BRIDGEPORT XT630 5AX 5 Axis CNC Machining Centers

Transcription

1 MILLING BRIDGEPORT XT630 5AX 5 Axis CNC Machining Centers

2 STANDARD FEATURES 5 Axis CNC Machining Centers The Bridgeport XT630 5AX 5 Axis CNC machining centers are designed for accuracy, speed and productivity. They are built to provide years of dependable machining on parts requiring consistent tolerances, tough to machine materials and fine surface finishes. The XT630 5AX features and robust traveling beam design on an extremely rigid cast iron base. The XT630 5AX has been designed to stand above all other machines in its class. With wide range of options to choose from, this makes the XT630 5AX machine best in class against competitive 5 Axis machining centers worldwide. Higher end features have been designed into the XT630 5AX machines, while streamlining overall cost to provide a very price competitive machine for the higher end market. Included Machine Features 15,000 RPM Direct Coupled Spindle with Oil Chiller & Air/Oil Mist Big Plus CT 40 Spindle 40 Station Swing Arm ATC CNC Control Siemens 840 D SL Coolant Chip Flush System Coolant Wash down Gun-Automatic Auto Central Grease Lubrication A-Axis Rotary Encoder Ball Nut and End Bearing Chiller Leveling Pad and Screw Retention Knobs Work Light Three Color Stack Light CTS Preparation w/deublin Rotary Union Auto Door Magazine Spindle Circular Flushing Scraper Type Conveyor Auto Power Off Options C-Axis Rotary Encoder X/Y/Z Axis Linear Scale Chip Conveyor, Hinge Type (W=500) Coolant through Spindle (280PSI) Mist Collector (1.5Kw, Airflow 33.3m3/min) Renishaw Tool & Part Probe (OMP40-+OTS) Blum Tool & Part Probe (TC 52 + TC S4-20) Dynamic Collision Monitoring 48 Position 40 Taper Tool Magazine 60 Position 40 Taper Tool Magazine Siemens Kinimatic Alignment Software 2

3 MACHINE CONSTRUCTION Machine Structure The honey-comb like reinforced-rib radial and peripheral design provides optimum to weight ratio at minimum weight. The head casting is symmetrically designed about the Y and Z axis plane for proper weight balance and heat distribution of trucks on the Z axis. The machine design incorporates a twin drive system on the A-Axis for higher overall stiffness with minimal for better distribution of cutting forces. Machine Base The base was designed using FEA (Finite Element Analysis) techniques to provide superior machining performance. Highly-rigid base with optimum dynamic stability. The one-piece cast iron base weighs 10,498lbs (4,762kg). 3

4 KEY FEATURES Heavy Duty Linear Guideways, Ballscrews and Axis Drives Heavy duty 1.77 (45mm) for X, Z-axis and (50mm) Y-Axis diameter hardened and ground ball screws for slide movements. Ball screws are driven by powerful direct axis drive servomotors. Heavy duty roller linear guideways are used for all axis motion. X and Y axis guideway size is 1.77 (45mm). Z-axis guideway size is (55mm). Linear guideways allow less friction, less heat and less thermal growth when compared to conventional box way systems. Absolute encoders are utilized on all axis. Large Capacity, fast performance automatic tool changers The standard ATC is fully supported by the column allowing fast, vibration free operation to increase machine accuracy and surface resulting for tool chain movement during machining operations. The ATC cam is driven by an inverter type motor allowing fast, easy tool change recover in the event of a collision or fault. This inverter type motor allows the swing arm to be jogged forward and reverse to easily step through the ATC recovery procedure. A tool position reference sensor in the ATC magazine is used to identify pocket #1 for a fast tool change recovery. Optional 48 or 60 capacity tool chains are also available. Advanced digital control to unleash your productivity The XT630 5AX machine features the latest Siemens 840D control. The control panel is custom-designed to be user friendly especially in the placement of the buttons and identifying nomenclature. The control module conveniently swings for better user access. Large 19 color LCD display screen aids in viewing the various programming and function pages. Standard ISO-40 Dual Contact BIG-PLUS Taper Spindle Configuration ISO-40 V flange Dual Contact taper spindle with a fully enclosed hardened and precision ground, pre-loaded ball bearing design. A taper air blast system is utilized to minimize spindle contamination during tool changes. Additionally, a labyrinth seal and low pressure air purge and labyrinth seal keep coolant out of the spindle bearings. CAT-V-40 flange tooling is available from Hardinge. ISO-40 Dual Contact Taper Spindle Configuration The Dual Contact Taper spindle design is also known as BIG- PLUS. This design allows simultaneous face and taper contact when the tool is clamped in the spindle. This system provides a stiffer interface between the spindle and the tool holder along with minimizing run out on extended tool and better overall rigidity. The working principle of the BIG-PLUS (BCV/ BBT) spindle, with a dual contact type tool holder, is that before clamping, the tool holder taper and spindle taper are in contact with each other to establish a good taper fit, however face contact has not occurred. When the machine s spindle draw bar is activated, the tool holder is pulled into the machine s spindle which expands by elastic deformation until the faces of the spindle and the tool holder contact each other. This completes the simultaneous fit of the tool holder taper and flange to the spindle taper and face. Rotary Trunnion Table The XT630 5AX features a 24.8 (630mm) rotary trunnion table which incorporates the A and C-Axis with minimal backlash. The A-Axis is the tilting axis with a programmable range of -30 to 120 degrees while the C-Axis rotation is continuous. Eight T-slots provide increased flexibility for workholding devices. The maximum table weight is 771lbs. (350kg) when centered on the table. 4

5 CONTROL POWER & TORQUE CHARTS General Overview Siemens 840D SL Control 19 TFT LCD display with Innovative capacitive sensor technology Programmable Resolution.0001 /.001mm Inch/Metric Data Selection by G-Code MDI (Manual Data Input) Operation ShopMill 3D Simulation SINUMERIK Operate Animated element operation Easy Tool Management Measurement cycles Transmit and peripheral surface transformation CYCLE800 MDynamics Advanced Surface Ethernet interface (Data Transfer Capability) FTP Part Program Storage/Data input/output on: 10 MB CNC memory 6 GB internal Compact Flash USB 2.0 Network Drive Siemens Motorized 18,000 RPM Spindle Motor Siemens DDS 15,000 RPM Spindle Motor 5

6 FLOOR PLANS HIGE TYPE CONVEYOR HIGE TYPE CONVEYOR SCRAPER TYPE CONVEYOR SCRAPER TYPE CONVEYOR SCRAPER TYPE CONVEYOR HIGE TYPE CONVEYOR 6

7 SPECIFICATIONS Axis Travel Saddle (X-axis) Beam (Y-axis) Head (Z-axis) 30 (762mm) 24.8 (630mm) 24 (610mm) A-Axis (tilt) +30 ~-120 C-Axis (rotary) Max Swing diameter Positioning X, Y, Z-Axis Positioning, Full Travel (ISO 230-2) (with scale) X, Y, Z-Axis Repeatability (ISO 230-2) (with scale) X, Y, Z-Axis Positioning, Full Travel (ISO 230-2) (without scale) X, Y, Z-Axis Repeatability (ISO 230-2) (without scale) A-Axis Positioning (Arc sec) with Scale 10 C-Axis Positioning (Arc sec) with Scale 10 A-Axis Repeatability (Arc sec) with Scale 4 C-Axis Repeatability (Arc sec) with Scale 4 C-Axis Positioning (Arc sec) without Scale C-Axis Repeatability (Arc sec) without Scale Spindle Spindle Speed Range Direct Coupled Spindle Motor HP Rating (S1/S6-40%) Max Torque at Motor Base Speed (S6-40%) 360 (continuous) 35.4 (900mm) in (0.006mm) in (0.003mm) in (0.01mm) in (0.004mm) ,000 RPM Spindle Taper No. 40 Tool Holder ISO 40 Worktable Rotary Table Diameter Table load Number of T-Slots 8 T-Slot Size 17.4/26.2 (19.5Kw/26 HP) 88.5Nm/453 RPM 24.8 (630mm) 771 lbs. (350kg).551 (14mm) Automatic Tool Changer Taper Type Tool Type Tool Selection Tool Capacity Max. Tool Diameter (Full Drum) Max. Tool Diameter (Adj. Pockets Empty) Max. Tool Length Max. Tool Weight Tool Change Time (T-T) Tool Change Time (C-C) ISO Coolant Coolant tank capacity Wash down Wash gun Stainless chip pan Machine Size Height Length Depth Machine weight Service Requirements * Note: Other voltages require an external transformer US gallons Standard Standard Standard Power Requirements* (FLA/Volts/Phase) 57/40/3 Air Requirements (L/min) NO.40 Swing Arm BT / CAT / ISO / HSK-A63 Bi-directional 40 Tools (Opt 48 / 60 Tools) 3.1 (80mm) 4.9 (125mm) 11.8 (300mm) 17.6 lbs (8kg) < 2 sec < 5 sec 140 (3536mm) 102 (2572mm) 182 (4623mm) 32,187 lbs (14600kg) 6 kg/cm2 7

8 Wuhan, Beijing, Shenyang, Elgin, Illinois Traverse City, Michigan Leicester, England Noisy-Le-Sec, France Krefeld, Germany Erkrath, Germany St. Gallen, Switzerland Hyderabad, India Xian, Shanghai, HARDINGE COMPANIES WORLDWIDE Elmira, New York Bron, France Biel, Switzerland Chongqing, Guangzhou, Nan Tou, Taiwan Jiaxing, Over the years, The Hardinge Group steadily diversified both its product offerings and operations. Today, the company has grown into a globally diversified player with manufacturing operations in North America, Europe and Asia. In addition to designing and building turning centers, and collets, Hardinge is a world leader in grinding solutions with the addition of the Kellenberger, Jones & Shipman, Hauser, Tschudin, Usach and Voumard brands to the Hardinge family. The company also designs and manufactures Bridgeport machining centers and other industrial products for a wide range of material cutting, turnkey automation and workholding needs. Expect more from your Hardinge products. Choose Hardinge precision and reliability for increased productivity and value! Call us today, we ve got your answer. North America Hardinge Inc. General Information: Sales Fax: Workholding Fax: Service: Canada Canadian Hardinge Machine Tools Ltd. Tel: Fax: Hardinge Machine (Shanghai) Co. Ltd. Hardinge Limited Tel: Fax: Hardinge Precision Machinery (Jiaxing) Co., Ltd. Economic and Technology Development Zone Tel: Fax: Germany Hardinge GmbH Tel: (49) Fax: (49) Taiwan Hardinge Machine Tools B.V. Tel: Fax: cs@hardinge.com.tw Switzerland L. Kellenberger & Co. AG Tel: +41 (0) Fax: +41 (0) info@kellenberger.com L. Kellenberger & Co. AG Tel: +41 (0) Fax: +41 (0) info@kellenberger.com United Kingdom Jones & Shipman Hardinge Tel: +44 (0) Fax: +44 (0) info@jonesshipman.com All specifications subject to change without notice. All marks indicated by and are trademarks of their respective owners. #1513B Litho in USA Hardinge Inc August