MIB Specification. WJ-HD600 Series. Document Version: March.10. Panasonic System Networks Co.,Ltd.

Transcription

1 MIB Specification WJ-HD600 Series Document Version: March.10 Panasonic System Networks Co.,Ltd.

2 Version History Version 0.02 Date of issue 2011.March.1 6 First Version Description Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S); (2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER; (3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE CORRESPONDING PRODUCT (S) BY THE USER; (4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY; (5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCECAMERA S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE.

3 Table of contents 1. INTRODUCTION OUTLINE MIB STRUCTURE COMMON MIB(MIB-2) SYSTEM INTERFACE IP PRIVATE MIB PANASONIC COMMON MIB PSSSSD COMMON MIB (COMMON) PSSSSD COMMON MIB (ACCESS LOG) PSSSSD COMMON MIB ( NETWORK LOG ) Protocol type of network log type Network log category... ( Network log type DISK RECORDER CATEGORY COMMON MIB EVENT LOG ) Event log type Port in the back of HD DISK RECORDER CATEGORY COMMON MIB ERROR LOG ) Error log type Error log unit Error log Disk /Channel /Port /Area /Fan DISK RECORDER CATEGORY COMMON MIB (INTERNAL ( ERROR LOG) DISK RECORDER CATEGORY COMMON MIB (HDD INFORMATION) DISK RECORDER CATEGORY COMMON MIB (REBOOT STATUS) DISK RECORDER CATEGORY COMMON MIB (CAMERA CONNECTION STATUS) DISK RECORDER CATEGORY COMMON MIB TEMPARATURE )... 39

4 5. COMMUNITY WJ-HD600 SNMP SETTINGS MIB UNDER ENTERPRISES

5 1. Introduction This document is described about a part of MIB information of WJ-HD600 series. Important: The Live image view to PC might stop for a few ten seconds when the load is put on the communication between WJ-HD600 - PC as the MIB is downloaded in bulk. However recording is continued. 2. Outline The MIB information to be implemented is Read only, and Set/Write is impossible. 5

6 2.1. MIB structure Category Object name Description Common MIB (MIB-2) System -Model No. Software version -Vender OID -The time since the network management portion of the system was last re-initialized -The contact person for this managed node -An administratively-assigned name for this managed node -The physical location of this node -A value which indicates the set of services that this entity primarily offers Interface -The of LAN interface -Index of LAN interface -Information about LAN interface -The type of LAN interface -MAC address Ip -IPv4 address -Index of interface as IPv4 address -Subnet mask of interface as IPv4 address Private MIB Panasonic SSD -vendor name -Model -Current date and time -Serial -The of user access -The of alarm -The of Access log -Access log entry -Index of Access log -The date and time of Access log -Access log type -The of Network log -Network log entry 6 -Index of Network log -The date and time of Network log -Network log type

7 Category Object name Description Private MIB HDR -The of Event log -List of Event log -Entry of Event log -Index of Event log -The date and time of Event log -Event log type -The of Error log -The Error log list -The Error log entry -Index of Error log -The date and time of Error log -Error log type -Internal error log -List of Internal error log -Entry of internal error log -Index of Internal error log -Period of Internal error log -HDD capacity -HDD hour meter -Reboot status -Camera connection 7

8 3. Common MIB(MIB-2) Important: About MIB which is not defined with this document, it is Linux standard MIB. It is not guaranteed about the contents system MIB-2= No. Object name Syntax Access OID Description Factory (Fix) default 1 sysdescr DisplayString RO MIB2.1.1 Model No. Software version e.g. (size0..255) WJ-HD600 SWVer sysobjectid ObjectIdentifir RO MIB2.1.2 Vender OID sysuptime TimeTicks RO MIB2.1.3 The time since the network 0 management portion of the system was last re-initialized. (Value x 10ms) It is not accumulation time. (0~ ) e.g. 10s is value of 1000, because 10s=1000x10ms 4 syscontact DisplayString (size0..255) 5 sysname DisplayString (size0..255) 6 syslocation DisplayString (size0..255) 7 sysservices Integer (0..127) RO MIB2.1.4 the contact person NULL for this managed node, information on *This item can be set how to contact this person from the HD600 menu on browser. RO MIB2.1.5 An administratively-assigned name for NULL this managed node. This is the node's *This item can be set fully-qualified domain name. from the HD600 menu on browser. RO MIB2.1.6 The physical location of this node. NULL *This item can be set from the HD600 RO MIB2.1.7 A value which indicates the set of 8 services that this entity primarily offers. menu on browser. 64(Fix)

9 3.2. Interface MIB2= No. Object name Syntax Access OID Description Factory default 8 ifnumber Integer RO MIB2.2.1 The of LAN interface 7 (Fix) (0..127) 9 ifindex InterfaceIndex RO MIB Index of LAN interface (1) 1 (Fix) RO MIB Index of LAN interface (2) 2 (Fix) 10 IfDescr DisplayString (SIZE (0..255)) RO MIB Information about LAN interface (1) eth0 (Fix) RO MIB Information about LAN interface (2) eth1 (Fix) 11 iftype InterfaceIndex RO MIB The type of LAN interface (1) ethernet-csmacd(6) (Fix) RO MIB The type of LAN interface (2) ethernet-csmacd(6) (Fix) 12 ifphyaddress InterfaceIndex RO MIB MAC address of eth0 MAC address of device(fix) *) Ethernet communication Ethernet port consists on management port and maintenance port. RO MIB MAC address of eth1 MAC address of device(fix) Eth0, Eth1 is a communication of HD600. 9

10 3.3. IP MIB2= No. Object name Syntax Access OID Description Factory default 13 ipadentaddr IpAddress RO MIB ipv4address IPv4 address of eth0 IP address of device (Fix) RO MIB ipv4address IPv4 address of eth1 IP address of device (Fix or DHCP address) 14 ipadentindex Integer RO MIB Index of eth0 as IPv4 address 1 (0..127).ipv4address RO MIB Index of eth1 as IPv4 address 2 ipv4address 15 ipadentnetm IpAddress RO MIB Subnet mask of this index of Subnet ask.ipv4address IPv4 address mask of device RO MIB Subnet mask of this index of Subnet.ipv4address IPv4 address mask of device 10

11 4. Private MIB 4.1. Panasonic common MIB Panasonic= No. Object name Syntax Access OID Description Factory default 1 pananceeqg eneralvendor Name DisplayString (SIZE (0..255)) RO Panasonic The vendor name of the net Panasonic appliance 2 pananceeqg DisplayString RO Panasonic The model of the net WJ-HD600 eneralmodel (SIZE appliance (0..255)) 3 pananceeqg eneraldaytim e 4 pananceeqg eneralserialn um DateAndTime RO Panasonic The current date and time set on the net appliance DisplayString RO Panasonic Serial of (SIZE The serial of the net device (0..255)) appliance 11

12 ( ) 4.2. PssSSD common MIB (common) PssSSD common MIB is shown as follows. Security common MIB is under PssSSD = PssSSD Common is described SSD.1 No. Object name Syntax Access OID Description Factory default 5 UserAccessCount Integer RO PssSSD.1.1 The of user that accesses device via 0 network (0-99) 6 AlarmSumNum Integer RO PssSSD.1.2 counting the of alarm from device 0 boot. counting for from 0 to with 32bit. When The clear of value is done with clear of error log exceed Max value, count from 0 again. /cgi-bin/levelsetup.cgi internal part It method is saved name:logreset of log clear( using CGI ) the value in SRAM. Parameter part value: 0 Error log clear for internal *) Not counting emergency recording. 12

13 4.3. PssSSD common MIB (Access log) Common log is , and there are two kinds of log. * Access log ) * Network log Network Disk Recorder has Event log and Trouble log in addition to the above Access log and Network log. Event log and Trouble log do not belong to Security common MIB, belong to HDR. PssSSD= (PssSSD is described PssSSD.1.3 No. Object name Syntax Access OID Description 7 AccLogNumber Integer RO PssSSD The of Access log ( ) Factory default 0 8 AccLogIndex Integer RO PssSSD Index of Access log (1 100) AccLogDayTim DateAndTime RO PssSSD The date and time of Access 0 e 1.2 log e.g :00:00 10 AccLogType DisyplayString (SIZE0 255) RO PssSSD Access type - User name *There is a detail as follows. 0 *Important: About Access log, Network log, Event log, and Trouble log ND400,HD600 always acquires the maximum log. (If one log remains, 0 padding and acquires the maximum. ) 13

14 Access type - Username Access Type Category Access type Access type Use/No Use No. Login/Logout Login ( Main unit, Browser common) 001 Use Logout ( Main unit, Browser common) 002 Use Picture Login(FTP) 003 No Use Logout(FTP) The 004 Config image(http) 101 Login 007 Use Config Play start back operation start for download of picture image(ftp) Logout stop Use Manual recording start stop Copy Delete Setting Camera The display control of setup image No Structure change Change HDD Camera format the setting setting from front panel Use communication 205 user management 206 Power The setting change of ON maintenance password Use Others supply Power supply event access OFF log log Refer of the return the network error log Alarm No Use restraint

15 Push operation bottom of front 407 Use Username Username Browser access user PC access user FTP access user Non displayed Value Registered username Registered username Registered username Display only Access type 15

16 ( 4.4. PssSSD common MIB ( Network log ) Neteork log is shown as fellos. PssSSD= PssSSD is described PssSSD.1.3) No. Object name Syntax Access OID Description 11 NetLogNumber Integer RO SSD The of network log (1-1000) Factory default 0 12 NetLogIndex Integer RO SSD Index of network log (1 1000) 13 NetLogDayTime DisyplayString RO SSD The date and time of network 0 (SIZE0 255) log e.g :00:00 14 NetLogType DisyplayString RO SSD Network log type 0 (SIZE0 255) Protocol type - Category - Log type *There is a detail in next page Protocol type of network log type Protocol type Protocol type No. Value Range SMTP 00 00~99 FTP 01 00~99 DDNS 02 00~99 NTP 03 00~99 SNMP 04 00~99 DHCP 05 00~99 HTTP 06 00~99 LINK_ERROR_ ~99 Other 99 00~99 16

17 Network log category Category Category No. Value Range Success 00 00~99 POP3 Error 01 00~99 SMTP Error 02 00~99 FTP Error 03 00~99 Connect Error 04 00~99 Internal Error 05 00~99 SMTPATTEST_ERR Network log type Network log type Type No. Protocol type - Category - Log type Value SMTPMAIL_SEND SMTPPOP3ADD_ERR SMTPPOP3SVR_ERR SMTPSVRADD_ERR SMTPSVR_ERR SMTPMAILFROM_ERR SMTPRCPTTO_ERR SMTPOTHER FTPCLIENT_OK FTPSVRFWD_OK FTPSVRADD_ERR FTPSVR_ERR FTPUPLOAD_ERR FTPPASSIVE_ERR FTPLOGIN_FAULT

18 Network log type Type No. Protocol type - Category - Log type Value FTPOTHER DDNSIPADDUPDATE_OK DDNSSVRRES_ERR DDNSUSERPASS_ERR DDNSIPADDUPDATE_ERR NTPSETTIME_ERR DDNSOTHER NTPGETTIME_OK NTPSVRADD_ERR NTPTIME_INVALID NTPSVRRES_ERR NTPOTHER SNMPOBJ_ERR SNMPOTHER DHCPOTHER HTTPUSERPASS_ERR HTTPDOWNLOAD_ERR HTTPDREQUEST_ERR HTTPOTHER CONFIG <DHCP>DUPLICATE_IP_ADD LOGIN <SMTP>SMTP_ATTEST_ERR SNMPUSERPASS_ERR DHCPIPADD_OK DHCPIPADDUPDATE_ERR ND400, HD600 addition item Network log contents type: No.58 No.59 18

19 4.5. Disk Recorder Category common MIB ( Event log ) Event log is shown as fellows. Event log is Disk Recorder Category (HdrCategory) common MIB as PssSSD common MIB. HdrCategory = Factory No. Object name Syntax Access OID Description default 15 evtlognumber Integer RO HdrCategory.1.3 Event log (1-750) 0 16 evtlogindex Integer RO HdrCategory Index of Event log (1 750) 17 evtlogdaytime DisyplayString RO HdrCategory The date and time of event log 0 (SIZE0 255) e.g :00:00 18 evtlogtype Integer RO HdrCategory Event log type - Ch No,/Alarm In port No Event log type Event log type Type No. Event type Channel No. Use/No use Value Alarm out No, VMD 0 00 Channel No Use LOSS SD-LOST 1 01 Channel No Use TRM SD-ERROR Back port (1-16) Use COM 3 03 Channel No, Use EMR fixed Use SCD 5 05 Channel No Use HDDy ON/OFF ***( ) 06 Channel No No Use 07 Channel No No use CAM 8 08 Channel No, Use EXT START ( ) ( ) fixed Use EXT STOP fixed Use HDD Push count No use SD START fixed No use SD ABORT 13 SD END fixed No use 13 0 fixed No use 19

20 CMTN: CRMV:AVMD AVMD Detection) INTRUDER 15 (Object abandonment/removal) REMOVAL CSTY:AVMD (Intrusion CDRT: CTRN ( terminal SABOTAGE CAM Alarm) EXT Channel Channel Channel Channel 15 Channel No, Use No, Use No, Use No, Use No, Use 20

21 Port in the back of HD600 Type Alarm port Port No assignment 0 in the back Port 1 1 of HD600 Port 2 2 Port 3 3 Port 4 4 Port 5 5 Port 6 6 Port 7 7 Port 8 8 Port 9 9 Port Port Port Port Port Port Port

22 4.6. Disk Recorder Category common MIB ( Error log ) Error log is Disk Recorder Category (HdrCategory) SSDHDR.1.5 common MIB as PssSSD common MIB. HdrCategory= SSDHDR Factory No. Object name Syntax Access OID Description SSDHDR default 19 ErrLogNumber Integer RO SSDHDR The of error log (1-100) 0 20 errlogindex Integer RO SSDHDR Index of Error log (1 100) SSDHDR ~ 21 errlogdaytime DisyplayString RO SSDHDR The date and time of Error log 0 (SIZE0 255) e.g :00:00 22 errlogtype DisyplayString RO Error log type 0 (SIZE0 255) Error type - Unit - Disk /Channel No./Port No./Area /Fan *)reference as fellows 22

23 Error log type Category Error type description Error type Unit HDD HDD Write error 001 Unit HDD Read error 002 Unit Copy Media write error 003 Unit HDD HDD SMART warning 004 Unit hour meter warning 005 Unit Remain capacity warning 006 Area Event recording area 008 Area capacity full Copy1 drive full 010 Unit Remove auto links (per 016 Unit HDD) RAID5 recovery failure 018 Unit Remove auto links (per unit) 019 Unit Copy media read error 023 Unit RAID5 1 DOWN 026 Unit 23 RAID5 2 DOWN 027 Unit Disk /Channel Others No./Port No./Area /Fan Disk Disk 0 (fixed) Unit Number SD=201 DVD=202 Disk Display disk on the Raid Disk Remain capacity Remain capacity (0) 0 Fixed Unit Number SD=201 DVD=202 Disk 0 fixed 0 fixed 0 fixed Unit Number SD=201 DVD=202 0 fixed 0 fixed

24 Skip HDD(per HDD) 029 Unit Disk Single mode format failure Disk HDD remove error Disk RAID6 recovery failure 034 Unit 0 fixed RAID6 1 DOWN 035 Unit 0 fixed RAID6 2 DOWN 036 Unit 0 fixed RAID6 3 DOWN 037 Unit 0 fixed SKIP HDD(Unit ) 038 Unit 0 fixed RAID5 format failure 039 Unit 0 fixed RAID6 format failure 040 Unit 0 fixed Partition error (HDD) 041 Unit Disk Partition error (unit) 042 Unit Disk NW Fan error 101 Unit Fan Thermal trouble fixed 0 fixed Power failure detection fixed 0 fixed Power failure recovery fixed 0 fixed Reboot by system error fixed 0 fixed The detection of recording fixed 0 fixed aberrance( by AGENT) The detection of recording aberrance( by RCA) fixed 0 fixed Video loss detection fixed Channel No. 24 Video loss recovery fixed Channel No. Cannot resolve original notification from DNS fixed Channel No.

25 No response of original notification The other error of original notification fixed Channel No fixed Channel No. Data Error fixed Channel No Error log unit Type Unit No Unit assignment 000 Main unit 001 Extension unit1 101 Extension unit2 102 Extension unit3 103 Copy drive1(sd) 201 Copy drive2(dvd)

26 26

27 Error log Disk /Channel /Port /Area /Fan Disk No. Type No Disk assignment Disk No Extension (Used on RAID5/RAID6) Main unit1 1 Main unit2 2 Main unit3 3 Main unit Extension Extension Extension unit

28 28

29 Channel No Camera1 assignment Type of camera Value 01 Remarks Camera2 Camera3 Camera4 2 Camera5 3 Camera6 4 Camera7 5 Camera8 6 Camera9 7 Camera10 8 Camera Camera12 Camera13 Camera14 12 Camera Camera16 N N NW Port Type Port No assignment 0 Network port 1 Maintenance port 2 Area Type Area No assignment area 0 Normal area 1 Event area 2 29 Fan No assignment fan 0 Type Fan

30 Fan2 2 Fan3 3 Fan4 4 30

31 SSDの 障 害 ログを 下 記 に 示 す 障 害 ログはSSD 標 準 MIBのサブツリーであるHDR 分 野 共 通 MIBとなっている 4.7. HDR Standard MIB( Internal error log) IntErrLogNumb MIB name Syntax Access Object er ID HdrCategory= IntErrLogIndex Integer SSDHDR.1.11 log(1- total 200 ) of internal error 0( count T.B.D) (1 200) RO SSDHDR Description Factory default ~ The SSDHDR ~200 :log of each log NULL IntErrLogType DisplayString (SIZED 255) RO SSDHDR ~ It SSDHDR define is defined structure correspond to the log NULL

32 category It shows that the is data sub that tree is of related SSD standard to HDD MIB. of SSD as follows. The data of relational HDD is common MIB of HDR 4.8. Disk Recorder Category common (Reboot status) No. 1 HDD MIB name syntax String RO Access OID HdrCategory= ~SSDHDR HDD condition capacity connection Factory Description 1.31 *1~31 HDD *When. RAID, is correspond it is same to above. each 500 default In disk Disk case capacity(unit:gb) of normal operation ADD Ex: 500 ADD Disk display GB LOST REMOVE LOST dislay disk No REMOVE display connection disk Disk - * display GB USED replace ERROR USED display Disk HDD ERROR display capacity Disk condition *1~31 is correspond connectio to each n HDD *When. RAID, it is same above. 500 Integer RO 11.1 ~SSDHDR

33 No. 2 HourMeterXX MIB name syntax String RO Access OID 2.1 ~SSDHDR Description 2.31 Integer RO 12.1 ~SSDHDR Normal Disk Ex.:250 capacity(unit:gb) operation 250 Disk ADD LOST ADD Disk Ex:LOST Disk REMOVE Ex:REMOVE disk No Ex:- connection Disk USED Ex:* replace Ex:USED Disk ERROR Ex:ERROR Disk Used *1~31 HDD time is correspond of HDD (1~99999) *When. RAID, it is same to above. each 0 h Normal Disk Ex: 125 capacity(unit:time) operation h disk Used Other - time h case *1~31 HDD is correspond of HDD (1~99999) *When. RAID, it is same to above. each 0 h Normal Disk Ex.: 125 capacity(unit:time) operation h disk Other case 125 Factory default

34 34 Ex: - h

35 No. 3 HDDGList MIB name syntax Sring RO Access OID 3.1 ~SSDHDR Description 3.31 Integer RO 13.1 ~SSDHDR No. 4 HDDSmart MIB name syntax String RO Access OID 4.1 ~SSDHDR Description 4.31 Integer RO ~SSDHDR The 0000~FFFF) 1~31 is of correspond G-List(Hex Normal each HDD operation disk or to 0 Other REMOVE Ex.: 001A disk The - case 0000~FFFF) 1~31は 各 of HDD G-List(Hex 1~31 HDD is correspond 番 号 に to 対 each 応 0 Normal REMOVE Ex.: 001A disk operation disk or Other Ex.: - case SMART 1~31 Warning is correspond condition Normal each HDD operation disk or to 0 warning REMOVE 0 :SMART disk 1 :SMART with warning without SMART Other - warning case 1~31 is correspond condition Normal each HDD operation disk or to 0 Factory default Factory default

36 14.31 REMOVE 0 :SMART disk 1 :SMART without warning Other case

37 RAID5/6ともに No. MIB どのHDDであるかの name 運 用 で1ダウン 2ダウン 3ダウンしたHDDが 正 常 syntax 識 HDDかダウンHDDであるか 別 は 行 String RO Access わない 表 示 する 5 HDDSingleRaid OID 5.1 ~SSDHDR Operation 1~31 is condition correspond to Description 5.31 Normal each HDD operation REMOVE 0 :Single disk disk or with 1 :RAID5/6 2 :RAID5/6 properly HDD Other with down case HDD operation Integer RO ~SSDHDR Operation 1~31 is condition correspond to Normal each HDD operation REMOVE 0 :Single disk disk or with 1 :RAID5/6 2 :RAID5/6 properly HDD Other with down case HDD operation Factory default 37

38 4.9. Disk Recorder Category common MIB (Reboot status) Reboot status is Disk Recorder Category (HdrCategory) common MIB as PssSSD common MIB No. Object name Syntax Access OID Description Factory default 1 rebootrequest Integer RO HdrCategory.1.14 It is shown whether reboot is 0 necessary. 0:Normal state (reboot not need) 1.State of reboot demand (Fixed 0 in WJ-HD600) Disk Recorder Category common MIB (Camera connection status) Camera connection status is Disk Recorder Category (HdrCategory) common MIB as PssSSD common MIB HdrCategory= No. Object name Syntax Access OID Description Factory default 1 CamSvncState Integer RO HdrCategory HdrCategory : connect 1: Not connect Index 1-16 is Camera channel. - 38

39 4.11. Disk Recorder Category common MIB ( Temparature ) Temparature is Disk Recorder Category (HdrCategory) common MIB as PssSSD common MIB. HdrCategory= No. Object name Syntax Access OID Description I 1 Temperature String RO HdrCategory.1.16 Temperature of HD600 (The second place of the decimal point is rounded off) * J/G model :degrees centigrade * P model :degrees Fahrenheit e.g deg C deg F Integer RO HdrCategory * J/G model Temperature of HD600 (The first place of the decimal point is rounded off) e.g.:38.4 deg C -> 38 Integer RO HdrCategory * J/G model Temperature of HD600 (The second of the decimal point is rounded off, and do 10 times) e.g.:38.39 deg C -> 384 Integer RO HdrCategory * P model Temperature of HD600 (The first place of the decimal point is rounded off) e.g.:101.1 deg F -> 101 Integer RO HdrCategory * P model Temperature of HD600 (The second of the decimal point is rounded off, and do 10 times) e.g.:101.09eg F ->

40 5. Community In setup menu of WJ-HD600, the user can set the community name. The default value is NULL. 6. WJ-HD600 SNMP settings The capital letter and the small letter are distinguished. WJ-ND400 Object name Description Factory Max length SNMP settings default Community Community name Public 32 System name SysName Name for this managed node. This is the node's NULL 255 fully-qualified domain name. Location Sys Location The physical location of this node. NULL 255 Contact SysContact the contact person for this managed node, information on how to contact this person NULL MIB under Enterprises It is fix value. OID Name Description 258 Panasonic Panasonic 5100 System network company System network Company Security & Sound Systems Business Unit 200 Disk Category Disk Category 40