CURRICULUM VITAE. April 26 th 1977 in Sidi Bouzid - Tunisia

Transcription

1 Name: Date and place of birth: Nationality: CURRICULUM VITAE Kamel Guedri April 26 th 1977 in Sidi Bouzid - Tunisia Tunisian Marital status: Married (children: 3) Position: Assistant Professor Department: Mechanical Engineering Institute: College of Engineering and Islamic Architecture Address: Umm Al-Qura University, College of Engineering & Islamic Architecture, Mechanical Engineering Dep., Room H [email protected] Mobile: Website: Major personnel skills Peer Reviewer in international journals (Energy, Numerical Heat transfer, Heat Mass Transfer, Heat Transfer Engineering, Thermal Sciences ) and congress (CMME 2010 and 2011) Chairman of the Scientific Committee of the Professional Master "Engineering and Management of Energy" at the Faculty of Sciences of Gafsa Elected Member of the Scientific Committee of the University of Gafsa ( ) Member of the University of Gafsa Committee working on a project with the aim to develop a new Strategic Plan for this university (December Present) Responsible of a research group in the research laboratory "materials, energy and renewable energies" with researches about energy, fluid mechanics, thermodynamics, heat and mass transfer, combustion, pollution, environment, power plants, energy conversion, renewable energies, thermal engineering Diplomas 2008 : Ph. D. in Energetic Engineering (related to Thermal and Mechanical Engineering) Institute: The National College of Engineering of Monastir (ENIM) Title: «Radiative heat transfer modeling in flames using a modified Finite Volume Method» 2002 : Master in Energetic Engineering (related to Thermal and Mechanical Engineering) Institute: The National College of Engineering of Monastir (ENIM) Title: «Application of the technique blocked-off-region and the Finite Volume Method to combined conductive and radiative heat transfer in three dimensional L-shaped» 2001 : Diploma of Energetic Engineer Specialty: Energetic Engineering (Energy and Environment) Institute: National College of Engineering of Monastir (ENIM) Title: «Determination of temperature and concentrations profiles in a diffusion flame» 1996 : Baccalaureate in Technology 1/9

2 Taught Courses Teaching Experiences (2002-Present) 2012-Present: Assistant Professor (Mechanical Engineering) Institute: College of Engineering & Islamic Architecture, Umm Al-Qura Univ. B.Sc. of Mechanical Engineering : - Course and lab-works of "Heat Transfer 1" ; "Heat Transfer 2" ; "Power Plants" ; "Fluid Mechanics 1" - B.Sc. projects about renewable energy (solar still, solar dryer, ) Master of Mechanical Engineering : - Master project about fire dynamics simulator (FDS) 2009-Present: Assistant Professor (Mechanical/Thermal Engineering) Institute: Faculty of Sciences of Gafsa In masters (Post-graduate level): - Research master «Industrial Chemistry and Environment» : Course and lab-works of "Environment"and "Thermal Engineering Measurements". - Professional master «Engineering and Management of Energy» : Course and lab-works of "Energy", "Thermodynamics", "Heat and mass transfer", "fluid mechanics", "Numerical methods", "Thermal Engineering Measurements" and "Applied Heat Transfer". In licenses (Graduate level): Course and class-works of Thermodynamics, Fluid mechanics, Fluid flow, Heat and Mass transfer, Combustion, Numerical methods, Astrophysics, Solid mechanics and General physics : Lecturer (Mechanical/Thermal Engineering) Institute: Faculty of Sciences of Gafsa Teaching in licenses: Course and class-works of Thermodynamics, Numerical methods, Fluids Mechanics, Heat transfer, Combustion, Refrigeration and Air- Conditioning and Radiative heat transfer : Contractual Lecturer Institute: Faculty of Sciences of Gafsa Teaching: Course, class-works and lab-works of C++ object-oriented, C programming, Pascal programming, Fortran programming, Matlab and Maple programming, algorithmic, refrigeration and air-conditioning, numerical method. 2/9

3 PhD thesis, MSc thesis & BSc Projects Supervised Currently 4 PhDs are being prepared under my supervision (2009-present): 02 PhD in Thermal Engineering at the National College of Engineering of Monastir (ENIM); 02 PhD in Industrial Engineering at the National College of Engineering of Tunis (ENIT). 05 Research Master "Industrial Chemistry and Environment". More than 20 Professional Master "Engineering and Management of Energy" (14 students have discussed their theses and other will discuses their thesis in June 2012) More than 10 BSc Projects in Applied Physics (Thermal Engineering) Other informations Book published: Course and corrected exercises of fluid mechanics (for students at 1 st and 2 nd levels of the first university cycle: license and preparatory cycle). Course and corrected exercises of heat transfer (for students at 1 st and 2 nd levels of the first university cycle: license and preparatory cycle). Course and corrected exercises of thermodynamics (In press). Laboratory book published: Thermal Engineering: Thermodynamics, heat transfer, fluid mechanics. Programming: Programming with C, C++, Fortran, Matlab and Maple External Examiner of more than 30 MSc theses and 20 BSc Projects Training E-Learning training: Institute: Umm Al-Qura University. Periods: March Topic: E-Learning. PhD training: Institute: Complexe de Recherche Interprofessionnel en Aérothermochimie (CORIA), Université de Rouen, France. Periods: June July 2004 and May- June Topic: Finite Volume Method, Monte Carlo Method, three-dimensional, radiative heat transfer, combustion, turbulence, numerical methods... Person in charge of training: Professor Claude Rozé Engineering training: Company: Phosphate Company of Gafsa (CPG) (Period: July 2000) Company: COALA, Sidi Bouzid (Period: June - July 1999) 3/9

4 COMPUTER and Languages Computer Offices software s: Windows, Microsoft Office (Word, Excel, PowerPoint), Internet Programming: Fortran, C, C++, Pascal, Maple, Matlab, Visual Basic Software: Fire Dynamics Simulator, Engineering Equation Solver (EES), Cycle- Tempo, Cycle-Pad, Wasp, Fluid-Prop, Microcal Origin, Surfer, Grapher Languages English: Fluent written and spoken (research language) French: Fluent written and spoken (education language) Arabic: Fluent written and spoken (mother language) Research activities Peer Reviewer in International Journals Reviewer in international journals: - «Energy» (Elsevier, ISSN: ; Impact factor (IF) in 2011: 3.56). - «Numerical Heat Transfer» (Taylor and Francis; ISSN: , IF= 1.119). - «Heat Transfer Engineering» (Taylor and Francis; ISSN: , IF= 0.792). - «Heat Mass Transfer» (Elsevier; ISSN: ; IF= 0.873). - «Journal of the Taiwan Institute of Chemical Engineers» - «Thermal Sciences» Scientific Committees Member of the Scientific Committee in the «1st and 2nd Moroccan Conference on Materials and Energy in Gafsa (2010 and 2011)». Member of the Scientific Committee of the University of Gafsa ( ). President of the Committee of the Professional Master "Engineering and Management of Energy". International Cooperation France: Complexe de Recherche Interprofessionnel en Aérothermochimie (CORIA), Université de Rouen, France. France: Laboratoire Gestion des Risques et Environnement (LGRE), Université de Mulhouse, France. 4/9

5 Book GUEDRI Kamel, Modélisation des transferts radiatifs dans les flammes, Editions universitaires européennes. (ISBN: ), (Language : French), published 17 June Peer Reviewed International Publications [1] Bouzid Abdessatar, Nahhas Ahmed Mohammud, and GUEDRI Kamel. InGaAs/InP avalanche photodiode for infrared single photon detection using a time-to-voltage converter. Optics Communications (Impact factor 1.542); 328:37 40, [2] Abbassi Mohamed Ammar, GUEDRI Kamel, Borjini Mohamed Naceur, Halouani Kamel, and Zeghmati Belkacem. Modeling of Radiative Heat Transfer in 2D Complex Heat Recuperator of Biomass Pyrolysis Furnace: A Study of Baffles Shadow and Soot Volume Fraction Effects. International Journal of Physical, Nuclear Science and Engineering; 8(2), [3] Mliki Bouchmel, Abbassi Mohamed Ammar, GUEDRI Kamel, Chrigui Mouldi, and Omri Ahmed. Large Eddy Simulation of Compartment Fire with Gas Combustible. International Journal of Mechanical, Industrial Science and Engineering; 8(2), [4] GUEDRI Kamel, Borjini Mohamed Naceur, Jeguirum Mejdi, Brilhac Jean-François and Saîd Rachid. Numerical study of radiative heat transfer effects on a complex configuration of rack storage fire. Energy (Impact factor = 3.56); 36 (5): , [5] Méchi Rachid, Farhat Habib, GUEDRI Kamel, Halouani Kamel and SAÏD Rachid. Extension of the zonal method to inhomogeneous non-grey semi-transparent medium. Energy (Impact factor = 3.56); 35: 1-15, [6] Gassoumi Taoufik, GUEDRI Kamel and SAÏD Rachid. Numerical Study of the Swirl Effect on a Coaxial Jet Combustor Flame Including Radiative Heat Transfer. Numerical Heat Transfer (Part A) (Impact factor = 1.65); 56: , [7] GUEDRI Kamel, ABBASSI Mohamed Ammar, BORJINI Mohamed Naceur, HALOUANI Kamel and SAÏD Rachid. Application of the Finite Volume Method to study the effects of 5/9

6 baffles on radiative heat transfer in complex enclosures. Numerical Heat Transfer (Part A) (Impact factor = 1.65); 55: , [8] BORJINI Mohamed Naceur, GUEDRI Kamel and SAÏD Rachid. Modeling of radiative heat transfer in 3D complex boiler with non-gray sooting media. Journal of Quantitative Spectroscopy & Radiative Transfer (Impact factor = 1.6); 105: , [9] GUEDRI Kamel, BORJINI Mohamed Naceur, MECHI Rachid and SAID Rachid. Formulation and testing of the FTn finite volume method for radiation in 3-D complex inhomogeneous participating media, Journal of Quantitative Spectroscopy & Radiative Transfer (Impact factor = 1.6); 98: , [10] GUEDRI Kamel, BORJINI Mohamed Naceur and FARHAT Habib. Modelization of combined radiative and conductive heat transfer in three-dimensional complex enclosures. International Journal for Numerical Methods in Heat & Fluid Flow (Impact factor = 1.1); 15 (3): , Selected Conferences Publications [11] GUEDRI Kamel, AL-Ghamdi Abdulmajeed Saeed, and Ghulman Hamza Ahmed. Analysis of transient radiative heat transfer using high bounded schemes of the FTn Finite Volume Method. 10 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Florida, USA, July [12] Abbassi Mohamed Ammar, GUEDRI Kamel, Ghulman Hamza Ahmed, and AL-Ghamdi Abdulmajeed Saeed. Numeric and experimental studies of a biomass pyrolysis pilot plant with the depollution of pyrolysis products. 10 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Florida, USA, July [13] ABBASSI Mohamed Ammar, MLIKI Bouchmel, GUEDRI Kamel, and HALOUANI Kamel. Fire Dynamic Simulator (FDS) modelling and experimental results of a biomass pyrolysis pilot plant with the depollution of pyrolysis products. International Conference on Composite Materials & Renewable Energy Applications ICCMREA, Sousse, Tunisia, January /9

7 [14] MLIKI Bouchmel, ABBASSI Mohamed Ammar, GUEDRI Kamel, and Omri Ahmed. Large Eddy Simulation of compartment fire with gas combustible. International Conference on Composite Materials & Renewable Energy Applications ICCMREA, Sousse, Tunisia, January [15] MABROUKII Jemhaa, ABBASSI Mohamed Ammar, GUEDRI Kamel, and Omri Ahmed. Energy and economic study of the production of ethanol from cheese whey. International Conference on Composite Materials & Renewable Energy Applications ICCMREA, Sousse, Tunisia, January [16] MABROUKII Jemhaa, ABBASSI Mohamed Ammar, GUEDRI Kamel, and Omri Ahmed. Etude d un procédé de valorisation énergétique de la biomasse pour la production des biofuels. 1 ère Journées de la recherche Scientifique à l Université de Gafsa, 14 mars [17] WANNASSI Afef, GUEDRI Kamel, ABBASSI Mohamed Ammar and OMRI Ahmed. Etude numerique de la pyrolyse d un morceau de bois dans un pilote de traitement thermique de type macro-thermobalance. 7th International Congress on Renewable Energy and the Environment, Sousse, Tunisia, March [18] MBROUKI Jemhaa, ABBASSI Mohamed Ammar, GUEDRI Kamel and OMRI Ahmed. Etude énergétique et économique de la production de l éthanol à partir des rejets agro-industriels. 7th International Congress on Renewable Energy and the Environment, Sousse, Tunisia, March [19] ABBASSI Mohamed Ammar, BOUCHMEL Mliki, GUEDRI Kamel, HALOUANI Kamel. Numerical and experimental modelling of biomass pyrolysis with the depollution of pyrolysis products. 2ème Conférence Maghrébine sur les Matériaux et l énergie, Tozeur, Tunisie, Décembre [20] MABROUKI Jemhaa, ABBASSI Mohamed Ammar, GUEDRI Kamel, OMRI Ahmed. Optimisation de la production de l éthanol à partir de maïs. 2ème Conférence Maghrébine sur les Matériaux et l énergie, Tozeur, Tunisie, Décembre /9

8 [21] BOUCHMEL Mliki, GUEDRI Kamel. L estimation du degré de précision du code FDS à reproduire les observations expérimentales. 2ème Conférence Maghrébine sur les Matériaux et l énergie, Tozeur, Tunisie, Décembre [22] GUEDRI Kamel, ABBASSI Mohamed Ammar, BORJINI Mohamed Naceur, HALOUANI Kamel, OMRI Ahmed and SAÏD Rachid. Evaluation of the FTn Finite Volume Method for predictions of baffles effect s on radiative heat transfer in multidimensional enclosures. 1ère Conférence Maghrébine sur les Matériaux et l énergie CMMEG2010, Gafsa, Tunisie, mai [23] WANNASSI Afef, GUEDRI Kamel and OMRI Ahmed. Etude de l effet du rayonnement thermique sur une flamme de diffusion à faible nombre de Froude. 1ère Conférence Maghrébine sur les Matériaux et l énergie CMMEG2010, Gafsa, Tunisie, mai [24] MABROUKI Jemhaa, GUEDRI Kamel and OMRI Ahmed. Etude numérique de l effet des transferts radiatifs dans une pile à combustible à oxyde solide (SOFC) de type planaire. 1ère Conférence Maghrébine sur les Matériaux et l énergie CMMEG2010, Gafsa, Tunisie, mai [25] ABBASSI Mohamed Ammar, GUEDRI Kamel, BORJINI Mohamed Naceur, HALOUANI Kamel and Zeghmati Belkacem. Modeling of radiative heat transfer in 2D complex furnace of biomass pyrolysis fumes: A study of shadow effect. Procedings of the ASME 2009 Heat Transfer, summer conference HTE 2009, San Francisco, California, USA, July 19-23, [26] GUEDRI Kamel, HIDOURI Ammar. Effets des paramètres de fonctionnement sur la consommation du carburant et sur la production des polluants pour une chaudière industrielle. 1 er Colloque International sur la Maîtrise de l Energie et les Applications des Energies Renouvelables, Tozeur, Tunisie, mai [27] ABBASSI Mohamed Ammar, GUEDRI Kamel, BORJINI Mohamed Naceur, HALOUANI Kamel and Zeghmati Belkacem. Numerical study of radiative heat transfer in a baffled 2D complex heat recuperator. 14èmes Journées Internationales de Thermique, Djerba, Tunisie, Mars, /9

9 [28] GUEDRI Kamel, BORJINI Mohamed Naceur and SAID Rachid. Numerical study for radiative heat transfer in 3D complex combustion chamber with non gray sooting media. 5èmes Journées Tunisiennes sur les Ecoulements et les Transferts (JTET), Monastir Tunisie, mars [29] GUEDRI Kamel, BORJINI Mohamed Naceur and FARHAT Habib. Combined conductionradiation heat transfer in three-dimensional L-shaped enclosure. Proceedings of Eurotherm73 on Computational Thermal Radiation in Participating Media, pp , Mons, Belgium, April [30] GUEDRI Kamel, BORJINI Mohamed Naceur et M-S RADHOUANI. Application de la technique blocked-off-region et de la méthode des volumes finis pour la modélisation du couplage conduction rayonnement dans une enceinte tridimensionnelle ayant la forme L. 4èmes Journées Tunisiennes sur les Ecoulements et les Transferts (JTET), pp , vol. 2, Hammamet Tunisie, Décembre Ph D. & Master Thesis [31] GUEDRI Kamel. Radiative heat transfer modeling in flames using a modified Finite Volume Method. Ph D. Thesis on Energetic Engineering of National College of Engineering of Monastir (ENIM), University of Monastir, March [32] GUEDRI Kamel. Application of the technique blocked-off-region and the Finite Volume Method to combined conductive and radiative heat transfer in three dimensional L-shaped. Energetic Engineering Master Thesis of National College of Engineering of Monastir (ENIM), University of Monastir, July Community Service Member of the Tunisian Community Society for Education, Scientific Research and Development (ATERSD) Hobbies & Sports - Reading Science - Football, Handball, Tennis 9/9