Quality Engineering and Management Research Centre
|
|
- Ambrose Thomas
- 8 years ago
- Views:
Transcription
1
2 WHO WE ARE AND WHAT WE ARE STRIVING FOR The Quality Engineering and (QEMRC) was established in 2002 within the Technical University of Cluj-Napoca. The is an advanced research and training unit encompassing equipment, facilities and interdisciplinary knowledge, focused on topics related to quality. VISION To be the national leader and a widely internationally recognised centre of competence in the field of quality engineering and management. MISSION To improve the competitiveness of the Romanian society and organisations within the economic environment, by generating, integrating and transferring quality engineering and management knowledge and by developing their quality culture through research, education/training and direct assistance.
3 OBJECTIVES To develop master, doctoral and life-long learning study programs, in the field of quality engineering and management; To continually enhance our research capability; To offer solutions to the organisations from the economical environment for the design, development and continual improvement of their products and processes. STRUCTURE The QEMRC comprises three research laboratories: CAD/CAM/CAQ Precision 3D Scanning and Measuring Measurement and Industrial Applications FIELDS OF COMPETENCE Quality and integrated management systems; Methods and techniques for continual improvement; CAD, CAM, CAQ; Precision 3D measurements, 3D surface scanning; Training methods in virtual environment ; Computer aided high speed data acquisition and process monitoring and control; Tools and techniques for new product development; Reverse engineering.
4 RESEARCH DIRECTIONS Quality improvement of products, processes and organisations; Simulation of products and automated manufacturing systems using CAD, CAM, CAQ; Customer oriented new product design and development; e-learning methods and platforms; Measuring of organisational and process performance; Quality in higher education; Web technologies for process monitoring and control. EDUCATION AND TRAINING The QEMRC offers training within the academic environment through master and doctoral studies. EDUCATION Doctoral study programs in the field of quality engineering and management. Master study programs coordinated by QEMRC are: Quality engineering; Computer aided design of products, processes and integrated systems; Robotics and automated manufacturing systems (with teaching in English, in partnership with HAMK University of Applied Sciences Finland).
5 EDUCATION AND TRAINING The QEMRC also responds to the needs of the economic environment by providing customised training (life-long learning) for industry. TRAINING Quality management; CAD-CAM in mechanical engineering; Design and simulation of integrated manufacturing systems; Techniques, instruments and methods of quality management for the continual improvement of products, processes and organisations; Training for using coordinate measuring machines and 3D scanning systems.
6 CONSULTANCY AND CUSTOMER SERVICE The provides direct assistance services for: 3D surface scanning; 3D measurements (lengths, angles, shape profile deviation) and video inspections for dimensional control; Reverse engineering; Integrated manufacturing solutions and industrial automation; e-learning methods and platforms. and consultancy in the following fields: General management; Design and implementation of quality and integrated management systems; Applying methods and techniques for the continuous improvement of the product and processes, as well as for the competitive development of products and organisations; Consultancy for reverse engineering and designing measurement strategies; Consultancy for selecting, purchasing, utilisation and management of measuring equipment. Some of our beneficiaries are: RAJA Aquabis Bistriţa, Vivaldius Reghin, C.U.G. Cluj-Napoca, FRANKE România, S.C. Leoni Wiring Systems S.R.L. Bistriţa, S.C. Naposint S.A., S.C. Sanex S.A. Cluj-Napoca.
7 THE INFRASTRUCTURE OF THE CENTRE 5 COMPUTER NETWORKS - 60 computers, 5 servers MEASUREMENT EQUIPMENT AND SOFTWARE: RENISHAW 3D Scanning machine - Cyclone Series 2 ABERLINK 3D measuring machine - Axiom CIMCORE Stinger II - portable measurement device KREON ZEPHYR TECHNOLOGIES 3D Laser Scanner TRACECUT software POWER INSPECT software
8 THE INFRASTRUCTURE OF THE CENTRE VIRTUAL REALITY EQUIPMENT AND SOFTWARE: EON ICATCHER, EON VIRTUAL STUDIO, DG5-VHand CAD/CAM SOFTWARE: DELCAM, DELMIA, Autodesk Products, CATIA, SolidWorks
9 THE INFRASTRUCTURE OF THE CENTRE NATIONAL INSTRUMENTS EQUIPMENT & SOFTWARE FOR DATA/IMAGE ACQUISITION AND PROCESS CONTROL: 12 Data acquisition boards,12 Portable data acquisition modules, Programmable field-point system for data acquisition and control for distributed industrial applications, 2 Image acquisition boards, LabVIEW NI - A completely integrated visual programming language and hardware for data acquisition and processing, SAMSUNG Digital Camera, can be used and manipulated from the distance via INTERNET using the Ethernet transfer data, 2 Industrial high resolution digital cameras for video image processing. SOFTWARE FOR PRODUCT AND PROCESS DEVELOPMENT Qualica QFD Rektron FMEA
10 RESEARCH PROJECTS RESEARCH & DEVELOPMENT PROJECTS AND FUNDING ORGANISATIONS TEMPUS: Quality school - Pilot centre for continuous education in Quality assurance and management, Funded by: The European Training Foundation, Trainig system for teaching computer aided process measurement and control, Funded by: The Romanian Ministry for Education and Research, Computer aided control of Robotic Kinematic Axes, Funded by: Romanian Ministry for Education and Research, Quality management methods applied to the University Research Management, Funded by: The Romanian National Council for Research in Higher Education, Research for Quality Engineering and Management, Major project Research base with multiple users, Funded by: The World Bank and The Romanian National Council for Research in Higher Education, Quality engineering tools and methods as support for the reform of Romanian institutions and economy, Major project Master-doctoral program, Funded by: The World Bank and the Romanian National Council for Research in Higher Education. Quality management integration along the design-development-fabrication cycle, Funded by: The Romanian National Council for Research in Higher Education, Robotised system for 3D surface cleaning, CERES Project, Funded by Romanian Ministry for Education and Research. SOME OF OUR PROJECTS PARTNERS University of Stuttgart, Germany, Friedrich-Alexander University, Erlangen-Nuremberg, Germany, Vienna University of Technology, Austria, University of Central Lancashire, Preston, United Kingdom, Bournemouth University, United Kingdom, HAMK University of Applied Sciences, Valkeakoski, Finland, Babeş-Bolyai University, Cluj-Napoca, Romania, University of Medicine and Pharmacy, Cluj-Napoca, Romania, University of Agricultural Sciences and Veterinary Medicine, Cluj-Napoca, Romania, Lucian Blaga University, Sibiu, Romania, Institute for Quality Assurance (IQA) London, United Kingdom, European Organisation for Quality, Korean International Cooperation Agency (KOICA) - Government of South-Korea, Romanian Accreditaton Association (RENAR), The Patrimoniu Foundation of the Romanian Academy.
11 CURRENTLY RUNNING PROJECTS Integrated platform of research and education for innovative production Factory of the future The purpose of this project is to develop a knowledge community able to integrate within a research and education platform (generically called Factory of the Future ) elements of infrastructure, equipments, facilities and knowledge at the most advanced European standards and practices in the interdisciplinary and transdisciplinary field of innovative production. Innovative production consists in developing and integrating in a harmonized way all the phases of the enterprise life-cycle with all the phases of the extended product life-cycle with the purpose to generate innovative, intelligent products, based on new knowledge, with high value-added, new business models, new forms of organization, new technologies, new equipment and manufacturing systems. The QEMRC is one of the initiators of this research project and coordinates the teaching/learning division of the Factory of the future platform.
12 CONTACT QUALITY ENGINEERING AND MANAGEMENT RESEARCH CENTRE TECHNICAL UNIVERSITY OF CLUJ-NAPOCA CLUJ-NAPOCA, ROMANIA BLVD. MUNCII, NO TEL/FAX: WEB PAGE: COORDINATOR:
Automotive Applications of 3D Laser Scanning Introduction
Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc
More informationApplication Example: Reverse Engineering
Application Example: Reverse Engineering Use of optical measuring technology in the ceramics industry Measuring system: ATOS Keywords: Reverse Engineering, Tool and Moldmaking, Quality Assurance, Ceramic
More information3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM
3D SCANNING: A NEW APPROACH TOWARDS MODEL DEVELOPMENT IN ADVANCED MANUFACTURING SYSTEM Dr. Trikal Shivshankar 1, Patil Chinmay 2, Patokar Pradeep 3 Professor, Mechanical Engineering Department, SSGM Engineering
More informationBackground: Experimental Manufacturing Cell
Session 3548 A WEB-BASED APPROACH TO AUTOMATED INSPECTION AND QUALITY CONTROL OF MANUFACTURED PARTS Immanuel Edinbarough, Manian Ramkumar, Karthik Soundararajan The University of Texas at Brownsville/Rochester
More informationOptical Digitizing by ATOS for Press Parts and Tools
Optical Digitizing by ATOS for Press Parts and Tools Konstantin Galanulis, Carsten Reich, Jan Thesing, Detlef Winter GOM Gesellschaft für Optische Messtechnik mbh, Mittelweg 7, 38106 Braunschweig, Germany
More informationUsing NI Vision & Motion for Automated Inspection of Medical Devices and Pharmaceutical Processes. Morten Jensen 2004
Using NI Vision & Motion for Automated Inspection of Medical Devices and Pharmaceutical Processes. Morten Jensen, National Instruments Pittcon 2004 As more control and verification is needed in medical
More informationVirtual Training Centre for CNC: An Accomplished Cooperation Case
Virtual Training Centre for CNC: An Accomplished Cooperation Case Prof. Dr. Süleyman Yaldiz Technical Science College, Selcuk University, Konya, Turkey syaldiz@selcuk.edu.tr Abstract Recently cooperation
More informationIndustry 4.0 Vision to Reality Siemens AG 2015 siemens.com
Alan Norbury Siemens UK Industrial CTO Industry 4.0 Vision to Reality siemens.com Future of Manufacturing - Video http://www.siemens.co.uk/future-of-manufacturing Page 2 Industry 4.0.moving into a fourth
More informationManufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique
Manufacturing Process and Cost Estimation through Process Detection by Applying Image Processing Technique Chalakorn Chitsaart, Suchada Rianmora, Noppawat Vongpiyasatit Abstract In order to reduce the
More informationFOREIGN STUDENTS IN ROMANIA
FOREIGN STUDENTS IN ROMANIA The national educational system is open according to the law also for foreigners. The enrollment of foreign citizens into the Romanian educational system is realized regarding
More informationCAGILA 2D and 3D software
CAGILA 2D and 3D software CAM-Service does present the new CAGILA 3D software. Beside all common data formats like STEP, IGES, VDAFS, CAGILA 3D also supports interfaces for popular native formats like
More informationV6 PLM Express. Bringing PLM 2.0 Values to the Mid Market
V6 PLM Express Bringing PLM 2.0 Values to the Mid Market PLM 2.0 Within Your Reach The virtual world is playing a greater role in how we live, work and play. And today s Product Lifecycle Management (PLM)
More informationProduct and Service Catalog 2009 Direct Dimensions, Inc.
Product and Service Catalog 2009 LASER SCANNERS... 4 SURPHASER LASER SCANNER... 4 DIMENSIONAL IMAGING DI3D... 4 VIALUX Z-SNAPPER 3D CAMERA... 4 KONICA MINOLTA RANGE7 3D DIGITIZER... 4 KONICA MINOLTA VIVID
More informationCCH III. Domestic regulations for recruiting and retaining CSME. implemented in Member States by 2011
CCH III REGIONAL PROGRAMME AREA: HUMAN RESOURCE DEVELOPMENT GOAL: Human resources within the sector developed to respond to the needs of the people PRIORITIES OBJECTIVES NATIONAL EXPECTED RESULTS Movement
More informationProductivity+ CNC plug-in
Productivity+ CNC plug-in Productivity+ CNC plug-in The Productivity+ CNC plug-in is a unique software application for CNC machine tools, offering unparalleled opportunities for workpiece measurement,
More informationDESIGN & PROJECT MANAGEMENT
AIM recognises that the success of any project depends upon the presence of a robust project management process and structure. In recent years the company has made considerable investment in personnel,
More informationEngineering Design and Mathematics
Opportunities in Engineering Design and Mathematics Professional development and capability Welcome Employees whether you are looking for short courses or academic learning to support your role in your
More informationTypes of 3D Scanners and 3D Scanning Technologies.
Types of 3D Scanners and 3D Scanning Technologies. There are many types of 3D scanners and 3D scanning technologies. Some are ideal for short range scanning while others are better suited for mid or long
More informationPCB Component Placement Inspection
Executive Summary PCB Component Placement Inspection Optimet s ConoProbe Mark10 HD with a 50 mm focal length lens was used to inspect PCB component placement. The PCB board inspected contained both individual
More informationMH - Gesellschaft für Hardware/Software mbh
E.d.a.s.VX Data acquisition on board road and track vehicles The E.d.a.s.VX System is designed for portable applications running on 12 Volts DC, and is capable of measuring at selectable rates up to 30,000,000
More informationMCADD COURSE STRUCTURE
MCADD COURSE STRUCTURE S.No Course code Software used Duration Master Diploma in Product Design and Analysis 1 MCADD MD40 CATIA V5 +NX CAD +NX CAM +Ansys +PPM Concepts +MSP 2010 (mechanical)+gd & T 360
More informationTheoretical and Experimental Contributions Regarding the Optimization of Rapid Prototyping Technologies
TECHNICAL UNIVERSITY OF CLUJ-NAPOCA FACULTY OF MACHINE BUILDING Theoretical and Experimental Contributions Regarding the Optimization of Rapid Prototyping Technologies Doctoral thesis ABSTRACT Scientific
More information3D Vision An enabling Technology for Advanced Driver Assistance and Autonomous Offroad Driving
3D Vision An enabling Technology for Advanced Driver Assistance and Autonomous Offroad Driving AIT Austrian Institute of Technology Safety & Security Department Christian Zinner Safe and Autonomous Systems
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More information3D REVERSE ENGINEERING SOFTWARE
3D REVERSE ENGINEERING SOFTWARE PRODUCT WORKFLOWS GEOMAGIC STUDIO WORKFLOW SCAN AND PROBE Collect 3D point cloud and probe data from physical objects to form the basis of the new 3D model. PROCESS Use
More informationIntelligent Flexible Automation
Intelligent Flexible Automation David Peters Chief Executive Officer Universal Robotics February 20-22, 2013 Orlando World Marriott Center Orlando, Florida USA Trends in AI and Computing Power Convergence
More informationMasters in Information Technology
Computer - Information Technology MSc & MPhil - 2015/6 - July 2015 Masters in Information Technology Programme Requirements Taught Element, and PG Diploma in Information Technology: 120 credits: IS5101
More informationComputer Aided Design and Drafting (CAD)
Oakland Community College 2015-2016 Catalog 1 Computer Aided Design and Drafting (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well as
More informationNUARB TRAINING ACADEMY
NUARB TRAINING ACADEMY NUARB TRAINING ACADEMY Adding value to your people COPYRIGHT: The course materials are protected by Copyright laws and may not be reproduced or distributed without consent by NUARB
More informationIndustrial Vision Days 2012 Making Cameras Smarter: FPGA Based Image Pre-processing Unleashed
Industrial Vision Days 2012 Making Cameras Smarter: FPGA Based Image Pre-processing Unleashed Announcement of Partnership Seite: 3 High Quality Digital Cameras and Vision Sensors Visual FPGA Programming
More informationZEISS T-SCAN Automated / COMET Automated 3D Digitizing - Laserscanning / Fringe Projection Automated solutions for efficient 3D data capture
ZEISS T-SCAN Automated / COMET Automated 3D Digitizing - Laserscanning / Fringe Projection Automated solutions for efficient 3D data capture ZEISS 3D Digitizing Automated solutions for efficient 3D data
More informationNext Generation e-learning. Nicolas Apostolopoulos Freie Universität Berlin Center for Digital Systems
Nicolas Apostolopoulos Freie Universität Berlin Center for Digital Systems About Learning and Technologies What is TEL? A phone? 2 About Learning and Technologies What is TEL? A Telecom Company? 3 About
More informationHigh speed 3D capture for Configuration Management DOE SBIR Phase II Paul Banks Paul.banks@tetravue.com
High speed 3D capture for Configuration Management DOE SBIR Phase II Paul Banks Paul.banks@tetravue.com Advanced Methods for Manufacturing Workshop September 29, 2015 1 TetraVue does high resolution 3D
More informationPerspectives of Open and Distance Learning in Myanmar
Perspectives of Open and Distance Learning in Myanmar Dr Hla Tint Acting Rector Yangon University of Distance Education Abstract This paper deals with the present situation of distance education implemented
More informationCMA ROBOTICS ROBOT PROGRAMMING SYSTEMS COMPARISON
CMA ROBOTICS ROBOT PROGRAMMING SYSTEMS COMPARISON CMA Robotics use different methods to program his robot depending model and process, this document will explain all this system advantage connected with
More informationHow To Measure Contactless Measurement On A Robot
Thickness and surface area measurements in free space Jan Reinder Fransens Overview Introduction Irmato Contactless measurement Current system Control software White light sensor Free form measurement
More informationTHE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS
METROLOGY SOLUTIONS THE OPTICAL CMM 3D SCANNERS FOR INDUSTRIAL APPLICATIONS PORTABLE 3D MEASUREMENT SOLUTIONS The arm-free handheld MetraSCAN 3D line-up of optical CMM 3D scanning systems and the C-Track
More informationAutonomous Advertising Mobile Robot for Exhibitions, Developed at BMF
Autonomous Advertising Mobile Robot for Exhibitions, Developed at BMF Kucsera Péter (kucsera.peter@kvk.bmf.hu) Abstract In this article an autonomous advertising mobile robot that has been realized in
More informationni.com/vision NI Vision
ni.com/vision NI Vision The NI Vision Approach Integrate NI LabVIEW graphical system design software across the entire NI vision hardware portfolio to create a flexible, open platform that reduces development
More informationMoveInspect HF HR. 3D measurement of dynamic processes MEASURE THE ADVANTAGE. MoveInspect TECHNOLOGY
MoveInspect HF HR 3D measurement of dynamic processes MEASURE THE ADVANTAGE MoveInspect TECHNOLOGY MoveInspect HF HR 3D measurement of dynamic processes Areas of application In order to sustain its own
More informationArm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI
Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite
More informationIMPLEMENTING A SPC INTEGRATED SYSTEM TO IMPROVE MANUFACTURING PROCESSES IN AUTOMOTIVE INDUSTRY
IMPLEMENTING A SPC INTEGRATED SYSTEM TO IMPROVE MANUFACTURING PROCESSES IN AUTOMOTIVE INDUSTRY L., Lobon 1, C. V., Kifor 2, C., Oprean 3 and O., Suciu 4 1 Lucian Blaga University of Sibiu, lucian.lobont@ulbsibiu.ro
More informationCyclone - the complete scanning system for reverse manufacturing
Scanning technology that transforms 3D data capture Cyclone - the complete scanning system for reverse manufacturing Automated unmanned scanning with easy-to-use software Scanned data manipulation and
More informationprint close Building Blocks
print close Machine Design Kim Hartman Wed, 2015-07-15 11:23 Many OEMs strive to maximize plant productivity by allowing machines to perform multiple operations simultaneously. Some of these concurrent
More informationVERSATILE AND EASY-TO-USE 3D LASER SCANNERS > >
VERSATILE AND EASY-TO-USE 3D LASER SCANNERS > > A WORLD OF APPLICATIONS 3D Systems, producers of the industry s fastest, easiest-to-use and most versatile 3D scanners, makes 3D scanning ideal for a wide
More informationPreciTrack3D GmbH. PRECI 3D TRACK PRECI 3D GUN PRECI 3D SCAN PRECI 3D ROBOGUN PRECI 3D CONFOCAL PRECI 3D REF Tube Inspection & Measurements PRODUCTS
HIGHLIGHTS 3D Real Time Tracking Quality Control & Inspection Reverse Engineering ID 2D 3D Scanning PRODUCTS PRECI 3D TRACK PRECI 3D SCAN PRECI 3D CONFOCAL PRECI 3D REF Tube Inspection & Measurements PRECI
More informationSensors for plastic manufacturing Solutions in partnership from a single source
Sensors for plastic manufacturing Solutions in partnership from a single source Material supply Continuous granule supply Detection and positioning of semi-finished goods Processing Clamping force monitoring
More informationBasler. Area Scan Cameras
Basler Area Scan Cameras VGA to 5 megapixels and up to 210 fps Selected high quality Sony and Kodak CCD sensors Powerful Gigabit Ethernet interface Superb image quality at all resolutions and frame rates
More informationME 521 Computer Aided Design. 1. Introduction to CAD
Computer Aided Design Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü Basic Definitions CAD: Computer Aided Design is the use of computer technology for
More informationPRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software
PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis
More informationComplete Manufacturing Solutions
Complete Manufacturing Solutions Complete CADCAM Solutions A wholly-owned, independently-operated subsidiary of Autodesk 150 offices and partners in over 80 countries The Delcam Edge Complete Manufacturing
More informationAlphacam Art combines Vectric s Aspire artistic design software with the market leading Alphacam manufacturing software.
Alphacam Art Alphacam Art - CNC Routing For Artists & Ideal Jewellery Cad Cam Software Alphacam Art combines Vectric s Aspire artistic design software with the market leading Alphacam manufacturing software.
More informationEUROPASS DIPLOMA SUPPLEMENT
EUROPASS DIPLOMA SUPPLEMENT TITLE OF THE DIPLOMA (ES) Técnico Superior en Programación de la Producción en Fabricación Mecánica TRANSLATED TITLE OF THE DIPLOMA (EN) (1) Higher Technician in Mechanical
More informationPatternmaking CAD CAM models Jigs and fixtures Press tools
Lofting Services North West CNC precision machining Patternmaking CAD CAM models Jigs and fixtures Press tools Lofting Services North West Human Head Stage 1 Machining used to simulate fighter pilot retinal
More informationIntegration Services
Integration Services EXPERIENCED TEAM ADVANCED TECHNOLOGY PROVEN SOLUTIONS Integrations for large scale metrology applications Metris metrology to streamline your CAPABILITIES Advanced systems design Engineering
More informationComputer Aided Systems
5 Computer Aided Systems Ivan Kuric Prof. Ivan Kuric, University of Zilina, Faculty of Mechanical Engineering, Department of Machining and Automation, Slovak republic, ivan.kuric@fstroj.utc.sk 1.1 Introduction
More informationFREQUENTLY ASKED QUESTIONS
C FREQUENTLY ASKED QUESTIONS 1 [Q] What is the MakerBot Digitizer [A] The MakerBot Digitizer Desktop 3D Scanner quickly turns the things in your world into 3D models that you can modify, improve, share,
More informationEnter into the world of unprecedented accuracy! IScan D104 Series
Enter into the world of unprecedented accuracy! IScan D104 Series 2 Three scanners, one goal: Precisely fitting restorations The D104 Series of 3D scanning systems is the 5th generation of dental scanners
More informationHEALTHCARE AND MEDICAL DEVICES
HEALTHCARE AND MEDICAL DEVICES PORTUGUESE ENGINEERING AND TOOLING ENGINEERING & TOOLING FROM PORTUGAL A Cluster supporting Healthcare Industries. The Portuguese Engineering & Tooling Industry coordinated
More informationApplications > Robotics research and education > Assistant robot at home > Surveillance > Tele-presence > Entertainment/Education > Cleaning
Introduction robulab 10 is a multi-purpose mobile robot designed for various indoor applications, such as research and education, tele-presence, assistance to people staying at home. robulab 10 is a generic
More informationAML710 CAD LECTURE 1. Introduction to CAD. Motivation Principles of CAD / CAM. AML710 Computer Aided Design
AML710 CAD LECTURE 1 Introduction to CAD Motivation Principles of CAD / CAM AML710 Computer Aided Design L-T-P 3-0-2 : 4 Credits Prerequisites and background Course Coordinator Course Webpage http://web.iitd.ac.in/~hegde/cad
More informationSIAMA. SIAMA Asset Management Technologies Advanced Inspection Technology
Prolonging Infrastructure Assets Life Asset Management Technologies Advanced Inspection Technology Smart Infrastructure Asset Management Australia () Research and Development Research & Development company
More informationVERSATILE AND EASY-TO-USE 3D LASER SCANNERS > >
VERSATILE AND EASY-TO-USE 3D LASER SCANNERS > > A WORLD OF APPLICATIONS Z Corporation, producers of the industry s fastest, easiest-to-use and most versatile 3D scanners, makes 3D scanning ideal for a
More informationDAMAGED ROAD TUNNEL LASER SCANNER SURVEY
University of Brescia - ITALY DAMAGED ROAD TUNNEL LASER SCANNER SURVEY Prof. Giorgio Vassena giorgio.vassena@unibs.it WORKFLOW - Demand analysis - Instruments choice - On field operations planning - Laser
More informationContinental Automotive Romania - Central Electronic Plant Career Perspectives for Students & Fresh Graduates
Continental Automotive Romania - Central Electronic Plant Career Perspectives for Students & Fresh Graduates www.romania.careers-continental.com Career Perspectives 2 Career Perspectives 3 Tehnical University
More informationCNC Handbook. Helmut A. Roschiwal. Hans B. Kief. Translated by Jefferson B. Hood. Mc Graw Hill. Singapore Sydney Toronto
Hans B. Kief Helmut A. Roschiwal CNC Handbook Translated by Jefferson B. Hood Mc Graw Hill New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore Sydney
More informationHAMK University of Applied Sciences (Hämeen Ammattikorkeakoulu)
HAMK University of Applied Sciences (Hämeen Ammattikorkeakoulu) Education Research - Development Education System of Finland Students at universities of applied sciences receive both theoretical knowledge
More informationOne solution, countless benefits
www.exordia.co.za One solution, countless benefits exsam New generation strategic asset management PwC s exsam is built to empower the strategic management of diverse assets. 2 exsam One solution, countless
More informationFactories of the Future beyond 2013 A view from Research: The role of ICT
Factories of the Future beyond 2013 A view from Research: The role of ICT Engelbert Westkämper Fraunhofer-Institut für f r Produktionstechnik Und Automatisierung (IPA) Stuttgart, Germany Factories of the
More informationA Real Time, Object Oriented Fieldbus Management System
A Real Time, Object Oriented Fieldbus Management System Mr. Ole Cramer Nielsen Managing Director PROCES-DATA Supervisor International P-NET User Organisation Navervej 8 8600 Silkeborg Denmark pd@post4.tele.dk
More informationMobile 2D Barcode/BIM-based Facilities Maintaining Management System
Mobile 2D Barcode/BIM-based Facilities Maintaining Management System Yu-Cheng Lin, Yu-Chih Su, Yen-Pei Chen Department of Civil Engineering, National Taipei University of Technology, No.1.Chung-Hsiao E.
More informationUSAGE OF SELECTIVE LASER MELTING TECHNOLOGY CAPABILITIES IMPLEMENTATION FOR TEETH IMPLANTS METAL CONSTRUCTION IN TU-SOFIA
USAGE OF SELECTIVE LASER MELTING TECHNOLOGY CAPABILITIES IMPLEMENTATION FOR TEETH IMPLANTS METAL CONSTRUCTION IN TU-SOFIA George TODOROV, Nikolay NIKOLOV, Victor MITOV, Yavor SOFRONOV Technical University
More informationProductivity+ Active Editor Pro probe software for machine tools
Productivity+ Active Editor Pro Productivity+ Active Editor Pro probe software for machine tools Enabling enables intelligent machining and green button production processes Flexible for a wide range of
More informationJoint Bachelor Degree in Information Technology
Joint Bachelor Degree in Information Technology Bogdan Logofatu 1, Michael Auer 2 University of Bucharest 1, Carinthia Tech Institute 2 Key words: Life long learning, Information Technology Abstract: This
More informationSchool of Computer Science
School of Computer Science Head of School Professor S Linton Taught Programmes M.Sc. Advanced Computer Science Artificial Intelligence Computing and Information Technology Information Technology Human
More informationLEONI ORION Precision patient positioning system Synchronicity with six degrees of freedom
LEONI ORION Precision patient positioning system Synchronicity with six degrees of freedom sync www. leoni-healthcare.com Synchronicity in benefits Synchronicity of benefits to all stakeholders The treatment
More informationFACULTY OF ENGINEERING AND INFORMATION SCIENCES
FACULTY OF ENGINEERING AND INFORMATION SCIENCES ENGINEERING INFORMATION & COMMUNICATION TECHNOLOGY MATHEMATICS & STATISTICS PHYSICS ENGINEERING Master of Engineering go.uow.edu.au/meng 083844B ENTRY REQUIREMENTS
More informationQUEST The Systems Integration, Process Flow Design and Visualization Solution
Resource Modeling & Simulation DELMIA QUEST The Systems Integration, Process Flow Design and Visualization Solution DELMIA QUEST The Systems Integration, Process Flow Design and Visualization Solution
More informationMaster Program SUSTAINABLE ENGINEERING IN PRODUCTION
Master Program SUSTAINABLE ENGINEERING IN PRODUCTION Sustainable engineering in Production Sustainable development is defined as Meeting the needs of the present without compromising the ability of future
More informationCAD Model Validation in the Product Life Cycle Management
CAD Model Validation in the Product Life Cycle Management CAPVIDIA CEO Tomasz Luniewski BOEING is a trademark of Boeing Management Company. GPDIS_Template_2009.ppt 9/23/2009 1 Company Introduction Founded
More informationFinal Year Projects at itm. Topics 2010/2011
Final Year Projects at itm Topics 2010/2011 Chair of Information Technology in Mechanical Engineering Prof. Dr.-Ing. B. Vogel-Heuser Prof. Dr.-Ing. Frank Schiller Prof. Dr.-Ing. Klaus Bender Technische
More informationInfraStruxure TM Management Software
InfraStruxure TM Management Software End to end data centre infrastructure management software for monitoring and control of power, cooling, security and energy usage from the building through IT systems
More informationVirtual Environments - Basics -
Virtual Environments - Basics - What Is Virtual Reality? A Web-Based Introduction Version 4 Draft 1, September, 1998 Jerry Isdale http://www.isdale.com/jerry/vr/whatisvr.html Virtual Environments allow
More informationFocus on efficiency in Digital Factory
FASTSUITE Edition 2 Focus on efficiency in Digital Factory Bring value to your production with FASTSUITE Edition 2. The new benchmark for Digital Factory solutions closes the gap between engineering and
More informationA Member of the Constructor Group STORAGE SOLUTIONS. Clever Thinking Inside the Box
A Member of the Constructor Group STORAGE SOLUTIONS Clever Thinking Inside the Box Dexion Storage Solutions Thinking Inside the Box Cutting Costs, Reducing Inventory, Saving Space and Saving Time 2 Increasing
More informationMatching the right individual with the right organisation is rooted in a personal relationship with Lishiumeka.
March 2013 Newsletter Lishiumeka Recruitment Services is a specialist engineering, recruitment company focused towards becoming your chosen, long-term, personal recruitment partner. We believe teamwork,
More informationBURG Manufacturing. Competence in die casting.
BURG Manufacturing. Competence in die casting. Take advantage of the know-how of BURG in producing your zinc die cast components. Production service from one source: Development and mould construction
More informationResearch IT Plan. UCD IT Services. Seirbhísí TF UCD
Research IT Plan UCD IT Services Research IT Plan The main goal of this plan is to provide a sustainable and evolving campus Cyberinfrastructure for the UCD research community. We will continue the development
More informationComputer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y
MFGE 404 Computer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 1 - Introduction Dr. Saleh AMAITIK Fall 2005/2006 Production Systems Production
More informationV10.2 / V11.2 Die CAM 3D
CAA V5 based V10.2 / V11.2 Die CAM 3D October, 2011 UNIADEX, Ltd. Die CAM 3D Die CAM 3D/CAM 3D automates and optimizes machining for die product shape. -Various machining operation with with users users
More informationChapter 9 Input/Output Devices
Chapter 9 Input/Output Devices Contents: I. Introduction II. Input Devices a. Keyboard,mouse,joystick,scanners,digital camera, bar code reader, touch Sreeen,Speech input device (microphone) III. Output
More informationHow To Make A Global Cad/Cam Solution For A Large Company
YOUR GLOBAL CAD/CAM PRODUCTION SOLUTION THE INTEGRATED CAD/CAM/ERP SOLUTION A GLOBAL CAD/CAM SOLUTION Missler Software offers a comprehensive, high-performance software application for all types of machining
More informationIndustrial Metrology and Engineering Applications in the Wind Turbine Industry
Industrial Metrology and Engineering Applications in the Wind Turbine Industry 1. Company Introduction M-7 Technologies is a privately owned, ISO 9001 certified company offering engineered solutions for
More informationCOMPUTER INTEGRATED MANUFACTURING
COMPUTER INTEGRATED MANUFACTURING 1. INTRODUCTION: Computer Integrated Manufacturing () encompasses the entire range of product development and manufacturing activities with all the functions being carried
More information2003-2012 MVTec Software GmbH.
1 MVTec Software GmbH is a leading international manufacturer of software for machine vision used in all demanding areas of imaging: semi-conductor industry, web inspection, quality control and inspection
More informationDegree programme in Automation Engineering
Degree programme in Automation Engineering Course descriptions of the courses for exchange students, 2014-2015 Autumn 2014 21727630 Application Programming Students know the basis of systems application
More informationANITEI MIHAI. Adress Sos. Panduri, 90, Bucuresti Phone +031-425.34.45 / +031-425.34.46 Fax +031-425.34.45 E-mail mihai.anitei@unibuc.
Curriculum vitae PERSONAL INFORMATION ANITEI MIHAI Name and surname Adress Sos. Panduri, 90, Bucuresti Phone +031-425.34.45 / +031-425.34.46 Fax +031-425.34.45 E-mail mihai.anitei@unibuc.ro Nationality
More informationProduction Planning Process in a Flexible Manufacturing Cell
ISBN 978-1-84626-xxx-x Proceedings of 2011 International Conference on Optimization of the Robots and Manipulators (OPTIROB 2011) Sinaia, Romania, 26-28 Mai, 2011, pp. xxx-xxx Production Planning Process
More informationA Simple Guide To Understanding 3D Scanning Technologies
A Simple Guide To Understanding 3D Scanning Technologies First Edition www.lmi3d.com Table of Contents Introduction At LMI Technologies, solving complex problems in a simple way is the philosophy that
More information