS Crop protection equipment -- Droplet-size spectra from atomizers -- Measurement and classification Crop protection equipment -- Droplet-size spectra from atomizers -- Measurement and classification Kommentarfrist: Listenummer: 15/2015 Side: 88 av 145

89 65 Landbruk ISO-standarder ISO 789-3:2015 Agricultural tractors -- Test procedures -- Part 3: Turning and clearance diameters Erstatter A00008:20: ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Operator's manuals -- Content and format Erstatter A00008:20: ISO 6535:2015 Portable chain-saws -- Chain brake performance Erstatter A00008:20: ISO 8157:2015 Fertilizers and soil conditioners -- Vocabulary Erstatter A00008:20: ISO 17962:2015 Agricultural machinery -- Equipment for sowing -- Minimization of the environmental effects of fan exhaust from pneumatic systems ISO/TR :2015 ISO and Health Canada intense smoking parameters -- Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes ISO and Health Canada intense smoking parameters -- Part 2: Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes ISO/TS 19858:2015 Forestry machines -- Portable chain-saws -- Test method for evaluating saw chain oil lubricity Fastsatte norske standarder NS-EN 14757:2015 Vannundersøkelse - Prøvetaking av fisk med garn Water quality - Sampling of fish with multi-mesh gillnets NS-EN 16651:2015 Gjødsel - Bestemmelse av N-(n-butyl)-tiofosfor-syre-triamid (NBPT) og N-(n-propyl) tiofosfor-syre-triamid (NPPT) - Metode ved hjelp av høy-ytelse-væskekromatografi (HPLC) Fertilizers - Determination of N-(n-Butyl)thiophosphoric acid triamide (NBPT) and N-(n-Propyl)thiophosphoric acid triamide (NPPT) - Method using high-performance liquid chromatography (HPLC) Tilbaketrukne norske standarder NS-EN 14757:2005 Vannundersøkelse - Prøvetaking av fisk med garn Water quality - Sampling of fish with multi-mesh gillnets Listenummer: 15/2015 Side: 89 av 145

90 65 Landbruk 67 Næringsmiddelteknologi Standardforslag til høring - europeiske (CEN) pren Influence of cementitious products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials Influence of cementitious products on water intended for human consumption - Test methods - Part 4: Migration of substances from site-applied cementititous materials and associated non-cementitious products/materials Kommentarfrist: pren Food processing machinery - Soft ice cream machines - Safety and hygiene requirements Kommentarfrist: pren Food processing machinery - Combined machines and batch freezers - Safety and hygiene requirements Food processing machinery - Combined machines and batch freezers - Safety and hygiene requirements Kommentarfrist: pren Food processing machinery - Pasteurizers, vats and cream cookers - Safety and hygiene requirements Kommentarfrist: pren Food processing machinery - Cream whippers - Safety and hygiene requirements Food processing machinery - Cream whippers - Safety and hygiene requirements Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Infant formula and adult nutritionals -- Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography Infant formula and adult nutritionals -- Determination of vitamin E and vitamin A by normal phase high performance liquid chromatography Kommentarfrist: ISO/DIS Infant formula and adult nutritionals -- Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC) Infant formula and adult nutritionals -- Determination of vitamin B12 by reversed phase high performance liquid chromatography (RP-HPLC) Kommentarfrist: ISO/DIS Infant formula and adult nutritionals -- Determination of myo-inositol by liquid chromatography and pulsed amperometry Infant formula and adult nutritionals -- Determination of myo-inositol by liquid chromatography and pulsed amperometry Kommentarfrist: Listenummer: 15/2015 Side: 90 av 145

91 67 Næringsmiddelteknologi ISO/DIS Infant formula -- Determination of nucleotides by liquid chromatography Infant formula -- Determination of nucleotides by liquid chromatography Kommentarfrist: ISO/DIS Infant formula and adult nutritionals -- Determination of pantothenic acid by ultra-performance liquid chromatography and tandem mass spectrometry method (UHPLC-MS/MS) Infant formula and adult nutritionals -- Determination of pantothenic acid by ultra-performance liquid chromatography and tandem mass spectrometry method (UHPLC-MS/MS) Kommentarfrist: ISO-standarder ISO 11085:2015 Cereals, cereals-based products and animal feeding stuffs -- Determination of crude fat and total fat content by the Randall extraction method Erstatter A00008:20: ISO 16779:2015 Sensory analysis -- Assessment (determination and verification) of the shelf life of foodstuffs ISO 17780:2015 Animal and vegetable fats and oils -- Determination of aliphatic hydrocarbons in vegetable oils ISO :2015 Animal and vegetable fats and oils -- Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS -- Part 1: Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol Rapporter fra CEN (CR) CEN/TR 16699:2014 Foodstuffs - Determination of pesticide residues by GC-MS/MS - Tandem mass spectrometric parameters CEN/TS 16621:2014 Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD) Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD) CEN/TS 16707:2014 Matvarer - Metoder for å påvise genetisk modifiserte organismer og avledete produkter - Polymerase kjedereaksjon (PCR) baserte kartleggingsstrategier Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies Listenummer: 15/2015 Side: 91 av 145

92 67 Næringsmiddelteknologi CEN/TS 16731:2014 Matvarer Bestemmelse av hydridreaktive arsenikkforbindelser i ris ved atomabsorpsjonsspektrometri (Hydrid-AAS) etterfølgende syreekstraksjon Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by atomic absorption spectrometry (Hydride-AAS) following acid extraction Fastsatte norske standarder NS-EN 16187:2015 Næringsmidler - Bestemmelse av fumonisin B1 og fumonisin B2 i ferdigmat som inneholder mais for spedbarn og småbarn - HPLCmetode med immunoaffinitetskolonnerensing og fluorescensdeteksjon etter prekolonne-derivatisering Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after pre-column derivatisation NS-EN ISO :2015 Ris - Bestemmelse av amyloseinnhold - Del 1: Referansemetode (ISO :2015) Rice - Determination of amylose content - Part 1: Reference method (ISO :2015) NS-EN ISO :2015 Ris - Bestemmelse av amyloseinnhold - Del 2: Rutinemetoder (ISO :2015) Rice - Determination of amylose content - Part 2: Routine methods (ISO :2015) NS-EN ISO :2014/AC:2015 Rettelsesblad AC - Animalske og vegetabilske fett og oljer - Gasskromatografi av fettsyremetylestere - Del 1: Retningslinjer for moderne gasskromatografi av fettsyremetylestere (ISO :2014) Corrigendum AC - Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 1: Guidelines on modern gas chromatography of fatty acid methyl esters (ISO :2014) NS-EN ISO :2015 Animalske og vegetabilske fett og oljer - Gasskromatografisk analyse av fettsyremetylestere - Del 4: Kapillar gasskromatografisk metode (ISO :2015) Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 4: Determination by capillary gas chromatography (ISO :2015) NS-EN ISO 27971:2015 Korn og kornprodukter - Vanlig hvete (Triticum aestivum L.) - Bestemmelse av egenskaper i deig av handelsmel eller prøvingsmel i alveograf med konstant fuktighetstilførsel og metode for maling av prøvingsmelet (ISO 27971:2015) Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) Tilbaketrukne norske standarder NS-EN ISO :2007 Ris - Bestemmelse av amyloseinnhold - Del 1: Referansemetode (ISO :2007) Rice - Determination of amylose content - Part 1: Reference method (ISO :2007) NS-EN ISO :2007 Ris - Bestemmelse av amyloseinnhold - Del 2: Rutinemetoder (ISO :2007) Rice - Determination of amylose content - Part 2: Routine methods (ISO :2007) Listenummer: 15/2015 Side: 92 av 145

93 67 Næringsmiddelteknologi NS-EN ISO 27971:2008 Korn og kornprodukter - Vanlig hvete (Triticum aestivum L.) - Bestemmelse av reologiske egenskaper i deig av handelsmel eller prøvemel i alveograf med konstant fuktighetstilførsel, samt metode for maling av prøvemelet (ISO 27971:2008) Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2008) 71 Kjemiteknikk Standardforslag til høring - europeiske (CEN) pren 46-1 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) Kommentarfrist: pren 46-2 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) Kommentarfrist: pren 47 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) Kommentarfrist: pren 49-1 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) Kommentarfrist: pren Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods Kommentarfrist: pren Biobaserte produkter - Biobasert karboninnhold - Bestemmelse av biobasert karboninnhold ved bruk av radiokarbon metode Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method Kommentarfrist: Listenummer: 15/2015 Side: 93 av 145

94 71 Kjemiteknikk pren Dyrefôr - Metoder for prøvetaking og analyse - Bestemmelse av T-2 og HT - 2 giftstoffer, Deoksynivalenol og Zearalenon, i fôrmidler og fôrblandinger med LC -MS Animal feeding stuffs - Methods of sampling and analysis - Determination of T-2 and HT-2 toxins, Deoxynivalenol and Zearalenone, in feed materials and compound feed by LC-MS Kommentarfrist: ISO-standarder ISO :2015 Gas analysis -- Preparation of calibration gas mixtures -- Part 1: Gravimetric method for Class I mixtures Erstatter A00008:20:024663,A00008:20: ISO 13083:2015 Surface chemical analysis -- Scanning probe microscopy -- Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes ISO 17109:2015 Surface chemical analysis -- Depth profiling -- Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films ISO/TS 18507:2015 Surface chemical analysis -- Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis Surface chemical analysis -- Use of Total Reflection X-ray Fluorescence spectroscopy in biological and environmental analysis Rapporter fra CEN (CR) CEN ISO/TR 24475:2013 Cosmetics - Good Manufacturing Practices - General training document (ISO/TR 24475:2010) CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) CEN/TR 16589:2013 Laboratorieinstallasjoner - Gripeenheter med leddet ekstrakt arm Laboratory installations - Capture devices with articulated extract arm CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TS 12404:2015 Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory method CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method Listenummer: 15/2015 Side: 94 av 145

95 71 Kjemiteknikk 73 Gruvedrift og mineraler Standardforslag til høring - internasjonale (ISO) ISO/DIS Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI) Kommentarfrist: ISO-standarder ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks -- Determination of the tumble and abrasion indices Erstatter A00008:20: ISO :2015 Iron ores -- Determination of sulfur content -- Part 2: Combustion/titration method Erstatter A00008:20: ISO :2015 Iron ores -- Determination of sulfur content -- Part 3: Combustion/infrared method Erstatter A00008:20: ISO 4695:2015 Iron ores for blast furnace feedstocks -- Determination of the reducibility by the rate of reduction index Erstatter A00008:20: ISO :2015 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 1: Reduction with CO, CO2, H2 and N2 Erstatter A00008:20: ISO :2015 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by static method -- Part 2: Reduction with CO and N2 Erstatter A00008:20: ISO 4700:2015 Iron ore pellets for blast furnace and direct reduction feedstocks -- Determination of the crushing strength Erstatter A00008:20: ISO 7215:2015 Iron ores for blast furnace feedstocks -- Determination of the reducibility by the final degree of reduction index Erstatter A00008:20: ISO 7992:2015 Iron ores for blast furnace feedstocks -- Determination of reduction under load Erstatter A00008:20: Listenummer: 15/2015 Side: 95 av 145

96 73 Gruvedrift og mineraler ISO 8371:2015 Iron ores for blast furnace feedstocks -- Determination of the decrepitation index Erstatter A00008:20: ISO 10204:2015 Iron ores -- Determination of magnesium -- Flame atomic absorption spectrometric method Erstatter A00008:20: ISO 11256:2015 Iron ore pellets for shaft direct-reduction feedstocks -- Determination of the clustering index Erstatter A00008:20: ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks -- Determination of the low-temperature reduction-disintegration index and degree of metallization Erstatter A00008:20: ISO 11258:2015 Iron ores for shaft direct-reduction feedstocks -- Determination of the reducibility index, final degree of reduction and degree of metallization Erstatter A00008:20: ISO 11536:2015 Iron ores -- Determination of loss on ignition -- Gravimetric method ISO 13930:2015 Iron ores for blast furnace feedstocks -- Determination of low-temperature reduction-disintegration indices by dynamic method Erstatter A00008:20: ISO 15634:2015 Iron ores -- Determination of chromium content -- Flame atomic absorption spectrometric method Erstatter A00008:20: ISO/TR 18230:2015 Iron ores -- Determination of loss on ignition -- Non-oxidised ores 75 Petroleumsteknologi og beslektet teknologi Standardforslag til høring - europeiske (CEN) pren Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger Viscometer Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger Viscometer Kommentarfrist: Listenummer: 15/2015 Side: 96 av 145

97 75 Petroleumsteknologi og beslektet teknologi pren Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods Kommentarfrist: pren Flytende petroleumsprodukter - Bestemmelse av tenningskvalitet for diesel brennstoff - BASF motor metode Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method Kommentarfrist: pren ISO 2719 rev Bestemmelse av flammepunkt - Pensky-Martensmetoden med lukket digel (ISO/DIS 2719:2015) Determination of flash point - Pensky-Martens closed cup method (ISO/DIS 2719:2015) Kommentarfrist: pren ISO 3924 Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO/DIS 3924:2015) Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO/DIS 3924:2015) Kommentarfrist: pren ISO Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO/DIS 14224:2015) Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment (ISO/DIS 14224:2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO/DIS :2015) Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO/DIS :2015) Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 97 av 145

98 75 Petroleumsteknologi og beslektet teknologi pren ISO Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO/DIS 17776:2015) Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO/DIS 17776:2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 2719 Determination of flash point - Pensky-Martens closed cup method [Revision of second edition (ISO 2719:1988)] Determination of flash point - Pensky-Martens closed cup method [Revision of second edition (ISO 2719:1988)] Kommentarfrist: ISO/DIS 3924 Petroleum products - Determination of boiling range distribution - Gas chromatography method Kommentarfrist: ISO/DIS Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation Kommentarfrist: Listenummer: 15/2015 Side: 98 av 145

99 75 Petroleumsteknologi og beslektet teknologi ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 1: Anvendelse og materialer Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Applications and materials Kommentarfrist: ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 2: Kvalifisering og tilvirkning Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture Kommentarfrist: ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 3: Systemdimensjonering Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design Kommentarfrist: ISO/DIS Petroleum- og naturgassindustri - Glassfiberarmerte plastrør - Del 4: Fabrikasjon, intallasjon og drift Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation Kommentarfrist: ISO/DIS Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for identification and assessment af hazardous events Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Offshore production installations -- Major Accident hazard management during the design of new installations Kommentarfrist: ISO/DIS Specifications for offshore modular drilling rigs on fixed platforms Specifications for offshore modular drilling rigs on fixed platforms Kommentarfrist: ISO/DIS Solid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets Solid biofuels -- Determination of fines content in quantities of pellets Kommentarfrist: ISO/DIS Standard Cost Coding System for oil and gas production and processing facilities Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria Kommentarfrist: Listenummer: 15/2015 Side: 99 av 145

100 75 Petroleumsteknologi og beslektet teknologi ISO/DIS Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria Kommentarfrist: Rapporter fra CEN (CR) CEN ISO/TR :2013 Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR :2009) CEN ISO/TR :2013 Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation (ISO/TR :2012) CEN ISO/TS 12747:2013 Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011) CEN/TR :2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method CEN/TR :2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 15745:2015 Flytende petroleumsprodukter Bestemmelse av hydrokarbontyper og oksygenater via multidimensjonal gasskromatografimetode Ringtest forskningsrapport Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination CEN/TR 16680:2014 Flytende petroliumsprodukter - Undersøkelse av indre dieselinnsprøytning mekanismer for fastsittende avleiringer og påvirkningene på korrosjonshemmere Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors CEN/TS :2014 Bærekraftig fremstilt biomasse til energianvendelser Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance Listenummer: 15/2015 Side: 100 av 145

101 75 Petroleumsteknologi og beslektet teknologi Fastsatte norske standarder NS-EN 16270:2015 Drivstoff - Bestemmelse av komponenter med høyt kokepunkt i bensin og etanol (E85) innbefattet fettsyremetylestere - Gasskromatografisk metode Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method NS-EN ISO :2015 Petroleums- og naturgassindustri - Bore- og produksjonsutstyr - Del 1: Elektriske nedsenkbare pumpesystemer for kunstig løft (ISO :2015) Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO :2015) NS-EN ISO 16903:2015 Petroleums- og naturgassindustri - Egenskaper ved LNG som påvirker utforming og valg av materialer (ISO 16903:2015) Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015) NS-EN ISO 16948:2015 Fast biobrensel - Bestemmelse av totalt innhold av karbon, hydrogen og nitrogen (ISO 16948:2015) Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) NS-EN ISO 16968:2015 Fast biobrensel - Bestemmelse av mindre komponenter (ISO 16968:2015) Solid biofuels - Determination of minor elements (ISO 16968:2015) NS-EN ISO 17945:2015 Petroleumsindustri, petrokjemisk industri og naturgassindustri - Metalliske materialer som er motstandsdyktige mot sulfidspenningssprekking i korroderende miljøer innenfor oljeraffineri (ISO 17945:2015) Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) Tilbaketrukne norske standarder NS-EN 1160:1996 Anlegg og utstyr for flytende naturgass - Generelle kjennetegn for flytende naturgass Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas NS-EN 15104:2011 Fast biobrensel - Bestemmelse av totalt innhold av karbon, hydrogen og nitrogen - Instrumentelle metoder Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods NS-EN 15297:2011 Fast biobrensel - Bestemmelse av sporelementer - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V og Zn Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn Listenummer: 15/2015 Side: 101 av 145

102 75 Petroleumsteknologi og beslektet teknologi NS-EN 16270:2012 Drivstoff - Bestemmelse av komponenter med høyt kokepunkt i bensin innbefattet fettsyremetylestere - Gasskromatografisk metode Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol - Gas chromatographic method 77 Metallurgi Standardforslag til høring - europeiske (CEN) pren Ventiler - Materialer for hus og deksler - Del 4: Kobberlegeringer spesifisert i europeiske standarder Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards Kommentarfrist: pren 1563 Støperiteknikk - Kulegrafittjern Founding - Spheroidal graphite cast irons Kommentarfrist: pren Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Kommentarfrist: pren ISO Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO/DIS 148-1:2015) Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO/DIS 148-1:2015) Kommentarfrist: pren ISO Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO/DIS 148-2:2015) Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO/DIS 148-2:2015) Kommentarfrist: pren ISO Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO/DIS 148-3:2015) Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO/DIS 148-3:2015) Kommentarfrist: pren ISO 4885 Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Ferrous products - Heat treatments - Vocabulary (ISO/DIS 4885:2015) Kommentarfrist: Listenummer: 15/2015 Side: 102 av 145

103 77 Metallurgi pren ISO Kirurgiske instrumenter - Materialer - Del1: Metaller (ISO/DIS :2015) Surgical instruments - Materials - Part 1: Metals (ISO/DIS :2015) Kommentarfrist: pren ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests (ISO/DIS 9227:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Metallic materials -- Charpy pendulum impact test -- Part 1: Test method Kommentarfrist: ISO/DIS Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines Kommentarfrist: ISO/DIS Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines Kommentarfrist: ISO/DIS 3575 Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities Kommentarfrist: ISO/DIS 4885 Ferrous products - Vacabulary - heat treatments Kommentarfrist: ISO/DIS 4885 Ferrous products -- Heat treatments -- Vocabulary Ferrous products -- Heat treatments -- Vocabulary Kommentarfrist: ISO/DIS 9227 Korrosjonsprøvinger i kunstige atmosfærer - Salttåke prøvinger Corrosion tests in artificial atmospheres -- Salt spray tests Kommentarfrist: ISO/DIS Metallic materials - Fatigue testing - Axial strain-controlled method Kommentarfrist: Listenummer: 15/2015 Side: 103 av 145

104 77 Metallurgi ISO/DIS Hot-rolled steel sheet in coils of structural quality and heavy thickness Kommentarfrist: ISO/DIS Cold-reduced steel sheet of high tensile strength and low yield point with improved formability Kommentarfrist: ISO-standarder ISO 8044:2015 Corrosion of metals and alloys -- Basic terms and definitions Erstatter A00008:20: ISO :2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method Erstatter A00008:20: ISO :2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines Erstatter A00008:20: ISO :2015 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks Erstatter A00008:20: ISO 17918:2015 Corrosion of metals and alloys -- Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement Rapporter fra CEN (CR) CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method CEN/TR 16748:2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting CEN/TR 16749:2014 Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products Listenummer: 15/2015 Side: 104 av 145

105 77 Metallurgi CEN/TS 13388:2015 Copper and copper alloys - Compendium of compositions and products CEN/TS 15656:2015 Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method Fastsatte norske standarder NS-EN 15079:2015 Kobber og kobberlegeringer - Analyse ved bruk av optisk gnistemisjonsspektrometri (S-OES) Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) NS-EN ISO 16701:2015 Korrosjon av metaller og legeringer - Korrosjon i kunstig luft - Akselerert korrosjonsprøving med eksponering under kontrollerte forhold for fuktighetssykluser og intermitterende sprøyting med saltløsning (ISO 16701:2015) Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015) Tilbaketrukne norske standarder NS-EN 15079:2007 Kobber og kobberlegeringer - Analyse ved bruk av optisk gnistemisjonsspektrometri (S-OES) Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES) NS-EN ISO 16701:2008 Korrosjon av metaller og legeringer - Korrosjon i kunstig luft - Akselerert korrosjonsprøving med eksponering under kontrollerte forhold for fuktighetssykluser og intermitterende sprøyting med saltløsning (ISO 16701:2003) Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2003) 79 Treteknikk Standardforslag til høring - europeiske (CEN) pren Bevaring av kulturminner - Veiledning for forvaltning av vannmettet tre i områder på land av arkeologisk betydning Conservation of cultural heritage - Guidelines for management of waterlogged wood on terrestrial sites of archaeological significance Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 5: Determination of strength in compression perpendicular to grain Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 5: Determination of strength in compression perpendicular to grain Kommentarfrist: Listenummer: 15/2015 Side: 105 av 145

106 79 Treteknikk ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 10: Determination of impact bending strength Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 10: Determination of impact bending strength Kommentarfrist: ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 12: Determination of static hardness Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 12: Determination of static hardness Kommentarfrist: ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 13: Determination of radial and tangential shrinkage Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 13: Determination of radial and tangential shrinkage Kommentarfrist: ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 14: Determination of volumetric shrinkage Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 14: Determination of volumetric shrinkage Kommentarfrist: ISO/DIS Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 17: Determination of ultimate stress in compression parallel to grain Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 17: Determination of ultimate stress in compression parallel to grain Kommentarfrist: ISO/DIS Trebaserte plater - Sponplate Wood-based panels -- Particleboard Kommentarfrist: ISO/DIS Trebaserte plater - Tørr-prosessert fiberplate Wood-based panels -- Dry-process fibreboard Kommentarfrist: ISO/DIS Wood-based panels -- Fibreboard, particleboard and oriented strand board (OSB) -- Vocabulary Kommentarfrist: Listenummer: 15/2015 Side: 106 av 145

107 79 Treteknikk ISO-standarder ISO 2385:2015 Packed cork -- Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste -- Sampling to determine moisture content Erstatter A00008:20: ISO 2386:2015 Packed cork -- Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste -- Determination of moisture content Erstatter A00008:20: ISO 18217:2015 Safety of woodworking machines -- Edge-banding machines fed by chain(s) Rapporter fra CEN (CR) CEN/TR 12872:2014 Trebaserte plater - Veiledning for bruk av bærende plater i gulv, vegger og tak Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs CEN/TR 16816:2015 End use performance of wood products - Utilisation and improvement of existing methods to estimate service life CEN/TS 16368:2014 Lette sponplater - Krav Lightweight Particleboards - Specifications CEN/TS 16526:2013 Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics 81 Glassindustri og keramisk industri Standardforslag til høring - europeiske (CEN) pren Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for substitution, tolerances and visual quality Kommentarfrist: pren Bygningsglass - Isolerruter - Del 2: Langtidsprøving og krav til fukttetthet Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration Kommentarfrist: Listenummer: 15/2015 Side: 107 av 145

108 81 Glassindustri og keramisk industri pren Bygningsglass - Isolerruter - Del 3: Langtidsprøving og krav til gasstetthet samt toleranser for gasskonsentrasjon Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances Kommentarfrist: pren Glass in Building - Insulating Glass Units - Part 4: Methods of test for the physical attributes of edge seal components and inserts Kommentarfrist: pren Bygningsglass - Isolerruter - Del 5: Evaluering av samsvar Glass in building - Insulating glass units - Part 5: Evaluation of conformity Kommentarfrist: pren Bygningsglass - Isolerruter - Del 6: Produksjonskontroll med tilhørende prøving Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 3536 Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Road vehicles - Safety glazing materials - Vocabulary [Revision of first edition (ISO 3536:1992)] Kommentarfrist: ISO/DIS Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for linear thermal expansion of monolithic ceramics by push rod technique Kommentarfrist: ISO-standarder ISO 15733:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure -- Determination of tensile properties Erstatter A00008:20: Gummi- og plastindustri Standardforslag til høring - europeiske (CEN) pren Adhesives for thermoplastic piping systems for fluids under pressure - Specifications Adhesives for thermoplastic piping systems for fluids under pressure - Specifications Kommentarfrist: Listenummer: 15/2015 Side: 108 av 145

109 83 Gummi- og plastindustri pren Biobaserte produkter - Biobasert karboninnhold - Bestemmelse av biobasert karboninnhold ved bruk av radiokarbon metode Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method Kommentarfrist: pren ISO rev Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO/DIS 294-5:2015) Kommentarfrist: pren ISO Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO/DIS :2015) Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO/DIS :2015) Kommentarfrist: pren ISO 8028 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2015) Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2015) Kommentarfrist: pren ISO Plastics - Generic identification and marking of plastics products (ISO/DIS 11469:2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO/DIS :2015) Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO/DIS :2015) Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO/DIS :2015) Kommentarfrist: pren ISO Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS :2015) Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 109 av 145

110 83 Gummi- og plastindustri pren ISO Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 5359:2014/DAmd 1 Anestesi og respirasjonsutstyr - Lavtrykks-slangekonstruksjoner for bruk med medisinske gasser (ISO/FDIS 5359:2014) Kommentarfrist: ISO/DIS 37 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties Kommentarfrist: ISO/DIS Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for determining the anisotropy of the properties of injection-moulded plastics Kommentarfrist: ISO/DIS Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers Kommentarfrist: ISO/DIS Plastics - Symbols and abbreviated terms - Part 3 : Plasticizers (Revision of first edition ISO :1988) Kommentarfrist: ISO/DIS Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography Kommentarfrist: ISO/DIS Plastics - Generic identification and marking of plastics products (Revision of first edition (ISO 11469:1993) Kommentarfrist: ISO/DIS Plastics -- Generic identification and marking of plastics products Plastics -- Generic identification and marking of plastics products Kommentarfrist: Listenummer: 15/2015 Side: 110 av 145

111 83 Gummi- og plastindustri ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design Kommentarfrist: ISO/DIS Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation Kommentarfrist: ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 1: Anvendelse og materialer Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Applications and materials Kommentarfrist: ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 2: Kvalifisering og tilvirkning Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture Kommentarfrist: ISO/DIS Petroleums- og naturgassindustri - Glassfiberarmerte plastrør - Del 3: Systemdimensjonering Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design Kommentarfrist: ISO/DIS Petroleum- og naturgassindustri - Glassfiberarmerte plastrør - Del 4: Fabrikasjon, intallasjon og drift Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation Kommentarfrist: ISO/DIS Plastics - Determination of the ultimate anaerobic biodegradability in an aqueous system - Method by measurement of biogas production Kommentarfrist: Listenummer: 15/2015 Side: 111 av 145

112 83 Gummi- og plastindustri ISO-standarder ISO 1125:2015 Rubber compounding ingredients -- Carbon black -- Determination of ash Erstatter A00008:20:027008,A00008:20: ISO 1658:2015 Natural rubber (NR) -- Evaluation procedure Erstatter A00008:20: ISO :2015 Rubber or plastics covered rollers -- Specifications -- Part 1: Requirements for hardness Erstatter A00008:20: ISO 6133:2015 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength Erstatter A00008:20: ISO :2015 Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics Erstatter A00008:20: ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards ISO :2015 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 1: Guidelines for the approach ISO :2015 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 2: Test specimens ISO :2015 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 3: Test methods ISO :2015 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 4: Environmental conditions for durability ISO :2015 Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 1: 1H-NMR and IR with cast-film method Erstatter A00008:20:040322,A00008:20: ISO :2015 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method Erstatter A00008:20: Listenummer: 15/2015 Side: 112 av 145

113 83 Gummi- og plastindustri Rapporter fra CEN (CR) CEN ISO/TR :2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR :2011) CEN/TS 14578:2013 Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) Fastsatte norske standarder NS-EN 16661:2015 Veikjøretøyer og trykkmålere for dekk (TPG) - Samvirkingsevne mellom informasjonssystemer for dekk (TIS) og TPG - Grensesnitt og krav Road vehicles and Tyre Pressure Gauges (TPG) - Interoperability between Tyre Information Systems (TIS) and TPG - Interfaces and Requirements NS-EN ISO 13802:2015 Plast - Verifikasjon av pendelslagmaskin - Charpy-, Izod- og strekk-slagprøving (ISO 13802:2015) Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015) Tilbaketrukne norske standarder NS-EN ISO 13802:2006 Plast - Verifikasjon av pendelslagmaskin - Charpy-, Izod- og strekk-slagprøving (ISO 13802:1999, innbefattet rettelsesblad 1:2000) Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000) 85 Papirteknikk Standardforslag til høring - europeiske (CEN) pren ISO Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO/DIS :2015) Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 113 av 145

114 85 Papirteknikk pren ISO Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO/DIS :2015) Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO/DIS :2015) Kommentarfrist: pren ISO rev Tissue paper and tissue products - Part 6: Determination of grammage Tissue paper and tissue products - Part 6: Determination of grammage Kommentarfrist: ISO-standarder ISO 302:2015 Pulps -- Determination of Kappa number Erstatter A00008:20: Maling- og lakkindustri Standardforslag til høring - europeiske (CEN) pren ISO 8028 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2015) Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter Kommentarfrist: ISO/DIS Paints and varnishes -- Determination of ph value -- Part 1: ph electrodes with glass membrane Kommentarfrist: ISO/DIS Paints and varnishes -- Determination of ph value -- Part 2: ph electrodes with ISFET technology Kommentarfrist: ISO/DIS Paints and varnishes -- Wedge-cut method for determination of film thickness (scribe and drill method) Kommentarfrist: ISO-standarder ISO :2015 Functional pigments and extenders for special applications -- Part 1: Nanoscale calcium carbonate for sealant application Listenummer: 15/2015 Side: 114 av 145

115 87 Maling- og lakkindustri Rapporter fra CEN (CR) CEN/TS 16498:2013 Maling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Vurdering av garvesyre misfarging Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining CEN/TS 16499:2013 Maling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Motstand mot klumping av maling og lakk på treverk Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood CEN/TS 16700:2014 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate CEN/TS 16766:2015 Bio-based solvents - Requirements and test methods Fastsatte norske standarder NS-EN ISO :2015 Maling og lakk - Bestemmelse av volumprosent av ikke-flyktige stoffer - Del 3: Bestemmelse av ikke-flyktige forbindelser ved beregning i henhold til ISO 3251, tettheten til belegget og tettheten til løsningsmidlet i belegget (ISO :2015) Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO :2015) Tilbaketrukne norske standarder NS-EN ISO 23811:2009 Maling og lakk - Bestemmelse av ikke-flyktige stoffers volum i prosent ved måling av innholdet av slike stoffer samt beleggmaterialets densitet og beregning av teoretisk dekkevne (ISO 23811:2009) Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009) 90 Fastsatte norske standarder NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no Listenummer: 15/2015 Side: 115 av 145

116 90 NS 3420-T:2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del T: Maler- og beleggarbeider Specification texts for building, construction and installations - Part T: Painting, papering and flooring Språk: no Tilbaketrukne norske standarder NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no NS 3420-T:2013 Beskrivelsestekster for bygg, anlegg og installasjoner - Del T: Maler- og beleggarbeider Specification texts for building, construction and installations - Part T: Painting, papering and flooring Språk: no NS-EN 12845:2004+A2:2009 Faste brannslokkesystemer - Automatiske sprinklersystemer - Dimensjonering, installering og vedlikehold Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance Språk: no 91 Bygningsmaterialer og bygging Standardforslag til høring - europeiske (CEN) EN 206:2013/prA1 Concrete - Specification, performance, production and conformity Kommentarfrist: EN :2011/prA1 Utvidet anvendelse av resultater fra prøving av brannmotstanden til tekniske installasjoner - Del 1: Kanaler Extended application of results from fire resistance tests for service installations - Part 1: Ducts Kommentarfrist: EN ISO 15148:2002/prA1 Byggematerialers og -produkters hygrotermiske egenskaper - Bestemmelse av vannabsorpsjonkoeffisient ved delvis nedsenking Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion - Amendment 1 (ISO 15148:2002/DAM 1:2015) Kommentarfrist: Listenummer: 15/2015 Side: 116 av 145

117 91 Bygningsmaterialer og bygging pren Sikkerhet for rulletrapper og rullende fortau - Del 1: Utførelse og installasjon Safety of escalators and moving walks - Part 1: Construction and installation Kommentarfrist: pren Metode for prøving av flygeaske - Del 1: Bestemmelse av fritt kalsiumoksidinnhold Method of testing fly ash - Part 1: Determination of free calcium oxide content Kommentarfrist: pren Metode for prøving av flygeaske - Del 2: Bestemmelse av finhet ved våtsiling Method of testing fly ash - Part 2: Determination of fineness by wet sieving Kommentarfrist: pren Utførelse av stålkonstruksjoner og aluminiumkonstruksjoner - Del 2: Tekniske krav til stålkonstruksjoner Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures Kommentarfrist: pren 1111 Sanitær tappearmatur - Termostatbatterier (PN 10) - Generelle tekniske krav Sanitary Tapware - Thermostatic Mixing Valves (PN 10) - General Technical Specification Kommentarfrist: pren Gullies for buildings - Part 5: Gullies with light liquids closure Kommentarfrist: pren Bygningsglass - Isolerruter - Del 2: Langtidsprøving og krav til fukttetthet Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration Kommentarfrist: pren 1287 Sanitær tappearmatur - Termostatbatterier i lavtrykksanlegg - Generelle tekniske krav Sanitary Tapware - Low pressure thermostatic mixing valves - General Technical Specification Kommentarfrist: pren rev Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 3: Repair concrete and mortars Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 3: Repair concrete and mortars Kommentarfrist: Listenummer: 15/2015 Side: 117 av 145

118 91 Bygningsmaterialer og bygging pren 1766 rev Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing Kommentarfrist: pren Tilslag for betong Aggregates for concrete Kommentarfrist: pren Porter - Bruksanvisning Industrial, commercial and garage doors and gates - Information for use Kommentarfrist: pren Tilslag for bituminøse masser og overflatebehandlinger for veger, flyplasser og andre trafikkarealer Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas Kommentarfrist: pren Tilslag for mørtel Aggregates for mortar Kommentarfrist: pren Gas-fired domestic appliance producing hot water - Part 6: Assessment of energy consumption of ad-sorption and ab-sorption heat pumps Kommentarfrist: pren Tilslag for mekanisk stabiliserte og hydraulisk stabiliserte materialer til bruk i bygg- og anleggsarbeid og vegbygging Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction Kommentarfrist: pren Vassbyggingsstein (Armourstone) - Del 1: Spesifikasjoner Armourstone - Part 1: Specification Kommentarfrist: pren Tilslag for jernbaneballast Aggregates for railway ballast Kommentarfrist: pren Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Kommentarfrist: Listenummer: 15/2015 Side: 118 av 145

119 91 Bygningsmaterialer og bygging pren Bygningsbeslag - Låse og fallelåser - Elektromekanisk drevne låser og sluttstykker - Krav og prøvingsmetoder Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods Kommentarfrist: pren Samsvarsvurdering av tilslag - Innledende typeprøving og produksjonskontroll Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control Kommentarfrist: pren Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air Kommentarfrist: pren Bygningenes energiytelse Del 1: Inneklimaparametere for dimensjonering og vurdering av bygningers energiytelse inkludert inneluftkvalitet, termisk miljø, belysning og akustikk Modul M1-6 Energy performance of buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6 Kommentarfrist: pren Thermal insulation products for buildings - Factory made reflective insulation products (RI) - Specification Kommentarfrist: pren Bygningsbeslag - Eelektromekaniske hengelåser - Krav og prøvingsmetoder Building hardware - Mechatronic padlocks - Requirements and test methods Kommentarfrist: pren Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings Kommentarfrist: pren Cement and building lime - Environmental product declarations - Product category rules complementary to EN Kommentarfrist: pren ISO Termiske egenskaper til vinduer, dører og skodder - Beregning av varmegjennomgangskoeffisient - Del 2: Numerisk metode for karm og ramme Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics pipings systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO/DIS :2015) Plastics pipings systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 119 av 145

120 91 Bygningsmaterialer og bygging pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO/DIS :2015) Kommentarfrist: pren ISO Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO/DIS :2015) Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO/DIS :2015) Kommentarfrist: pren ISO Bygningers energiytelse Indikatorer, krav og attestering Del 1: Generelle aspekter og anvendelse av den totale energiytelsen Energy performance of buildings - Indicators, requirements and certification - Part 1: General aspects and application to the overall energy performance (ISO/DIS :2015) Kommentarfrist: pren ISO Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO/DIS :2015) Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO/DIS :2015) Kommentarfrist: pren ISO Bygningers energiytelse Termisk, sol- og dagslysegenskaper til bygningskomponenter og -deler Del 1: Forenklet beregningsmetode av sol- og dagslysegenskaper for solskjermingsutstyr kombinert med glass Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO/DIS :2015) Kommentarfrist: pren ISO Bygningers energiytelse Termisk, sol- og dagslysegenskaper til bygningskomponenter og -deler Del 3: Detaljert beregningsmetode av sol- og dagslysegenskaper for solskjermingsutstyr kombinert med glass Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 15148:2002/DAmd 1 Kommentarfrist: Listenummer: 15/2015 Side: 120 av 145

121 91 Bygningsmaterialer og bygging ISO/DIS Testing of concrete -- Part 2: Properties of fresh concrete Kommentarfrist: ISO/DIS Testing of concrete -- Part 2: Properties of fresh concrete Testing of concrete -- Part 2: Properties of fresh concrete Kommentarfrist: ISO/DIS 6946 Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation method Kommentarfrist: ISO/DIS Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames Thermal performance of windows, doors and shutters -- Calculation of thermal transmittance -- Part 2: Numerical method for frames Kommentarfrist: ISO/DIS Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations Kommentarfrist: ISO/DIS Ceramic tiles -- Part 16: Determination of small colour differences and light reflectance values Kommentarfrist: ISO/DIS Timber structures -- Determination of characteristic values -- Part 3: Glued laminated timber Kommentarfrist: ISO/DIS Timber structures -- Determination of characteristic values -- Part 4: Engineered wood products Timber structures -- Determination of characteristic values -- Part 4: Engineered wood products Kommentarfrist: ISO/DIS Timber structures -- Glued laminated timber -- Component performance and production requirements Timber structures -- Glued laminated timber -- Component performance and production requirements Kommentarfrist: ISO/DIS Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods Kommentarfrist: ISO/DIS Thermal performance of building components -- Dynamic thermal characteristics -- Calculation methods Kommentarfrist: Listenummer: 15/2015 Side: 121 av 145

122 91 Bygningsmaterialer og bygging ISO/DIS Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation method Kommentarfrist: ISO/DIS Thermal bridges in building construction -- Linear thermal transmittance -- Simplified methods and default values Kommentarfrist: ISO/DIS Plastics piping systems for hot and cold water - Polybutylene (PB) - Part 1: General Kommentarfrist: ISO/DIS Plastics piping systems for hot and cold water - Polybutylene (PB) - Part 2: Pipes Kommentarfrist: ISO/DIS Plastics piping systems for hot and cold water - Polybutylene (PB) - Part 3: Fittings Kommentarfrist: ISO/DIS Plastics piping systems for hot and cold water - Polybutylene (PB) - Part 5: Fitness for purpose of the system Kommentarfrist: ISO/DIS Thermal insulation products - Sheep wool mat and board Thermal insulation products - Sheep wool mat and board Kommentarfrist: ISO/DIS Timber structures -- Diaphragms -- Static load tests for horizontal diaphragms including floors and roofs Timber structures -- Diaphragms -- Static load tests for horizontal diaphragms including floors and roofs Kommentarfrist: ISO/DIS Energy performance of buildings -- Overarching EPB assessment -- Part 1: General framework and procedures Kommentarfrist: ISO/DIS Energy performance of buildings -- Indicators, requirements and certification -- Part 1: General aspects and application to the overall energy performance Energy performance of buildings -- Indicators, requirements and certification -- Part 1: General aspects and application to the overall energy performance Kommentarfrist: Listenummer: 15/2015 Side: 122 av 145

123 91 Bygningsmaterialer og bygging ISO/DIS Bygningers energiytelse Indikatorer for delkrav til energiytelse relatert til termisk energibalanse og konstruksjonegenskaper Del 1: Oversikt over alternativer Energy performance of buildings -- Indicators for partial EPB requirements related to thermal energy balance and fabric features -- Part 1: Overview of options Kommentarfrist: ISO/DIS Energy performance of buildings -- Thermal, solar and daylight properties of building components and elements -- Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing Energy performance of buildings -- Thermal, solar and daylight properties of building components and elements -- Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing Kommentarfrist: ISO/DIS Energy performance of buildings -- Thermal, solar and daylight properties of building components and elements -- Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing Energy performance of buildings -- Thermal, solar and daylight properties of building components and elements -- Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing Kommentarfrist: ISO-standarder ISO :2015 Building construction machinery and equipment -- Concrete placing systems for stationary equipment -- Part 1: Terminology and commercial specifications ISO :2015 Building construction machinery and equipment -- Mobile crushers -- Part 1: Terminology and commercial specifications Erstatter A00008:20: ISO/TR :2015 Ceramic tiles -- Guidelines for installation -- Part 1: Installation of ceramic wall and floor tiles Ceramic tiles -- Guidelines for installation -- Part 1: Installation of ceramic wall and floor tiles ISO/TR :2015 Ceramic tiles -- Guidelines for installation -- Part 2: Installation of thin ceramic wall and floor tiles and panels Ceramic tiles -- Guidelines for installation -- Part 2: Installation of thin ceramic wall and floor tiles and panels Rapporter fra CEN (CR) CEN/TR 81-12:2014 Safety rules for the construction and installation of lifts - Basics and interpretations - Part 12: Use of EN and EN in specific markets CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) Listenummer: 15/2015 Side: 123 av 145

124 91 Bygningsmaterialer og bygging CEN/TR :2014 Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC Part 2: National Pages related to CEN/TC 234 standards CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation CEN/TR 14245:2014 Cement - Guidelines for the application of EN Conformity Evaluation CEN/TR 16496:2013 Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods CEN/TR 16563:2013 Principles of the equivalent durability procedure CEN/TR 16625:2013 Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic CEN/TR 16632:2014 Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations CEN/TR 16639:2014 Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept CEN/TR 16676:2014 Energy losses by industrial door CEN/TR 16787:2014 Industrial Gas Installation - Guideline CEN/TS 115-4:2014 Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards CEN/TS :2014 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity CEN/TS :2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity Listenummer: 15/2015 Side: 124 av 145

125 91 Bygningsmaterialer og bygging CEN/TS 14807:2013 Rørledningssystemer Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines CEN/TS :2014 Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 C to 850 C CEN/TS 15963:2014 Bitumen og bituminøse bindemidler - Bestemmelse av bruddseighetstemperatur ved trepunkts bøyeprøving på prøve med innsnitt Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 CEN/TS 16516:2013 Byggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air CEN/TS 16628:2014 Energy Performance of Buildings - Basic Principles for the set of EPB standards CEN/TS 16629:2014 Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS :2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test Fastsatte norske standarder NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no Listenummer: 15/2015 Side: 125 av 145

126 91 Bygningsmaterialer og bygging NS 3420-T:2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del T: Maler- og beleggarbeider Specification texts for building, construction and installations - Part T: Painting, papering and flooring Språk: no NS-EN 26:2015 Gassfyrte momentanvannvarmere for sanitære formål Gas-fired instantaneous water heaters for the production of domestic hot water NS-EN 89:2015 Gassfyrte varmtvannsbeholdere for framstilling og lagring av varmtvann i husholdninger Gas-fired storage water heaters for the production of domestic hot water NS-EN :2015 Tilsetningsstoffer for betong, mørtel og injiseringsmasse - Prøvingsmetoder - Del 13: Referansemørtel til murverk for prøving av tilsetningsstoffer Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures NS-EN 772-1:2011+A1:2015 Prøvingsmetoder for murprodukter - Del 1: Bestemmelse av trykkfasthet Methods of test for masonry units - Part 1: Determination of compressive strength NS-EN 933-8:2012+A1:2015 Prøvingsmetoder for geometriske egenskaper for tilslag - Del 8: Bedømmelse av finstoffinnhold - Sandekvivalent-metoden Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test NS-EN 997:2012+A1:2015 Klosettskåler og vannklosetter med innebygd vannlås WC pans and WC suites with integral trap NS-EN 1303:2015 Bygningsbeslag - Låssylindere - Krav og prøvingsmetoder Building hardware - Cylinders for locks - Requirements and test methods NS-EN :2006/NA:2015 Nasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler National Annex NA - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting Språk: no NS-EN :2006+NA:2015 Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting NS-EN :2006+NA:2015 Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting Språk: no Listenummer: 15/2015 Side: 126 av 145

127 91 Bygningsmaterialer og bygging NS-EN :2006/NA:2015 Nasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler National Annex NA - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting NS-EN :2006/A1:2015 Endringsblad A1 - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-4: Konstruksjoner av rustfritt stål Amendment A1 - Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels NS-EN :2015 Ventilasjon i bygninger - Ytelsesprøving av komponenter/produkter for boligventilasjon - Del 11: Enheter for tilluftsventilasjon Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units NS-EN 13162:2012+A1:2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification Språk: no NS-EN 13162:2012+A1:2015 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av mineralull (MW) - Krav Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification NS-EN 13163:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Språk: no NS-EN 13163:2012+A1:2015 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert polystyren (EPS) - Krav Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification NS-EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Språk: no NS-EN 13164:2012+A1:2015 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekstrudert polystyrenskum (XPS) - Krav Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification NS-EN :2015 Gassfyrte apparater for produksjon av varmtvann til husholdningsbruk - Del 2: Vurdering av energiforbruk Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption NS-EN :2015 Prøvingsmetoder for å bestemme bidraget til lastbærende komponenters brannmotstand - Del 9: Påførte brannbeskyttelsessystemer for stålbjelker med åpninger i steget Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings Listenummer: 15/2015 Side: 127 av 145

128 91 Bygningsmaterialer og bygging NS-EN 13561:2015 Utvendige persienner og markiser - Krav til ytelse og sikkerhet External blinds and awnings - Performance requirements including safety NS-EN 13637:2015 Bygningsbeslag - Elektrisk styrte nødutgangssystemer til bruk på rømningsveger - Krav og prøvingsmetoder Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods NS-EN 13659:2015 Skodder og utvendige persienner - Krav til ytelse og sikkerhet Shutters and external venetian blinds - Performance requirements including safety NS-EN 14055:2010+A1:2015 Spylesisterner for WC og urinaler WC and urinal flushing cisterns NS-EN 14428:2015 Dusjavlukker - Funksjonskrav og prøvingsmetoder Shower enclosures - Functional requirements and test methods NS-EN :2012+A1:2015 Gassfyrte varmekjeler - Del 1: Generelle krav og prøvinger Gas-fired heating boilers - Part 1: General requirements and tests NS-EN 16627:2015 Bærekraftige byggverk - Vurdering av bygningers økonomiske prestasjon - Beregningsmetoder Sustainability of construction works - Assessment of economic performance of buildings - Calculation methods NS-EN 16687:2015 Byggevarer - Vurdering av frigjøring av farlige stoffer - Terminologi Construction products - Assessment of release of dangerous substances - Terminology NS-EN ISO :2010/A1:2015 Endringsblad A1 - Akustikk - Laboratoriemåling av lydisolasjon for bygningsdeler - Del 3: Måling av trinnlydisolasjon (ISO :2010/Amd 1:2015) Amendment A1 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation - Amendment 1 (ISO :2010/Amd 1:2015) Tilbaketrukne norske standarder NS 3140:1983 Dører - Egenskaper Doors - Characteristics Språk: no Listenummer: 15/2015 Side: 128 av 145

129 91 Bygningsmaterialer og bygging NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no NS 3420-T:2013 Beskrivelsestekster for bygg, anlegg og installasjoner - Del T: Maler- og beleggarbeider Specification texts for building, construction and installations - Part T: Painting, papering and flooring Språk: no NS 3463:1987 Utsetting og oppmåling på byggeplass - Metoder og toleranser (ISO 4463:1979 modifisert) Setting-out and measurement on a building site - Methods and tolerances (ISO 4463:1979 modified) Språk: no NS-EN 26:1997/A2:2004 Endringsblad A2 - Gassfyrte momentanvannvarmere for sanitære formål med atmosfæriske brennere Amendment A2 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners NS-EN 26:1997/A3:2006 Endringsblad A3 - Gassfyrte gjennomstrømningsvannvarmere med atmosfæriske brennere for produksjon av varmt vann til hjemmebruk Amendment A3 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners NS-EN 26:1997/A1:2000 Endringsblad A1 - Gassfyrte vannvarmere for produksjon av varmt forbruksvann, utstyrt med atmosfærisk brenner Amendment A1 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners NS-EN 26:1977+AC Gassfyrte momentanvannvarmere for sanitære formål med atmosfæriske brennere (innbefattet rettelsesblad AC:1998) Gas-fired instaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum AC:1998) NS-EN 89:1999 Gassfyrte vannvarmere for fremstilling og lagring av varmtvann i husholdninger - (innbefattet endringsblad A1:1999) Gas-fired storage water heaters for the production of domestic hot water - (including Amendment A1:1999) Listenummer: 15/2015 Side: 129 av 145

130 91 Bygningsmaterialer og bygging NS-EN 89:1999/A3:2006 Endringsblad A3 - Gassfyrte vannvarmere for fremstilling og lagring av varmtvann i husholdninger Amendment A3 - Gas-fired storage water heaters for the production of domestic hot water NS-EN 89:1999/A4:2006 Endringsblad A4 - Gassfyrte vannvarmere for fremstilling og lagring av varmtvann i husholdninger Amendment A4 - Gas-fired storage water heaters for the production of domestic hot water NS-EN 89:1999/A2:2000 Endringsblad A2 - Gassfyrte varmtvannsberedere for produksjon av varmtvann i boliger Amendment A2 - Gas fired storage water heaters for the production of domestic hot water NS-EN 124:1994 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Konstruksjonskrav, typeprøving, merking og kvalitetskontroll Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control Språk: no/en NS-EN :2009+A1:2011 Tilsetningsstoffer for betong, mørtel og injiseringsmasse - Prøvingsmetoder - Del 13: Referansemørtel til murverk for prøving av tilsetningsstoffer Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures NS-EN 772-1:2011 Prøvingsmetoder for murprodukter - Del 1: Bestemmelse av trykkfasthet Methods of test for masonry units - Part 1: Determination of compressive strength NS-EN 933-8:2012 Prøvingsmetoder for geometriske egenskaper for tilslag - Del 8: Bedømmelse av finstoffinnhold - Sandekvivalent-metoden Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test NS-EN 997:2012 Klosettskåler og vannklosetter med innebygd vannlås WC pans and WC suites with integral trap NS-EN 997:2012/AC:2012 Rettelsesblad AC - Klosettskåler og vannklosetter med innebygd vannlås Corrigendum AC - WC pans and WC suites with integral trap Listenummer: 15/2015 Side: 130 av 145

131 91 Bygningsmaterialer og bygging NS-EN 1303:2005 Bygningsbeslag - Låssylindere - Krav og prøvingsmetoder Building hardware - Cylinders for locks - Requirements and test methods NS-EN 1303:2005/AC:2008 Rettelsesblad AC - Bygningsbeslag - Låssylindere - Krav og prøvingsmetoder Corrigendum AC - Building hardware - Cylinders for locks - Requirements and test methods NS-EN :2006/NA:2009 Nasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler National Annex NA - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting Språk: no NS-EN :2006+NA:2009 Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting NS-EN :2006/NA:2009 Nasjonalt tillegg NA - Eurokode 3: Prosjektering av stålkonstruksjoner - Del 1-3: Konstruksjoner av kaldformede tynnplateprofiler National Annex NA - Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting NS-EN 13162:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av mineralull (MW) - Krav Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification Språk: no NS-EN 13162:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av mineralull (MW) - Krav Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification NS-EN 13163:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert polystyren (EPS) - Krav Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Språk: no NS-EN 13163:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert polystyren (EPS) - Krav Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Listenummer: 15/2015 Side: 131 av 145

132 91 Bygningsmaterialer og bygging NS-EN 13164:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekstrudert polystyrenskum (XPS) - Krav Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Språk: no NS-EN 13164:2012 Varmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekstrudert polystyrenskum (XPS) - Krav Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification NS-EN :2006 Gassfyrte apparater for produksjon av varmtvann til husholdningsbruk - Apparater med varmetilførsel mindre enn eller lik 70 kw og lagringskapasitet mindre enn eller lik 300 liter - Del 2: Vurdering av energiforbruk Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kw heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption NS-EN 13561:2004+A1:2008 Utvendige persienner - Krav til ytelse og sikkerhet External blinds - Performance requirements including safety NS-EN 13659:2004+A1:2008 Skodder - Krav til ytelse og sikkerhet Shutters - Performance requirements including safety NS-EN 14055:2010 Spylesisterner for WC og urinaler WC and urinal flushing cisterns NS-EN 14428:2004+A1:2008 Dusjavlukker - Funksjonskrav og prøvingsmetoder Shower enclosures - Functional requirements and test methods NS-EN :2012 Gassfyrte varmekjeler - Del 1: Generelle krav og prøvinger Gas-fired heating boilers - Part 1: General requirements and tests 93 Anleggsvirksomhet Standardforslag til høring - europeiske (CEN) pren 752 Drain and sewer systems outside buildings - Sewer system management Kommentarfrist: Listenummer: 15/2015 Side: 132 av 145

133 93 Anleggsvirksomhet pren Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions Kommentarfrist: pren Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens Kommentarfrist: pren Bituminøse masser Prøvingsmetoder- Del 52: Prøvingsforhold for bestemmelse av oksidativ aldring Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidative ageing Kommentarfrist: pren Earthworks - Part 2: Classification of materials Kommentarfrist: pren ISO Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO/DIS :2015) Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Geotechnical investigation and testing -- Geotechnical monitoring by field instrumentation -- Part 2: Measurement of displacements along a line: Extensometers Geotechnical investigation and testing -- Geotechnical monitoring by field instrumentation -- Part 2: Measurement of displacements along a line: Extensometers Kommentarfrist: Rapporter fra CEN (CR) CEN/TR :2014 Road lighting - Part 1: Guidelines on selection of lighting classes CEN/TR 16513:2014 Railway applications - Track - Survey of track geometry quality CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures CEN/TS 12633:2014 Metode for polering av prøvelegemer forut for måling av skli- og gli-motstand Method of polishing specimens prior to the measurement of slip and skid resistance Listenummer: 15/2015 Side: 133 av 145

134 93 Anleggsvirksomhet CEN/TS :2014 Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures CEN/TS 14807:2013 Rørledningssystemer Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines CEN/TS :2014 Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAG CEN/TS :2014 Jernbane - Spor - Støybarrierer og relaterte innretninger som reagerer på luftbåren lydspredning - Test metode for å bestemme akustisk ytelse - Del 5: Indre egenskaper - På stedet verdier av lydrefleksjon under direkte lydfeltsforhold Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions Fastsatte norske standarder NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2015 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no NS-EN 124-1:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 1: Definisjoner, klassifisering, generelle prinsipper for konstruksjon, ytelseskrav og prøvingsmetoder Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods NS-EN 124-2:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 2: Sluktopper og kumtopper laget av støpejern Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron NS-EN 124-3:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 3: Sluktopper og kumtopper laget av stål eller aluminiumslegeringer Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys NS-EN 124-4:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 4: Sluktopper og kumtopper laget av armert betong Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete Listenummer: 15/2015 Side: 134 av 145

135 93 Anleggsvirksomhet NS-EN 124-5:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 5: Sluktopper og kumtopper laget av kompositter Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials NS-EN 124-6:2015 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Del 6: Sluktopper og kumtopper laget av polypropylen (PP), polyetylen (PE) eller polyvinylklorid uten mykner (PVC-U) Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) NS-EN 1344:2013/AC:2015 Rettelsesblad AC - Belegningsstein av tegl - Krav og prøvingsmetoder Corrigendum AC - Clay pavers - Requirements and test methods NS-EN 1536:2010+A1:2015 Utførelse av spesielle geotekniske arbeider - Borede peler Execution of special geotechnical work - Bored piles NS-EN 1538:2010+A1:2015 Utførelse av spesielle geotekniske arbeider - Slissevegger Execution of special geotechnical work - Diaphragm walls NS-EN 12368:2015 Trafikkreguleringsutstyr - Signalhoder Traffic control equipment - Signal heads NS-EN :2015 Bituminøse masser - Prøvingsmetoder - Del 4: Gjenvinning av bitumen med destillasjonskolonne Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column NS-EN 14199:2015 Utførelse av spesielle geotekniske arbeider - Mikropeler Execution of special geotechnical works - Micropiles NS-EN :2015 Innretninger for reduksjon av vegtrafikkstøy - Prosedyrer for vurdering av langtidsytelse - Del 1: Akustiske egenskaper Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics NS-EN :2015 Innretninger for reduksjon av vegtrafikkstøy - Prosedyrer for å vurdere langtidsytelse - Del 2: Ikke-akustiske egenskaper Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics NS-EN ISO :2015 Geotekniske felt- og laboratorieundersøkelser - Geoteknisk overvåking ved feltinstrumentering - Del 1: Generelle regler (ISO :2015) Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO :2015) Listenummer: 15/2015 Side: 135 av 145

136 93 Anleggsvirksomhet Tilbaketrukne norske standarder NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 0: Orientering Specification texts for building, construction and installations - Part 0: Introduction Språk: no NS :2014 Beskrivelsestekster for bygg, anlegg og installasjoner - Del 2: Struktur og stikkordliste Specification texts for building, construction and installations - Part 2: Structure and index Språk: no NS-EN 124:1994 Sluktopper og kumtopper for kjøre- og fotgjengerområder - Konstruksjonskrav, typeprøving, merking og kvalitetskontroll Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control Språk: no/en NS-EN 1536:2010 Utførelse av spesielle geotekniske arbeider - Borede peler Execution of special geotechnical work - Bored piles NS-EN 1538:2010 Utførelse av spesielle geotekniske arbeider - Slissevegger Execution of special geotechnical work - Diaphragm walls NS-EN 12368:2006 Trafikkreguleringsutstyr - Signalhoder Traffic control equipment - Signal heads NS-EN :2005 Bituminøse masser - Prøvingsmetoder for varmblandet asfalt - Del 4: Gjenvinning av bitumen med destillasjonskolonne Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column NS-EN 14199:2005 Utførelse av spesielle geotekniske arbeider - Mikropeler Execution of special geotechnical works - Micropiles NS-EN :2007 Innretninger for reduksjon av vegtrafikkstøy - Prosedyrer for vurdering av langtidsytelser - Del 1: Akustiske egenskaper Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics Listenummer: 15/2015 Side: 136 av 145

137 93 Anleggsvirksomhet NS-EN :2004 Innretninger for reduksjon av vegtrafikkstøy - Prosedyrer for å vurdere langtidsytelse - Del 2: Ikke-akustiske egenskaper Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport Standardforslag til høring - europeiske (CEN) EN 71-1:2014/prA3:2015 Safety of toys - Part 1: Mechanical and physical properties Safety of toys - Part 1: Mechanical and physical properties Kommentarfrist: EN :2011/prA1 Svømmebassengutstyr - Del 1: Generelle sikkerhetskrav og prøvingsmetoder Swimming pool equipment - Part 1: General safety requirements and test methods Kommentarfrist: pren 484 Specification for dedicated liquefied petroleum gas appliances - Independent stoves, including those incorporating a grill for outdoor use Specification for dedicated liquefied petroleum gas appliances - Independent stoves, including those incorporating a grill for outdoor use Kommentarfrist: pren Utemøbler - Sittemøbler og bord til camping, hjemmebruk og allmenn bruk - Del 1: Generelle sikkerhetskrav Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements Kommentarfrist: pren Utemøbler - Stol og bord for camping, privat bruk og allmenn bruk - del 3: Sikkerhet, styrke og holdbarhetskrav for bord Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Safety, strength and durability requirements for tables Kommentarfrist: pren Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 3: Safety, strength and durability requirements for tables Kommentarfrist: pren 958 Fjellklatringsutstyr - Falldempende system for bruk i (permanente) klatrestiger - Sikkerhetskrav og prøvingsmetoder Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods Kommentarfrist: Listenummer: 15/2015 Side: 137 av 145

138 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport pren Vannsklier - Del 1: Generelle sikkerhetskrav og prøvingsmetoder Water slides - Part 1: Safety requirements and test methods Kommentarfrist: pren Vannsklier- Del 2: Veiledning Water slides - Part 2: Instructions Kommentarfrist: pren Lekeplassutstyr og underlag - Del 4: Spesielle tilleggskrav til sikkerhet og prøvingsmetoder for svevebaner Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways Kommentarfrist: pren rev Klatreanlegg - Del 1: Sikkerhetskrav og prøvingsmetoder for ACS med sikkerhetspunkter Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points Kommentarfrist: pren rev Klatreanlegg - Del 2: Sikkerhetskrav og prøvingsmetoder for bouldervegger Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls Kommentarfrist: pren rev Klatreanlegg - Del 3: Sikkerhetskrav og prøvingsmetoder for klatregrep Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds Kommentarfrist: pren Møbler - Fastmonterte stolrader - Krav til sikkerhet, styrke og holdbarhet Furniture - Ranked seating - Requirements for safety, strength and durability Kommentarfrist: pren Møbler - Fastmonterte stolrader - Krav til sikkerhet, styrke og bestandighet Furniture - Ranked seating - Requirements for safety, strength and durability Kommentarfrist: pren rev Bestemmelse av dimensjonsegenskapene til soveposer - Del 3: Kompresjonsvolum og pakkingsgrad Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packing Kommentarfrist: pren Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification Kommentarfrist: Listenummer: 15/2015 Side: 138 av 145

139 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport pren rev Surfaces for sports areas - Determination of angled ball behaviour - Tennis Kommentarfrist: pren rev Idrettsdekker - Innendørs dekker for allsidig bruk - Krav Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification Kommentarfrist: pren rev Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification Kommentarfrist: pren Høye barnestoler - Krav og prøvingsmetoder Children's high chairs - Requirements and test methods Kommentarfrist: pren rev Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces Kommentarfrist: pren rev Møbler - Styrke, holdbarhet og sikkerhet - Krav til bord utenom husholdninger Furniture - Strength, durability and safety - Requirements for non-domestic tables Kommentarfrist: pren Møbler - Styrke, bestandighet og sikkerhet - Krav til bord som ikke er til husholdningsbruk Furniture - Strength, durability and safety - Requirements for non-domestic tables Kommentarfrist: pren Fjellklatringsutstyr - Avalanche airbag-systemer - Sikkerhetskrav og prøvingsmetoder Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods Kommentarfrist: pren Design/construction of Via Ferrata Kommentarfrist: pren Bevaring av kulturminner - Veiledning for forvaltning av vannmettet tre i områder på land av arkeologisk betydning Conservation of cultural heritage - Guidelines for management of waterlogged wood on terrestrial sites of archaeological significance Kommentarfrist: Listenummer: 15/2015 Side: 139 av 145

140 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport pren Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings Kommentarfrist: pren Barnemøbler - Madrasser til barnesenger og krybber - Sikkerhetskrav og prøvingsmetoder Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods Kommentarfrist: pren Conservation of Cultural Heritage - New sites and buildings intended for the storage and use of collections Conservation of Cultural Heritage - New sites and buildings intended for the storage and use of collections Kommentarfrist: pren Sport og fritidsutstyr - Parkour utstyr - Sikkerhetskrav og prøvingsmetoder Sports and recreational equipment - Parkour equipment - Safety requirements and test methods Kommentarfrist: pren Ice-cream freezers - Classification, requirements and test conditions Kommentarfrist: pren Commercial beverage coolers - Classification, requirements and test conditions Kommentarfrist: pren ISO 8936 Fortelt til campingvogner - Krav og prøvingsmetoder (ISO/DIS 8936:2015) Awnings for leisure accommodation vehicles - Requirements and test methods (ISO/DIS 8936:2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 1: General requirements (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO/DIS :2015) Kommentarfrist: pren ISO Protective equipment for use in ice hockey - Part 3: Face Protectors (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 3: Face Protectors (ISO/DIS :2015) Kommentarfrist: Listenummer: 15/2015 Side: 140 av 145

141 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport pren ISO Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS :2015) Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO/DIS :2015) Kommentarfrist: pren ISO Resilient floor coverings - Specification for heterogeneous vinyl flooring to include luxury vinyl tile requirements (ISO/DIS 10582:2015) Kommentarfrist: pren ISO Fastmontert treningsutstyr - Del 4: Styrketreningsbenker, spesifikke tilleggskrav til sikkerhet og prøvingsmetoder (ISO/DIS :2015) Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO/DIS :2015) Kommentarfrist: pren ISO Fastmontert treningsutstyr - Del 5: Pedaldrevet treningsutstyr, spesifikke tilleggskrav til sikkerhet og prøvingsmetoder Stationary training equipment - Part 5: Pedal crank training equipment, additional specific safety requirements and test methods (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 8936 Caravan awnings - Safety requirements [Revision of first edition (ISO 8936:1988)] Caravan awnings - Safety requirements [Revision of first edition (ISO 8936:1988)] Kommentarfrist: ISO/DIS Resilient floor coverings -- Heterogeneous poly(vinyl chloride) floor coverings -- Specification Kommentarfrist: ISO/DIS Resilient floor coverings -- Specification for heterogeneous vinyl flooring to include luxury vinyl tile requirements Resilient floor coverings -- Specification for heterogeneous vinyl flooring to include luxury vinyl tile requirements Kommentarfrist: ISO/DIS Stationary training equipment -- Part 4: Strength training benches, additional specific safety requirements and test methods Kommentarfrist: ISO/DIS Stationary training equipment -- Part 5: Pedal crank training equipment, additional specific safety requirements and test methods Kommentarfrist: Listenummer: 15/2015 Side: 141 av 145

142 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport ISO-standarder ISO 8783:2015 Alpine skis -- Guidelines for conducting slope performance tests Erstatter A00008:20: ISO 9523:2015 Touring ski-boots for adults -- Interface with touring ski-bindings -- Requirements and test methods Erstatter A00008:20: ISO 11087:2015 Alpine ski-bindings -- Retention devices -- Requirements and test methods Erstatter A00008:20: ISO 11110:2015 Winter-sports equipment -- Test devices for the setting of the functional unit ski/boot/binding -- Requirements and tests Erstatter A00008:20: Rapporter fra CEN (CR) CEN/TR :2015 Child use and care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment Child use and care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment CEN/TR :2015 Child use and care articles - General safety guidelines - Part 2: Chemical hazards Child use and care articles - General safety guidelines - Part 2: Chemical hazards CEN/TR :2015 Child use and care articles - General safety guidelines - Mechanical hazards Child use and care articles - General safety guidelines - Mechanical hazards CEN/TR :2015 Child use and care articles - General safety guidelines - Part 4: Thermal hazards Child use and care articles - General safety guidelines - Part 4: Thermal hazards CEN/TR :2015 Child use and care articles - General safety guidelines - Part 5: Product information Child use and care articles - General safety guidelines - Part 5: Product information CEN/TR 15071:2014 Safety of toys - National translations of warnings and instructions for use in EN 71 series CEN/TR 15071:2015 Sikkerhet for leketøy - Nasjonale oversettelser av advarselsmerkinger og bruksanvisninger i NS-EN 71-serien Safety of toys - National translations of warnings and instructions for use in the EN 71 series Listenummer: 15/2015 Side: 142 av 145

143 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport CEN/TR 15371:2014 Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2 and EN 71-8 CEN/TR 16411:2014 Child use and care articles compiled interpretations of CEN/TC 252 standards CEN/TR 16512:2015 Child use and care articles - Guidelines for the safety of children s slings CEN/TR 16598:2014 Innsamling av begrunnelser for EN Krav Collection of rationales for EN Requirements CEN/TR 16792:2014 Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety CEN/TS 16163:2014 Bevaring av kulturminner - Utstillingsbelysning av kulturminne Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitions CEN/TS 16354:2013 Laminate floor coverings - Underlays - Specification, requirements and test methods CEN/TS 16611:2014 Furniture - Assessment of the surface resistance to microscratching CEN/TS 16665:2014 Standing ladder durability test specification CEN/TS 16717:2015 Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athlete Fastsatte norske standarder NS-EN :2015 Husholdningskokeapparater for gassformig brensel - Del 2-1: Rasjonell bruk av energi - Generelt Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General NS-EN 747-1:2012+A1:2015 Møbler - Køyesenger til bruk i boliger - Del 1: Krav til sikkerhet, styrke og holdbarhet Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements Listenummer: 15/2015 Side: 143 av 145

144 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport NS-EN 747-2:2012+A1:2015 Møbler - Køyesenger til bruk i boliger - Del 2: Prøvingsmetoder Furniture - Bunk beds and high beds - Part 2: Test methods NS-EN 1466:2014/AC:2015 Rettelsesblad AC - Spedbarns- og småbarnsprodukter - Bærebager og stativer - Sikkerhetskrav og prøvingsmetoder Corrigendum AC - Child use and care articles - Carry cots and stands - Safety requirements and test methods NS-EN :2015 Sports- og fritidsutstyr - Klatreparker - Del 1: Krav til konstruksjon og sikkerhet Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements NS-EN :2015 Sports- og fritidsutstyr - Klatreparker - Del 2: Krav til drift Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements Tilbaketrukne norske standarder NS-EN :1998/A2:2005 Endringsblad A2 - Husholdningskokeapparater for gassformig brensel - Del 2-1: Rasjonell bruk av energi - Generelt Amendment A2 - Domestic cooking appliances burning gas - Part: 2-1: Rational use of energy - General NS-EN :1998/A1:2003 Endringsblad A1 - Husholdningskokeapparater for gassformig brensel - Del 2-1: Rasjonell bruk av energi - Generelt Amendment A1 - Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General NS-EN :1998 Husholdningskokeapparater for gassformig brensel - Del 2-1: Rasjonell bruk av energi - Generelt Domestic cooking appliances burning gas fuel - Part 2-1: Rational use of energy - General NS-EN 747-1:2012 Møbler - Køyesenger til bruk i boliger - Del 1: Krav til sikkerhet, styrke og holdbarhet Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements NS-EN 747-2:2012 Møbler - Køyesenger til bruk i boliger - Del 2: Prøvingsmetoder Furniture - Bunk beds and high beds - Part 2: Test methods NS-EN :2007 Sport- og fritidsutstyr - Taubaner - Del 1: Sikkerhetskrav og prøvingsmetoder Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements Listenummer: 15/2015 Side: 144 av 145

145 97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport NS-EN :2007 Sport- og fritidsutstyr - Taubaner - Del 2: Funksjonskrav Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements Listenummer: 15/2015 Side: 145 av 145