KINETICS QuakeLoc Connector

Transcription

1 MADE IN THE USA MADE IN THE USA MADE IN THE USA MADE IN THE USA QuakeLoc Seismic Cable Restraint Connector for piping, duct, electrical cable trays, and suspended equipment.

2 MADE IN THE USA QuakeKit-P KINETICS QuakeLoc Connector is featured in our new lineup of standard seismic cable restraint systems. Sure to be a contractor favorite, the QuakeLoc connector quickly and easily fastens cables used in the seismic restraint of piping, duct, electrical cable trays, and suspended equipment. QuakeLoc is proudly made in the USA. Seismic Cable Restraint Systems carry tension only loads along the axis of the cable. They are used in pairs 180-degrees apart to restrain pipe, duct, electrical distribution systems or equipment in each axis. Cable restraints provide a load path between the building and the restrained component to ensure that it moves with the building. Bracing is required on both primary axes for all restrained systems. Spacing is determined by the building code and specifying engineer. Cable restraints are required for isolated systems as rigid restraints such as strut will short circuit the isolation. Kinetics QuakeLoc connector is available for purchase as part of Kinetics QuakeKit-P (Pipe), QuakeKit-D (Duct), and QuakeBulk seismic cable restraint systems. Kinetics QuakeKits are competitively priced and offer substantial labor savings when compared to competitors systems. Each kit includes the necessary hardware to connect to suspended components. Hardware to attach QuakeKit systems to concrete, steel or wood structures is also available. QuakeKit Capacities Model Cable Diameter Cable Length Max Cable Tension QuakeKit-P/D-2 QuakeKit-P/D-3 QuakeKit-P/D-4 1/8 in 3/16 in 1/4 in 3 mm 5 mm 6 mm 15 ft 15 ft 15 ft 4.57 m 4.57 m 4.57 m 1000 lbs 2100 lbs 3350 lbs 454 kg 953 kg 1520 kg

3 UAK QuakeKit-D for Duct, Suspended Equipment & Electrical Kinetics QuakeKit-D is specifically designed to provide the necessary components to properly restrain duct, electrical components and suspended equipment. Each prepackaged kit contains: 2 Thimbles 2 15-ft swaged cables 4 KSUA-2 brackets 2 QuakeLoc connectors Suspended Equipment Example Kinetics Isolation Hangers KHRC Rod Stiffener Kit QuakeLoc connector KSUA Cable Attachment Brackets Quake Kit-D

4 E K QuakeKit-P for Piping Building code requires piping to be braced both in transverse and longitudinal directions. Kinetics QuakeKit-P is specifically designed to provide the necessary components to properly restrain a piping system. Each prepackaged kit contains: 2 KSUA-2 brackets 2 Thimbles 2 15-ft swaged cables 2 QuakeLoc connectors 2 KSCA brackets and the necessary hardware to connect to a threaded rod Suspended Piping Example Kinetics Isolation Hangers KHRC Rod Stiffener Kit KSUA Cable Attachment Brackets QuakeLoc connector Quake Kit-P

5 ITS QuakeBulk Kinetics QuakeBulk is a universal kit specially designed for application where more than 15-ft of cable will be required. Bulk cable sold separately. This prepackaged kit contains: 2 KSUA-2 brackets 4 Thimbles 4 QuakeLoc connectors 2 KSCA brackets and the necessary hardware to connect to a threaded rod Attachment Hardware Kinetics offers a wide range of attachment hardware options depending on the situations. Concrete applications require the use of our model KCCAB cracked concrete anchor, model KMTB CMU block anchor or KAABS adhesive anchor. For steel applications, we can provide bolts, nuts and washers or brackets can be welded directly to steel. KCCAB KMTB KAABS QuakeBulk

6 MADE IN THE USA With over 50 years of experience, Kinetics Noise Control has extensive experience in the design, manufacturing and application of innovative products to control sound and vibration. Kinetics pioneered development of precompressed, molded fiberglass pad isolators that would be incorporated into a dynamic new floor isolation system. Kinetics Noise Control now produces the industry s largest selection of inspired products to address vibration and noise control, room acoustics, and seismic restraint concerns for almost any application. Value is added with our experienced team of engineering and customer support personnel ready to work with you. Our experienced staff of over twenty (20) technically trained individuals includes ten (10) licensed Professional Engineers, five (5) holding Master s degrees and two (2) who have earned Ph.D. s. These individuals are spread across Engineering and Manufacturing centers located in Columbus, Ohio (USA), Toronto, Ontario (Canada) and Hong Kong (China). Their combined experience spans over 400 years! Noteworthy Projects Lou Ruvo Brain Institute, Las Vegas NV Indu and Raj Soin Medical Center, Beavercreek, OH Burj Khalifa Tower Dubai New Quito International Airport, Quito, Ecuador City of Dreams / Grand Hyatt, Macau Microsoft headquarters, Beijing Victoria Harbour Tunnel Project, Hong Kong The Venetian Hotel and Casino, Macau City Center, Las Vegas, NV River Oak Hospital, Jackson MS Roper St. Francis, Charleston, SC Kaleida Healthcare, Buffalo, NY Syracuse VA Hospital, Syracuse, NY Dublin Methodist Hospital, Dublin, OH St. Anthony s Medical Center, St. Louis, MO McCarren Airport, Las Vegas, NV American Snuff Company, Memphis, TN Duke Medical Center, Durham, NC Filmore Hospital, Genera, NE ECMC Kidney Care, Buffalo, NY Columbia College, Hamilton, Ontario Hamilton Health Science Building, Hamilton Ontario Toronto Police Station, Toronto, Ontario kineticsnoise.com/quakeloc/ [email protected] Dublin, Ohio, USA Las Vegas, Nevada, USA Toronto, Ontario, Canada Hong Kong, China Kinetics Noise Control, Inc. is continually upgrading the quality of our products. We reserve the right to make changes to this and all products without notice. QUAKELOC 6/12