Lenel Access Hardware Demo System User Guide
|
|
|
- George Summers
- 6 years ago
- Views:
Transcription
1 Lenel Access Hardware Demo System User Guide PERPETUAL INNOVATION
2 Lenel OnGuard 2012 Lenel Access Hardware Demo System User Guide, product version 6.5. This guide is item number DOC-971, revision 2.002, November 2011 Copyright Lenel Systems International, Inc. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Lenel Systems International, Inc. Non-English versions of Lenel documents are offered as a service to our global audiences. We have attempted to provide an accurate translation of the text, but the official text is the English text, and any differences in the translation are not binding and have no legal effect. The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that agreement. Lenel and OnGuard are registered trademarks of Lenel Systems International, Inc. Microsoft, Windows, Windows Server, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Integral and FlashPoint are trademarks of Integral Technologies, Inc. Crystal Reports for Windows is a trademark of Crystal Computer Services, Inc. Oracle is a registered trademark of Oracle Corporation. Other product names mentioned in this User Guide may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Portions of this product were created using LEADTOOLS LEAD Technologies, Inc. ALL RIGHTS RESERVED. OnGuard includes ImageStream Graphic Filters. Copyright Inso Corporation. All rights reserved. ImageStream Graphic Filters and ImageStream are registered trademarks of Inso Corporation.
3 Table of Contents CHAPTER 1 Introduction CHAPTER 2 Hardware Intelligent System Controller (ISC) LNL Single Reader Interface Module LNL-1300 Series XCeedID (LNL-XF-1050-B) OpenProx Multiclass Reader HID ( ) MIFARE Sector Reader HID (RWKL550) OSDP LCD iclass Reader CHAPTER 3 Configuration LNL-2220 Configuration LAN Connection (Default Connection) LNL-1300 Single Reader Interface Configuration (Port 2) LNL-1300 Settings General Tab LNL-2220 IDRC Onboard Reader 1 Configuration (Port 3) General Tab LNL-2220 IDRC Onboard Reader 2 Configuration (Port 3) General Tab LNL-2220 IDRC Reader Interface Inputs LNL-2220 IDRC Reader Interface Outputs Local I/O Setup for Auxiliary Inputs and Outputs Card Formats Groups Enabling User Commands/Extended Hold Options Lenel Access Hardware Demo System User Guide 3
4 Table of Contents Command Keypad Templates Command Programming Assignment (HID OSDP Reader) APPENDIX A Configuration Overview ISC Communication Parameters ISC Setup Parameters Single Reader Interface AUX Output Dual Reader Interface Reader AUX Input AUX Output AUX Input Reader AUX Input AUX Output AUX Input APPENDIX B Demonstration Scenarios Valid User Presents Card to Reader User Presents Invalid Badge to Reader Valid User Arms the System APPENDIX C Wiring Diagram Lenel Access Hardware Demo System User Guide
5 CHAPTER 1 Introduction The Lenel Access Hardware Demo System (refered to throughout this guide as Demo Case ) includes the following hardware: ISC LNL-2220 SRI LNL-1300 XCeedID (LNL-XF-1050-B) OpenProx Multiclass Reader HID ( ) Mifare Sector Reader HID (RWKL550) OSDP LCD iclass Reader Three inputs Three outputs Output reset button Amber LED power indicator Three door contacts with tipped LED RS-485 asset reader connection 6-foot retractable CAT 5e crossover cable Lenel Access Hardware Demo System User Guide 5
6 Introduction LenelProx w/magstripe Sample Card HID 2k/2 application area iclass sample card Mifare Sample Card 12 VDC universal power supply Soft-sided carrying case In addition, a laptop PC is required to run OnGuard software that was installed with the Demo Case database. For a description of the hardware installed in the Demo Case, refer to Chapter 2: Hardware on page 7. For a description of the Lenel hardware and OnGuard database configuration for the Demo Case, refer to Chapter 3: Configuration on page 11. For a reference table overview of the OnGuard Demo Case database configuration, refer to Appendix A: Configuration Overview on page 33. For a description of scenarios you can use to demonstrate the Lenel access hardware and OnGuard software, refer to Appendix B: Demonstration Scenarios on page 41. For a Demo Case wiring interconnect diagram, refer to Appendix C: Wiring Diagram on page Lenel Access Hardware Demo System User Guide
7 CHAPTER 2 Hardware This chapter describes the hardware included in the Lenel Access Hardware Demo System. For wiring interconnections, refer to Wiring Diagram on page 43. Intelligent System Controller (ISC) LNL-2220 The LNL-2220 Intelligent System Controller (IDRC) by Lenel provides a single board solution for interfacing one or two doors to an OnGuard system. In addition, other I/O and reader interface modules can be added on the LNL-2220's downstream port to expand its capabilities. The LNL-2220 revolutionizes access control system architecture by allowing Ethernet connection directly from an entry location to the OnGuard server, while still providing the security, functionality, and modularity of Lenel's proven access series hardware platform. The LNL-2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the LNL-2220 allows nearly all local functionality to continue unimpaired until the server connection is restored. Utilizing its native Ethernet communications and an advanced 32-bit processor, the LNL-2220 can communicate upstream to the host computer through its Ethernet port (with a throughput up to eight times greater than the fastest serial connections) or at up to 115.2Kbps using RS-232 communication directly or through an external dial-up modem. The LNL-2220 can store up to 250,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The downstream RS-485 two-wire port can be used to connect up to 32 devices (maximum 64 doors). Two on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS-485 readers and the bidirectional RS-485 Open Supervised Device Protocol (OSDP) communications. Each LNL-2220 supports up to eight different card formats. The LNL-2220 includes eight inputs that support normally open, normally closed, supervised and unsupervised circuits. In addition, four output relays support fail-safe or fail-secure operation. Lenel Access Hardware Demo System User Guide 7
8 Hardware Single Reader Interface Module LNL-1300 Series 2 Lenel Systems International offers a Single Reader Interface (SRI) module for access control solutions. Access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported, as are those that support the new bidirectional RS-485 Lenel OnGuard Supervised Device Protocol (OSDP). Lock, unlock, and facility code offline access modes are supported on all readers connected to the SRI. Each DRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats. The SRI provides a vital link between the Intelligent System Controller (ISC) and the card reader attached to the interface. As many as 32 SRI modules can be multi-dropped using RS wire communication up to 4,000 feet per port away from the ISC. Each SRI module is individually addressed for increased reporting capabilities with OnGuard access control software applications. The SRI includes two inputs that support normally open, normally closed, supervised, and nonsupervised circuits. Two output relays support fail-safe or fail-secure operation. XCeedID (LNL-XF-1050-B) OpenProx Multiclass Reader The Lenel OpenProx Reader supports all major 125 khz card standards. The Lenel OpenProx Reader provides compatibility with HID proximity, GE/CASI ProxLite, XceedID proximity, AWID, and LenelProx card formats. Lenel provides a single compact reader that can integrate diverse proximity card populations, or allow seamless transition from one 125 khz technology to another. The mullion reader is perfect for narrow-rail mullion installations. It can be used as a sleek and unobtrusive unit, as well as in standard wall-mounted reader applications. HID ( ) MIFARE Sector Reader The HID MIFARE Sector Reader is a flexible, highly secure and stylish contactless smart card reader ideal for customers that require a customizable reader for new or existing installations. The reader is designed for a wide variety of applications from entry-level access control to secure ID management. The reader s keypad adds an extra layer of protection for higher security installations. HID (RWKL550) OSDP LCD iclass Reader Using MHz contactless smart card technology, the HID OSDP LCD iclass Reader provides users with new options for supporting multi-factor identity authentication. Combine a contactless card presentation with a personal identification number (PIN) to securely control access to high security areas. Turn the reader into a remotely controlled device, enabling a host to read and write data on an iclass card in addition to controlling the LCD to display time, badgeholder information, and so on. Versatile communication interfaces allow any host to connect to and communicate with the reader. Local operation mode (access control) allows the reader to interface with the highly secure iclass access control application, sending card data one-way to a host over a Wiegand, RS232 or RS485 (point-to-point) physical link while displaying canned messages to the user (multi-language support configurable). Use remote operation mode (pass-through) to open up two-way communications over 8 Lenel Access Hardware Demo System User Guide
9 HID (RWKL550) OSDP LCD iclass Reader RS232, RS485 (point-to-point) or USB interfaces. Read and write unique application data on iclass cards while controlling the LCD, beeper and LEDs. Lenel Access Hardware Demo System User Guide 9
10 Hardware 10 Lenel Access Hardware Demo System User Guide
11 CHAPTER 3 Configuration This chapter describes the hardware and software configuration of the Lenel Access Hardware Demo System. LNL-2220 Configuration LAN Connection (Default Connection) The Lenel Access Demo System has a network cable cutout on the top of the unit where the cable will connect directly into the LNL By default, all dipswitches are set to OFF and the factory default IP address is set to , Address 0. To assign a different parameters to the ISC, refer to the OnGuard Hardware Installation documentation. LNL-2220 Settings Parameter Setting Address 0 Baud rate RAM PIN 38.4 kbps 16 MB 1 to 4 digits Lenel Access Hardware Demo System User Guide 11
12 Configuration LNL-2220 Tab System Administration > Access Control > Access Panels Connection Tab Options Tab 12 Lenel Access Hardware Demo System User Guide
13 LNL-1300 Single Reader Interface Configuration (Port 2) LNL-1300 Single Reader Interface Configuration (Port 2) System Administration > Access Control > Readers and Doors LNL-1300 Settings Parameter Setting Address 31 Baud rate Input power Communication interface 38.4 kbps 12 Vdc unregulated RS wire General Tab Parameter Name Setting 1-HID OSDP Reader Port 2 Address 31 Reader number 0 Lenel Access Hardware Demo System User Guide 13
14 Configuration Settings Tab Controls Tab 14 Lenel Access Hardware Demo System User Guide
15 LNL-1300 Single Reader Interface Configuration (Port 2) LNL-1300 Outputs SRI Output Address RLY 1 RLY 2 Setting Door Strike HID OSDP Reader Armed Aux Outputs Tab. Parameter Output 1 Name Setting Armed Output 1 Pulse Time (sec) 5 Lenel Access Hardware Demo System User Guide 15
16 Configuration LNL-2220 IDRC Onboard Reader 1 Configuration (Port 3) System Administration > Access Control > Readers and Doors General Tab Parameter Name Setting 3-MIFARE Reader w/pinpad Address 0 Reader number 0 Settings Tab 16 Lenel Access Hardware Demo System User Guide
17 LNL-2220 IDRC Onboard Reader 1 Configuration (Port 3) Controls Tab Lenel Access Hardware Demo System User Guide 17
18 Configuration LNL-2220 IDRC Onboard Reader 2 Configuration (Port 3) System Administration > Access Control > Readers and Doors General Tab Parameter Name Setting 2-Lenel OpenProx Address 0 Reader number 1 Settings Tab 18 Lenel Access Hardware Demo System User Guide
19 LNL-2220 IDRC Onboard Reader 2 Configuration (Port 3) Controls Tab Lenel Access Hardware Demo System User Guide 19
20 Configuration LNL-2220 IDRC Reader Interface Inputs System Administration > Access Control > Readers and Doors IDRC Input Address IN 1 Description Non-supervised - Door 1 Contact MIFARE Reader w/pinpad IN 2 Non-supervised - Door 1 REX MIFARE Reader w/ PINPad IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 Non-supervised - Door 1 Aux 1 - Door Non-supervised - Door 1 Aux 2 - Window Non-supervised - Door 2 Contact - Lenel OpenProx Non-supervised - Door 2 REX - Lenel OpenProx Non-supervised - Door 2 Aux 1 - Motion Non-supervised - Door 2 Aux 2 - Reset Aux Inputs Tab for MIFARE Reader w/pinpad (IN 3 and IN 4) Aux Inputs Tab for Lenel OpenProx (IN 6 and IN 7) 20 Lenel Access Hardware Demo System User Guide
21 LNL-2220 IDRC Reader Interface Outputs LNL-2220 IDRC Reader Interface Outputs System Administration > Access Control > Readers and Doors DRI Output Address OUT 1 Description Non-supervised - Door 1 Contact MIFARE Reader w/pinpad OUT 2 Non-supervised - Door 1 REX MIFARE Reader w/ PINPad OUT 3 OUT 4 Non-supervised - Door 2 Contact - Lenel OpenProx Non-supervised - Door 2 REX - Lenel OpenProx Aux Outputs Tab for MIFARE Reader w/pinpad (OUT 2) Aux Outputs Tab for Lenel OpenProx (OUT 4) Lenel Access Hardware Demo System User Guide 21
22 Configuration Local I/O Setup for Auxiliary Inputs and Outputs System Administration > Access Control > Local I/O Local I/O Function List Tab Device > Function Links Tab 22 Lenel Access Hardware Demo System User Guide
23 Card Formats Card Formats System Administration > Administration > Card Formats Card Format Tab for OpenProx Format (36-Bit), All Readers Card Format Tab for FASC-N (200-Bit) HID OSDP and MIFARE Reader with PINPad Lenel Access Hardware Demo System User Guide 23
24 Configuration Card Format Tab for FASC-N (75-Bit) HID OSDP Reader and MIFARE Reader with PINPad Card Format Tab for Lenel OpenCard Format (36-Bit), All Readers 24 Lenel Access Hardware Demo System User Guide
25 Card Formats Card Format Tab for Magnetic Format, Not Assigned Card Format Tab for SEWIG (Access Control), Not Assigned Lenel Access Hardware Demo System User Guide 25
26 Configuration Custom Encoding Tab for SEWIG (Access Control), Not Assigned Card Format Tab for SEWIG GSC (Encoding), Not Assigned 26 Lenel Access Hardware Demo System User Guide
27 Card Formats Custom Encoding Tab for SEWIG GSC (Encoding), Not Assigned Card Format Tab for OSDP Format (26-Bit), All Readers Lenel Access Hardware Demo System User Guide 27
28 Configuration Groups System Administration > Access Control > Groups Mask Groups Tab 28 Lenel Access Hardware Demo System User Guide
29 Enabling User Commands/Extended Hold Options Enabling User Commands/Extended Hold Options System Administration > Administration > System Options User Commands Tab Command Keypad Templates System Administration > Access Control > Command Keypad Templates Macro Assignments Tab Lenel Access Hardware Demo System User Guide 29
30 Configuration User Feedback Tab Default Mask Group Intusion Commands Tab 30 Lenel Access Hardware Demo System User Guide
31 Command Keypad Templates Any Mask Group Intrusion Commands Tab Lenel Access Hardware Demo System User Guide 31
32 Configuration Command Programming Assignment (HID OSDP Reader) System Administration > Access Control > Readers and Doors Command Programming Tab 32 Lenel Access Hardware Demo System User Guide
33 APPENDIX A Configuration Overview This appendix provides the Lenel Access Hardware Demo Case configuration parameter settings. Lenel Access Hardware Demo System User Guide 33
34 Configuration Overview ISC Communication Parameters Parameter Workstation Setting <your workstation name> IP address Baud rate Memory Connection type 16 MB LAN Panel Address 0 Online YES ISC Setup Parameters Parameter Setting Number of cardholders 500 Options Store activate date Store deactivate date PIN Type Store anti-passback location None YES YES 1-4 digit PIN NO Single Reader Interface Parameter Reader name Type Setting HID OSDP Reader Single interface (OSDP Protocol) Port 2 Address 31 Reader number 0 Online mode Offline mode Allow user commands Pin or card Pin or card YES 34 Lenel Access Hardware Demo System User Guide
35 Single Reader Interface Parameter Allow intrusion commands Setting YES Held open time (sec) 20 Extended open (sec) 75 Strike time (sec) 10 Extended strike (sec) 25 Elevator reader Card formats Pin format NO AWID Format, FASC-N 200 Bit, FASC-N 75 Bit, Lenel Corporate Format, Wiegand Format (26-Bit) Eight bit output keypads Lenel Access Hardware Demo System User Guide 35
36 Configuration Overview AUX Output 1 Parameter Name Pulse time Activate during time zone Setting Armed 5 seconds None Dual Reader Interface Reader 1 Parameter Reader name Type Setting MIFARE Reader w/pinpad IDRC Onboard Reader 1 (Mag w/ Wiegand Output) Port Address 0 Reader number 0 Online mode Offline mode Allow user commands Allow intrusion commands Pin or card Pin or card YES YES Held open time (sec) 20 Extended open (sec) 75 Strike time (sec) 10 Extended strike (sec) 25 Elevator reader Card formats Pin format NO AWID Format, FASC-N 200 Bit, FASC-N 75 Bit, Lenel Corporate Format, Wiegand Format (26-Bit) Eight bit output keypads 36 Lenel Access Hardware Demo System User Guide
37 Dual Reader Interface AUX Input 1 Parameter Name Input 1 Setting MIFARE Reader w/ PINPad Door Input ID 1 Contact normally open Online Always mask Mask during time zone YES YES NO None Entry delay 10 Exit delay 10 Non-latch entry NO NOT SUPERVISED AUX Output 1 Parameter Name Pulse time Activate during time zone Setting Door 5 seconds None AUX Input 2 Parameter Name Input 2 Setting MIFARE Reader w/ PINPad Window Input ID 2 Contact normally open Online Always mask Mask during time zone YES YES NO None Entry delay 0 Exit delay 0 Lenel Access Hardware Demo System User Guide 37
38 Configuration Overview Parameter Non-latch entry Setting NO NOT SUPERVISED Reader 2 Parameter Reader name Type Setting Lenel OpenProx IDRC Onboard Reader 2 (Wiegand/Prox) Port Address 0 Reader number 1 Online mode Offline mode Allow user commands Allow intrusion commands Card only Card only NO NO Held open time (sec) 20 Extended open (sec) 75 Strike time (sec) 10 Extended strike (sec) 25 Elevator reader Card formats Pin format NO AWID Format, Lenel Corporate Format, Wiegand Format (26-Bit) No keypad 38 Lenel Access Hardware Demo System User Guide
39 Dual Reader Interface AUX Input 1 Parameter Name Input 3 Setting Lenel OpenProx Motion Input ID 3 Contact normally open Online Always mask Mask during time zone YES YES NO None Entry delay 0 Exit delay 0 Non-latch entry NO NOT SUPERVISED AUX Output 1 Parameter Name Pulse time Activate during time zone Setting Alarm 5 seconds None AUX Input 2 Parameter Name Input 4 Setting Lenel OpenProx Reset Input ID 4 Contact normally open Online Always mask Mask during time zone YES YES NO None Entry delay 0 Exit delay 0 Lenel Access Hardware Demo System User Guide 39
40 Configuration Overview Parameter Non-latch entry Setting NO NOT SUPERVISED 40 Lenel Access Hardware Demo System User Guide
41 APPENDIX B Demonstration Scenarios Valid User Presents Card to Reader Switch tip will light up green depicting a door strike. User toggles the corresponding door switch to trigger a simulated contact break in a typical door open/close scenario. User Presents Invalid Badge to Reader Door LED tipped toggle switch will not light up. When presented to the HID OSDP reader, user will see "Access Denied" on the LCD screen. Valid User Arms the System Armed LED will illuminate. At this point, a motion, window or door switch under the left wing will illuminate an Alarm LED. Note: IN1 (Door) has an entry and exit delay of 10 sec. Any user can use the F3 key on the HID OSDP reader to view faulted zones. Any user with valid access can use the F4 key on the HID OSDP reader to enable extended hold on Door1. When the system is armed and an output(s) is activated, the Reset button (IN4) will deactivate all of the outputs except the Armed output. By default, upon power up, the system is in an Armed state. Lenel Access Hardware Demo System User Guide 41
42 Demonstration Scenarios 42 Lenel Access Hardware Demo System User Guide
43 APPENDIX C Wiring Diagram Refer to the Figure 1 on page 44 if you need to remove and replace the Demo Case modules. Lenel Access Hardware Demo System User Guide 43
44 Wiring Diagram FIGURE 1. Demo Case Wiring Diagram 44 Lenel Access Hardware Demo System User Guide
45 Lenel Access Hardware Demo System User Guide 45
46 Lenel Systems International, Inc Pittsford-Victor Road Pittsford, New York USA Tel Fax
System Management Console User Guide
2013 System Management Console User Guide PERPETUAL INNOVATION Lenel OnGuard 2013 System Management Console User Guide, product version 6.6 This guide is item number DOC-520, revision 3.002, July 2012
EMBEDDED ACCESS CONTROL Hardware Installation Guide
EMBEDDED ACCESS CONTROL Hardware Installation Guide Lenel goentry Hardware Installation Guide, product version 1.00. This guide is item number DOC- ENHW-ENU, revision 1.003, April 2009 Copyright 2009 Lenel
CKM-EP2500, CKM-EP1501, and CKM-EP1502 Mercury Network Controllers
Johnson Controls, Inc. now offers Mercury Security Corporation s high-quality access control hardware products, which can be integrated with the Johnson Controls P2000 Security Management System (SMS)
Basic Import Utility User Guide
2013 Basic Import Utility User Guide PERPETUAL INNOVATION Lenel OnGuard 2013 Basic Import Utility User Guide, product version 6.6 This guide is item number DOC-101, revision 3.003, July 2012 Copyright
Device Discovery Console User Guide
2013 Device Discovery Console User Guide PERPETUAL INNOVATION Lenel OnGuard 2013 Device Discovery Console User Guide, product version 6.6. This guide is item number DOC-410, revision 3.003, July 2012 Copyright
The Access Engine. Building Integration System - The Access Engine. Security Systems
The Access Engine 1 What is BIS Access Engine? It is one of the central software modules of the Building Integration System It s a fully integrated access control solution with corresponding access hardware
Allegion AD-300 Installation Application Note. 1.0 Hardware Requirements. 2.0 Software/Licensing Requirements
Allegion Schlage AD-300 networked, hardwired locks can be integrated seamlessly with the Doors.NET software when used with the NXT-MSC (Mercury-Powered controllers). You can connect and communicate with
INTELLIGENT CONTROL MODULE SA-2000-II HARDWARE MANUAL. Access Technologies International, Inc.
SA-2000-II HARDWARE MANUAL Access Technologies International, Inc. 1 Table of Contents 1. Introduction 3 2. Features 3 3. Specification 4 4. Identifying Supplied Parts 4 5. Panel Description 5 6. Connection
Doc 10. UTM Standards: Card Access Security System
Doc 10 UTM Standards: Card Access Security System 1. GENERAL... 2 1.1. GENERAL REQUIREMENTS.... 2 1.2. SUMMARY OF WORK INCLUDED... 2 1.3. OVERVIEW... 2 1.4. MANDATORY REQUIREMENTS... 3 1.5. ACCESS CONTROL
Functional Specification Document
Functional Specification Document Access Control Technology Unit C1 South City Business Centre Tallaght Dublin 24 Ireland Ph: + 353 (0) 1 4662570 Web: www.accesscontrol.ie Index Introduction 1.1 Hardware
Access Professional Edition Selection Guide
Access Professional Edition Selection Guide 2 Contents Contents 3 System overview 3 Wiegand based hardware 4 RS485 Bus reader 5 Selection Guide The Seven Steps to your Access System 6 Step 1: Choose Base
Overview. Alarm console supports simultaneous viewing of both live and recorded video when alarm events are selected
Niagara Security Overview Niagara Security by Tridium, is an open, web-based security management solution that allows you to manage and monitor your facility anytime, anywhere. Built on Tridium s Niagara
SYMMETRY PRODUCT OVERVIEW
ACCESS CONTROL The Symmetry Security Management Systems provides powerful integrated solutions for organizations requiring Access Control and Integrated Security. Solutions are available for organizations
SYMMETRY. DATASHEET ACCESS CONTROL Product Overview
DATASHEET ACCESS CONTROL Product Overview SYMMETRY The AMAG Technology range of Security Management Systems provides powerful integrated solutions for organizations requiring Access Control and Integrated
ACCESS CONTROL SYSTEM
ACCESS CONTROL SYSTEM Flexible, Expandable, Economical. The i-pass system comprises of the i-pass controller built with state of the art technology to provide reader access for up to 16 doors and 32 elevator
Versatility, reliability and expandability are the three main features that make the N-1000 one of the most popular access control panels ever.
Versatility, reliability and expandability are the three main features that make the N-1000 one of the most popular access control panels ever. Expandability is the most important feature of any access
VARIO PROX CARD READER INSTALLATION MANUAL
VARIO PROX CARD READER INSTALLATION MANUAL TABLE OF CONTENTS 1.0 INTRODUCTION...2 1.1 Legend...3 1.2 Terminology...4 2.0 MOUNTING...5 3.0 WIEGAND CONNECTION...6 4.0 AUX BUTTON INPUT...7 5.0 INSTALLER PROGRAMMING...8
Controller 5000GL Controller 5000GL provides flexible system architecture with options of GBUS and LOCAL BUS communications to field devices, to meet a wide range of site requirements. GGBUS L LOCAL BUS
EQUIPMENT SPECIFICATIONS
EQUIPMENT SPECIFICATIONS IC-1600 Intelligent Controller The IC-1600 Intelligent Controller is a fully intelligent panel that has a complete database on board. It operates in conjunction with the Access
PRT3 Printer Module: ASCII Protocol Programming Instructions
PRT3 Printer Module: ASCII Protocol Programming Instructions We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send
AC-115 Compact Networked Single Door Controller. Installation and User Manual
AC-115 Compact Networked Single Controller Installation and User Manual December 2007 Table of Contents Table of Contents 1. Introduction...5 1.1 Key Features... 6 1.2 Technical Specifications... 7 2.
L-1 Fingerprint Reader Solutions. V-Flex 4G
L- Fingerprint Reader Solutions V-Flex 4G 4G Biometric Performance Redefined with a Flexible and Powerful Device to Secure any Size Premises Advanced Features Large Template Storage Capacity (0,000 in
Integrated Building Management and Security System. Building Automation & Security. www.coba-group.com
Integrated Building Management and Security System Building Automation & Security www.coba-group.com INTEGRATED BUILDING MANAGEMENT AND SECURITY SYSTEM INDEX 1 GENERAL... 3 1.1 SYSTEM INTEGRATION... 3
APPLICATION NOTE. The DMP Software Family DMP COMPUTER SOFTWARE PROGRAMS
APPLICATION NOTE Contents The DMP Software Family... 1 Stand-Alone Link Software... 1 Add-on Modules for Link Software... 1 System Link End-User Panel Management Software... 2 Simple Registration and Activation...
System Integration Software
System Integration Software Release Notes for Version 6.0.5 1.0 Compatibility Currently, PC9000 is compatible with the following Radionics control/communicators: D7212, D7412, D7412G D9112, D9412 and D9412G
INSTALLATION MANUAL XM3 Reader
INSTALLATION MANUAL XM3 Reader Conditions Transactions, deliveries et cetera will be according to the general terms of delivery as deposited at the Chamber of Commerce at Meppel, The Netherlands. Registration
Topaz. GE Security. Intelligent software for access control. Topaz. Features
GE Security Topaz Integrate access control, video surveillance, alarm monitoring, and photo ID badging with the Topaz Access Control System. Topaz is packaged with everything you need to get your security
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...
INSTALLATION/PROGRAMMING INSTRUCTIONS E4KP ENTRYCHECK
Security Door Controls 3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 Fax: (805) 494-8861 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION/PROGRAMMING INSTRUCTIONS E4KP
NetworX TM NX-8E Alarm Panel. Application Note. NetworX NX-8E. 1.0 The NetworX NX-8E Alarm Panel
The PXL-510 tiger controller can be connected with the NetworX 1 NX-8E Alarm panel to allow arming and disarming of the alarm system by using the alarm panel keypad, using a wireless Wiegand device, or
Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling
Electronics Ltd Presenting Power, Intelligence... with a sense of feeling By Appointment to Her Majesty The Queen Supplier of Fire Detection Equipment Kentec Electronics Ltd. Dartford Plug in slots K772
OnGuard Online User Guide
OnGuard Online User Guide T81165/Rev ER-7991-40 Jan 2005 Contents 1 Introduction Related documents 1 1 Navigation of the software 1 2 How to use this guide 1 4 2 Managing Access Holidays and Timezones
Portions of this product were created using LEADTOOLS 1991-2010 LEAD Technologies, Inc. ALL RIGHTS RESERVED.
Installation Guide Lenel OnGuard 2010 Installation Guide, product version 6.4. This guide is item number DOC-110, revision 1.045, May 2010 Copyright 1995-2010 Lenel Systems International, Inc. Information
B.A.S.I.S. G and V Offline Setup Guide
B.A.S.I.S. G and V Offline Setup Guide Copyright 2006 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document
AD-Series. Selection Guide
AD-Series Selection Guide The first step in our design process: Listening. We wanted to know exactly what you needed in a security solution. So we asked. We asked hundreds of questions and received thousands
Portions of this product were created using LEADTOOLS 1991-2009 LEAD Technologies, Inc. ALL RIGHTS RESERVED.
Installation Guide Lenel OnGuard 2009 Installation Guide, product version 6.3. This guide is item number DOC-110, revision 1.038, May 2009 Copyright 1992-2009 Lenel Systems International, Inc. Information
CONSULTANT PROCEDURES & DESIGN GUIDELINES 28 13 00 ACCESS CONTROL SYSTEM
GENERAL: To provide minimum standards for Access Control Systems. PART 1 Common Work Results for Access Control System 1.1 Owner will provide server and software for connecting control panels through the
Doors in a Network Environment
in a Network Environment 1.0 Purpose of this Document Doors is designed for use in stand-alone computer applications; no network functionality has been built into the program. However, with the prevalence
Quick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation
Quick Installation A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding This chapter intends to get your new FuzzyScan scanner working with your existing system within minutes. General instructions
Integrated Building Management and Security System. Building Automation & Security. www.lonix.com
Integrated Building Management and Security System Building Automation & Security www.lonix.com INTEGRATED BUILDING MANAGEMENT AND SECURITY SYSTEM INDEX 1 GENERAL... 3 1.1 GREEN BUILDING REQUIREMENTS...
Crow Limited Warranty. Print Version 017
Crow Limited Warranty (Crow) warrants this product to be free from defects in materials and workmanship under normal use and service for a period of one year from the last day of the week and year whose
PRT-CTRL-SE. Protege System Controller Reference Manual
PRT-CTRL-SE Protege System Controller Reference Manual The specifications and descriptions of products and services contained in this document were correct at the time of printing. Integrated Control Technology
Access Control Unit User s Guide
NetAXS Access Control Unit User s Guide The configurations described in this document have not been reviewed by Underwriters Laboratories Inc. June 2007 2007 Honeywell. All rights reserved. 800-00233,
Modbus and ION Technology
70072-0104-14 TECHNICAL 06/2009 Modbus and ION Technology Modicon Modbus is a communications protocol widely used in process control industries such as manufacturing. PowerLogic ION meters are compatible
AS-525. AxTrax Access Control Management Software. Software Manual
AS-525 AxTrax Access Control Management Software Software Manual August 2010 Table of Contents Table of Contents 1. Introduction... 5 1.1 System Features... 5 1.1.1. Access Control... 6 1.1.2. Access
Page 1 / 14 Groupe MOBILITECHMIOSBOX Technical Specification MWP-DT1010. Technical specifications
Page 1 / 14 Technical specifications Page 2 / 14 SUMMARY 1. GENERAL OVERVIEW 1.1 MIOS and the remote management 1.2 The MIOSBOX range 1.3 Synthesis of MIOSBOX s specificities 2. DETAILED PRESENTATION OF
1 Serial RS232 to Ethernet Adapter Installation Guide
Installation Guide 10/100 Mbps LED (amber color ) Link/Activity LED (green color ) 1. Introduction Thank you for purchasing this 1-port RS232 to Ethernet Adapter (hereinafter referred to as Adapter ).
Bosch ReadykeyPRO Unlimited Installation Guide, product version 6.5. This guide is item number DOC-110-2-029, revision 2.029, May 2012.
Bosch ReadykeyPRO Unlimited Installation Guide, product version 6.5. This guide is item number DOC-110-2-029, revision 2.029, May 2012. Copyright 1995-2012 Lenel Systems International, Inc. Information
EASY PROGRAMMING AND TRANSACTION ANALYSIS SOFTWARE
EASY PROGRAMMING AND TRANSACTION ANALYSIS SOFTWARE You can program online 24/7 giving you the freedom to work when and where you want. From remote bookkeeping and access, to security control on the ground
APR-PRT3 Printer Module: C-Bus Programming Instructions
APR-PRT3 Printer Module: C-Bus Programming Instructions We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send us
Ademco Vista Alarm Panel
System Galaxy Quick Guide CONFIGURATION AND OPERATION Ademco Vista Alarm Panel SG 10 APR 2011 System Galaxy Quick Guide For Ademco Vista Panel Configuration & Operation Information in this document is
Product Guide. Product Guide 2014 EMKA, Inc. Page 1 of 12
Product Guide 2014 Product Guide 2014 EMKA, Inc. Page 1 of 12 Digitus BIOMETRIC ACCESS CONTROL Secure every access point EMKA's proven manufacturing process and Digitus Biometric's Superior Engineering
Alliance System Ordering Guide
Alliance System Ordering Guide Multiple Technologies Versatile Hardware Powerful Software One family of parts and accessories Version 12-Nov-03 Alliance System Ordering Guide Table of Contents Controllers
ELM Security System Electronic Locking & Monitoring
Whitepaper ELM Security System Electronic Locking & Monitoring Issue: September 2006 EMKA Beschlagteile GmbH & Co.KG Release: 1.0 Langenberger Str. 32 42551 Velbert Germany Tel.: 0049 (0) 20 51 / 2 73-0
Cisco - Configure the 1721 Router for VLANs Using a Switch Module (WIC-4ESW)
Page 1 of 20 Configure the 1721 Router for VLANs Using a Switch Module (WIC-4ESW) Document ID: 50036 Contents Introduction Prerequisites Requirements Components Used Network Diagram The Role of Switched
BEST ACCESS SYSTEMS INTEGRATED SOLUTIONS BEST ACCESS SYSTEMS INTEGRATED SOLUTIONS
BEST ACCESS SYSTEMS INTEGRATED SOLUTIONS BEST ACCESS SYSTEMS INTEGRATED SOLUTIONS TABLE OF CONTENTS TABLE OF CONTENTS Page Software Overview...2-5 Intelligent System Controller (ISC) BAS-500 (ISC) Overview/Features...6
Keyscan Hosted Services A C e n t r a l l y M a n a g e d A c c e s s C o n t r o l S o l u t i o n
Keyscan Hosted Services A C e n t r a l l y M a n a g e d A c c e s s C o n t r o l S o l u t i o n A convenient, new way Since the launch of Keyscan s Centrally Managed Access Control (CMAC), access control
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+
Digital I/O: OUTPUT: Basic, Count, Count+, Smart+ The digital I/O option port in the 4-Series provides us with 4 optically isolated inputs and 4 optically isolated outputs. All power is supplied externally.
Access CONTROL. MANAGEMENT Software
Software Guide Access CONTROL MANAGEMENT Software 21 Personnel Fields Users are provided twenty one fields to record various personnel data such as first name, last name, department, parking spot, and
Setting up VPN Access for Remote Diagnostics Support
Setting up VPN Access for Remote Diagnostics Support D. R. Joseph, Inc. supports both dial-up and Internet access for remote support of 3GIBC1 and LF-Sizer control systems. This document describes how
Electronic Access Control Solutions
Electronic Access Control Solutions Access Control Access Control Digitus BIOMETRIC ACCESS CONTROL Secure every access point The new db (Digitus Biometric) Biolock Technology paired with our Electromechanical
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide
Hypercom Key Loading and Management (HKLM) RS232 PPP Key Injection PC Setup Guide Hypercom Corporation 8888 East Raintree Drive Scottsdale, Arizona 85260 USA Corporate Telephone: 480.642.5000 Corporate
Job Aid Pre-Installation Information S8500 Media Server
Required information Job Aid Pre-Installation Information S8500 Media Server This job aid provides the information, hardware requirements, and computer hardware and software specifications necessary for
B.A.S.I.S. Offline Setup Guide
B.A.S.I.S. Offline Setup Guide Copyright 2004 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document is
Edge Metrics Data Center User Manual
Edge Metrics Data Center User Manual Introduction EMDC is an Internet based, Facility Access Control Solution for small to medium size businesses, property management firms, schools, religious facilities,
SAGEM MA520 READERS FINGER & SMART CARD ENROLLMENT
System Galaxy Quick Guide CONFIGURATION AND OPERATION SAGEM MA520 READERS FINGER & SMART CARD ENROLLMENT SG 10.2.0 MAR 2013 Page 2 System Galaxy Biometric Guide for Sagem MA520 & MIFARE Cards Configuring
DSA-1000 / PRT-1000 Device Server / Thermal Printer
LevelOne DSA-1000 / PRT-1000 Device Server / Thermal Printer User Manual V2.0 TABLE OF CONTENTS 1. INTRODUCTION...- 3-2. DEVICE OVERVIEW...- 7-3. HARDWARE SETUP...- 10-4. SYSTEM CONFIGURATION...- 12 -,
GV-AS/EV Controller. User s Manual
GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. AS100.110.120.210.400.410.810-EV48-A
UNC500 HARDWARE MANUAL. new generation building security
UNC500 HARDWARE MANUAL new generation building security Copyright Notice Copyright 1995-2012 by All rights reserved Worldwide. Printed in Canada. This publication has been provided pursuant to an agreement
High Performance Access Control and Integrated Security Systems
High Performance Access Control and Integrated Security Systems High Performance Access Control and Integrated Security Systems EntraPass Corporate Edition is a powerful multi-user access control system
For Dealers / Integrators / Architects. IS Series. Video Intercom. Building Communication. Controlling Security.
For Dealers / Integrators / Architects IS Series Video Intercom Building Communication. Controlling Security. IS Series helps save money Control multiple functions from any location to help reduce overall
Honeywell s WIN PAK SE 2.0 / WIN PAK PE 2.0 Access Control System Guide Specifications in CSI Format SECTION 281300
SECTION 281300 INTEGRATED SECURITY MANAGEMENT SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Provide a modular and network enabled access control system for security management, including engineering, supply,
BabyWare Imperial PC Software
Overview (see page 1) Things You Should Know (see page 1) Getting Started (see page 2) Licenses and Registration (see page 6) Usernames Passwords and Login (see page 7) BabyWare Imperial PC Software Overview
NT500 Offline Getting Started Guide
NT500 Offline Getting Started Guide Copyright 2007 Stanley Security Solutions, Inc. and Stanley Logistics, Inc. All rights reserved. Printed in the United States of America. Information in this document
Application Note: Connecting to a 2500 Series Processor using PLC Workshop
Application Note: Connecting to a 2500 Series Processor using PLC Workshop This application note will describe a step by step process for the three ways to connect to a 2500-CXXX with PLC Workshop. The
EZ-View Network Communications Guide www.cszindustrial.com
Network Communications Guide EzView Network Communications Guide RevB July 2013 (V2.2) Supersedes: RevA (May 2011) Cincinnati Sub-Zero Products, LLC 513-772-8810 12011 Mosteller Road Cincinnati, Ohio 45241
Aperio Online System Description
Aperio Online Aperio Online System Description Document No: ST-002326-B, Issue date: 4 August 2015 1 The global leader in Aperio Online Mechanical Installation Guide, Document No: ST-002326-PB, Date: Online
HyperAccess Access Control System
Control System We manufacture, an advanced PC based access control solution that will give you control over who has access to your building. With you can control access on hundreds of doors for up to 10,000
TX3 Series TELEPHONE ACCESS SYSTEMS. Configurator Quick Start. Version 2.2 Mircom Copyright 2014 LT-973
TX3 Series TELEPHONE ACCESS SYSTEMS Configurator Quick Start Version 2.2 Mircom Copyright 2014 LT-973 Copyright 2014 Mircom Inc. All rights reserved. Mircom Configurator Software Guide v.2.2 for Windows
Service Manual Advantage Access Systems
Service Manual Advantage Access Systems [AAM4-A and AAM4C-A] May 1996 P/N 09830003 Revision B Advantor Corporation 6101 Lake Ellenor Drive Orlando, FL 32809 Copyright Notice and Software License Copyright
Tutorial: Configuring GOOSE in MiCOM S1 Studio 1. Requirements
Tutorial: Configuring GOOSE in MiCOM S1 Studio 1. Requirements - Two (2) MiCOM Px4x IEDs with Version 2 implementation of IEC 61850 - Two (2) Cat 5E Ethernet cable - An Ethernet switch 10/100 Mbps - MiCOM
PAC1 Door Access Controller
PAC1 Door Access Controller Series 2 IMPORTANT DIFFERENCES FROM SERIES 1 1. A PACDL data logger revision 4.0 or higher attached to the DLOG terminal is able to program all features (i.e. times, relay type,
Troubleshooting and Diagnostics
Troubleshooting and Diagnostics The troubleshooting and diagnostics guide provides instructions to assist in tracking down the source of many basic controller installation problems. If there is a problem
GV-AS Controller. Installation Guide
GV-AS Controller Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ASHV1124-A-EN 2011 GeoVision, Inc.
ACU-1000 Manual Addendum Replacement of CPM-2 with CPM-4
ACU-1000 Manual Addendum Replacement of CPM-2 with CPM-4 1 PURPOSE:... 1 2 CPM-4/CPM-2 COMPATIBILITY... 2 2.1 NETWORK CABLES... 2 2.2 FACTORY DEFAULT SETTINGS... 2 2.3 CHANGING THE RS-232 SERIAL PORT BAUD
HAI Access Control. The HAI Access Control Card Reader can be used for:
HAI Access Control HAI Access Control allows you to access doors by opening an electric or magnetic lock, arm and disarm the security system, and achieve many home automation functions such as controlling
Access control using the COM1000 and Wiegand Protocol Card Readers
Access control using the COM1000 and Wiegand Protocol Card Readers Introduction The use of modern access control systems in government and private buildings has become commonplace. These systems enable
Emerson Smart Firewall
DeltaV TM Distributed Control System Product Data Sheet Emerson Smart Firewall The Emerson Smart Firewall protects the DeltaV system with an easy to use perimeter defense solution. Purpose built for easy
SUDT AccessPort TM Advanced Terminal / Monitor / Debugger Version 1.37 User Manual
SUDT AccessPort TM Advanced Terminal / Monitor / Debugger Version 1.37 User Manual Version 1.0 - January 20, 2015 CHANGE HISTORY Version Date Description of Changes 1.0 January 20, 2015 Initial Publication
Andover Continuum Remote Communication Configuration Guide
Andover Continuum Remote Communication Configuration Guide 2010, Schneider Electric All Rights Reserved No part of this publication may be reproduced, read or stored in a retrieval system, or transmitted,
Reliable Security Solutions
Reliable Security Solutions Challenger10 The proven solution for access control, intrusion detection and video integration. An integrated security solution for your most challenging environments The Tecom
Procedure: You can find the problem sheet on Drive D: of the lab PCs. Part 1: Router & Switch
University of Jordan Faculty of Engineering & Technology Computer Engineering Department Computer Networks Laboratory 907528 Lab. 2 Network Devices & Packet Tracer Objectives 1. To become familiar with
User Manual. BARKODES BİLGİSAYAR SİSTEMLERİ ARF Panel
1 User Manual Barkodes Bilgisayar Sistemleri Bilgi İletişim ve Yazılım Tic. Ltd. Şti. Adres: Altay Çeşme Mahallesi Sanayi Sokak No:8 Demirli Sitesi B Blok Maltepe-İstanbul/Turkey Tel: + 90 (216) 442 20
Connection and Configuration of Baudisch SIP unit with Display and RFID Reader Module
Connection and Configuration of Baudisch SIP unit with Display and RFID Reader Module This document explains connection and configuration of the Baudisch sip door module with the display and RFID reader
Gallagher Command Centre
DATASHEET Gallagher Command Centre security.gallagher.com Gallagher Command Centre is the central management platform for the Gallagher security system. Leveraging a client server architecture, the software
AxTraxNG Access Control Management Software
AxTraxNG Access Control Management Software ARCHITECTURAL AND ENGINEERING SPECIFICATIONS April 2013 Experience the Difference www.rosslaresecurity.com 5505-0228701-00 Table of Contents 1. General... 4
Starting Guide - Poseidon 3265 First steps for remote monitoring with Poseidon & GSM
Poseidon 3265 starting guide Poseidon 3265 Starting Guide - Poseidon 3265 First steps for remote monitoring with Poseidon & GSM 1) Connecting Poseidon 3265 1.1) Check DIP switches settings. For installation
RS232 Programming and Troubleshooting Guide for Turbo Controls
RS232 Programming and Troubleshooting Guide for Turbo Controls This Troubleshooting guide is intended for the set up and troubleshooting of the control panels onboard RS232 output. Refer to the Installation
To perform Ethernet setup and communication verification, first perform RS232 setup and communication verification:
PURPOSE Verify that communication is established for the following products programming option (488.2 compliant, SCPI only): DCS - M9C & DCS M130, DLM M9E & DLM-M9G & DLM M130, DHP - M9D, P series, SG,
TX3 Series TELEPHONE/CARD ACCESS SYSTEMS. System Introduction (Sales Training)
TX3 Series TELEPHONE/CARD ACCESS SYSTEMS System Introduction (Sales Training) The new TX3 is designed to provide the best performance and value in stand alone or fully integrated system configurations: