Heat Spy Infrared Thermometers Heat-Prober Thermocouple Meters

Transcription

1 Industrial Glass Thermometers Utility Pressure Gauges Slip-Fit Bimetal Thermometers Heat Spy Infrared Thermometers Heat-Prober Thermocouple Meters

2 HVAC INSTRUMENTATION Heat Spy Infrared Thermometers All DHS-100 Models Feature: Rugged, light-weight construction allowing quick pointing and easy carrying. Temperature measurement range of 0 to 850 F (-18 to 450 C). ± 3 F/± 2 C (or ± 2% of reading) accuracy. Large, easy-to-read LCD digits with switch on back light for low light conditions. Advanced Menu-Driven Models: DHS100XE and DHS100XEL: Menu selection of maximum, minimum, maximum differential, and average temperatures. Adjustable emissivity of 0.10 to F or C software-selectable. Audible and visual alarm at HI/LO setpoint. Menu selectable battery voltage and % of battery life displays. Memory recalls all previous temperature selections until next reading is taken. SPECIFICATIONS: DHS100 SERIES Parameter Temperature Range Accuracy at 23 ± 5 C, e= 0.95 Repeatability at 23 ± 5 C, e= 0.95 Response Time Temperature Update Rate Spectral Response Display Hold LCD Backlight Operation Temperature Display Display Resolution Power Typical Battery Life Ambient Operating Range Dimensions/Weight DHS-100 Heat Spys Are Low-Cost, Value-Packed Instruments All DHS100 Series Models 0 to 850 F (-18 to 450 C) Greater of ± 2% of reading or ± 3 F (2 C) Greater of ± 1% of reading or ± 2 F (1 C) 500 msec 5 Readings per second 7-18 microns nominal, thermopile detector Last reading and operating mode for 6 seconds User selectable membrane switch 3 Digit LCD, F or C switchable 1 F or 1 C in all modes One 9V Alkaline (included) or NiCad battery 150 hrs., 50% duty cycle, no backlight. 60 hrs., continuous operation, no backlight. 40 hrs., 50% duty cycle, with backlight 32 to 120 F (0 to 50 C) 5.5 X 2.0 X 8.5 (140 X 51 X 216mm); 11.2 oz. (318 gm) Low-drain battery operation with low-battery indicator. Display hold of last reading for 6 seconds. F or C range selectable. New two year warranty and upgrade policy. CE compliance. Laser Sighting Models: DHS100XL and DHS100XEL: Parameter DHS100X DHS100XE DHS100XL DHS100XEL Laser Sighting System None None Class 2 (1mW) Class 2 (1mW) Battery Life Indicator Warning icon Icon + volt. & % Warning icon Icon + volt. & % Emissivity Preset at to 1.00 select Preset at to 1.00 select Max/Min/ T No Yes No Yes Last Reading Recall No Yes No Yes High/Low Alarm None Audible and visual None Audible and visual Accessories Included None Carrying pouch Carrying pouch Carrying pouch Bright, safe laser aiming beam for precision targeting. Safe Class 2, 1mW laser beam sights at 0.5 above target center. CE 25 mm 15 cm 63 mm 51 cm 102 mm 0.9 M 152 mm 1.5 M DHS100 Series Heat Spys Target Size-to-Distance Ratio of 10:1 Target Size Distance 1" 6" 2.5" 20" 4" 3' 6" 5' DHS100XEL Heat Spy, Laser- Sighting Model with Menu-Driven Options. 2

3 TM400 &TM500 Heat-Prober Hand-Held Thermocouple Meters with Interchangeable Probes TM400 Product Features Handy, ergonomically designed meter with large-reading LCD. Switches between Fahrenheit and Celsius scale readings. Range of -58 to 1999 Fahrenheit (-50 to 1300 Celsius). Display resolution switch for choice of 1.0 to 0.1, F or C. Accepts Type K probes with standard ANSI mini-connectors. Data Hold button captures and holds the current reading. Display annunciator indicates Hold, Max, F, C temperature readings in addition to a low battery warning. Powered by four 1.5 V, AAA size batteries for 200 hours operation under typical usage conditions. Supplied completely operational with nylon carrying case with belt loop, one test probe and four batteries. 4 HVAC INSTRUMENTATION Heat-Prober Thermometers TM500 Product Features Battery-powered, microprocessor controlled thermocouple meter for use with interchangeable Type J or K thermocouple temperature sensing probes. Large dual LCD provides independent and concurrent temperature readings from two separate probes. Updated once per second. Dual probe input accepts one or two Type J or Type K Thermocouple probes with standard ANSI mini-connectors. Selectable temperature scale, Fahrenheit or Celsius readings. Type J range of -328 F to 1922 F (-200 C to 1050 C). Type K range of -328 F to 2498 F (-200 C to 1370 C). Main LCD displays the temperature reading from either selected probe or the temperature difference between the two. Third LCD displays time or timing duration (hours, minutes, seconds) of max/min or average temperature events. Recording mode allows data storage for man, min, and average temperatures reached over a time period. Set mode allows entry of reference and alarm points. Completely portable, powered by one 9V battery (included). Supplied with water and shock resistant rubber boot, built-in easel stand, 9V battery, and two Type K test probes. 7.5 X wide X (190 X 92 X 54mm) dimensions; weight 15.5 oz (440g) with battery and test probes. HEAT SPY PROBES AND ACCESSORIES* Model No. Description TP100 Needle-Tip Probe TP101 Fine-Tip Probe TP102 Sharp-Tip Probe TP200 Immersion Probe TP300 Clip-On Probe TP305 Air/Gas Probe TCL363K 3 Exposed Junction Wire/Connector TCL329K Extension Handle w/5 Lead TA70AFK 5-Point Field Calibrator F * Request Instrumentation Group Heat-Prober Catalog No. PW1155 for Wahl s Full Line of Hand-Held Meter and Probe Temperature Measurement Systems. CE TM400 Meter with Test Probe as Supplied TCL329 Extension Handle with TP200 Immersion Probe Attached 5 Available Type K Thermocouple Probes: 1. TP-100 Needle Tip 2. TP-101 Fine Tip 3. TP-200 General Purpose Immersion 4. TP-102 Sharp Tip Penetration 5. TP-300 Clip-On Oven / Air CE TM500 Meter with Two Test Probes as Supplied 3

4 HVAC INSTRUMENTATION Industrial Thermometers Economy Line Industrial Thermometers Flex Angle Adjustment: Just two screws permit cases to be rotated 180 and stems to be positioned in 10 increments. Users can infinitely adjust Economy Line Industrial Thermometers to virtually any viewing angle required. Easy Readability: Standard lens front glass tube is Red Reading mercury-filled (red spirit-fill option). Compact, yet visible 9 (229mm) or 12 (305mm) cases are fitted with a V-shaped white aluminum scale graduated with bold black lines and numerals. Accuracy: Economy Line Industrial Thermometers are calibrated against standards traceable to the National Institute of Standards and Technology (NIST) and are guaranteed accurate to ± one scale division. Construction: User selection of either tough, black-finished molded Valox case material (9FL Models) or extruded, black-finished aluminum case (9AL Models). Glass crystal, machined brass swivel nut, and cast aluminum, stem and seat are standard. Connection Assembly: Cast aluminum tapered bulb chamber allows maximum metal-to-metal contact with matching tapered thermowell for fast response and increased accuracy. Brass swivel nut is industry-standard 1-1/4-18 NEF thread. Range and Stem Length Selection: Full selection of Fahrenheit or dual, Fahrenheit/Celsius range scales available from -40 F (-40 C) to 550 F (290 C). Stock stem lengths of 3.5 (89mm), 6 (152mm), 8 (203mm), 9 (229mm), and 12 (305mm). Air Duct Construction: Air Duct Option Models (9FLAD and 9ALAD) feature a super-sensitive bare bulb protected by a 3/4 diameter perforated brass bulb guard. This design allows exposure to circulating air while still protecting the glass tube from impact during shipping, installation, or use. See detail illustration, page 5. BASE MODEL NUMBERS ALUMINUM CASE PLASTIC CASE Case Size 9 Scale 12 Scale 9 Scale 12 Scale 9 Scale 9 Scale Bulb Type Tapered Tapered Air Duct Air Duct Tapered Air Duct Stem Length: 3.5 (89mm) 9AL3.5 12AL3.5 N/A N/A 9FL3.5 N/A 6 (152mm) 9AL6 12AL6 9ALAD6 12ALAD6 9FL6 9FLAD6 8 (203mm) 9AL8 12AL8 N/A N/A 9FL8 N/A 9 (229mm) 9AL9 12AL9 N/A N/A 9FL9 N/A 12 (305mm) 9AL12 12AL12 9ALAD12 12ALAD12 9FL12 9FLAD12 AVAILABLE TEMPERATURE RANGES Fahrenheit Ranges Div. Dual, F & C Ranges Div. -40/110 F 2 F -40/110 F & -40/43 C 2 F/2 C 0/120 F 1 F 0/120 F & -17/49 C 1 F/ 1 / 2 C 0/160 F 2 F 0/160 F & -17/71 C 2 F/1 C 20/180 F 2 F 20/180 F & -6/82 C 2 F/1 C 30/240 F 2 F 30/240 F & 0/114 C 2 F/1 C 30/300 F 2 F 30/300 F & -1/149 C 2 F/1C (AL only) 50/400 F 5 F 50/400 F & 10/204 C 5 F/2 C (AL only) 100/550 F 5 F 100/550 F & 40/290 C 5 F/2 C Economy Industrial Thermometer Model 9FL with 3.5 Stem and 30 to 300 F Temperature Range. 4

5 Economy Line Industrial Specifications Form: All Angle Adjustable. Case: Painted Aluminum Case (9AL) or Molded Plastic Valox. Case Size: 9 (229mm) Plastic Case; 9 or 12 (305mm) Aluminum Case. Stem Material: Standard Cast Aluminum Stem and Seat. Stem Length: Listed in Base Model Table, Page 4. Ranges: Listed in Range Table, Page 4. Bulb: Choice of Tapered Bulb Chamber or Perforated Air Duct Design. Fitting: 1-1/4-18 NEF Machined Brass Swivel Nut. Scale Face: High-Visibility V-Shaped Painted Aluminum Scale, Black Markings. Glass Tube: Red Reading Mercury-Fill in Lens Reading Tube. Crystal: Glass Crystal Standard. Accuracy: Accurate to ± One Scale Division. Calibration: Calibrated to NIST Traceable Standards. Warranty: One Year Limited Warranty. AVAILABLE OPTIONS Options Description How to Order Brass stem / seat material Option Code B Stainless Steel stem / seat material Option Code S Red Spirit Fill (300 F/150 C limit) Option Code L 7 (178mm) Case Substitute 7 in place of 9 or 12 in Base Model No. Table Air Duct Flange Order Part No. 58 as separate item. HOW TO ORDER Base Temperature Option Model No. Range Code(s) Sample Model No. 9FLAD6 30/240F&0/114C B Sample Description 9 Case, Plastic 30/240 F & 0/114 C Brass Stem Case, Air Duct Dual Scale Range and Seat Stem in 6 Length Completed Model No.: 9FLAD630/240F&0/114CB THERMOWELLS Regular Series Thermowells Lagging Extension Thermowells Well Stem Insertion Model Stem Insertion Lagging Model Material Length S Length U No. Length S Length U Extension T No. Cast Brass A A Cast Brass A A Mach. Brass Mach. Brass Mach. Brass For a full listing of Industrial Thermometer Thermowells and Union Connections, Please Request Catalog No Regular Thermowell I U insertion length 21 D dia 32 D dia Overall Stem Length Set Screw 2.50 PALMER Lagging Extension Thermowell T I U insertion length 21 D dia 32 D HVAC INSTRUMENTATION Pressure Gauges Reference Dimensions for 9 Case Models Lock Screw 1-1/4-18 NEF Swivel Nut Seating Disk 11 dia Dia Stem Length 0.44 Dia Air Duct Stem Model Close-Up dia dia NEF THREAD 5 8 P NPT S stem length taper per fit NEF THREAD 5 8 P NPT S stem length taper per fit

6 HVAC INSTRUMENTATION Pressure Gauges Painted Steel Case Utility Gauges SPECIFICATIONS: 25PB, 40PB Case: Black Painted Steel in 2-1/2" (63mm) and 4" (100mm) case diameter. Window: Plastic on all models. Socket: Brass. Bourdon Tube: Brass - C tube. Connections: Stem Mount, Lower Connected, 1/4" NPT on both 2-1/2" and 4" gauges. Movement: Low friction, durable Brass. Pointer: Black painted aluminum, nonadjustable. Dial: White background with black graduations and lettering. Accuracy: 2-1/2" gauges are ± 2% mid-range; 4" gauges are ± 1.5% mid-range. Range Availability: Consult Range Chart on page 7 for availability. How To Order: Base Model Numbers- 2-1/2 Case 4 Case 25PBDLQ 40PBDLQ Add Range from Range Chart to complete a Model Number. 40PBDLQ60# Painted Steel Case Utility Gauge DIMENSIONS: 25PB, 40PB A B C D d H 2-1/ (63 mm) (9.0) (28.0) (10.5) (64.0) (63.0) (52.5) (100 mm) (22.0) (37.5) (15.0) (100.5) (99.0) (75.5) Stainless Steel Case Contractor Gauges SPECIFICATIONS: 45SB Case: 304 Series Stainless Steel Case and Bezel Ring; 4-1/2" (125mm) diameter. Window: All models use a plastic window. Socket: Brass. Bourdon Tube: Brass. Connections: 1/4" NPT standard. Mounting: Stem Mount, Lower Connected. Movement: Brass. Pointer: Black painted aluminum, zero adjustable from face of dial. Dial: White finished aluminum with black graduations and lettering. Accuracy: ± 1% mid-range. Range Availability: Gauge is available in PSI only. Consult Range Chart, page 7. How To Order: Base Model Number 45SBDLQ then, Add Range from Range Chart to complete a Model Number. 45SBDLQ160# Stainless Steel Case Contractor Gauge DIMENSIONS: 45SB 6

7 Stainless Steel Case Gauges, Dry and Glycerin Filled HVAC INSTRUMENTATION Pressure Heat-Prober Gauges SPECIFICATIONS: 25CB Case: AISI 304 Stainless Steel, 2 1/2" (63mm) case diameter. Available Fill: Glycerin Fill on Base Model Number 25CBWLQ Ring: AISI 304 Polished Stainless Steel, crimped onto case. Window: Plexiglass. Socket: OT 58 Brass. Bourdon Tube: Phosphorus Bronze C-Tube for ranges to 500 PSI. Spiral Tube for 600 PSI. Connections: Stem Mount, Lower Connected, 1/4" NPT. Movement: OT 59 Brass Gears with 304 Stainless Steel plates. Pointer: Balanced anodized aluminum. Dial: White aluminum with black markings. Accuracy: 1.6% of full scale. Range Availability: Consult Range Chart below for availability. How To Order: Base Model Numbers- Dry Gauge Filled Gauge 25CBDLQ 25CBWLQ Add Range from Range Chart to complete a Model Number. DIMENSIONS: 25CB 25CBDLQ1060# Stainless Steel Case Gauge A B C D d H 2-1/ (50 mm) (6.0) (30.0) (12.0) (68.0) (63.0) (55.0) RANGE CHART, ALL GAUGES 2-1/2" 4" 4-1/2" S indicates standard configuration indicates option availability indicates not available -30 Hg / 0 VAC -30 Hg / 15# CMPD -30 Hg / 30# -30 Hg / 60# -30 Hg / 100# -30 Hg / 200# -30 Hg / 300# 15# 30# 60# 100# 160# 200# 300# 400# 500# 600# 25PBDLQ 25CBDLQ 25CBWLQ 40PBDLQ 45SBDLQ S S S S S S S S S S S S S S S 7

8 HVAC INSTRUMENTATION Slip-Fit Bimetals Slip-Fit Bimetal Thermometers Designed to Slip into Existing Industrial Mercury-in-Glass Type Thermowells and Fit with Tapered Bulbs Providing Metal-to-Metal Contact 5 Dial Slip-Fit Bimetal Thermometer, All Angle Model 5AIE (Replaceable Element Model). Available in Two Styles and Two Dial Sizes: BI (Back Connected) and AI (All Angle) Styles with External Reset Gear. BIE and AIE Styles with Replaceable Element option and Adjustable Pointer. 3 and 5 dial sizes for both types. Rugged Design Features: Stainless steel case, stem, and tapered bulb chamber. Glass crystal with option for Plexiglass. Built-in over-range protection. Eliminates Conversion Kits: Built-in tapered bulb and 1-1/4 X 18 swivel nut fitting for SLIP-FIT Bimetal Thermometer interchange with existing Industrial Thermometer style thermowells. Replaceable Element Feature: (BIE & AIE Models): Easy to replace- just remove the element and save the case. Range changes can be easily made. In some applications, used with a Union fitting, the case and stem will serve as a thermowell. Adjustable or Fixed Back Connections: The All Angle (AI and AIE) Models offer easy adjustment to any viewing angle. Back Connected (BI and BIE) Models are fixed at the most common style connection. Accurate: Consistent accuracy is achieved within 1% of full scale. Ambient temperature changes at the case will not affect accuracy. Simple, Convenient Recalibration: Either reset gear or adjustable pointer feature (Replaceable Element only), permits setting for zero calibration error at any desired temperature within scale. Easy-To-Read 3 or 5 Dial: Deep drawn, anti-parallax dial design. Dial can be seen from a greater distance and from more angles than mercury-in-glass thermometers. Minimized reading errors from low-glare background with graduations and pointer on the same surface level. Hermetically Sealed Case: Securely sealed by quick-lock, cam-action bezel ring. Heavy, heat resistant gasket seals out moisture, prevents icing and helix freeze-up. How to Order Complete Thermometer: Select Base Model Numbers below, add Range from charts on page 9 to complete a Model Number. How to Order Replaceable Element Only: Specify applicable model using Base Model Numbers as follows: Back Connected All Angle 3 Dial 5 Dial 3 Dial 5 Dial 3BIEO 5BIEO 3AIEO 5AIEO add Stem Length and Range to complete a Model No. How to Order Case Only: Specify case size and form using Base Model Numbers BICO for Back Connected or AICO for All Angle. Add desired Stem Length. All exterior parts are included. Thermowells: See Palmer Catalog No for Series 114 Thermowells. BASE MODEL NUMBERS REPLACEABLE ELEMENT SLIP-FIT THERMOMETERS ALL ANGLE BACK CONNECTED Stem Length 3 Dial 5 Dial 3 Dial 5 Dial 3.5 3AIE 3.5 5AIE 3.5 3BIE 3.5 5BIE AIE 6 5AIE 6 3BIE 6 5BIE 6 8 3AIE 8 5AIE 8 3BIE 8 5BIE 8 9 3AIE 9 5AIE 9 3BIE 9 5BIE AIE 12 5AIE 12 3BIE 12 5BIE 12 EXTERNAL RESET GEAR SLIP-FIT THERMOMETERS ALL ANGLE BACK CONNECTED Stem Length 3 Dial 5 Dial 3 Dial 5 Dial 3.5 3AI 3.5 5AI 3.5 3BI 3.5 5BI AI 6 5AI 6 3BI 6 5BI 6 8 3AI 8 5AI 8 3BI 8 5BI 8 9 3AI 9 5AI 9 3BI 9 5BI AI 12 5AI 12 3BI 12 5BI 12 External Reset Gear (BI and AI Models) Allows Setting for Zero Error at Any Critical Temperature Point within the Thermometer s Scale Range. 8

9 Slip-Fit Thermometer Specifications Form: All Angle Adjustable or Fixed Back Connected. Case: Polished-Type 304 Stainless Steel Case and Bezel in 3 (76 mm) or 5 (127 mm) Size. Cases are Hermetically Sealed. Stem: Polished-Type 304 Stainless Steel. Stem Length: Listed in Base Model Table, Page 7. Custom Lengths Up to 60 (152 cm). Bulb: Type 303 Stainless Steel Tapered Bulb Chamber. Fitting: 1-1/4-18 Plated Brass Swivel Nut. Dial Face: Black Graduations and Numerals on White Background. Anti-parallax Dial Design with Linear Scale. High-Visibility Tapered-Tip Black Pointer. Crystal: Glass Crystal Standard. Optional Plexiglass. Recalibration: Replaceable Element Models ( AIE and BIE ) Have an Adjustable Pointer. Other Models ( AI and BI ) Have an External Adjustment ( Reset ) Gear. Accuracy: 1% of Full Range. Element: Bimetallic Coil Sensing Element Located in Bulb Tip. Over-Range: Protected Design Allows Temporary Swings of Up to 50% of Range without Permanent Damage to the Thermometer. Warranty: One Year Limited Warranty. HVAC INSTRUMENTATION Slip-Fit Bimetals Slip-Fit 3 Dial, Back Connected, with Replaceable Element Option. Model No. 3BIE 3.5 0/240 SLIP-FIT THERMOMETER DIMENSIONS Back Connected Slip-Fit Dimensions (3B and 5B Models) Adjustable Angle Slip-Fit Dimensions (3A and 5A Models) SLIP-FIT THERMOMETER RANGE CHART Fahrenheit Ranges Celsius Ranges -100/100F -50/50C -40/120F -50/100C 0/200F -20/120C 0/250F 0/50C 25/125F 0/100C 50/300F 0/150C 50/400F 0/200C 50/500F 0/300C 150/750F 100/400C 200/1000F* 100/500C* * Recommended for continuous service to 800 F/427 C. Can be used for intermittent service up to 1000 F/500 C. 3 Dial Slip-Fit Bimetal Thermometer, Back Connected Model 3BIE Shown with Replaceable Element Components: Dial Assembly with Pointer, Dial, Stem and Coil; Spacer; Gasket; Glass Crystal; and Bezel Ring. 9

10 HVAC INSTRUMENTATION Cross Reference Industrial Thermometer Cross Reference The following tables represent some of the most commonly used Industrial Thermometer configurations and a cross reference of manufacturer s Model Numbers. To complete a thermometer specification, add the range code for the appropriate temperature range from the Industrial Thermometer Range Code Table on page 11. STANDARD TAPERED STEM INDUSTRIAL THERMOMETERS Case Scale Conn. Stem Weksler Weksler Material Length Type Length Trend Moeller Taylor Trerice Dresser Glass Weiss Palmer Molded 9 All Angle 3.5 (89mm) A935A AA5H-9 9VU35 9FL3.5 Molded 9 All Angle 6 (152mm) A960A AA5L-9 9VU6 9FL6 Molded 9 All Angle 9 (229mm) A990A AA5N-9 9VU9 9FL9 Molded 9 All Angle 12 (305mm) A912A AA5Q-9 9VU12 9FL12 Aluminum 9 All Angle 3.5 (89mm) 903AW EA7203J BX914031/2 9AL3.5 Aluminum 9 All Angle 6 (152mm) 905AW EA7206J BX AL6 Aluminum 9 All Angle 8 (203mm) 908AW BX AL8 Aluminum 9 All Angle 12 (305mm) 912AW EA7212J BX AL12 Aluminum 9 Straight 3.5 (89mm) 903AWST EU7203J BX114031/2 9AL3.5 Aluminum 9 Straight 6 (152mm) 905AWST EU7206J BX AL6 Aluminum 9 Straight 8 (203mm) 908AWST EU7208J BX AL8 Aluminum 9 Straight 12 (305mm) 912AWST EU7212J BX AL12 Aluminum 9 Back 3.5 (89mm) 903AWBK EB7203J BX214031/2 9AL3.5 Aluminum 9 Back 6 (152mm) 905AWBK EB7206J BX AL6 Aluminum 9 Back 8 (203mm) 908AWBK EB7208J BX AL8 Aluminum 9 Back 12 (305mm) 912AWBK EB7212J BX AL12 Aluminum 9 Right Side 6 (152mm) ER7206J 9AL6 Aluminum 9 Left Side 6 (152mm) EL7206J 9AL6 AIR DUCT STEM INDUSTRIAL THERMOMETERS Case Scale Conn. Stem Weksler Material Length Type Length Trend Moeller Taylor Trerice Dresser Palmer Molded 9 All Angle 3.5 (89mm) D935A 9FLAD3.5 Molded 9 All Angle 6 (152mm) D960A 9FLAD6 Molded 9 All Angle 9 (229mm) D990A 9FLAD9 Molded 9 All Angle 12 (305mm) D912A 9FLAD12 Aluminum 9 All Angle 6 (152mm) 906AWD DA7206J BX ALAD6 Aluminum 9 All Angle 9 (229mm) 909AWD DA7209J 9ALAD9 Aluminum 9 All Angle 12 (305mm) 912AWD DA7212J BX ALAD12 Aluminum 9 Straight 6 (152mm) 906AWDST DU7206J 9ALAD6 Aluminum 9 Straight 9 (229mm) 909AWDST DU7209J 9ALAD9 Aluminum 9 Straight 12 (305mm) 912AWDST DU7212J 9ALAD12 Aluminum 9 Back 6 (152mm) 906AWDBK DB7206J 9ALAD6 Aluminum 9 Back 9 (229mm) 909AWDBK DB7209J 9ALAD9 Aluminum 9 Back 12 (305mm) 912AWDBK DB7212J 9ALAD12 Aluminum 9 Right Side 6 (152mm) DR7206J 9ALAD6 Aluminum 9 Left Side 6 (152mm) EL7206J 9ALAD6 PALMER Industrial Thermometer Models with shaded background are Equivalent Models in that they are All Angle rather than fixed connections. 10

11 Thermometer and Pressure Gauge Cross Reference HVAC INSTRUMENTATION Cross Reference INDUSTRIAL THERMOMETER RANGE CODE TABLE FAHRENHEIT TEMPERATURE RANGES TEMPERATURE RANGE MANUFACTURER S RANGE CODE Lower Upper Weksler Weksler (From) (To) Trend Moeller Taylor Trerice Dresser Glass Weiss Palmer -40 F 110 F /110F 01 F1-40/110F /110F -20 F 120 F /110F -10 F 180 F /110F 0 F 100 F 0/100F 02 0/120F 0 F 120 F 204 F2 0/120F 120 0/120F 0 F 160 F 205 0/160F 04 F3 0/160F 160 0/160F 20 F 180 F 20/180F 20/180F 30 F 120 F 30/120F 20/180F 30 F 180 F /180F 06 F /240F 30 F 240 F /240F F5 30/240F /240F 30 F 300 F /300F 08 F6 30/300F /300F 50 F 400 F 50/400F F7 50/400F 50/400F 50 F 550 F 50/500F F8 50/550F 50/400F 100 F 550 F 10 50/550F Dual, Fahrenheit and Celsius, Range Cross Reference Available On Line or On Request PALMER Models in shaded background are Equivalent Models PRESSURE GAUGE CROSS REFERENCE Case Case Tube/ Fill Diameter Material Socket Type Mount Conn. 2.5 Painted Brass/ (63.5mm) Steel Brass Dry Lower 1/4 NPT UA25*4L 25PBDLQ* 2.5 Painted Bronze/ P50021/ (63.5mm) Steel Brass Dry Lower 1/4 NPT *1/4LM A02L* * 25PBDLQ* 3.5 Painted Bronze/ P50031/2 (89mm) Steel Brass Dry Lower 1/4 NPT *1/4LM UA35*4L * 40PBDLQ* 4.5 Painted Bronze/ P50041/2 (114mm) Steel Brass Dry Lower 1/4 NPT *1/4M * 40PBDLQ* 4.5 Stainless Bronze/ (114mm) Steel Brass Dry Lower 1/4 NPT A02L* EA14* 4CTS-1* 45SBDLQ* 2.5 Stainless Bronze/ (63.5mm) Steel Brass Dry Lower 1/4 NPT A02L* J7*L 25CBDLQ* 2.5 Stainless Bronze/ BY12Y LF25S-1 (63.5mm) Steel Brass Glycerin Lower 1/4 NPT 555L* AL02L* J6*LGF *4LW *1/4 LM 25CBWLQ* * Insert Range Code at * point in the Base Model Numbers, above, in order to complete a Model Number. U.S. Gauge AMETEK Dresser Ashcroft McDaniel Controls Dresser Weksler Trerice Weiss Palmer Pressure Gauge Range *Manufacturer s Range Code -30 In Hg / 0 PSI 30 Hg Vac 30/0 CB 30 to in Hg/0# -30 In Hg / 0 / 30 PSI psi 30/30 S VC 30 to in Hg/0/30# 15 PSI 15psi 0/15 A 0 to # 30 PSI 30psi 0/30 B PD 0 to # 60 PSI 60psi 0/60 C PE 0 to # 100 PSI 100psi 0/100 D PF 0 to # 160 PSI 160psi 0/160 E PG 0 to # 200 PSI 200psi 0/200 F PH 0 to # 300 PSI 300psi 0/300 G PJ 0 to # 400 PSI 400psi 0/400 H 0 to # 600 PSI 600psi 0/600 I PM 0 to # 11

12 Process Installation Sanitary Application Instruments Thermowells & Fittings Recorders Non-Contact Infrared Thermometers Hand-Held Meters & Probers Laboratory & Reference Instruments HVAC INSTRUMENTATION PW1190 Palmer Bimetals Palmer Pressure Gauges Wahl Heat-Spy Infrared Thermometers Wahl Heat Prober Measurement Solutions... from the Instrumentation Group Process Installation Palmer Rigid and Remote Dial Thermometers. 3-1/2" and 5" All Stainless Steel Construction Case. Direct Drive, Mercury and Liquid-Actuated. Fixed Stem or Remote Reading Models with Full Selection of Temperature Ranges, Mounting Options, Bulb Configurations, and Stem Lengths. Palmer All Star Bimetal Dial Thermometers. 3" and 5" Dials, Heavy-Duty Stainless Steel Cases with Back or All Angle Connection. Standard or Custom Ranges and Stem Lengths. Unique Replaceable Element and Slip-Fit Models Available. Palmer Industrial Process Thermometers, Red-Reading Mercury Actuated. 3AA Series with Chrome Finished Solid Brass Case in 9" or 12" Size. 9" or 12 Case Economy Line. Dual-Sensing Industrials. Wahl Digi-Stem Digital Thermometers for Process Installation. Battery or Loop Powered LCD Read-Outs. Palmer Thermowells for All Process Installations. Palmer Pressure Gauges All Stainless Steel Gauges, Dry and Glycerin-Filled. 2-1/2, 4 and 6 Cases. Phenolic 4-1/2 Case Gauges, Solid Front and Blow-Out Models. Low Pressure Gauges, 2-1/2 and 4 Cases. One-Piece Brass Case Gauges, 2-1/2 Case. Stainless Steel Sanitary Gauges for Food and Beverage Process. Painted Steel Case Contractor Gauges. Test Gauges, Solid Front or Blow-Out. Electrical Contact and Current Loop Gauges. Piston Type Snubbers, Pigtail Steam Siphons and Needle Valves. Wahl Heat Spy Non-Contact Infrared Thermometers The Perfect Measurement Tool for High Temperatures, Inaccessible Areas, Moving Surfaces or Hazardous Conditions. Industry s Widest Range of Products for Applications from General Purpose Maintenance to Specialized Processes. Models for High Temperature (up to 5500 F), Small Targets (down to 0.08"), and Distant Targets (up to 300 ft.). Target Sighting Options Include Open Sight, Enclosed Optical Sight, Telescopic Sight and Laser Sight Systems. High-Visibility LED and LCD Displays, Adjustable Emissivity, Temperature Alarms, Averaging, and Other Options Available. Wahl Heat Prober Hand-Held Meters Series 392 Platinum-RTD Heat-Probers Offer Exceptional Accuracy and Long-Term Stability in a Versatile System of Battery- Powered Hand-Held Meters and Interchangeable Probes. Type K Thermocouple Heat-Prober Series 2500 and 1370 Meters Utilize Standard Mini- Connector Sensing Probes to Provide Rugged, Accurate and Fast Temperature Measurement Capabilities. New Model TM-400 Digital Heat-Prober. Low-Cost, Value-Packed Digital LCD Meter. Accepts all Type K Thermocouple Probes with ANSI Mini-Connectors. New Model TM-500 Digital Heat-Prober with Microprocessor Features. Dual Probe Input (Type J or K) and Dual Readout. RTD and Thermocouple Interchangeable Probes. Wide Range of Probe Designs. Permanent Installation Probes Also Available. Temperature and Pressure Recorders Wahl Temp-Plate Irreversible Temperature Recording Labels. Standard, MICRO and MINI Sizes in 4, 6, and 8-Position Models. Temperature Ranges from 90 F (32 C) up to 500 F (260 C). Palmer Circular Chart Recorders. 8" and 12" Recorders for Pressure, Temperature, and Pressure/Temperature. Wall-Mount, Pipestand, Portable or Pedestal Mount. Accessories and Replacement Parts. Palmer Instruments, Inc. Wahl Instruments, Inc. 234 Weaverville Highway, Asheville, NC TEL (828) FAX (828) palmerwahl@instrumentationgroup.com