Product Instructions for: TY-18 Desk

Size: px

Start display at page:

Download "Product Instructions for: TY-18 Desk"

Posy Pitts
7 years ago
Views:

1 Product Instructions for: TY-18 Desk PAGE 1

2 TY-18 Desk Before beginning assembly, separate all parts and carefully study the parts diagrams below. Review all parts and hardware before disposing of any packaging. You may receive extra hardware with your unit. Call Customer Service for missing hardware. Parts List A: Top Panel (1) B: Left Panel (1) C: Right Panel (1) D: Middle Left Panel (1) E: Middle Right Panel (1) F: Front Cross Bar (1) G: Cross Bar (1) H: Base (2) PAGE 2

3 I: Rear Cross Bar (1) J: Right Rear Panel (1) K: Left Rear Panel (1) L: Left Door (1) M: Top Drawer Face Panel (2) N: Top Drawer Left Panel (2) O: Top Drawer Right Panel (2) P: Top Drawer Rear Panel (2) Q: Top Drawer Base (2) R: Center Drawer Face Panel (1) PAGE 3

4 S: Center Drawer Left Panel (1) T: Center Drawer Right Panel (1) U: Center Drawer Rear Panel (1) V: Center Drawer Base (1) W: Middle Drawer Face Panel (1) X: Middle Drawer Left Panel (1) Y: Middle Drawer Right Panel (1) Z: Middle Drawer Rear Panel(1) A1: Middle Drawer Base (1) B1: Lower Drawer Face Panel (1) PAGE 4

5 C1: Lower Drawer Left Panel (1) D1: Lower Drawer Right Panel (1) E1: Lower Drawer Rear Panel (1) F1: Lower Drawer Base (1) 1: Cam Bolt (23) 2: Cam Lock (23) 3: Dowel 5/16 x1-1/4 (22) 4: Bolt 1/4 x1-1/4 (4) 5: Spring Washer 1/16 (4) 6: Flat Washer 1/4 x3/4 (4) PAGE 5

6 7: Allen Wrench (1) 8: Drawer Stop (3) 9: Screw Dia. 1/8 x1/2 L (9) 10: Screw Dia. 1/8 x1-1/4 L (4) 11: Screw Dia. 1/8 x1/2 L (22) 12: Magnet (1) 13: Knob (7) 14: Bolt Dia. 5/32 x3/4 L (7) 15: Cam Bolt (20) 16: Cam Lock (20) 17: Screw Dia. 1/8 x1 L (20) 18: Aluminum Strut (2) PAGE 6

7 TY-18 Desk Assembly Instructions Unpack and lay parts on a clean, padded surface like a carpet or blanket. Check that you have all parts indicated on the front page. Step 1 Slide Front Cross Bar (F) into groove on Middle Panels (D & E) as shown in Figure 1. Figure 1 Step 2 Insert Cam Locks (2) into holes on Front Bars (F & G). Screw Cam Bolts (1) into holes on Panels (B, C, & E). Attach unit from Figure 1 to Panels (B & C) by inserting Cam Bolts (1) and Dowels (3) into corresponding holes until components meet as shown in Figure 2. Tighten Cam Locks (2) by rotating clockwise with Phillips screwdriver (not included). Figure 2 PAGE 7

8 Step 3 Insert Cam Locks (2) into holes on bottom of Panels (B, C, D, & E) as shown in Figure 3. Screw Cam Bolts (1) into holes on Bases (H). Attach unit from Figure 2 to Bases (H) by inserting Cam Bolts (1) and Dowels (3) into corresponding holes until components meet. Tighten Cam Locks (2) by rotating clockwise with Phillips screwdriver (not included). Figure 3 Step 4 Attach Rear Cross Bar (I) to Panels (B & C) using Bolts (4), Spring Washers (5) and Flat Washers (6). Tighten Bolts (4) with Allen Wrench (7). Attach Rear Cross Bar (I) to Panels (D & E) using Screws (10) as shown in Figure 4. Attach Drawer Stop (8) to Front Cross Bar (F) using Screws (9). Figure 4 Tighten Screws (9) with Phillips screwdriver (not included). PAGE 8

9 Step 5 Insert Cam Locks (2) into holes on top of Panels (B, C, D, & E). Screw Cam Bolts (1) into holes on Top Panel (A). Attach Top Panel (A) to unit from Figure 4 by inserting Cam Bolts (1) and Dowel (3) into corresponding holes until components meet. Tighten Cam Locks (2) by rotating clockwise with Phillips screwdriver (not included). Figure 5 Step 6 Attach Rear Panels (J & K) to unit on Figure 6 using Screws (11). Tighten Screws (11) with Phillips screwdriver (not included). Figure 6 PAGE 9

10 Step 7 Attach hinges on Left Door (L) to Left Panel (B) using Screws (9). Attach Magnets (12) to unit from Figure 6 with screws (11). Attach the Knob (13) to the door with Bolts (14). Tighten Screws (9), Screws (11), and Bolts (14) with Phillips screwdriver (not included) Figure 7 Step 8 Insert Cam Locks (16) into holes on Drawer Panels (N & O). Screw Cam Bolts (15) into holes on Face Panel (M). Attach Drawer Panels (N & O) to Face Panel (M) by inserting Cam Bolts (15) into corresponding holes until components meet. Insert Drawer Base (Q) into the grooves on Panels (N, O, & M). Attach Rear Panel (P) to preassembled drawer using Screws (17). Attach Knob (13) to Face Panel (M) using Bolt (14). Figure 8 PAGE 10 Tighten Bolt (14) and Screws (17) with Phillips screwdriver (not included).

11 Step 9 Insert Cam Locks (16) into holes on Drawer Panels (S & T). Screw Cam Bolts (15) into holes on Face Panel (R). Attach Drawer Panels (S & T) to Face Panel (R) by inserting Cam Bolts (15) into corresponding holes until components meet. Insert Drawer Base (V) into grooves on Panels (S, T, & R). Attach Rear Panel (U) to the preassembled drawer using Screws (17). Attach Knobs (13) to Face Panel (R) using Bolts (14). Figure 9 Tighten Bolts (14) and Screws (17) with Phillips screwdriver (not included). Step 10 Insert Cam Locks (16) into holes on Drawer Panels (X & Y). Screw Cam Bolts (15) into holes on Face Panel (W). Attach Drawer Panels (X & Y) to Face Panel (W) by inserting Cam Bolts (15) into corresponding holes until components meet. Insert Drawer Base (A1) into grooves of panels (X, Y, & W). Attach Rear Panel (Z) to preassembled drawer using Screws (17). Attach Knob (13) to Face Panel (W) using Bolts (14). Figure 10 Tighten Bolts (14) and Screws (17) with Phillips screwdriver (not included). PAGE 11

12 Step 11 Insert Cam Locks (16) into holes on Drawer Panels (C1 & D1). Screw Cam Bolts (15) into holes on Face Panel (B1). Attach Drawer Panels (C1 & D1) to Face Panel (B1) by inserting Cam Bolts (15) into corresponding holes until components meet. Insert Drawer Base (F1) into grooves on panels (C1, D1, & B1). Attach Rear Panel (E1) to preassembled drawer using Screws (17). Attach Aluminum Struts (18) to Drawer Panels (C1 & D1) using Bolts (14). Attach Knob (13) to Face Panel (B1) using Bolts (14). Figure 11 Tighten Bolts (14) and Screws (17) with Phillips screwdriver (not included). Step 12 Insert drawers into pre-assembled unit from Figure 7. Figure 12 PAGE 12

13 Step 13 Now your Desk is ready to use! Figure 13 PAGE 13

CK548000TX. Amherst Cocktail Table Trunk. Assembly Instructions PO#: Page 1

CK548000TX. Amherst Cocktail Table Trunk. Assembly Instructions PO#: Page 1 CK548000TX Amherst Cocktail Table Trunk Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seidal.com PO#: Page