LOCKSS on LINUX. Network Data Transition 02/17/2011
|
|
- Florence Woods
- 8 years ago
- Views:
Transcription
1 LOCKSS on LINUX Network Data Transition 02/17/2011 1
2 Table of Contents Overview... 3 Prerequisites... 4 Network Transition Checklist... 5 Network Setup... 7 Test the Network Setup... 9 Create Transfer Script Run Transfer Script Appendix A: Netmask CIDR Translations Please read these instructions carefully if you have any questions, contact us by at lockss-support@lockss.org we are here to support you through this process. 2
3 Overview This document explains how to transition archived content from an OpenBSD LOCKSS box to a Linux LOCKSS box over the network. It is one of two methods for data transition available the other method is disk-to-disk data transition and is preferred when an OpenBSD LOCKSS box has been reinstalled with Linux. This document is organized in the following sections: 1. Prerequisites Details about your OpenBSD LOCKSS box and your Linux LOCKSS box are discussed here. 2. Network Transition Checklist Gathering information about your OpenBSD and Linux LOCKSS boxes and downloading the LOCKSS Transition CD. 3. Network Setup Booting the OpenBSD LOCKSS box with the LOCKSS Transition CD and running a program to configure the network. 4. Data Transfer Generating and running the transfer script. Getting Help! If you have any difficulty during your network transition, please your questions to lockss-support@lockss.org and we ll get back to you as soon as we can. 3
4 Prerequisites There are four prerequisites you should satisfy before starting the network data transition procedure. 1. Schedule downtime with your users - The network data transition could take anywhere from a day to a week, depending on how much archived content needs to be transitioned, as well as the quality and congestion of your network. During this time both LOCKSS boxes will be unavailable to your users. You might consider starting the transition later in the week, allowing it to run over the weekend. 2. OpenBSD LOCKSS Box - It must be connected to your network and configured with a unique IP address. 3. Linux LOCKSS Box It must be connected to your network and configured with a unique IP address (different from your OpenBSD LOCKSS box IP Address). The Linux LOCKSS box must be powered on. The LOCKSS software on the Linux LOCKSS box should already be configured by running the LOCKSS hostconfig program, but the LOCKSS daemon should never have been started. 4. Network Transition Checklist Complete the checklist in the next section and download the LOCKSS Transition CD. You ll need this information and the CD once you decide to start the network transition procedure. 4
5 Network Transition Checklist You will need to enter several pieces of information during the network transition. Please collect all this information before you start the transition procedure so it s available when you need it. OpenBSD LOCKSS Box Information Gather the following information from your existing OpenBSD LOCKSS box. Network Setup Information OpenBSD IP address OpenBSD Netmask (dotted decimal format) OpenBSD Gateway IP address Value OpenBSD DNS IP address OpenBSD DNS Search Domain NOTE 1: Please refer to the table in Appendix A to convert between CIDR notation and dotted decimal notation. NOTE 2: If you don t know your OpenBSD DNS Search Domain, log in as root on your OpenBSD system and look at the file /etc/resolv.conf. You may use this command to look at the file: cat /etc/resolv.conf Look for the line that begins with the word search to find your DNS search domain. 5
6 Linux LOCKSS Box Information Gather the following information from your new Linux LOCKSS box. Network Setup Information Linux IP address Value Linux root password Software Download LOCKSS Transition CD If you have not already done so, download and burn the LOCKSS Transition image to a blank CD. The image is published here: If you write down the root password on this piece of paper, be sure to store it in a safe place. You should always protect your root password and limit who has access to it. 6
7 Network Setup Replace the LOCKSS OpenBSD CD with the LOCKSS Transition CD in your OpenBSD LOCKSS box, then log in as root and type in the command shutdown h p now to shutdown your system and power it off. When the shutdown completes, wait three seconds and then power on your OpenBSD LOCKSS box. The LOCKSS Transition CD will take several minutes to boot on your OpenBSD LOCKSS box. When it is done booting, you should see the following screen: Step 1: Go to the net-transfer directory by entering cd net-transfer then hitting the Enter key. Step 2: Start the network setup program by entering./net-setup and then hitting the Enter key. 7
8 NOTE: Example values are used in the illustrations below for demonstration purposes only. Step 3: Enter the OpenBSD IP address from your Network Transition Checklist, then hit the Enter key: Step 4: Enter the OpenBSD Netmask from your Network Transition Checklist, then hit the Enter key: Step 5: Enter the OpenBSD Gateway IP Address from your Network Transition Checklist, then hit the Enter key: Step 6: Enter the OpenBSD Primary DNS IP Address from your Network Transition Checklist, then hit the Enter key: Step 7: Enter the OpenBSD DNS Search Domain from your Network Transition Checklist, then hit the Enter key: This completes the net-setup program and we are returned to the command prompt. 8
9 Test the Network Setup Your OpenBSD LOCKSS box should now be functioning on the network. It is critical that your network is working properly for the network transition to be successful, so let s run a few tests first before proceeding. Test 1: At the command prompt, enter ping c 5 lockss.org then hit the Enter key. This command should take 5 10 seconds to complete. Examine the ping statistics at the end: You should see 5 packets transmitted and expect to see 5 received, 0% packet loss Test 2: At the command prompt, try the same command as Test 1, but instead of using lockss.org as your ping target, use the Linux IP address from your Network Transition Checklist. Below is an example of a successful test to a Linux IP address. At the bottom of the screen we see 5 packets transmitted, 5 received, 0% packet loss NOTE: If either test reports packet loss or some other error, you may have a network issue that could prevent the rest of the data transition from completing successfully. Please contact LOCKSS support at lockss-support@lockss.org or your institution s network administrator before continuing with the network transition procedure. 9
10 Create Transfer Script The network transfer script is dynamically created based on user input and an automatic survey of the Linux LOCKSS box. The following steps create the network transfer script. NOTE: Depending on how much content you have archived, this step could take many hours to complete! Step 1: Start from the command prompt by entering./build-network-transfer then hitting the Enter key. Step 2: Enter the Linux IP address from your Network Transition Checklist, then hit the Enter key: Step 3: Enter the Linux root password from your Network Transition Checklist, then hit the Enter key: Step 4: Hit the enter key to accept the detected OpenBSD disk(s). NOTE: If you see a warning on the line that says Checking remote caches, this could indicate a bigger problem. Please contact LOCKSS support by at lockss-support@lockss.org 10
11 The transfer script will now be created. This could take some time, depending on how much archived content is stored on the OpenBSD system. You should see output like this: You may inspect the network transfer script if you like using the command less /tmp/transfer 11
12 Run Transfer Script Now you are ready to run the transfer script. NOTE: Depending on how much content you have archived, this step could take many days to complete! Step 1: Start the transfer script from the command prompt by entering /tmp/transfer then hitting the enter key. The example below shows a very small transfer. A status line is printed out after each archival unit (AU) has been successfully transferred. The largest AUs are transferred at the beginning of the transfer script, so it might take a while before the first status line appears. 12
13 Appendix A: Netmask CIDR Translations This Netmask Translation Table shows CIDR values and the equivalent dotted decimal notation. You must supply a netmask in Dotted Decimal Notation when you run the Network Setup program. CIDR Dotted Decimal Notation / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
LOCKSS on LINUX. CentOS6 Installation Manual 08/22/2013
LOCKSS on LINUX CentOS6 Installation Manual 08/22/2013 1 Table of Contents Overview... 3 LOCKSS Hardware... 5 Installation Checklist... 6 BIOS Settings... 9 Installation... 10 Firewall Configuration...
More informationLOCKSS on LINUX. Installation Manual and the OpenBSD Transition 02/17/2011
LOCKSS on LINUX Installation Manual and the OpenBSD Transition 02/17/2011 1 Table of Contents Overview... 3 LOCKSS Hardware... 5 Installation Checklist... 7 BIOS Settings... 10 Installation... 11 Firewall
More informationUsing iscsi with BackupAssist. User Guide
User Guide Contents 1. Introduction... 2 Documentation... 2 Terminology... 2 Advantages of iscsi... 2 Supported environments... 2 2. Overview... 3 About iscsi... 3 iscsi best practices with BackupAssist...
More informationRemote Unix Lab Environment (RULE)
Remote Unix Lab Environment (RULE) Kris Mitchell krmitchell@swin.edu.au Introducing RULE RULE provides an alternative way to teach Unix! Increase student exposure to Unix! Do it cost effectively http://caia.swin.edu.au
More informationExtending Remote Desktop for Large Installations. Distributed Package Installs
Extending Remote Desktop for Large Installations This article describes four ways Remote Desktop can be extended for large installations. The four ways are: Distributed Package Installs, List Sharing,
More informationTitle: Setting Up A Site to Site VPN Between Microsoft Azure and the Corporate Network
Dean Suzuki Blog Title: Setting Up A Site to Site VPN Between Microsoft Azure and the Corporate Network Created: 6/17/2014 Description: In this blog post, I record the process that I went through to: Setup
More informationCreate a virtual machine at your assigned virtual server. Use the following specs
CIS Networking Installing Ubuntu Server on Windows hyper-v Much of this information was stolen from http://www.isummation.com/blog/installing-ubuntu-server-1104-64bit-on-hyper-v/ Create a virtual machine
More informationSOA Software API Gateway Appliance 7.1.x Administration Guide
SOA Software API Gateway Appliance 7.1.x Administration Guide Trademarks SOA Software and the SOA Software logo are either trademarks or registered trademarks of SOA Software, Inc. Other product names,
More informationSavvius Insight Initial Configuration
The configuration utility on Savvius Insight lets you configure device, network, and time settings. Additionally, if you are forwarding your data from Savvius Insight to a Splunk server, You can configure
More informationTHE HONG KONG POLYTECHNIC UNIVERSITY Department of Electronic and Information Engineering
THE HONG KONG POLYTECHNIC UNIVERSITY Department of Electronic and Information Engineering ENG 224 Information Technology Laboratory 6: Internet Connection Sharing Objectives: Build a private network that
More informationRSA Authentication Manager 7.1 to 8.1 Migration Guide: Upgrading RSA SecurID Appliance 3.0 On Existing Hardware
RSA Authentication Manager 7.1 to 8.1 Migration Guide: Upgrading RSA SecurID Appliance 3.0 On Existing Hardware Contact Information Go to the RSA corporate website for regional Customer Support telephone
More informationClearswift SECURE Exchange Gateway Installation & Setup Guide. Version 1.0
Clearswift SECURE Exchange Gateway Installation & Setup Guide Version 1.0 Copyright Revision 1.0, December, 2013 Published by Clearswift Ltd. 1995 2013 Clearswift Ltd. All rights reserved. The materials
More informationGX-V. Quick Start Guide. Microsoft Hyper-V Hypervisor. Before You Begin SUMMARY OF TASKS. Before You Begin WORKSHEET VIRTUAL GMS SERVER
Quick Start Guide GX-V VIRTUAL GMS SERVER Microsoft Hyper-V Hypervisor 2012 Silver Peak Systems, Inc. Before You Begin Windows 2008 server installed and Hyper-V is running Hyper-V management software is
More information1 Data information is sent onto the network cable using which of the following? A Communication protocol B Data packet
Review questions 1 Data information is sent onto the network cable using which of the following? A Communication protocol B Data packet C Media access method D Packages 2 To which TCP/IP architecture layer
More informationHow to Backup XenServer VM with VirtualIQ
How to Backup XenServer VM with VirtualIQ 1. Using Live Backup of VM option: Live Backup: This option can be used, if user does not want to power off the VM during the backup operation. This approach takes
More informationVPN Configuration Guide. Linksys (Belkin) LRT214 / LRT224 Gigabit VPN Router
VPN Configuration Guide Linksys (Belkin) LRT214 / LRT224 Gigabit VPN Router 2014 equinux AG and equinux USA, Inc. All rights reserved. Under copyright law, this manual may not be copied, in whole or in
More informationOS Installation Guide Red Hat Linux 9.0
OS Installation Guide Red Hat Linux 9.0 C o n t e n t s Contents 3 About This Guide 5 1 Planning Your Installation 7 Requirements 7 2 Installing Red Hat 9.0 Error! Bookmark not defined. What s Next? 19
More informationTrial environment setup. Exchange Server Archiver - 3.0
Trial environment setup Exchange Server Archiver - 3.0 Introduction This document describes how you can set up a trial environment for using Exchange Server Archiver with Exchange Server 2007. You do not
More informationGuardian Digital. 4 Internet Defense and Detection System 5
Guardian Digital Internet Defense and Detection System IDDS Guide Copyright c 2000-2003 Guardian Digital, Inc. Contents 1 INTRODUCTION 1 2 CONTACTING GUARDIAN DIGITAL 2 3 TECHNICAL SUPPORT 3 4 Internet
More informationPlexxi Control Installation Guide Release 2.1.0
Plexxi Control Installation Guide Release 2.1.0 702-20002-10 Rev 1.2 February 19, 2015 100 Innovative Way - Suite 3322 Nashua, NH 03062 Tel. +1.888.630.PLEX (7539) www.plexxi.com Notices The information
More informationNOC PS manual. Copyright Maxnet 2009 2015 All rights reserved. Page 1/45 NOC-PS Manuel EN version 1.3
NOC PS manual Copyright Maxnet 2009 2015 All rights reserved Page 1/45 Table of contents Installation...3 System requirements...3 Network setup...5 Installation under Vmware Vsphere...8 Installation under
More informationInstallation Guide to the Snare Server Installation Guide to the Snare Server
Installation Guide to the Snare Server InterSect Alliance International Pty Ltd Page 1 of 19 Intersect Alliance International Pty Ltd. All rights reserved worldwide. Intersect Alliance Pty Ltd shall not
More informationOperating System Installation Guidelines
Operating System Installation Guidelines The following document guides you step-by-step through the process of installing the operating systems so they are properly configured for boot camp. The document
More informationBF2CC Daemon Linux Installation Guide
BF2CC Daemon Linux Installation Guide Battlefield 2 + BF2CC Installation Guide (Linux) 1 Table of contents 1. Introduction... 3 2. Opening ports in your firewall... 4 3. Creating a new user account...
More informationTesting and Restoring the Nasuni Filer in a Disaster Recovery Scenario
Testing and Restoring the Nasuni Filer in a Disaster Recovery Scenario Version 7.2 November 2015 Last modified: November 3, 2015 2015 Nasuni Corporation All Rights Reserved Document Information Testing
More informationSetting Up the EntraPass Mirror Database and Redundant Server
Setting Up the EntraPass Mirror Database and Redundant Server The purpose of this document is to help EntraPass system installers and administrators define and install the Mirror Database and Redundant
More informationVERITAS NetBackup 6.0 High Availability
VERITAS NetBackup 6.0 High Availability System Administrator s Guide for UNIX, Windows, and Linux N152848 September 2005 Disclaimer The information contained in this publication is subject to change without
More informationReflection DBR USER GUIDE. Reflection DBR User Guide. 995 Old Eagle School Road Suite 315 Wayne, PA 19087 USA 610.964.8000 www.evolveip.
Reflection DBR USER GUIDE 995 Old Eagle School Road Suite 315 Wayne, PA 19087 USA 610.964.8000 www.evolveip.net Page 1 of 1 Table of Contents Overview 3 Reflection DBR Client and Console Installation 4
More informationCycleServer Grid Engine Support Install Guide. version 1.25
CycleServer Grid Engine Support Install Guide version 1.25 Contents CycleServer Grid Engine Guide 1 Administration 1 Requirements 1 Installation 1 Monitoring Additional OGS/SGE/etc Clusters 3 Monitoring
More informationHOWTO: Set up a Vyatta device with ThreatSTOP in router mode
HOWTO: Set up a Vyatta device with ThreatSTOP in router mode Overview This document explains how to set up a minimal Vyatta device in a routed configuration and then how to apply ThreatSTOP to it. It is
More informationTesting and Restoring the Nasuni Filer in a Disaster Recovery Scenario
Testing and Restoring the Nasuni Filer in a Disaster Recovery Scenario Version 7.0 July 2015 2015 Nasuni Corporation All Rights Reserved Document Information Testing Disaster Recovery Version 7.0 July
More informationIt should be noted that the installer will delete any existing partitions on your disk in order to install the software required to use BLËSK.
Installation Guide Introduction... 3 1. Booting from the CD... 4 2. Choose the server type to install... 5 3. Disk formatting and installation... 6 4. Confirmation of disk formatting... 7 5. Program installation...
More informationMcAfee SMC Installation Guide 5.7. Security Management Center
McAfee SMC Installation Guide 5.7 Security Management Center Legal Information The use of the products described in these materials is subject to the then current end-user license agreement, which can
More informationSSH and Basic Commands
SSH and Basic Commands In this tutorial we'll introduce you to SSH - a tool that allows you to send remote commands to your Web server - and show you some simple UNIX commands to help you manage your website.
More informationNexentaConnect for VMware Virtual SAN
NexentaConnect for VMware Virtual SAN QuickStart Installation Guide 1.0.2 FP2 Date: October, 2015 Subject: NexentaConnect for VMware Virtual SAN QuickStart Installation Guide Software: NexentaConnect for
More informationSuperLumin Nemesis. Administration Guide. February 2011
SuperLumin Nemesis Administration Guide February 2011 SuperLumin Nemesis Legal Notices Information contained in this document is believed to be accurate and reliable. However, SuperLumin assumes no responsibility
More informationBroadband Router ESG-103. User s Guide
Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits
More informationVirtual Appliance for VMware Server. Getting Started Guide. Revision 2.0.2. Warning and Disclaimer
Virtual Appliance for VMware Server Getting Started Guide Revision 2.0.2 Warning and Disclaimer This document is designed to provide information about the configuration and installation of the CensorNet
More informationUbuntu 12.04 Sever Administration
Ubuntu 12.04 Sever Administration 1. Introduction to Ubuntu Linux Ubuntu Server Ubuntu Server 12.04 Server Installation Alternatives and Options Server on the Desktop Installation Desktop on the server
More informationNAS 206 Using NAS with Windows Active Directory
NAS 206 Using NAS with Windows Active Directory Connect your NAS to a Windows Active Directory domain A S U S T O R C O L L E G E COURSE OBJECTIVES Upon completion of this course you should be able to:
More informationConfiguring SSL VPN on the Cisco ISA500 Security Appliance
Application Note Configuring SSL VPN on the Cisco ISA500 Security Appliance This application note describes how to configure SSL VPN on the Cisco ISA500 security appliance. This document includes these
More informationDigipass Plug-In for IAS. IAS Plug-In IAS. Microsoft's Internet Authentication Service. Installation Guide
Digipass Plug-In for IAS IAS Plug-In IAS Microsoft's Internet Authentication Service Installation Guide Disclaimer of Warranties and Limitations of Liabilities Disclaimer of Warranties and Limitations
More informationLab 1: Introduction to the network lab
CSCI 312 - DATA COMMUNICATIONS AND NETWORKS FALL, 2014 Lab 1: Introduction to the network lab NOTE: Be sure to bring a flash drive to the lab; you will need it to save your data. For this and future labs,
More informationQuick Installation Guide. Overview. PLANET VIP-156/VIP-156PE/VIP-158 Quick Installation Guide
Quick Installation Guide Overview This quick installation guide describes the objectives; organization and basic installation of the PLANET VIP-156/VIP-156PE/VIP-158 VoIP Phone Adapter, and explains how
More informationFILE TRANSFER PROTOCOL (FTP) SITE
FILE TRANSFER PROTOCOL (FTP) SITE Section 1 - SPIN System Overview As part of the digital plan submission process that Registries is currently implementing a File Transfer Protocol (FTP) site has been
More informationDeploying Windows Streaming Media Servers NLB Cluster and metasan
Deploying Windows Streaming Media Servers NLB Cluster and metasan Introduction...................................................... 2 Objectives.......................................................
More informationHOWTO: Set up a Vyatta device with ThreatSTOP in bridge mode
HOWTO: Set up a Vyatta device with ThreatSTOP in bridge mode Overview This document explains how to set up a minimal Vyatta device in a transparent bridge configuration and then how to apply ThreatSTOP
More informationUpgrading Software Using the Online Installer
Upgrading Software Using the Online Installer Last Updated: December 8, 2009 This chapter provides the procedures for upgrading from a previous software version of the Cisco Integrated Storage System module
More informationConfiguring Basic Settings
CHAPTER 12 This chapter describes how to configure basic settings on your ASASM that are typically required for a functioning configuration. This chapter includes the following sections: Configuring the
More informationIPSecuritas 3.x. Configuration Instructions. AVM FRITZ!Box. for
IPSecuritas.x Configuration Instructions for Lobotomo Software June 17, 2009 Legal Disclaimer Contents Lobotomo Software (subsequently called "Author") reserves the right not to be responsible for the
More informationAdministration Guide. . All right reserved. For more information about Specops Gpupdate and other Specops products, visit www.specopssoft.
. All right reserved. For more information about Specops Gpupdate and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Gpupdate is a trademark owned by Specops Software.
More informationRed Hat System Administration 1(RH124) is Designed for IT Professionals who are new to Linux.
Red Hat Enterprise Linux 7- RH124 Red Hat System Administration I Red Hat System Administration 1(RH124) is Designed for IT Professionals who are new to Linux. This course will actively engage students
More informationREADYNAS INSTANT STORAGE. Quick Installation Guide
READYNAS INSTANT STORAGE Quick Installation Guide Table of Contents Step 1 Connect to FrontView Setup Wizard 3 Installing RAIDar on Windows 3 Installing RAIDar on Mac OS X 3 Installing RAIDar on Linux
More informationGetting Started with ESXi Embedded
ESXi 4.1 Embedded vcenter Server 4.1 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new edition. To check for more recent
More informationComodo MyDLP Software Version 2.0. Installation Guide Guide Version 2.0.010215. Comodo Security Solutions 1255 Broad Street Clifton, NJ 07013
Comodo MyDLP Software Version 2.0 Installation Guide Guide Version 2.0.010215 Comodo Security Solutions 1255 Broad Street Clifton, NJ 07013 Table of Contents 1.About MyDLP... 3 1.1.MyDLP Features... 3
More informationGet quick control over your Linux server with server commands
Get quick control over your Linux server with server commands by Jack Wallen Linux is a powerful environment for both the desktop and server: Both systems have matured so any action can be managed with
More informationCommandCenter Secure Gateway
CommandCenter Secure Gateway Quick Setup Guide for CC-SG Virtual Appliance and lmadmin License Server Management This Quick Setup Guide explains how to install and configure the CommandCenter Secure Gateway.
More informationEVault Software. Course 361 Protecting Linux and UNIX with EVault
EVault Software Course 361 Protecting Linux and UNIX with EVault Table of Contents Objectives... 3 Scenario... 3 Estimated Time to Complete This Lab... 3 Requirements for This Lab... 3 Computers Used in
More informationIP Address: the per-network unique identifier used to find you on a network
Linux Networking What is a network? A collection of devices connected together Can use IPv4, IPv6, other schemes Different devices on a network can talk to each other May be walls to separate different
More informationCONNECTING TO DEPARTMENT OF COMPUTER SCIENCE SERVERS BOTH FROM ON AND OFF CAMPUS USING TUNNELING, PuTTY, AND VNC Client Utilities
CONNECTING TO DEPARTMENT OF COMPUTER SCIENCE SERVERS BOTH FROM ON AND OFF CAMPUS USING TUNNELING, PuTTY, AND VNC Client Utilities DNS name: turing.cs.montclair.edu -This server is the Departmental Server
More informationEMC Data Domain Management Center
EMC Data Domain Management Center Version 1.1 Initial Configuration Guide 302-000-071 REV 04 Copyright 2012-2015 EMC Corporation. All rights reserved. Published in USA. Published June, 2015 EMC believes
More informationSETTING UP A LAMP SERVER REMOTELY
SETTING UP A LAMP SERVER REMOTELY It s been said a million times over Linux is awesome on servers! With over 60 per cent of the Web s servers gunning away on the mighty penguin, the robust, resilient,
More informationFREEping Installation and User Guide
FREEping Installation and User Guide Tools4ever Hermesweg 46 3741 GP Baarn Version 1.6 (c) Tools4ever 1998-2000 http://www.tools4ever.com 1. Contents 1. Contents...2 2. Introduction...3 3. Installation...4
More informationInstallation Overview
Contents Installation Overview... 2 How to Install Ad-Aware Management Server... 3 How to Deploy the Ad-Aware Security Solutions... 5 General Deployment Conditions... 5 Deploying Ad-Aware Management Agent...
More informationUser Manual. Onsight Management Suite Version 5.1. Another Innovation by Librestream
User Manual Onsight Management Suite Version 5.1 Another Innovation by Librestream Doc #: 400075-06 May 2012 Information in this document is subject to change without notice. Reproduction in any manner
More informationInstalling CPV Lab Version 2.17
Installing CPV Lab Version 2.17 END-USER LICENSE AGREEMENT ( EULA ) FOR CPV LAB This End-User License Agreement ("EULA") pertains to the CPV Lab product (called Software" in this Agreement). Read the terms
More informationCyberGuard Firewall Version 6.2 Quick Start Guide
CyberGuard Firewall Version 6.2 Quick Start Guide FW006-000 August 2005 Copyright 2005 by CyberGuard Corporation. All rights reserved. This publication or any part thereof may not be reproduced for any
More informationExtreme Control Center, NAC, and Purview Virtual Appliance Installation Guide
Extreme Control Center, NAC, and Purview Virtual Appliance Installation Guide 9034968 Published April 2016 Copyright 2016 All rights reserved. Legal Notice Extreme Networks, Inc. reserves the right to
More informationNETWORK ADMINISTRATION
NETWORK ADMINISTRATION INTRODUCTION The PressureMAP software provides users who have access to an Ethernet network supporting TCP/IP with the ability to remotely log into the MAP System via a network connection,
More informationConfiguring a Windows 2003 Server for IAS
Configuring a Windows 2003 Server for IAS When setting up a Windows 2003 server to function as an IAS server for our demo environment we will need the server to serve several functions. First of all we
More informationHow to Use? SKALICLOUD DEMO
How to Use? SKALICLOUD DEMO Account Login Page SkaliCloud Control Panel Overview Step 1: Click Add and Select Server Button to create your Server, add your Drive, Private Vlan or Static IP You are now
More informationLinux firewall. Need of firewall Single connection between network Allows restricted traffic between networks Denies un authorized users
Linux firewall Need of firewall Single connection between network Allows restricted traffic between networks Denies un authorized users Linux firewall Linux is a open source operating system and any firewall
More informationVirtzone Cloud Control User Guide
Virtzone Cloud Control User Guide August 2013 Table of Contents 1. What is Virtzone Cloud Control?... 3 2. What this document covers... 3 This document covers the basic steps required to log on to and
More informationThis chapter describes how to set up and manage VPN service in Mac OS X Server.
6 Working with VPN Service 6 This chapter describes how to set up and manage VPN service in Mac OS X Server. By configuring a Virtual Private Network (VPN) on your server you can give users a more secure
More informationLoad Balancing. Outlook Web Access. Web Mail Using Equalizer
Load Balancing Outlook Web Access Web Mail Using Equalizer Copyright 2009 Coyote Point Systems, Inc. Printed in the USA. Publication Date: January 2009 Equalizer is a trademark of Coyote Point Systems
More informationEvaluation guide. Vyatta Quick Evaluation Guide
VYATTA, INC. Evaluation guide Vyatta Quick Evaluation Guide A simple step-by-step guide to configuring network services with Vyatta Open Source Networking http://www.vyatta.com Overview...1 Booting Up
More information[HOW TO RECOVER AN INFINITI/EVOLUTION MODEM IDX3.0.0.0] 1
[HOW TO RECOVER AN INFINITI/EVOLUTION MODEM IDX3.0.0.0] 1 How to Recover an infiniti/evolution Modem Software Reference idx 3.0.0.0 (12.0.0.0) Updated: November 17 th 2011 Overview Recovery Procedures
More informationIntroduction to DirectAccess in Windows Server 2012
Introduction to DirectAccess in Windows Server 2012 Windows Server 2012 Hands-on lab In this lab, you will configure a Windows 8 workgroup client to access the corporate network using DirectAccess technology,
More informationAmahi Instruction Manual
History of Amahi Chapter 1 Installing fedora 12 and Amahi Home Digital Assistant (HDA) Chapter 2 Your DHCP/DNS options Chapter 3 Network Troubleshooting Chapter 4 Getting Started Appendix: Advanced Hard
More informationWavelink Avalanche Mobility Center Linux Reference Guide
Wavelink Avalanche Mobility Center Linux Reference Guide Version 5.0 amc-rg-linux-50-20100621 Revised 21/6/2010 ii Copyright 2010 by Wavelink Corporation All rights reserved. Wavelink Corporation 6985
More informationGuardian Digital WebTool Firewall HOWTO. by Pete O Hara
Guardian Digital WebTool Firewall HOWTO by Pete O Hara Guardian Digital WebTool Firewall HOWTO by by Pete O Hara Revision History Revision $Revision: 1.1 $ $Date: 2006/01/03 17:25:17 $ Revised by: pjo
More informationScalable Linux Clusters with LVS
Scalable Linux Clusters with LVS Considerations and Implementation, Part II Eric Searcy Tag1 Consulting, Inc. emsearcy@tag1consulting.com May 2008 Abstract Whether you are perusing mailing lists or reading
More informationInstalling and Configuring vcloud Connector
Installing and Configuring vcloud Connector vcloud Connector 2.7.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new
More informationAlienVault Unified Security Management (USM) 4.x-5.x. Deploying HIDS Agents to Linux Hosts
AlienVault Unified Security Management (USM) 4.x-5.x Deploying HIDS Agents to Linux Hosts USM 4.x-5.x Deploying HIDS Agents to Linux Hosts, rev. 2 Copyright 2015 AlienVault, Inc. All rights reserved. AlienVault,
More informationLAMP Quickstart for Red Hat Enterprise Linux 4
LAMP Quickstart for Red Hat Enterprise Linux 4 Dave Jaffe Dell Enterprise Marketing December 2005 Introduction A very common way to build web applications with a database backend is called a LAMP Stack,
More informationLAB Configuring NAT. Objective. Background/Preparation
LAB Configuring NAT Objective Configure a router to use network address translation (NAT) to convert internal IP addresses, typically private addresses, into outside public addresses. Configure static
More informationTB168 (Rev4) - Networking Linux Based Controls
TB168 (Rev4) - Networking Linux Based Controls Creating a Network If not already connected, create the network using cables, switches, routers, etc. To successful connect a DHCP network you will require
More informationNavigating the Rescue Mode for Linux
Navigating the Rescue Mode for Linux SUPPORT GUIDE DEDICATED SERVERS ABOUT THIS GUIDE This document will take you through the process of booting your Linux server into rescue mode to identify and fix the
More informationGood Morning Wireless! SSID: MSFTOPEN No Username or Password Required
Good Morning Wireless! SSID: MSFTOPEN No Username or Password Required 2 Today s Agenda - 9:00-10:30 - Windows Azure Infrastructure Services - 10:30-10:45 - Break - 10:45-12:00 - Windows Azure Infrastructure
More informationCASHNet Secure File Transfer Instructions
CASHNet Secure File Transfer Instructions Copyright 2009, 2010 Higher One Payments, Inc. CASHNet, CASHNet Business Office, CASHNet Commerce Center, CASHNet SMARTPAY and all related logos and designs are
More informationI N S T A L L A T I O N M A N U A L
I N S T A L L A T I O N M A N U A L 2015 Fastnet SA, St-Sulpice, Switzerland. All rights reserved. Reproduction in whole or in part in any form of this manual without written permission of Fastnet SA is
More informationLAN TCP/IP and DHCP Setup
CHAPTER 2 LAN TCP/IP and DHCP Setup 2.1 Introduction In this chapter, we will explain in more detail the LAN TCP/IP and DHCP Setup. 2.2 LAN IP Network Configuration In the Vigor 2900 router, there are
More informationUser s Manual Network Management Card
User s Manual Network Management Card RMCARD202 Intelligent Network Management Card allows a UPS system to be managed, monitored, and configured Version 1.0 E-K01-SNMP005-0 TABLE OF CONTENTS Introduction
More informationHC8 Installation Guide
HC8 Installation Guide Table of Contents Welcome... 3 HC8 Installation Guide... 3 Introduction... 6 System Specifications:... 7 Type of Installers:... 7 HC8 Installation... 9 After Installation...22 Windows
More informationNETWORK SET UP GUIDE FOR
NETWORK SET UP GUIDE FOR USZ11ZS USX21ZS USX31ZAND DVRX16D DVRX32D HDDX13D SUPPORTING ROUTER D-Link Linksys NETGEAR BELKI IP Addresses on the Internet When you connect to the Internet, through dialup connection,
More informationOptus@Home Cable Internet Connection & Sharing using Red Hat 7.2 (Version 1.0, 29-11-2001)
Optus@Home Cable Internet Connection & Sharing using Red Hat 7.2 (Version 1.0, 29-11-2001) Purpose: To be able to Setup your Optus cable connection and share the connection on your home LAN. This howto
More informationUpdating MNS-BB CUSTOMER SUPPORT INFORMATION PK012906
Updating MNS-BB PK012906 CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500
More informationConfiguring the Edgewater 4550 for use with the Bluestone Hosted PBX
Configuring the Edgewater 4550 for use with the Bluestone Hosted PBX NOTE: This is an advisory document to be used as an aid to resellers and IT staff looking to use the Edgewater 4550 in conjunction with
More informationInternet Filtering Appliance. User s Guide VERSION 1.2
Internet Filtering Appliance User s Guide VERSION 1.2 User s Guide VERSION 1.2 InternetSafety.com, Inc 3979 South Main Street Suite 230 Acworth, GA 30101 Phone 678 384 5300 Fax 678 384 5299 1 Table of
More informationHow To Install An Aneka Cloud On A Windows 7 Computer (For Free)
MANJRASOFT PTY LTD Aneka 3.0 Manjrasoft 5/13/2013 This document describes in detail the steps involved in installing and configuring an Aneka Cloud. It covers the prerequisites for the installation, the
More information