The default setting has been changed to be Direct Thermal on the Zebra 2746 and 2746e printers.

Transcription

1 Changes from v3.97 to v3.98 Added support for the new Zebra TLP2824 printer model. Added USB support for the new Zebra TLP/LP2824 printer model. Added support for the new Zebra 2746e printer model. The default setting has been changed to be Direct Thermal on the Zebra 2746 and 2746e printers. 7/31/2002 Changes from v3.96 to v3.97 Due to re-branding of Eltron Label printers, the following printer names have been added to support the Zebra brand name: Zebra Branded Printers Zebra LP2824 Zebra LP2844 Zebra LP2443 Zebra LP2684 Zebra TLP2684 Equivalent Eltron Branded Printers Eltron LP2824 Eltron LP2844* Eltron Orion Eltron Strata - DT Mode Eltron Strata - TT Mode Zebra 2746 Eltron 2746 Zebra Ht-146 Zebra LP2722 Zebra LP2742 Zebra TLP2722 Zebra TLP2742 Zebra TLP2844 Zebra TLP3742 Eltron Ht-146 Eltron LP2722 Eltron LP2742 Eltron TLP2722 Eltron TLP2742 Eltron TLP2844* Eltron TLP3742 The above Zebra printer drivers added in this version are identical to their Eltron counterparts in functionality. * Eltron LP 2844 and Eltron TLP 2844 printers will not be released. Only the Zebra LP 2844 and Zebra TLP 2844 printers will be released at this time. Changes made to the Oemsetup.inf file: Added the file location information under the SourceDisksFiles section, for usbmon.dll file to eliminate an error message appearing during driver installation using Windows 95, Windows 98 and Windows 98 SE Is [SourceDisksFiles] Was [SourceDisksFiles]

2 USBMON.DLL =1,"WIN9X" Eltron LP 2844 and Eltron TLP 2844 printers are not listed in the oemsetup.inf file. Changes from Vx.95 to V3.96 This is a major upgrade to the Windows Drivers. This version supports the following Operating Systems: Windows 95 Windows 98 Windows Me, Windows NT4.0 Windows 2000 Windows 3.XX is no longer supported. The Printer Driver now uses a single OEMSETUP.INF file, which automatically installs the correct Windows Driver for the Operating System. This version of the Windows Driver has USB support for the following Operating Systems: Windows 98; Windows Me and Windows 2000 Windows NT has no USB support Known issues: WinNT4.0 and Win2000 Operating Systems: The printer Driver will default to #9 envelope paper size. This must be changed to the correct paper size; otherwise you will only see a narrow strip of print in the center of the label. To change the default paper size, use document defaults, which can be accessed by right clicking on the printer icon. Functionality Changes: All Printers - Density setting has moved from Print Quality to Print Density. See specifics listed below: Windows 95/98/Millenium This option can now be found on the Device Options Tab Windows NT4.0 and Windows 2000 This option can still be found under Document Defaults, but under Print Density All Printers - Cutter Enable/Disable selection has moved from Paper Source to Output. See specifics listed below: Windows 95/98/Millenium This option can now be found on the Paper Tab, under More Options Windows NT4.0 and Windows 2000 This selection can still be found under Document Defaults, but under Paper/Output V3.96 supports the following printer models:

3 "Eltron Companion Series" "Eltron LP2824" "Eltron LP2844" "Eltron Orion" "Eltron Strata" "Eltron 2746" "Eltron Ht-146" "Eltron LP2722" "Eltron LP2742" "Eltron TLP2722" "Eltron TLP2742" "Eltron TLP2844" "Eltron TLP3742" Direct Thermal Mode can be selected when using an Eltron 2746 Author: Ildiko Szegedi Date: 12/01/2000 Changes from Vx.91 to Vx.95 Supports the following Operating Systems: Windows 3.XX Windows 95/98 Windows NT3.51 and NT4.0 Vx.95 supports only the following legacy printers: "Eltron TigerWriter 2" "Eltron TigerWriter 4" "Eltron LP2022" "Eltron LP2042" "Eltron LP2122" "Eltron LP2142" "Eltron P2222" "Eltron P2242" "Eltron Orion" "Eltron Eclipse-Direct Thermal" "Eltron Eclipse-Thermal Transfer" "Eltron TLP2044" "Eltron TLP2046" "Eltron LP2242" "Eltron LP2622/2722" "Eltron LP2642/2742" "Eltron LP3642" "Eltron TLP2242" "Eltron TLP2622/2722" "Eltron TLP2642/2742" "Eltron TLP3642/3742" "Eltron Strata-Direct Thermal" "Eltron Strata-Thermal Transfer" "Eltron QB440-Direct Thermal" "Eltron QB440-Thermal Transfer" "Eltron QB450-Direct Thermal" "Eltron QB450-Thermal Transfer"

4 "Eltron QB485-Direct Thermal" "Eltron QB485-Thermal Transfer" "Eltron 2442" "Eltron 2543" Date : 11/09/2000 Author: Ildy Szegedi Changes from Vx.90 to Vx.91 Added new printer models: Eltron LP2824 Known Issues: LP2042 and LP2022 when TOF Backup is enabled the first label in a batch prints correctly, but all following labels print offset down. Date : 01/10/2000 Changes from Vx.89 to Vx.90 Added new printer models: Eltron 2746 Corrected bug in User Defined label size, the q value was not being sent. This applies to the following operating systems: Windows 95/98 Windows NT 3.51 Windows NT 4.0 Note: Windows 3.1 does not allow for the small q value, due to a bug in the UNIDRV.DLL file supplied by Microsoft. Date : 11/12/99 Changes from Vx.88 to Vx.89 Added the following new printer models: LP/TLP2722 LP/TLP2742 TLP3742 Corrected bug in Print Speed selection for all printers supporting 1IPS print speed Added P2242 and Xport for compatibility with CAL3. These are dummy drivers and do not do anything.

5 Known Issues: LP2042 and LP2022 when TOF Backup is enabled the first label in a batch prints correctly, but all following labels print offset down. Date : 2/10/99