CURRICULUM VITAE. Luis M. Camarinha-Matos

Transcription

1 CURRICULUM VITAE Luis M. Camarinha-Matos March 2010

2 L. M. Camarinha-Matos ii

3 TABLE OF CONTENTS 1. PERSONAL EDUCATION EMPLOYMENT AND TEACHING Teaching Other pedagogic-related activities Teaching abroad Projects in the educational area Training courses for professionals in industry and services Other activities SCIENTIFIC ACTIVITIES Main areas of interest Research activities before the PhD Research activities after PhD Supervision of post-graduation students Evaluation of projects and project proposals OTHER ACTIVITIES Academic and research management Participation in applications evaluation committees and thesis evaluation committees Organization of scientific events Evaluation of articles Participation in scientific events Membership to technical / scientific associations PUBLICATIONS Publications in journals Publications in conference proceedings Books and chapters Editorship Talks without written paper Editorial boards of journals L. M. Camarinha-Matos iii

4 L. M. Camarinha-Matos iv

5 1. PERSONAL Name: Luis Manuel Camarinha-Matos Business address: New University of Lisbon Quinta da Torre Monte Caparica - PORTUGAL Home address: Rua Beatriz Costa 28 - Botequim CHARNECA DA CAPARICA - PORTUGAL Tel.: e-amil: cam@uninova.pt Birthdate: 11 March 1955 Married, Portuguese citizen 2. EDUCATION Habilitation exam ( agregação ) in Robotics and Computer integrated manufacturing / virtual enterprises, New University of Lisbon, PhD in Computer Science (Thesis: Programming and control system for robotic systems A knowledge-based architecture), New University of Lisbon, 12 Jun M.Sc. degree in Computer Science Engineering (eq. Provas de Aptidão Pedagógica e Capacidade Científica ) (Concurrent Systems and Real Time Programming), New University of Lisbon, 12 Jun 1989, grade: Very Good. Engineering degree in Computer Engineering (Hardware), New University of Lisbon, 1979, grade: 16 (in 20). L. M. Camarinha-Matos 1

6 Bachelor degree in Electrical Engineering (Energy and Power Systems), Polytechnic Institute of Lisbon (ISEL), 1977, grade: 18 (in 20). Specialization course on Materials Science, New University of Lisbon, Short courses: Introduction to research Informática no Espaço UNL, Computer Science Department, New University of Lisbon, Operating Systems, New University of Lisbon,, 2 weeks, "Computer Aided Design" Technical University of Darmstadt, Germany, 2 weeks, Sept Advanced Programming Techniques, Portuguese Computer Society (API), 3 days, Oct "Software Engineering Economics and Software Development Project Management" - New University of Lisbon / Portuguese Computer Society (API), 20 Sept - 1 Oct "Knowledge Based Systems" - BECEEP - Berlin Continuing Engineering Education Program, AMK Berlin, Germany, Oct "NATO Advanced Study Institute on ROBOTICS and Artificial Intelligence", Castelvecchio Pascoli, Italy, 26 Jun - 8 Jul "NATO Advanced Study Institute on Industrial Robotic Vision", Catholic University of Leuven, Belgium, Aug 1984 (2 weeks). "Robot Manipulators, Computer Vision, and Automated Assembly", summer course, Massachusetts Institute of Technology, USA, 8-12 Jul 85. "NATO-AGARD Artificial Intelligence and Robotics", Lecture Series N. 142, LNETI, Lisbon, 3-4 Oct 85. Course on Knowledge Craft, Carnegie Group Inc., Pittsburgh, USA, May 87. "Summer course on Machine Learning", Urbino, Italy, 22 Jul-1 Aug 89. Course of English language, American Language Institute of Lisbon, "Teaching and training with print simulators in a multimedia environment", COMETT, Helsinki/Espoo, Finland, Mar 93. Scholarships and awards: Scholarship from Calouste Gulbenkian Foundation ( ). Scholarship from Portuguese Rotary Foundation ( ). Prize D. Dinis - Sociedade Central de Cervejas, 1973 (best student of each secondary school). Prize Santos Pardal Portuguese Rotary Foundation, Prémio Fernando Ferreira - Fundação Rotária Portuguesa, Silver Core Award (relevant services), International Federation for Information Processing (IFIP), Outstanding Service Award, International Federation for Information Processing (IFIP), Sep IFIP Technical Committee 5 Fellow, Best paper award, DEST 2009, Istanbul, Turkey. Doctor Honoris Causa, University Politehnica of Bucharest, Romania, 30 Oct L. M. Camarinha-Matos 2

7 3. EMPLOYMENT AND TEACHING 3.1 Teaching Positions Full Professor, Engineering Department of the New University of Lisbon, since 19 Mar Associate Professor with Habilitation ( Agregação ) in Robotics and Integrated Manufacturing, 13 Oct Mar Associate Professor, Electrical Engineering Department of the New University of Lisbon, 31 Jul Oct Auxiliary Professor, Electrical Engineering Department of the New University of Lisbon, 1 Mar Jul Auxiliary Professor, Computer Science Department of the New University of Lisbon, 12 Jun Feb 93. Teaching assistant, Computer Science Department of the New University of Lisbon, 18 Mar Jun Trainee assistant, Computer Science Department of the New University of Lisbon, 1 Dec Mar Lab assistant, Computer Center of Instituto Superior de Engenharia de Lisboa (CCISEL), 1 Apr Nov Teaching at ISEL As founding member of the Computer Center of ISEL, had an active participation in the introduction of computer science courses in the various engineering programmes of ISEL ( ). Lab assistant (Apr Nov 1979) for the following courses: -Introduction to Computers I -Introduction to Computers II (Microprocessorss) -Computational Methods. L. M. Camarinha-Matos 3

8 3.1.3 Teaching at Faculty of Sciences and Technology of the New University of Lisbon ( FCT / UNL) Engineering degree in Informatics: Teaching assistant (Computer Science Department): -Logic Systems I and II (1979/1980, 1981/1982) -Microprocessors I and II (1980/1981, 1982/1983). Teaching (theory and lab) of: -Data structures (1980/1981, 1982/1983, 1984/1985). -Microprocessors II (1983/1984). Teaching and coordination of: -Complements of Robotics (1987/ /1996). -Robotics (1989/ /1996). Teaching Project of Robotics (1988/ /1996). Teaching for other engineering programmes: Teaching Intrduction to Computers and Programming (1991/1992), for Applied Chemistry and Industrial Engineering students. MSc in Electrical and Computer Engineering: Founder and responsible for the courses of the Robotics and Inegrated Manufacturing group: Data Modeling in Engineering, Real Time Systems, Virtual Enterprises / Virtual Organizations, Systems Integration, Multimedia Information Systems, Robotics, Intelligent Supervision, Robotic Systems and CIM, Telerobotics and Autonomous Systems, Project of Robotics and CIM, Distributed Manufacturing Systems. Coordination and teaching of Information Organization and Computers (1993/1994, 1994/1995). Coordination and teaching of Data Modeling in Engineering (since 1993/1994). Coordination and teaching of Real Time Systems (since 1995/1996). Coordination of Multimedia Information Systems (since 1995/1996). Teaching: 1995/ /1997. Coordination of Robotics (since 1995/1996). Teaching: 1995/ /1998. Coordination of Telerobotics and Autonomous Systems (since 96/97). Teaching: 1996/ /1999. Coordination and teaching of Robotic Systems and CIM (1996/ /2000). Coordination of Intelligente Supervision (since 1996/1997). Teaching: 1996/ /98, and since 2000/2001. L. M. Camarinha-Matos 4

9 Coordination of Systems Integration (since 2000). Teaching: Coordination and teaching of Virtual Enterprises / Virtual Organizations (since 2001). Coordination and teaching of Distributed Manufacturing Systems, (since 2002/2003). Master of Science in Informatics: Coordination and teaching of CIM Information Systems (1991/1992, 1992/1993, 1993/1994). Coordination and teaching of Computer Integrated Manufacturing (1996/ /2000). PhD Program in Electrical and Computer Engineering: Coordination and teaching of Scientific Research Methodologies and Techniques (2008/2009). Coordination and teaching of Doctoral Conference (2008/2009). Co-coordination of Entrepreneurship Methods (2008/2009). Coordination and teaching of Collaborative Networks (2008/2009). Coordination and teaching of Robotics and Integrated Manufacturing (2008/2009). 3.2 Other pedagogic-related activities Member of the Scientific and Pedagogic Council (Electrical Engineering) of ISEL: 1974/1975 and 1975/1976. Member of Pedagogic Committee of Computer Engineering programme of FCT/UNL ( ). President of the Pedagogic Committee of the Computer and Electrical Engineering Programme of FCT/UNL ( , 1st mandate), ( , 2nd mandate). Member of the Pedagogic Council of FCT/UNL ( ). Representative of the Electrical Engineering Department in the Equivalences Granting Committee of FCT/UNL (since 1994). Coordination of the Program / President of the Scientific Committee of the PhD Program in Electrical and Computer Engineering (since 2008/2009). L. M. Camarinha-Matos 5

10 3.3 Teaching abroad Teached the following courses (by invitation): Mexico: "Systems Integration and Modelling in FMS/FAS", Jul 1994, for the academic staff of the CINVESTAV (Centro de Investigaciones del IPN) and other universities in Mexico. Bulgaria: "CIM Information Systems and FMS/FAS", Jun 93, for the academic staff of the Industrial Engineering department of the Technical University of Varna. Check republic: "CIM Information and Systems Integration", 2-10 May 1994, for the academic staff of the Mechanical Engineering Faculty of the Technical University of Brno. Check republic: Multi-agent systems and Virtual Enterprises, in the European Summer School on Artificial Intelligence, Jul 2001, Prague. Finland: Collaborative Networked Organizations Foundations, in the Summer School on Collaborative Networked Organizations, Sep 2006, Helsinki. Spain: Collaborative Networks, for the MSc programme on Ingeniería Avanzada de Producción, Logística y Cadena de Suministro, Polytechnic University of Valencia, Mar 2007, Apr Projects in the educational area Coordinator of the team of FCT/UNL involved in the following projects: TEMPUS JEP Promoting change in Manufacturing Engineering Departments at the University of Brno, Czechoslovakia and the University of Varna, Bulgaria ( ). COMETT 6647 PrintSIM- Training Environment for Printing Technology ( ). LEONARDO PostPressSim ( ): Computer aided training system for bookbinding, finishing and mailing areas. ALFA AIR ( ): Automatique Industrielle Robuste (involving European and Latin American institutions from France, Spain, Portugal, Germany, Finalnd, Colombia, Brazil, Argentina). Leonardo ACOMAS-TN ( ). E-LEARN Teachning via Internet (Sept 1999-Jul 2000). TSER IFC Further training funds as an impulse for new models of life long training - Integrated Funding Concept (Mar 99 Jun 2000). L. M. Camarinha-Matos 6

11 IST IP ECOLEAD: European Collaborative Networked Organizations Leadership Initiative, (Apr 2004 Mar 2008) (this project includes R&D see and teaching activities). Other grants: - TEMPUS Individual Mobility Grant IMG-P (1990/1991) Cooperation with Hunagry on education on Robotics and CIM. - TEMPUS Individual Mobility Grant (1992/1993) Cooperation with Hunagry on education on Robotics and CIM. 3.5 Training courses for professionals in industry and services Teaching Collaboration in the II Coourse of Microprocessors for Professionals, organized by the Informatics Department of UNL (1979/1980). Design, organization and teaching of the course Systems software for Microcomputers, for the engineering staff of the R&D department of the Centrel - AEP company, Dec Apr Collaboration in the PEDIP course on Intelligent Robotics for industry (Module: CIM Information Systems), Uninova, Monte Caparica, Nov - Dec Other short courses Teachning of the following modules: - Data Structures and Operating Systems, in the programme of Systems Analysis of INA (National Institute of Administration), ( ). - Data Structures, in the programme of Programming of INA ( ). - Computer Architecture (1984), Data Structures ( ) and Operating Systems ( ), in the programme of Systems Programming of INA. - Data Structures, in the programme of Advanced Programming Techniques of INA ( ). - Knowledge-based Systems and Hybrid Systems, in the programme of Advanced Programming Techniques of INA ( ). - Systems Integration, in the programme of Technologic Engineering Infrastructures of INA ( ). Use of Microcomputers in Management and Microcomputers for Professionals, INA ( ). L. M. Camarinha-Matos 7

12 DBase II and Lotus 1-2-3, in the programme Microcomputers a management tool, NORMA / IPE, for Management staff / CEOs of IPE (Instituto de Participações do Estado), Data Structures and Introduction to Knowledge Bases, in the programme of Systems Analysis of DTIM (Funchal, Madeira, 1986) Coordination Responsible for the course of Operating Systems at Citeforma ( ). Responsible for the following programmes at INA: - Systems Programming ( ) - Advanced Programming techniques ( ), - Programming Fundamentals (since 1994), - Informatic Infrastruictures Engineering ( ). 3.6 Other activities Courses Organization of the course "Software Engineering Economics and Software Development Project Management", FCT/UNL, 20 Sept - 1 Oct 1982, in collaboration with the Portuguese Computer Science Association. Teaching of "Distributed Artificial Intelligence in Computer Integrated Manufacturing" in the Advanced Summer School on Distributed Artificial Intelligence, APPIA, Troia, Portugal, Sept Organization of an international course on "COMETT PrintSim Course on Teaching and Training with Print Simulators in Multimedia Environment", Uninova, Monte Caparica, 3-5 March Organization of the course STEP / PDM and the Portuguese SMEs, Uninova, 11 Mar Teaching of Virtual Enterprises and other Collaborative Networks in the BEST Summer School, Monte Caparica, Portugal, Aug Supervision of trainees and short term visitors Organization and supervision of training programmes for visitors at FCT/UNL and Uninova: Ricardo Rabelo, Federal University of Santa Catarina, Brazil, [1 year], 1988/1989. Dr. Hannu Ahonen, VTT, Finland post-doc [1 year], L. M. Camarinha-Matos 8

13 Prof. Francisco Negereiros, Federal University of Espirito Santo, Brazil, [2 months] Krasen Kratchev, University of Varna, Bulgaria, [2.5 months], Georg Ulicny, University of Brno, República Checa, [2.5 months], Freddy Rojas, University of Costa Rica, [2 weeks], Wanderley Liu, University of São Paulo, Brazil, [3 weeks], Nov Vladimir Oplustil, University of Brno, Czech Republic, [2.5 months], 1994 Dr. Dimitar Georgiev, University of Varna, Bulgaria, [2.5 months], Prof. Zahary Popov, Technical University of Varna, Bulgaria [2 weeks], Dr. Pavel Osmera, Technical University of Brno, Czech Republic [2 weeks], Attilio Provedel, Federal University of Espirito Santo, Brazil [2 weeks], Nov. 95. Kiril Kirov, Technical University of Varna, Bulgaria [2 weeks], Orlin Kovatchev, Technical University of Varna, Bulgaria [2.5 months], Prof. Kolibal, Technical University of Brno, Czech Republic [2 weeks], Kral, Technical University of Brno, Czech Republic [2.5 months], Jorge Pellicer, Universidad Nacional de San Juan, Argentina, [2 weeks], Jun Emil Lupu, Romania [6 months], Luciana Frigo, Federal University of Santa Catarina, Brazil, [5 months], Sept 99 Feb Prof. Aurelian Stanescu, Polytechnic University of Bucarest, Romania, [2.5 weeks], Oct-Nov 99. Janeta Culita, Polytechnic University of Bucarest, Romania, [2 months], Oct-Nov 99. Prof. Aurelian Stanescu, Polytechnic University of Bucarest, Romania, [1 week], 2001, Mauro Onori, Sweden, [1 month], Jul Edmilson Klen, Federal University of Santa Catarina, Brazil, [4 months], Sept-Dec Dario Franco, Polytechnic University of Valencia, Spain, Nov 05-Jan Teaching materials Although not as formal publications, the following teaching support materials were prepared (in Portuguese): Estruturas de Dados - uma primeira introdução, (L.M. Camarinha Matos), for the course of Data Structures of the Systems Analysis programme of INA, Introdução aos Sistemas de Exploração, (L.M. Camarinha Matos), for the course of Operating Systems of the Systems Analysis programme of INA, Introdução Prática aos Sistemas DBase II e Lotus 1-2-3, (L.M. Camarinha Matos; F.J. Moura Pires; José F. Cruz; Conceição Lira; Alvaro Bonito) for the course of Microcomputers a management tool, of NORMA/IPE, L. M. Camarinha-Matos 9

14 Estruturas de Dados e Introdução às Bases de Conhecimento, (L.M. Camarinha Matos), for the course of Systems Analysis programme, DTIM-Associação Regional para o Desenvolvimento das Tecnologias de Informação na Madeira, Funchal, Robótica - Notas de apoio Handouts for the Robotics course, FCT/UNL, 1990 (with updates in the follwoing years). Complementos de Robótica - Notas de apoio, (L.M. Camarinha Matos; L. Correia; J.M. Pires; D. Ferreira; J. Afonso), handouts for the course on Complements of Robotics, FCT/UNL, 1987/1988. Organização de Informação e Computadores, (L.M. Camarinha Matos), handouts for the course on Information organization and Computers, FCT/UNL, Sistemas de Tempo Real, (L.M. Camarinha Matos), Handouts for the course on Real Time Systems, FCT/UNL, 1995(with updates in the following years). Modelação de Dados em Engenharia, (L.M. Camarinha Matos), handouts for the course Data Modeling in Engineering, FCT/UNL, 1994 (with updates in the following years). Sistemas de Informação CIM, (L.M. Camarinha Matos), handouts for the course on CIM Information Systems, FCT/, 1992 (with updates in the following years). Sistemas de Informação Multimedia, handouts for the course on Multimedia Information Systems, FCT/UNL, Organization of slides and other support documents for the courses on: Virtual Enterprises, Systems Integration, Telerobotics and Autonomous Systems, Distributed Manufacturing Systems, Scientific Research Methodologies and Techniques. L. M. Camarinha-Matos 10

15 4. SCIENTIFIC ACTIVITIES 4.1 Main areas of interest Collaborative Networks (e.g. Virtual Enterprises, Virtual Organizations, Professional Virtual Communities, Virtual Organization Breeding Environments), Systems Integration (integration of manufacturing systems, CIM, integration in enterprise networks). Intelligent Manufacturing Systems (intelligent robotics, intelligent supervision, machine learning, multi-agent systems). 4.2 Research activities before the PhD Member of the team involved in the analysis of the requirements for the Informatics Center of the National Institute of Engineering and Industrial Technology, Lisbon, Installation and adaptation of embeded systems software (1980): Programmin of CP/M and MP/M "device drivers" Intellec and Icom systems; software for an associative memory based architecture (REM-100) on top of Multibus. Design and development of a robot cell oriented task level programming system at ( ). Participation in the design and coordination of the TELEPONTO project a real-time programming system in collaboration with the Centrel enterprise (1980/1982). Participation in the UNIROB national project on Robotics, Joint project among the New university of Lisbon, University of Coimbra, and University of Porto, funded by the Portuguese Ministry of Industry. Design and research in the ESPRIT 623 project ( ). Collaboration in the ESPRIT 278 project (1986/87). Participation in the Ibero-American project (CYTED) on "Robótica y Automatización Avanzada" ( ), in the area of "Cell design and planning. Participation in the UNIDO project on "Industrial Robotics Applications" ( ), area of "CIM Information System". L. M. Camarinha-Matos 11

16 Participation in the "Robotics & CAD/CAM", funded by the Luso-American Foundation for the Development (1986/87) integration of CAD-Knowledge bases, CAD models in robotic station programming. Participation in the Esprit Basic Research Action "Working Group on Vision - Subgroup: B-Learn - acquisition of behavioral knowledge for autonomous systems operating in real environments" ( ). 4.3 Research activities after PhD Promotor and scientific director of the following projects National projects SARPIC - Sistemas Autónomos em Robótica e Produção Integrada por Computador (Autonomous Systems in Robotics and Computer Integrated Manufacturing), Project JNICT PMCT/C/MPF/842/90 (Sept 1990-Aug 1993). CIM-CASE: Ferramentas de apoio à concepção de sistemas integrados de produção (Tools to support the design of integrated manufacturing systems), Project JNICT PBIC TIT/1169/92 (Dec 92 - Nov 95). Videoteca Robotizada (Robotized videotec] ( ), funded by SIBS. PRAXIS XXI TeleCARE: Um sistema de supervisão multi-agente para apoio à terceira idade (A multi-agent system for elderly support), (Jun 99 May 2001) [Prime contractor]. International projects (coordination of international consortia) CIMIS.net - EC-Latin America Exploratory Collaborative Activity ECLA004: Distributed Information Systems for CIM, (Jan 1993-Jun 1996) [Prime contractor]. FlexSys - EC-Latin America Exploratory Collaborative Activity ECLA003: Design of FMS/FAS systems for SMEs, (Apr Jun 1996) [Prime contractor]. INCO-DC SCM+: Beyond Supply Chain Management in Food Industry, (Apr 1996-Sept 1997) [Prime contractor]. Esprit PRODNET II: Production Planning and Management in an Extended Enterprise (Oct 1996-Sept 1999). INCO-DC KIT MASSYVE: Multi-Agent Agile Manufacturing Scheduling Systems in Virtual Enterprise Industry, (Oct 97-Dec 2000) [Prime contractor]. IFIP TC5 COVE: COoperation infrastructure for Virtual Enterprises and electronic business, (Dec 99 Dec 2001). L. M. Camarinha-Matos 12

17 IST TeleCARE: A Multiagent Telesupervision System for Elderly Care, (Jun 2001 Jun 2004) [Prime contractor]. IST THINKcreative: Thinking network of experts on emerging smart organizations, (Jul 2001 Mar 2004 [Prime contractor]. IST VOmap: Roadmap design for collaborative virtual organizations in dynamic business ecosystems, (Jul 2003 Jun 2003) [Prime contractor]. IST Integrated Project ECOLEAD: European Collaborative Networked Organizations Leadership Initiative, (Abr 2004 Jun 2008). ICT epal: extending Professional Active Life (FP7 program), (Feb 2008-Jan 2010). In the case of the mentioned internacional projects, besides the contribution as researcher, was also resposnible for the technical / scientific coordination of the corresponding international consortia as well as initiator and responsible for the ellaboration of the project proposals Responsible for the UNL/Uninova team in the following international projects Value EPDT: Exploitation plan for Product Data Technology related research (1995). Esprit PRODNET I: Production Planning and Management in an Extended Enterprise (1995) (Exploratory Action). Cooperation with Hungary: Design of Flexible Manufacturing Systems ( ). Esprit WATERNET: Knowledge Capture for Advanced Supervision of Water Distribution Networks (Jun 1996-May 1998). Esprit LogSME ( ). PRAXIS MAGMEC: Sensores de campo magnético para posicionamento e monitorização de corrente em Mecatrónica (Magnetic field sensors for positioning and monitoring in mechatronics) (Jun 97 - May 2000). Esprit ESCN: European STEP Centres Network (Nov Oct 1999) INCO-DC ProSME: Easy-to-Use Procedures for Quality Management tailored for SMEs (Feb Jan 2001) COMME AGATHE: Communication Multi-Agents por l Atelier (Cooperação MCT Embaixada de França) (Jan Dec 2003) IST FETISH: Federated European Tourism Information System Harmonization (Jan Dec 2001) IST VOSTER: Virtual Organizations Cluster (Dec 2001 Jul 2004) GROWTH Assembly Net (Oct 2001 Aug 2004) IP EUPASS: Evolvable Ultra-Precision Assembly Systems (Feb 2005 Jan 2008) L. M. Camarinha-Matos 13

18 ICT BRAID: Bridging Research in Ageing and ICT Development (Fev 2010 Jan 2012) Researcher in the following projects Esprit CIM-PLATO CIM Planning Toolbox (May 89 - Oct 1992). Esprit Basic Research B-LEARN II : Behavioral Learning - Combining sensing and action (Sept Aug 1995). PEDIP Infrastructures Center of Intelligent Robotics of Uninova ( ). Ibero-American Network (CYTED-D) SIPROFLEX: Sistemas Integrados de Produção Flexível (Integrated Flexible Production Systems) ( ). PRAXIS TOD-PME 83/3.1/CEG/2638/95): Desenvolvimento técnico-organizacional em ambientes complexos de produção (Techno-organizational developments in complex production systems ( ). ESPRIT KNITE Moderator of the Forum on Organization of Information Systems for Tourism (Jun - Dec 1999) Responsible for the UNL/Uninova team in the follwoing networks Esprit ICIMS-NOE: Network of Excellence in Intelligent Control and Integrated Manufacturing Systems ( ). EPDEN: European Product Data Exchange Network ( ). IST CE-NET II: Concurrent Enterprise Network of Excellence (Jan 2001 Ago 2003). 4.4 Supervision of post-graduation students Supervision of PhD works (8 concluded, 5 ongoing), MSc (9 concluded, 1 ongoing): Concluded PhD thesis supervision L. M. Camarinha-Matos 14

19 Helder Pita (1995) [Concepção de arquitecturas para ambientes integrados de manufactura - Um sistema de apoio baseado em planeamento hierárquico interactivo], FCT/UNL. Ricardo Rabelo (1997) [Um enquadramento para o Desenvolvimento de Sistemas de Escalonamento Ágil da Produção Uma abordagem multiagente], FCT/UNL. Luis Filipe de Seabra Lopes (1998) [Robot Learning at the Task Level A study in the assembly domain], FCT/UNL. Fernando José Martinelli (2001) [Contribuição para uma metodologia de aplicação de aprendizagem automática em ambientes industriais], FCT/UNL. Walter Jorge Mendes Vieira (2001) [Agentes móveis adaptáveis para operação remota], FCT/UNL. Celson Pantoja Lima (2001) [Um modelo multinível de coordenação em ambiente de empresa virtual: Uma abordagem baseada no conceito de fluxo de trabalho], FCT/UNL. José Barata Oliveira (2004) [Coalition based approach for shop floor agility A multiagent approach], FCT/UNL. António Feliciano Abreu [2007] [Contribuição para o desenvolvimento de uma teoria das redes de colaboração], FCT/UNL. L. Octávio Castolo (2008) [Collaborative networks in elderly care A mobile agents approach], FCT/UNL. João Rosas [2010] [Assessing organizations collaboration readiness A behavioral approach], FCT/UNL. MSc thesis supervision Fernando Martins (grade: Very Good, Mar 1995) [Sistema de apoio à selecção de aplicações para CIM], FCT/UNL. José Barata Oliveira (grade: Very Good, Abr 1995) [Modelação e integração em sistemas flexíveis de produção], FCT/UNL. Raúl Mendes Dionísio (grade: Good, Mar 1997) [Protocolo HOLOS: Uma proposta para a comunicação entre agentes em sistemas de escalonamento da produção], FCT/UNL. Rui Melo (grade: Very Good, 13 Jan 2000) [MARS: Mobile Agents for Remote Supervision], FCT/UNL. Nuno Oliveira (grade: Very Good, 26 Jun 2000) [Suporte à Cooperação no Âmbito da Engenharia Concorrente sobre a Internet], FCT/UNL. Tiago Figueiredo Cardoso (grade: Very Good, 4 Dec 2002) [Sistema de coordenação de actividades em organizações virtuais no sector do turismo], FCT/UNL. Filipa Alexandra Moreira Ferrada (grade: Very Good, 13 Sept 2006) [TeleCARE Time Bank - A Virtual Community in the Elderly Care Domain], FCT/UNL. Ana Inês da Silva Oliveira (grade: Very Good, 14 Nov 2006) [Multi-agent infrastructure for elderly care support], FCT/UNL. L. M. Camarinha-Matos 15

20 Thesis of Pedagogic Skills and Scientific Capabilities (eq. to MSc.) João Moura Pires (grade: Very Good, Nov 1991) [Modelos de Raciocínio com Incerteza e Imprecisão], FCT/UNL Ongoing PhD thesis supervision Patrícia Macedo (since Oct 2005) [Value systems in collaborative networks]. Tiago Cardoso (since Nov 2006) [Service planning and combination in collaborative networks]. Filipa Ferrada (since 2008) [Self-healing in collaborative networks]. Ana Inês Oliveira (since 2008) [Negotiation in collaborative networks]. Reza Vatankhah (since Dec 2009) [Virtual enterprises in manufacturing], co-supervision, Eastern Mediterranean University, North Cyprus. Member of the Thesis Supervision Committee of Paula Ventura Martins, IST (since 2004). Member of the Thesis Supervision Committee of Henrique Cardoso, FEUP (since 2007). 4.5 Evaluation of projects and project proposals Evaluation of projects Reviewer of Project Esprit 5416 "CIM-DATA - Computer Integrated Manufacturing Data" ( ). Coordinator of the review team for the project "NORMLOG - Sistemas de Informação de 5ª geração: Desenvolvimento centrado em normas" [Fundação Luso-Americana para o Desenvolvimento], Reviewer of Project Esprit COMIND ( ). Reviewer (team chair) of Project Esprit DELPHI ( ). Reviewer of Project Esprit CHAMAN ( ). Reviewer of technical report of Project Telematics COBIP (1999). L. M. Camarinha-Matos 16

21 Reviewer of Projects in the Programme PROTEM-CC, phase III, CNPq (Brazil), Jun Reviewer of Project IST SOL-EU-NET ( ). Reviewer of Project IST CAWICOMS ( ). Reviewer of the portfolio of projects IST in the area of Smart Organizations ( ) Evaluation of project proposals Evaluator of project proposals submitted to the following programmes: Programme KIT (Keep-in-Touch), European Commission, Programme PROTEM-C, CNPq, Brazil, Programme INCO Fellowships to Japan/Korea, European Commission, Orient Foundation, Scholarships / Informatics Engineering projects, Cooperation Portugal - Brazil, Programme JNICT / CNPq, Orient Foundation, Scholarships / Informatics Engineering projects, Programme INCO COPERNICUS, European Commission, Programme INCO Fellowships to Japan/Korea, European Commission, Programme ESPRIT / Integration in Manufacturing, European Commission, Programme PRAXIS XXI, Agência de Inovação, Programme ESPRIT / Integration in Manufacturing, European Commission, Programme ESPRIT / Long Term Research, European Commission, Programme PRAXIS XXI, Agência de Inovação, Programm ESPRIT / Integration in Manufacturing, European Commission, Programme PRAXIS XXI, Agência de Inovação, Programme ESPRIT / Long Term Research, European Commission, Programme Investigación Científica y Tecnológica, Agencia Nacional de Promoción Científica y Tecnológica, Argentina, 1998, Programme Iniciativa Comunitária PME (IC-PME), Agência de Inovação, Programme PEDIP (PRODIBETA), INETI, April Programme Iniciativa Comunitária PME (IC-PME), Agência de Inovação, Programme IST Fellowships to Japan, European Commission, L. M. Camarinha-Matos 17