TECNOTTICA CONSONNI SRL CERTIFIED QUALITY MANAGEMENT SYSTEM COMPANY BY DNV UNI EN ISO 9001:2008
|
|
- Jemimah Carter
- 8 years ago
- Views:
Transcription
1 TECNOTTICA CONSONNI SRL CERTIFIED QUALITY MANAGEMENT SYSTEM COMPANY BY DNV UNI EN ISO 9001:2008 OUR COMPANY Tecnottica Consonni is an optical manufacturing company specialized since 1957 in the manufacture of optical components in glass and plastic materials. Our principal services are the following: Optical Glass and Optical Plastic elements production Prisms, filters, mirrors and reflectors production Traditional low-cost machines for non-imaging optics productions High Precision Processing CNC machines for grinding and polishing optical surfaces suitable for imaging and quality optics productions Injection-molding technology for high quality optical plastics Production of mechanical supports for optical elements and systems Engineering, assembling and testing of optical elements and systems Metrology and Control Department with interferometric set-up UNI EN ISO 9001:2008 Certified Quality Management System by DNV 1
2 WHERE WE ARE Tecnottica is located in Calco (LC), only a few kilometers far from Milan ITALY, and is easily accessible from the most important transport connection of Lombardy Area (motorways, train stations and airports). OUR PRODUCTION Our production involves different sectors and it is among the most various and complex one. We are supplier of several companies that work in the following fields: Imaging and vision systems (for UV-VIS-SWIR) Lighting and LEDs Optoelectronics and optomechanics Laser and photonics Renewable energies (solar and photovoltaic) 2
3 OUR CAPABILITIES: Diameter Range between Ø2,7 mm and Ø310 mm plano optics maximum diagonal 400 mm Dimensional Tolerances Linear: up to +/-0,01 mm Angular: up to +/-10 arcsec This tolerances may vary in function of the shapes and the geometry requested Available Geometry spherical, aspherical and plano surfaces custom shapes upon request Materials Available all optical glasses and Fused Silica from the most important worldwide producers and suitable for UV, VIS, SWIR and IR bands. Our principal suppliers are: Schott, Ohara, CDGM Hoya, Corning, Heraeus...and many others! Other materials available upon request: ZnSe, ZnS, CaF, MgF2, Sapphire, Germanium Plastic Materials (also suitable for injection-molding) PMMA and PC Certified Surface Accuracy Up to λ/20 Complementary Services Rapid prototyping of single optical elements and optical systems Anti-Reflection and High-Reflection coatings Chemical and Physical (thermal) tempering on glass substrates 3
4 OUR PHILOSOPHY Our goal is to have always our customers satisfied at their best. We use to work directly with them, creating specific products according to their needs. No specific products catalogue Customized and high quality optical elements and systems in accordance with customer s indications Fully stocked warehouse from which to choose a list of standard and non customized products successfully commercialized over the last years With decades of experience and constant investments in technical and human resources, today Tecnottica Consonni is able to satisfy the most various requests from different markets. To ensure to the customer a concrete guarantee about the quality of its products, Tecnottica Consonni decided to adopt a quality certification management system able to follow the whole cycles of production. Tecnottica Consonni is a certified UNI EN ISO 9001:2008 company. 4
5 OUR PRODUCTS GLASS LENSES Refractive Optical Elements made of Optical Glasses Spherical Lenses Aspherical Lenses AR coatings for specific wavelengths and bandwidths Composed Refractive Optical Elements made of Optical Glasses Achromat Doublets Achromat Triplets AR coatings for specific wavelengths and bandwidths Finished Optical Systems 5
6 OUR PRODUCTS COMPLETE OPTICAL SYSTEMS Engineering, production, assembly and final certification of complete optical systems Objectives for machine vision and measurement applications suitable for VIS and near IR (fixed focal lengths, zooms, telephotos, wide-angles) Objectives for non-imaging and lighting applications Special lenses for LED sources Custom projects Wide choice of commercial objectives from standard catalogues 6
7 OUR PRODUCTS FRESNEL AND GLASS MOLDED LENSES Diffractive Optical Elements and refractive glass-molded lenses suitable for imaging and nonimaging (lighting, entertainment and Photovoltaics) applications Fresnel Lenses made of Optical Glasses Fresnel Lenses made of Plastic Materials Customized shapes and Focal Lengths Antihalo Lenses made of Optical Glasses Other glass-molded lenses with customized shapes and dimensions Plano surface satinated or polished 7
8 OUR PRODUCTS OPTICAL PLASTICS Refractive Optical Elements made of plastic materials What we offer about optical plastics: CNC machines Injection-molding Technology (ENGEL machine) Assistance, support and production of molds for optical plastic elements Lenses for non-imaging applications LED Lenses Optical Fiber Lenses Condensers Customized Shapes 8
9 OUR PRODUCTS REFLECTORS AND LIGHT GUIDES Reflectors suitable for lighting application Mini-LED Reflectors Dichroic Reflectors Customized Shapes Fully customizable Light Guides made of glass and plastic materials for lighting, LEDs and Optical Fibers applications 9
10 OUR PRODUCTS OTHER GLASS LENSES Other refractive optical elements made of Optical Glasses Cylindrical Lenses made of Optical Glasses Cylindrical Lenses made of Plastic Materials Dome and big meniscus Lenses 10
11 OUR PRODUCTS PLANO OPTICS AND BALL LENSES Disk, plates, windows and ball lenses made of Optical and Semioptical Glasses Customized shapes and thicknesses High precision CNC grinding machines High precision optical finishing with different levels of flatness Anti-Reflection coatings for specific wavelengths and bandwidths Physical and Chemical tempering 11
12 OUR PRODUCTS OPTICAL FILTERS AND OPTICAL MIRRORS Optical Filters - Customized shapes and thicknesses - Immediate availability of all Schott Optical Filters Glass - Other absorption and dichroic Filters - Dichroic Multilayers and customized filters optimized for specific bandwidths and wavelengths Reflective Optical Elements Plane Mirrors Concave and Convex Spherical Mirrors High-Reflection coatings for specific wavelengths and bandwidths Customized shapes 12
13 OUR PRODUCTS PRISMS Dispersive Optical Elements made of glass for imaging and illumination systems Right and Equilateral Prisms Gonio Lenses for Gonioscopy Dove Prisms Pentagonal Prisms Corner Cube Prisms Beam Splitters Parallelepipeds Customized Prisms 13
14 HIGH PRECISION OPTICS Thanks to constant investments in technical and human resources, we are able to guarantee the realization of optical surfaces with the highest standards permitted by the modern technologies. Within our facility we work with: Grinding Machine Schneider SLG50 Grinding Machine Schneider SLG120 Polishing Machine Schneider SLP100 Polishing Machine Optotech SPK100 Grinding Machine LOH Spheromatic 120SL for aspherical surfaces Centering Machine LOH CM-2 SL Centering Machine Optotech ZM200CNC Cementing Station Optotech AZP2-HP With the metrology department directly integrated in the production, we can ensure the machining of optical surfaces with an accuracy up to λ/
15 HIGH PRECISION OPTICS Here you are some examples of our daily activities that involve the use of our machineries and instruments for precision optics. 15
16 METROLOGY DEPARTMENT The metrology department, alongside and complementary to the production department, is designed to enable us to ensure a complete control over the work performed directly within the production cycle. Through this philosophy we are now able to offer to our customers a range of products with the highest qualities while reducing scraps. Our Metrology Department is fitted out with: Interferometer Schneider SLI 101 equipped with hardware Zygo 4 Interferometer Optotech OWI 150 XT equipped with hardware Zygo 6 and software MetroPro Radii Measurement System Trioptics SpheroCompact Focometer Trioptics OptiSpheric Optical Centering Measurement station Optotech AZP2-HP 16
17 METROLOGY DEPARTMENT The previous machines allow us to set up the following measurements, which can be provided accompanied with their relative Certificate of Measurement: Sub-micron Radii measurements Wedge Angles measurements Effective Focal Lengths (EFL) of single elements and complete optical systems Back Focal Lengths (BFL) of single elements and complete optical systems Modulation Transfer Function (MTF) of high resolution imaging optical systems 546 nm) Optical Surfaces Qualitiy analysis in accordance with the ISO10110 standards Optical Centering error measurement on singlets and doublets 17
18 OPTICAL ENGINEERING AND OPTOMECHANICAL PRODUCTION AND ASSEMBLY Out of our optical production, we are proud to offer to our customers a complete optomechanical support that allows us to follow the fascinating world of modern optics in a 360 complete view. Engineering of optical systems for imaging and non-imaging applications Engineering of concentrators and special lenses for LED sources Production of Mechanical supports in plastics, alluminium and many other materials, as well as assembling and testing of optical elements within the same 18
19 Thanks to all Tecnottica Consonni partners and friends! Find us on: 2013 Shows: SPIE PHOTONICS WEST San Francisco CA (USA) The Moscone Center February Booth #2201 DEFENSE, SECURITY+SENSING Baltimore MD (USA) Baltimore Convention Center, 30 April 2 May 2013 Booth #1969 (last update February 2013) 19
Prototyping to Production
White Paper Prototyping to Production Konrad Goffin David Montgomery Cicely Rathmell INTRODUCTION CVI Laser Optics quick turnaround prototype services smooth the transition from prototype to production.
More informationIndustrial Manufacturing
Industrial Manufacturing 1 202 Company Profile Qioptiq designs and manufactures photonic products and solutions, serving a wide range of markets and applications in the medical and life sciences, industrial
More informationEfficiency, Dispersion and Straylight Performance Tests of Immersed Gratings for High Resolution Spectroscopy in the Near Infra-red
Changing the economics of space Efficiency, Dispersion and Straylight Performance Tests of Immersed Gratings for High Resolution Spectroscopy in the Near Infra-red J. Fernandez-Saldivar 1, F. Culfaz 1,
More informationMolded Infrared Optics 03.06.2015
Molded Infrared Optics 03.06.2015 Overview 1. Company 2. Basics precision glass molding 3. Molding of chalcogenide glass 4. Chalcogenide glass comparison with cristalline materials 5. Design recommendations
More informationOptical System Design
Optical System Design Robert E. Fischer CEO, OPTICS 1, Incorporated Biljana Tadic-Galeb Panavision Paul R. Yoder Consultant With contributions by Ranko Galeb Bernard C.Kress, Ph.D. Stephen C. McClain,
More informationdigital quality control fail pass at your fingertips Smart Metrology Solutions.
digital quality control fail pass µphase smartgage The clever innovation in digital metrology by FISBA, which lets you smarten up your quality management and economize your production processes, yet spares
More informationShrinkage Modeling of Injection Molded Precision Optics
Shrinkage Modeling of Injection Molded Precision Optics Jay Udayasankaran*, Nelson E. Claytor, Donald M. Combs, Oscar M. Lechuga, John J. Mader, and Rajesh Mittal Fresnel Technologies, Inc., 101 W. Morningside
More informationAn Introduction to the Design, Manufacture and Application of Plastic Optics
An Introduction to the Design, Manufacture and Application of Plastic Optics Authors: Claude Tribastone, William Peck, Opkor, Inc. A variety of industries are incorporating plastic optics in their optical
More informationNOVEL FOCUSING OPTICS FOR IR LASERS Paper 1504
NOVEL FOCUSING OPTICS FOR IR LASERS Paper 1504 Gary Herrit 1, Alan Hedges 1, Herman Reedy 1 1 II-VI Incorporated, 375 Saxonburg Blvd., Saxonburg, PA, 16056, USA Abstract Traditional focusing optics for
More informationSviluppo di componenti per sottosistemi ottici basati su ottiche elettroformate altamente asferiche per applicazioni Spazio e Difesa
EMSOM Sviluppo di componenti per sottosistemi ottici basati su ottiche elettroformate altamente asferiche per applicazioni Spazio e Difesa Workshop Terzo bando P.M.I. Tema Materiali, Componenti e Sensori
More informationApplication Report: Running µshape TM on a VF-20 Interferometer
: Running µshape TM on a VF-20 Interferometer General This report describes how a fiber interferometer from Arden Photonics Ltd was used together with the µshape TM Generic software package. The VF-20
More information2) A convex lens is known as a diverging lens and a concave lens is known as a converging lens. Answer: FALSE Diff: 1 Var: 1 Page Ref: Sec.
Physics for Scientists and Engineers, 4e (Giancoli) Chapter 33 Lenses and Optical Instruments 33.1 Conceptual Questions 1) State how to draw the three rays for finding the image position due to a thin
More informationOptical laser beam scanner lens relay system
1. Introduction Optical laser beam scanner lens relay system Laser beam scanning is used most often by far in confocal microscopes. There are many ways by which a laser beam can be scanned across the back
More informationHigh-End Optical Solutions Swiss Made Swiss Quality Swiss Precision
High-End Optical Solutions Swiss Made Swiss Quality Swiss Precision Sales@PembrokeInstruments.com http://pembrokeinstruments.com Tel. 650-616-4202 Editorial Swiss, but at home all over the world At WZW
More informationCompact and Modular Interferometers
µphase & µshape TM Compact and Modular Interferometers OVERVIEW Contents Page µphase Interferometers 3 Interferometry 4 Fizeau Setup................................................................. 4 Twyman-Green
More informationLASER TO FIBER SOURCE COUPLERS APPLICATION NOTES
LASER TO FIBER SOURCE COUPLERS APPLICATION NOTES Laser To Fiber Coupler With Adjustable Focus Laser To Fiber Coupler With A Beam Splitter Laser To Fiber Coupler With A Shutter Application Notes OZ Optics
More informationApplications. Blue IF 039, Green IF 062, Yellow IF 022, Orange IF 041, Red IF 090,Dark Red IF 091 IR pass IF 092, IF098, IF 093 Surface 1 5/2 0.
Color Filters Blue, Green, Yellow, Orange, Red & NIR Color Filters Blue and Green filters, transmitts wavelength in a corresponding color as seen by the human eye, while yellow, orange and red are long
More informationMaster Degree Program
SAINT PETERSBURG STATE ELECTROTECHNICAL UNIVERSITY LETI Laser Measurement and Navigation Systems department Master Degree Program ETU LETI TRADITIONS AND INNOVATIONS ETU LETI is the oldest Electrotechnical
More informationRealization of a UV fisheye hyperspectral camera
Realization of a UV fisheye hyperspectral camera Valentina Caricato, Andrea Egidi, Marco Pisani and Massimo Zucco, INRIM Outline Purpose of the instrument Required specs Hyperspectral technique Optical
More informationLens refractive index measurement based on fiber point-diffraction longitudinal interferometry
Lens refractive index measurement based on fiber point-diffraction longitudinal interferometry Lingfeng Chen, * Xiaofei Guo, and Jinjian Hao School of Optoelectronics, Beijing Institute of Technology,
More informationFlexible Measurements of Shapes and Roughness of Aspheres and Optical Freeforms
Session 2: Digital Imaging for Industry 4.0 and Robots Flexible Measurements of Shapes and Roughness of Aspheres and Optical Freeforms 26. März 2014 Mahr in Facts Business Fields: System metrology Hand-held
More informationPolarization Tutorial... 240. Polarizing Beamsplitter Cubes... 243
IntroPolarizers Polarization Tutorial............ 240 Windows η Polarizing Beamsplitter Cubes.... 243 ξ Ψ High Energy Laser Polarizers...... 247 Polarization Rotators........... 253 Depolarizers.................
More information3.5.4.2 One example: Michelson interferometer
3.5.4.2 One example: Michelson interferometer mirror 1 mirror 2 light source 1 2 3 beam splitter 4 object (n object ) interference pattern we either observe fringes of same thickness (parallel light) or
More informationMeasuring Miniature Lens Radius of Curvature and Refractive Index with White Light Optical Profiler
Measuring Miniature Lens Radius of Curvature and Refractive Index with White Light Optical Profiler Introduction For miniature lenses with size of few millimeters or sub-millimeter, it is difficult to
More informationSimplifying Opto- Mechanical Product Development: How a new product reduces cost, stress, and time to market
Simplifying Opto- Mechanical Product Development: How a new product reduces cost, stress, and time to market Innovation in optical design is exploding. From cell phone cameras to space telescopes, driverless
More informationSilicon, the test mass substrate of tomorrow? Jerome Degallaix The Next Detectors for Gravitational Wave Astronomy Beijing - 2015
Silicon, the test mass substrate of tomorrow? Jerome Degallaix The Next Detectors for Gravitational Wave Astronomy Beijing - 2015 Program of the talk... What we have now What we know about silicon What
More informationCustom Optical Solutions A NAVITAR COMPANY
Custom Optical Solutions A NAVITAR COMPANY ABOUT US Custom Lens Design and Precision Lens Manufacturing Special Optics is dedicated to rapidly designing, prototyping, and manufacturing innovative and high
More informationSpecifying Plasma Deposited Hard Coated Optical Thin Film Filters. Alluxa Engineering Staff
Specifying Plasma Deposited Hard Coated Optical Thin Film Filters. Alluxa Engineering Staff December 2012 Specifying Advanced Plasma Deposited Hard Coated Optical Bandpass and Dichroic Filters. Introduction
More informationVOLUME BRAGG GRATINGS TM A NEW PLATFORM TECHNOLOGY FOR WDM APPLICATIONS. Boris L. Volodin, Sergei V. Dolgy, Elena D. Melnik and Vladimir S.
VOLUME BRAGG GRATINGS TM A NEW PLATFORM TECHNOLOGY FOR WDM APPLICATIONS Boris L. Volodin, Sergei V. Dolgy, Elena D. Melnik and Vladimir S. Ban, PD-LD Inc. Pennington, NJ 08534 Introduction The development
More informationWarning : HαT telescope must NOT be used for solar observation without additional filters. This is the user responsibility to check that his filter
For high resolution chromosphere observation and imaging in Hα band Warning : HαT telescope must NOT be used for solar observation without additional filters. This is the user responsibility to check that
More informationFigure 1 Wafer with Notch
Glass Wafer 2 SCHOTT is an international technology group with more than 125 years of experience in the areas of specialty glasses, materials and advanced technologies. With our high-quality products and
More informationLaboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014
Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014 Introduction Following our previous lab exercises, you now have the skills and understanding to control
More informationOptical Communications
Optical Communications Telecommunication Engineering School of Engineering University of Rome La Sapienza Rome, Italy 2005-2006 Lecture #2, May 2 2006 The Optical Communication System BLOCK DIAGRAM OF
More informationHolographically corrected microscope with a large working distance (as appears in Applied Optics, Vol. 37, No. 10, 1849-1853, 1 April 1998)
Holographically corrected microscope with a large working distance (as appears in Applied Optics, Vol. 37, No. 10, 1849-1853, 1 April 1998) Geoff Andersen and R. J. Knize Laser and Optics Research Center
More informationRAY TRACING UNIFIED FIELD TRACING
RAY TRACING Start to investigate the performance of your optical system using 3D ray distributions, dot diagrams of ray positions and directions, and optical path length. GEOMETRIC FIELD TRACING Switch
More informationOptical Design using Fresnel Lenses
Optical Design using Fresnel Lenses Basic principles and some practical examples Arthur Davis and Frank Kühnlenz Reflexite Optical Solutions Business Abstract The fresnel lens can be used in a wide variety
More informationEXPERIMENT O-6. Michelson Interferometer. Abstract. References. Pre-Lab
EXPERIMENT O-6 Michelson Interferometer Abstract A Michelson interferometer, constructed by the student, is used to measure the wavelength of He-Ne laser light and the index of refraction of a flat transparent
More informationFlat-Field IR Mega-Pixel Lens
Flat-Field Mega-Pixel Lens Series Flat-Field Mega-Pixel Lens Flat-Field Mega-Pixel Lens 20.ver.02 E Specifications and Lineup Full MP Image Model Imager Size Mount Focal Length Aperture Range Zoom Ratio
More informationA NEW LOOK AT RISLEY PRISMS. By Craig Schwarze Senior Systems Engineer OPTRA Inc.
As seen in Photonics Spectra June 2006: A NEW LOOK AT RISLEY PRISMS By Craig Schwarze Senior Systems Engineer OPTRA Inc. Introduction With laser beams finding more and more applications that require aiming
More information5.3 Cell Phone Camera
164 Chapter 5 5.3 Cell Phone Camera The next design example we discuss is a cell phone camera. These systems have become quite popular, to the point that it is often more difficult to purchase a cell phone
More informationDTIC. 7lt 0t(6 o0 o 0 AD-A25 3 466. $i Quarterly Progress Report. Grantee
AD-A25 3 466 $i Quarterly Progress Report for Design and Packaging of Fault Tolerant Optoelectronic Multiprocessor Computing Systems Sponsored by Defense Advanced Research Projects Agency Monitored by
More informationStandard Precision Aspheres SPA. CATALOG 2016 Europe
Standard Precision Aspheres SPA CATALOG 2016 Europe SPA Beam Expander Kit Page 05 Dear asphericon customer asphericon SPA Product Range SPA HighNA Page 09 Within the Standard Precision Aspheres (asphericon
More informationMEASUREMENT OF END FACE GEOMETRY ON FIBER OPTIC TERMINI...2
MEASUREMENT OF END FACE GEOMETRY ON FIBER OPTIC TERMINI...2 IMPORTANCE OF END FACE GEOMETRY...2 FIBER OPTIC CONNECTOR END FACE GEOMETRY MEASUREMENT TECHNIQUES...2 INTERFEROMETRIC MICROSCOPE TYPES...3 MEASUREMENT
More informationSoft lithography for diffractive microfabrications
Soft lithography for diffractive microfabrications Liliana D Amico PhD Section: Materials Engineering XXVIII Cycle (3 Year) Mauro Casalboni, Fabio De Matteis, Paolo Prosposito, Roberta De Angelis Summary
More informationMICROFOCUSING OF THE FERMI@ELETTRA FEL BEAM WITH A K-B ACTIVE OPTICS SYSTEM: SPOT SIZE PREDICTIONS. Lorenzo Raimondi
MICROFOCUSING OF THE FERMI@ELETTRA FEL BEAM WITH A K-B ACTIVE OPTICS SYSTEM: SPOT SIZE PREDICTIONS Lorenzo Raimondi PADReS Group Sincrotrone Trieste SCpA 1 FERMI@Elettra seeded FEL FEL 1 FEL 2 FEL 1 from
More informationModern Classical Optics
Modern Classical Optics GEOFFREY BROOKER Department of Physics University of Oxford OXPORD UNIVERSITY PRESS Contents 1 Electromagnetism and basic optics 1 1.1 Introduction 1 1.2 The Maxwell equations 1
More informationRevision problem. Chapter 18 problem 37 page 612. Suppose you point a pinhole camera at a 15m tall tree that is 75m away.
Revision problem Chapter 18 problem 37 page 612 Suppose you point a pinhole camera at a 15m tall tree that is 75m away. 1 Optical Instruments Thin lens equation Refractive power Cameras The human eye Combining
More informationEcoGlass, a.s. Company Profile. More than Glass!
EcoGlass, a.s. Company Profile More than Glass! Company Strategy EcoGlass is a 100% Czech owned company based on the best quality and tradition of Czech glassmakers. Financially stable company with good
More informationThe CVD diamond booklet
available at: www.diamond-materials.com/download Content 1. General properties of diamond... 2 2. Optical Properties... 4 Optical transparency...4 Absorption coefficient at 10.6 µm...5 Refractive index:
More informationAP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light
AP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light Name: Period: Date: MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Reflection,
More informationApplication-Specific Optical Design
White Paper Application-Specific Optical Design May 2012 Author David Hasenauer CODE V Product Manager, Optical Solutions Group, Synopsys, Inc. Introduction Optical design software capabilities have advanced
More informationTesting and Performance of the Convex Lens Concentrating Solar Power Panel Prototype
Testing and Performance of the Convex Lens Concentrating Solar Power Panel Prototype Ankit S. Gujrathi 1, Prof. Dilip Gehlot 2 1 M.tech (2 nd Year), 2 Assistant Professor, Department of Mechanical Engg.,
More informationC) D) As object AB is moved from its present position toward the left, the size of the image produced A) decreases B) increases C) remains the same
1. For a plane mirror, compared to the object distance, the image distance is always A) less B) greater C) the same 2. Which graph best represents the relationship between image distance (di) and object
More information1051-232 Imaging Systems Laboratory II. Laboratory 4: Basic Lens Design in OSLO April 2 & 4, 2002
05-232 Imaging Systems Laboratory II Laboratory 4: Basic Lens Design in OSLO April 2 & 4, 2002 Abstract: For designing the optics of an imaging system, one of the main types of tools used today is optical
More informationAutomated part positioning with the laser tracker
Automated part positioning with the laser tracker S. Kyle, R. Loser, D. Warren Leica Abstract Improvements and new developments for Leica's laser tracker make it suitable for measuring the relative position
More informationFirst let us consider microscopes. Human eyes are sensitive to radiation having wavelengths between
Optical Differences Between Telescopes and Microscopes Robert R. Pavlis, Girard, Kansas USA icroscopes and telescopes are optical instruments that are designed to permit observation of objects and details
More informationLaser expander design of highly efficient Blu-ray disc pickup head
Laser expander design of highly efficient Blu-ray disc pickup head Wen-Shing Sun, 1,* Kun-Di Liu, 1 Jui-Wen Pan, 1 Chuen-Lin Tien, 2 and Min-Sheng Hsieh 1 1 Department of Optics and Photonics, National
More informationENGINEERING METROLOGY
ENGINEERING METROLOGY ACADEMIC YEAR 92-93, SEMESTER ONE COORDINATE MEASURING MACHINES OPTICAL MEASUREMENT SYSTEMS; DEPARTMENT OF MECHANICAL ENGINEERING ISFAHAN UNIVERSITY OF TECHNOLOGY Coordinate Measuring
More informationChapter 4 COATINGS Full Reflective Coatings:
Chapter 4 COATINGS Technical developments in coatings for plastic optics have resulted in optical and durability characteristics once believed possible only with glass. These advances in coating technology
More informationImaging techniques with refractive beam shaping optics
Imaging techniques with refractive beam shaping optics Alexander Laskin, Vadim Laskin AdlOptica GmbH, Rudower Chaussee 29, 12489 Berlin, Germany ABSTRACT Applying of the refractive beam shapers in real
More informationSensori ottici e laser nelle applicazioni industriali
Sensori ottici e laser nelle applicazioni industriali Guido GIULIANI Pavia giuliani@julight.it 1 Outline Optical sensors in industry: why? Types of optical sensors optical barriers distance measurement
More informationCoating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
More informationThe Wide Field Cassegrain: Exploring Solution Space
The Wide Field Cassegrain: Exploring Solution Space Peter Ceravolo Ceravolo Optical Systems www.ceravolo.com peter@ceravolo.com Abstract This article illustrates the use of an internal aperture stop in
More informationColor holographic 3D display unit with aperture field division
Color holographic 3D display unit with aperture field division Weronika Zaperty, Tomasz Kozacki, Malgorzata Kujawinska, Grzegorz Finke Photonics Engineering Division, Faculty of Mechatronics Warsaw University
More informationPhotonic Hydrophones based on Coated Fiber Bragg Gratings
Photonic Hydrophones based on Coated Fiber Bragg Gratings M. Pisco, M. Moccia, M. Consales, V. Galdi, A. Cutolo, A. Cusano Optoelectronics Division, Engineering Department, University of Sannio, Benevento,
More informationCHEMALUX 100OD SYSTEM. CHEMAT VISION - partner in vision care
CHEMALUX 100OD SYSTEM CHEMAT VISION - partner in vision care CHEMALUX 100OD SYSTEM Polish-to-Coat Lens Making System for Small Practices Chemalux 100OD Lab System is the smallest surfacing & finishing
More informationTEC APO140. This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy.
140 manuals 2013_110 manuals 1/13/2013 10:40 PM Page 1 TEC APO140 This telescope is closer to optical perfection more than any instrument I have ever used before. R.Renzi, Italy. OWNER S MANUAL 2013 140
More informationInstallation Manuals Version n. 01 of 14/06/2013
Technical Manuals Installation Manuals Version n. 01 of 14/06/2013 pag. 2 Index Index... 2 Introduction and general hints... 3 Curving Profile... 3 DESCRIPTION... 3 MATERIAL... 3 CERTIFICATE... 3 SIZES...
More informationAutomatisierte, hochpräzise Optikmontage Lösungen für die Industrie
Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie Alexander Steinecker, CSEM Trends in Micro Nano, HSLU, Horw, 5. Dezember 2013 High power laser sources Motivation Laser manufacturing
More informationInjection Molded Polymer Optics In The 21st-Century
Injection Molded Polymer Optics In The 21st-Century William S. Beich, Director of New Business Development, G-S PLASTIC OPTICS. 1. Introduction Precision polymer optics, manufactured by injection molding
More informationReliance. Precision Limited. Electro-Mechanical, Opto-Mechanical Assemblies and Specialist Geared Components
Reliance R G Precision Limited Electro-Mechanical, Opto-Mechanical Assemblies and Specialist Geared Components 2 Reliance Precision Limited, Huddersfield Company Introduction A specialist engineering company
More informationOptical thickness measurement of substrates using a transmitted wavefront test at two wavelengths to average out multiple reflection errors
Copyright 2002 Society of Photo-Optical Instrumentation Engineers. This paper was published in Proceedings of SPIE and is made available as an electronic reprint with permission of SPIE. One print or electronic
More informationWe realise your visions- take us at our word! Präsentation Firma 1 A Autenrieth GmbH & Co. KG
We realise your visions- take us at our word! That s us That s how we work Customer demand advice conzeption, prototyping service logistics tooling production Our history 1977 Foundation of business named
More informationThe pole Optique-Rhône. Rhône-Alpes: a booster of innovation in Optics&Photonics
The pole Optique-Rhône Rhône-Alpes: a booster of innovation in Optics&Photonics The scientific and industrial forces of Rhône-Alpes region 1 000 20 000 5 400 8 000 1 000 1 000 2 500 1 500 500 2 500 1 500
More informationManufacture of 8.4 m off-axis segments: a 1/5 scale demonstration
Manufacture of 8.4 m off-axis segments: a 1/5 scale demonstration H. M. Martin a, J. H. Burge a,b, B. Cuerden a, S. M. Miller a, B. Smith a, C. Zhao b a Steward Observatory, University of Arizona, Tucson,
More informationCorning HPFS 7979, 7980, 8655 Fused Silica. Optical Materials Product Information Specialty Materials Division
Corning HPFS 7979, 7980, 8655 Fused Silica Optical Materials Product Information Specialty Materials Division HPFS 7979, 7980 and 8655 Fused Silica HPFS Fused Silica glasses are known throughout the industry
More informationNear-field scanning optical microscopy (SNOM)
Adviser: dr. Maja Remškar Institut Jožef Stefan January 2010 1 2 3 4 5 6 Fluorescence Raman and surface enhanced Raman 7 Conventional optical microscopy-limited resolution Two broad classes of techniques
More informationApplication Example: Quality Control of Injection-Molded Parts
Application Example: Quality Control of Injection-Molded Parts Measuring Systems: ATOS Keywords: Optical 3D measuring technology, mold try-out, first article inspection, form and dimension inspection of
More informationPrecision Optics. Spheroline SLG 301. Perfect grinding of larger optics
Precision Optics Spheroline SLG 301 Perfect grinding of larger optics Introducing the Spheroline SLG 301 Larger diameters optics made to very high specs the processing center Spheroline SLG 301 meets this
More informationOptical Engineering and Instrument Design Certificate Programs
Optical Engineering and Instrument Design Certificate Programs University of California Irvine University Extension UNIVERSITY OF CALIFORNIA, IRVINE UNIVERSITY EXTENSION CERTIFICATE PROGRAMS IN Optical
More informationMaking A Mirror Grinding Tool By Allen Malsburry
Making A Mirror Grinding Tool By Allen Malsburry The average person would never think, I can make my own telescope. Most amateur astronomers believe, I can buy a better telescope than I can build. Neither
More informationSpectroscopic Ellipsometry:
Spectroscopic : What it is, what it will do, and what it won t do by Harland G. Tompkins Introduction Fundamentals Anatomy of an ellipsometric spectrum Analysis of an ellipsometric spectrum What you can
More informationAgilent Cary 4000/5000/6000i Series UV-Vis-NIR
Agilent Cary 4000/5000/6000i Series UV-Vis-NIR Guaranteed specifications Design overview Double beam, ratio recording, double out-of-plane Littrow monochromator UV-Vis-NIR spectrophotometer (Agilent Cary
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationScanning Near Field Optical Microscopy: Principle, Instrumentation and Applications
Scanning Near Field Optical Microscopy: Principle, Instrumentation and Applications Saulius Marcinkevičius Optics, ICT, KTH 1 Outline Optical near field. Principle of scanning near field optical microscope
More informationOptical Manufacturing Solutions.
Optical Manufacturing Solutions. Satisloh - the company Combining two respected optical manufacturing companies Satis Vacuum and LOH Optical Machinery Satisloh provides you with over 120 years of invaluable
More informationLight management for photovoltaics using surface nanostructures
Light management for photovoltaics using surface nanostructures Roberta De Angelis Department of Industrial Engineering and INSTM, University of Rome Tor Vergata New Materials For Optoelectronics webnemo.uniroma2.it
More informationPhase Bulb Refurbation and Optmic Thin Film
A simple system for measuring small phase retardation of an optical thin film T.N. Hansen* a, H. Fabricius a a DELTA Light & Optics, Venlighedsvej 4, 970-Hørsholm, Denmark ABSTRACT This paper describes
More informationZero Width Glass Cutting with CO 2 Laser
Zero Width Glass Cutting with CO 2 Laser Mohammed Naeem GSI Group, Laser Division Cosford Lane, Swift Valley Rugby mnaeem@gsig.com Introduction Laser cutting of glass in not a novel technique, excellent
More informationEconomic Mass Producible Mirror Panels for Solar Concentrators
Abstract G, G. Burgess, K. Lovegrove and A. Luzzi Centre for Sustainable Energy Systems Australian National University, Canberra 2 Australia E-mail: Glen@faceng.anu.edu.au The Centre for Sustainable Energy
More informationID Objective Requirements Description of Test Date & Examiner 15 Verify that the optics?? OMC
NAOMI OMC/NCU Acceptance Tests at the University of Durham ATC Document number AOW/GEN/RAH/15.0/06/00 OMC/NCU acceptance tests DRAFT (Version date: 2 nd June 2000) wht-naomi-44 The ID numbers are those
More informationAutomotive Applications of 3D Laser Scanning Introduction
Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc
More informationHigh-Concentration Submicron Particle Size Distribution by Dynamic Light Scattering
High-Concentration Submicron Particle Size Distribution by Dynamic Light Scattering Power spectrum development with heterodyne technology advances biotechnology and nanotechnology measurements. M. N. Trainer
More informationRapid Prototyping Technologies. May, 2016
Rapid Prototyping Technologies May, 2016 WE HAVE ALL THE NECESSARY TOOLS TO ENSURE THE FINAL SUCCESS OF YOUR PROTOTYPE. Andaltec can help you in all the steps, from the design to fully finished prototype
More informationLOCATION DEPENDENCY OF POSITIONING ERROR IN A 3-AXES CNC MILLING MACHINE
th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 214) December 12 th 14 th, 214, IIT Guwahati, Assam, India LOCATION DEPENDENCY OF POSITIONING ERROR IN
More informationHow To Design A 3D Print In Metal
DMLS / SLM Metal 3D Printing. An introductory design guide for our 3d printing in metal service. v2.2-8th July 2015 Pricing considerations. Part Volume. One of the biggest factors in the price for DMLS
More informationLBS-300 Beam Sampler for C-mount Cameras. YAG Focal Spot Analysis Adapter. User Notes
LBS-300 Beam Sampler for C-mount Cameras P/N SP90183, SP90184, SP90185 and SP90186 YAG Focal Spot Analysis Adapter P/N SP90187, SP90188, SP90189, SP90190, SP90191 User Notes Ophir-Spiricon Inc. 60 West
More informationMachined Specular Surfaces
Machine-Integrated Measurement of Ultra-Precision Machined Specular Surfaces G. Häusler, Ch. Faber, E. Olesch, Ch. Röttinger Institute of Optics, Information, and Photonics (IOIP) University of Erlangen-Nuremberg,
More informationORIEL. FT-IR Spectroscopy SECTION FOUR FEATURES. Glossary of Terms Introduction to FT-IR Spectroscopy
ORIEL ORIEL PRODUCT TRAINING FT-IR Spectroscopy SECTION FOUR FEATURES Glossary of Terms Introduction to FT-IR Spectroscopy Stratford, CT Toll Free 800.74.5393 Fax 03.378.457 www.newport.com/oriel oriel.sales@newport.com
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More information