EDITION 1/2014 MEDICAL CATALOGUE

Transcription

1 EDITION 1/2014 MEDICAL CATALOGUE

2 GCE worldwide Sales office Sales representation Headquarters Production units Stock point the GCE Business GCE has almost 100 years of experience in the manufacture and supply of high pressure gas equipment. During this time the GCE product range has increased dramatically. Today s product portfolio fits a large variety of applications, from simple pressure regulators and blowpipes for cutting and welding to highly sophisticated gas supply systems for the medical, electronic and analytical industries. GCE Group includes four business areas: Cutting & Welding Process Application Medical High Purity Origins Sales office Sales representation Headquarters Production units Stock point The origins of GCE (Gas Control Equipment) go back to the start of the 20 th century when Gas Welding was first invented. The GCE group was formed as an independent company in 1987 through the merging of two of the worlds leading gas and welding companies into one independent unit. GCE has grown rapidly since its establishment and is leading the restructuring of the European gas equipment industry through mergers and acquisitions. Through its extensive Research and Development programs GCE has set standards that have become the benchmark for the whole industry. GCE services The main industrial customers for GCE are wholesalers and local distributors. However in some markets GCE distributes equipment with the full cooperation of the main gas supplier for that market. For these companies GCE provides both commercial and technical support. A significant part of the sales volume in this area also comes from key end user accounts such as shipyards, repair shops, OEM customers and welding machine manufacturers. A COMPLETE RANGE FOR MEDICAL The supply of Medical Gas Equipment is a very important part of our business. All Medical Gas Applications require the highest safety standards, specialised knowledge and a full understanding of patient respiratory requirements. GCE fully complies with the European Medical Directive 93/42/EEG and the QSR (Quality System Regulations known as the GMP standards). Western Europe is the traditional market for a whole range of products for all different types of customers and together with the growing Eastern European market, these are GCE s main sales area. Our sales force is also active in a number of other markets including North and South America, North Africa and the Middle East, and continues to expand to other parts of the world, such as China and India. As a result, our products are designed in accordance with the requirements of all European standards as well as those of other regions where they will be used. Supplies to the major Gas Companies account for the majority of sales however in each market various distributors, healthcare providers, hospitals and other manufacturers of medical also play a significant role in the distribution of GCE-branded and CE-marked products. GCE supply complete systems for supplying oxygen, nitrous oxide, other gases and vacuum to hospitals, ambulance service providers, emergency services and home care providers, as well as other special services using this equipment.

3 COMBI VALves 3 Combilite High pressure regulators 7 MediSelect II MediReg II MMR hospital ward equipment 17 MediMeter Mediflow Ultra II Accessories - MediWet II Humidifier Vacuum Regulator - Medievac Accessories for Medievac Suction Ejector - Medieject MediCollect + Accessories Low Pressure Hoses Low Pressure Hoses - MediConnect Trolleys Cylinder Holders HomeCare 55 ECOlite Accessories for Gas Saver Oxygen concentrator - NUVO LITE MARK Oxygen concentrator - NUVO INOGEN ONE G INOGEN ONE G emergency equipment 65 Demand Valves - EASE II Bag Valve Masks Masks Ambulance Gas Panel II Ambulance Regulators - MediReg II with Electronic Signal Gauge Ambulance Regulators - Varimed with Electronic Signal Gauge Gauge with Electrical Output Signal (same for MediReg II and Varimed) GSS Multistar Hospital Central Gas supply system 81 MM40 HP Unit Semiauto MM90 Automatic Gas Manifold MM90 Semiautomatic Gas Manifold MM90 STANDBY Backup Medical Gas Manifold Gas Manifold MC Gas Manifold MC Collection Pipe Line High Pressure Hoses Line Regulator MM40 Stabilizer Stabilizer for Medical Oxygen, N 2 O and Air - MM Stabilizer for Medical Oxygen, N 2 O and Air - MC Simplex MMR Gas Manifold Medical Shut-off Valves Non Return Valve Emergency Shut-Off Valve Box DN Emergency Shut-Off Valve Box DN Pressure Watch with Gauge, Alarm and Quick Coupling DN Pressure Watch with Gauge, Alarm and Quick Coupling DN Pressure Monitor DN Alarm C44 System MC Digital Pressure Monitor Gas Alarm G MediUnit - DIN type Gas Outlet MC70 (Terminal Unit) Safety Valve Medical Pipeline Systems Pressure Transmitter Connecting Pipes for Cylinder Manifolds Cylinder Retaining Brackets Connection Pipes for Cylinder Pack Manifolds Extension Pipes Connecting Components for Cylinder Manifolds Non-return Valves for Connection Pipes High Pressure Filter SIMPLEX - DUPLEX High Pressure valves DUPLEX High Pressure valves General business terms and conditions 115 Contents

4 Contacts GCE Romania GCE romania Established in March 2002, GCE Romania is the GCE AB sales office on the Romanian market. Currently, the company is responsible for sales in Moldova and Turkey. The company team of four employees, is a professional, dynamic, flexible and prompt one. Along with well-known quality products and services, it enhances the GCE position among the top companies in the Romanian industry. Bucureşti contacts Contact GCE Romania SRL Str. Alexandru Puşkin nr. 22 Ap. 1, Cod , Sector 1 Bucureşti Tel Fax

5 COMBI VALVES

6 CYLINDER VALVE WITH INTEGRATED PRESSURE REGULATOR FOR USE WITH MEDICAL GASES medivital Made for life 15 years life time 15 year life time ensured by extended endurance and cycle testing for future market requirements Slow opening shut off valve with new Patented design Latest technology highest shock resistant gauge Flow selector designed for optimal gas flow and patient safety Guard design provides maximum protection for the valve User friendly Suitable for use in Homecare, Emergency and Hospital applications Easy read Flow Selector and Gauge Shut off valve with clear open /closed status colour coded marking Ergonomic guard design allows easy handling of the cylinder package by all users Compact and lightweight design less than 1150 gr Easy clean guard material User friendly HIGhest SAFety Testing in accordance with the following standards, ISO ASTM G175 Pill test ISO CE marked CE 0434 in accordance with the Medical directive 93/42/EC and TPED 2010/35 EU Phthalate and Halogenated polymer free components MRI compatible up to Tesla 3 For use with Oxygen, Nitrous Oxide and other Medical mixed gases up to 300 bar working pressure 4

7 features and accessories Standard features Optional features Flow control unit Teflon taped cylinder connection Flow outlet ports (fir tree or threaded) Electronic memory chip for easy Pressure outlet (quick coupler) traceability and cylinder control Active cylinder pressure indicator Filling port with non-return valve Shut-off valve External pressure relief valve Residual pressure valve Excess flow device for small cylinder connections Dust tube for big cylinder connections Protective valve guard ACCessories Filling adaptor Bed hanger Humidifier holder Customized electronic gauge option benefits FOR END USERS PRESSURE INDICATOR Good visibility of values/status Wide dial angle improving readability 40 mm diameter Fluorescent scale face Bed Hanger Humidifier Holder SHUT OFF VALVE Clear visibility of open/close status colour indication Good visibility of open/close direction Space for RF chip inside the hand wheel easy use FLOW SELECTOR Excellent view of all selected flows Large clear 4,5 mm digits Optimized ergonomics of hand wheel Increased flow in between settings (min 50% of lower value) Fixed arrow for flow indication on the front of the valve Increased clearance around hose nipple, enables easy connnection/disconnection of cannula/mask Facility for RF chip inside the flow control knob PRESSURE OUTLET Completely enclosed & protected by the guard Open/close push system with wide plastic grips for easy operation, for all main types Improved design for primary types benefits FOR distributors FILLING PORT Complete enclosure of the filling port Cover connected to the guard Opening of cover only with a tool Universal sealing for various designs of filling port NEW MARKING (LASER) On the valve rear Easily visible through the guard guard Protects the complete valve (hose nipple, QC, SOV) Integrated filling port cover Easy cleaning Ergonomic designed handle Valving capability without guard removal Fits to all types of cylinders up to max.package weight of 30 kg 5

8 technical data Gas: Inlet pressure: Outlet pressure: RPV closing: PRV opening and re-closing: Flow ranges: Materials: Elastomers: Plastics: Springs (gas wetted): Dimensions: Weight:* Inlet stem: Filling port: Regulatory status: Classification: Manufacturer: O 2, AIR, N 2 O/O 2 and other medical mixed gases Up to 300 bar (4500 psi) 3,6 to 5,5 bar - acc. to EN ISO (or per customer specification) >3 bar >5.5 bar 0-2, 0-6, 0-15 and 0-25 l/min Metallic parts (gas wetted): brass EPDM, silicon, PUR PA66, PEEK, PI CuBe2, CuSn6 Height: 153 mm; Width: 112 mm; Depth: 118 mm 1150 g Tapered or parallel threads (17E, 25E, M18, per customer specification) ISO 5145, NEVOC or per customer specification Complies with MDD 93/42/EEC Complies with TPED 99/36/EEC Complies with EN ISO Complies with ISO Complies with EN 1789 Complies with ASTM G175 Production in accordance with EN ISO 9001 and EN ISO IIb GCE s.r.o, Žižkova 381, Chotěboř * Standard Combivalve (flow control unit 0-15 l/min, flow outlet, DIN quick coupling pressure outlet) with guard. All technical data are given for information only and are subject to modifications by the manufacturer. 6

9 HIGH PRESSURE REGULATORS

10 High Pressure Regulator MEDISELECT II The new generation of medical high pressure gas regulators Regulator with flow selector Rotating pressure gauge which allows convenient reading 360 swivelling outlet it enables better orientation of the nasal cannula or oxygen mask towards the patient (preventing from twisting) Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied with medical gas Lateral and frontal reading of flow settings Higher number of flow disc holes increases treatment options Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation The additional 7 l/min is intended for nebulization Rotating pressure gauge which allows convenient reading Continuous flow between settings, in the unlikely event of mechanism failure swivelling outlet alows wider use of positioning Two windows - frontal and lateral allow very good visibility of set values 8

11 MEDISELECT II variants Below are examples of models. Please use the table below for you to find the appropriate regulator. MediSelect II O2D - KL short connecting inlet stem left for use in suitcases, backpacks and bags 0-25 l/min slim, space-saving gauge MediSelect II O2D - KL MediSelect II O2D - KL short connecting bolts right for use in suitcases, backpacks and bags 0-25 l/min slim, space-saving gauge cylinder connections right, left attached flow selector MediSelect II O2D - DQCKL as MEDISELECT DQCKR but with cylinder connection left and right flow selector Art. Nr. Type Gas Flow range Inlet Outlet QC Inlet pressure Design* (l/min) connection connection (bar) MEDISELECT II O G3/4 9/ D MEDISELECT II O G3/4 9/16 DIN 200 D MEDISELECT II O G3/4 9/ D MEDISELECT II O G3/4 9/16 DIN 200 D MEDISELECT II O G3/4 9/ D MEDISELECT II O G3/4 9/ D MEDISELECT II O PIN INDEX 9/ D MEDISELECT II O PIN INDEX 9/ D MEDISELECT II CO W21,8 14 9/16-60 D MEDISELECT II CO PIN INDEX 9/16-60 D MEDISELECT II AIR 0-25 PIN INDEX 9/16 DIN 200 D2 * pictures are showing ONLY orientation of the inlet connection (left or right) Right - D1 Left - D2 9

12 MEDISELECT - technical data Flow curve for oxygen (P2 = 4 bar) Outlet pressure p2 [bar] Oxygen Flow Q [l/min] technical DATA Gas: O 2, Air, N 2 O, CO 2, N 2 O/O 2 Inlet pressure range: Up to 300 bar Nominal outlet pressure: 4 bar Flow ranges*: 0 to 2 l/min 0;0,1;0,2;0,3;0,4;0,5;0,6;0,7;0,8;1;1,5;2 0 to 6 l/min 0;0,25;0,5;0,75;1;1,5;2;2,5;3;4;5;6 0 to 25 l/min 0;1;2;3;4;5;6;7;9;12;15;25 Inlet connection: According to national standards Outlet connection: 9/16" UNF with hose nipple Body material: Nickel-plated brass Control knob: Polyamide O-rings: EPDM Filter: Sintered bronze Gauge cover: TPE (thermoplastic elastomer) Regulatory status: Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO (Pressure regulators for use with medical gases) Complies with EN 1789 (Medical vehicles and their equipment - Road ambulances) Classification: Class IIb Manufacturer: GCE, s.r.o, Žižkova Chotebor, CZ * Flowrates expressed at 23 C and 101,3 kpa 10

13 High Pressure Regulator MEDIREG II The new generation of medical high pressure gas regulators Regulator with flow selector Regulator with pressure outlet, constantly adjusted flow or with flowmeter Rotating pressure gauge which allows convenient reading Ergonomic and streamlined design Easy cleaning surface Compact and user friendly 360 Rotating pressure gauge which allows convenient reading Low weight Ergonomic Space saving gauge Compact 11

14 MEDIREG II variants MediReg 16 O2D - M with flowmeter tube, 0-16 l/min adjustable MediReg 4 O2D fixed set pressure regulator, 4 l/min outlet 3/8 with hose nipple MediReg 100 O2D - DQC fixed set pressure regulator outlet DIN quick coupler MEDIREG II Art. Nr. Type Gas Flowmeter Inlet Outlet QC Inlet pressure Design* connection connection (bar) MEDIREG II O 2 YES G3/4 9/ D MEDIREG II O 2 - G3/4 DIN 200 D MEDIREG II O 2 - PIN INDEX DIN 200 D MEDIREG II O 2 - G3/4 G3/8 200 D MEDIREG II O 2 - G3/4 DIN 200 D MEDIREG II, el. gauge 4-20mA O 2 - G3/4 DIN 200 D MEDIREG II, el. gauge 4-20mA O 2 - PIN INDEX DIN 200 D MEDIREG II N 2 O - G3/8 DIN 60 D MEDIREG II N 2 O - PIN INDEX DIN 60 D MEDIREG II CO 2 - PIN INDEX DIN 60 D MEDIREG II AIR YES G5/8 9/ D MEDIREG II AIR - G5/8 DIN 200 D MEDIREG II AIR - PIN INDEX DIN 200 D MEDIREG II, el. gauge 4-20mA AIR - G5/8 DN 200 D3 * pictures are showing ONLY orientation of the inlet connection (left or right) Left - D3 Right - D4 Right - D5 12

15 MEDIREG II - technical data Flow curve for oxygen (P2 = 4 bar) Outlet pressure p2 [bar] Oxygen Flow Q [l/min] technical DATA Gas: O 2, Air, N 2 O, CO 2, N 2 O/O 2 Inlet pressure range: Up to 300 bar Nominal outlet pressure: 4 bar Inlet connection: According to national standards Outlet connection: M12 1,25, G3/8, G1/4 with hose nipple Body material: Nickel-plated brass Control knob: Polyamide O-rings: EPDM Filter: Sintered bronze Gauge cover: TPE (thermoplastic elastomer) Regulatory status: Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO (Pressure regulators for use with medical gases) Complies with EN 1789 (Medical vehicles and their equipment - Road ambulances) Classification: Class IIb Manufacturer: GCE, s.r.o, Žižkova Chotebor, CZ 13

16 High Pressure Regulator MMR MMR is a dual stage cylinder valve with automatic compensation for the gradual fall of pressure occuring in a gas cylinder when the gas is used An optimal field of application for the MMR is for the reserve gas cylinder that will be used, via the Pressure Monitor and Pressure watch, if an interruption in the gas supply occurs MMR has a very high flow capacity and gives the stable and even pressure necessary for certain medical gas applications The regulator is available for air and oxygen and has a preset working pressure A safety valve protects the equipment from overpressure 14

17 MMR - Dual Stage Regulator for Medical Use Art. Nr. Description Inlet Outlet connection connection MMR for breathing oxygen, P2= 4,5 bar W /14 G 3/ MMR for breathing air, P2=5 bar G 5/8 G 3/ MMR for I-air, P2=8 bar G 5/8 G 3/8 Technical data Weight: Capacity: ca 2400 gr ca 30 m 3 /h at P1 = 200 bar ( kpa) and at P2 = 5 bar (500kPa) Outlet: according to standard SS Spare parts Art. Nr. Description Gas Washer inlet stem O 2 /AIR 10 pcs Hoses Art. Nr. Gas Length (m) Inlet connection Outlet QC SS O G 3/8-6 mm Straight male N 2 O 1.3 G 3/8 LH - 6 mm Straight male AIR 1.3 G 3/8-8 mm Straight male I-AIR 1.3 G 3/8-8 mm Straight male A / 0 bar bar / Note! Measurements in mm. 15

18 16

19 HOSPITAL WARD EQUIPMENT

20 Flow-metering device medimeter Medimeter is a flowmeter intended for control and measurement of flow of air or oxygen administered to patients Flat surface float allows easy and safe reading of flow values by the users Ergonomic design, easy for cleaning Available with probe connector, rail mounting with a hose and twin versions Soft closing mechanism Resistant float against impact New scale - better reading of flow values 18

21 MEDImeter easy to purified surface area Flow adjustment easy to read, see sketch (for example 11 l/min) ergonomic design Medimeter P O 2 DIN 15 Flowmeter with measuring tube, 0-16 l/min Inlet quick coupler DIN Outlet 9/16 with hose nipple Medimeter R DIN 1,5 15 O 2 Flowmeter with measuring tube, 0-16 l/min with rail clamp and hose 1.5 m Inlet hose down Medimeter P DIN 15 O 2 Duo Double flowmeter with measuring tube, 0-16 l/min Inlet quick coupler DIN Adapter M female thread on 9/16" male thread 19

22 Distributor DUOLINE P O 2 Y, 2 DINQC Distributor with inlet DIN connector, Outlet 2 DIN QC Duoline R O 2, 2 DINQC Distributor with inlet DIN connector to 1.5 m hose, outlet 2 DIN QC, with rail clamp Duoline P Air Y, 2 DINQC Y-connector with inlet DIN connector, Outlet 2 DIN QC Duoline R O 2, 2 NFQC Distributor with NF inlet connector to 1.5 m hose, outlet 2 NFQC with rail clamp and hose 20

23 medimeter Art. Nr. Description DIN Medimeter P (flowmeter with measuring tube) with plug MEDIMETER P DIN, 15 O MEDIMETER P DIN, 15 AIR MEDIMETER P DIN, 15 O 2 Duo Y MEDIMETER P DIN, 15 AIR Duo Y DIN Medimeter R with a neutral color hose 1,5 m black MEDIMETER R DIN1,5; 15 O 2 bl MEDIMETER R DIN1,5; 15 AIR bl MEDIMETER R DIN1,5; 15 O 2 Duo Y bl MEDIMETER R DIN1,5; 15 AIR Duo Y bl DIN Medimeter R with color-coded hose 1,5 m MEDIMETER R DIN1,5; 15 O 2 wh MEDIMETER R DIN1,5; 15 AIR bl/wh MEDIMETER R DIN1,5 15 O 2 Duo wh MEDIMETER R DIN1,5; 15 AIR Duo Y bl/wh NF (Afnor) Medimeter P (flowmeter with measuring tube) MEDIMETER P NF, 15 O MEDIMETER P NF, 15 AIR MEDIMETER P NF, 15 O 2 Duo MEDIMETER P NF, 15 AIR Duo NF (Afnor) Medimeter R with a neutral color hose 1,5 m black MEDIMETER R NF1,5; 15 O MEDIMETER R NF1,5; 15 AIR MEDIMETER R NF1,5; 15 O 2 Duo MEDIMETER R NF1,5; 15 AIR Duo Distributors (DIN and AFNOR) Art. Nr. Description Distribution "P" with plug DUOLINE P O 2 Y, 2 DINQC DUOLINE P AIR Y, 2 DINQC Distributor "R" with a neutral color hose 1,5 m black DUOLINE R 1,5 Y O 2, 2 DINQC bl DUOLINE R 1,5 Y AIR, 2 DINQC, bl MULTISTAR O 2, 4 DINQC Distributor "R" with color-coded hose 1,5 m DUOLINE R 1,5 Y O 2, 2 DINQC wh DUOLINE R 1,5 Y AIR, 2 DINQC, bl/wh K K DUOLINE P O 2 Y, 2 NFQC DUOLINE P AIR Y, 2 NFQC Legend: MEDIMETER R NF1, 5 15 O 2 Duo = eg: MEDIMETER (name), R (rail / rail version), P (sample/connector version), DIN/NF (standard), 1,5 (1,5 m hose length), 15 (Flow in l/min), O 2 (gas), Duo (two outlets). D8 D9 D11 D12 21

24 g TECHNICAL DATA - mediflow ultra ans medimeter medimeter Inlet pressure: 4,5 bar +/-10% Flow ranges: Inlet connections: Outlet connections: Body material: Storage: Operation: Control knob: O-rings: Filter: Regulatory status: SPARE PARTS Art. Nr. Description 0 to 16 l/min continuously country-and gas-type connector all DIN versions 9/16 "UNF with hose nipple, all NF (AFNOR) versions M12 1, 25 with hose nipple Nickel-plated brass -20 to 60 C -30 to 60 C Polyamid EPDM Fabric filter V2A External tube (10 pcs) O-ring (20 pcs) Hose nipple 9/16 UNF with o-ring (10 pcs) Complies with medical devices directive 93/42/EE Complies with EN (Flow - metering devices for connection to terminal units of medical gas pipeline systems) g g - T= rails / rail terminals Art. Nr. Description m standard rail DIN with 3 wall mount per meter Specify meter length when ordering DIN rail terminal with drawer units universal DIN rail terminal block with clamp for V2A Suction bottles Nordic rail clamp with clamp lock Nordic rail clamp with ball Equipment rack profile with screws for mounting on walls or equipment Hook for respiratory masks to rail clamp, U-shaped Suction hooks on rail clamp, straight Catheter tube holder for universal rail clamp g ,5 m- 460 g

25 Flow-metering device MEDIFLOW ULTRA II MediFlow Ultra II is the new generation of medical flow selector DEVICE with built-in regulator It covers a comprehensive combination of inlet and outlet connections and offers various options for all medical applications, from neonatal care through to resuscitation. Built-in regulator provides a very stable and precise flow, independent of the pressure in the medical central gas system or cylinder. Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas. Lateral and frontal reading of flow settings. 360 swivelling outlet it enables better orientation of the nasal cannula or oxygen mask towards the patient (preventing from twisting). Higher number of flow disc holes increases treatment options. Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation. The additional 7 l/min is intended for nebulization. Ergonomic and streamlined design. Independence of the pressure fluctuation with inlet pressure range of 2,8 8 bar Continuous flow between settings, in the unlikely event of mechanism failure 360 Two windows - frontal and lateral allow very good visibility of set values 360 swivelling outlet alows wider use of positioning 23

26 MEDIFLOW ULTRA and MEDIMETER MEDIFLOW ULTRA und MEDIMETER als Versionen für DIN-Schiene 360 Flow outlet rotates 360 Precise flow discharge through integrated pressure regulator Inlet pressure fluctuations from 2.8 to 8 bar be compensated Flows from the front display and the side read Mobile emergency care for five patients Innovative, self-centering handwheel for quick and precise flow adjustment More security through a also constant flow "between the different flow levels" Wall supply unit with flow regulator Mediflow Ultra R, NF, O 2 with rail clamp and hose 1.5 m = AFNOR NF connector Hose outlet from the bottom of the rail terminal Outlet to all threads, other than DIN variants M12 1, 25 Supply column with O 2 and vacuum regulator MEDIMETER and MEDIFLOW ULTRA 24

27 MEDIFLOW ULTRA Mediflow Ultra P DIN O 2 for O 2, Flow 0-2 l/min for neonatal use, 0-6 l/min and 0-25 l/min available with DIN connector for direct insertion into the socket as Air 25 version Mediflow Ultra R O 2 O 2 for O 2, Flow 0-2 l/min for neonatal use, 0-6 l/min and 0-25 l/min available with rail clamp and hose 1.5 m hose outlet from the bottom of the rail terminal Mediflow Ultra R Duo O 2 duo version with 2 flow controllers with rail clamp and hose 1.5 m Mediflow Ultra P DIN Duo O 2 with DIN connector for direct insertion into the socket Multistar O 2, 4 MFU 4-way flow regulator 0-25 l/min supply via a separate hose to DIN couple mounting plate can by straps (not included) to a gas bottle or a device to be attached 25

28 mediflow ultra DIN FLOWMETER P WITH quick COUPLEr Art. Nr. Description Gas Flow range MEDIFLOW ULTRA II AIR 0-25 l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II AIR 0-25 l/min MEDIFLOW + p Medap O l/min MEDIFLOW + p Medap O l/min DUO DIN FLOWMETER "R" with a neutral COLOr hose 1,5 m BLACK (bl) Art. Nr. Description Gas Flow range Hose MEDIFLOW ULTRA II AIR 0-25 l/min 1.5m bl MEDIFLOW ULTRA II O l/min 1.5m bl MEDIFLOW ULTRA II O l/min 1.5m bl MEDIFLOW ULTRA II DUO Y O l/min 1.5m bl MEDIFLOW ULTRA II DUO Y O l/min 1.5m bl MEDIFLOW ULTRA II DUO Y AIR 0-25 l/min 1.5m bl MEDIFLOW + r Medap O l/min 1.5m bl MULTISTAR O l/min 1.5m bl DIN FLOWMETER "R" with color-coded hose 1.5 m Art. Nr. Description Gas Flow range Hose MEDIFLOW ULTRA II AIR 0-25 l/min bl/wh MEDIFLOW ULTRA II O l/min wh MEDIFLOW ULTRA II DUO Y O l/min wh MEDIFLOW ULTRA II DUO Y AIR 0-25 l/min bl/wh MEDIFLOW + r Medap DUO Y O l/min wh FLOWMETER "P" (NF)AFNOR with plug Art. Nr. Description Gas Flow range MEDIFLOW ULTRA II O l/min MEDIFLOW ULTRA II AIR 0-25 l/min MEDIFLOW ULTRA II DUO AIR 0-25 l/min MEDIFLOW ULTRA II DUO O l/min FLOWMETER "R" with a neutral color hose 1,5 m black Art. Nr. Description Gas Flow range Hose MEDIFLOW ULTRA II AIR 0-25 l/min 1.5m bl MEDIFLOW ULTRA II O l/min 1.5m bl MEDIFLOW ULTRA II DUO AIR 0-25 l/min 1.5m bl MEDIFLOW ULTRA II DUO O l/min 1.5m bl Legend: MEDIMETER R NF1, 5 15 O 2 Duo = eg: MEDIMETER (name), R (rail / rail version), P (sample/connector version), DIN/NF (standard), 1,5 (1,5 m hose length), 15 (Flow in l/min), O 2 (gas), Duo (two outlets). D1 D2 D3 26 D4 D7 D10

29 TECHNICAL DATA - mediflow ultra Inlet pressure: 2,8-8,0 bar Outlet pressure: max. 2,1 bar Flow levels: 0 to 2 l/min 0 / 0,1 / 0,2 / 0,3 / 0,4 / 0,5/ 0,6 / 0,7 / 0,8 / 1 / 1,5 / 2,0 0 to 6 l/min 0 / 0,25 / 0,5 / 0,75 / 1 / 1,5/ 2 / 2,5 / 3 / 4 / 5 / 6 0 to 25 l/min 0 / 1 / 2 / 3 / 4 / 5/ 6 / 7 / 9 / 12 / 15 / 25 Inlet connections: Countries and gas type-specific Outlet Connections: 9/16 "UNF with hose nipple NF (AFNOR versions M ) Body material: Nickel-plated brass Operating temperature: -20 C to 60 C Storage temperature: -30 C to 60 C Outer plastic parts: Polyamide O-rings: EPDM Filter: Sintered bronze / fabric filter V2A Regulatorischer Status: met MDD 93/42/EEC, Class 2a, complies with EN Reducer latex free: , complies with EN g - T= g B= g Note! Measurements in mm. 27

30 ACCESSORIES - MediWet II Humidifier The humidifier for oxygen therapy is a device allowing an increase in the relative humidity in the oxygen supplied to the patient. Art. Nr. Description K Mediwet 134 ºC inlet connection 9/16 UNF F K Mediwet 134 ºC inlet connection G 3/8 F K Technical data Contents: Only sterile water Dimensions: Height 190 Width 67 (incl hose nipple) Ø 57 mm Weight: Polysulphone version 115 g Capacity: 200 ml of water Consumption: 6 ml of water per hour at a gas flow of 10 l/min at 20 ºC Material: Jar autoclavable at 134 ºC: polysulphone Lid and outlet hose nipple: polypropylene Inlet nut: Chromed brass Diffuser: Polyethylene Hose, flat gasket: Silicone Gasket: O-ring EPDM Outlet connection: Tapered hose nipple for hose 6 9 mm (recommended length 2 m) Cleaning: Water, non abrasive detergent. Never use solvents. Disinfection: An alcoholic solution, or other solution compatible with the material according to the disinfectant manufacturer. Autoclave: Polysulphone version 134 ºC for 18 minutes Special case: Diffuser: exchange at every cleaning - do not sterilise! Maintenance: Check that the humidifier is whole and air tight before use. Monthly exchange of gaskets is recommended. Exchange the diffuser when its microperforations no longer exist. Durability: Minimum 20 autoclave cycles under the condition that all instructions accompanying the product are adhered. Spare Parts Art. Nr. Description K Jar 134 ºC K Lid 134 ºC connection 9/16 UNF K Lid 134 ºC connection G3/8 K Inlet connection gasket 9/16 UNF, 10 pcs K Bottle gasket 134 ºC, 10 pcs ConsuMABLes Art. Nr. K Description Complete diffuser (tube 13 cm and diffuser, 10 pcs) 28

31 suction equipment medievac+ Compact and lightweight medical vacuum regulator system, which allows the user to efficiently and safely control suction therapy The suction level of the Medievac+ is regulated via an easy accessible, front mounted control knob A special feature of the Medievac+ on-off valve is easy resumption of the selected de-pressure value, when the treatment is interrupted The Medievac+ gauge can easily be rotated, allowing the vacuum pressure to be clearly viewed by the operator The gauge scale is colour coded in sections to display a clear indication of suction level Two versions of adjustable pressures are available to cover all therapy needs(-250 and 1000 mbar) The 250 mbar version has a safety valve, which will automatically shut off to guarantee maximum protection of the patient, in the unlikely event of de-pressure increase The compactness of the device offers: Fast connection to the vacuum source Quick and convenient mounting of accessories (for example safety jar) Good accessibility of other devices connected to close located terminal units 29

32 MediEVAC+ MediEVAC 1000-P DIN with plug for direct plugging into the wall outlet 360 rotatable gauge outlet thread 1/2" hose not included outlet thread for screwing the accessory security container or hose suction power adjustable up to -950 mbar alternatively Medievac 250 or 600, can be set to -250 or -600 mbar MediEVAC R DIN with DIN rail clamp and hose 1.5 m otherwise Medivac DIN 1000-P MediEVAC+ 250-P NF AFNOR (NF) connector for direct plug into the wall socket 360 rotatable gauge not outlet G1/2" hose included adjustable up to mbar Medievac or alternatively, set to -600 or -950 mbar hose nipple 1/2 for bolting to the outlet terminal of the vacuum regulator for attachment of the suction hose SAFETY JAR 100 ml for screwing onto the threaded outlet of the vacuum regulator captures secretion, which was aspirated by the suction of the safety device a ball valve prevents the ingress into the vacuum system of secretion outlet connector for direct plug of a suction hose or the bacteria filter ANTIBACTERIAL FILTER antibacterial filter for attachment to the output terminal of the containment 30

33 MediEVAC technical DATA ON-OFF function: To switch ON: Max. inlet pressure: - Max. suction flow: Accuracy of gauge: Safety valve: Inlet connection: Outlet connection: Height: Width: Depth: Body material: Regulatory status: ON : green button visible push on the red button 950 mbar (Measured from atmospheric pressure) 70 l/min ±5 l/min ±2,5 % of full scale Medievac+ 250 only max mbar opening According to national standards G1/2 male 133 mm; 260 mm (with safety jar) 63 mm 77 mm (without connector) ABS Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Medical suction Equipment, Part 3: Suction equipment powered from a vacuum or pressure source). 63 Art. Nr. Description MEDIEVAC P DIN MEDIEVAC P DIN MEDIEVAC P DIN MEDIEVAC R DIN MEDIEVAC R DIN MEDIEVAC R DIN MEDIEVAC P NF MEDIEVAC P NF MEDIEVAC P NF Safety Jar 100ml K Antibacterial filter pack of Hose nipple 1/2" for i MediEvac

34 ACCEssories for Medievac The Medievac+ vacuum regulator system includes an optional accessory, the safety jar. It is an additional protection of the vacuum regulator and the hospital vacuum network, when the collection jars overflow. The filling capacity of 100 ml and the safety valve function, provide the user with extra time to stop the suction therapy. The jar can be easily and safely disconnected from the vacuum regulator and autoclaved at 134 C for 18 minutes, in line with hospital protocols. GCE Mediline also recommends the use of the front mounted filter that is connected on the safety jar for increased safety. The plastic shell of the filter is very convenient to mount; it enables hygienic handling as direct contact with the membrane is avoided. The use of this filter is also recommended by the standard (EN ISO part ). Medievac+ compliance is based on EN ISO standard. Art. Nr. Description Safety jar 100 ml Safety jar 100 ml including filter K Filter ( 10) Olive suction tip large Olive suction tip small K Hose nipple G1/2 + O-ring 32

35 suction equipment medieject The suction ejectors Medieject-32 and Medieject-33 come with either a metal bracket for rail mounting, with a quick coupling for direct connection to gas outlet The negative pressure can be seen clearly on the front-mounted gauge The suction ejector has an ON/OFF control knob The suction effect is regulated with a needle valve It has a low sound level and requires a minimum of maintenance 33

36 MediEJECT MediEJECT P Suction injector for direct insertion into gas outlets Air or O 2 gas drive Suction power adjustable zero to minus 800 mbar MediEJECT R MediEject as P, but for attaching to equipment rails, with 1.5 m hose Please order rail or wall mounting clamp separately silencer PRESSURE GAUGE ON-OFF VALVE KIT HOSE NOZZLE WITH GASKET PRESSURE GAUGE GLASS

37 MEDIEJECT Positive gas pressure of the oxygen gas or air outlet is in MediEject according to the ejector in a vacuum (negative pressure) is converted. A knob, the suction can be adjusted and read on the pressure gauge (-80 KPa = mbar). The amount of the active vacuum is read directly on the manometer. 96 About the ON/OFF pull the suction can be turned off and on while maintaining the set MediEject works very quietly 115 The secretion MediEject device is clamped to either DIN rail or plugged with a quick coupling directly into the output of a gas supply TECHNICAL DATA ON-OFF function: Max. inlet pressure: Max. suction flow: Max. gas consumption: ON: ON/OFF switch pulled OFF: ON/OFF switch pushed mbar 25 l/min 38 l/min Accuracy of gauge: ± 2,5 % Inlet connection: Outlet connection: Body dimension: Weight: Height: Width: Depth: Temperature range: Humidity: Regulatory status: Classification: According to the respective national standard Hose nipple 130 mm 105 mm 53 mm without connector Storage: - 40 C to 60 C Operation: - 18 C to 50 C 0,370-0,450 kg (depending on probe type) max 70 % RH Complies with medical devices directive 93/42/EEC. Complies with EN (medical suction equipment). Class IIa Manufacturer: GCE, s.r.o, Žižkova Chotěboř, CZ Note! Measurements in mm. Art. Nr. Description MediEject -P DIN MediEject -R DIN spare parts Silencer for MediEject Pressure gauge for MediEject Knob for MediEject On-Off Valve Kit MediEject Hose nozzle with seal 35

38 MediCOLLECT MediCOLLECT 300 Secretion collection bottle 0.3 l Inlet: 1/2" female thread Outlet: Hose K MediCOLLECT Secretion collection bottle 0.5 l Inlet and outlet: Hose nipple MediCOLLECT 1000 Secretion collection bottle 1.0 l Inlet and outlet: Hose nipple MediCOLLECT 2000 Secretion collection bottle 2.0 l for insertion in the holding basket K Inlet and outlet: Hose nipple K MediCOLLECT 2000 R K Secretion collection bottle 2.0 l for insertion into the rail terminal or wall mount Inlet and outlet: Hose nipple MediCOLLECT 4000 Secretion collection bottle 2.0 l Inlet and outlet: Hose nipple

39 ACCESSORIES - Suction Bottles - WITH SINGLE USE BAGS Suction bottles - single used bags Art. Nr. Description Suction bottle 2 l Complete with lid Suction bag 2 l (20 pcs) Suction bottle 1 l Add lid art. no to make complete Suction bag 1 l (20 pcs) ACCessories Art. Nr. Description Connection for suction bag Silicone hose; 25m; Silicone hose; 5m; Silicone hose; 1m; Lid for suction bottle Silicone hose; 5m; Silicone hose; 1m; 6 12 K K Catheter holder (without plate) Catheter holder (with plate) K K ACCESSORIES - Suction jars - MediCOLLECT 2000 Medicollect 2000 is a range of reusable jars for collection of secretion. For protected and hygienic use of unbreakable material, guaranteed airtight, with an overflow valve and autoclavable material. Art. Nr. Description K Medicollect 2000 with lid (134 C) K Medicollect 2000 with lid (121 ºC) K K ACCessories and Spare Parts Art. Nr. Description K Rail clamp plastic for slitz plate K Jar 134 ºC K Complete overflow valve ConsuMABLes Art. Nr. K Description Manual vacuum stop device, non sterile for adults 37

40 MediCOLLECT HOLDING BASKET MEDICOLECT HOLDING BASKET MEDICOLECT MOUNTING ASSEMBLY MEDICOLECT 2000 DIN RAIL CLAMP K with withdrawable unit suitable for all MEDIEVAC and MEDICOLECT WALL CLAMP as with 2 countersunk screws for mounting DIN RAIL 1.0 m MM stainless steel with 3 mounting feet per meter SUCTION HOSE WITH FINGERTIP CONTROLS Length 1.5 m Packaging unit 100 pcs 38

41 MediCOLLECT With the MEDICOLECT secretions collecting bottle, the vacuum system. With the help of a ball valve against the ingress of secretion is protected. The bottles may be autoclaved at 121 C 15 min. For different sized bottles are appropriate mounting bracket and rail terminals. TECHNICAL DATA ON-OFF-Funktion: Maximum inlet pressure: Max suction: Maximum suction capacity: Maximum gas consumption: Pressure gauge accuracy: Inlet connector: Outlet: Body dimensions: Height: Width: Depth: Storage temperature range: Working: Weight: Body material: Standards and Regulations: switched on: black knob pulled off: press black button 5,5 bar -800 mbar 25 l/min 38 l/min ± 5% of reading Combination connector for Air or O 2, DIN Hose nipple 7 to 9 mm 110 mm 104 mm 53 mm without plug -40 C to +60 C at 40-70% RH -18 C to +50 C = 0,780 kg = 0,430 kg ABS meets the essential requirements of the Medical Devices Act (MPG MDD 93/42) Vacuum ejector: corresponds to class 2a medical device complies with EN ISO Suction: Manufacturer: CE marking: CE marking: corresponds to Class 1 medical GCE Norden AB, Flygfaltsvagan 1, SE 2123 Malmö CE0413 CE0434 Art. Nr. Description MediEject -P DIN MediEject -R DIN Silencer for MediEject Pressure gauge for MediEject Knob for MediEject On-Off Valve Kit MediEject Hose nozzle with seal 39

42 CLEANNING RECOMMENDATIONS FOR MEDICOLLECT MediEvac MediEject Rail clamps, Wall clamps, Baskets for suction bottles returnable secretion collector MediCollect Components Cleaning disinfection Rinsing in washer Sterilization complete device complete device complete device Clippings Clippings MediCollect 100 in warm water and with mild household Cleaners in warm water and with mild household Cleaners in warm water and with mild household Cleaners all products warm Water and mild household Cleaners disinfectant wipes with Terralin or comparable disinfectant wipes with Terralin or comparable disinfectant wipes with Terralin or comparable all product dilute solution dipping followed by distilled rinse water and dry no no Wash to 95 C Wash to 95 C Wash to 95 C secretion cover Wash to 95 C Ball Valve Anti-overflow -valve no no Hot steam sterilization to 121 C Hot steam sterilization to 121 C Hot steam sterilization to 121 C Hot steam sterilization to 121 C Wash to 95 C to 121 C connection hose Wash to 95 C no no Suction with Fingertip Re not allowed renew items once, with each patient Antibacterial filter MediEject & MediEvac Re not allowed renew products, disposable, each patient use 40

43 Low pressure hoses The dimensions and colours of our polyvinyl chloride manufactured, textile-reinforced hoses are in accordance with the current hospital standard Allowed working pressure max. 14 bar The hoses for medical breathing oxygen and nitrous oxide are marked with the chemical denomination of the gas The medical breathing air hose is marked AIR Static Phthalates free Art. Nr. Denomination Colour Max. Dimension Roll pressure (inner/outer) Medical breathing oxygen White 14 bar 6/11 30 m Nitrous oxide Blue 14 bar 6/11 30 m Medical Breathing AIR Black/white 14 bar 8/14 30 m Medical Breathing AIR Black/white 14 bar 6,7/12,7 30 m Gas outlet Blue/brown 14 bar 12/17,4 30 m Vacuum/UTS Yellow 14 bar 10/16 30 m Carbon dioxide Grey 14 bar 6/11 30 m Mixed gas Red 14 bar 6/11 30 m O 2 /N 2 O White/blue 14 bar 6,7/12,7 30 m Suction hose Transparent - 6/12 25 m 41

44 Low pressure Hoses - MediConnect MediConnect is a new generation of flexible hoses for gas supply, intended for use with respiratory, anaesthetic and emergency equipment. Resistant to abrasion and change of colour Containing antistatic inner layer Neutral colours or according to colour coding of EN ISO 5359 Wide range of country specific connections Lengths of hoses from 0,5 to 5 m; to be specified by customer Phthalates free Technical Data Gas pressure: O 2, AIR, N 2 O, vacuum Material: Polyvinyl chlorid, containing plasticizer, with brilliant polish, antistatic Inner/outer diameter: 6,7 12,7 mm Wall: 3 mm Hardness (Shore A): 88 ± 5 Density: 1,25 ± 0,02 g/cm 3 Tensile strength: = 10 MPa Fracture strain: = 200 % Working pressure: max. 14 bar / 20 C Rupture pressure: 56 bar / 20 C respectively 40 bar / 40 C Operation temperature: - 20 C to + 60 C Nordic Standard Probe French Standard Probe British standard probe German Standard 120 Probe 42

45 MediConnect Low-pressure hose systems for medical gases Abrasion and discoloration-free tube with mirror finish antistatic fabric Phthalate free neutral color or by color coding ISO 32 a variety of country-specific connections available Hose lengths 0.5 to 5 meters available According to EN 739 TECHNICAL DATA Material: Polyvinyl chloride, plasticizers containing Textile reinforcement: with high-gloss, latex free Inner diameter: 6,40 6,70 mm Wall thickness: 2,70 3,15 mm Shore A hardness: 87 ± 5 (applies to Rolls unprocessed) Density: 1,25 ± 0,02 g/cm 3 Tensile strength: 10 MPa 3 Elongation at break: 200 % Antistatic: Weight: 110 g (1 m hose without fittings) Operating pressure: max. 14 bar / 20 C (applies to Rolls unprocessed) Burst pressure: 56 bar / 20 bar and 40 C / 40 C Operating temperature: 20 C to 65 C Max print area in use: From 3.0 to 14 bar 0.1 to 1.0 bar absolute pressure for vacuum hose Maximum pressure drop: <500 mbar at 3.2 bar and 200 l/min Maximum tensile forces: 600 N, 300 N for vacuum Temperature: -40 C to +75 C Operating temperature: -20 C to +60 C Humidity: 5% to 95% RH Barometer: hpa Maximum life span: 10 years from date of manufacture Standards: Conforms to: the basic requirements of Medical Devices Act (MPG MDD93/42) Conforms to: Medical Device Class 2a Met: EN ISO 5359 CE mark: CE0434 Manufacturer: GCE sro, Chotebor, CZ We are forced by our ERP system to use article texts allow a maximum of 30 characters. Therefore, we often need to recourse abbreviations which should nevertheless allow you to article texts that appear on invoices and delivery notes a ausage the quality of the product make. EXPLANATION HOSE O 2 BL 0,5M DIN120 / DINQC Hose hose GAs O 2 Air N 2 0 CO 2 Vac colours BL black WH white BL/WH black/white GR green BLUE blue YEL yellow LENGHT 0,5M - 5 m Form SP3 Spiral hose 3m INLET DIN90 = DIN plug 90 angled DIN120 DIN connector angled = 120 M 12 1 = Screw gas-specific O 2 with M12 1 thread M17 1 = screw gas-specific AIR with M17 1 thread M 14 1 = Screw gas-specific N 2 O with M14 1 thread M 15 1 = Screw gas-specific O 2 /Air with M15 1 thread M 20 1,5 = Screw gas-specific Air with M20 1,5 thread NF 90 = 90 standard Francaise plug 90 angled NF = standard Francaise Plug straight OUTLET as inlet ports, additional variants: DIN QC = DIN Quick Coupler NF QC = NF Quick couple NIST = NIST straight NIST 90 = NIST 90 angled R 1/4 INT = VAC Connection for 1/4" female thread 43

46 MEDICONECT HOSE O 2 O 2 DIN NEUTRAL COLOR BLACK Art. Nr. Description HOSE O 2 BL 0,5m DIN120/DIN HOSE O 2 BL 0,5m DIN120/DINQC HOSE O 2 BL 0,5m DIN120/M HOSE O 2 BL 0,5m DIN120/NIST HOSE O 2 BL 0,5m DIN120/NIST HOSE O 2 BL 0,5m M15 1/NIST HOSE O 2 BL 1,5m DIN120/DIN HOSE O 2 BL 1,5m DIN120/DINQC HOSE O 2 BL 1,5m DIN120/M HOSE O 2 BL 1,5m DIN120/NIST HOSE O 2 BL 1,5m DIN120/NIST HOSE O 2 BL 3m DIN120/DIN HOSE O 2 BL 3m DIN120/DINQC HOSE O 2 BL 3m DIN120/M HOSE O 2 BL 3m DIN120/NIST HOSE O 2 BL 3m DIN120/NIST HOSE O 2 BL 5m DIN120/DIN HOSE O 2 BL 5m DIN120/DINQC HOSE O 2 BL 5m DIN120/M HOSE Ov BL 5m DIN120/NIST HOSE O 2 BL 5m DIN120/NIST HOSE O 2 BL SP1,5 DIN120/M HOSE O 2 BL SP1,5 DIN120/NIST HOSE O 2 BL SP3 DIN120/M HOSE O 2 BL SP3 DIN120/NIST90 O 2 Din ISO COLOR CODED WHITE Art. Nr. Description HOSE O 2 WH 0,5m DIN120/DIN HOSE O 2 WH 0,5m DIN120/DINQC HOSE O 2 WH 0,5m DIN120/M HOSE O 2 WH 0,5m DIN120/NIST HOSE O 2 WH 0,5m DIN120/NIST HOSE O 2 WH 0,5m M15 1/NIST HOSE O 2 WH 1,5m DIN120/DIN HOSE O 2 WH 1,5m DIN120/DINQC HOSE O 2 WH 1,5m DIN120/M HOSE O 2 WH 1,5m DIN120/NIST HOSE O 2 WH 1,5m DIN120/NIST HOSE O 2 WH 3m DIN120/DIN HOSE O 2 WH 3m DIN120/DINQC HOSE O 2 WH 3m DIN120/M HOSE O 2 WH 3m DIN120/NIST HOSE O 2 WH 3m DIN120/NIST HOSE O 2 WH 5m DIN120/DIN HOSE O 2 WH 5m DIN120/DINQC HOSE O 2 WH 5m DIN120/M HOSE O 2 WH 5m DIN120/NIST HOSE O 2 WH 5m DIN120/NIST HOSE O 2 WH SP1,5 DIN120/M HOSE O 2 WH SP1,5 DIN120/NIST HOSE O 2 WH SP3 DIN120/M HOSE O 2 WH SP3 DIN120/NIST90 44

47 MEDICONECT HOSE O 2 O2 AFNOR NEUTRAL COLOR BLACK Art. Nr. Description HOSE O 2 BL 0,5m NF90/M HOSE O 2 BL 0,5m NF90/NF HOSE O 2 BL 0,5m NF90/NFQC HOSE O 2 BL 0,5m NF90/NIST HOSE O 2 BL 0,5m NF90/NIST HOSE O 2 BL 1,5m NF90/M HOSE O 2 BL 1,5m NF90/NF HOSE O 2 BL 1,5m NF90/NFQC HOSE O 2 BL 1,5m NF90/NIST HOSE O 2 BL 1,5m NF90/NIST HOSE O 2 BL 1,5m NF90NF HOSE O 2 BL 3m NF90/M HOSE O 2 BL 3m NF90/NF HOSE O 2 BL 3m NF90/NF HOSE O 2 BL 3m NF90/NFQC HOSE O 2 BL 3m NF90/NIST HOSE O 2 BL 3m NF90/NIST HOSE O 2 BL 5m NF90/M HOSE O 2 BL 5m NF90/NF HOSE O 2 BL 5m NF90/NFQC HOSE O 2 BL 5m NF90/NIST HOSE O 2 BL 5m NF90/NIST90 O 2 AFNOR ISO COLOR CODED WHITE Art. Nr. Description HOSE O 2 WH 0,5m NF90/M HOSE O 2 WH 0,5m NF90/NF HOSE O 2 WH 0,5m NF90/NFQC HOSE O 2 WH 0,5m NF90/NIST HOSE O 2 WH 0,5m NF90/NIST HOSE O 2 WH 1,5m NF90/M HOSE O 2 WH 1,5m NF90/NF HOSE O 2 WH 1,5m NF90/NF HOSE O 2 WH 1,5m NF90/NFQC HOSE O 2 WH 1,5m NF90/NIST HOSE O 2 WH 1,5m NF90/NIST HOSE O 2 WH 3m NF90/M HOSE O 2 WH 3m NF90/NF HOSE O 2 WH 3m NF90/NF HOSE O 2 WH 3m NF90/NFQC HOSE O 2 WH 3m NF90/NIST HOSE O 2 WH 3m NF90/NIST HOSE O 2 WH 5m NF90/M HOSE O 2 WH 5m NF90/NF HOSE O 2 WH 5m NF90/NFQC HOSE O 2 WH 5m NF90/NIST HOSE O 2 WH 5m NF90/NIST90 45

48 MEDICONECT HOSE O 2 O 2 NIST NEUTRAL COLOR BLACK Art. Nr. Description HOSE O 2 BL 0,5m M15 1/NIST HOSE O 2 BL SP 3m M12 1/M HOSE O 2 BL SP 3m M12 WALTHER O 2 NIST ISO COLOR CODED WHITE Art. Nr. Description HOSE O 2 WH 0,5m M15 1/NIST HOSE O 2 WH 0,5m NIST/M HOSE O 2 WH 1,5m NIST/M HOSE O 2 WH 1m M15 1/NIST HOSE O 2 WH 0,5m 9/16/NIS MEDICONECT HOSE AIR MEDICONECT HOSE AIR AIR DIN NEUTRAL COLOR BLACK Art. Nr. Description HOSE AIR BL 0,5m DIN120/DINQC HOSE AIR BL 1,5m DIN120/DINQC HOSE AIR BL 3m DIN120/DINQC HOSE AIR BL 5m DIN120/DINQC HOSE AIR BL 0,5m DIN120/NIST HOSE AIR BL 1,5m DIN120/NIST HOSE AIR BL 3m DIN120/NIST HOSE AIR BL 5m DIN120/NIST HOSE AIR BL 0,5m DIN120/NIST HOSE AIR BL 1,5m DIN120/NIST HOSE AIR BL 3m DIN120/NIST HOSE AIR BL 5m DIN120/NIST HOSE AIR BL 0,5m DIN120/M20 1, HOSE AIR BL 1,5m DIN120/M20 1, HOSE AIR BL 3m DIN120/M20 1, HOSE AIR BL 5m DIN120/M20 1, HOSE AIR BL 0,5m DIN120/DIN HOSE AIR BL 1,5m DIN120/DIN HOSE AIR BL 0,5m M20 1,5/NIST90 AIR DIN ISO COLOR CODED BLACK/WHITE Art. Nr. Description HOSE AIR BL/WH 0,5m DIN120/DINQC HOSE AIR BL/WH 1,5m DIN120/DINQC HOSE AIR BL/WH 3m DIN120/DINQC HOSE AIR BL/WH 5m DIN120/DINQC HOSE AIR BL/WH 0,5m DIN120/NIST HOSE AIR BL/WH 1,5m DIN120/NIST HOSE AIR BL/WH 3m DIN120/NIST HOSE AIR BL/WH 5m DIN120/NIST HOSE AIR BL/WH 0,5m DIN120/NIST HOSE AIR BL/WH 1,5m DIN120/NIST HOSE AIR BL/WH 3m DIN120/NIST HOSE AIR BL/WH 5m DIN120/NIST HOSE AIR BL/WH 0,5m DIN120/M20 1, HOSE AIR BL/WH 1,5m DIN120/M20 1, HOSE AIR BL/WH 3m DIN120/M20 1, HOSE AIR BL/WH 5m DIN120/M20 1, HOSE AIR BL/WH 0,5m DIN120/DIN HOSE AIR BL/WH 1,5m DIN120/DIN90 46

49 AIR AFNOR NEUTRAL COLOR BLACK Art. Nr. Description HOSE AIR BL/WH 0,5m NF90/M20 1, HOSE AIR BL/WH 0,5m NF90/NF HOSE AIR BL/WH 0,5m NF90/NFQC HOSE AIR BL/WH 0,5m NF90/NIST HOSE AIR BL/WH 0,5m NF90/NIST HOSE AIR BL/WH 1,5m NF90/M HOSE AIR BL/WH 1,5m NF90/M20 1, HOSE AIR BL/WH 1,5m NF90/NF HOSE AIR BL/WH 1,5m NF90/NFQC HOSE AIR BL/WH 1,5m NF90/NIST HOSE AIR BL/WH 1,5m NF90/NIST HOSE AIR BL/WH 3m NF90/M HOSE AIR BL/WH 3m NF90/M20 1, HOSE AIR BL/WH 3m NF90/NF HOSE AIR BL/WH 3m NF90/NFQC HOSE AIR BL/WH 3m NF90/NIST HOSE AIR BL/WH 3m NF90/NIST HOSE AIR BL/WH 5m NF90/M HOSE AIR BL/WH 5m NF90/M20 1, HOSE AIR BL/WH 5m NF90/NF HOSE AIR BL/WH 5m NF90/NFQC HOSE AIR BL/WH 5m NF90/NIST HOSE AIR BL/WH 5m NF90/NIST90 MEDICONECT HOSE AIR AIR AFNOR ISO COLOR CODED BLACK/WHITE Art. Nr. Description HOSE AIR BL/WH 0,5m NF90/NFQC HOSE AIR BL/WH 1,5m NF90/NFQC HOSE AIR BL/WH 3m NF90/NFQC HOSE AIR BL/WH 5m NF90/NFQC HOSE AIR BL/WH 0,5m NF90/NIST HOSE AIR BL/WH 1,5m NF90/NIST HOSE AIR BL/WH 3m NF90/NIST HOSE AIR BL/WH 5m NF90/NIST HOSE AIR BL/WH 0,5m NF90/NIST HOSE AIR BL/WH 1,5m NF90/NIST HOSE AIR BL/WH 3m NF90/NIST HOSE AIR BL/WH 5m NF90/NIST HOSE AIR BL/WH 0,5m NF90/M20 1, HOSE AIR BL/WH 1,5m NF90/M20 1, HOSE AIR BL/WH 3m NF90/M20 1, HOSE AIR BL/WH 5m NF90/M20 1, HOSE AIR BL/WH 0,5m NF90/NF HOSE AIR BL/WH 1,5m NF90/NF HOSE AIR BL/WH 3m NF90/NF HOSE AIR BL/WH 5m NF90/NF AIR NIST NEUTRAL COLOR BLACK Art. Nr. Description HOSE AIR BL 0,5m M20 1,5/NIST HOSE AIR BL 0,5m NIST/M HOSE AIR BL 1,5m NIST/M17 1 AIR NIST ISO COLOR CODED BLACK/WHITE Art. Nr. Description HOSE AIR BL/WH 0,5M NIST/M HOSE AIR BL/WH1,5M NIST/M HOSE AIR BL/WH 5M DIN120/NIST 47

50 MEDICONECT HOSES VACUUM AND N 2 O DUE TO THE RELATIVELY SMALL NUMBERS ARE ONLY COLOR CODED N 2 O HOSES DIN Art. Nr. Description HOSE N 2 O BLUE 1,5m DIN120/DINQC HOSE N 2 O BLUE 1,5m DIN120/M HOSE N 2 O BLUE 1,5m DIN120/NIST HOSE N 2 O BLUE 1,5m DIN120/NIST HOSE N 2 O BLUE 3m DIN120/DINQC HOSE N 2 O BLUE 3m DIN120/M HOSE N 2 O BLUE 3m DIN120/NIST HOSE N 2 O BLUE 3m DIN120/NIST HOSE N 2 O BLUE 5m DIN120/DINQC HOSE N 2 O BLUE 5m DIN120/M HOSE N 2 O BLUE 5m DIN120/NIST HOSE N 2 O BLUE 5m DIN120/NIST90 N 2 O HOSES AFNOR Art. Nr. Description HOSE N 2 O BLUE 0,5m NF90/NF HOSE N 2 O BLUE 1,5m NF90/NF HOSE N 2 O BLUE 1,5m NF90/NFQC HOSE N 2 O BLUE 1,5m NF90/NIST HOSE N 2 O BLUE 1,5m NF90/NIST HOSE N 2 O BLUE 3m NF90/NF HOSE N 2 O BLUE 3m NF90/NFQC HOSE N 2 O BLUE 3m NF90/NIST HOSE N 2 O BLUE 3m NF90/NIST HOSE N 2 O BLUE 5m NF90/NF HOSE N 2 O BLUE 5m NF90/NFQC HOSE N 2 O BLUE 5m NF90/NIST HOSE N 2 O BLUE 5m NF90/NIST90 VACUUM HOSES DIN Art. Nr. Description HOSE VAC YEL 1,5m DIN120/NIST HOSE VAC YEL 1,5m DIN120/R1/4 INT HOSE VAC YEL 3m DIN120/NIST HOSE VAC YEL 3m DIN120/R1/4 INT HOSE VAC YEL 5m DIN120/NIST HOSE VAC YEL 5m DIN120/R1/4 INT VACUUM HOSES AFNOR Art. Nr. Description HOSE VAC YEL 1,5m NF90/NIST HOSE VAC YEL 1,5m NF90/R1/4 INT HOSE VAC YEL 3m NF90/NIST HOSE VAC YEL 3m NF90/R1/4 INT HOSE VAC YEL 5m NF90/NIST HOSE VAC YEL 5m NF90/R1/4 INT 48

51 MEDICONECT HOSES HOSE O 2 DISS-NIST GR 1,5m SPR Working length 1.5 m outer spiral Diameter 60 mm inner coil diameter 82 mm Inlet DISS fitting NIST outlet screw HOSE O 2 NF M12 1 WH 3m SPR Working length 3 m outer spiral Diameter 60 mm inner coil diameter 82 mm white HOSE O 2 DIN-NIST NEUTR 1,5m O 2 DIN NIST just 1.5 m long color neutral HOSE O 2 M15 1 NIST NEUTR 0,5m HOSE O 2 M15 1 NIST NEUTR 0,5m O 2 M NIST 0,5 m long color neutral HOSE O 2 NF-NF WH 1,5m O 2 AFNOR-AFNOR 1,5 m long white ELEMENTS OF PRODUCT SAFETY Secretion collection bottle 2.0 l Inlet and outlet: Hose nipple 49

52 CONNECTORS AND QUICK COUPLES CONNECTOrs AND QUICK COUPLes Art. Nr. Description DIN connector O 2, DIN connector O 2, DIN connector AIR, DIN connector AIR, DIN connector N 2 O, DIN connector VAC, Combined O 2 /AIR DIN connector, Combined DIN connector O 2 /AIR, M10 1A Combined O 2 /AIR DIN connector, 3/8" i DIN Quick Couple O 2, 3/8" A DIN Quick Couple O 2, 1/4" A DIN Quick Couple AIR, 3/8" A DIN Quick Couple AIR, 1/4 A DIN N2O Quick Couple, 3/8" A Walther Quick Couple, 1/8" A Gasket for 3/8" Quick Couple 10 pcs Gasket for 1/4" Quick Couple 10 pcs DIN hose nipple O 2, M DIN AIR nozzle, M20 1, DIN hose nipple N 2 O, M DIN hose nipple AIR/O 2, M NIST O 2 plug, straight NIST connector AIR, just NIST O 2 /AIR plug, straight NIST plug O 2, AIR NIST plug, NIST connector N 2 O, NIST female couple O NIST female couple AIR The options listed are a selection of the available country-specific variants with hoses that can be supplied

53 MEDICONNECT- CONNECTORS AND QUICK COUPLES NORDIC CONNECTOrs AND QUICK COUPLes Art. Nr. Description NORDIC O 2 connector, 6 mm NORDIC N 2 O connector, 6 mm NORDIC AIR connector, 8 mm NORDIC N 2 connector, 6 mm NORDIC CO 2 connector, 6 mm NORDIC connector VAC, 10 mm NORDIC gas outlet connector, 12 mm NORDIC connector INSTRUM, 8 mm NORDIC MEDIMIX connector, 6 mm NORDIC connector 90 O 2, 6 mm NORDIC connector 90 N 2 O, 6 mm NORDIC Stecker 90 AIR, 8 mm NORDIC connector 90 VAC, 10 mm NORDIC gas outlet connector NORDIC INSTR connector 90, 8 mm NORDIC Quick Couple O 2, 6 mm NORDIC Quick Couple N 2 O, 6 mm NORDIC Quick Couple MEDIMIX, 6 mm NORDIC AIR Quick Couple, 8 mm NORDIC Quick Couple CO 2, 6 mm NORDIC Quick Couple INSTRUM, 8 mm NORDIC Quick Couple VAC, 10 mm NORDIC Quick Couple outlet, 12 mm NORDIC-T Quick Couple O 2, 6 mm NORDIC-T Quick Couple AIR, 8 mm NORDIC Quick Couple 2-O 2, rail NORDIC Quick Couple 2-AIR

54 MEDICONNECT- CONNECTORS AND QUICK COUPLES CONNECTOrs AND QUICK COUPLes Art. Nr. Description AIR connector NF, 90 K NF connector O 2 K NF connector O 2, 90 K AIR connector NF, 90 K N 2 O NF connector, 90 K NF VAC connector, 90 K NF connector O 2 K NF connector AIR K NF connector N 2 O K NF connector CO 2 K NF VAC connector K K NF Quick Couple 3/8A O NF Quick Couple 3/8A AIR NF Quick Couple 3/8A N 2 O NF Quick Couple VAC 3/8A NF Quick Couple 1/4A O NF Quick Couple 1/4A AIR NF Quick Couple 1/4A N 2 O K NF Quick Couple VAC 1/4A KAWASAKI O 2 connector, straight KAWASAKI Quick Couple O Junron O 2 connector, straight K K K K Junron Quick Couple O MZ LIBEREC O 2 connector, straight MZ LIBEREC Quick Couple O AUSTRALIA O 2 connector, straight AUSTRALIA Quick Couple O 2, 3/8, UNI connector, consists of 3 parts MD35010, H , MD35010 H UNI connector E: G1/4" inside Hose G1/4"/ 6 mm hose nipple Gasket 11,1 8,5 10 ST MD35100 UNI Quick Couple O BSI Quick Couple O 2, BSI connector, consists of the following two parts MM3274, MM3274 BSI O 2 connector straight Hose nozzle with union nut G3/ DISS connector DISS Quick Couple 3/ Rectus QC Type 20L, pack of 1 unit The options listed are a selection of the available country-specific versions, which can be supplied with hoses MM Uni Stecker MD35010, H ,

55 MEDICONNECT- ADAPTER AND hose NIPPLES ADAPTER Art. Nr. Description Adapter 3/8 A - 9/16A Adapter 3/8 I - 1/8A Adapter 3/8 I - 3/8I Adapter 3/8 I - 9/16A Adapter 3/8 I - M10 1A Adapter 3/8 I - M10 1A Adapter 3/8 I - M12 1,25A Adapter 3/8 I - M12 1A Adapter 9/16 I - 3/8A FLACH Adapter 9/16 I - 3/8A KONI Adapter 9/16 I - 9/16 A Adapter 9/16 I - M12 1,25A Adapter G1/4 I - 9/16A Adapter M10 1A - 9/16A Adapter M10 1A - M12 1I Adapter M12 1A - 3/8A Adapter M12 1,25I - 3/8A Adapter M12 1,25II - 9/16A Adapter M18 1A - 9/16A Adapter M18 1I - 9/16A Adapter M22 1,5I - 9/16A Adapter M24 1,5A - 9/16A Adapter M24 1,5I - 9/16A Adapter M32 1,5A - 9/16A Adapter M34 1,5A - 9/16A Adapter W17,4 19I - 9/16A hose NIPPLES Art. Nr. Description Hose nipple 4-6 mm tree, 9/16"I Hose nipple 6 mm fixed, 3/8 I Hose nipple 6 mm fixed, 9/16 A Hose nipple 6 mm fixed, 9/16 I Hose nipple 6 mm fixed, G1/8 A Hose nipple 6 mm fixed, M12 1,25I Hose nipple 6 mm, 3/8 I flach Hose nipple 6 mm, 3/8 I KONI Hose nipple 6 mm, 9/16 I Hose nipple 6 mm, M12 1A Hose nipple 6 mm, M14 1A Hose nipple 6 mm, M15 1A Hose nipple 6 mm, M16 1,5I Hose nipple 6 mm, M20 1,5I Hose nipple 6 mm, 90, 3/8 I Hose nipple 6 mm, 90, 9/16 I EXPLANATION hose NIPPLE 6 mm FIXED, M12 1,25I With push-on hose 6 mm, fixed (non-rotatable) M12 1,25 female thread hose NIPPLE 6 mm, 3/8 I KONI With 6 mm push-on hose, 3/8" female, with cone seal ADAPTER 9/16 I - 3/8A FLACH Adapter with 9/16" female thread, other side has 3/8" male thread, flat sealing 53

56 trolleys Trolleys Art. Nr. Description Trolley for 10 l cylinder, 5-wheels, static P Trolley for 10 or 20 l cylinder, without belt Dimensions H W D (mm): Trolley for 10, 20 l cylinders, 3 10 l or 2 20 l without belt Dimensions H W D (mm): Trolley for gas cylinder, D=116 mm P ACCessories Art. Nr. Description Trolley Belt for 2.5 l cylinder P Belt for 5 or 10 l cylinder P, , Belt for 20 l cylinder , Cylinder Holders Cylinder Holders Art. Nr. Description Holder for 2 l cylinder (1 belt), D = 100 mm Holder for 2 or 3 l cylinder (2 belts), D = 100 mm Holder for 2 l cylinder (foot) P Holder for gas cylinder, D = 116 mm P Holder for gas cylinder, D = 100 mm P ACCessories Art. Nr. Description Bed hanger bracket T-Bracket 54

57 HOMECARE

58 oxygen conserving device ECOlite 4000 ECOlite 4000 is an electronic oxygen gas conserving device, which enables patient friendly and efficient long term oxygen therapy treatment (LTOT). With the ECOlite 4000, oxygen is delivered only during the inspiration phase, permitting savings of up to 10 times compared to continuous flow oxygen therapy The volume of oxygen needed for one breath is delivered during the first third of the inspiratory cycle, which guarantees both efficient and optimal treatment and a short exposure of the nasal mucosa to medical oxygen. A special feature of the ECOlite 4000 is the small, internal regulator, that allows the user to select a supply inlet pressure of between 1,6 to 5 bar. The working pressure of the device is regulated to 1,6 bar which enables a both clinically and physiologically patient friendly oxygen administration. The device has two operating modes, Automatic and Manual In the Automatic mode the amount of oxygen delivered increases in relation to the set flow rate at breath rates of 15 to 30 breaths per minute, to a maximum of 8 l/min. In the Manual mode the flow rates are from 0,5 to 8 l/min with 0,5 l/min steps If a specific flow rate is prescribed by the physician to be administrated, the flow settings can be locked at any rate by the health care personnel in charge of setting the flows on initial setup The device has several built in alarm functions for safe use. The alarms are shown on the display and are also audible The ECOlite 4000 has alarms for: Low battery No oxygen No breathing The battery life time of the device is prolonged to last for 200 hours. Standard AA 1,5 volt batteries are in use. 56

59 ECOlite 4000 OXYGEn Conserver Environmental Protection There are no known risks associated with disposal the ECOlite 4000 at the end of its working life. Batteries and electronics should be disposed of at an approved recycling facility. Other parts shall be recycled according to local regulations. Regulatory Status European Economic Area (EEA): This mark on the product indicates compliance with Directive 93/42/EEC relating to medical devices, Class IIa Liter/min 0434 Automatic mode Patented ,0 80,0 75,0 70,0 65,0 60,0 55,0 50,0 45,0 40,0 35,0 30,0 25,0 20,0 15,0 10,0 5,0 8 0, Breath/min Setting Manufacturers Information The ECOlite 4000 is manufactured at GCE. The month and year of manufacture is shown on the serial number label on the rear of the unit. Other than the consumables/accessories/spare part listed above there are no user replaceable parts. Only qualified service personnel, certified by the manufacturer, may attempt any repair to the ECOlite Not following this instruction will disqualify the manufacturers guarantee. Art. Nr. Description ECOlite 4000 COMPL SE ECOlite 4000 COMPL 1,6 bar ConsuMABLes Art. Nr. Description P Standard Nasal cannula, 10 pcs Spiral Hose SE Spiral Hose 1,6 bar ACCessories Art. Nr. Description ECOlite 4000 Carry Bag ECOlite 4000 Carry Bag Trolley Belt bag for ECOlite 4000 Spare Parts Art. Nr. Description Battery cover Technical DAtA Functional performance Settings: Manual/Automatic Triggering: At each breath Sensitivity: 0,13 cm H 2 O Regulating pressure: 1,6 bar Accuracy: 0,5-1,5 l/min +/- 30% 2-8 l/min +/- 15% Cycle output: 0.5 to 8 l/min coresponding to 5-80 ml per bolus Alarms: Battery monitoring Missing Oxygen supply No inhalation Power supply Battery: Oxygen supply Pressure: Flow: Dimensions and weight Dimensions: Weight: RO6, AA, Alkaline 1,5 V Between 1,6 and 5 bar Minimum 4 liters per minute Height: 101 mm Width: 85 mm Depth: 32 mm 184 g without battery Environmental condition Ambient temperature: Operational: -10 C to +40 C Storage: -40 C to +70 C Relative humidity: 25% to 95% 57

60 accessories for gas saver Art. Nr. Description Oxygen mask for adults under chin, single use Technical Data Hose length: Material: PVC Connection: Package: 2.1 m Soft material for best wearing comfort and optimal patienthandling Standard 50 pcs Art. Nr. Description Oxygen mask for children age to 1 to 10+, single use Technical Data Hose length: Material: PVC Connection: Package: 1.8 m Soft material for best wearing comfort and optimal patienthandling Standard 50 pcs Art. Nr. Description Nasal cannula Technical Data Hose length: Package: 2.1 m 50 pcs Art. Nr. Description Nasal cannula, flared Technical Data Hose length: Package: 2.1 m 50 pcs

61 OXYGEN CONCENTRATOR NUVO LITE MARK 5 Low weight of 13.6 kg space-saving and portable design with integrated carrying handle Flow adjustment knob lockable Flow from to 5 l/min adjustable faster, back access to filters and operating hours counter Art. Nr. Description Concentrator Mark 5 Nuvo Lite Main filter Back filter Antibacterial filter Disposable humidifier bottle Nasal cannula with 2.1 m hose Filter Set technical DATA Operating voltage: Power consumption: Fuse: 230 V, 50 Hz 290 W 5 A O 2 concentration: bei 2 l/min: >90% Operating noise: bei 5 l/min: 90 % (+6,5% - 3%) <40 dba Storage temperature: -20 to +60 C Ambient temperature: +5 to +40 C Weight: Dimensions (W H D): Working principle: 13,6 kg cm PSA (pressure swing absorbation) Standards: ISO 8359, EN Medical devices class: CE mark: Garantie: Manufacturer: IIb CE years Nidek, Birmingham, AL USA Flow adjustment knob lockable Hose connection Fuse switch 59

62 Nuvo 8 Art. Nr. Description Concentrator Nuvo 8 TECHNICAL DATA Operating voltage: Flow rate: 230 Volt 50/60 Hz 0.5 to 8 l/min. O 2 concentration: 0.5 to 7 l/min. - 93% (+6.5% / -3%) Power consumption: Operating pressure: Max working pressure adjustable: Security Alarm & Features: Filters: Battery for alarm horn: Weight: Dimensions: At 8 l/min. - 90% (+6.5% / -3%) 650 watts 1.17 bar or 17 psig ± 10% 2.75 bar pressure relief valve with energy problems in process errors is too high and too low Low pressure oxygen concentration when too high and too low voltage Overheating protection switch Backfilter, main filter and antibacterial filter 9 Volt < 23 kg 394 mm long 396 mm wide 706 mm high Environmental conditions: Room temperature: 10 C to 40 C Humidity: 15% to 95% Storage conditions: Temperature: -20 C to 60 C CE marking: CE 0413 Humidity: 15% to 95% 60

63 PORTABLE OXYGEN CONCENTRATOR Inogen One G2 THE ADVANTAGES small light compact INDEPENDENCE Whether at home or on the road, through the Inogen One G2 they get the independence they have missed, not only for small errands or short trips, they get real independence. You can now take your time without having to constantly look at the clock and think as long as the oxygen is still. THE POrtABLE OxyGen CONCentrATOR The G2 system includes the concentrator, carrying case, Combo Adapter 12V/240V, a 4-hour battery (12 cell), a nasal cannula and a transport caddy. 61

64 Inogen One G2 Art. Nr. Description Inogen One G2 with 12 Cell Battery System * Inogen One G2 with 24 Cell Battery System * * ( ): nasal cannula + manual + transport caddy + carrying case + 12 cell battery + AC adapter 12 Cell Akku 24 Cell Akku Netzteil ACCessories Art. Nr. Description Cell Battery 0,454kg Cell Battery 0,907kg External Battery Charger + Cable Power supply 12V/240V Carrying Case Transport Caddy Dust filter unit: 2 pcs V power cord V car cord Fuse for car cables Manual Backpack antibacterial filters with tool Set of 10 antibacterial filters TECHNICAL DATA Size: Weight: Operating noise: 27,4 10,1 24,1cm 3.2 kg <38 dba 12 Cell Battery: 4 hr/2 hr 24 Cell Battery: 8 hr/4 hr Produced oxygen: 900 ml/mina Oxygen concentration: 90 +6% /-3% Possible Flow setting: Aircraft capability: Safety: Warranty: CE mark: liter equivalent given automatic monitoring with acoustic error message 3 years on the device, 1 year battery CE012 G2 BATTERY USEFUL LIFE IN HOURS adjustment Cell 4 3:30 2:42 2:12 1:48 24 Cell 8 7 5:24 4:24 3:36 62

65 CONCENTRATOR INOGEN ONE G3 SYSTEM The new Inogen One G3 is a smaller, lighter and makes more oxygen per kg than previous model. It is a portable concentrator light enough to be worn care-free by the a tive oxygen user. That means there are no tanks to refill and no worry about running out of oxygen. 63

66 Inogen One G3 Art. Nr. Denomination Portable Concentrator Inogen One G3 8 cell battery Portable Concentrator Inogen One G3 16 cell battery Single Lithium Ion Battery* Up to 4 hours run time Double Lithium Ion Battery** Up to 8 hours run time ACCESSORIES Art. Nr. Denomination Inogen One G3 8 cell Battery Inogen One G3 16 cell Battery Inogen One G3 Ext Battery Charger Inogen AC Power Supply Inogen One G3 DC Power Cable Inogen One G3 Carry Bag Finger Pulse Oximeter SPARE PARTS Art. Nr. Denomination Inogen One G3 Particle Filters Inogen One G3 Output Filters qt Inogen One G3 Filter Spanner Wr Inogen One G3 Filter Repl Kit * Included with system ** Accessory sold separately Carry Bag* AC Power Supply* TECHNICAL DATA Weight: Size Length: Width: Height: Oxygen Flow: Power Sensing: DC Power: Battery Duration: Noise Level: Warranty: Operation: Use: * At setting 2 ** See Inogen One G3 Limited Warranty Statement for complete warranty information 2,7 kg 22,2 cm 7,6 cm 18,4 cm Intelligent Delivery Technology Four flow settings 1, 2, 3, 4 AC Power Supply V, Hz (auto sensing to allow worldwide use) for mobile use n car (single battery): 3.5 to 4 hours Recharge approximately 2-4 hours with AC or DC power Duration (double battery): 7 to 8 hours Recharge approximately 4-8 hours with AC or DC power 42 Decibels* 3 year** Simple control functions and easy-to-read LCD display Designed for 24/7 use, at home or away COMPARISON TO INOGEN ONE G3 64

67 EMERGENCY EQUIPMENT

68 demand valve EASE II The New Sabre EASE II portable systems provide a compact low resistance method of self-administering O 2 or O 2 /N 2 0. The EASE demand valve is constructed in a way that creates minimal breathing resistance to the patient and can deliver high flows when required. For greater user comfort the EASE II is both smaller and lighter than the original Sabre EASE. The new Easy Grip handle is another user friendly addition. On demand Oxygen or Nitrous Oxide/Oxygen system for delivering up to 300 l/min Portable first stage regulator and cylinder version for immediate care and pre-hospital applications. Low pressure pipeline version for obstetrics and general nursing applications. Conforms to BS 4272: Part 2: 1996 Low inspiratory effort demand valve Test/ Purge facility on the demand valve, easy to clean and reassemble for cross infection protocol Hose fitted with probes by the national standards for connection into cylinder system or wall outlet Autoclavable, removable handle The EASE II system is available to deliver Nitrous Oxide/Oxygen upon demand. It is available for use as a portable system with first stage regulator, or as a low pressure pipeline version. The EASE is designed to administer effective pain relief within a wide range of medical situations including immediate care, general practice and general nursing obstetrics. Conforming to BS 4272: Part 2:1996, the demand valve is designed to deliver up to 300 litres per minute of gas with minimal inspiratory effort by the patient. This valve also contains a removable patient valve that houses the exhalation flap and anti contamination valve. This can be removed and cleaned before replacement and re-use. Options The Sabre EASE range of products is structured in a way to allow the user to define their personal requirements of system, cylinder and carry options. 66

69 DEMAND VALVE EASE II O M WH DIN120 for O 2 Hose 1.5 m white 120 Angled DIN connector Includes mouthpiece DEMAND VALVE EASE II O M BL DIN 120 for O 2 Hose 1.5 m black 120 Angled DIN connector Includes mouthpiece DEMAND VALVE EASE II O M sp WH DIN 120 for O 2 White spiral hose 1,5 m 120 Angled DIN connector Includes mouthpiece DEMAND VALVE EASE II O M sp BL DIN 120 for O 2 Black spiral hose 1,5 m 120 Angled DIN connector Includes mouthpiece DEMAND VALVE EASE II O 2 /N 2 20 ss 3M WH / BLUE for O 2 /N 2 O mixture (ENTONOX ) Hose 3m white blue for gas mixture O 2 /N 2 O NORDIC Sweden plug to standard norm including respiratory mask 67

70 DEMAND VALVE EASE II O 2 /N 2 O nf 3M WH / BLUE for O 2 /N 2 O mixture (ENTONOX ) Hose 3m white blue for gas mixture O 2 /N 2 O Plug according to French standard AFNOR including respiratory mask PRESSURE REGULATOR MEDIREG II O 2 /N 2 O REN PI Working pressure 4.5 bar Flow outlet DIN QC For O 2 /N 2 O gas mixture Flow (l/min)>100 MEDIREG O 2 D DQC SMALL Working pressure 4 bar Flow outlet DIN quick coupling Art. Nr. Type of gas Description Mouthpiece / mask O 2 EASEII O 2 1,5M WH DIN120 Mouthpiece O 2 EASEII O 2 1,5M BL DIN 120 Mouthpiece O 2 EASEII O 2 1,5M SP WH DIN120 Mouthpiece O 2 EASEII O 2 1,5M SP BL DIN120 Mouthpiece O 2 /N 2 O EASEII O 2 /N 2 0 SS 3M wh/blue mask O 2 /N 2 O EASEII O 2 /N 2 O NF 3M wh/blue mask O 2 /N 2 O MediReg II O 2 /N 2 O REN PI O 2 Medireg O 2 D, DQC KL 68

71 VENTILATION ADAPTER The vent adapter can be placed if required to Ease II demand valve for venting of gases with the use of O 2 /N 2 O. BREATHING FILTER With 22 mm universal connector, bacteria filtration: %. 69

72 Demand VALVEs - EASE II Art. Nr. Gas Type Group Co. Ease II Variant Description O 2 /N 2 0 SE EASE II, 3 m hose, SS probe O 2 SE EASE II, 3 m hose, SS probe Technical DAtA Demand VALVE Gas: N 2 O/O 2, O 2 Material: Polycarbonate, silicone rubber, stainless steel Dimensiones: mm Weight: 0,085 kg Gas supply: Requirement 2,8 to 7,0 bar at >200 l/min Inspiratory resistance (At 2,8 bar supply press.): Cracking 0,15-0,2 kpa -0,2 kpa at 10 l/min -0,7 kpa at 200 l/min Expiratory resistance: Cracking Zero At flow +0,35 kpa at 120 l/min Operating temperature: -20 C tp +60 C used Oxygen +5 C to +40 C used 50/50 N 2 O/O 2 Storage temperature: -30 C to +60 C Hose Assembly Connection: Probes by the national standards Working pressure: 7 bar Burst pressure: 44 bar Material: PVC, anti-static in accordance with ISO 5359 Weight: 0,5 kg (3 m length) Manufacturer: GCE, s.r.o, Žižkova Chotebor, CZ ACCessories to EASE II Art. Nr. Description Case boxed c/w strap and frame Disposable mouthpiece (pack of 5 pcs) P Breathing filter (pack of 5 pcs) P Disposable facemask - medium (pack of 5 pcs) P Adult size reusable mask P Child size reusable mask Thermometer for N 2 O/O 2 cylinders Blue barrel carry bag P Adult/Child size mask, multiple use for Ease II P Expiration diverter single use for Ease II (pack of 1 pce) 70

73 Bag VALVE Masks COMPACt resuscitator with mask extension tube, for emergency respiration. Made from silicon rubber and autoclavable up to 136 C. Supplied with mask, oxygen reservoir, oxygen tube and mask extension tube. a) Masks a) mask, b) oxygen reservoir, c) oxygen tube, d) mask extension tube c) b) d) Art. Nr. Description Bag Valve Mask kit Technical DAtA Code: 01 Size: Adult Bellow Capacity: 1500 ml Oxygen Reservoir Capacity: 2600 ml Face Mask: Size # 4 and 5 Mask Extension Tube: 300 mm Material Bellow: Silicon Rubber Extension Tube: Silicon Rubber Masks: 4 & 5 Polycarbonate and Silicon Rubber Non-Return Valve: Polycarbonate Diaphragm: Silicon Rubber Reservoir Valve: Polycarbonate Reservoir Diaphragm: Silicon Rubber Oxygen Reservoir Bag: PVC* Oxygen Tube & Adaptor: PVC* (Tube Length 2 meters). *Polyvinyl Chloride Note: Product is Latex free. Guedele Airways are designed to maintain an unobstructed oropharyngeal airway during or following general anaesthesia and in patients who are unconscious for other reasons. Integral hard bite block avoids airway occlusion and biting of tongue. Stepless airway path for easy cleaning. Bite blocks are colour coded for instant identification of sizes. Each kit contains 2 pieces each of sizes 2, 3 & 4. Manufactured from non-toxic, non-irritant polymer PE. Individually packed in peelable soft blister pack. Sterile ready for use. Art. No P P Denomination Child silicone mask with multi-function mask cover Adult silicone mask with multi-function mask cover Technical DAtA Material: Mask: Silicone (Si) Multi-Function Mask Cover: Polysulfone(PSU) Head Strap: PolyVinylChloride (PVC) Attachment Ring: Polysulfone (PSU) Operating Environmental Conditions: -18 C to 60 C 15% to 95% relative humidity Storage Environmental Conditions : -40 C to 70 C 40% to 95% relative humidity Patient port on mask fit standard 15/22 mm connectors Product is in compliance with essential requirements of council directive 93/42 EEC Medical Device Directive 71

74 ambulance panel ambulance panel II The Ambulance Panel II is the next generation of ambulance panels. It is designed for permanent installation and use in road ambulances. Long experience in this market has resulted in a product that gives the customer a lot of options and flexibility. Flexibility Due to the design and functions there are a big range of variants available. The functions and variants can be combined upon customer s request. Modular The modular concept means that same components can be used for many variants, resulting in short lead times and full flexibility. The Ambulance Panel II is designed with same shape for recessed and exposed. Gauge Outlet Quick Couplings Manual switch-over 72

75 Ambulance gas panel II Art. Nr. Description Number Gas Flow Surface, Inlet Outlet Hose of head Flush, connector connector supplied control deep elements Flush* Ambulance Panel 4 DQC 4 O 2 no UP* 3/8" no no Ambulance Panel 3 DQC 3 O 2 no UP* 3/8" no no Ambulance Panel 2 DQC 2 O 2 no UP* 3/8" no no Ambulance Panel 1 DQC 1 O 2 no UP* 3/8" no no Ambulance Panel 1 DQC 1 AIR no UP* 3/8" no no Ambulance Panel 3 DQC 3 O 2 no UP* 3/8" no no +Manometer Flexi Units Flexi Unit 25 O 2 + MS32 2 O l. AP* 3/8" 3/8" no Flexi Unit 25 O O l. AP* 3/8" 3/8" no Flexi Unit 15 O O l. AP* 3/8" 3/8" 1,5 m bl Flexi Unit 25 O O l. AP* 3/8" 3/8" no Flexi Unit 25 O O l. AP* 3/8" 3/8" no Switch Switch H-O 1 O 2 no UP* 1/8"i 1/8"i no Switch GSS 1 O 2 no UP/AP* no Regulators on request Pressure regulator 1 O 2 no 3/4" 1/4" no with contact gauge Medireg 100 O 2, DQC 1 O 2 no 3/4" DIN QC no Medireg 100 O 2 D, KL3-8 1 O 2 no 3/4" 3/8" no Recessed Recessed mounting is when the ambulance panel is mounted in the wall. The inlet could either be mounted at the end or at the back depending on the wall construction and the space behind the wall. The only part that will be outside the wall is the quick connector. Recessed Exposed Inlet Quick Couplings Outlet Manual switch-over Sketch of expossed mounted panel Sketch of recessed mounted panel Sketch of double recessed mounted panel Exposed Exposed mounting is when the ambulance panel is mounted on the wall in the ambulance. The inlet could as the recessed, also be located at the end or at the back. When using the end inlet the hoses are fastened on the wall and fully visible. For some countries and regulations this is a must and the Ambulance Panel II has the features complying to these requests. The panel is fastened easily by 4 screws. Depending on the wall construction the fastening could either be done by a counter fastening frame or nuts and washers. Inlet The inlet connection the the Ambulance Panel II is standard 3/8 thread. This is a standard thread with conical sealing that has been used many times in this kind of application. Using a threaded connection gives the assembly easier and the parts easy to maintain and exchange. Quick Couplings There are many variants of quick couplings on the Ambulance Panel II. The most frequent standards are used on the Ambulance Panel II. For special quick couplings please contact GCE. By using standard components and quick couplings the assembly is easy and the maintenance access able and effective. Outlet The outlet is standard 3/8 thread connection. If additional panels are needed, the Ambulance Panel II can have extra outlets for panels mounted in series. The panels are then connected with a standard hose and hose connections. Manual switch-over The manual switch-over is a selector that chooses what cylinder is supplying the ambulance panel. There are three steps 1-0-2, where the 0 is off 1 is cylinder one and 2 cylinder two. The manual switch-over can be incorporated in the panel beside the other quick couplings or it could be mounted separately. 73

76 Gauge One of the additional functions in the Ambulance Panel II is the gauge on the panel. The gauge is showing the working pressure in the system and gives continuously surveillance and is fully visible by the staff in the ambulance. Gauge Flowselector flowselector The AP II module can be equipped with a flow selector. The flow selector is permanently attached to the AP II module and can be delivered with the flow settings 0-15 and 0-25 liter per minute. This integrated module gives the AP II a compact design and minimize the products sticking out from the wall. Suction The integrated suction ejector is a variant in the AP II system giving the end user a complete range of functions. The suction ejector uses the pressure in the system to create suction by the venture principle. The unit is operated by a simple on of button and a regulating knob to adjust the negative pressure. Ambulance Panel System (APS) The complete installation of the ambulance panel, hoses and regulators is called Ambulance Panel System. Suction Technical Data Weight: QC standards: example AP II O 2 2 SS R: 754g SS Gases: O 2 Standards: EN 1789:2008 Classification: Class IIb DIMENSIONS: Reccesed mounting exposed mounting Note! Measurements in mm. 74

77 Ambulance Panel II 3 DQC + Manometer Unterputz Ausführung, UP. Abbildung mit eingesteckten Geräten, nicht im Lieferumfang enthalten. (Von links nach rechts: MediMeter, O 2 Schlauch mit DIN Stecker, Flowregler MediFlow Ultra) Ambulance Panel II 1 DQC Unterputz Ausführung, UP. Eingangsanschluss 3/8 mit Schlauchtülle Flexfi Unit 25 O2 1 Aufputz Ausführung, AP. Eingangsanschluss 3/8 mit Schlauchtülle. Ausgangsanschluss 3/8 mit Schlauchtülle. technische Daten Schnellkupplungen: Gase: DIN, SS = Skandinavisch, NF= Französisch, BS = England O 2, AIR, Erfüllte Normen: EN1789 : 2008 Medizinprodukt Klasse: Hersteller: CE Kennzeichnung: 2b GCE sro, Zizkova 381, Chotebor, CZ CE

78 ambulance regulators medireg II VArimed The Ambulance regulators are regulators specifically for use in road ambulances. GCE has long experience with regulators and ambulance oxygen supply systems, and this has resulted in a new range of ambulance regulators, and to meet the requirements on the market. MediReg II with electronic signal gauge The Medireg is a new developed regulator in the GCE group. GCE has now adapted the Medireg with a signal gauge suitable for road ambulances. The Medireg with electronic gauge is suitable for ambulances with low to medium capacity needs. The Medireg together with the new ambulance panel products, GCE can offer a complete system for ambulance builders and ambulance services. varimed with electronic signal gauge The Varimed is the regulator suitable for road ambulances with medium to high capacity needs. The Varimed regulator is a product well established on the market. Together with the new concept of integrating the electronic gauge, GCE offers a range well suitable for the ambulance market. 76

79 AMBULANCE REGULATORS MediReg II with electronic signal gauge Technical DAtA Gas: O 2 Inlet pressure range: up to 200 bar Nominal outlet pressure: Inlet connection: Outlet connection: Body material: O-rings: Filter: Regulatory status: 4 bar according to national standards according to national standards or specification nickel-plated brass EPDM sintered bronze Classification: Class IIb Flow curve for oxygen (P2 = 4 bar) Complies with Medical Devices Directive 93/42/EEC. Complies with EN (Pressure regulators for use with medical gases) Complies with Standard EN 1789:2000 (Medical vehicles and their equipment - Road ambulances) 98.5 Ø55 W21,7x14 66 G 1/4 varimed with electronic signal gauge Art. Nr. Denomination Varimed O 2 Ø55 WIKA 172 W21.8x

80 Gauge with Electrical Output Signal (same for MediReg II and Varimed) Technical DAtA Design: Bourdon Tube EN Nominal size: Accuracy class: 2.5 Scale ranges: 50 mm bar Operating temperature: Ambient: C Medium: Temperature effect: temperature (+20 C): Pressure element: Movement: Dial: Pointer: Case: Window: +90 C maximum When temperature of the measuring system deviates from reference max. ±0.4 %/10 K of the span Cu-alloy, C-type Cu-alloy Plastic white, black lettering Plastic, black Stainless steel Plastic, clear (PC) Ingress protection: IP 65 per EN / lec 529 Electronics Output signals: Supply voltage (Vs): (275 indication angle) V, VS = V DC ma, 2-wire, VS = V DC 5 V DC / V DC Electromagnetic compatibility: According to test standards EN / EN

81 GSS The Automatic Gas Source Switch has been developed for devices such as transport incubators, respirators and anaesthesia devices, which can be supplied with gas from a cylinder during transport or whilst stationary connected to a central gas system. Economic and continuous gas supply from the central gas system will be made possible automatically and the safety of patients increased. Art. Nr. Type GSS 0 2 NIST GSS AIR NIST Key benefits Increased safety for users and patients Economic gas supply from wall outlet Less frequent replacement of gas cylinders Compact dimensions Simple connection to devices A green pressure indicator indicating gas supply from gas outlet GSS on transport incubator Technical data Gases: Input pressure at gas outlet: Input pressure of pressure reducer: Output pressure: Output flow (no internal reduction): Housing material: Dimensions: Weight: Maintenance: Max. life: Suitable for use: O 2, AIR, N 2 0 on request 3-6 bar bar = input pressure = input flow Al-alloy, nickel plated mm approx. 400 g maintenance free 10 years in emergency in transport GSS on transport respirator GSS inlet-hose attachment From gas outlet connection: NIST or Afnor From pressure reducer: M12 1 (O 2 ) M20 1 (AIR) GSS-outlet hose attachment To consumer: M15 1 (O 2 ) M17 1 (AIR) GSS automatic gas source switch switches automatically between the gas cylinder supply and wall outlet connection. Preference is always given to the more economic wall outlets. As soon as the gas socket is connected, GSS changes over from the wall cylinder to the gas outlet. It does not change over to the gas cylinder unless the pressure at the wall outlet drops below a preset minimum pressure level. Flow scheme DEVICE WALL OUTLET Hoses Art. Nr. Denomination Hose O 2 white 0,5 m SS/M Hose O 2 white 1,5 m SS/NIST Hose O 2 white 0,5 m SS/M

82 Multistar Block with four flowselectors Flowselectors on block Art. Nr. Denomination Multistar Multistar 4 Technical DAtA Calibration pressure: Flow: Connection: 4.5 bar 0-15 litres/minute/flowmeter Oxygen quick coupling SS Block with five flowselectors 80

83 HOSPITAL CENTRAL GAS SUPPLY SYSTEM

84 medical central Gas supply systems MM40 - HP UNIT SEMIAUTO Manifolds systems are providing the source of the medical gases in hospitals. Main function is reducing pressure from high pressure cylinders to the pressure level which is possible to use in the hospital pipe line. Manifolds have to fulfill the strict requirements of the medical installation standards and of course safety of all patients in the hospital. GCE helps the installers to fulfills ISO 7396 and national installation standards with secure products where testing protocol guarantee great production testing. Our range is covering complete solutions of manifolds installations from high pressure manifolds to stabilizers, all in accordance with European legislation. KeY benefits Very stable outlet pressure irregularity coefficient 20 better than standard 40 m 3 /h is lowest flow Manifold dimensions are minimized Service without interrupt the flow Art. Nr. Denomination Gas Inlet connection Outlet connection MM40 HP unit 2 1 O 2, AIR, N 2 Standard C MM40 HP unit 2 1 N 2 O, CO 2 Standard C MM40 HP unit 2 1 O 2, AIR, N 2 Manual activation C MM40 HP unit 2 1 N 2 O, CO 2 Manual activation C * MM40 HP unit 2 1 O 2, AIR, N 2, N 2 O, CO 2 Standard - Manifold MM40 Semiauto is semi-automatic manifold. It is working on principal different pressure between operation and reserve regulator. By the manual handle operator can decide which side will be operational one and which reserve one. When operating side is empty manifold without any operation action start supply gas from reserve side with lower pressure value and fulfill requests to supply without interrupt the flow. MM40 Semiauto manifolds should be use as second and third source of gas in connection with liquid gas tank. For hospitals without liquid gases is possible use manifold MM40 Semiauto as first and second source and connecting with MM90 Backup will give you final solution for fulfill ISO and national installation standards. Manifolds is supply with Alarm system which increase safety to maximal level and inform hospital personal about each non standard situation. Gas Alarm C44 is Standard Accessory. The gas alarm C44 gives visual and audible indication. it surveillance and sounds the alarm when the following happens: 1. Leaking reserve side High operation pressure 4. Change operation side The gas alarm C44 is able to communicate with other equipment through relays. The alarm has a battery back-up for 30 minutes of operation. Manifold MM40 Semiauto is only first stage of regulation and must be install together with Stabilizer which will stabilize the pressure on final pressure use in hospital gas outlets. GCE medical manifolds are CE marked and fulfill ISO standard. Specification MM40 INCLUDES THE FOLLOWING COMPONENTS: MM40 SEMIAUTO Manifold Gas alarm C44 Purge valves HP filters FOR A COMPLETE MM40 SEMIAUTO MANIFOLD ADD: Collecting pipe set (high pressure valves, and non-return valves /high pressure components/) Cylinder retaining brackets High pressure hoses with safety wire Plug for close collecting pipeline Gas name sign 82

85 Note! Measurements in mm. Technical data Gases: Nominal flow: 40m 3 /h Inlet nominal pressure: Outlet nominal pressure: Inlet connection: Outlet connection: Safety valve pipe dimension: Purge valves connection: Regulatory status: O 2 ; AIR; N 2 ; N 2 O; CO 2 ; (all medical gases) 200 bar 11 bar (setting range bar) W21,8 1/14 M G1/2 M + Soldering piece pipe Ø10, Ø15 OD = 10mm W21,8 1/14 M Complies with Medical directive 93/42/EEC Complies with EN ISO (Central Gas Supply system) Complies with EN (Electric safety) Complies with EN (Electromagnetic compatibility) flow chart of manifold mm40 pressure characteristic 83

86 Hospital Central Gas supply system GAS MANIFOLD MM90 AUTOMATIC The MM90 automatic medical manifold is intended for use in hospital pipeline system as medical gas source. Together with MM90, there shall always be used an alarm providing all alarms according to standard (like Gas alarm C44). As 2 nd stage is recommended to use a stabilizer. The manifolds covered by this description are designed to allow equal numbers of cylinders to be manifold together to give an operating bank and a reserve bank. The manifold will deliver gas from the operating bank to the manifold pressure regulator until the cylinders are exhausted. At that point the supply will switch to the reserve bank and the exhausted bank can be replenished. The object is to give uninterrupted gas supply. Gas Alarm C44 is standard accessory. The Gas alarm C44 gives visual and audible indication. It surveilles and sounds the alarm when the following happens: 1. Change operation side / Leaking on reserve side 2. High operation pressure 3. Low operation pressure The Gas alarm C44 is able to communicate with other equipment through relays. The alarm has a battery back-up for 30 minutes of operation. Art. Nr. Denomination Gas Inlet connection Outlet connection MM90 AUTO Manifold O 2 W 21,8 1/14"M G3/4"F+pipe OD 22 mm MM90 AUTO Manifold AIR W 21,8 1/14"M G3/4"F+pipe OD 22 mm MM90 AUTO Manifold N 2 O W 21,8 1/14"M G3/4"F+pipe OD 22 mm Specification MM90 includes the following components: MM90 AUTO Manifold Gas alarm C44 Purge valves For a complete MM90 AUTO manifold add: Collecting pipe set (high pressure valves, and non-return valves /high pressure components/) Cylinder retaining brackets High pressure hoses with safety wire Plug for close collecting pipeline HP filters Gas name sign Technical data Capacity at 9 bar (900 kpa) outlet pressure: O 2, AIR: 90 m 3 /h N 2 O, CO 2 : 50 m 3 /h Max. inlet pressure (settled): kpa (200 bar) Max. outlet pressure: 1200 kpa (12 bar) Safety + purge valves pipe dimension: OD = 10 mm Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm. 84

87 GAS MANIFOLD MM90 SEMIAUTOMATIC The MM90 semiautomatic medical manifold is intended for use in hospital pipeline system as medical gas source. Together with MM90, there shall always be used an alarm providing all alarms according to standard (like Gas alarm C44). As 2 nd stage is recommended to use a stabilizer. The manifolds covered by this description are designed to allow equal numbers of cylinders to be manifold together to give an operating bank and a reserve bank. The manifold will deliver gas from the operating bank to the manifold pressure regulator until the cylinders are exhausted. At that point the supply will switch to the reserve bank and the exhausted bank can be replenished.the object is to give uninterrupted gas supply. Gas Alarm C44 is standard accessory. The Gas alarm C44 gives visual and audible indication. It surveilles and sounds the alarm when the following happens: 1. Change operation side 2. Leakage on reserve side 3. High operation pressure 4. Low operation pressure. The Gas alarm C44 is able to communicate with other equipment through relays. The alarm has a battery back-up for 30 minutes of operation. Art. Nr. Denomination Gas Inlet connection Outlet connection MM90 SEMIAUTO Manifold O 2 W 21,8 1/14"M G3/4"F+pipe OD 22 mm MM90 SEMIAUTO Manifold AIR W 21,8 1/14"M G3/4"F+pipe OD 22 mm MM90 SEMIAUTO Manifold N 2 O W 21,8 1/14"M G3/4"F+pipe OD 22 mm * MM90 SEMIAUTO Manifold O 2 /AIR W 21,8 1/14"M G3/4"F+pipe OD 22 mm * MM90 SEMIAUTO Manifold N 2 O/CO 2 W 21,8 1/14"M G3/4"F+pipe OD 22 mm *with Gas alarm MC7701, safety valve according to SISHB370 Specification MM90 includes the following components: MM90 SEMIAUTO Manifold Gas alarm C44 Purge valves For a complete MM90 semiauto manifold add: Collecting pipe set (high pressure valves, and non-return valves /high pressure components/) Cylinder retaining brackets High pressure hoses with safety wire Plug for close collecting pipeline HP filters Gas name sign Technical data Capacity at 9 bar (900 kpa) outlet pressure: O 2, AIR: 90 m 3 /h N 2 O, CO 2 : 50 m 3 /h Max. inlet pressure (settled): kpa (200 bar) Max. outlet pressure: 1200 kpa (12 bar) Safety + purge valves pipe dimension: OD = 10 mm Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm. 85

88 GAS MANIFOLD MM90 STANdBY (BACKUP MANIFOLD) The manifold MM90 STANDBY covered by this description is designed to be used as a third source of suppply in medical central gas systems. The manifold will deliver gas when the nominal supply system pressure falls below a set level (7 bar). This is a back up source. Together with MM90 STANDBY, there shall always be used the MM90 AUTO or SEMIAUTO, alarm providing all alarms according to standard (like Gas alarm C44). As 2 nd stage is recommended to use a stabilizer. Standard Accessory Gas Alarm C44 The gas alarm C44 gives visual and audible indication. It surveilles and sounds the alarm when the following happens: Too high outlet pressure, Too low outlet pressure, Empty cylinder The Gas alarm C44 is able to communicate with other equipment through relays. The alarm has a battery back-up for 30 minutes of operation. Art. Nr. Denomination Gas Inlet connection Outlet connection MM90 STANDBY O 2, AIR W 21,8x1/14"M G3/4"F+pipe OD 22 mm MM90 STANDBY N 2 O, CO 2 W 21,8x1/14"M G3/4"F+pipe OD 22 mm Specification MM90 includes the following components: MM90 STANDBY Manifold with pressure switch Purge valves For a complete MM90 STANDBY manifold add: Gas alarm C44 Collecting pipe set (high pressure valves, and non-return valves /high pressure components/) Cylinder retaining brackets High pressure hoses with safety wire Plug for close collecting pipeline HP filters Gas name sign Technical data Capacity at 7 bar (700 kpa) outlet pressure: O 2, AIR : 90 m 3 /h N 2 O, CO 2 : 50 m 3 /h Max. inlet pressure (settled): 200 bar ( kpa) Max. outlet pressure: 12 bar (1200 kpa) Safety + purge valves pipe dimension: OD = 10 mm Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm.

89 Gas Manifold MC80 (duplex) This gas manifold is suitable for the medium to the large sized hospital. The MC 80 has a flow capacity of up to 80 m 3 /h and is conveniently designed in modules. The MC 80 reduces the gas pressure in two steps to a constant operating pressure. Service and tests are to be carried out with no disturbance in the supply of gas to the gas distrubution system. The MC 80 (duplex) consists of the three following units: 1. MC 80 - High Pressure Unit This module contains two regulators with safety valves and it is connected to two various cylinder banks with high pressure hoses. When the cylinder bank which has been connected for operation, has been emptied, the other duty side is automatically connected. 2. MC 80 - Stabilizer The stabilizer makes the operating pressure in the distribution system remain constant. The module contains two regulators with safety valves. Since the gas pressure is reduced in two steps the drop in pressure, when changing from the operating cylinder to the other bank of cylinders, is kept to a minimum. The unit is prepared for connection to a liquid supply tank. 3. MC Digital Pressure Monitor This monitor gives visual and audible indication as well as a message in plain language. It electronically surveilles and sounds the alarm when the following happens: 1. Too high or too low distributing pressure, 2. Too high intermediate pressure, 3. Leakage on the reserve gas cylinder bank, 4. When change of operating side has been effected. When connected to a liquid tank the following disturbances will be reported: 1. Too high or too low operating pressure, 2. Too high or too low intermediate pressure, 3. Leakage from the reserves, 4. When change of operating side has been effected. The MC7701 is able to communication with another equipment through a serial link and/or relays. The alarm has a battery back-up for 30 minutes of operation. Specification MC 80 (duplex) includes the following components: MC 80, High Pressure Unit MC 80, Stabilizer MC 7701, Digital Pressure Monitor Evacuating kits for collecting pipe Shut-off valve for the distribution line HP filters For a complete MC 80 (duplex) STANDBY manifold add: Collecting pipe set (high pressure valves, and non-return valves /high pressure components/) Cylinder retaining brackets High pressure hoses with safety wire Gas name sign Art. Nr. Denomination Gas Inlet connection Outlet connection DUPLEX 2 1 O 2 W 21,8 1/14"M 2 G3/4"F+pipe OD 22 mm DUPLEX 2 1 AIR W 21,8 1/14"M 2 G3/4"F+pipe OD 22 mm DUPLEX 2 1 N 2 O/CO 2 W 21,8 1/14"M 2 G3/4"F+pipe OD 22 mm MC80 HP 2 1 O 2 W 21,8 1/14"M G3/4"F+pipe OD 22 mm MC80 HP 2 1 AIR W 21,8 1/14"M G3/4"F+pipe OD 22 mm MC80 HP 2 1 N 2 O/CO 2 W 21,8 1/14"M G3/4"F+pipe OD 22 mm MC80 STAB O 2 3 G3/4"F+pipe OD 22 mm 2 G3/4"F+pipe OD 22 mm MC80 STAB AIR 3 G3/4"F+pipe OD 22 mm 2 G3/4"F+pipe OD 22 mm MC80 STAB N 2 O/CO 2 3 G3/4"F+pipe OD 22 mm 2 G3/4"F+pipe OD 22 mm 87

90 Technical data Capacity at 600 kpa (6 bar) working pressure: High Pressure Unit MC 80: Stabilizer MC 80: Regulatory status: O 2 : 80 m 3 /h N 2 O : 80 m 3 /h Max. inlet pressure: 200 bar ( kpa) Max outlet pressure: 16 bar (1600 kpa) Safety valves OD = 10 mm Purge valves OD =15 mm Max. inlet pressure: 16 bar (1600 kpa) Max working pressure: 8 bar (800 kpa) Safety valves OD = 15 mm Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm. 88

91 Gas Manifold MC25 The gas cylinder manifold MC 25 is delivered as standard for the gases medical breathing oxygen, nitrous oxide, medical breathing air, medical carbon dioxide, and nitrogen. This manifold has a capacity of 25 m 3 /h and is primarily intended for small and medium-sized hospitals. The gas cylinder pressure is regulated in two steps. The change-over between operating side and reserve side is made automatically without any differences in the operating pressure. Alarm signal comes from the pressure switches to the alarm unit C44. The alarm signals from the alarm unit C44 can be forwarded directly to a monitoring desk. Function control and service can be carried out without interruption in the gas supply. Specification MC 25 includes the following components: Gas manifold MC 25 Gas alarm C44 (exposed mounting) including power supply Evacuating kits for collecting pipe Shut-off valve for distribution line HP filters For a complete MC 80 (duplex) STANDBY manifold add: High pressure collecting pipes, high pressure valves, filters and non-return valves High pressure hoses with safety wire Cylinder retaining brackets Gas name sign Art. Nr. Denomination Gas Inlet connection Outlet connection MC 25 O 2 W 21,8 1/14"M G1/2"F + pipe OD10mm+OD15mm MC 25 AIR W 21,8 1/14"M G1/2"F + pipe OD10mm+OD15mm MC 25 N 2 O, CO 2 W 21,8 1/14"M G1/2"F + pipe OD10mm+OD15mm Technical data Capacity at 5 bar (500 kpa) operation pressure: and pressure drop 0.5 bar (50 kpa): Maximum inlet pressure: Maximum operation pressure: Safety + purge valves pipe dimension: Regulatory status: O 2, AIR, N 2 : 25 m 3 /h N 2 O, CO 2 : 17 m 3 /h 200 bar ( kpa) 10 bar (1000 kpa) OD = 15 mm Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm. 89

92 high pressure Manifold accessories GCE can supply a complete range of high pressure accessories making it possible to install a medical gas supply system. All accessories are designed and manufactured according to the relevant standard for high pressure systems. The high pressure pipe components are manufactured in the following materials: stainless steel AISI 316 L and brass CuZn39Pb3, and they are tested at 360 bar. Cylinder holders for cylinders and connecting pipes are manufactured in AISI 316. COLLECTIOn pipe line Collecting pipe set in prepare for GCE HP manifold units. These sets are increasing inlets points for HP cylinders or bundles. Colecting sets are possible connecting serially therefore select ideal combination. Set containts: High Pressure Valve Non Return Valve Collection Pipe Art. Nr. Denomination cylinder collection pipe set cylinders collection pipe set cylinders collection pipe set cylinder collection pipe set cylinders collection pipe set cylinders collection pipe set cylinder collection pipe set+cylinder holders cylinders collection pipe set+cylinder holders cylinders collection pipe set+cylinder holders High Pressure Hoses Medical high pressure hoses are used to connect cylinders or cylinder bundles to gas supply systems. The high pressure hose is intended to be used with a pressure up to maximum 230 bar. Pressure tested at 345 bar. The hose is equipped with a safety wire. Handling The high pressure hose shall be transported, stored, installed and maintained according to Instruction of Use. Maximum life time from installation 5 years. 90 Art. Nr. Gas Lenght (mm) Inlet connection Outlet connection O W21,8 1/14 RH W21,8 1/14 RH O W21,8 1/14 RH W21,8 1/14 RH N 2 O 1250 R3/8 RH W21,8 1/14 RH N 2 O 2000 R3/8 RH W21,8 1/14 RH AIR 1250 R5/8 RH W21,8 1/14 RH AIR 2000 R5/8 RH W21,8 1/14 RH N 2 /Ar 1250 W24,32 1/14 RH W21,8 1/14 RH N 2 /Ar 2000 W24,32 1/14 RH W21,8 1/14 RH CO W27 2 RH W21,8 1/14 RH CO W27 2 RH W21,8 1/14 RH Technical data - Material Tube: Acid-proof Stainless Steel (AISI 316) Plait: Stainless Steel (AISI 304) Wire: Stainless Steel (AISI 304) Nut and tightening material: Acid-proof Stainless Steel (AISI 316) Case and Oetiker: Stainless Steel (AISI 304) Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Complies with EN ISO (High Pressure Flexible Connection)

93 line regulator The plant regulator reduces the gas pressure from the primary source (cryogenic or automatic central tanks) at an adjustable pressure of 3 to 8 Bar. The accuracy of this pressure has a significant effect on gas flow delivered to the patient. That is why a high capacity for instantaneous flow allows an immediate response to hospital needs, while ensuring perfect network Pressure stability. FEATURES PRESURE REGULATOR Outlet Pressure of 3 to 8 Bar adjustable through the central control pressure. A Safety device control pressure blocks the adjustment control once it is set. PRESSURE CONTROL Includes two gauges for checking inlet and outlet pressure values. The control segments allow easy and immediate reading whether the input and output pressures are correct. CONNECTIONS In case of emergency or power failure in the main network, you can connect to a gas secure network (gas bottle equipped with pressure regulator) through two quick coupler. Complies with AFNOR standard. Security Cut Two valves allows to close the main gas network, if necessary. TECHNICAL DATA Dimensions: Weight: 160 mm 200 mm 80 mm 1,6 kg REGULATOR MATERIAL Body: Flap: Valve + ring: Aluminum Nitrile Brass + nitrile ACCESORIES Gauges: Ø 40 mm (colored segments) Quick Couples: AFNOR standard depending on the gas Inlet pressure: 40 Bar Outlet pressure: 3,5 a 8 Bar Operating temperature: de 20 C a +40 C Nominal flow: 40 Nm 3 /h Connections: Inlet and outlet pipe for 12 mm Welding 91

94 MM40 STABILIZER Manifold MM40 - STABILIZER is secondary gas reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units. MM40 - STABILIZER is only secondary reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MM90, MM40), possibly by the cryogenic tank (LOX). In case of signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a Gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter 4-20 ma, pressure transmitter 0-50 mv or with pressure switches. Gas reduction unit MM40 - STABILIZER must be always installed in compliance with the standards EN ISO , EN and the appropriate national standards. KEY BENEFITS 40 m 3 /h is lowest flow Manifold dimensions are minimized Service without interrupt the flow Inlet for LOX or 3rd source Special outlet for sensors and QC Technical data technical data Gases: O 2 ; N 2 O; Air; Air-800 CO 2 ; N 2 (all medical gases) Nominal flow: 40 m 3 /h Inlet maximal pressure: 16 bar Outlet pressure range: 0,5-10 bar (preset to 4,5 bar) Inlet connection 1: G1/2 M + Soldering piece pipe Ø12 Inlet connection 2: Optional (G1/2 M + Soldering piece pipe Ø12) Outlet connection: G1/2 M + Soldering piece pipe Ø12 Safety valve: Optional (outlet pipe OD = 15mm) Pressure sensors: Optional (Pressure switches; Transmitters 0 50mV; 4 20 ma) Emergency QC inlet: Optional QC by national standards Regulatory status: Complies with Medical directive 93/42/EEC. Complies with EN ISO (Central Gas Supply system). Complies with EN (Electric safety). Complies with EN (Electromagnetic compatibility). BASIC DIMENSIONS Note! Measurements in mm. 92

95 STABILIZER MM7762 FOR O 2, N 2 O, AIR A stabilizer is a pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units. In case of signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a Gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter 4-20 ma, pressure transmitter 0-50 mv or with contact gauge. The stabilizer makes it possible to distribute gas with different pressure to department and buildings in the hospital area. In some cases it is needed to deliver a higher pressure from the main gas manifold to compensate for small pipe dimensions. In those cases the Stabilizer shall be mounted as close as possible before the first terminal unit, to ensure a correct pressure to the patient. Art. Nr. Denomination Inlet connection Outlet connection MM7762 Stabilizer contact gauge 2 G3/4"F+pipe OD 22 mm 2 G3/4"F+pipe OD 22 mm MM7762 Stabilizer 4-20 ma 2 G3/4"F+pipe OD 22 mm 2 G3/4"F+pipe OD 22 mm Technical data Max inlet pressure: 16 bar (1600 kpa) Max operating pressure: 10 bar (1000 kpa) Capacity of 500 kpa (5 bar) operating pressure: 80 m 3 /h Safety valves pipe dimension: OD=15 mm Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) 450 Note! Measurements in mm

96 STABILIZER MC150 FOR O 2, N 2 O, AIR A stabilizer is a pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units. In case of signal for pressure deviation in relation to the alarm settings, the alarm can easily be displayed on a Gas alarm unit. It is also possible to send information to the central operation control. The stabilizer can be delivered with either pressure transmitter 4-20 ma, pressure transmitter 0-50 mv or with contact gauge. The stabilizer makes it possible to distribute gas with different pressure to department and buildings in the hospital area. In some cases it is needed to deliver a higher pressure from the main gas manifold to compensate for small pipe dimensions. In those cases the Stabilizer shall be mounted as close as possible before the first terminal unit, to ensure a correct pressure to the patient. Art. Nr. Denomination Inlet connection Outlet connection MC 150 Stabilizer contact gauge 2 G1 1/2"F+pipe OD 35 mm 2 G1 1/2"F+pipe OD 35 mm MC 150 Stabilizer 4-20 ma 2 G1 1/2"F+pipe OD 35 mm 2 G1 1/2"F+pipe OD 35 mm Technical data Max inlet pressure: 16 bar (1600 kpa) Max operating pressure: 10 bar (1000 kpa) Capacity of 500 kpa (5 bar) operating pressure: 150 m 3 /h Safety valves pipe dimension: OD=35 mm Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Note! Measurements in mm. 94

97 GAS MANIFOLD SIMPLEX MMR The Simplex MMR gas manifold is suitable for such health care where the capacity requirement is limited, such as laboratories and small health care clinics Veterinary etc. This gas manifold consists of only one group of cylinders. The regulator is mounted in the collection unit. Each inlet connection has a filter, a non-return valve and a shut-off valve. This arrangement makes it possible to use one cylinder at a time. In order to obtain a stabile outlet pressure this gas manifold is equipped with a preset two-stage regulator. On the high pressure side of the regulator there is a contact gauge the signal of which can be carried further to an alarm unit. Simplex MMR is delivered mounted and test-pressurized. Specification Simplex MMR iincludes the following components: Gas cylinder manifold Simplex MMR Collecting pipe Manyflow block for three hoses Gas evacuation kits for collecting pipe For a complete Simplex MMR add: Safety valves Gas alarm C44 High pressure hoses with safety wire Cylinder retaining brackets Gas name signs Art. Nr. Denomination Gas Inlet connection Outlet connection Simplex MMR O 2, AIR, N 2, Ar, N 2 O, CO 2 W 21,8 1/14"M G3/8"M Technical data Capacity at working pressure 5 bar: Max. inlet pressure: Max. outlet pressure: Regulatory status: O 2, AIR : 30 m 3 /h N 2 O, CO 2 : 25 m 3 /h 200 bar (20000 kpa) 5 bar (500 kpa) Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) 340 Note! Measurements in mm

98 Medical Shut off VALVEs GCE max. 40 bar L H To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system. The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping and they are provided with name labels in Swedish, Norwegian, Danish, Finnish, and Hungarian for each gas type. Before delivery each valve is individually leak tested. The ball is sealed with washer of PTFE. The stem is sealed with two silicon O-rings and PTFE on washer. The housing valves are sealed with an EPDM quality O-ring. Shut-off valve incl 2 pcs washer Art. Nr. Conn. thread Valve L (mm) H(mm) ISO-G 1/2 DN ISO-G 3/4 DN ISO-G 1 DN ISO-G 1 1/4 DN ISO-G 1 1/2 DN ISO-G 2 DN connection parts (2 connection nuts and 2 connectione piecs) Art. Nr. Material Valve A/B* mm Red brass SS 5204 DN / 15* Red brass SS 5204 DN Red brass SS 5204 DN / 22* Red brass SS 5204 DN Red brass SS 5204 DN / 28 * Red brass SS 5204 DN / 35 * Red brass SS 5204 DN Red brass SS 5204 DN 32 35/42 * P Red brass SS 5204 DN connection parts (soldering adapter dn40-dn50) Art. Nr. Material Valve A/B mm Red brass SS 5204 DN 50 48/54 Order both DN 40 and DN 50 for union enlargement. Shut-off valves for oxygen, air for breathing, nitrous oxide and all other medical gases. The shut-off valves are of the ball type with a straight cylindrical bore. Easy to operate - 90 turn between fully open and fully closed. No maintenance - the ball valve does not need services, when necessary the whole valve is exchanged. Unions for brazing and flat sealing connections. Reliable, easy to fit. Spare parts Art. Nr. Denomination Valve Thread P Labelsheet DN 10, 15, 25, 32, P Washer, 1 pce DN P Washer, 10 pcs DN P Washer, 1 pce DN P Washer, 10 pcs DN P O-ring, EPDM, 5 pcs DN P O-ring, EPDM, 5 pcs DN Connection nut, 2 pcs DN 10 ISO-G 1/ Connection nut, 2 pcs DN 15 ISO-G 3/ P Connection nut, 2 pcs DN 20 ISO-G Connection nut, 2 pcs DN 25 ISO-G 1 1/ P Connection nut, 1 pce DN 40 ISO-G 2 Technical data Material valve housing: Ball: Stem: Max working pressure: Tighten proof: Regulatory status: Nickel plated brass Chrome plated brass Nickel plated brass 33 bar (3300 kpa) 50 bar (5000 kpa) Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) 96

99 Non Return VALVE The non return valve unit is intended for use in medical central gas systems to secure that gas doesn t flow back from the equipment and pipes through the central gas system. This is very important for example when technical air is taken from medical air pipes for use in laboratories. The non return valve unit consists of a non return valve (NRV) with flow direction arrow, lockable medical shut off valves, soldering pieces, nuts and a gasspecific medical quick coupling (QC) for medical breathing air. This design makes the NRV very easy to test. The QC can also be used for checking the pressure, doing leak tests and take gas samples. The NRV unit can also be delivered with QC for instrumental air. Contact the manufacturer for more information. Non return valve unit Art. Nr. Denomination Total Length Non return valve unit medical breathing air DN mm Non return valve unit medical breathing air DN mm Non return valve unit medical breathing air DN mm Sealing between non return valve and connecting piece Art.Nr. Denomination P DN15 O-ring, 10 pcs P DN25 Sealing, 10 pcs P DN40 O-ring, 10 pcs Technical data Opening pressure: Pressure class: Regulatory status: 0.06 bar (6 kpa) PN16 Degreesing for Oxygen use no CE-marking 97

100 Emergency Shut-Off VALVE Box DN15 For safety and service reasons a central gas system must be equipped with shut-off valves placed so that the gas supply can easily be interrupted. The valves are mounted in a box. The emergency shut-off valve boxes shall be placed so that the gas can be shut off section wise. This means that the boxes should be placed before each ward, operating unit, part of ward for critical treatment and individual surgeries. The emergency shut-off valve box is delivered with connection tubes and each box has been test pressurized and controlled for tightness. The emergency shut-off valve has large ergonomical handles. If mounted in a recessed way, the emergency shut-off valve box fits walls with 70 mm beam. With a 90 mm beam there is extra space (23,5 mm) behind the valve box usable for e.g. fire isolation. All models, also with four or five gases, fit between the beams in a CC-60 wall. The box is gas-tight which prevents gas accumulation inside the wall. The product is CE-marked according to EN ISO and current SIS HB 370. It is important that the boxes are placed so that they are easily available for authorized personnel. The front door shall be sealed. In order to avoid mistakes the boxes shall be clearly and distinctly marked with gas sort. A sign showing which section the box serves must be placed in its immediate vicinity. The valves are open when the handles are in vertical position in line with the printed marking on the plate. Shut-off valve box DN15 Art. Nr. Type Inlet pipe Outlet pipe valve DN 15 ø 15 ø valves DN 15 ø 15 ø valves DN 15 ø 15 ø valves DN 15 ø 15 ø valves DN 15 ø 15 ø VALVE BOX FROM ABOVE EXPOSED MOUNTING SEEN FROM SIDE RECESSED MOUNTING SEEN FROM SIDE 4-5 VALVE BOX FOM ABOVE Note! Measurements in mm. 98

101 Emergency Shut-Off VALVE Box DN20 Shut-off valve box DN20 Art. Nr. Type Inlet pipe Outlet pipe valves DN 20 ø 22 ø valves DN 20 ø 22 ø 22 Technical data Gases: Number of gases: Working pressure: Tube dimension: Material: Weight: Regulatory status: O 2 ; N 2 O; AIR;AIR-800(I-AIR); CO 2 ; N 2 ; VAC (all medical gases) (ø15 1) 1 to 5 valves (DN15) (ø22 1) 1 to 3 valves (DN20) 10 bar ø15 1 mm; ø22 1 mm Brass; Copper 4-15 kg Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) and current SIS HB 370. EXPOSED MOUNTING SEEN FROM SIDE 2-3 VALVE BOX FROM ABOVE RECESSED MOUNTING SEEN FROM SIDE Note! Measurements in mm. 99

102 Pressure watch with gauge, alarm and quick coupling DN15 The Pressure Watch has the same shut off function as an ordinary Emergency Shut-Off Valve Box. Behind the plexiglass you find quick couplings that are used to connect spare cylinders and gauges. To inform the hospital staff regarding gas failures the Pressure Watch is equipped with sensors for one of the following alarm systems; 1) pressure switches that you connect to Gas alarm C44, 2) pressure transmitters that you connect to Gasalarm MC7701 or 3) pressure transmitters 4-20 ma that you connect directly to the hospital central computer system. Alarm system 1 is the most commonly used. The Pressure Watch is delivered with 300 mm connection tubes and each box has been test pressurized and controlled for tightness. The Pressure Watch has large ergonomical handles. If mounted in a recessed way, the emergency shut-off valve box fits walls with 70 mm beam. With a 90 mm beam there is extra space (23,5 mm) behind the valve box usable for e.g. fire isolation. All models, also with four or five gases, fit between the beams in a CC-60 wall. The box is gas-tight which prevents gas accumulation inside the wall. The product is CE-marked according to EN ISO and present SIS HB 370. It is important that the boxes are placed so that they are easily available for authorized personnel. The front door shall be sealed. In order to avoid mistakes the boxes shall be clearly and distinctly marked with gas sort. A sign showing which section the box serves must be placed in its immediate vicinity. The valves are open when the handles are in vertical position in line with the printed marking on the plate. To close the valves you turn the handle 90 degrees clockwise. pressure watch dn15 with pressure switches Art. Nr. No. of valves Gas Inlet/Outlet pipe mm DN O 2 ø O 2, Air ø O 2, N 2 O, Air ø O 2, Air, VAC ø O 2, N 2 O, Air, Air- 800 ø O 2,N 2 O, Air, VAC ø O 2, N 2 O, Air, Air-800, CO 2 ø15 pressure watch dn15 With transmitter 4-20 ma Art. Nr. No. of valves Gas Inlet/Outlet pipe mm DN O 2 ø O 2, Air ø O 2, N 2 O, Air ø O 2, Air, VAC red ø O 2, N 2 O, Air, Air ø O 2, N 2 O, Air, Air - 800, CO 2 ø VALVE BOX FROM ABOVE EXPOSED MOUNTING SEEN FROM SIDE RECESSED MOUNTING SEEN FROM SIDE 4-5 VALVE BOX FOM ABOVE Note! Measurements in mm. 100

103 Pressure watch with gauge, alarm and quick coupling DN20 pressure watch dn20 with pressure switches Art. Nr. No. of valves Gas Inlet/Outlet pipe mm O 2, AIR ø O 2, N 2 O, AIR ø O 2, AIR, AIR-800 ø O 2, AIR, VAC red ø22 PRESSURE WATCH DN20 With transmitter 4-20 ma Art. Nr. No. of valves Gas Inlet/Outlet pipe mm O 2, AIR ø O 2, N 2 O, AIR ø O 2, AIR, AIR-800 ø O 2, AIR, VAC red ø22 pressure watch DN20 emergency source with pressure switches Art. Nr. No. of valves Gas Inlet/Outlet pipe mm O 2, AIR ø O 2, N 2 O, AIR ø O 2, AIR, AIR-800 ø O 2, AIR, VAC red ø22 pressure watch DN20 emergency source with transmitter 4-20 ma Art. Nr. No. of valves Gas Inlet/Outlet pipe mm O 2, AIR ø O 2, N 2 O, AIR ø O 2, AIR, AIR-800 ø O 2, AIR, VAC red ø22 Technical data Gases: Number of gases: Working pressure: Tube dimension: Emergency QC inlets: Pressure gauges: Pressure sensors: Material: Weight: Regulatory status: O 2 ; N 2 O; AIR; AIR-800 (I-AIR); CO 2 ; N 2 ; VAC (all medical gases) (ø15 1) 1 to 5 valves (DN15); (ø22 1) 1 to 3 valves (DN20) 10 bar (PN16) ø15 1 mm; ø22 1 mm QC by national standards 0-16 bar Pressure switches; Transmitters 0-50 mv (special order); 4-20 ma Brass; Copper 4-15 kg Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) and current SIS HB VALVE BOX FOM ABOVE EXPOSED MOUNTING WITHOUT EMERGENCY SOURCE SEEN FROM SIDE Note! Measurements in mm. RECESSED MOUNTING WITH EMERGENCY SOURCE SEEN FROM SIDE 101

104 Pressure monitor DN15 The pressure monitor makes sure that the lower operating pressure for nitrous oxide compared to oxygen is kept. When the spare supply is used to keep the gas division going, the pressure monitor will supervise the operating pressures to make sure that these are within the established standards. Furthermore, an optic and acoustic signal to a manned area will be obtained. The pressure monitor is equipped with a digital pressure reading unit (MC 7701). The surveillance is done by pressure transmitters. The following gases are under surveillance: breathing oxygen, nitrous oxide, and instrument air. Alarm is indicated by an acoustic and and visual signal at the same time as the exact cause of the alarm is written on the display. This happens if the gas pressure rises above or sinks below the set maximum or minimum limits respectively. The pressure monitor is also equipped with bayonet coupling for breathing oxygen, nitrous oxide, breathing air, and instrument air. When necessary, it is possible to connect spare gas to these. Art. Nr. Denomination Inlet pipe Outlel pipe ES pipe For 2 gases O 2, Air ø15 ø For 3 gases O 2, N 2 O, Air ø15 ø For 4 gases O 2, N 2 O, Air, Air-800 ø15 ø For 2 gases O 2, Air with ES ø15 ø15 ø For 3 gases O 2, N 2 O, Air with ES ø15 ø15 ø For 4 gases O 2, N 2 O, Air, Air-800 with ES ø15 ø15 ø15 Technical data Capacity emergency supply at 500 kpa (5 bar): and pressure drop 0,5 bar: Capacity normal supply at 500 kpa (5 bar): and pressure drop 0,5 bar: Max. inlet pressure: Group regulator capacity at inlet pressure 3 bar: Mounting measurements (outside dimensions): DN15 Pressure monitor: Regulatory status: approx 380 l/min approx 780 l/min 1000 kpa (10 bar) 150 l/min Width 549 mm Height 633 mm Depth 128 mm Width 555 mm Height 689 mm Mounting depth max 138 mm Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) Pressure drop test. Inlet pressure 5 bar Pressure drop test. Inlet pressure 5 bar. Emergency QC inlets. 102

105 GAS ALARM C44 SYSTEM Gas Alarm C44 is a gas pressure alarm intended for small gas manifolds, stabilizers and for example pressure gauges/pressure switches connected directly to the main line. The C44 is a microprocessor based alarm for 4 alarm channels and is connected to the pressure sensing device with volt free contacts, for example pressure gauges or pressure switches. Alarm C44 is voltage fed with 12 VAC. Supply voltage is fed by the enclosed transformer. Visible from the front is an integrated push button TEST/MUTE. If there is no alarm condition, all the light emitting diodes and the buzzer can be tested when the button is pushed. Should there be an alarm condition, the signal will be suppressed for 15 minutes. If an alarm has been silenced and a new one occurs, the MUTE function is cleared and the signal comes back until the cause has been attended to and the MUTE button is pushed again. Alarm C44 is equipped with an environmental-friendly rechargeable NiMH back-up battery. The sound volume is adjustable via a potentiometer placed behind the cover. At delivery the sound volume is set at Medium. Art. Nr. Denomination P Gas alarm C44 recessed mounting P Gas alarm C44 exposed mounting 1 sheet plastic strips for inserting will be delivered with the Alarm C44. Cut out the plastic strips, loosen the cover lid and insert the respective plastic strip into the correct pocket. Please note: All electronics is subjected to static electricity. Therefore, when working with Alarm C44 grounded wristbands should be used. Technical data Transformer: ~ 11,5V, 0.9 A Battery Pack: 9 V Power Consumption: about 300 ma Weight: 1 kg Working temperature: 0-60 ºC Relay outputs: 4 Relay supply voltage: 4 V Breaking current: 1A, 30 W Dimension exposed mounting L H D: Dimension recessed mounting L H D: Recommended cable: Signal cable 0.25 mm 2 Feed cable 0.75 mm 2 Maximum cable lenght: 3 m (alarm-pressure switchs) Regulatory status: Complies with Medical Devices Directive 93/42/EEC Complies with EN ISO (Central Gas Supply System) EMC tested in accordance EN (Emission and immunity) Exposed mounting Recessed mounting Note! Measurements in mm. 103

106 GAS ALARM MC7701 This monitor gives visual and audible indications as well as status messages in plain language. When used with a manifold, the follows conditions are surveilled. 1. Too high or too low operating pressure, 2. Too high distribution pressure, 3. Leakage on the non-operating gas cylinder bank, 4. When change of operating side has been effected. When connected to a liquid tank the following disturbances will be reported: 1. Too high or too low operating pressure, 2. Too high or too low distribution pressure, 3. Leakage on the non operating gas cylinder bank. 4. When change of operating side has been effected. When used with a pressure watch the following conditions are surveilled: Too high or too low operating pressure. The MC7701 is able to communication wtih another equipment through a serial link RS485, Modbus RTO and/or relays. The alarm has a battery back-up for 30 minutes of operation. Art. Nr P Denomination Digital pressure monitor MC7701 UNILARM accessories P Cable with Hirsman contact 3m P Cable with cable conecting piece 3 m Backup batteries MC P Pressure Transmitter 0-50 mv G1/ bar P Pressure Transmitter 0-50 mv G1/ bar P Pressure Transmitter 0-50 mv G1/ bar Technical data Transformer: ~ 24V, 1.3 A Battery Pack NiMH: 10,8 V Power Consumption: 15 W Enclosure: IP65 Weight: 2kg Working temperature: 0-60 ºC Relay outputs: 14st Serial communication: Modbus RTU Dimension L H D: Dim. including fastening plate L H D: Display languages: Swedish, Norwegian, Danish, Finnish, English and Hungarian Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System) EMC tested in accordance EN (Emission and immunity) Note! Measurements in mm. 104

107 Gas alarm G4 The Gas Alarm G4 is a medical gas alarm that can be connected to pressure monitors with a digital gas pressure monitor MC If MC 7701 alarms the same alarm will be shown at G4. The Gas Alarm G4 can display alarms for four different gases, medical oxygen, medical N2O, medical air and instrumental air. The alarms are summation alarms for both high and low pressure.ln addition to this, a failure in the computer communication system, or a damaged signal cable (for example: cut off ) are also indicated. The loudness of the sound can be adjusted by using the potentionmeter placed behind the covering lid. At delivery the sound is set at medium. The Gas Alarm G4 is available in two diff erent designs, for recessed mounting and for exposed mounting.the display can show any of eight languages chosen from stickers enclosed. The alarm is equipped with a rechargeable battery in case of power failure. Gas Alarm G4 can only be used together with MC At the most 10 pcs of G4 can be connected in a series. Art. Nr. Denomination Gas alarm G4 recessed mounting Gas alarm G4 exposed mounting Technical data Battery: 9 V Weight: 1 kg Working temperature: 0-60 C Power supply: From MC 7701 Recommended cable: Signal cable 0.75 mm 2 Computer wire like Alpha type 5472C or similar Maximum cable lenght: 400 m (between two G4) Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Central Gas Supply System). EMC-tested according to EN (Emission and immunitet). Exposed mounting Recessed mounting Note! Measurements in mm. Connection DiagrAM MC7701 Alternative 1 (MC7701) 32=1 - signal 33= V 34=4 - GND Alternative 2 (MC6701) 39=1 41=3 42=4 105

108 medical terminal units GCE mediunit-din TYPE medical terminal units Medical terminal units are providing quick and easy connecting of hospital ward gas equipment to the hospital gas source. Type of medical gas outlets are decided by the national standards in each country and sometimes local requests in each hospital. GCE helps to the installers to comply with ISO 7396 and national installation standards with secure products where every product is fully tested in production. Our Medical gas outlets are in accordance with ISO EN international standard. Recessed version Exposed version KEY BENEFITS Housing part in the wall is compatible for all GCE MediUnit by standards like DIN, BSI, SS, CZ After 10 years life time upgrade by special pack without request for construction work Small size All functional component from brass Safety parking position Simple installation Easy to clean Fast connecting and disconnecting of hospital ward equipment to gas source Attractive design Recessed, Exposed and Bed head installation versions Complies with color coding and description by standard In accordance with ISO Safety product, every piece is fully tested in production 106

109 GCE mediunit - din Technical DAtA Gases: Dimensions: Height Width Depth Weight: Working pressure: Regulatory status: O 2 ; N 2 O; AIR; CO 2 ; VAC 73 mm 73 mm 63 mm 0,36 kg 4-5 bar Complies with Medical directive 93/42/EEC Complies with EN ISO (Central Gas Supply system) Complies with EN ISO (Terminal units) Complies with DIN (DIN gas specific connections) Art. Nr. Description Gas Inlet TU DIN - recessed O 2 pipe Ø TU DIN - recessed AIR pipe Ø TU DIN - recessed VAC pipe Ø TU DIN - recessed N 2 O pipe Ø TU DIN - recessed CO 2 pipe Ø TU DIN - exposed O 2 pipe Ø TU DIN - exposed AIR pipe Ø TU DIN - exposed VAC pipe Ø TU DIN - exposed N 2 O pipe Ø TU DIN - exposed CO 2 pipe Ø10 installation tools MP_00345 QC installation key MP_00324 Button remover Installation plug (10 pcs) Installation plug mounting Gas specific connection Probe - Terminal unit Colour coding marking on terminal unit First position like on the picture is parking position Parking position is only holding Probe Parking position is without connection to the gas supply Push probe to working position like on the picture In working position Probe is connected to the gas supply Pressure drop is in accordance with EN For disconnection Probe push and hold the button When button is hold Probe is locked in parking position and depressurize Then release the button Probe staying in parking position Depressurize Probe you can safety pull out from terminal unit 107

110 Gas Outlet MC70 (terminal unit) GCE gas outlets type MC 70 generation are self-sealing, i.e. they close automatically when a connected apparatus is removed. The gas outlets are furnished with a quick connection valve which means that the desired apparatus can be connected or disconnected by means of a simple one-step motion. The MC 70 gas outlets may be recessed in the wall or mounted in a panel. All MC 70 gas outlets have the same design but different colour codings and labels for different gases and of course gas specific non-interchangeable quick connection valves. Special efforts have been made to make the maintenance of the gas outlets as easy as possible. No special tools Maintenance valve of ball-type Few components Furthermore the MC 70 are made according to standard SS EN for quick connections and international standard SS EN ISO for terminal units. This means that the gas components are non-interchangeable in every maintenance connection point. The gas outlet is delivered with separate packages for quick connection valve, valvebody, plastic cover with name plate, push-release plate etc. To make installation easier, the valve body has a tightening plug mounted for convenient pressure testing. All necessary mounting details such as brackets, screws etc. are included in the packages. Detailed instructions are also part of the delivery. When mounting the gas outlet in a recessed way the gas outlet can be mounted either in the front wall or in the rear wall, depending on which is first set up. Recessed and exposed instalation set is necessary orded separately. Gas outlet Art. Nr. Denomination Label denomination Compl. for O 2 O 2 - white Compl. for N 2 O N 2 O - blue Compl. for AIR AIR - black/white Compl. for VAC VAC - yellow Compl. for AGSS AGSS - purple Compl. for AIR-800 (I-AIR) AIR black/white Compl. for N 2 N 2 - black Compl. for CO 2 CO 2 - grey For recessed mounting add Art. Nr. Denomination Recessed installation set For exposed mounting add Art. Nr. Denomination Exposed installation set Technical data Maximum working pressure: 10 bar Tube dimension: diameter 8 mm Pressure class: PN 16 Regulatory status: Complies with Medical Devices Directive 93/42/EEC. Complies with EN ISO (Terminal units standard) Complies with EN ISO (Terminal units AGSS) Complies with SS EN (Type standard) labels M70 Art. Nr A A A A A A A A A A A26810 Denomination Circular Label O 2 White 85/55 TU SS Circular Label N 2 O Blue 85/55 TU SS Circular Label AIR Black/White 85/55 TU SS Circular Labe AIR-800 (I-AIR) Black/White 85/55 TU SS Circular Label VAC Red 85/55 TU SS Circular Label VAC Yellow 85/55 TU SS Circular Label GASUTLOPP Blue/Brown 85/55 TU SS Circular Label GASUDLØB Blue/Brown 85/55 TU SS Circular Label GASSUTLØP Blue/Brown 85/55 TU SS Circular Label KAASUJEN POISTO Blue/Brown 85/55 TU SS Circular Label AGSS Purple 85/55 TU SS 108

111 ACCEssories and Others Safety VALVE medical pipeline systems The safety valve is used in medical pipeline systems to secure that the pressure does not exceed 6,8 bar. The safety valve shall be mounted on outgoing pipelines on Simplex MMR or can be mounted on other pipelines. Bracket for wall mounting Safety Valve Tube Mounting Art. Nr. Gas Relief Inlet connection Outlet connection Pressure Medical gases and air 6,8 bar G 3/4 F G 3/4 F Safety valve Simplex MMR Mounting Art. Nr. Gas Relief Inlet connection Outlet connection Pressure Medical gases and air 6,8 bar G 3/8 F G 3/4 F Technical data Evacutaion flow: 130 m 3 /h Evacutaion outlet pipe: Ø 15 mm Relief pressure: 6,8 bar Material: Brass, copper, stainless steel, rubber Pressure class: PN16 Regulatory status: Degreesing for Oxygen use no CE-marking 109

112 Pressure Transmitter Measurements Connection Small compact pressure transmitter with god performance. Suitable for mobile applications when vibration reliable sensors are needed. Compact connectors. Max. deviation 1,0% For relative pressure Pressure range from 0...0,25 bar to bar Degreased for Oxygen Art. Nr. Denomination Pressure Thread Cable P Pressure transmitter 0-16 bar G1/4 1 m P Pressure transmitter 0-25 bar G1/4 1 m P Pressure transmitter bar G1/4 1 m Technical data Performance: Pressure range 16 bar Piezoresistive sensor Pressure range 25 bar hin film-sensor Max. deviation: 1,0% of end value according to DIN ,5% BFSL) Liniarity and hysteresis: Included in above Repeat accurasy: ±0,05% of end value Long term: ±0,2% of end value per annum Overpressure sensitivity: 16 bar 3,5 ; 600 bar 2 ; >600 bar 1,5 Underpressure sensitivity: Insensitive for vacuum Response time: 1 ms for 10-90% of range Pressure connection: G1/4 External thread Sensor body: Acid-proof stainless steel SIS2350 Parts in connection: with the medium: Acid-proof stainless steel SIS2350 Mediun temperature: -30 C till +100 C Surrounding temperature: -30 C till +85 C Temperature deviation: ±0,3% of measure range/10k for zero and measure range Temp.compensated range: 0 C till +80 C Signal alternative: 4-20 ma, 0-10V Supply Voltage: Signal 4-20 ma 10-30V DC Signal 0-10V 14-30V DC Max. permitted load for: RA[Ω]=UB[V]-10V signal 4-20 ma 0,02A Max. permitted load for: RA>10kΩ signal 0-10V Elektrcal connection: Contact Hirschmann-Mini G4a1MMT Polarity reversal safe, short circuit and overload protected Adjustability: Not adjustable Protective class: IP65 acc. to EN 60529/IEC529 EMC-data: Emmision EN Immunity EN Weight: 0,10 kg 2-wire ma 3-wire V DC Supply voltage UB+ 1 1 Supply voltage OV- 2 2 Signal S+ 3 Signal S

113 HIGH PRESSURE components GCE can supply a wide range of components making it possible to install a medical gas supply system. All components are designed and manufactured according to the relevant standard for high pressure systems. The high pressure pipe components are manufactured in the following materials: stainless steel AISI 316 L and brass CuZn39Pb3, and they are tested at 360 bar. Retaining brackets for cylinders and connecting pipes are manufactured in AISI 306. Connecting pipes for cylinder manifolds Connecting pipes with retaining brackets of stainless steel, for 1-4 cylinders. Art. Nr. Connecting threads Length (mm) Number of cylinders W 21,8 1/14"RH EXT-INT W 21,8 1/14"RH EXT-INT W 21,8 1/14"RH EXT-INT Cylinder retaining brackets Cylinder retaining brackets, completely made of stainless steel, for 1 or 2 cylinders. Art. Nr. Length (mm) Number of cylinders P P Connection pipes for cylinder pack manifolds Art. Nr. Connecting threads Length (mm) Number of cylinders W 21,8 1/14"RH EXT-INT W 21,8 1/14"RH EXT-INT W 21,8 1/14"RH EXT-INT Extension pipes Art. Nr. Connecting threads Length (mm) W 21,8 1/14"RH EXT-INT

114 Connecting components for cylinder manifolds Art. Nr. Description Thread Position Connection pipe 90 o W 21,8 1/ Blind plug W 21,8 1/ Adaptor W 21,8 1/14 male LH/ female RH P Coupling nut W 21,8 1/14 LH/RH End plug with nut W 21,8 1/ T-pipe for DUPLEX W 21,8 1/ S-pipe W21,8 1/ Aluminium washer 50 pcs 16/ mm P Copper washers 10 pcs 18/12,7 1.5 mm Non-return VALVEs for connection pipes Art. Nr. Denomination Non-return valve for connection pipes High pressure filter Art. Nr. Denomination High pressure filter HIGH PRESSURE VALVES 300 bar Art. Nr. Inlet Outlet W 21,8 1/14"RH W 21,8 1/14"LH HIGH PRESSURE VALVES 200 bar Art. Nr. Inlet Outlet W 21,8 1/14"RH W 21,8 1/14"LH 112

115 REGULATORS AND FLOW METERS FOR MEDICAL GASES IMPORTANT INFORMATION AND RECOMMENDATIONS Our products are reliable and accurate instruments made in compliance with strict international standards and, if used and maintained according to the instructions provided in the information leaflet, they require no special servicing and repairs, except the following: 1. Replacement of a gasket on the inlet connection - to be performed every six to eight months by the user. Use only gaskets supplied by the manufacturer or supplier of the regulator as they are made of a special non-combustible material. 2. Functional and performance check of the product - to be performed once a year by the manufacturer or by an authorized servicing company. 3. Product inspection - to be performed every five to six years after the manufacturing date by the manufacturer or by an authorized servicing company. The inspection consists in a replacement of rubber parts of the product and its functional check. 4. Repairs - in case of any defects or damage the product shall be delivered to the manufacturer or to an authorized servicing company to be professionally repaired. The maximum service life of the regulator is ten years from the manufacturing date. The manufacturing date is marked on each product as a part of the serial number. Example for products made by the beginning of 1999: Serial number year manufacture ordinal number month of manufacture - January Example for products made during 2000: Serial number year manufacture ordinal number month of manufacture - June SAFETY INSTRUCTIONS The objective of the company GCE is not only customer satisfaction with reliable products but also safe operation of all equipment associated with medicinal gases. Therefore is it necessary to observe all instructions for the use and, particularly, the following safety principles: 1. Concentrated oxygen shall not come into contact with oils, grease and impurities to prevent its self-ignition. 2. Pressure cylinders shall be always secured against fall, exposure to heat and manipulation by unauthorized person. 3. Smoking and open fire manipulations are strictly prohibited in the proximity of pressure cylinders or gas equipment. 4. Personnel working with classified gas equipment shall be properly trained. 5. Any servicing of regulators, flow meters, combined valves and concentrators shall be requested only from specialist servicing organizations. CERTIFICATION GCE has introduced and certified its quality management system according to IS013485:2003 for medical devices. The products meet the requirements of the EU Directive 93/42/EEA and they are certified and provided with the CE mark. Any requirements for other technical parameters shall be discussed with the manufacturer. 113

116 CERTIFICATES DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificate No AQ-CZS-NA DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificate No AQ-CZS-NA This is to certify that the Management System of: GCE Holding AB This is to certify that the Management System of: GCE Holding AB Källvattengatan, SE , Malmö, Sweden Källvattengatan 9, SE , Malmö, Sweden has been found to conform to the standard: ISO 9001:2008 This Certificate is valid for the following product or service ranges: has been found to conform to the standard: ISO 13485:2003 This Certificate is valid for the following product or service ranges: Design, production, sales and servicing of equipment for using of technical gases in industry. Pressure regulators, closing, combined and special valves, cutting, welding, heating and brazing torches, safety equipment, speciality torches, fittings, accessories for industrial purposes. Design, production, sales and servicing of medical devices for using of medical gases in health service. Pressure regulators, terminal units, suction equipment, medical hoses, cylinder and combi valves and flow meters for medical gases. Initial Certification date: 28 February 1997 This Certificate is valid until: 28 February 2015 Place and date: Høvik, 28 February 2012 for the Accredited Unit: DET NORSKE VERITAS CERTIFICATION AS, NORWAY Initial Certification date: 28 February 1997 This Certificate is valid until: 28 February 2015 Place and date: Høvik, 28 February 2012 for the Accredited Unit: DET NORSKE VERITAS CERTIFICATION AS, NORWAY The audit has been performed under the supervision of Evangelos Tavandžis Lead Auditor MSYS 002 Bjørg Synnøve Nesgård Management Representative The audit has been performed under the supervision of Evangelos Tavandžis Lead Auditor MSYS 002 Bjørg Synnøve Nesgård Management Representative Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. This Certificate has been digitally signed. See for more info HEAD OFFICE. Det Norske Veritas AS, Veritasveien 1, 1322 Hovik, Norway. Tel: Fax: Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. This Certificate has been digitally signed. See for more info HEAD OFFICE. Det Norske Veritas AS, Veritasveien 1, 1322 Hovik, Norway. Tel: Fax:

117 General business terms and conditions Preamble 1. These General Conditions shall apply when the parties agree in writing or otherwise thereto. Deviations from the Conditions shall not apply unless agreed in writing. When used in these conditions the term written or in writing refers to a document signed by both parties or a letter, fax, electronic mail or other means agreed by the parties. Product Information 2. Data in product information and price lists are binding only to the extent that they are expressly referred to in the contract. Technical Documents and Technical Information 3. All drawings and other technical documents regarding the goods or their manufacture submitted by one party to the other, prior or subsequent to the formation of the contract, shall remain the property of the submitting party. Drawings, technical documents or other technical information received by one party shall not, without the consent of the other party, be used for any other purpose than that for which they were submitted. They may not without the consent of the other party be copied, reproduced, transmitted or otherwise communicated to a third party. 4. The Seller shall, not later than by delivery of the goods, free of charge provide the Buyer with one copy, or the larger number of copies that may have been agreed, of drawings and other technical documents, which are sufficiently detailed to permit the Buyer to carry out installation, commissioning, operation and maintenance (including running repairs) of all parts of the goods. The Seller shall not, however, be obliged to supply manufacturing drawings of the goods or spare parts. Delivery Test 5. Where a delivery test has been agreed, it shall, unless otherwise agreed, be carried out where the goods are manufactured. If technical requirements for the test have not been agreed, the test shall be carried out in accordance with general practice in the industry concerned in the country where the goods are manufactured. 6. The Seller shall notify the Buyer in writing of the delivery test in sufficient time to permit the Buyer to be present at the test. If the Buyer has received such notice, the test may be carried out even if the Buyer is not represented at the test. The Seller shall record the test. The test report shall be sent to the Buyer. The report shall, unless otherwise shown by the Buyer, be considered to correctly describe the execution of the test and its results. 7. If at the delivery test the goods are found not to be in accordance with the contract, the Seller shall as soon as possible ensure that the goods comply with the contract. If so required by the Buyer a new test shall thereafter be carried out. The Buyer may not, however, require a new test if the defect was insignificant. 8. If no other division of the costs has been agreed, the Seller shall bear all costs for delivery tests carried out where the goods are manufactured. The Buyer shall, however, at such delivery tests bear all costs for his representatives, including costs for travel and subsistence. Delivery 9. Where a trade term has been agreed, it shall be interpreted in accordance with the INCOTERMS in force at the formation of the contract. If no trade term is specifically agreed, the delivery shall be Ex Works. Time for Delivery. Delay 10. If, instead of a fixed date for delivery, the parties have agreed on a period of time within which delivery shall take place, such period shall start to run at the formation of the contract. 11. If the Seller finds that he will not be able to deliver the goods at the agreed time or if delay on his part seems likely, he shall without undue delay notify the Buyer thereof in writing, stating the reason for the delay and if possible the time when delivery can be expected. If the Seller fails to give such notice, he shall, regardless of the provisions of Clauses 13 and 14, reimburse the Buyer for any additional expenses, which the latter incurs and which he would have avoided, had he received notice in time. 12. If delay in delivery is caused by a circumstance which under Clause 36 constitutes ground for relief or by an act or omission on the part of the Buyer, including suspension by the Seller under Clause 18, the time for delivery shall be extended by a period, which is reasonable having regard to the circumstances in the case. The time for delivery shall be extended even if the reason for delay occurs after the originally agreed time for delivery. 13. If the Seller fails to deliver the goods on time, the Buyer is entitled to liquidated damages from the date on which delivery should have taken place. The liquidated damages shall be payable at a rate of 0.5 per cent of the agreed price for each complete week of delay. If the delay concerns only a part of the goods, the liquidated damages shall be calculated on the part of the price which is properly attributable to the part of the goods which cannot be taken in use due to the delay. The liquidated damages shall not exceed 7.5 per cent of that part of the price on which it is calculated. The liquidated damages become due at the Buyer s written demand but not before all of the goods have been delivered or the contract is terminated under Clause 14. The Buyer loses his right to liquidated damages if he has not lodged a written claim for such damages within six months after the time when delivery should have taken place. 14. If the Buyer is entitled to maximum liquidated damages under Clause 13, and the goods are still not delivered, the Buyer may in writing demand delivery within a final reasonable period which shall not be less than one week. If the Seller fails to deliver within such final period and this is not due to any circumstance for which the Buyer is responsible, the Buyer may, by written notice to the Seller, terminate the contract in respect of that part of the goods which cannot be taken in use due to the delay. In case of such termination the Buyer shall also be entitled to compensation for the loss he suffers because of the Seller s delay to the extent that the loss exceeds the maximum of liquidated damages which the Buyer may claim under Clause 13. This compensation shall not exceed 7.5 per cent of that part of the price which is properly attributable to the part of the goods in respect of which the contract is terminated. The Buyer shall also have the right to terminate the contract by written notice to the Seller if it is clear that there will be a delay, which under Clause 13 would entitle the Buyer to maximum liquidated damages. In case of termination on this ground the Buyer shall be entitled to both maximum liquidated damages and compensation under the third paragraph of this Clause. Except for liquidated damages under Clause 13 and termination of the contract with limited compensation under this Clause 14, all other claims in respect of the Seller s delay shall be excluded. This limitation of the Seller s liability shall not apply, however, where the Seller has been guilty of gross negligence. 15. If the Buyer finds that he will be unable to accept delivery of the goods on the agreed date, or if delay on his part seems likely, he shall without undue delay notify the Seller thereof in writing stating the reason for the delay and, if possible, the time when he will be able to accept delivery. If the Buyer fails to accept delivery on the agreed date, he shall nevertheless make any payment which is dependent on delivery as if the goods in question had been delivered. The Seller shall arrange storage of the goods at the Buyer s risk and expense. If the Buyer so requires, the Seller shall insure the goods at the Buyer s expense. 16. Unless the Buyer s failure to accept delivery as referred to in Clause 15 is due to any such circumstance as described in Clause 36, the Seller may by written notice require the Buyer to accept delivery within a reasonable period. If, for any reason for which the Seller is not responsible, the Buyer fails to accept delivery within such period, the Seller may, by written notice to the Buyer, terminate the contract in respect of that part of the goods which is ready for delivery but has not been delivered due to the Buyer s default. The Seller shall then be entitled to compensation for the loss he has suffered by reason of the Buyer s default. The compensation shall not exceed that part of the price which is properly attributable to the part of the goods in respect of which the contract is terminated. Payment 17. Unless otherwise agreed, the agreed purchase price, together with value added tax, if any, shall be invoiced with one third at the formation of the contract, one third when the Seller gives written notice that the bulk of the goods are ready for delivery. Final payment shall be invoiced at delivery of the goods. The invoiced amount becomes due 30 days after the date of the invoice. 18. If the Buyer fails to pay, the Seller shall be entitled to interest from the due date at the rate of interest determined by the law on late payments in the Seller s country. If the Buyer fails to pay by the due date, the Seller shall also, after having notified the Buyer in writing thereof, suspend performance of his contractual obligations until payment is made. 19. If the Buyer has failed to pay the amount due within three months after the due date, the Seller may terminate the contract by written notice to the Buyer and, in addition to interest on late payment, claim compensation for the loss he has suffered. The compensation shall not exceed the agreed purchase price. Retention of Title 20. The goods shall remain the property of the Seller until paid for in full, to the extent that such retention of title is valid. Liability for Defects 21. The Seller shall, in accordance with the provisions of Clauses below, remedy any defect in the goods resulting from faulty design, materials or workmanship. The Seller is not liable for defects arising out of material provided by the Buyer or a design stipulated or specified by him. 22. The Seller s liability does not cover defects caused by circumstances, which arise after the risk has passed to the Buyer. The liability does not, for example, cover defects due to conditions of operation deviating from those anticipated in the contract or to improper use of the goods. Nor does it cover defects due to faulty maintenance or incorrect installation from the Buyer s side, alterations undertaken without the Seller s written consent or faulty repairs by the Buyer. Finally the liability does not cover normal wear and tear or deterioration. 23. The Seller s liability is limited to defects which appear within a period of one year from the date of delivery of the goods. If the goods are used more intensely than agreed, this period shall be reduced proportionately. 24. For parts, which have been repaired or replaced under Clause 21, the Seller shall have the same liability for defects as for the original goods for a period of one year. For other parts of the goods the liability period referred to in Clause 23 shall be extended only by the period during which the goods could not be used due to a defect for which the Seller is liable. 25. The Buyer shall notify the Seller in writing of a defect without undue delay after the defect has appeared and in no case later than two weeks after the expiry of the liability period defined in Clause 23 as supplemented by Clause 24. The notice shall contain a description of how the defect manifests itself. If the Buyer fails to notify the Seller in writing within the above time limits, he loses his right to make any claim in respect of the defect. If there is reason to believe that the defect may cause damage, notice shall be given forthwith. If notice is not given forthwith, the Buyer loses the right to make any claim based on damage which occurs and which could have been avoided if such notice had been given. 26. After receipt of a written notice under Clause 25, the Seller shall remedy the defect without undue delay. Within this limit the time for remedial work shall be chosen in order not to interfere unnecessarily with the Buyer s activities. The Seller shall bear the costs as specified in Clauses Remedial work shall be carried out at the Buyer s premises unless the Seller finds it appropriate to have the defective part or the goods sent to him for repair or replacement at his own premises. The Seller shall carry out dismantling and re-installation of the part if this requires special knowledge. If such special knowledge is not required, the Seller has fulfilled his obligations in respect of the defect when he delivers a duly repaired or replaced part to the Buyer. 27. If the Buyer gives such notice as referred to in Clause 25, and no defect is found for which the Seller is liable, the Seller shall be entitled to compensation for the work and costs which he has incurred as a result of the notice. 28. If remedy of the defect requires intervention in other equipment than the goods, the Buyer shall be responsible for any work or costs caused thereby. 29. All transports in connection with repair or replacement shall be at the Seller s risk and expense. The Buyer shall follow the Seller s instructions regarding how the transport shall be carried out. 30. The Buyer shall bear the increase in costs for remedying a defect which the Seller incurs when the goods are located elsewhere than at the destination stated in the contract or if no destination has been stated the place of delivery. 31. Defective parts, which have been replaced under Clause 21, shall be placed at the Seller s disposal and shall become his property. 32. If the Seller fails to fulfil his obligations under Clause 26 within a reasonable time, the Buyer may by written notice require him to do so within a final time. If the Seller fails to fulfil his obligations within that time limit, the Buyer may at his option: a) have the necessary remedial work carried out and/or have new parts manufactured at the Seller s risk and expense, provided that the Buyer proceeds in a reasonable manner, or b) demand a reduction of the agreed purchase price not exceeding 15 per cent thereof. If the defect is substantial, the Buyer may instead terminate the contract by written notice to the Seller. The Buyer shall also be entitled to such termination where the defect remains substantial after measures referred to in a). In case of termination, the Buyer shall be entitled to compensation for the loss he has suffered. The compensation shall not, however, exceed 15 per cent of the agreed purchase price. 33. Regardless of the provisions of Clauses 21 32, the Seller shall have no liability for defects in any part of the goods for more than two years from the start of the liability period referred to in Clause The Seller shall have no liability for defects save as stipulated in Clauses This applies to any loss the defect may cause, such as loss of production, loss of profit and other consequential economic loss. This limitation of the Seller s liability shall not apply, however, if he has been guilty of gross negligence. Liability for DAMAGe to Property Caused by the Goods 35. The Buyer shall indemnify and hold the Seller harmless to the extent that the Seller incurs liability towards any third party in respect of loss or damage for which the Seller is not liable towards the Buyer according to the second and third paragraphs of this Clause. The Seller shall have no liability for damage caused by the goods: a) to any (movable or immovable) property, or consequential loss due to such damage, occurring while the goods are in the Buyer s possession, or b) to products manufactured by the Buyer or to products of which the Buyer s products form a part. The above limitations of the Seller s liability shall not apply if he has been guilty of gross negligence. If a third party lodges a claim for compensation against Seller or Buyer for loss or damage referred to in this Clause, the other party to the contract shall forthwith be notified thereof in writing. The Seller and the Buyer shall be mutually obliged to let themselves be summoned to the court or arbitral tribunal which examines claims against either of them based on damage or loss alleged to have been caused by the goods. The liability as between the Seller and the Buyer shall, however, always be settled by arbitration in accordance with Clause 39. Grounds for Relief (Force Majeure) 36. The following circumstances shall constitute grounds for relief if they impede the performance of the contract or makes performance unreasonably onerous: industrial disputes and any other circumstance beyond the control of the parties, such as fire, war, mobilization or military call up of a comparable scope, requisition, seizure, trade and currency restrictions, insurrection and civil commotion, shortage of transport, general shortage of materials, restrictions in the supply of power and defects or delays in deliveries by sub-contractors caused by any such circumstance as referred to in this Clause. The above described circumstances shall constitute grounds for relief only if their effect on the performance of the contract could not be foreseen at the time of formation of the contract. 37. The party wishing to claim relief under Clause 36 shall without delay notify the other party in writing on the intervention and on the cessation of such circumstance. If grounds for relief prevent the Buyer from fulfilling his obligations, he shall reimburse the expenses incurred by the seller in securing and protecting the goods. 38. Notwithstanding other provisions of these General Conditions, either party shall be entitled to terminate the contract by notice in writing to the other party, if performance of the contract is delayed more than six months by reason of any grounds for relief as described in Clause 36. Disputes. Applicable Law 39. Disputes arising out of or in connection with the contract shall not be brought before the court, but shall be finally settled by arbitration in accordance with the law on arbitration applicable in the Seller s country. 40. All disputes arising out of the contract shall be judged according to the law of the Seller s country. 115

118 NOTES

119 GCE Group is one of the world s leading companies in the field of gas control equipment. The headquarters are in Malmö, Sweden, and the two major supply units are located in Europe and Asia. The company operates 15 subsidiaries around the world and employs more than 850 people. GCE Group includes four business areas Cutting & Welding, Process Applications, Medical and High Purity. Today s product portfolio corresponds to a large variety of applications, from single pressure regulators and blowpipes for cutting and welding to sophisticated gas supply systems for medical and electronics industry applications. Romania, Moldova, Turcia GCE Romania SRL Str. Al. Puskin, Nr.22, Ap.1, Parter, Sector 1 Bucuresti, ROMANIA Tel Fax: Art. Nr. CATROMED0114. Edition 1/2014. Alterations are subject to change without notice md GCE 2014