N O L I M I T. // 2009 // product catalog

Transcription

1 N O L I M I T // 2009 // product catalog

2 regulators 2 buoyancy 6 vehicle 9 rebreather 10 instruments 12 lights // fins // masks 14 drysuits 16 // Whether your personal mission is an expedition into the farthest cave systems, to view the mystery of a shipwreck, or to experience the wonder of a coral reef, our equipment will take you there with confidence. That s a promise. // Our Mission: To design and manufacture the best underwater products and help those who share our passion for diving begin their journey, wherever it may lead. comparison charts 18 Design: Dept29 Cover Photography: Ernie Brooks Location Photography: Doug Arnberg ( Product Photography: Bill Baker

3 2 regulators regulators 3 // 212 2nd Stage From extensive research, engineering and design, the 212 earns perfect scores by Scuba Diving Magazine. Whether it s a dive to 330ft / 100m with a 3 hour run time or a reef dive to 30ft / 10m, the 212 is designed to be the best in performance. A pneumatically balanced second stage reduces breathing resistance to near zero and responds to the slightest inhalation. // DC1 1st Stage Breathe with confidence, knowing you have 30 years of regulator design and machining behind you in the DC1 1st Stage. High Performance over-balanced 1st stage provides progressively greater intermediate pressure as depth and gas density increase for superior gas delivery under the most extreme conditions. Patented Dynamic Adjustment automatically maintains inhalation effort throughout the dive Patented Orthodontic Mouthpiece with High-Density Bite Tabs Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch Available with the DC1, DC2 and DC3 Swivel turret allows for ideal hose routing Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage Designed to withstand the rigorous CE standard for coldwater performance Nitrox compatible to 40% 2 high pressure ports 4 low pressure ports Yoke or 300 BAR DIN // 221 2nd Stage // DC2 1st Stage The 221 is designed for those divers that believe keeping it simple is best. The 221 uses the same technology of the 212 without the dynamic adjustment knob. Pneumatically balanced second stage Patented Orthodontic Mouthpiece with High-Density Bite Tabs Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch Available with the DC3 While pushing the limits on strenuous dives, be confident that the performance and reliability of the DC2 Forged 1st Stage will never hold you back. Forged manufacturing process provides ultimate design control over internal air path for superior air delivery and compact size. Environmental sealing prevents internal corrosion, contaminants, and icing CE tested & rated for coldwater performance Nitrox compatible to 40% 2 high pressure ports 4 low pressure ports Yoke or 300 BAR DIN

4 4 regulators regulators 5 // 321 OCTOPUS This octopus is designed on the same platform of 221 2nd Stage. Pneumatically balanced second stage Patented Orthodontic Mouthpiece with High-Density Bite Tabs High visibility yellow front cover Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch Comes standard with a 36in / 91cm yellow hose // DC3 1st Stage Built with the same quality as the DC1, without the swivel turret, the DC3 is the ideal 1st stage for double cylinder configuration as well as perfect for single cylinders. Over-Balanced first stage provides superior performance at greater depths Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage Designed to withstand the rigorous CE standard for coldwater performance Nitrox compatible to 40% 1 high pressure ports 4 low pressure ports Yoke or 300 BAR DIN // H-O2 Tech Regulator With the bulletproof design of the Hollis HP5 1st stage the H-O2 Tech regulator is certified for up to 100% oxygen service. With highly specialized components, materials and manufacturing processes the H-O2 Tech is the perfect DECO regulator. It is a classic design that has proven its reliability many times over. Add O2 compatibility and you have a regulator that will get you through every DECO hang without a second thought. Exceeds CE performance standards and out performs every competitor in its class Absence of internal chrome plating which has been shown to contribute flash combustion HP seat composed of Dyneon 3M which has exceptional heat resistance, chemical resistance and doesn t support combustion Indestructible unbalanced piston design Comes standard with 300 BAR / 4500 PSI DIN 40in / 101cm regulator hose Cleaned and assembled in a clean room environment Patented Orthodontic Mouthpiece // DIN CONNECTOR Allows you to change from yoke connector to DIN connection // DIN TO YOKE CONVERTER Allows you to convert existing DIN to yoke in seconds // HOSES High Pressure LP Regulator LPQD 6in / 15cm, 24in / 61cm and 28in / 71cm 22in / 56cm, 30in / 76cm, 40in / 101cm, 60in / 152cm and 84in / 213cm 22in / 56cm, 24in / 61cm, 30in / 76cm and 32in / 81cm

5 6 buoyancy buoyancy 7 // HTS // HARNESS TECHNICAL SYSTEM Easily switched from a single tank soft pack to a dual tank backplate system the HTS modular capabilities can be personalized to any divers needs. Streamlined modular harness system with comfort back pad and lumbar support Adjustable padded shoulder straps with quick release buckles and SS D-Rings Two Cam Straps included Comes standard w/ adjustable Velcro cummerbund (removable) Optional 10lb / 4.5kg interchangeable quick release weight pockets w/ stainless steel D-rings Comes standard w/ crotch strap 2in / 5.1cm webbing with scooter ring (removable) Sizes: SM, MD, LG, XL // Solo Designed to meet all the needs of demanding technical divers; the Solo Harness System is clean, simple and fool proof. No need to look anywhere else the Solo is the system to take you there and get you back. Streamlined design enhances comfort with less drag Continuous one piece harness system Stainless steel D-rings and cam buckle included Removable shoulder pads accept stainless steel D-rings Aluminum or Stainless Back Plate sold separately // X Series Wings // 37lb / 17kg + 55lb / 25kg With its streamline design for reduced drag, the X Series bladder is compact, clean and perfect for use with a double rig. Whether it is in a tight cave or deep wreck penetration the X Series will perform denier Cordura 15mm urethane internal bladder Streamlined design is good for tight spaces with reduced drag Lower left pull relief valve Centrally located elbow to avoid tank valve/regulator interference Cam band slots Available in either 37lb / 17kg or 55lb / 25kg lift bladder // S Series Wings // 25lb / 11.5kg + 38lb / 17.3kg The S Series bladder is designed for optimum balance and comfort. This circular bladder is compact, clean and perfect for a streamlined single tank rig. // ELITE Tech/Rec is at its best with the Elite Harness. The Elite offers you all the features of a technical harness with the added comfort that the everyday diver has come to expect. // SWITCHBACK The Switchback is clean and strong. The cross back construction, sternum strap and a left shoulder release buckle provides easy donning and doffing denier nylon outer shell and 420 denier PU coated nylon internal bladder coated with 7mm PU lamination Streamlined design is good for tight spaces with reduced drag Lower left pull relief valve No single tank adapter needed Cam Slots and removable tank cradle included Available in either 25lb / 11.5kg or 38lb / 17.3kg lift bladder Streamlined modular harness system with comfort back pad and lumbar support Adjustable shoulder straps w/ quick release buckles provide easier donning and doffing of equipment Shoulder pads w/ 2 adjustable SS D-Rings and 2in / 5cm crotch strap Aluminum or Stainless Back Plate sold separately Optional 10lb / 4.5kg interchangeable quick release weight pockets w/ stainless steel D-rings Sizes: XS/SM, MD/LG, XL/XXL Left shoulder buckle release Cross back shoulder provides better weight distribution and balance Sternum strap for greater stability and fit Stainless steel D-rings and cam buckle included Aluminum or Stainless Back Plate sold separately // BAC Series Wings // 65lb / 29.5kg; 85lb / 38.6kg + 85lb / 38.6kg Dual For those who need it all, the BAC Series is for you. Increased lift capacity, retraction bungee straps (removable), and valves correctly located for doubles make this bladder ready for any dive denier Cordura w/ PU lamination outer shell with 15mm urethane internal bladder Centrally located elbow to avoid tank valve/regulator interference and lower left pull relief valve Comes w/bungee straps (removable) Cam band slots Available in either 65lb / 29.5kg, 85lb / 38.6kg or 85lb / 38.6kg Dual lift bladder

6 8 buoyancy vehicle 9 // ATS // Advanced Technical System Designed as the ultimate sport diving BC, the ATS leaves nothing to be desired. Available in four sizes: 37lb / 16.8kg lift SM & MD or 47lb / 21.3kg lift LG & XL 1000 denier Cordura w/ PU lamination outer shell & 15mm urethane internal bladder Contoured, lightweight backpack w/back pad, lumbar support, and a rolled neoprene comfort neck Adjustable shoulder straps with 4 shoulder stainless steel bent D-rings 10lb / 4.5kg interchangeable quick release weight pockets w/stainless steel D-rings Right shoulder pull dump and lower left pull dump 2in / 5.1cm web waist strap with stainless steel cam buckle Crotch strap 2in / 5.1cm webbing with scooter ring (removable) // HD 100 The HD100 is everything the advanced sport diver could ask for. This unique BC is tastefully fitted with a blend of Tech/ Rec features that provide ultimate comfort and function. Combined with its heavy duty construction and innovative design, this is sport diving at its best. Available in four sizes: 34lb / 15.4kg lift SM & MD or 38lb / 17.2kg lift LG & XL 1000 denier Cordura & 15mm urethane internal bladder Contoured, lightweight backpack w/back pad, lumbar support, and a rolled neoprene comfort neck 2 shoulder stainless steel bent D-rings, 2 lower hip D-rings, and 4 rear stainless steel D-rings (for canister lights, dry suit inflation bottles, reels, etc.) Adjustable shoulder straps w/quick release buckles 10lb / 4.5kg interchangeable quick release weight pockets and 5lb / 2.27kg non-dump able rear weight pockets Large zippered pockets on both sides with Knife mounting grommets Right shoulder pull dump and lower left pull dump Adjustable Velcro cummerbund (removable) // H-160 Hollis has again raised the bar in manufacturing with the H-160. This new innovative DPV sets the standards for tow behind vehicles. With 60lbs / 22.6kg of thrust and a depth rating of 656ft / 200m the H-160 is the DPV of choice. With removable trim weights you have the perfect trim for salt or fresh water diving. The H-160 is operable with one hand and has a trigger switch that allows divers to vary between power settings of 50%, 75% or 100%. Select the power setting and use the thumb lock to set the underwater cruise control. All of these features make the H-160 the DPV of choice for cave, wreck, technical and recreational diving T6 aluminum construction, hard anodized, with a marine finish 9 point adjustable propeller pitch Redundant electronic and mechanical clutch Graduated start for smooth and controlled speeds H provides 60lb / 22.6kg of thrust Ni-Mh Battery Pack 1 hour burn time at 100% power with full charge (burn time of 2 hours at 50% power use) 3 power settings: 50%, 75% and 100% with shift on the fly capabilities Depth rating: 656ft / 200m (deepest operating scooter on market) Weight: 48lb / 22kg Redundant seals in all compartments Integrated 3x3W High Intensity LED Bulbs with optimized reflector design (optional) User accessible battery pack (no tools required) Selectable input (110v / 220V) automatic charger 5 hour recharge Smart electronics to protect the motor and battery Magnetic Reed switch Perfect balance in the water for easy handling Height 28.75in / 73.03cm, diameter of body 8.5in / 21.59cm, and diameter at prop shroud 14.25in / 36.2cm

7 10 rebreather rebreather 11 // PRISM 2 // HOW THE PRISM 2 REBREATHER WORKS TThe Prism 2 Closed Circuit Rebreather provides divers a proven platform to explore the underwater world. Based on the technology of the PRISM Invader the PRISM 2 offers more performance and features to divers than any rebreather currently on the market today. Its radial scrubber provides the lowest breathing effort and the most efficient scrubber design. That along with a primary HDD (Heads Down Display) allows the diver to continuously monitor oxygen levels hands free. Radial scrubber design provides lower resistive breathing effort and more efficient scrubber use. Five hours duration with 6lb / 2.7kg of loose grain scrubber material Primary HDD (Heads Down Display) is a battery driven sequential LED, for continuous hands free monitoring of the oxygen levels. Independent Analog Secondary Display continues to work in the event of power or electronics failure O supply lines and solenoid are external 2 from the breathing loop. Pre-Dive user selectable PO2 Set Points (0.7, 1.0, 1.2, 1.3, and 1.4) Standard Diluent and O bottle size 2 19ft³ / 2.7L but can accommodate larger size cylinders Electronics and the battery are housed outside the breathing loop Uses a standard 9V alkaline battery for electronics; 40 hours on battery Convenient purge drains at the base of each counterlung Counterlungs mounted over the shoulder to decrease work of breathing 3 O sensors for redundant and reliable 2 oxygen management. These power the analog secondary display Ergonomic Hollis 410 inline alternate inflator used as an onboard diluent bailout 10lbs / 4.5kg quick release weight pockets The Prism 2 gains gas efficiency by circulating breathing gas in a breathing loop, unlike an open circuit regulator that dumps the exhaled gas with each breath. The Prism 2 maintains safe oxygen levels, removes CO 2 from the breathing loop, and delivers warm breathing gas to the diver. // The Prism 2 breathing loop cycle: 1. Oxygen tank provide the source gas. 2. Diluent tank (air, trimix or heliox) provide the source gas. 3. Exhaled gas enters the breathing loop, and a one-way valve inside the Dive Shutoff Valve (DSV) directs the breath to the right side counter lung. 4. The right side counter lung is the location of the manual oxygen addition valve and system over pressure relief valve. 5. The exhaled gas then enters the scrubber canister where the carbon dioxide is removed. 6. Gas leaving the scrubber passes the three O 2 sensors which analyze the breathing mix, and the Prism 2 electronics add oxygen as required. 7. The breathing gas passes through the left side counter lung where the manual diluent addition valve is located, and maintained gas volume is available for breathing. 8. Gas leaving the left counter lung travels again through a one-way valve in the Dive Shutoff Valve (DSV) The gas is inhaled by the diver, and the next exhalation begins the cycle again. 2 Length in / 53.3cm Buoyancy... Neutral Integrated Weight System Yes O 2 Sensors... 3 galvanic Senor Life months in air /100 hours dive time Battery Type volt Counter Lungs... Over the Shoulder O 2 Bottle Sizes Compatible s, 19 s; 30 s(cuft) / 1.9, 2.7; 4.4 (liters) Width in / 43.2cm Weight... 47lb / 21.4kg PO 2 Set Points... Adjustable (0.7, 1.0, 1.2, 1.3, 1.4) Scrubber Duration fsw, 40F, Heads Down Display Yes, Battery Powered Sequential LED Battery Life hrs Diluent Bottle Sizes Compatible.. 13 s, 19 s; 30 s (cuft) / 1.9, 2.7; 4.4 (liters) 1.3L/min CO2,0.5%CO2 SEV Depth... 9in / 22.9cm Scrubber Flow Design... Radial Automatic Setpoint Switch ft / 6.1m on Descending, Analog PO 2 Display (Secondary). Yes, powered by O 2 sensors Alternate Inflator Bail Out... Yes (Hollis 410) 18 ft / 5.5 m on Ascent

8 12 instruments instruments // Full-Face Datamask The Hollis Datamask provides dive data closer than ever before. The view of the computer screen is unobstructed in any condition including heavy silt and darkness. Nothing comes between a diver and the information they need, when they need it. The Datamask has become the tool of choice for Military Special Forces and Dive Rescue Teams. With the new added modular full-face design one can breathe without jaw fatigue, protection from accidental drowning, face protection in the coldest of waters, and the ability to mount a communications system. Unlike other full-face systems the diver is free to switch to any gas source at anytime without the removal or flooding of their mask. Patented in mask dive computer display Air, Nitrox (up to 50%), and Gauge Modes // DG 01 // Depth gauge 01 Developed for military applications the DG 01 is a digital bottom timer that also doubles as a powerful navigation aid Two operation modes (Normal and Navigation) Ability to store pre-set navigation legs (with headings and a countdown timer for each leg) 400fsw / 120msw max operating depth Two ascent rates to choose from (Navy or Sport) User replaceable battery On/Off Audible Alarms Backlight for use in low visibility Manual or wet activation Chronograph setting Altitude adjusting PC Download/Settings Upload Software and Cable Wireless air integrated technology Max operating depth 330ft / 100m in Depth Gauge Mode Patented Air Time Remaining Algorithm Audible alarms with alarm acknowledgement Backlighting may be adjusted underwater for brightness as well as full-time or on demand use Includes PC Download/Settings upload Software and Cable // DG 01 // with Compass + NAV Board When the military was looking for a more precise, accurate navigation system the end result was the Hollis NAV Board with the DG 01 bottom timer. An oversized compass that is easy to read from many angles with a extremely durable polyethylene mounting board. The attached webbed strap allows for the board to be tethered to the diver while allowing the board to be extended forward, an addition clip connects to the diver for surface situations. Oversized compass allows for wide operating angles and easy to read dial Board composed of polyethylene for lightweight durability Diver replaceable batteries // DG 02 // Dive Computer + Digital Bottom Timer The DG 02 can be used in two modes either a single gas nitrox dive computer or a digital bottom timer. DG02 uses the Pelagic Z+ modified Buhlman Algorithm with deep stops. All the expected features are here including back lighting for low visibility situations, audible alarms, automatic altitude adjustment and manual or wet activation. Two operation modes (Single Gas Nitrox Computer and Digital Bottom Timer) 400fsw / 120msw max operating depth as bottom timer or 330fsw / 100msw as computer User replaceable battery On/Off Audible Alarms Backlight for use in low visibility

9 lig ht s // f ins // masks lights // fins // m asks // 3x 3 LED Light Head // and 12V 9AH Canister Battery Pack // F1 FIN The Hollis 3x3 LED light head and its accompanying canister battery pack make a powerful combination for night, low light and silt situations. Both the head and battery canister are made of 6061 T6 aluminum construction with hard anodized coating that allows for durability up to 500ft/152m. Power without compromise, the Hollis F1 blends graceful movement, power and bulletproof construction. For years all that divers wore were heavy duty rubber fins for their durability and they lasted for years. Now the F1 returns with refined design combined with classic features that offer the best of both worlds. The 3x3 head was designed with several unique features, all the controls are on the light head, including a magnetic switch which provides easy access to controls and prevents accidental activation of the light. The switches are easily accessible with cold water gloves. Then add the combination of a 4mm bora silicate ultra clear lens, high intensity LED bulbs with optimized reflector design, color light temperature of 5500 Kelvin and divers get superior light with less power and clear unfiltered light and truer underwater colors. The battery canister also provides several advantages. The 12V 9Ah Ni-Mh (nickel metal hydride battery pack) provides up to a 10 hour burn time with a rapid 5 hour charge time. 3x3W High Intensity LED Bulbs with optimized reflector design Light color temperature: 5500 Kelvin External charging ports All controls on light head No tools required to change battery Swivel ring magnetic switch Adjustable hand grip that attaches to swivel ring magnetic switch Smart electronics that protect the battery in case of a power overload High grade, heavy duty rubber construction Spring heel straps with easy-grip heel tab and adjustable settings for fine tuned fit Generous foot pocket with three sizes: RG, XL, XXL Separate charger adaptor to charge battery outside canister Double sealed cap Max Depth: 500ft / 152m // 3x 3 LED Torch // M1 Onyx Mask // M2 Mask Extremely durable aluminum body and black anodized frame stacked with a tri-lens reflector and tempered glass with a 6 degree beam. The Torch features a double sealed mechanical switch and 8 hour burn time for intense light dispersion to a max depth of 650ft / 200m. The Hollis 3x3 LED is a powerful torch unique for its size and weight. Visibility is the most important aspect of any dive. The M1 Onyx Mask raises the bar for optical quality and distortion free vision. The M2 Mask offers what all divers want comfort and expanded field of vision in a low volume mask DIVE // w ww. h o l l i sg e ar. co m Tempered glass lens with Fresnel dome allows more unfiltered light Three 3W Luxeon LED's provide up to 375 Lumens Double sealed mechanical switch with Security Lock 10,000 hour lifespan LED bulbs Minimum 8 hour full power burn time with diminishing output for up to 40 hours Double O-Ring Seals Max Operating Depth: 650ft / 200m Frameless Silicon Mask St. Gobain Glass Ultra Clear Lens Stainless Steel Buckles Black Oxide Wide Vision and Low Volume Metal Rim Silicon Mask St. Gobain Glass Ultra Clear Lens Wide Vision and Low Volume

10 16 drysuits undergarments 17 // BIODRY FX100 (left) + BIODRY BX200 (right) The BIODRY is available in self donning Front Entry or Back Entry design. Using an improved Bioflex WearForce material produces a very light weight and low maintenance dry suit. This suit will allow you to enter into any environment. Resistant to most chemicals that divers may encounter Washable with soap and water Does not absorb water WearForce material is very low profile and reduces drag in the water Seams sewn and double taped for extreme protection against leaks Latex seals Low Profile Si-Tech Inflator and Dump Valves Heavy duty PVC knee pads to protect high wear knee area Elastic gators Drysuit bag included Sizes: XS, SM, MD, ML, LG, XL, XXL, XXXL // AUG 100 (left) + AUG 200 (right) When looking for warmth during dry suit diving look no further than the AUG series of undergarments. The AUG 100 with 100 gram of technical fleece inner lining is a flexible, comfortable, and feature rich undergarment ideally suited for moderately cold dives. The AUG 200 combines all the features of the AUG 100 combined with 200 gram of Thinsulate and technical fleece lining to provide warmth in the coldest of diving conditions. Nylon shell allows for easy glide drysuit entry and acts as a windbreaker Neoprene ankle and wrist to prevent bunching while donning a drysuit and to create a wetness barrier from a possible wrist seal leak Machine washable for ease of cleaning Lined side pockets to keep hands warm on cold surface intervals Neoprene stretch panel in crotch to allow for more freedom of leg movement Soft and close-cut neck for comfort and to avoid neck seal interference Vents on arms to prevent air restrictions while trying to vent a drysuit Zippered left chest pocket Sizes: XS, SM, MD, ML, LG, XL, XXL, XXXL

11 18 comparison charts comparison charts 19 // regulators // 1st stages FEATURES & FUNCTIONS H-O Octo 410 Valve Type DEMAND DEMAND DEMAND DEMAND DEMAND FEATURES & FUNCTIONS DC-1 DC-2 DC-3 H-O2 Type Over-Balanced Diaphragm Over-Balanced Diaphragm Over-Balanced Diaphragm Unbalanced Piston Patented Dynamic Adjustment Automatically Maintains Inhalation Effort Throughout The Dive Ergonomic A.V.S. (Adjustable Venturi System) Dive/Pre-Dive Switch YES NO NO NO NO YES YES NO YES NO Primary Material Marine Brass Forged Marine Brass Marine Brass Marine Brass Low Pressure Ports Pneumatically Balaned System YES YES YES Integrated Purge Button YES YES YES YES YES High Pressure Ports Swivel Turret YES NO NO NO Patented Orthodontic Mouthpeice With High-Density Bite Tabs YES YES YES YES YES Nitrox Compatible Standard to 40% Standard to 40% Standard to 40% Standard to 100% Nitrox Compatible Standard to 40% Standard to 40% Standard to 100% Standard to 40% Standard to 40% Weight (W/O Hose) 6.7oz /.19kg 5.7oz /.16kg 6.0oz /.17kg 5.7oz /.16kg 7.9oz /.22kg Dimensions (Front Profile) 2.65in / 6.73cm 2.65in / 6.73cm 2.78in / 7.06 cm 2.65in / 6.73cm 3.9in / 9.90 cm First Stage Configuration DC-1/DC-2/DC-3 DC-3 H-O2 N/A N/A Minimum Cracking Effort DIVER ADJUSTABLE Factory Set Inhalation Effort CIW CIW CIW CIW Work Of Breathing (198ft / 60m).86 Joules 1.1 Joules 1.23 Joules 1.1 Joules 2.86 Joules Warranty 2 YEAR 2 YEAR 2 YEAR 2 YEAR 2 YEAR Limited Lifetime Service Agreement YES YES YES YES YES 300 Bar Din Fitting Optional Optional Optional Standard Sealed Valve Design YES YES YES NO Coldwater / Environmental Seal Protection YES YES YES NO Weight 2.18lb /.99kg 2.02lb /.91kg 1.92lb /.87kg.52lb / 1.14kg Factory Set Intermediate Pressure psi ( bar) psi ( bar) psi ( bar) psi ( bar) Pressure Drop 20 psi (1.38 bar) 9 psi (.6 bar) 20 psi (1.38 bar) 13 psi (.89 bar) Warranty 2 YEAR 2 YEAR 2 YEAR 2 YEAR Limited Lifetime Service Agreement YES YES YES YES CE Approved YES YES YES YES

12 20 comparison charts comparison charts 21 // buoyancy FEATURES & FUNCTIONS HD-100 BCD ATS BCD S-25 Wing S-38 Wing X-37 Wing X-55 Wing FEATURES & FUNCTIONS BAC-65 Wing BAC-85 Wing BAC-85 DUAL Wing SOLO Harness SWITCHBACK Harness HTS Harness ELITE Harness Material 1600 denier nylon outer shell 1600 denier nylon outer shell Material Nylon Webbing Nylon Webbing Nylon Webbing / Nylon Webbing / Lift Capacity SM/MD - 35lbs / 15.4kg LG/XL - 38lbs / 17.2kg SM/MD - 37lbs / 16.8kg LG/XL - 47lbs / 21.3kg 25lbs / 11.3kg 38lbs / 17.2kg 37lbs / 16.8kg 55lbs / 24.9kg Lift Capacity 65lbs / 29.5kg 85lbs / 38.5kg 85lbs / 38.5kg N/A N/A N/A N/A Internal Bladder 15mm urethane 15mm urethane 420 denier nylon PU coated 420 denier nylon PU coated 15mm urethane 15mm urethane Max Dumpable Integrated Weight 20lb / 9kg 20lb / 9kg N/A N/A N/A N/A Max Non-Dumpable Rear Weight Pockets Two 5lb / 2.27kg OPTIONAL N/A N/A N/A N/A Padded Backpack YES YES N/A N/A N/A N/A Stainless Steel D-Rings YES YES N/A N/A N/A N/A Crotch Strap OPTIONAL YES N/A N/A N/A N/A Cam Band Slots NO NO YES YES YES YES Single Tank/Doubles Tank/Both SINGLE SINGLE SINGLE SINGLE BOTH BOTH Sizes SM, MD, LG, XL SM, MD, LG, XL One size fits all One size fits all One size fits all One size fits all Internal Bladder 15mm urethane 15mm urethane 15mm urethane N/A N/A N/A N/A Max Dumpable Integrated Weight N/A N/A N/A OPTIONAL 20lb / 9kg OPTIONAL 20lb / 9kg OPTIONAL 20lb / 9kg OPTIONAL 20lb / 9kg Max Non-Dumpable Rear Weight Pockets N/A N/A N/A OPTIONAL OPTIONAL OPTIONAL OPTIONAL Padded Backpack N/A N/A N/A OPTIONAL OPTIONAL YES OPTIONAL Stainless Steel D-Rings N/A N/A N/A YES YES YES YES Crotch Strap N/A N/A N/A YES YES YES YES Cam Band Slots YES YES YES YES YES YES YES Single Tank/Doubles Tank/Both BOTH BOTH BOTH BOTH BOTH BOTH BOTH Sizes One size fits all One size fits all One size fits all One size fits all One size fits all SM, MD, LG, XL XS/SM, MD/ LG, XL/XXL

13 ISO 9001:2000 is a distinguished global standard of quality management systems, not only in design and manufacturing, but virtually all aspects of company operations. Hollis and its family of companies are committed to exceeding the requirements for ISO 9001:2000 certification Davis Street San Leandro, CA In European markets, certain product categories are required to pass rigorous testing standards. All Hollis products that require testing have surpassed the CE standards DIVE //