How To Get A Degree In Korea

Transcription

1 POSTGRADUATE PROSPECTUS 2015/2016

2 2 TABLE OF CONTENTS Foreword By The Vice Chancellor Foreword By The Dean About UTeM Centre For Graduate Studies Summary of Programmes Offered Graduate Programme By Research I. Doctor of Philosophy (PhD) II. Doctor of Engineering (DEng) III. Doctor of Information Technology (DIT) IV. Master of Science Master Programme By Mixed Mode Master Programme By Taught Course Entry Requirements Fees Financial Assistance Faculties Faculty of Electrical Engineering Faculty of Electronics And Computer Engineering Faculty of Manufacturing Engineering Faculty of Mechanical Engineering Faculty of Information & Communication Technology Faculty of Technology Management & Technopreneurship Institute of Technology Management & Entrepreneurship Application For Admission

3 Postgraduate Prospectus 2015/ FOREWORD

4 2 FOREWORD BY THE VICE CHANCELLOR First and foremost, all praise to Allah, the Almighty and the Benevolent for His blessing, has allowed us, once again to publish the Postgraduate Prospectus for 2014/2015 edition. Let me take this opportunity to wish all readers a warm welcome to Universiti Teknikal Malaysia Melaka (UTeM), the first Technical Public University in Malaysia. As a Focus University, UTeM s strengths are in the engineering and technology programmes comprising of several fields of Engineering, Engineering Technology, Information Technology, Technology Management and Technoprenuership. Over the years, UTeM has built a reputation as the source of highly skilled engineering and technology graduates with the capability of meeting the requirements of strategic industries and SMEs. UTeM has also established research competencies in focused areas that have been identified as the key to enhancing the University s unique disposition and supporting the nation s inclination towards Green Technology, Systems Engineering, Human-Technology Interaction and Emerging Technology. As Malaysia gears towards the status of a developed country in 2020, UTeM strives its best to generate a conducive academic environment that will facilitate the development of highly competent and creative graduates. Besides leveraging on internal resources, UTeM has also formed several strategic alliances with industries and higher educational institutions, both locally and abroad. Partnership with the government agencies, business and industry players are sealed in many forms such as through scholarships and prizes, research funding and collaborations, consultancies, product testing and development and staff training. UTeM Main Campus covers a land area of more than 725 acres in the edge of the bustling historical city of Melaka. Located in three () campuses namely the Main Campus, Technology Campus and City Campus, the students, staff and visitors enjoy a peaceful, eco-friendly environment, with easy proximity to one of the state s fastest-growing metropolitan areas. The campus features a thoughtful balance of buildings and lush greeneries. The campus offers students excellent and modern facilities as an opportunity for students to interact with one another as well as to explore and exchange ideas of mutual interests. Learning experience at UTeM extends far beyond the parameters of lecture rooms and laboratories. At UTeM we are committed to strive towards excellence in line with our tagline Always a Pioneer, Always Ahead. Prof. Datuk Dr. Shahrin bin Sahib Vice Chancellor Universiti Teknikal Malaysia Melaka

5 Postgraduate Prospectus 2015/2016 FOREWORD BY THE DEAN Universiti Teknikal Malaysia Melaka (UTeM) is acclaimed as the first Technical Public University set within a beautifully landscaped campus located 20km from the historical city of Melaka. There are seven faculties and one institute covering the areas of Electrical Engineering, Electronics and Computer Engineering, Mechanical Engineering, Manufacturing Engineering, Information and Communication Technology, Technology Management and Technopreneurship and Engineering Technology. The graduate study programmes at UTeM provides unique and challenging opportunities for fresh graduates as well as those who are employed to seek and broaden their knowledge in the various engineering, information and communication technology as well as technology management. Designed within the framework of the requirements of the Malaysian Qualification Agency, the programmes will equip the students with the necessary engineering and technical knowledge and skills, complemented with adequate exposure in the management and entrepreneurial topics. This would enable them to become competent professionals adaptive to the fast evolving and competitive business world. Trained (mostly with PhD qualifications) and experienced staff will facilitate the teaching and learning processes as well as the supervision of research work. The equipment and machinery, and ICT facilities available at the university will adequately support the research and innovation activities that are featured in the various graduate programmes. Students and staff of UTeM come from countries with different ethnic and cultural backgrounds, all working amicably in a conducive teaching and learning environment. The Centre for Graduate Studies will enhance this global educational environment with educational and recreational activities that can bring students together. The prospectus provides a concise compilation of information on graduate study opportunities available at UTeM that will interest prospective students. Please take the time to visit our website at for more information. Assoc. Prof. Dr. Zulkifilie Bin Ibrahim Dean, Centre for Graduate Studies Universiti Teknikal Malaysia Melaka

6

7 Postgraduate Prospectus 2015/ ABOUT UTeM

8 6 Vision To Be One of the World s Leading Innovative and Creative Technical Universities Mission UTeM is determined to lead and contribute to the wellbeing of the country and the world by: 1. Promoting knowledge through innovative teaching & learning, research and technical scholarship; 2. Developing professional leaders with impeccable moral values;. Generating sustainable development through smart partnership with the community and industry. Motto Excellence Through Competency General Educational Goals 1. To conduct academic and professional programmes based on relevant needs of the industries. 2. To produce graduates with the following attributes; having the relevant knowledge, technical competency, soft skills, social responsibility and accountability.. To cultivate scientific method, critical thinking, creative and innovative problem solving and autonomy in decision making amongst graduates. 4. To foster development and innovation activities in collaboration with industries for the prosperity of the National. 5. To equip graduates with leadership and teamwork skills as well as develop communication and life-long learning skills. 6. To develop technopreneurship and managerial skills amongst graduates. 7. To instill an appreciation of the arts and cultural values and awareness of healthy life styles amongst graduates.

9 Postgraduate Prospectus 2015/ CENTRE FOR GRADUATE STUDIES The Centre for Graduate Studies (PPS) of Universiti Teknikal Malaysia Melaka (UTeM) was established to further enhance the contributions in the area of engineering, technology and management through rigorous and dedicated academic research. The research activities at UTeM are geared towards the combinations of applied industrial and academic excellence. PPS strives to provide higher degree education that is of high quality and relevant to the needs of the varied participants on the range of programmes offered. The ability to respond to participant s need is facilitated by a programme structure, which permits the maximum flexibility consistent with the maintenance of academic requirements and standards with an emphasis on close professional relationships between staff and students within the Centre. It is part of an academic community, which prides itself on an outstanding services and facilities. In the spirit of supportive fraternity, all students, regardless of creed and background, benefit from the challenges and opportunities presented by such environment. The roles and functions of PPS are: To facilitate and manage the offering of the graduate programmes, which are innovative and relevant to the current and future market demands. To develop and enhance the quality of the graduate programmes for recognition and meeting the accreditation requirements. To become a one stop and leading centre for all information that relates to the graduate study programme at this university. To act as the catalyst to the development of the graduate studies programme and to be responsible in promoting the graduate studies programme. To increase the intake of the graduate students to the ratio of at least 10% of the total number of student enrolment through intensive activities and promotion, client-friendly procedures and attractive financial aid schemes. To make the graduate studies programme a major channel toward the increase of research and development activities. To become the main choice of students through the improvement of quality, infrastructure and conducive environment in UTeM graduate studies programme with international recognition and accreditation.

10 8 SUMMARY OF PROGRAMMES OFFERED Faculty/ Institute Programmes Offered Electrical Engineering Electronics and Computer Engineering Mechanical Engineering Manufacturing Engineering Information and Communication Technology Technology Management and Technopreneurship Institute of Technology Management and Entrepreneurship Doctor of Philosophy (PhD) Industrial PhD (DEng, DIT) Master By Research Master By Mixed Mode Master By Taught Course

11 Postgraduate Prospectus 2015/ GRADUATE PROGRAMME BY RESEARCH

12 10 I. DOCTOR OF PHILOSOPHY (PhD) The Doctoral candidate by research is supervised by an academic staff (or a panel of supervisors) from the faculty. The directed research work will focus on a particular subject that introduces candidate to the processes by which new knowledge is developed or/and applied accordingly. The specific topic of investigation will be agreed upon by the supervisor (or panel of supervisors) and the candidate. The academic progress of a candidate is assessed through a research. Progress report is submitted at the end of each semester. The degree is awarded based on an oral examination (viva-voce) of the thesis submitted by the candidate on completion of the study. Candidates intending to study by research may submit their application for admission throughout the year. Programmes Offered: Electrical Engineering Electronic Engineering Mechanical Engineering Manufacturing Engineering Information and Communication Technology Technology Management Entrepreneurship Technical Communication Industrial Counseling Human Resource Development Mode of Registration Duration (years) Full Time 2-6 Part Time -8 Programme Structure Compulsory Subject Subjects Credit Hours Research Methodology University Elective Subjects (Choose One) Entrepreneurship Engneering & Technology Management Project Management Quality Systems Management Thesis 84 Total Credit hours 90

13 II. DOCTOR OF ENGINEERING (DEng) Postgraduate Prospectus 2015/ The Doctor of Engineering (DEng) is a 4 years doctoral level programme combining academic research and scholarship with industrial problem-solving and project management. The programme incorporates the industrial relevant research, team leadership and unique university-industry partnership. The academic degree awarded on the basis of advanced study and research in engineering is equivalent to a PhD degree in engineering/ applied sciences. The innovative research output from the programme is expected to be immediately useful to the participating company. The DEng programme offers an opportunity for outstanding engineers to enhance their qualification through a mix of broadly based technical and professional training while completing an industry based research project. Successful researchers after completing the programme not only graduate with a title Doctor of Engineering, but also with the important mix of professional skills, technical knowledge and research experience that will enable them to progress to senior positions within industry at an acceleration rate. Participating Faculties: Faculty of Electrical Engineering Faculty of Electronics and Computer Engineering Faculty of Mechanical Engineering Faculty of Manufacturing Engineering Mode of Registration Duration (years) Full Time -8 Entry Requirements: 1. A Master degree (or equivalent) from any institution of higher learning recognized by the Malaysian Government with CGPA of at least 2.75; AND 2. Have at least years of working experience AND. Has obtained the approval from employer to accommodate the research project in the workplace OR 4. A Master degree student who has obtained Senate approval to enroll for the programme Programme Structure DEng programme consists of two components, i.e. taught course and research. Components Taught Course Research - Modules are designed to enhance candidates knowledge in the related Engineering and Business Management subjects - Based on real industrial problems Particular

14 12 Taught Course: Candidates in this programme are expected to undertake 18 credit hours of subjects. The following is the proposed schedule of the taught component: Components Course Work Year 1 Year 2 Year Sem Sem Sem Sem Sem Sem credits credits credits credits credits credits Course Work Subjects: Research Depending on the faculty at which the student is based the subjects consist of the following: University Compulsory Subjects (2 Subjects) PPSW 601 Research Methodology PPSW 602 Entrepreneurship PPSW 60 Engineering and Technology Management PPSW 605 Quality Systems Management PPSW 607 Project Management Faculty Subjects (4 Subjects) Faculty of Electrical Engineering - 4 master level subjects Faculty of Electronic & Computer Engineering - 4 master level subjects Faculty of Manufacturing Engineering - 4 master level subjects Faculty of Mechanical Engineering Research - Based on real industrial problems - Research will be carried out in the industry - Submit research thesis at the end of study Research: The candidate will normally be advised by one academic supervisor and one industrial supervisor. The topic for the research will be jointly decided by the faculty and the participating company. It can be a single project, or a series of projects, firmly based on a real industrial problem and having significant challenging and innovative engineering content. The candidate will spend majority of his/her time (about 80%) with the collaborating company.

15 III. DOCTOR OF INFORMATION TECHNOLOGY (DIT) Postgraduate Prospectus 2015/ Doctor of Information Technology offers a unique ½ year program that consists of coursework (7 modules) and research studies to extend fundamental knowledge of information and communication technology in solving industrial relevant problems. During the research studies, candidate is supervised by an academic staff from the university and an industrial supervisor from the related research field. The directed research work will focus on an industrial problem that engages the candidate in industry-based problem solving by which new knowledge is developed or/and applied accordingly. The supervisor (or panel of supervisors), the industry supervisor and the candidate will select the topic of investigation. The academic progress of the candidate is assessed through assignments, written tests, and research progress report throughout the studies. The degree is awarded based on the completion of coursework, and an oral examination (viva-voce) of the thesis submitted by the candidate on completion of the study. Interested candidates may submit their application for admission throughout the year. Successful candidates should begin their studies in common semester according to the university academic calendar. Areas of Research: Computational Intelligence and Technologies Computational Modelling and Optimisation Immersive Technology and Wearable Computing Information Security and Digital Forensics Geoinformation System and Database Biomedical computing and Engineering Technologies Advanced Networking and Distributed System Software Engineering Mode of Registration Duration (years) Full Time 1/2-8 Entry Requirements: 1. A Master degree (or equivalent) from any institution of higher learning recognized by the Malaysian Government with CGPA at least 2.75; AND 2. At least a degree (either the Bachelor Degree of the Master Degree) in Computing; AND. A working employee in an industry with at least 2 years of experience and has obtained the approval from employer to accommodate the research project in the workplace

16 14 Programme Structure: Candidate should complete 91 credits of graduation requirement in phases as follows: P1 : Course Work Sem 1 9 credits Year 1 Year 2 Year Year Sem Sem Sem Sem Sem Sem Sem credits P2 : Research Preparation 14 credits P : Research 14 credits 14 credits 14 credits 14 credits Curriculum Structure (Coursework) : Year 1 (Semester 1) Course Name Credit 1 2 Research Methodology (University Compulsory Subject) Faculty Compulsory Subject (Elective 1)** Specialization Subject (Elective 1)*** TOTAL 9 Year 1 (Semester 2) Course Name University Elective Subject* Faculty Compulsory Subject (Elective 2)** Specialization Subject (Elective 2)*** Specialization Subject (Elective )*** TOTAL Credit 12 * University Elective Subject (Choose 1 only) ** Faculty Compulsory Subject (Choose 2 only) *** Specialization Subject (Choose only from the same specialization)

17 Postgraduate Prospectus 2015/ University Subjects Module Compulsory Elective (Choose 1 Only) Subject Research Methodology Entrepreneurship Project Management Quality System Management Engineering & Technology Management Credit Faculty Compulsory Subjects Module Compulsory Elective (Choose 2 Only) Subject Theory of Computation Computer Architecture & Compiler Advanced Data Communication & Networks Advanced Software Engineering Business Intelligence Credit Specialization Subjects: Information and Software Engineering Module Elective (Choose Only) Subject Requirements Engineering Current Trend of Database Technology Mobile Database Data Warehousing and Data Mining Knowledge Management Credit Specialization Subjects: Networking Module Elective (Choose Only) Subject Advanced Scalable Internetworking Advanced High Performance Network Advanced Network Design & Diagnostic Distributed Computing System Computer Forensic Credit

18 16 Specialization Subjects: Intelligent System and Soft Computing Module Elective (Choose Only) Subject Artificial Intelligence Advanced Soft Computing Advanced Evolutionary Computing Advanced Artificial Intelligence in Manufacturing Advanced Image processing and Pattern Recognition Special Topic in Intelligent System And Soft Computing Credit Specialization Subjects: Computational Modelling Module Elective (Choose Only) Subject Mathematical Modeling and Simulation Computational Optimization Advanced Numerical Methods Special Topic in Computational Modelling Credit Specialization Subjects: Visualisation and Immersive Technology Module Elective (Choose Only) Subject Computer Graphics and Visualizations Mobile Application Development Multimedia Information Retrieval Advanced Human Computer Interaction Credit

19 IV. MASTER OF SCIENCE Postgraduate Prospectus 2015/ The Master of Science candidate is supervised by an academic staff (or a panel of supervisors) from the faculty. The directed research work will focus on a particular subject that introduces candidates to the processes by which new knowledge is developed or/and applied accordingly. The specific topic of investigation will be agreed upon by the supervisor (or panel of supervisors) and the candidate. The academic progress of a candidate is assessed through a research. Progress Report submitted at the end of each semester. The degree is awarded based on an oral examination (viva-voce) of the thesis submitted by the candidate on completion of the study. Candidates intending to study by research may submit their application for admission throughout the year. Programmes Offered: Electrical Engineering Electronic Engineering Mechatronic Engineering Mechanical Engineering Manufacturing Engineering Information and Communication Technology Technology Management Entrepreneurship Technical Communication Industrial Counseling Human Resource Development Mode of Registration Duration (years) Full Time Part Time Programme Structure Module Subject Credit Compulsory Subject University Elective Subjects (Choose One) Research Methodology Entrepreneurship Engineering & Technology Management Project Management Quality Systems Management Thesis Total Credit hours 0 6

20

21 Postgraduate Prospectus 2015/ MASTER PROGRAMME BY MIXED MODE

22 20 At the moment the Master Programme by Mixed Mode is exclusively offered by the Faculty of Electrical Engineering and Faculty of Mechanical Engineering. Mixed Mode refers to the combination of taught course and research activities. The assessment depends upon both the coursework and dissertation (research work). The component for the coursework is 50% and the dissertation contributes the other 50%. The Mixed Mode program develops the research skill of the students on top of enhancing the theoretical knowledge of the subject area. Programmes Offered: Master of Electrical Engineering Industrial Power Power Electronics and Drives Control and Robotics Master of Mechanical Engineering Applied Mechanics Energy Automotive Mode of Registration Duration (years) Mode of Registration Duration (years) Full Time Part Time 2- - Full Time Part Time Master of Electrical Engineering (Industrial Power) Master of Electrical Engineering (Power Electronics and Drives) 1 st Semester (Taught Courses) Credit 1 st Semester (Taught Courses) Credit Research Methadology Power Quality & Energy Efficiency Advanced Control Systems Power System Modelling Research Methadology Power Quality & Energy Efficiency Advanced Control Systems Electrical Motor Drives 2 nd Semester (Taught Courses) 2 nd Semester (Taught Courses) Engineering and Technology Management Power System Protection & Stability Power System Operation and Control Engineering and Technology Management Advanced Power Electronics Converters Intelligent Electrical Motor Drives rd & 4 th Semester (Research) rd & 4 th Semester (Research) Dissertation Total Credit Hours Dissertation Total Credit Hours 21 42

23 Master of Electrical Engineering (Control and Robotics) Postgraduate Prospectus 2015/ Master of Mechanical Engineering (Applied Mechanics) 1 st Semester (Taught Courses) Credit 1 st Semester (Taught Courses) Credit Research Methadology Power Quality & Energy Efficiency Advanced Control Systems Modern Control Design 2 nd Semester (Taught Courses) Engineering and Technology Management Mechanical System Design Engineering Modeling & Simulation Advance Material Engineering 2 nd Semester (Taught Courses) Engineering and Technology Management Industrial Robotics Stochastic Control Systems Research Methodology Failure Mechanics Crashworthiness and Impact rd & 4 th Semester (Research) rd & 4 th Semester (Research) Dissertation Total Credit Hours Dissertation Total Credit Hours Master of Mechanical Engineering (Energy) Master of Mechanical Engineering (Automotive) 1 st Semester (Taught Courses) Credit 1 st Semester (Taught Courses) Credit Engineering and Technology Management Mechanical System Design Engineering Modeling & Simulation Energy Management System Engineering and Technology Management Mechanical System Design Engineering Modeling & Simulation Noise, Vibration & Harshness 2 nd Semester (Taught Courses) 2 nd Semester (Taught Courses) Research Methodology Renewable Energy Energy Technology Research Methodology Vehicle Power Train System Intelligent Vehicle Dynamics Control rd & 4 th Semester (Research) rd & 4 th Semester (Research) Dissertation Total Credit Hours Dissertation Total Credit Hours 21 42

24

25 Postgraduate Prospectus 2015/ MASTER PROGRAMME BY TAUGHT COURSE

26 24 The Master programme by Taught Course (or coursework) is designed to extend the knowledge and skills gained from the first degree and to develop new professional skills of the graduates in the particular area of study. The programme involves lectures, seminars and project work. A minimum of 40 credit hours of taught subjects and a research report and a final Cumulative Grade Point Average (CGPA) of at least.0 are required for the award of the Master degree. The credit hour which comply with the Malaysia Qualification Agency (MQA), of study comprise a combination of compulsory subjects, electives and a Master s Project. Assessments are made through take home assignments, tests and final semester examinations. Students progress and performance in the Master project is assessed through oral presentations and a written report. Faculty of Electronics and Computer Engineering: Programmes Offered Master of Electronic Engineering Telecommunication Systems Electronic Systems Computer Engineering Mode of Registration Duration (years) Full Time Part Time Faculty of Mechanical Engineering: Programmes Offered Master of Mechanical Engineering Structure Mechanics Energy Engineering Automotive Product Design Mode of Registration Duration (years) Full Time Part Time

27 Postgraduate Prospectus 2015/ Faculty of Manufacturing Engineering: Programmes Offered Master of Manufacturing Engineering Manufacturing System Engineering Quality System Engineering Industrial Engineering Precision Engineering Mode of Registration Duration (years) Full Time Part Time Faculty of Information and Communication Technology: Programmes Offered Master of Computer Science Internetworking Technology Database Technology Software Engineering and Intelligence Security Science Multimedia Computing Mode of Registration Duration (years) Full Time Part Time Faculty of Technology Management & Technopreneurship: Programmes Offered Master of Business Administration Advanced Operations Management Technology and Innovation Management Mode of Registration Duration (years) Full Time Part Time

28 26 Faculty of Electronics and Computer Engineering Programme Structure 1(i) Master of Electronic Engineering (Programme Core Subjects) TELECOMMUNICATION SYSTEM Subjects Research Methodology Engineering and Technology Management Advanced Digital Signal Processing Advanced Electronic Design Advanced TCP/IP Network Wave Propagation Antenna Design Microwave and RF Circuit Design Project I Project II Programme Core Credit Hours Credit Hours ELECTRONIC SYSTEM Subjects Research Methodology Engineering & Technology Management Advanced Digital Signal Processing Advanced Electronic Design Advanced TCP/IP Network Digital Control Artificial Intelligence Advanced Power Electronics Project I Project II Programme Core Credit Hours Credit Hours COMPUTER ENGINEERING Subjects Research Methodology Engineering & Technology Management Advanced Digital Signal Processing Advanced Electronic Design Advanced TCP/IP Network Computer Architecture Embedded Software Design Digital VLSI Design Project I Project II Programme Core Credit Hours Credit Hours 4 6 4

29 1(ii) Master of Electronic Engineering (Course Core Subjects) Student has to choose two course core modules only for each specialization Postgraduate Prospectus 2015/ TELECOMMUNICATION SYSTEM Subjects Advanced Digital Communication Satellite Communication Broadband Wireless Communication Optical Communication Credit Hours ELECTRONIC SYSTEM Advanced Control Discrete Event System Sensor Technology Embedded System Design Subjects Credit Hours COMPUTER ENGINEERING Subjects Mixed Analog Signal VLSI Design IC Testing Embedded System Design Distributed and High Performance Computing Credit Hours

30 28 Faculty of Mechanical Engineering Programme Structure 2(i) Master of Mechanical Engineering (Energy Engineering) Compulsory Subject University Elective Subjects (choose one) Faculty Core Programme Core Programme Electives (choose one) Subjects Research Methodology Entrepreneurship Engineering & Technology Management Project Management Quality Systems Management Mechanical System Design Numerical Analysis Master Project Advanced Heat Transfer Monitoring & Verification Energy Management Renewable Energy Technology Computational Fluid Dynamics Bio-Fuel Technology Waste Heat Recovery Small Scale Electric Hydro Total Credit hours Credit Hours (ii) Master of Mechanical Engineering (Structure Mechanics) Compulsory Subject University Elective Subjects (choose one) Faculty Core Programme Core Programme Electives (choose two) Subjects Research Methodology Entrepreneurship Engineering & Technology Management Project Management Quality Systems Management Mechanical System Design Numerical Analysis Master Project Elastic and Plastic Theory Finite Element Analysis Structural Dynamic Advanced Material Engineering Structural Impact Mechanics Experimental Stress Analysis Structural Health Monitoring Mechanics of Composite Materials Fatigue & Fracture Mechanics Corrosion & Protection Total Credit hours Credit Hours 10 40

31 2(iii) Master of Mechanical Engineering (Automotive) Postgraduate Prospectus 2015/ Compulsory Subject University Elective Subjects (choose one) Faculty Core Programme Core Programme Electives (choose two) Subjects Research Methodology Entrepreneurship Engineering & Technology Management Project Management Quality Systems Management Mechanical System Design Numerical Analysis Master Project Green Technology Vehicle Vehicle Electrical & Electronics System Intelligent Vehicle Control Noise, Vibration & Harshness Automotive Human Factor Emission Control Technology Vehicle Power Train and Driveline Vehicle Breaking System Tyre Behaviour & Performance Control Advanced Vehicle Dynamics Total Credit hours Credit Hours (iv) Master of Mechanical Engineering (Product Design) Compulsory Subject University Elective Subjects (choose one) Faculty Core Programme Core Programme Electives (choose two) Subjects Research Methodology Entrepreneurship Engineering & Technology Management Project Management Quality Systems Management Mechanical System Design Numerical Analysis Master Project Computer Aided Engineering Time Compression Technologies Fatigue & Fracture Mechanics Thermal System Design Industrial & Design Engineering Human Factors in Design Product Reliability & Integrity Design for Manufacturing and Assembly Total Credit hours Credit Hours

32 0 Faculty of Manufacturing Engineering Programme Structure (i) Master of Manufacturing Engineering (Programme Core Subjects) Subjects Sustainable Product Design and Manufacturing Advanced Manufacturing Process Management of Global Manufacturing Operation Engineering Optimization Master Project 1 Master Project 2 Seminar on Manufacturing Engineering *HW=Compulsory Attendance Credit Hours 6 *HW (ii) Master of Manufacturing Engineering (Course Core Subjects) Student has to choose three core course modules only MANUFACTURING SYSTEM ENGINEERING INDUSTRIAL ENGINEERING Subjects Credit Hours Subjects Credit Hours Intelligent Manufacturing Design of Manufacturing Lean Manufacturing Robotics & Automation Engineering Economy and Decision Analysis Production Planning and Control System Supply Chain Management Manufacturing Cost and Economy Industrial and Work System Design Facilities Planning QUALITY SYSTEM ENGINEERING PRECISION ENGINEERING Subjects Credit Hours Subjects Credit Hours Design for Quality Total Quality Management Reliability Engineering Statistical Quality Control and Six Sigma Engineering Economy and Cost Analysis Advanced Metrology Micromachining Technology Computer Aided Engineering Precision Engineering Quality and Reliability

33 Faculty of Information and Communication Technology 4(i) Master of Computer Science (Programme Core Subjects) Postgraduate Prospectus 2015/ Subjects Theory of Computation Advanced Human-Computer Interaction Advanced Data communication & Networks Computer Architecture & Compiler Algorithm Analysis and Design Project 1 Project 2 Credit Hours 6 4(ii) Master of Computer Science (Course Core) Student has to choose 4 core course modules in each specialization INTERNETWORKING TECHNOLOGY SECURITY SCIENCE Subjects Credit Hours Subjects Credit Hours Parallel Processing Advanced Scalable Internetworking Advanced Network Design and Diagnostics Distributed Computing Systems Advanced High Performance Network Advanced Mobile Computing Public Key Infrastructure Computer Forensics Systems and Networking Hacking Cryptography and Data Security Intrusion Detection and Prevention Security Management Practices Watermarking SOFTWARE ENGINEERING & INTELLIGENCE MULTIMEDIA COMPUTING Subjects Credit Hours Subjects Credit Hours Advanced Software Engineering Artificial Intelligence Requirement Elicitation Knowledge Representation & Reasoning Advanced Topics in Software Intelligent DATABASE TECHNOLOGY D Modeling Advanced D Animation Computer Graphics & Visualisation Advanced Audio and Video Technology Mobile Application Development Advanced Web Programming Multimedia Professional Ethics Multimedia Based Instructional Design Subjects Credit Hours Database Programming Database Administration Security Mobile Database Advanced and Deductive Database Systems Data Warehousing and Data Mining Distributed Database Current Trend of Database Technology

34 2 Faculty of Technology Management and Technopreneurship 5(i) Master of Business Administration (Programme Core) Subjects Global Management & Organizational Behaviour Technopreneurship & Industrial Leadership Economics for Managers Accounting & Finance for Managers Marketing Management and Technology Technology and Operation Management Managing Human Side of Technology Strategic Technology Management Information Technology and E-Commerce Research Methodology Project Paper Programme Core Credit Hours Credit Hours 6 6 5(ii) Master of Business Administration (Course Core) ADVANCED OPERATIONS MANAGEMENT TECHNOLOGY AND INNOVATION MANAGEMENT Subjects Credit Hours Subjects Credit Hours Advanced Manufacturing and Service Management Supply Chain Management Quality Management Course Core Credit Hours Total Credit Hours 9 45 Technology Forecast Managing Innovation and Technological Change Technology Transfer Course Core Credit Hours Total Credit Hours 9 45

35 Postgraduate Prospectus 2015/2016 ENTRY REQUIREMENTS

36 4 ENTRY REQUIREMENTS Candidates must have the following academic qualification(s): Doctoral Programme a) A Master degree from UTeM or any other accredited institutions of higher learning; OR b) Any other qualifications that are recognised as equivalent to a Master degree or other relevant qualifications and experience that are recognised by the Senate. c) For Industrial PhD programme, candidate must be currently an employee as professionals, executives, engineers, researchers or equivalent, in the industry or Malaysian company operating overseas. d) Application for Doctoral degree must be accompanied by an initial research proposal. Master Degree Programmes a) A relevant Bachelor s Degree (honours) with good grades (minimum CGPA of 2.75 or equivalent) from UTeM or any other institutions of higher learning recognised by the Senate; OR b) Any other qualification that is recognised as equivalent to a Bachelor s degree (honours) or other relevant qualifications and experience that are recognised by the Senate; OR c) For candidate with Bachelor s degree whose CGPA is between 2.74 and 2.5, relevant work experience in the related fields will be considered. One (1) year relevant experience will be considered as equivalent to 0.1 CGPA; OR d) For candidate with Bachelor s degree whose CGPA is between 2.49 and 2.00, minimum of 5 years relevant work experience in the related fields will be considered. e) Candidates with diploma qualification and minimum work experience of TEN (10) years in the relevant field of interest will be considered together with UTeM s Accredited Prior Experiential Learning (APEL) except for Masters of Business Administration and Master of Computer Science where MQA APEL application should be made directly to the MQA and approval must first be obtained before applying to UTeM programme. f) Applicants for the MBA programme must have at least one (1) year relevant working experience. g) Application for Master (by Research) programme must be accompanied by an initial research proposal.

37 Postgraduate Prospectus 2015/ Language Requirements a) International applicants are required to present the Test of English as a Foreign Language (TOEFL) or the test administered by the International English Language Testing System (IELTS) with the minimum required score listed intable below Types of Programmes Master Doctoral Minimum TOEFL Score Minimum IELTS Score b) Applicants without TOEFL/IELTS or for those who obtained a score below the requirement above are required to undergo and pass the English language programme conducted by UTeM prior to commencement of the postgraduate programme. c) Exemption may be given to those who have undertaken regular programmes of studies and graduated from universities that use English as the medium of instruction or who has graduated from UTeM in a programme with English as the medium of instruction. Additional Requirements for International Students a) All international students are required to register as full time student and should have the financial capability to meet the course fees and living expenses. b) Applicants need to submit a letter of certification from their Ministry of Education verifying nationality and academic qualifications of candidate. c) Academic transcripts and supporting documents must be certified true copies by a senior public official from the applicant s country or from Malaysia. d) Proof of financial ability to pursue their studies and live in Malaysia for the duration of study. A letter of financial guarantee/sponsorship or the most recent financial statement from applicant s bank is sufficient. e) Have international passport with at least TWO (2) years validity and meet all immigration procedures. f) Medical check-up by the health authorities.

38

39 Postgraduate Prospectus 2015/ FEES

40 8 Fees for Doctor of Philosophy (PhD) Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for 6 semesters , , C Tuition Fee i) Compulsory subjects (6 credits) Subtotal ii) Research (84 credits) Subtotal per credit 1, per credit 12, per credit 2, per credit 24, Total (C) 1, , D Thesis examination i) Examination fee ii) Re-examination fee 1, , , , Total (D) 1, , Total (A+B+C+D) 16, ,728.00

41 Postgraduate Prospectus 2015/ Fees for Doctor of Engineering (DEng) Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for 6 semesters , C Tuition Fee i) Compulsory subjects (18 credits) Subtotal ii) Research (84 credits) Subtotal per credit 4, per credit 1, Total (C) 6,00.00 D Thesis examination i) Examination fee ii) Re-examination fee 1, , Total (D) 1, Total (A+B+C+D) 8,

42 40 Fees for Doctor of Information Technology (DIT) Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for 7 semesters , , C Tuition Fee i) Compulsory subjects (21 credits) Subtotal ii) Research (every semester) 5 Semester Subtotal per credit 8, , , per credit 14, , , Total (C) 2, , D Thesis examination i) Examination fee ii) Re-examination fee 1, , , , Total (D) 1, , Total (A+B+C+D) 26, , **If the program conducted off campus, the tuition fees will be adjusted accordingly.

43 Postgraduate Prospectus 2015/ Fees for Master Programme by Research Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for semesters C Tuition Fee i) Compulsory subjects (6 credits) Subtotal ii) Research (0 credits) Subtotal per credit per credit, per credit 1, per credit 7, Total (C) 4, , D Thesis examination i) Examination fee ii) Re-examination fee Total (D) Total (A+B+C+D) 5, ,42.00

44 42 Fees for Master Programme by Mixed Mode Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for 4 semesters C Tuition Fee i) Credit Hours ii) RM/credit hour 42 hours hours Total (C) 6, , Total (A+B+C) 7, , Fees for Master Programme by Taught Course Master of Electronic Engineering and Master of Mechanical Engineering Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for semesters C Tuition Fee i) Credit Hours ii) RM/credit hour 40 hours hours Total (C) 6, , Total (A+B+C) 6, ,290.00

45 Master of Manufacturing Engineering and Master of Computer Science Postgraduate Prospectus 2015/ Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for semesters C Tuition Fee i) Credit Hours ii) RM/credit hour 42 hours hours Total (C) 6, , Total (A+B+C) 7, , Master of Business Administration Details Local (RM) International (RM) A Registration Fee Orientation Registration Alumni Student smart card Total (A) B Service Fee Student activities Administration Total Total (B) for 4 semesters C Tuition Fee i) Credit Hours ii) RM/credit hour 45 hours hours Total (C) 1, , Total (A+B+C) 14, ,210.00

46 44

47 Postgraduate Prospectus 2015/ FINANCIAL ASSISTANCE

48 46 1. Postgraduate Fellowship Scheme (ZAMALAH) This scheme is designed to enhance the number and quality of postgraduate students as well as UTeM research activities. Students pursuing Master of Science and Doctor of Philosophy are invited to apply: Eligibility: a) Having an excellent academic qualification with the CGPA of not less than.50 or equivalent at the undergraduate level. b) For applicants who have a Master degree, they must also have outstanding academic achievement at undergraduate level. c) Registered as a full time student for Master of Science or Doctor of Philosophy at UTeM. d) Applicants do not receive scholarships or financial assistance from any other bodies or organization. e) Students in the final stages of Bachelor/MSc with excellent academic performance and intends to pursue Master / PhD by research can also apply by submitting an application through their respective faculties and obtain the recommendation from the Dean of the faculty. f) The application is open to local and international candidates. Duration: The maximum funding period is TWO (2) years for Master of Science and THREE () years for Doctor of Philosophy. Stipend: Monthly Allowance: Degree PhD MSc Amount (RM) 2, , Recipients of this scheme will be exempted from paying Tuition and Examination Fees. As for other fees, it is the responsibility of the candidate to settle. Closing Date: Application is open throughout the year. However, the selection process will be held in March, July, October and December. Application: Application must be made using the official application form that can be downloaded from PPS website and must be accompanied by a copy of identity card/passport, degree, transcripts, and detailed research proposal. Application must be submitted to: Dean, Centre for Graduate Studies, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100, Durian Tunggal, Melaka.

49 2. UTeM MyBrain Fellowship Scheme Postgraduate Prospectus 2015/ The objective of this scheme is to get qualified and competent UTeM Bachelor degree graduates to pursue Master and Doctoral (PhD) programme in research mode. UTeM MyBrain scheme is a form of financial aid that was established by the University. It is a privilege granted to Bachelor degree graduates who has achieved overall good examination result. This scheme is also designed to enhance the number and quality of postgraduate students as well as university research activities. Eligibility: a) Students who have recently graduated from UTeM b) Obtained a good track record of study c) Obtained at least CGPA of.50 d) Acquired A- grade in Final Project e) Acquired MUET band 4 f) Have a strong interest in research and innovation Implementation: a) Faculty will offer and select the appropriate students after the results confirmed by the Senate. b) Each faculty will be allowed to choose 5 students for each year. c) Recipients will be given a monthly allowance of RM1, per month and the tuition fees will be waived for a maximum of 4 semesters (24 months of study). d) Students who are required to sign a Letter of Agreement that they will be subjected to a refund of the scheme if they do not complete their studies without a valid reason. e) Recipients must comply with all regulations issued by PPS. f) There is no contract of employment between UTeM with the recipients.. MyBrain15 Scholarship MyBrain15 programme is a scholarship for Malaysian full-time postgraduate students, offered by the Ministry of Education. It was created under the 10th Malaysia Plan. The objective of MyBrain15 program is to reach 60,000 PhD holders among Malaysian citizens by year 202. The schemes implemented through MyBrain15 programme are MyPhD, MyMaster and MyPhD Industry as given:

50 48 MyMaster Motivate and encourage graduates to pursue their studies at a higher level, and to be a feeder to the MyPhD programme. MyPhD Objective Increase the number of highly skilled and knowledgeable professionals, and promote innovation and creativity in order to generate local economic and industry growth. Eligibility criteria Industrial PhD Promote knowledge sharing between industry and academia to produce highly knowledgeable and competent professionals. Malaysian citizen No age limit Unemployed graduate with no fixed income; OR employee in the private sector; OR lecturer in a private institution of higher education (IPTS) Not a recipient of any scholarship or financial aid (other than allowance as a raduate Researcher Assistant) for studies of the same level Not bonded by any parties during sponsorship period (eg from previous scholarships) Is currently pursuing or has obtained admission to full-time postgraduate studies at an institution of higher education. Bachelor s degree or government-recognised equivalent with a minimum CGPA of 2.75< Tuition fees of up to RM10,000 for 24 months paid directly to the institution Malaysian citizen No age limit Obtained admission or is already pursuing studies at an institution of higher education Not a recipient of any scholarship or financial aid (other than allowance as a graduate Researcher Assistant) Is currently pursuing or intends to pursue full-time postgraduate studies. Academic requirements Master s degree with a minimum CGPA of.00 OR Master s student who has been approved by Senate to proceed to a PhD programme Value of scholarship Tuition fees up to RM24,000 maximum for a period of not more than 48 months Malaysian citizens who are executives currently working in industry or private companies (inclusive of employees of GLC status companies) who are directly involved in research and development, innovation and in increasing the competitiveness of the industry. Obtained admission into or is already pursuing studies at an institution of higher education Not a recipient of any scholarship or financial aid (other than allowance as a graduate Researcher Assistant) Is currently pursuing or intends to pursue full-time postgraduate studies. Master s degree or equivalent with minimum CGPA of.0 with at least years of working experience OR Master s student who has been approved by Senate to proceed to a DEng programme Tuition fees up to a maximum of RM50,000 for a study period of not more than 48 months

51 Postgraduate Prospectus 2015/ Institutions Public and selected private institutions of higher education Areas of study Science and Technology Social sciences and Liberal arts Engineering, Science and Technology Sponsorship recipients and a guarantor must enter into a contract with the government in agreement to complete their studies during the sponsorship period. Students will be required to reimburse the sponsorship if they a) drop out or postpone their studies without permission b) are expelled by the institution of higher education due to disciplinary problems / academic weakness or inability to keep to the rules of the institution c) failed in their studies Recipients will be bonded under a contract and required to work in Malaysia or any organisation that has beneficial links to Malaysia for five (5) years. Application - Application is open year-round until Sponsorships will be offered in four (4) phases in January, April, July and October every year. Applicants are required to apply online via the MyBrain15 website. Prior to applying, applicants must obtain an offer letter from a recognised institution of education and prepare a research proposal. Selection for recipients will be made by the selection committee chosen by the Ministry of Higher Education. F For application details, visit

52 50

53 Postgraduate Prospectus 2015/ FACULTIES

54 52 FACULTY OF ELECTRICAL ENGINEERING Electrical engineering forms the fundamental study to the generation, distribution and utilisation of energy efficiently. There will be significant growth in research, development and manufacturing activities in the field of electrical engineering and it constitutes the basis for valuable and worthwhile careers for well-qualified graduates. The Faculty offers a wide range of laboratories, fully equipped with the latest teaching and learning equipment with the ratio of TWO (2) to THREE () students per station. This arrangement will suit the teaching and learning concepts based on problem cantered, action learning and practical application as stipulated in the Practice and Application Oriented approach. The Faculty promotes excellence in education and research in the areas of electrical engineering. There are boundless opportunities for new ideas, discovery and the meeting of minds. The valuable experience will enable the students to discover their full potential while at the same time to prepare themselves for the future. List of Postgraduate Programmes By Research: Doctor of Engineering Doctor of Philosophy Master of Science in Electrical Engineering Master of Science in Mechatronic Research Focus By Mixed Mode: Master of Electrical Engineering Industrial Power Power Electronics and Drives Robotics and Control Doctor of Philosophy and Master of Science (Research Mode) High Voltage Technology Power Electronics and Drives Mechatronic System Robotic and Industrial Automation Sustainable Energy & Power System FACULTY OF ELECTRICAL ENGINEERING FKE Contact Us Faculty of Electrical Engineering Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia Tel: Website:

55 List of Academic Staff Postgraduate Prospectus 2015/ No. Name Highest Academic Qualification Department Prof. Datuk Dr. Mohd Ruddin bin Abd Ghani Assoc. Prof. Dr. Tay Choo Chuan Assoc. Prof. Mohd Ariff bin Mat Hanafiah Dr. Mohd Saifulza bin Suhaimi Dr. Chong Shin Horng Dr. Aliza binti Che Imran Dr. Sahazati binti Md. Rozali Dr. Rozaimi bin Ghazali Assoc. Prof Ir. Dr. Rosli bin Omar Dr. Mariam binti Md Ghazaly Dr. Fariz bin Ibrahim Dr. Ahmad Zaki bin Shukor Dr. Muhammad Fahmi bin Miskon Dr. Rahifa binti Ranom Dr. Muhammad Herman bin Jamaluddin Prof. Dr. Marizan bin Sulaiman Dr. Aminudin bin Aman Dr. Aida Fazliana binti Abdul Kadir Dr. Gan Chin Kim Dr. Loh Ser Lee Dr. Aziah binti Khamis Dr. Hidayat bin Zainuddin Dr. Abdul Rahim bin Abdullah Prof. Dr. Mohamad Rom bin Tamjis Assoc. Prof. Dr. Zulkifilie bin Ibrahim Dr. Auzani bin Jidin Dr. Kasrul bin Abdul Karim Ir. Dr. Md Nazri bin Othman Dr. Fazlli bin Patkar Dr. Mohd Luqman bin Mohd Jamil Dr. Raja Nur Firdaus Kashfi bin Raja Othman Dr. Maaspaliza binti Azri Dr. Azziddin bin Mohamad Razali Dr. Fairul Azhar bin Abdul Shukor MEdu. DEng. [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Control, Instrumentation and Automation Power Quality & Power Electronic Mechatronic Mechatronic Mechatronic Mechatronic Mechatronic Mechatronic Industrial Power Industrial Power Industrial Power Industrial Power Industrial Power Industrial Power Industrial Power Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives Power Electronics & Drives

56 54 FACULTY OF ELECTRONICS AND COMPUTER ENGINEERING The faculty plays a very important role in producing engineering graduates who have a strong knowledge in electronics and computer engineering as well as technical competency. Based on the outcome based education concept, through the application and practice oriented approach, graduates can now readily serve and contribute effectively towards the development of electronic engineering and its related industries globally. List of Postgraduate Programmes By Research: Doctor of Engineering Doctor of Philosophy Master of Science in Electronic Engineering By Taught Course: Master of Electronic Engineering Telecommunication System Computer Engineering Electronic System Research Focus Doctor of Philosophy and Master of Science (Research Mode) Antenna and Propagation Computer and Embedded System Consumer Electronic Electronics Instrumentation Optoelectronics RF and Microwave Engineering Satellite and Navigation System FACULTY OF ELECTRONICS & COMPUTER ENGINEERING FKEKK Contact Us Faculty of Electronics & Computer Engineering Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia Tel: Website:

57 List of Academic Staff Postgraduate Prospectus 2015/ No. Name Highest Academic Qualification Department Prof. Dato Dr. Mohamad Kadim bin Suaidi Prof. Dato Dr. Mohd Nor Bin Husain Assoc. Prof. Dr Abdul Rani Bin Othman Assoc. Prof. Dr. Badrul Hisham Bin Ahmad Assoc. Prof. Muhammad Syahrir Bin Johal Assoc. Prof. Dr. Zahriladha Bin Zakaria Assoc. Prof. Tan Kim See Dr. Azmi Bin Awang Md Isa Dr. Abdul Majid Bin Darsono Dr. Mohd Sa ari Bin Mohamad Isa Dr. Ho Yih Hwa Dr. Hazura bte Haroon Dr. Maisarah bte Abu Dr. Mohd Azlishah bin Othman Dr. David Yap Fook Weng Dr. Siti Khadijah binti Othman Dr. Hanim binti Abdul Razak Prof. Abdul Hamid Bin Hamidon Dr. Mohd Shakir bin Md Saat Dr. Mai Mariam bte Mohamed Aminuddin Dr. Kok Swee Leong Dr. Yosza bin Dasril Dr. Zamre Bin Abd Ghani Dr. Fauziyah bte Salehuddin Dr. Nurulfajar bin Abd. Manap Dr. Soo Yew Guan Dr. Anis Suhaila bte Mohd Zain Dr. Khoo Chin Foon Dr. Low Yin Yvonne Dr. Lim Kim Chuan Dr. Rhonira Binti Latif Dr. Wira Hidayat Bin Mohd Saat Dr. Masrullizam bin Mat Ibrahim Dr. Wong Yan Chiew Dr. Syafeeza bte Ahmad Radzi Dr. Norihan binti Abdul Hamid Dr. Mohd Riduan bin Ahmad [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Telecommunication Engineering Industrial Electronics Industrial Electronics Industrial Electronics Industrial Electronics Industrial Electronics Industrial Electronics Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering Computer Engineering

58 56 FACULTY OF MANUFACTURING ENGINEERING Manufacturing Engineering is a branch of engineering that requires knowledge and experience in order to fully grasp, exploit and control all the engineering techniques in manufacturing process and methods of producing products. It also requires aptitude to plan for manufacturing methods, research and develop tools, process and machines as well as the ability to combine facilities and systems in the intention of producing cost-effective products in a more feasible way. The Manufacturing Engineering Program in UTeM is developed to instill a strong engineering basics and core, so that graduates of this program are proficient in solving manufacturing engineering problems. Theoretical aspects learnt are equipped with practical sessions, analogous with the engineering education approach of application oriented. This will ensure graduates of manufacturing engineering are able to function effectively in their career. List of Postgraduate Programmes By Research: Doctor of Engineering Doctor of Philosophy Master of Science in Manufacturing Engineering By Taught Course: Master of Manufacturing Engineering Manufacturing System Engineering Industrial Engineering Quality System Engineering Precision Engineering Research Focus Doctor of Philosophy and Master of Science (Research Mode) Design and Concurrent Engineering Advanced Manufacturing Processes Autonomous & Intelligent Manufacturing Competitive Manufacturing Engineering Materials FACULTY OF MANUFACTURING ENGINEERING FKP Contact Us Faculty of Manufacturing Engineering Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia Tel: Website:

59 Postgraduate Prospectus 2015/ List of Academic Staff No. Name Highest Academic Qualification Department Prof. Dr. Mohd Razali bin Muhamad Prof. Datuk Dr. Zolkepli bin Buang Prof. Dr. Qumrul Ahsan Prof. Dr. Radzali bin Othman Assoc. Prof. Dr. T. Joseph Sahaya Anand Assoc. Prof. Dr. Azizah binti Shaaban Assoc. Prof. Dr. Jariah binti Mohamad Juoi Assoc. Prof. Dr. Mohd Warikh bin Abd Rashid Assoc. Prof. Dr. Zulkifli bin Mohd Rosli Dr. Mohd Asyadi Azam bin Mohd Abid Dr. Noraiham binti Mohamad Dr. Rose Farahiyan binti Munawar Dr. Lau Kok Tee Dr. Mohd Edeerozey bin Abd Manaf Dr. Mohd Yuhazri bin Yaakob Dr. Muhammad Zaimi bin Zainal Abidin Dr. Syahriza binti Ismail Dr Zurina binti Shamsudin Dr. Zaleha binti Mustafa Prof. Dato Dr. Abu bin Abdullah Assoc. Prof. Dr. Mohd Rizal bin Salleh Assoc. Prof. Ir. Dr. Sivarao A/L Subramonian Assoc. Prof. Dr. Md Nizam bin Abd Rahman Dr. Nur Izan Syahriah bin Hussein Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Engineering Materials Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process

60 58 No. Name Highest Academic Qualification Department Dr. Ahmad Kamely bin Mohamad Dr. Raja Izamshah bin Raja Abdullah Engr. Dr. Mohd Hadzley bin Abu Bakar Dr. Liew Pay Jun Dr. Mohamad bin Minhat Dr. Mohd Amran bin Ali Dr.Mohd Sanusi bin Abdul Aziz Dr.Mohd Shahir bin Kasim Dr. Mohd Amri bin Sulaiman Dr. Shajahan bin Maidin Prof. Dr. Md Dan bin Md Palil Assoc. Prof. Dr. Hambali bin Ariff Dr. Rosidah binti Jaafar Dr. Suriati binti Akmal Dr. Sugumar A/L Dharmalingam Prof. Dr. Bashir Mohamad bin Bali Mohamad Assoc. Prof Dr. Zamberi bin Jamaluddin Ir. Dr. Lokman bin Abdullah Dr. Fairul Azni bin Jafar Dr.-Ing. Azrul Azwan bin Abdul Rahman Dr. Ahmad Yusairi bin Bani Hashim Dr. Muhammad Hafidz Fazli bin Md. Fauadi Prof. Dr. Adi Saptari Assoc. Prof. Dr. Lukman Sukarma Assoc. Prof. Dr. Chong Kuang Eng Assoc. Prof. Dr. Puvanasvaran A/L A. Perumal Dr. Seri Rahayu binti Kamat Dr. Zuhriah binti Ebrahim Dr. Isa bin Halim Dr. Effendi bin Mohamad Dr. Wan Hasrulnizzam bin Wan Mahmood [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Process Manufacturing Design Manufacturing Design Manufacturing Design Manufacturing Design Manufacturing Design Manufacturing Design Robotic and Automation Robotic and Automation Robotic and Automation Robotic and Automation Robotic and Automation Robotic and Automation Robotic and Automation Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management Manufacturing Management

61 FACULTY OF MECHANICAL ENGINEERING Postgraduate Prospectus 2015/ The Faculty of Mechanical Engineering (FKM) is one of the seven faculties that being established in UTeM. The main focus of FKM is to train students to become competent engineers who will fulfill the much-needed engineering professionals especially for the industrial sector in Malaysia. In line with the university plan, establishment of postgraduate programmes is one of strategic planning in order to strengthen academic and research capability. Taking into account the national agenda, pertinent industrial needs and state of the art of knowledge development, the faculty developed their postgraduate programs on some focused area. The faculty is fast growing in the aspects of academic programmes, infrastructure, facilities, and teaching staff to meet the objectives of its existence. The balance between academic and technical - based training is emphasized so that postgraduates will be more competent and confident to face the challenge in their future career. List of Programmes By Research: Doctor of Engineering Doctor of Philosophy Master of Science in Mechanical Engineering By Mixed Mode: Master of Mechanical Engineering Applied Mechanics Energy Automotive Research Focus Doctor of Philosophy and Master of Science (Research Mode) Thermal Fluids Structural Mechanics & Advanced Materials Design & Innovation Automotive Engineering Energy Engineering By Taught Course: Master of Mechanical Engineering Structure Mechanics Energy Engineering Automotive Product Design FACULTY OF MANUFACTURING ENGINEERING FKM

62 60 List of Academic Staff No. Name Highest Academic Qualification Department Prof. Dr. Md. Razali bin Ayob Dr. Mohd Zaid Bin Akop Assoc. Prof. Juhari bin Ab. Razak Dr. Tee Boon Tuan Dr. Nona Merry Merpati Mitan Dr. Ahmad Anas Bin Yusof Dr. Cheng See Yuan Dr. Fatimah Al-Zahrah binti Mohd Sa at Dr. Mohd Yusoff bin Hj. Sulaiman Dr. Yusmady bin Mohamed Arifin Dr. Suhaila binti Salleh Profesor Dr. Md. Radzai bin Said Dr. Sivakumar A/L Dhar Malingam Dr. Md. Fahmi bin Abd. Mahmood Dr. Mohd Ahadlin bin Mohd Daud Dr. Mohd Zulkefli bin Selamat Assoc. Prof. Abd Salam Bin Md Tahir Assoc. Prof. Ahmad Rivai Dr. Mohd Juzaila bin Abd. Latif Dr. Azma Putra Dr. Mohd Khairi bin Mohamed Nor Dr. Haryanti Samekto Dr. Kamarul Arifin bin Zakaria Dr. Rafidah binti Hasan Dr. Rainah binti Ismail Dr. Nor Azmmi bin Masripan Dr. Nurfaizey bin Abdul Hamid Dr. Mohd Basri bin Ali Dr. Siti Hajar binti Sheikh Md Fadzullah Dr. Mohd Asri bin Yusuff Dr. Siti Nurhaida binti Khalil Dr. Abd Rahman bin Dullah Assoc. Prof. Ir. Dr. Abdul Talib bin Din Dr. Mohd Nizam Bin Sudin Dr. Shamsul Anuar Bin Shamsudin MSc. MSc. MSc. DEng. [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Thermal-Fluids Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Structure & Materials Design & Innovation Design & Innovation Design & Innovation Design & Innovation Design & Innovation Design & Innovation

63 Postgraduate Prospectus 2015/ No. Name Highest Academic Qualification Department Ir. Dr. Tan Chee Fai Dr. Faiz Redza Bin Ramli Ir. Dr. Mohd Rizal bin Alkahari Dr. Nor Salim bin Muhammad Dr. Ruztamreen bin Jenal Dr. Roszaidi bin Ramlan Dr. Reduan bin Mat Dan Dr. Abdul Munir Hidayat Syah Lubis Assoc. Prof. Dr. Noreffendy bin Tamaldin Dr. Ahmad Kamal Bin Mat Yamin Dr. Mohd. Fadzli bin Abdollah Dr. Musthafah bin Mohd Tahir Dr. Mohd Azman bin Abdullah DEng Design & Innovation Design & Innovation Design & Innovation Plant & Maintenance Plant & Maintenance Plant & Maintenance Plant & Maintenance Plant & Maintenance Automotive Automotive Automotive Automotive Automotive Contact Us Faculty of Mechanical Engineering Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia Tel: Website:

64 62 FACULTY OF INFORMATION & COMMUNICATION TECHNOLOGY Information and Communications Technology (ICT) is an integration of four major domains namely, software development, computer system and internetworking, database and rich media content development. Today, ICT is one of the fastest deployed technologies in the world. The use of ICT encompasses almost all the industries and certainly, the demand for ICT manpower and professionals is expected to increase tremendously. The Faculty of Information and Communication Technology (FTMK) at UTeM offers excellent practice and application orientated education programmes in ICT. The main goal is to produce competent and industrially relevant ICT professionals with not only adequate theoretical knowledge and foundation but also more importantly the skills and ability to practice. The faculty is also, in line with its vision to be one of the world s leading centers of excellence in ICT, offering opportunities for application-oriented and industrially relevant research and development. List of Programmes By Research: Doctor of Philosophy Doctor of Information Technology Master of Science in Information and Communication Technology By Taught Course: Master of Computer Science Internetworking Technology Database Technology Software Engineering and Intelligence Security Science Multimedia Computing Research Focus FACULTY OF INFORMATION & COMMUNICATION TECHNOLOGY FTMK Doctor of Philosophy and Master of Science (Research Mode) Software and Information Systems Engineering Data and Knowledge Engineering Artificial Intelligence, Modeling and Decision Technology Networking and Internet Computing Computer Systems and Security Contact Us Faculty of Information and Communication Technology Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia Tel:

65 Postgraduate Prospectus 2015/ List of Academic Staff No. Name Highest Academic Qualification Department Prof. Ahmad Zaki Bin A Bakar Assoc. Prof. Dr. Faaizah bt. Shahbodin Assoc. Prof. Dr. Sazilah bt. Salam Dr. Ahmad Naim bin Che Che Hanapi Dr. Norasiken bt. Bakar Dr. Zulisman bin Maksom Dr. Mohd Hafiz bin Zakaria Assoc. Prof. Norhaziah bt. Md. Salleh Assoc. Prof. Shahdan bin Md. Lani Assoc. Prof. Dr. Mohd Khanapi bin Abd. Ghani Prof. Dr. Nanna Suryana Herman Assoc. Prof. Mokhtar bin Mohd Yusof Assoc. Prof. Dr. Azah Kamilah bt Muda Dr. Nurul Akmar bt. Emran Dr. Sabrina bt. Ahmad Dr. Mohd Sanusi bin Azmi Dr. Massila bt. Kamalrudin Dr. Norashikin bt. Ahmad Dr. Noraswaliza bt. Abdullah Assoc. Prof. Dr. Rabiah binti Ahmad Prof. Datuk Dr. Shahrin bin Sahib Assoc. Prof. Dr. Mohd Faizal bin Abdollah Dr. Robiah bt.yusof Dr. Zul Azri bin Muhamad Noh Dr. Nor Azman bin Abu Dr. Nurul Azma bt. Zakaria Dr. Shekh Faisal bin Abdul Latip Dr. Norharyati bt.harum Dr. Siti Rahayu bt. Selamat Dr. Fahmi Arif MSc MSc [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Interactive Media Interactive Media Interactive Media Interactive Media Interactive Media Interactive Media Interactive Media Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering Software Engineering System& Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication

66 64 List of Academic Staff No. Name Highest Academic Qualification Department Dr. Wahidah bt. Md. Shah Dr. Aslinda bt. Hassan Dr. Nazrulazhar bin Bahaman Dr. Zurina binti Sa aya Assoc. Prof. Dr. Burhanuddin Mohd Aboobaider Assoc. Prof. Dr. Goh Ong Sing Assoc. Prof. Dr. Burairah bin Hussin Assoc. Prof. Dr. Abd. Samad bin Hasan Basari Dr. Asmala bin Ahmad Dr. Gede Pramudya Ananta Dr. Choo Yun Huoy Dr. Norzihani bt. Yusof Dr. Zuraida bt. Abal Abas Dr. Halizah bt. Basiron Dr. Zeratul Izzah binti Mohd Yusoh Dr. Sharifah Sakinah bt. Syed Ahmad Dr. Abdul Samad bin Shibghatullah Dr. Abdul Syukor bin Mohamad Jaya Dr. Yogan A/L Jaya Kumar Dr. Sazalinsyah bin Razali System & Computer Communication System & Computer Communication System & Computer Communication System & Computer Communication Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing Industrial Computing

67 Postgraduate Prospectus 2015/ FACULTY OF TECHNOLOGY MANAGEMENT & TECHNOPRENEURSHIP Faculty of Technology Management and Technopreneurship was established to provide postgraduate educations and training in the field of Technology Management and Entrepreneurship. The Master of Science is designed for those who are involved in the technological based industry and want to further their career in the areas of Technical and Business Management. The programme is also for those who are aspired to be a successful manager in the area of Entrepreneurship. List of Programmes By Research: Doctor of Philosophy Master of Science in Technology Management Master of Science in Entrepreneurship By Taught Course: Master of Business Administration Advanced Operations Management Technology and Innovation Management Research Focus Doctor of Philosophy and Master of Science (Research Mode) Entrepreneurship Technology Management FACULTY OF TECHNOLOGY MANAGEMENT & TECHNOPRENEURSHIP FPTT

68 66 List of Academic Staff No. Name Highest Academic Qualification Department Prof. Dr. Salleh bin Yahya Assoc. Prof. Dr. Izaidin bin Abdul Majid Dr. Haslinda binti Musa Dr. Norhidayah Mohamad Dr. Sentot Imam Wahjono Dr. Othman Aman Dr. Norain binti Ismail Dr. Amiruddin bin Ahamat Assoc. Prof. Dr. Md Nor Hayati bin Tahir Dr. Juhaini binti Jabar Dr. Norfaridatul Akmaliah binti Othman Dr. Ismi Rajiani Dr. Mohd. Syaiful Rizal b. Abdul Hamid Dr. Chew Boon Cheong Dr. Fararishah binti Abdul Khalid Dr. Mohd Fazli bin Mohd Sam Dr. Yusri bin Arshad Dr. Mohammed Hariri bin Bakri [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Technopreneurship Technopreneurship Technopreneurship Technopreneurship Technopreneurship Technopreneurship Technopreneurship Technopreneurship Technology Management Technology Management Technology Management Technology Management Technology Management Technology Management Technology Management Technology Management Technology Management Technology Management Contact Us Faculty of Technology Management & Technopreneurship Universiti Teknikal Malaysia Melaka, City Campus, Jalan Hang Tuah 7500 Melaka Tel: Website:

69 INSTITUTE OF TECHNOLOGY MANAGEMENT & ENTREPRENEURSHIP Postgraduate Prospectus 2015/ Institute of Technology Management and Entrepreneurship (IPTK) is an Institute established to provide postgraduate educations and training in the field of Human Resource Development (HRD), Technical Communication and Industrial Counseling. The Doctor of Philosophy and Master of Science offered by IPTK explore and examine contemporary issues and challenges with the aims of providing the latest knowledge and solutions these areas. To achieve these aims, the diversity of expertise under IPTK provides the students with an avenue of undertaking multidisciplinary research approach, thus enriching them with exciting new exposure which could be translated into pragmatic strategies and practices in the areas of Human Resource Development, Technical Communication and Industrial Counseling. List of Programmes By Research: Doctor of Philosophy Master of Science in Human Resource Development Master of Science in Technical Communication Master of Science in Industrial Counseling Research Focus Doctor of Philosophy and Master of Science (Research Mode) Human Resource Development Technical Communication Industrial Counseling List of Academic Staff No. Name Highest Academic Qualification Department Prof. Dr. Mohd Taib b. Hj. Dora Assoc. Prof. Datuk Dr. Su aidi bin Dato Safei Assoc. Prof. Madya Dr. Hjh. Hanipah bt Husin Dr. Rahman bin Hashim Assoc. Prof. Dr. Raja Roslan bin Raja Abd. Rahman Assoc. Prof. Rosli bin Saadan Dr. Anidah bt. Robani Dr. Asiah bt. Hj. Mohd Pilus Dr. Sazelin bt. Arif Dr. Radzuan b. Nordin Dr. Shahrulanuar b. Mohamed MSc. [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development

70 68 No. Name Highest Academic Qualification Department Dr. Norliah bt Kudus Dr. Zawiah binti Mat Dr. Mahadi b. Abu Hasan Dr. Ab Rahim bin Ibrahim Dr. Safiah bt Sidek Assoc. Prof. Dr. Ahmad Rozelan bin Yunus Dr. Mohamad b. Hj. Bokhari Assoc. Prof. Dr. Syed Najmuddin b. Syed Hassan Dr. Norida bt. Abdullah Dr. Noorli bt Khamis Dr. Linda Khoo Dr. Lee Mei Ph ng Dr. Kalthom bt Husin Dr. Hazmilah bt Hasan Dr. Aida Nasirah bt Abdullah Dr. Muliati bt. Sedek Human Resource Development Human Resource Development Human Resource Development Human Resource Development Human Resource Development Industrial Counseling Industrial Counseling Industrial Counseling Industrial Counseling Technical Communication Technical Communication Technical Communication Technical Communication Technical Communication Technical Communication Technical Communication Contact Us Institute of Technology Management and Entrepreneurship Universiti Teknikal Malaysia Melaka (UTeM) Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia

71 Postgraduate Prospectus 2015/ APPLICATION FOR ADMISSION Application can be made throughout the year. Prospective students are required to submit their application online via ismps/. All supporting documents together with the RM0.00 (for local) and RM (USD for international) (non-refundable) processing fee must be submitted by mailing it to: Dean Centre for Graduate Studies Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, Durian Tunggal, Melaka, Malaysia For further details, please contact: Tel: (606) /6772/6771/6781 Fax: (606) [email protected] Website:

72 70