1st February ASSA 2013 price list. Effective from 1st February 2013 (Version 1) ASSA ABLOY, the global leader in door opening solutions

Transcription

1 1st February 2013 ASSA 2013 price list Effective from 1st February 2013 (Version 1) ASSA ABLOY, the global leader in door opening solutions

2 ASSA PRICE LIST FEBRUARY 2013 TABLE OF CONTENTS 1 SECTION A: CYLINDERS & KEYS A4 SECTION F: DOOR CONTROLS F48 SECTION B: LOCKSETS B19 SECTION G: PANIC HARDWARE G52 SECTION C: ACCESSORIES C26 SECTION H: HINGES H57 SECTION D: HANDLES D36 SECTION I: ELECTRIC LOCKING I59 SECTION E: S/STEEL FURNITURE E41 CONDITIONS OF TRADING 72 ALPHABETICAL INDEX Accessories Section C,E Cassette, Key A18 Accessory Set, Blind Roses C27, E41, E46 Chain for Emergency Accessories C28 Accessory Set, Cylinder C26, E41, E46 Classic Handles D36 Accessory Set, Disabled C26 Cleaner/De-icer A18 Accessory Set, Emergency C28 CLIQ Cylinders A12-A16 Accessory Set, Escutcheons C27, E41, E46 Clutch Thumbturn D39 Accessory Set, Toilet C27, E42, E46 Codelocks I70 Adjustment Disc, Hinges H58 Codoor I70 Aluminium Furniture D37, D38 Codoor Battery I70 Anti-Bacterial Furniture D36, D38 Compact 3000 Locks B20 Anti-Drill Plate, Compact C33 Concealed Fixing for Handle D36 Anti-Drill Plate, Modular & Connect C34 Connect Mechanical Locks B19, B23-B24 Anti-Vandal Screw C32, D40 Connect Motorised & Solenoid Handle I66 ASSA 5 pin Cylinders A4 Cover Case C34 ASSA 4800 Cylinders A8 Cupboard Lock (ASSA) B25 ASSA 1900PE Panic Hardware G55 Cylinder Accessory Set C26, E41, E46 ASSA 22CL Codelock I70 Cylinder Plate (Narrow Profile) C26, C29, C30, I66 ASSA Door Closers F48 Cylinder Rim Lock B25 ASSA ABLOY Door Closers F48, F49 Cylinder Ring C30, E46 ASSA CLIQ Electromechanical Cylinders A12-A16 Cylinder Screw A17 ASSA dp Mechanical Cylinders A12, A13, A14 Cylinder Sleeve A18 ASSA Flexcore Plus Cylinders A4 Cylinders Section A ASSA max CLIQ A16 ASSA P600 Cylinders A6 Deadbolt Switch I71 ASSA Twin Combi 5800 Cylinders A10 Deadknob D39 ASSA Scandinavian Oval Cylinders A4, A6, A8, A10, Deadlock, Compact B20 A12 Deadlock, Euro B21 ASSA Scandinavian Round Cylinders A6, A8, A10, A12 Deadlock, Modular & Connect B22, B24 ASSURE Panic Hardware G52, G53, G54 Deadlock, Rim B25 Deadlock, Small-Case B25 Backplate, Levers Section E Barrel see Cylinder Deadlocking Nightlatch see Nightlatch Bathroom Lock see Toilet Lock Decorative Long Plate C29 Battery, Lithium 9V I70 Disabled Thumbturn C31 Battery backup (12v 7AH) I71 Disabled Thumbturn Accessory Set C26 Blank Plate (Narrow Profile) C26, C29, I66 Disc for Hinges H58 Blind Rose C29 Distance Ring A18 Blind Rose Accessory Set C27, E41, E46 Distinction Handles D36 Blocking Key see Faceplate Dome, Emergency Lock C28 Key Door Closers Section F Blocking Lock, complete A5, A7, A9, A11 Door Stops D37, E47 A14 Double Nightlatch B22-B24 Bolt Position Monitor I71 Door Releases Section I Breakpin C28 dp Cylinders A12, A13, A14 Brighthandle D38 Drawer Lock (Ruko) B25 British Oval Shape see Oval Profile Drug Cupboard Lock B25 Cabinet Lock Cam Motion Closers Cam Lock B25, I65 F48, F49, F50 A5, A7, A9, A11 A12

3 ASSA PRICE LIST FEBRUARY ALPHABETICAL INDEX cont'd Electric Locking Section I Key, ASSA 4800 A9 Electric Cabinet Locks I65 Key, ASSA CLIQ A15 Electromechanical Cylinders & Keys A12-A16 Key, ASSA dp A13 Electromechanical Free Swing Closers F48, F50 Key, ASSA Flexcore Plus A5 Electric Strike, High Security I59 Key, ASSA P600 A7 Electric Strike, Medium Security I61 Key, ASSA Twin Combi 5800 A11 Electric Strike, Universal I60 Keybank for Windows A17 Electric Strike for Deadbolts I62 Keypad Entry System I70 Electric Strikes for Hookbolts I62 Keyswitch A5, A7, A9, A11 Electromagnets, Accessories I64 A14 Emergency Accessory BS EN 179 Sets C28, G56 Knob, Dead D39 Emergency Accessories C28 Emergency Door Stop F51 Latch B19-B24 Escape Deadlock B20, C28 Latchbolt Switch I71 Escutcheon Set, Euro profile C27, E41, E46 Leaf, Hinge H57 Escutcheon, Lever Locks C29 Lever Lock B25 Euro Mortice Lock B21 Lift-Off Hinge H57, H58 Euro Electric Strikes I63 Lockcase Section B Euro Profile Cylinders A4, A6, A8, A9 Locking Latch B23 A12-A13 Lockset Section B Exit Switch I71 Lockset, ASSA Narrow Profile B21 Extension Piece, ASSA Scandinavian Oval Cylinders A18 Lockset, Cabinet B25 Extension Piece, ASSA Scandinavian Round CylinderA18 Lockset, Compact B20, C26 Lockset, Connect B19, B20, B23, B24 Faceplate, Compact C33 Lockset, Cupboard B25 Faceplate, Modular, ASA/ANSI C31 Lockset, Cylinder Rim B25 Faceplate Key C34 Lockset, Drawer B25 Finger Guard Protection D37 Lockset, Lever B25 Fire Door Hold Open Systems F48, F50 Lockset, Modular B19, B22, B23 Fire Relay for Power Supplies I71 Lockset, Small Case B25 Fixing Screw, Euro/Oval Cylinders A17 Lockset, Triple Latching B23 Fixing Tool for Anti-Vandal Screws C32, D40 Lockspray A18 Flexcore Plus Cylinders A4 Lock Shield for Modular & Connect C34 Flip-Up Handle Follower D40 Lubricant See Lockspray Flip-Up Handle Set C27 Floor Springs & Accessories F50-F51 Machine Screws E44, E47 Floor Stops D37, E47 Master Key see Key Follower for Thumbturn C31 Magnets & Accessories See Electromagnets Forend see Faceplate Medium Security Electric Strike I61 Modular Locks B19, B22, B23 Gate Lock and Accessories B20, C26 Mortice Cylinder (Round) see Round Green Dome see Dome, Threaded Cylinder Emergency Lock Multipoint Locks B20, G53, G55 Half Set of Handle C28, D36 Handle Section D, E Narrow Profile Accessory Sets C26, C29, I64 Handle Follower D40 Narrow Profile Handle C26, C29 Handle Follower, Flip-Up D40 Narrow Profile High Security Accs Sets C29 Handle Screw D40 Narrow Profile Lock, ASSA B21 Handle with Backplate Section E Nightlatch, Compact B20 High Security Electric Strike I59 Nightlatch, Connect, Electromech. B24, I66 High Security Accessory Sets Connect 35mm C29, I66 Nightlatch, Cupboard B25 High Security Striking Plates C35, I66 Nightlatch, Modular B22-B23 Hinge Section H Nightlatch, Narrow Profile B21 Hinge Adjustment Disc H58 Nightlatch, Rim B25 Hinge Screws H58 Nightlatch, Small Case B25 Hold Open Devices I65 Nipples C32, D40 Hookbolt Lock, narrow profile B21 Nut Plate with Nuts A18 Hookbolt Lock B22 One-Way Screw C32, D40 Journal-Supported Hinge H57, H58 Offline Classic, Smartair see Smartair Oval Profile Cylinder A4, A6, A8, A10, A12 Keep see Striking PlateOval Thumbturn Accessory Set C26, I66 Key Cassette A18 Key for Faceplate see Faceplate Key Key, ASSA 5-Pin A5

4 ASSA PRICE LIST FEBRUARY 2013 ALPHABETICAL INDEX cont'd 3 Padlock - ASSA 5-Pin A5 Spindle D40, E43, E47 Padlock - ASSA 4800 A9 Spindle, Thumbturn see Turn Padlock - ASSA dp A14 Follower Padlock - ASSA Flexcore Plus A5 Spindle, Split D40, E43, E47 Padlock - ASSA P600 A7 Split Follower Lock B19, B21-B24 Padlock - ASSA Twin Combi 5800 A11 Split Spindle D40, E43, E47 Panic Hardware Section G Spray see lockspray Performer software A15 Spring cassette - handle reinforcer I66 Pivot Sets F51 Standalone Smartair see Smartair Plastic Dome C28 Stainless Steel Door Furniture Section E PSU (Power Supply Unit) I71 Stainless Steel Lever Handles E41, E45 Proximity Card Readers see Smartair Stainless Steel Pull Handles E44, E45 Pull Handle E44, E45 Striking Plate, Compact C33 Rack & Pinion Closers F48, F49, F50 Striking Plate, Electric Section I Rebate Kit, Compact C33 Striking Plate, Modular & Connect C35 Rebate Kit, Modular, Connect C34 Striking Plate, Non-Modular C35 Rectifier, 98K I60 Striking Plate, Security C35 Release, Electric Section I Striking Plate, Rollerbolt C35 Retrofitting Electric Strikes I61 Rim Cover Case C34 Thumbturn Accessory Set C26, E41, E46, I66 Rim Cylinder Lockset B25 Thumbturn Follower C31 Rim Cylinder Sleeve A18 Thumbturn Plate, Narrow Profile C31 Rim Cylinder, ASSA Scandinavian Oval Shape A4, A6, A8, A10, Thumbturn, Thumbturn adapter C31, I66 A12 Toilet Accessory Sets C27, E42, E46 Rim Cylinder, Round A4, A6, A8, A10, Toilet Lock B19-B21 A12 Toilet Lock Indicator Sets C27, E42, E46 Round Threaded Cylinder A4, A6, A8, A10, Transformers see PSU A12 Triple Latching Locksets B23 Turn Screw C32 Sash Lock, Compact B20 Twin Combi 5800 Cylinders A10 Sash Lock, Connect B24 Sash Lock, Euro B21 UK Oval Shape see Oval Profile Sash Lock, Lever B25 Update on Card (UOC), Smartair see Smartair Sash Lock, Modular B22 Satin Anodised Aluminium Furniture D37, D38 Scandinavian Oval Shape see ASSA Scand. Washer, for fixing external cylinders A18 Oval Wireless, Smartair see Smartair Scandinavian Round Shape see ASSA Scan Woodscrews for Hinges H58 Round Woodscrews for Ruko Line backplates E43 Screw for Handle D40 Screw, Anti-Vandal C32, D40 Screw, Cylinder A17 Screw, One-Way C32 Screw, Profile cylinders A17 Screw, Round Rim Cylinders A17 Screw, Security see Screw, Anti-Vandal Screw, Turn C32 Screw, Wood (For Hinges) H58 Screw-In Cylinder see Round Threaded Cylinder Security Plates C29 Security Screw see Screw, Anti-Vandal Security Striking Plates, Modular C35, I66 Serial Motor Lock I66 Signage E47 Sleeve, Rim Cylinder A18 Small Case Lock B25 Smartair - UOC Offline Wireless & Standalone I67-I69 Snoopy see Deadbolt switch Solenoid Handle Lock I66 Spacer Ring A18, C31

5 A CYLINDERS - ASSA 5 PIN & ASSA FLEXCORE PLUS 4 Catalogue Ref ASSA 5 Pin ASSA Flexcore Plus Cylinder Description Std Differ* M/Keyed Type Std Differ M/Keyed Steps 2-4 Steps 2-4 with 2 keys with 2 keys with 2 keys with 2 keys ASSA SCANDINAVIAN OVAL R501 / FP501 Single cylinder (External) R502 / FP502 Double cylinder R503 / FP503 Single cylinder (Internal) R507 / FP507 Rim Single cylinder & sleeve (External) R3507 / FP3507 Rim Single cylinder & sleeve (Internal) R13507 / FP13507 Rim Double cylinder & sleeve UK OVAL PROFILE R533 / FP533 Single cylinder (40mm/45mm) R532 / FP532 Double cylinder (61mm/71mm) R531 / FP531 Cylinder & Large turn (61mm/71mm) R534 / FP534 Cylinder & Small turn (61mm/71mm) R537 / FP537 Cylinder & Oval turn (61mm/71mm) NOTE: Oval profile cylinders are also available in mm (double cylinders) and +10mm (single cylinder) lengths only EURO PROFILE R523 / FP523 Single cylinder (40mm/45mm) R522 / FP522 Double cylinder (61mm/71mm) R521 / FP521 Cylinder & Large turn (61mm/71mm) R524 / FP524 Cylinder & Small turn (61mm/71mm) R527 / FP527 Cylinder & Oval turn (61mm/71mm) NOTE: Other Euro profile cylinder lengths are available by special order. Contact your stockist for details. ROUND THREADED R551 / FP551 Mortice single cylinder R552 / FP552 Mortice double cylinder R557 / FP557 Rim cylinder Rim cylinders are supplied with 2 fixing screws and a 5mm spacer ring (not included with mortice cylinders). All prices are for finish 13 (Satin Chrome). ADDITION FOR SPECIAL FUNCTIONS ON EURO/UK OVAL TURN CYLINDERS A1 (Classroom Function - Clockwise Handing) B1 (Classroom Function - Anti-Clockwise Handing) C1 (Clutch Function) Classroom Function Handing - Anti-Clockwise suits Right Hand Outward Opening Door and Left Hand Inward Opening Door Classroom Function Handing - Clockwise suits Left Hand Outward Opening Door and Right Hand Inward Opening Door ADDITION FOR SPECIAL FUNCTION ON EURO/UK OVAL DOUBLE CYLINDERS DA1 (Dual Action Function) Allows external access regardless of key position internally ADDITION FOR DIFFERENT FINISH Single and rim cylinders 20 (Polished Brass) Double cylinders and cylinders with turns 20 (Polished Brass) *ASSA FLEXCORE PLUS STANDARD DIFFER PRICES ABOVE INCORPORATE A BUMP RESISTANT FEATURE AVAILABLE ON STEP 2 ONLY - PLEASE ENSURE THAT 'H' IS STATED TO ENSURE THIS FEATURE IS INCLUDED

6

7 A CYLINDERS - ASSA P600 6 Catalogue Ref ASSA P600 Cylinder Description Std Differ M/Keyed Type Step 4 Step 4 with 2 keys with 2 keys ASSA SCANDINAVIAN OVAL P601 Single cylinder (External) P602 Double cylinder P603 Single cylinder (Internal) P607 Rim Single cylinder & sleeve (External) P3607 Rim Single cylinder & sleeve (Internal) P13607 Rim Double cylinder & sleeve ASSA SCANDINAVIAN ROUND P611 Single cylinder (External) P612 Double cylinder P613 Single cylinder (Internal) UK OVAL PROFILE P633 Single cylinder (40mm/45mm) P632 Double cylinder (61mm/71mm) P631 Cylinder & Large turn (61mm/71mm) P634 Cylinder & Small turn (61mm/71mm) P637 Cylinder & Oval turn (61mm/71mm) NOTE: Oval profile cylinders are also available in mm (double cylinders) and +10mm (single cylinder) lengths only EURO PROFILE P623 Single cylinder (40mm/45mm) P622 Double cylinder (61mm/71mm) P621 Cylinder & Large turn (61mm/71mm) P624 Cylinder & Small turn (61mm/71mm) P627 Cylinder & Oval turn (61mm/71mm) NOTE: Other Euro profile cylinder lengths are available by special order. Contact your stockist for details. ROUND THREADED P651 Mortice single cylinder P652 Mortice double cylinder P657 Rim cylinder Rim cylinders are supplied with 2 fixing screws and a 5mm spacer ring (not included with mortice cylinders). All prices are for finish 13 (Satin Chrome). ADDITION FOR SPECIAL FUNCTIONS ON EURO/UK OVAL TURN CYLINDERS A1 (Classroom Function - Clockwise Handing) B1 (Classroom Function - Anti-Clockwise Handing) C1 (Clutch Function) Classroom Function Handing - Anti-Clockwise suits Right Hand Outward Opening Door and Left Hand Inward Opening Door Classroom Function Handing - Clockwise suits Left Hand Outward Opening Door and Right Hand Inward Opening Door ADDITION FOR SPECIAL FUNCTION ON EURO/UK OVAL DOUBLE CYLINDERS DA1 (Dual Action Function) Allows external access regardless of key position internally ADDITION FOR DIFFERENT FINISH Single and rim cylinders 20 (Polished Brass) Double cylinders and cylinders with turns 20 (Polished Brass)

8

9 A CYLINDERS - ASSA Catalogue Ref ASSA 4800 Cylinder Description Std Differ M/Keyed Type Steps 2-3 Steps 2-3 with 2 keys without keys ASSA SCANDINAVIAN OVAL 4801 Single cylinder (External) Double cylinder Single cylinder (Internal) Rim Single cylinder & sleeve (External) Rim Single cylinder & sleeve (Internal) Rim Double cylinder & sleeve ASSA SCANDINAVIAN ROUND 4811 Single cylinder (External) Double cylinder Single cylinder (Internal) UK OVAL PROFILE 4833 Single cylinder (40mm/45mm) Double cylinder (61mm/71mm) Cylinder & Large turn (61mm/71mm) Cylinder & Small turn (61mm/71mm) Cylinder & Oval turn (61mm/71mm) NOTE: Oval profile cylinders are also available in mm (double cylinders) and +10mm (single cylinder) lengths only EURO PROFILE 4823 Single cylinder (40mm/45mm) Double cylinder (61mm/71mm) Cylinder & Large turn (61mm/71mm) Cylinder & Small turn (61mm/71mm) Cylinder & Oval turn (61mm/71mm) NOTE: Other Euro profile cylinder lengths are available by special order. Contact your stockist for details. ROUND THREADED 4851 Mortice single cylinder Mortice double cylinder Rim cylinder Rim cylinders are supplied with 2 fixing screws and a 5mm spacer ring (not included with mortice cylinders). All prices are for finish 13 (Satin Chrome). ADDITION FOR SPECIAL FUNCTIONS ON EURO/UK OVAL TURN CYLINDERS A1 (Classroom Function - Clockwise Handing) B1 (Classroom Function - Anti-Clockwise Handing) C1 (Clutch Function) Classroom Function Handing - Anti-Clockwise suits Right Hand Outward Opening Door and Left Hand Inward Opening Door Classroom Function Handing - Clockwise suits Left Hand Outward Opening Door and Right Hand Inward Opening Door ADDITION FOR SPECIAL FUNCTION ON EURO/UK OVAL DOUBLE CYLINDERS DA1 (Dual Action Function) Allows external access regardless of key position internally ADDITION FOR DIFFERENT FINISH Single and rim cylinders 20 (Polished Brass) Double cylinders and cylinders with turns 20 (Polished Brass) (Polished Brass)

10

11 A CYLINDERS - ASSA TWIN COMBI Catalogue Ref Twin Combi 5800 Cylinder Description Std Differ M/Keyed Type Steps 3-4 Steps 3-4 with 2 keys without keys ASSA SCANDINAVIAN OVAL C5801 Single cylinder (External) C5802 Double cylinder C5803 Single cylinder (Internal) C5807 Rim Single cylinder & sleeve (External) C35807 Rim Single cylinder & sleeve (Internal) C Rim Double cylinder & sleeve ASSA SCANDINAVIAN ROUND C5811 Single cylinder (External) C5812 Double cylinder C5813 Single cylinder (Internal) UK OVAL PROFILE C5833 Single cylinder (40mm/45mm) C5832 Double cylinder (61mm/71mm) C5831 Cylinder & Large turn (61mm/71mm) C5834 Cylinder & Small turn (61mm/71mm) C5837 Cylinder & Oval turn (61mm/71mm) NOTE: Oval profile cylinders are also available in mm (double cylinders) and +10mm (single cylinder) lengths only EURO PROFILE C5823 Single cylinder (40mm/45mm) C5822 Double cylinder (61mm/71mm) C5821 Cylinder & Large turn (61mm/71mm) C5824 Cylinder & Small turn (61mm/71mm) C5827 Cylinder & Oval turn (61mm/71mm) NOTE: Other Euro profile cylinder lengths are available by special order. Contact your stockist for details. ROUND THREADED C5851 Mortice single cylinder C5852 Mortice double cylinder C5857 Rim cylinder Rim cylinders are supplied with 2 fixing screws and a 5mm spacer ring (not included with mortice cylinders). All prices are for finish 13 (Satin Chrome). ADDITION FOR SPECIAL FUNCTIONS ON EURO/UK OVAL TURN CYLINDERS A1 (Classroom Function - Clockwise Handing) B1 (Classroom Function - Anti-Clockwise Handing) C1 (Clutch Function) Classroom Function Handing - Anti-Clockwise suits Right Hand Outward Opening Door and Left Hand Inward Opening Door Classroom Function Handing - Clockwise suits Left Hand Outward Opening Door and Right Hand Inward Opening Door ADDITION FOR SPECIAL FUNCTION ON EURO/UK OVAL DOUBLE CYLINDERS DA1 (Dual Action Function) Allows external access regardless of key position internally ADDITION FOR DIFFERENT FINISH Single and rim cylinders 20 (Polished Brass) Double cylinders and cylinders with turns 20 (Polished Brass) NOTE: Servicing of existing Twin Combi 5800 suites on Step 2, please use pricing as above

12

13 A dp MECHANICAL CYLINDERS 12 Catalogue Ref Cylinder Description Series Series Type M/Keyed M/Keyed without keys without keys ASSA SCANDINAVIAN OVAL 2401/4401 Single cylinder (External) /4402 Double cylinder /4403 Single cylinder (Internal) /4407 Rim Single cylinder & sleeve (External) /4409 Rim Single cylinder & sleeve (Internal) /4408 Rim Double cylinder & sleeve ASSA SCANDINAVIAN ROUND 4411 Single cylinder (External) n/a Double cylinder n/a Single cylinder (Internal) n/a UK OVAL PROFILE 2433/4433 Single cylinder (A:40mm/B:45mm) /4432 Double cylinder (AA:61mm/BB:71mm) /4434 Cylinder & Small turn (AA:61mm/BB:71mm) /4437 Cylinder & Oval turn (AA:61mm/BB:71mm) NOTE: Oval profile cylinders are also available in mm (double cylinders) and +10mm (single cylinder) lengths. NOTE: CLIQ function not available on Oval profile EURO PROFILE 2423/4423 Single cylinder (A:40mm/B:45mm) /4422 Double cylinder (AA:61mm/BB:71mm) /4424 Cylinder & Small turn (AA:61mm/BB:71mm) /4427 Cylinder & Oval turn (AA:61mm/BB:71mm) NOTE: CLIQ function available on the M20 High Security version only NOTE: Special Functions are not available on the M20 High Security version NOTE: Other Euro profile cylinder lengths are available by special order. Contact your stockist for details. ADDITION FOR SPECIAL FUNCTIONS ON EURO/UK OVAL TURN CYLINDERS A1 (Classroom Function - Clockwise Handing) B1 (Classroom Function - Anti-Clockwise Handing) C1 (Clutch Function) Classroom Function Handing - Anti-Clockwise suits Right Hand Outward Opening Door and Left Hand Inward Opening Door Classroom Function Handing - Clockwise suits Left Hand Outward Opening Door and Right Hand Inward Opening Door ADDITION FOR SPECIAL FUNCTION ON EURO/UK OVAL DOUBLE CYLINDERS DA1 (Dual Action Function) Allows external access regardless of key position internally All prices shown are for finish 13 (Satin Chrome). All ASSA dp Mechanical Series and CLIQ Electronic Series are master keyed cylinders supplied without keys. ADDITION FOR DIFFERENT FINISH Single and rim cylinders 20 (Polished Brass) Double cylinders and cylinders with turns 20 (Polished Brass)

14

15 A dp MECHANICAL CYLINDERS 14 Catalogue Ref Cylinder Description Series Series Type M/Keyed M/Keyed without keys without keys PADLOCKS 24241/44241 Key locking /44243 Extended shackle / mm diameter shackle / mm dia. Extended shackle /44249 Close shackle /44341 Key locking n/a /44349 Close shackle n/a /44441 Key locking n/a /44549 Close shackle n/a /14430 Blocking lock NOTE: Padlocks are only available in finish 18 (Black Chrome). Blocking Lock only available in finish 57 (Bright Zinc) / / / / Padlocks - only available on a dp Master Key System only / Padlocks - only available on dp CLIQ Master Key System CAM LOCK 2471/4471 Cam lock n/a NOTE: Cam locks are in finish 11 (Polished chrome) KEYSWITCH 2451K/4451K Above price does not include optional locking ring LOCKING RING

16 STEP 1 STEP 2 STEP 3 dp CLIQ User keys required. If keys are required after the system has been

17 A CLIQ - ELECTROMECHANICAL CYLINDERS 16 Catalogue Ref Cylinder Description M/Keyed Type without keys ASSA max CLIQ - STANDALONE CLIQ ASSA max CLIQ - Single ASSA Scandinavian External Oval cylinder Kit ASSA max CLIQ - Double Euro Profile Cylinder Kit (size is a = 40/30) NB: This cylinder kit includes as standard the M20 high security snap resistance ASSA max CLIQ - Single ASSA Scandinavian External Round Cylinder Kit All kits are supplied with 1 programming key, 3 CLIQ User keys and instruction manual NB: ASSA max CLIQ is suitable for small standalone sites of 3 cylinders and up to 15 CLIQ User Keys Additional ASSA max User Keys ASSA max CLIQ User Key, per key (Only max CLIQ element) For ASSA max CLIQ User Keys, please use price above + dp additional key Additional ASSA max Cylinders ASSA Scandinavian External Oval Cylinder, BB4401 ASSA Double Euro Profile Cylinder, BB4422 ASSA Scandinavian External Round Cylinder, BB4411 P.O.A P.O.A P.O.A All prices shown are for finish 13 (Satin Chrome). Additional cylinder types available upon request

18

19 A MISCELLANEOUS CYLINDER ACCESSORIES 18 Catalogue Ref Accessory Description Units Price Type Per Box Per Unit CYLINDER FIXING PLATES Washer (for fixing external cylinders) Nut plates with nuts (for fixing internal cylinders) KEY CASSETTES Key cassette EXTENSION PIECES mm Oval extension piece mm Oval extension piece mm Oval extension piece mm Oval extension piece mm Round extension piece DISTANCE RINGS (FOR ASSA SCANDINAVIAN OVAL RIM CYLINDERS) mm Distance ring mm Distance ring mm Distance ring mm Distance ring mm Distance ring mm Distance ring mm Distance ring All prices are for finish 13 (Satin Chrome) - OTHER FINISHES: Not Available RIM CYLINDER SLEEVES (FOR ASSA SCANDINAVIAN OVAL CYLINDERS) Cylinder sleeve Cylinder sleeve All prices are for finish 13 (Satin Chrome) - OTHER FINISHES: Finish 20 (Polished Brass) available at no extra cost. SPACER RINGS (FOR ROUND THREADED CYLINDERS) mm Spacer ring mm Spacer ring mm Spacer ring All prices are for finish 13 (Satin Chrome) - OTHER FINISHES: Finish 20 (Polished Brass) available at no extra cost. ASSA LOCKSPRAYS ASSA Lockspray - Lubricant ASSA Cleaner/De-Icer

20 COMPLETE BATHROOM LOCKS B Catalogue Ref 19 SMALL CASE LOCK Lock Backset Component lockcase & accessories Price Type mm 2020T & All prices are for the following finishes: LOCKSET: finish 92 (Gold Epoxy) ACCESSORIES: finish 13 (Satin Chrome) Lockcase, toilet accessory set and handles to be ordered separately ADDITION FOR DIFFERENT FINISH (ACCESSORIES ONLY) 20 (Polished Brass) COMPACT LOCK Lock Backset Component lockcase & toilet accessories Price Type mm 3055T T & All prices are for finish 13 (Satin Chrome). Lockcase, toilet accessory set and handles to be ordered separately ADDITION FOR DIFFERENT FINISH (ACCESSORIES ONLY) 20 (Polished Brass) MODULAR LOCKS & CONNECT LOCKS Lock Backset Component lockcase & toilet accessories Price Type mm 565T** & & 265 standard finish satin chrome (13) T** & & 265 standard finish bright zinc Lock (57) ** Specification reference only - lockcase, toilet accessory set and handles to be ordered separately ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Modular Only MODULAR LOCK & CONNECT LOCK WITH FLIP-UP HANDLE Lock Backset Component lockcase & accessories Price Type mm 9565T** lock & 9565T accessory lock & 9565T accessory standard finish satin chrome (13) T** lock & 9565T accessory lock & 9565T accessory standard finish bright zinc Lock (57) ** Specification reference only - lockcase, toilet accessory set and handles to be ordered separately 9566T-1** lock & 9566T-1 accessory* lock & 9566T-1 accessory* standard finish satin chrome (13) T-1** lock & 9566T-1 accessory* lock & 9566T-1 accessory* standard finish bright zinc Lock (57) ** Specification reference only - lockcase, toilet accessory set and handles to be ordered separately * May also be used with Modular 765 or Connect 310 sash lock respectively, in which case an additional half-set of lever handles (ref: 20C) is required for the external side of the door ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Modular Only

21 B COMPACT 3000 LOCKSETS LOCKCASES & STRIKING PLATES ONLY 20 Catalogue Ref Lock Backset Description Price Type mm Per Unit Mortice escape sash lock Mortice escape deadlock B 57 Mortice escape deadlock Mortice emergency nightlatch Mortice emergency deadlocking nightlatch Mortice emergency deadlocking nightlatch with snib Mortice sash lock Mortice nightlatch with snib Mortice nightlatch without snib Mortice deadlock Mortice latch T 57 Mortice bathroom lock Lockcases are supplied as standard with square faceplates. All prices are for finish 13 (Satin Chrome) & finish 20 (Polished Brass). Box quantities apply to standard locks (3065, 3088, 3098 & 3055T) ADDITION FOR MICROSWITCHING Per lock case where applicable ASSA 3 POINT MORTICE LOCKCASES LOCKCASES ONLY Catalogue Ref Lock Backset Description Price Type mm Per Unit point mortice lock (incl. top and bottom strikes) point mortice lock (incl. top and bottom strikes) Lockcases are supplied as standard with rounded faceplates. All prices are for finish 13 Satin Chrome OTHER FINISHES: Not Available Centre strike to be ordered separately , model , high security strike plate ASSA GATE LOCK LOCKCASES ONLY Catalogue Ref Lock Description Price Type Per Unit 0485 Gate Lock RH or LH Handle to suit gate lock supplied in eaches mm spindle for handle

22 D450 EURO LOCKSETS LOCKCASES & STRIKING PLATES ONLY B Catalogue Ref 21 Lock Backset Description Units Price Type mm per box Per Unit D Mortice sash lock D Mortice deadlock D Mortice latch D Mortice bathroom lock D Mortice escape nightlatch (no anti thrust bolt) D Mortice escape nightltach D Mortice escape nightlatch, split follower lockable handle on the outside D Mortice escape sash lock D Mortice escape sash lock, the deadbolt cannot be activated when the door is open, suitable for fire doors Lockcases are supplied with 20mm rounded faceplate or 24mm square faceplate. Finish 31 Stainless Steel Please specify which faceplate type, round or square, at the time of ordering ASSA NARROW PROFILE LOCKCASES LOCKCASES ONLY Catalogue Ref Lock Backset Description Price Type mm Per Unit Mortice emergency nightlatch (without striking plate) Deadlocking mortice nightlatch (without striking plate) Mortice hookbolt (without striking plate) Lockcases are supplied as standard with rounded faceplates. All prices are for finish 57 (Bright Zinc). OTHER FINISHES: Not Available

23 B MODULAR LOCKSETS LOCKCASES & STRIKING PLATES ONLY 22 Catalogue Ref Lock Backset Description Price Type mm Per Unit 760* 50 Deadlocking mortice nightlatch plus latch, with snib lock-back * * 50 Deadlocking mortice nightlatch plus latch, with key lock-back * Mortice sash lock Deadlocking mortice nightlatch plus latch, without lock-back Mortice deadlock Deadlocking mortice nightlatch, with snib lock-back Deadlocking mortice nightlatch, with key lock-back Mortice nightlatch, with key lock-back Deadlocking mortice nightlatch, without lock-back Mortice emergency nightlatch, without auto. deadlocking Mortice emergency nightlatch, light sprung Mortice emergency nightlatch Mortice emergency nightlatch, with key lock-back Mortice emergency nightlatch, light sprung, with key lock-back High security mortice sash lock High security mortice deadlock Mortice Latch Rollerlatch - without strike, only available in satin chrome finish Hookbolt - 90 degree turn version Hookbolt Lockcases are supplied as standard with rounded faceplates. All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) ADDITION FOR DIFFERENT FACEPLATE & STRIKING PLATE ASA/ANSI ADDITION FOR MICROSWITCHING Per lockcase where applicable * Special Article. Additional parts required

24 SPLIT FOLLOWER MODULAR LOCKSETS LOCKCASES & STRIKING PLATES ONLY B Catalogue Ref 23 Lock Backset Description Price Type mm Per Unit 500/9 50 Deadlocking mortice nightlatch plus latch, /9 70 with cylinder key lock-back /4 Modified version of the 500/9 lockset Mortice emergency sash lock with deadlocking latch Lockcases are supplied as standard with rounded faceplates. All prices are for finish 13 (Satin Chrome) / 2002 PACKAGE COMPLETE MODULAR PACKAGE Catalogue Ref Lock Backset Description Price Type mm Per Unit Modular 2000 Package - includes 13 (Satin Chrome) Sash Lock, 4802 std differ cylinder & 3 keys, 640 handles, 4256 & 4356 accs plates, security strike and all fixings Connect 2002 Package - includes 13 (Satin Chrome) Sash Lock, 4802 std differ cylinder & 3 keys, 640 handles, 4256 & 4356 accs plates, security strike and all fixings MODULAR TRIPLE LATCHING LOCKS LOCKCASES ONLY Catalogue Ref Lock Backset Description Price Type mm Per Unit Mortice latch (without striking plate) Mortice sash lock (without striking plate) Lockcases are supplied as standard with rounded faceplates. All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) ADDITION FOR DIFFERENT FACEPLATE & STRIKE PLATE ASA/ANSI

25 CONNECT LOCKSETS B LOCKCASES ONLY 24 Catalogue Ref Lock Backset Description Price Type mm Per Unit Deadlocking mortice nightlatch plus latch, with snib lock-back Deadlocking mortice nightlatch plus latch, with key lock-back Mortice sash lock Mortice deadlock Deadlocking mortice nightlatch, with snib lock-back Deadlocking mortice nightlatch, with key lock-back Escape double nightlatch with cylinder key lockback Deadlocking mortice nightlatch, without lock-back Mortice emergency nightlatch, light sprung Mortice emergency nightlatch Mortice emergency nightlatch, with key lock-back Mortice emergency nightlatch, light sprung, with key lock-back High security mortice sash lock supplied with a high security strike High security mortice deadlock supplied with a high security strike Mortice Latch Rollerlatch - strike plate not included, see page C34 for strike plates Escape double nightlatch with snib lockback Escape sash lock Lockcases supplied as standard with rounded faceplates & standard strikes. Prices are for finish 57 (Bright Zinc) Microswitching available on all above models see page B24 for additional pricing

26 OTHER LOCKCASES LOCKCASES & STRIKING PLATES ONLY B Catalogue Ref 25 Lock Backset Description Price Type mm Per Unit ADDITION FOR MICROSWITCHING Per lockcase where applicable SMALL CASE LOCKS Mortice deadlocking nightlatch 13 (Satin Chrome) with key lock-back High security mortice deadlock 13 (Satin Chrome) (Polished Brass) CYLINDER RIM LOCKS 776 n/a Rim nightlatch 66 (Black Lacquer) n/a Rim deadlock 66 (Black Lacquer) TOILET LOCK Mortice locking latch 92 (Gold Epoxy) LEVER LOCK 40C 45 Upright mortice lock, 3-Lever 57 (Bright Zinc) CUPBOARD AND CABINET LOCKCASES & LOCKSETS WITHOUT CYLINDERS Catalogue Ref Lock Backset Description Price Type mm Per Unit ASSA CABINET LOCKS n/a Cut deadlock (with striking plate) 11 (Polish Chrome) n/a Rim deadlock (with striking plate) 11 (Polish Chrome) n/a Rim sliding drawer lock (with striking plate) 11 (Polish Chrome) OTHER FINISHES: Not Available SPECIAL CYLINDER FOR ASSA 673.1; AND CABINET LOCKS R573 n/a Cylinder with 2 keys - standard differ 11 (Polish Chrome) R573 n/a Cylinder with 2 keys - standard differ 20 (Polished Brass) R573 n/a Cylinder with 2 keys - to pass 11 (Polish Chrome) R573 n/a Cylinder with 2 keys - to pass 20 (Polished Brass) R573 n/a Cylinder with 2 keys - master keyed 11 (Polish Chrome) R573 n/a Cylinder with 2 keys - master keyed 20 (Polished Brass) ASSA CUPBOARD LOCKS 1796 n/a Cupboard lock with d/locking latch 11 (Bright Chrome) n/a Cupboard lock (with striking plate) 57 (Bright Zinc) n/a Cupboard lock (with striking plate) 57 (Bright Zinc) n/a Cupboard lock 57 (Bright Zinc) n/a Cupboard lock 57 (Bright Zinc) OTHER FINISHES: Not Available

27 C CYLINDER ACCESSORIES IN SETS 26 Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit FOR MODULAR & SMALL CASE LOCKS 256 Outside cylinder ring 13 (Satin Chrome) Inside thumbturn 20 (Polished Brass) Outside cylinder ring 13 (Satin Chrome) Inside cylinder ring 20 (Polished Brass) Outside cylinder ring 13 (Satin Chrome) Inside blind rose 20 (Polished Brass) Outside blind rose 13 (Satin Chrome) Inside cylinder ring 20 (Polished Brass) Outside cylinder ring 13 (Satin Chrome) Inside thumbturn (disabled) 20 (Polished Brass) * Outside cylinder ring 13 (Satin Chrome) Inside cylinder ring 20 (Polished Brass) B* Outside blind cylinder & blind rose 13 (Satin Chrome) Inside cylinder ring 20 (Polished Brass) Standard sizes are 11mm, 13mm, 16mm & 18mm. * Cylinder accessories for Scandinavian Round cylinder are only available in 8mm and 13mm Non-standard sizes are available from your ASSA stockist. FOR ASSA NARROW PROFILE LOCKS 4159 Outside cylinder plate 11 (Bright Chrome) Inside blind rose 4359 Outside blind rose 11 (Bright Chrome) Inside cylinder plate 4459 Outside cylinder plate 11 (Bright Chrome) Inside cylinder plate 4859 Outside cylinder plate 11 (Bright Chrome) Inside thumbturn 5159 Outside cylinder plate 11 (Bright Chrome) Inside lever handle For 1361 only 5359 Outside blind rose 11 (Bright Chrome) Inside lever handle For 1361 only FOR ASSA CONNECT NARROW PROFILE LOCKS 44159E Outside cylinder plate 13 (Satin Chrome) Inside blind rose 44459E Outside cylinder plate 13 (Satin Chrome) Inside cylinder plate 44859E Outside cylinder plate 13 (Satin Chrome) Inside thumbturn plate 55859E Outside cylinder and handle plate 13 (Satin Chrome) Inside thumbturn and handle plate 55459E Outside cylinder and handle plate 13 (Satin Chrome) Inside cylinder and handle plate 55159E Outside cylinder and handle plate 13 (Satin Chrome) Inside lever handle 55059E Outside lever handle 13 (Satin Chrome) Inside lever handle 23699E Outside cylinder plate 13 (Satin Chrome) Inside lever handle For Connect Narrow locks please use Scan Oval Rim Cyls with tailpiece Ref: XX 07

28 TOILET ACCESSORIES (IN SETS) C Catalogue Ref 27 Accessory Description Finish Units Price Type Per Box Per Unit 9265 Outside red/white indicator 13 (Satin Chrome) Inside thumbturn (disabled) 20 (Polished Brass) Outside red/white indicator 13 (Satin Chrome) Inside thumbturn 20 (Polished Brass) Outside red/white indicator 13 (Satin Chrome) Inside thumbturn 20 (Polished Brass) T Outside standard handle & indicator 13 (Satin Chrome) Inside flip-up handle 20 (Polished Brass) T-1 Outside Indicator only 13 (Satin Chrome) Inside flip-up handle Equality Act compliant 20 (Polished Brass) If using a sash lock bottom handle to be specified separately or use 20C accessory see page D33 BLIND ROSES & ESCUTCHEONS (IN SETS) Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit 4265 Outside blind rose 13 (Satin Chrome) Inside blind rosein lieu of cylinders 20 (Polished Brass) Euro profile escutcheon set (1 pair = 1 unit) 13 (Satin Chrome) 5 prs (Polished Brass) 5 prs Euro Profile 6mm security escutcheon set 13 (Satin Chrome) (Polished Brass) Euro Profile 8mm security escutcheon set 13 (Satin Chrome) (Polished Brass)

29 C EMERGENCY BS EN 179 SETS 28 Catalogue Ref Type Description Units Price Per Box Per Unit CONNECT EMERGENCY LOCKS FOR USE WITH 179 ACCESSORIES mm Emergency Sash Lock mm mm Emergency Dead Lock mm mm Emergency Nightlatch mm ACCESSORIES MUST BE USED WITH 700 SERIES CONNECT LOCKS 179A Outside plate use with sash locks Single Inside middle Equality Act emergency handle on plate 179A Outside middle Equality Act emergency handle on plate for use with sash locks Double Inside middle Equality Act emergency handle on plate 179B Outside plate use with dead locks or nightlatches Single Inside middle Equality Act emergency handle on plate 179B Outside middle Equality Act emerg. handle on plate use with dead locks or nightlatches Double Inside middle Equality Act emerg. handle on plate These products have been tested to BS EN 179 and must be used together in order to achieve the CE mark Finish Satin Chrome, suits 50mm and 70mm backset only - Microswitching also available SPARE PARTS FOR 179 ACCESSORIES mm distance plates spare screw pack (contains 4 screws) spare green tags sticker RH & LH included spare nipples EMERGENCY ACCESSORIES / COMPONENTS Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit 8560 Outside blind rose 13 (Satin Chrome) Inside emergency thumbturn with plastic dome 20 (Polished Brass) Outside emergency thumbturn with plastic dome 13 (Satin Chrome) Double Inside emergency thumbturn with plastic dome 20 (Polished Brass) Outside deadknob 13 (Satin Chrome) & Knob Inside emergency thumbturn with plastic dome 20 (Polished Brass) Outside deadknob 13 (Satin Chrome) Inside 640 handle 20 (Polished Brass) A Outside blind rose 13 (Satin Chrome) Inside 640 handle 20 (Polished Brass) C Outside blind rose 13 (Satin Chrome) Inside 6655 handle (handed) 20 (Polished Brass) Emergency Thumbturn with plastic dome - for use with Scan Oval cylinder Emergency Thumbturn with plastic dome - for use with Scan Round cylinder Breakpins for emergency accessories Chain for emergency domes plastic dome - COMPLETE plastic dome - outer part only green dome - outer part only

30 ASSA CONNECT NARROW PROFILE HIGH SECURITY SETS C Catalogue Ref 29 Accessory Description Finish Units Price Type Per Box Per Unit 4559E Outside cylinder plate 11 (Polished Chrome) SCD Inside cylinder plate 4759E Outside blind rose 11 (Polished Chrome) SCD Inside cylinder plate 4659E Outside cylinder plate 11 (Polished Chrome) SCD Inside blind rose 5559E Outside cylinder & handle plate 11 (Polished Chrome) SCD Inside cylinder & handle plate mm distance plate mm distance plate Use Scan Oval Cyls Ref: XX 01/02/03 Sets suit 65mm thick doors BLIND ROSES & ESCUTCHEONS Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit Blind rose, 11mm (Outside) 13 (Satin Chrome) In lieu of cylinder 20 (Polished Brass) Blind rose (Inside) 13 (Satin Chrome) In lieu of thumbturn 20 (Polished Brass) Blind rose (1 pair = 1 unit) 13 (Satin Chrome) In lieu of lever handles 20 (Polished Brass) Blank plate, 8mm (Inside) 11 (Bright Chrome) For narrow profile accessories Blank plate, 8mm (Outside) 11 (Bright Chrome) For narrow profile accessories 4291 Decorative long plates 13 (Satin Chrome) (1 pair = 1 unit) 20 (Polished Brass) Security plates, for use with (Brown Epoxy) (1 pair = 1 unit) 4289 Decorative long plates 13 (Satin Chrome) (1 pair = 1 unit) 20 (Polished Brass) Security plates, for use with (Brown Epoxy) (1 pair = 1 unit) 22M Escutcheons, for use with lever locks 13 (Satin Chrome) (1 pair = 1 unit) 20 (Polished Brass)

31 C CYLINDER RINGS & PLATES 30 Catalogue Ref Accessory Description Units Price Type Per Box Per Unit FOR ASSA NARROW PROFILE LOCKS mm External cylinder plate mm External cylinder plate mm External cylinder plate mm Internal cylinder plate mm Internal cylinder plate mm Internal cylinder plate All prices are for finish 11 (Bright Chrome). OTHER FINISHES: Not Available FOR MODULAR, CONNECT & SMALL CASE LOCKS mm External cylinder ring mm External cylinder ring mm External cylinder ring mm External cylinder ring mm External cylinder ring mm External cylinder ring mm External cylinder ring mm External cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Internal cylinder ring mm Round cylinder ring mm Round cylinder ring All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Per Unit CYLINDER SLEEVES FOR ASSA SCANDINAVIAN ROUND CYLINDERS Cylinder sleeve 13 (Satin Chrome) Cylinder sleeve 20 (Polished Brass) Cylinder sleeve for blind cylinder (Satin Chrome) Cylinder sleeve for blind cylinder (Polished Brass)

32 THUMBTURNS & TURN FOLLOWERS C Catalogue Ref 31 Accessory Description Finish Units Price Type Per Box Per Unit Thumbturn without spindle 13 (Satin Chrome) For 256 accessory 20 (Polished Brass) Thumbturn for disabled without spindle 13 (Satin Chrome) For 9256 accessory 20 (Polished Brass) Narrow profile thumbturn without spindle 11 (Bright Chrome) For 4859 accessory Thumbturn follower with 43mm spindle 57 (Bright Zinc) For 256, 9256 & 4859 accessories ROUND THREADED CYLINDER ACCESSORIES Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit mm Spacer ring 13 (Satin Chrome) For rim cylinder 20 (Polished Brass) mm Spacer ring 13 (Satin Chrome) For rim cylinder 20 (Polished Brass) mm Spacer ring 13 (Satin Chrome) For rim cylinder 20 (Polished Brass) ASA/ANSI FACEPLATES Catalogue Ref Accessory Description Units Price Type Per Box Per Unit Faceplate ASA Faceplate ASA Faceplate ASA Faceplate ASA Faceplate ASA Faceplate ASA Faceplate ASA ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Per Unit

33 C TURN SCREWS 32 Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit M5 TURN SCREWS mm Turn screws 11 (Bright Chrome) mm Turn screws 11 (Bright Chrome) (Polished Brass) mm Turn screws 11 (Bright Chrome) (Polished Brass) mm Turn screws with waists 11 (Bright Chrome) (Bright Chrome) (Polished Brass) mm Turn screws 11 (Bright Chrome) (Polished Brass) mm Turn screws 11 (Bright Chrome) mm Turn screws 11 (Bright Chrome) (Polished Brass) mm Turn screws with waists 11 (Bright Chrome) mm Turn screws 11 (Bright Chrome) (Polished Brass) M4 TURN SCREWS mm Turn screws, suits 496 deadknob 11 (Bright Chrome) (Polished Brass) ONE-WAY SCREWS mm One-way screws with waist 11 (Bright Chrome) mm One-way screws with waist 11 (Bright Chrome) ANTI-VANDAL SCREWS mm Anti-vandal screws, without fixing tool 11 (Bright Chrome) FIXING TOOLS for use with Anti-vandal screws Not for sale to the general public NIPPLES for use with Turn screws & Anti-vandal screws mm diameter nipple 11 (Bright Chrome) (Polished Brass) (Bright Chrome) (Polished Brass) mm diameter nipple, suits 496 deadknob 11 (Bright Chrome)

34 COMPACT LOCKCASE ACCESSORIES C Catalogue Ref 33 Accessory Description Units Price Type Per Box Per Unit ANTI-DRILL PLATES Anti-drill plates - EURO profile cylinder Anti-drill plates - OVAL profile cylinder FACEPLATES Squared faceplate Rounded faceplate All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISH 20 (Polished Brass) Per Unit STRIKING PLATES Squared striking plate All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISH 20 (Polished Brass) Per Unit REBATE KITS (COMPONENTS & REBATED STRIKE) mm for nightlatch mm for nightlatch mm for nightlatch mm for sash lock, deadlock, latch & bathroom lock mm for sash lock, deadlock, latch & bathroom lock mm for sash lock, deadlock, latch & bathroom lock mm for sash lock, deadlock, latch & bathroom lock mm for sash lock, deadlock, latch & bathroom lock mm for sash lock, deadlock, latch & bathroom lock All prices are for finish 13 (Satin Chrome). Only sold in components Note: Rebate kits can only be used with radiused faceplate locks Radiused faceplates are not included in rebate kits ADDITION FOR DIFFERENT FINISH 20 (Polished Brass) Per Unit +0.00

35 C LOCKCASE ACCESSORIES 34 Catalogue Ref Accessory Description Units Price Type Per Box Per Unit Rim cover case Drill-resistant cover for SMALL CASE locks Faceplate / blocking key (new pattern) Faceplate / blocking key (old pattern) LOCK SHIELD FOR CONNECT & MODULAR LOCKS mm for Scan Oval Cylinders Connect mm for Scan Oval Cylinders Connect mm for Scan Oval Cylinders Connect mm for Scan Round Cylinders Connect mm for Scan Round Cylinders Connect mm for Scan Oval Cylinders Modular mm for Scan Oval Cylinders Modular mm for Scan Round Cylinders Modular mm for Scan Round Cylinders Modular Lock Shield fits onto the outside of the lockcase body only, anti drill plate tested to BS EN REBATE KITS Catalogue Ref Accessory Description Units Price Type Per Box Per Unit MODULAR LOCKS mm, for Modular locks mm, for Modular locks mm, for Modular locks All prices are for finish 13 (Satin Chrome) ADDITION FOR DIFFERENT FINISH 20 (Polished Brass) Per Unit CONNECT LOCKS mm, for Connect locks mm, for Connect locks mm, for Connect locks Polished Brass not available FLUSH BOLTS 1296 Flush bolt for passive leaf in wooden or steel doors c/w strike Only available in finish 57 (Bright Zinc)

36 STRIKING PLATES C Catalogue Ref 35 Accessory Description Finish Units Price Type Per Box Per Unit FOR MODULAR LOCKS mm width, for use with mortice locks 61 (Satin Zinc) (Polished Brass) mm width, for use with mortice locks 61 (Satin Zinc) (Polished Brass) mm width, for use with mortice locks 61 (Satin Zinc) (Polished Brass) ASA/ANSI, for use with mortice locks 61 (Satin Zinc) (Polished Brass) mm width, for use with mortice latches 61 (Satin Zinc) (Polished Brass) for use with deadlocks 61 (Satin Zinc) (Polished Brass) for 1520 split follower locks 61 (Satin Zinc) (Polished Brass) SECURITY STRIKING PLATES for mortice locks, (Satin Zinc) (Polished Brass) for deadlocks 61 (Satin Zinc) (Polished Brass) for hookbolt locks 57 (Bright Zinc) FOR CONNECT LOCKS Standard Strike 57 (Bright Zinc) Security Strike 57 (Bright Zinc) FOR NON-MODULAR LOCKS for cylinder rim nightlatch (outward opening) 57 (Bright Zinc) FOR COMPACT LOCKS for 3065 Sash lock 13 (Satin Chrome) for 3088 Deadlock 13 (Satin Chrome) FOR ROLLER BOLT LOCKS 766 (MODULAR) or 313 (CONNECT) single strike mm thick drs (Stainless Steel) double strike mm thick drs (Stainless Steel) single strike mm thick drs (Stainless Steel) double strike mm thick drs (Stainless Steel) single strike mm thick drs (Stainless Steel) double strike mm thick drs (Stainless Steel) single strike mm thick drs (Stainless Steel) double strike mm thick drs (Stainless Steel)

37 D ASSA "CLASSIC" 36 Catalogue Ref Handle Description Units Price Type Per Box Per Unit 640 UNSPRUNG on Round Rose (1 Pair = 1 Unit) UNSPRUNG on Round Rose (1 Pair = 1 Unit) SPRUNG on Round Rose (1 Pair = 1 Unit) SPRUNG on Round Rose (1 Pair = 1 Unit) SPRUNG on Round Rose (1 Pair = 1 Unit) All prices are for finish 13 (Satin Chrome) ALTERNATIVE FINISHES FOR ROUND ROSE HANDLES 20 (Polished Brass) Per Unit A Half set of 640 handle blind rose 13 (Satin Chrome) A Half set of 640 handle blind rose 20 (Polished Brass) ASSA "DISTINCTION" Catalogue Ref Handle Description Units Price Type Per Box Per Unit 6655 SPRUNG on Round Rose (1 Pair = 1 Unit) C Half set of 6655 handle blind rose, handed RH or LH All prices are for finish 13 (Satin Chrome). ALTERNATIVE FINISHES FOR "DISTINCTION" HANDLES 11 (Polished Chrome) or 20 (Polished Brass) Per Unit ASSA "DISTINCTION" ANTI-BACTERIAL FURNITURE HANDLE - ADDION TREATMENT 6655 SPRUNG on Round Rose (1 Pair = 1 Unit) Finish is similar to Satin Stainless Steel ACCESSORIES FOR LEVER HANDLES ON ROUND ROSE ROUND ROSE CONCEALED FIXING FOR "CLASSIC" AND 6655 "DISTINCTION" HANDLES Cover Cap complete with Plastic Washer All prices are for finish 13 (Satin Chrome). ALTERNATIVE FINISHES FOR "CLASSIC" AND 6655 "DISTINCTION" HANDLES COVER CAPS 11 (Polished Chrome) or 20 (Polished Brass) Per Unit +0.00

38 ALUMINIUM FURNITURE D Catalogue Ref 37 Handle/Acc Description Units Price Type Per Box Per Unit SATIN ANODISED ALUMINIUM FURNITURE HANDLE Return to door handle (1 Pair = 1 Unit) SCANDINAVIAN ACCESSORIES 256BZ Outside cylinder ring / Inside Thumbturn BZ Outside cylinder ring / Inside cylinder ring BZ Outside blind rose / Inside cylinder ring BZ Outside cylinder ring / Inside blind rose BZ Toilet Indicator Set Standard sizes are 10mm and 15mm MISCELLANEOUS ACCESSORIES 990BZ Blind rose in lieu of handle for Scandinavian and Euro Locks BZ Euro escutcheons with woodscrews (1 Pair = 1 Unit) BZ Blind rose with woodscrews (1 Pair = 1 Unit) BZ Toilet Indicator Set for Euro Locks only FINGER GUARD PROTECTION 7012F Finger Guard 1.4m push/stop side F Finger Guard 2.05m push/stop side C Finger Guard 1.4m pull/hinge side C Finger Guard 2.05m pull/hinge side Finger Guard 2.25m for double action doors (incl. front & back x 1) DOOR STOPS 3737 Floor Door Stop Wall Mounted Door Stop Wall Mounted Door Stop All prices are for Satin Anodised Aluminium only

39 D ALUMINIUM ANTI-BACTERIAL FURNITURE 38 Catalogue Ref Handle/Acc Description Units Price Type Per Box Per Unit HANDLE - TREATMENT ANTI-MICROBIAL (TAM) Return to door handle (1 Pair = 1 Unit) SCANDINAVIAN ACCESSORIES - TREATMENT ANTI-MICROBIAL (TAM) 256BZ Outside cylinder ring / Inside Thumbturn BZ Outside cylinder ring / Inside cylinder ring BZ Outside blind rose / Inside cylinder ring BZ Outside cylinder ring / Inside blind rose BZ Toilet Indicator Set Standard sizes are 10mm and 15mm MISCELLANEOUS ACCESSORIES - TREATMENT ANTI-MICROBIAL (TAM) 990BZ Blind rose in lieu of handle for Scandinavian and Euro Locks BZ Euro escutcheons with woodscrews (1 Pair = 1 Unit) BZ Blind rose with woodscrews (1 Pair = 1 Unit) BZ Toilet Indicator Set for Euro Locks only Box quantities of 50 + for TAM per item BRIGHTHANDLE Catalogue Ref Handle Description Units Price Type Per Box Per Unit Alfa Outside Brighthandle Batteries supplied AA x Battery Inside stainless steel handle Alfa Outside Brighthandle 12V DC Online Inside stainless steel handle Alfa Outside Brighthandle 12V DC Online Duo Inside Brighthandle DOT or LINE Outside Brighthandle Batteries supplied AA x Battery Inside stainless steel handle DOT or LINE Outside Brighthandle 12V DC Online Inside stainless steel handle DOT or LINE Outside Brighthandle 12V DC Online Duo Inside Brighthandle Please specify for use with Scandinavian Locks or Euro Locks Prices include outside emergency release and inside thumbturn which is packed with every pair of handles Online Only DDA 9566T Brighthandle 9566T Outside Brighthandle DDA 12V DC Bright Inside Flip up handle For use with Scandinavian Locks only Please specify Right Hand or Left Hand

40 DOOR KNOBS D Catalogue Ref 39 Accessory Description Units Price Type Per Box Per Unit 496 Dead knob (Door pull) All prices are for finish 13 (Satin Chrome). ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Per Unit CLUTCH THUMBTURN Catalogue Ref Accessory Description Units Price Type Per Box Per Unit DC Clutch Thumbturn 13mm DC Clutch Thumbturn 18mm DC265 Clutch Thumbturn toilet version DC265 Key Emergency Key for Outside Indicator All prices are for finish 13 (Satin Chrome). BLIND ROSES Catalogue Ref Accessory Description Units Price Type Per Box Per Unit Blind rose in lieu of lever handles (1 Pair = 1 Unit) All prices are for finish 13 (Satin Chrome). ADDITION FOR DIFFERENT FINISHES 20 (Polished Brass) Per Unit

41 D HANDLE ACCESSORIES 40 Catalogue Ref Accessory Description Finish Units Price Type Per Box Per Unit SPINDLES mm Split spindle - for split follower locks 57 (Bright Zinc) mm Split spindle - for split follower locks 57 (Bright Zinc) mm Split spindle - for split follower locks 57 (Bright Zinc) x 80mm spindle 57 (Bright Zinc) x 102mm spindle 57 (Bright Zinc) x 125mm spindle 57 (Bright Zinc) mm Half split spindle - for split follower locks 57 (Bright Zinc) mm Half split spindle - for split follower locks 57 (Bright Zinc) mm Half split spindle - for split follower locks 57 (Bright Zinc) x 80mm Splitting spindle 57 (Bright Zinc) x 95mmmm Splitting spindle 57 (Bright Zinc) x 125mm Splitting spindle 57 (Bright Zinc) x 90mm Spindle for 1325 Handle SAA 57 (Bright Zinc) x 110mm Spindle for 1325 Handle SAA 57 (Bright Zinc) x 120mm Spindle for 1325 Handle SAA 57 (Bright Zinc) mm Split spindle for 1325 Handle SAA 57 (Bright Zinc) * Half split spindle 1/2 dr 16mm-30mm thick* 31 (Stainless Steel) * Connecting spindle for 32-60mm dr thick* 31 (Stainless Steel) Spindle (std) for drs 32-65mm thick 31 (Stainless Steel) Spindle for drs mm drs thick 31 (Stainless Steel) * For split follower locks FOLLOWERS Flip-up handle follower (LH Outward) 00 (Unplated) Flip-up handle follower (RH Outward) 00 (Unplated) Handle follower 00 (Unplated) TURN SCREWS mm Turn screws with waists 11 (Bright Chrome) (Bright Chrome) (Polished Brass) mm Turn screws 11 (Bright Chrome) (Polished Brass) NOTE: ASSA handles are supplied as standard with turn screws Please see Section C for the full range of sizes and finishes available ANTI-VANDAL SCREWS mm Anti-vandal screws, without fixing tool 11 (Bright Chrome) FIXING TOOLS for use with Anti-vandal screws Not for sale to the general public NIPPLES for use with Turn screws & Anti-vandal screws mm diameter Nipple 11 (Bright Chrome) (Polished Brass) (Bright Chrome) (Polished Brass) mm diameter nipple, suits 496 deadknob 11 (Bright Chrome)

42 RUKO-LINE HANDLES - STAINLESS STEEL DOOR FURNITURE E Catalogue Ref 41 Handle/Acc Description Units Price Type Per Box Per Unit 16mm L Shape 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) mm U Shape 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) mm L Shape 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) mm U Shape 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) Hospital 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) Holgaard 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) :DO:RE:MI HANDLES :DO: 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) :RE: 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) :MI: 30mm centres on rose (1 Pair = 1 Unit) Lever Handle 38mm centres on rose (1 Pair = 1 Unit) Grips for backplates (1 Pair = 1 Unit) All prices are for finish 31 (Stainless Steel). For doors thickness 32mm-60mm for other sizes please contact the office RUKO LINE & :DO:RE:MI: CYLINDER ACCESSORIES FOR USE WITH MODULAR & CONNECT LOCKS 256RL Outside cylinder ring 31 (Stainless Steel) Inside thumbturn (sizes 11, 13, 16, 18mm) 2256RL Outside blind rose 31 (Stainless Steel) Inside cylinder ring (sizes 11, 13, 16, 18mm) 2356RL Outside cylinder ring 31 (Stainless Steel) Inside blind rose (sizes 11, 13, 16, 18mm) 18256RL Outside cylinder ring 31 (Stainless Steel) Inside cylinder ring (sizes 11, 13, 16, 18mm) 9256RL Outside cylinder ring (sizes 11, 13, 16, 18mm) 31 (Stainless Steel) Inside thumbturn (disabled) 256:DO: Outside cylinder ring 31 (Stainless Steel) Inside thumbturn (sizes 11, 13, 16, 18mm) 256:RE: Outside cylinder ring 31 (Stainless Steel) Inside thumbturn (sizes 11, 13, 16, 18mm) 256:MI: Outside cylinder ring 31 (Stainless Steel) Inside thumbturn (sizes 11, 13, 16, 18mm)

43 E RUKO LINE & :DO:RE:MI: ACCESSORIES 42 Catalogue Ref Handle/Acc Description Finish Units Price Type Per Box Per Unit 265RL Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 9265RL Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Disabled Thumbturn 265:DO: Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 265:RE: Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 265:MI: Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 262 RL Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 9262RL Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Disabled Thumbturn 994RL Outside blind rose 31 (Stainless Steel) Inside blind rose M4 in lieu of handles 995RL Outside blind rose 31 (Stainless Steel) Inside blind rose M5 in lieu of cylinders 996RL Outside blind rose (for Euro Locks) 31 (Stainless Steel) C:38mm Inside blind rose M4 in lieu of handles 220RL Euro Profile Cylinder Escutcheon set 31 (Stainless Steel) complete with M5 bolt through fixings 38mm 320RL Euro Profile Cylinder Escutcheon set 31 (Stainless Steel) complete with M5 woodscrews RUKO LINE RECTANGULAR BACKPLATES Blind Rose 52mm 31 (Stainless Steel) Blind Rose 60mm 31 (Stainless Steel) Handle Plate 52mm 31 (Stainless Steel) Handle Plate 60mm 31 (Stainless Steel) Cylinder+Handle 60mm 31 (Stainless Steel) Thumbturn+Handle 60mm 31 (Stainless Steel) Disabled Turn+Handle 60mm 31 (Stainless Steel) Thumbturn only 60mm 31 (Stainless Steel) Disabled Turn only 60mm 31 (Stainless Steel) Toilet Indicator+Handle 52mm 31 (Stainless Steel) Toilet Indicator+Handle 60mm 31 (Stainless Steel) Toilet Turn+Handle 52mm 31 (Stainless Steel) Toilet Turn+Handle 60mm 31 (Stainless Steel) Toilet Disabled Turn+Handle 52mm 31 (Stainless Steel) Toilet Disabled Turn+Handle 60mm 31 (Stainless Steel) Cylinder only 60mm 31 (Stainless Steel) Plate for 2000/2002 lock 60mm 31 (Stainless Steel) Euro Cylinder+Handle 52mm 31 (Stainless Steel) Euro Cylinder only 52mm 31 (Stainless Steel)

44 RUKO LINE SQUARE BACKPLATES E Catalogue Ref 43 Backplate Ref Description Finish Units Price Per Box Per Unit (RH), (LH) Handle only 31 (Stainless Steel) Blind Rose only 31 (Stainless Steel) (RH), (LH) Cylinder+Handle 31 (Stainless Steel) (RH), (LH) Thumbturn+Handle 31 (Stainless Steel) (RH), (LH) Disabled Turn+Handle 31 (Stainless Steel) (RH), (LH) Toilet Indicator+Handle 31 (Stainless Steel) (RH), (LH) Toilet Turn+Handle 31 (Stainless Steel) (RH), (LH) Toilet Disabled Turn+Handle 31 (Stainless Steel) :DO:RE:MI: RECTANGULAR & SQUARE BACKPLATES :DO: Thumbturn+Handle 60mm 31 (Stainless Steel) :DO: Toilet Turn+Handle 60mm * 31 (Stainless Steel) :DO: Thumbturn only 31 (Stainless Steel) (RH), (LH) :DO: Toilet Turn+Handle - Square** 31 (Stainless Steel) (RH), (LH) :DO: Thumbturn+Handle - Square 31 (Stainless Steel) :RE: Thumbturn+Handle 60mm 31 (Stainless Steel) :RE: Toilet Turn+Handle 60mm * 31 (Stainless Steel) :RE: Thumbturn only 31 (Stainless Steel) (RH), (LH) :RE: Toilet Turn+Handle - Square** 31 (Stainless Steel) (RH), (LH) :RE: Thumbturn+Handle - Square 31 (Stainless Steel) :MI: Thumbturn+Handle 60mm 31 (Stainless Steel) :MI: Toilet Turn+Handle 60mm * 31 (Stainless Steel) :MI: Thumbturn only 31 (Stainless Steel) (RH), (LH) :MI: Thumbturn+Handle - Square 31 (Stainless Steel) (RH), (LH) :MI: Toilet Turn+Handle - Square** 31 (Stainless Steel) * For use with Toilet Indicator+Handle 60mm ** For use with /64 Toilet Indicator+Handle Sqaure SPARE PARTS Wood screws for backplates 31 (Stainless Steel) M4x75mm screws excl nipples (handles) 31 (Stainless Steel) M4x110mm screws excl nipples (handles) 31 (Stainless Steel) M5x75mm screws excl nipples (cylinders) 31 (Stainless Steel) M5x110mm screws excl nipples (cylinders) 31 (Stainless Steel) M5 nipple suits cyl accs and backplates 31 (Stainless Steel) Grub screw for 16mm handles 31 (Stainless Steel) Grub screw for 19mm handles 31 (Stainless Steel) Spindle for door thickness 32-60mm(std) 31 (Stainless Steel) Spindle for door thickness 60-85mm 31 (Stainless Steel) Spindle for door thickness 85mm-110mm 31 (Stainless Steel) * Half split spindle 1/2 dr 16mm-30mm thick* 31 (Stainless Steel) * Connecting spindle for 32-60mm dr thick* 31 (Stainless Steel) Allen Key for Handles * For split follower locks

45 E RUKO LINE PULL HANDLES 44 Catalogue Ref Handle/Acc Description Units Price Type Per Box Per Unit STRAIGHT PULL HANDLES - BOLT THROUGH FIXING & BACK TO BACK Pull 16x125mm Pull Handle 16mmØx125mm back to back (1 Pair = 1 Unit) Pull 19x300mm Pull Handle 19mmØx300mm bolt through Pull 25x400mm Pull Handle 25mmØx400mm bolt through Pull 25x400mm Pull Handle 25mmØx400mm back to back (1 Pair = 1 Unit) Pull 32x400mm Pull Handle 32mmØx400mm bolt through Pull 32x400mm Pull Handle 32mmØx400mm back to back (1 Pair = 1 Unit) Pull 32x650mm Pull Handle 32mmØx650mm bolt through Pull 32x650mm Pull Handle 32mmØx650mm back to back (1 Pair = 1 Unit) Bolt through fixings are a 'pig nosed' head CRANKED PULL HANDLES - BOLT THROUGH & BACK TO BACK Pull 25x400mm Pull Handle 25mmØx400mm bolt through Pull 25x400mm Pull Handle 25mmØx400mm back to back (1 Pair = 1 Unit) Pull 32x400mm Pull Handle 32mmØx400mm bolt through Pull 32x400mm Pull Handle 32mmØx400mm back to back (1 Pair = 1 Unit) Pull 32x650mm Pull Handle 32mmØx650mm bolt through Pull 32x650mm Pull Handle 32mmØx650mm back to back (1 Pair = 1 Unit) Bolt through fixings are a 'pig nosed' head CIRCULAR PULL HANDLE - BACK TO BACK Pull 32x400mm Pull Handle 32mmØx400mm back to back (1 Pair = 1 Unit) :DO:RE:MI: PULL HANDLES Pull 24x300mm :DO: Pull Handle 24mmØx300mm bolt through Pull 24x300mm :DO: Pull Handle 24mmØx300mm back to back (1 Pair=1 Unit) Pull 24x300mm :RE: Pull Handle 24mmØx300mm bolt through Pull 24x300mm :RE: Pull Handle 24mmØx300mm back to back (1 Pair=1 Unit) Pull 24x300mm :MI: Pull Handle 24mmØx300mm bolt through Pull 24x300mm :MI: Pull Handle 24mmØx300mm back to back (1 Pair=1 Unit) Bolt through fixings are a 'pig nosed' head MACHINE SCREWS 300mm M6x65mm for doors upto 40mm M6x100mm for doors upto 75mm mm or 650mm M10x65mm for doors upto 40mm M10x100mm for doors upto 75mm For bolt through applications, to be ordered as an additional item, alternative to 'pig nosed' head bolt

46 SCANFLEX LEVER HANDLES STAINLESS STEEL E Catalogue Ref 45 Handle/Acc Description Units Price Type Per Box Per Unit COPENHAGEN UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) OSLO UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) NORDIC U UNSPRUNG return lever handles on Round Rose (1 Unit=1 Pair) NORDIC L UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) SWEDEN UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) NORWAY UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) ICELAND UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) DENMARK UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) FINLAND UNSPRUNG lever handles on Round Rose (1 Unit = 1 Pair) All prices are for finish 31 (Stainless Steel). SCANFLEX PULL HANDLES SURFACE FIXED Pull 19x200mm Pull Handle 19mmØx200mm with roses BOLT THROUGH FIXING Pull 25x300mm Pull Handle 25mmØx300mm Pull 32x300mm Pull Handle 32mmØx300mm Pull 25x400mm Pull Handle 25mmØx400mm Pull 32x400mm Pull Handle 32mmØx400mm Pull 25x400mm Pull Handle Cranked 25mmØx400mm Pull 32x400mm Pull Handle Cranked 32mmØx400mm Pull 25x600mm Pull Handle 25mmØx600mm Pull 32x600mm Pull Handle 32mmØx600mm Circ 32x300mm Pull Handle Circular 32mmØx300mm BACK TO BACK FIXING Pull 25x300mm Pull Handle 25mmØx300mm (1 Unit = 1 Pair) Pull 32x300mm Pull Handle 32mmØx300mm (1 Unit = 1 Pair) Pull 25x400mm Pull Handle 25mmØx400mm (1 Unit = 1 Pair) Pull 32x400mm Pull Handle 32mmØx400mm (1 Unit = 1 Pair) Pull 25x400mm Pull Handle Cranked 25mmØx400mm (1 Unit = 1 Pair) Pull 32x400mm Pull Handle Cranked 32mmØx400mm (1 Unit = 1 Pair) Pull 25x600mm Pull Handle 25mmØx600mm (1 Unit = 1 Pair) Pull 32x600mm Pull Handle 32mmØx600mm (1 Unit = 1 Pair) Circ 32x300mm Pull Handle Circular 32mmØx300mm (1 Unit = 1 Pair) All prices are for finish 31 (Stainless Steel).

47 E SCANFLEX ACCESSORIES, BLIND ROSES & ESCUTCHEONS 46 Catalogue Ref Handle/Acc Description Finish Units Price Type Per Box Per Unit FOR USE WITH MODULAR LOCKS 256SF Outside cylinder ring 34 (St Steel Effect) Inside thumbturn (sizes 11, 13, 16, 18mm) 2256SF Outside blind rose 34 (St Steel Effect) Inside cylinder ring (sizes 11, 13, 16, 18mm) 2356SF Outside cylinder ring 34 (St Steel Effect) Inside blind rose (sizes 11, 13, 16, 18mm) 18256SF Outside cylinder ring 34 (St Steel Effect) Inside cylinder ring (sizes 11, 13, 16, 18mm) 9256SF Outside cylinder ring (sizes 11, 13, 16, 18mm) 31 (Stainless Steel) Inside thumbturn (disabled) 265SF Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Thumbturn 9265SF Outside red/white indicator 31 (Stainless Steel) Toilet Set Inside Disabled Thumbturn 994SF Outside blind rose 31 (Stainless Steel) Inside blind rose M4 in lieu of handles 995SF Outside blind rose 31 (Stainless Steel) Inside blind rose M5 in lieu of cylinders Blind Rose External Blind Rose M4 in lieu of lever 31 (Stainless Steel) External handles (without screws) Blind Rose Internal Blind Rose M4 in lieu of lever 31 (Stainless Steel) Internal handles (without screws) Blind Rose External Blind Rose M5 in lieu of cylinder 31 (Stainless Steel) External (without screws) Blind Rose Internal Blind Rose M5 in lieu of cylinder 31 (Stainless Steel) Internal (without screws) Ext Cyl External Cylinder Ring 34 (St Steel Effect) Ring (6, 8, 11, 13, 16, 18, 21, 24mm) Int Cyl Internal Cylinder Ring 34 (St Steel Effect) Ring (6, 8, 11, 13, 16, 18, 21, 24mm) FOR USE WITH EURO LOCKCASES 320SF Euro Profile Cylinder escutcheon set 31 (Stainless Steel) (complete with woodscrews) (1 pair = 1 unit) 262SF Outside red/white toilet indicator 31 (Stainless Steel) Inside thumbturn 9262SF Outside red/white toilet indicator 31 (Stainless Steel) Inside disabled thumbturn FOR USE WITH COMPACT LOCKCASES 320SF Euro Profile Cylinder escutcheon set 31 (Stainless Steel) (complete with woodscrews) (1 pair = 1 unit) Blind Rose External Blind Rose M4 in lieu of lever 31 (Stainless Steel) External handles (without screws) Blind Rose Internal Blind Rose M4 in lieu of lever 31 (Stainless Steel) Internal handles (without screws)

48 SCANFLEX MISCELLANOUS ACCESSORIES (IN SETS) E Catalogue Ref 47 Handle/Acc Description Finish Units Price Type Per Box Per Unit Floor Stop Floor Stop 45mmØxH25mm 31 (Stainless Steel) Floor Stop Floor Stop 20mmØxH55mm 31 (Stainless Steel) Wall Stop Wall Door Stop 5mmxH55mm 31 (Stainless Steel) Wall Stop Wall Door Stop 5mmxH75mm 31 (Stainless Steel) Coat Hook Coat Hook 31 (Stainless Steel) Sliding Door Sliding Door Handle W50mmxH100mm 31 (Stainless Steel) Handle SCANFLEX SIGNAGE Fire Door Fire Door Keep Shut 31 (Stainless Steel) Keep Shut 75mm diameter, self adhesive fixing Fire Door Fire Door Keep Locked 31 (Stainless Steel) Keep Locked 75mm diameter, self adhesive fixing Automatic Fire Automatic Fire Door Keep Clear 31 (Stainless Steel) Door Keep Clear 75mm diameter, self adhesive fixing Fire Door Fire Door Keep Locked 31 (Stainless Steel) Keep Locked 75mm diameter, self adhesive fixing Male Toilet Male Toilet 31 (Stainless Steel) mm diameter, self adhesive fixing FemaleToilet Female Toilet 31 (Stainless Steel) mm diameter, self adhesive fixing Disabled Toilet Disabled Toilet 31 (Stainless Steel) mm diameter, self adhesive fixing MACHINE SCREWS All M8x65mm for doors upto 40mm ScanFlex Pulls M8x100mm for doors upto 75mm For bolt through applications, to be ordered as an additional item, alternative to 'pig nosed' head bolt SPINDLES * Half split spindle 1/2 dr 16mm-30mm thick* 31 (Stainless Steel) * Connecting spindle for 32-60mm dr thick* 31 (Stainless Steel) Spindle (std) for drs 32-65mm thick 31 (Stainless Steel) Spindle for drs mm drs thick 31 (Stainless Steel) * For split follower locks THUMBTURN T/Turn Thumbturn ScanFlex 31 (Stainless Steel) ScanFlex (without spindle)

49 F DOOR CONTROLS ASSA ABLOY MECHANICAL DOOR CLOSERS 48 Catalogue Ref Door Control Description Price Type Per Unit Rack & Pinion Closers DC110A DC110 Rack & Pinion EN size 3 with arm (no back check) DC120A DC120 Rack & Pinion Template Adj EN size 2/3/4 with arm DC140A DC140 Rack & Pioion Template Adj EN size 2/3/4 with arm DC200A DC200A Rack & Pinion, adjustable EN size 2-4 with L190 std arm DC300A DC300A Rack & Pinion, adjustable EN size 3-6 with with L190 std arm DC300A+DA DC300A+DC Rack & Pinion, adjustable EN size 3-6 with L190 std arm DC340A DC340A Rack & Pinion, adjustable EN size 2-6 with L190 std arm DC340A+DA DC340A+DC Rack & Pinion, adjustable EN2-6 with L190 std arm DC340AT3 DC340AT3 Rack & Pinion, adjustable EN size 1-4 with G193 Slide arm DC340AT5 DC340AT5 Rack & Pinion, adjustable EN size 1-4 with G195 Slide arm DC347A DC347A Rack & Pinion heavy duty, adjustable EN size 5-7 with L197 arm All prices are for Silver finish, with arms and parallel brackets included All models include backcheck as standard. RAL colours white, silver and brown are available CAM-motion Closers DC500A DC500 CAM-motion, adjustable EN size 1-4 with G195 slide arm DC700A DC700 CAM-motion, adjustable EN size 3-6 with backcheck & G195 slide arm All prices are for Silver finish. RAL colours Black, Brown and White also available Concealed CAM-motion Closers DC840 DC840 Concealed CAM-motion, adjustable EN size DC860 DC860 Concealed CAM-motion, adjustable EN size DC840A DC840A Concealed CAM-motion, adjustable EN size 1-5 with DC DC860A DC860A Concealed CAM-motion, adjustable EN size 1-5 with DC Electromechanical Free Swing Closers DC640A DC640A EM Free Swing system, adjustable EN size 3-4 with L690 std arm DC640T DC640T EM Free Swing system, adjustable EN 3-4 with G694 slide arm Only available in Silver finish Fire Door Hold Open Systems G460 G460 Hold Open system for single doors G461 G461 Mechanical co-ordinator system for double rebated doors G462 G462 Hold Open system x 2 for double doors G464 G464 Hold Open system x 1 for double doors All Fire door hold open systems must be used with the DC700 Closer body Fire door systems are only available in silver finish FD101 carry bar must be used with these sets to ensure CE mark Bodies for fire door systems DC700 DC700 Cam-motion closer body for use with fire door systems DC860 DC860 Concealed CAM-motion closer body - use with concealed fire door sys Arms L190 L190 std arm for use with the DC200, DC300 and DC G193 G193 Standard slide arm for use with DC340, DC500 and DC G195 G195 (194) Height-adjustable slide arm for use with DC340, DC500, DC L197 L197 Extra strong std arm for use with DC L690 L690 Standard arm free swing for use with DC G694 G694 Slide arm free swing for use with DC DC892 DC892 Small concealed side arm for use with DC860 or DC DC893 DC893 Large concealed side arm for use with DC860 or DC All prices are for silver finish

50 DOOR CONTROLS ASSA ABLOY MECHANICAL DOOR CLOSERS - STAINLESS STEEL F Catalogue Ref 49 Door Control Description Price Type Per Unit Rack & Pinion Closers DC200A/SS DC200A/SS R&P, adjustable EN size 2-4 with L190 std arm Stainless Steel DC300A/SS DC300A/SS R&P, adjustable EN size 3-6 with L190 std arm Stainless Steel DC300A+DA/SS DC300A+DA/SS R&P, adjustable EN size 2-6 with L190 std arm Stainless Steel DC340A/SS DC340A/SS R&P, adjustable EN size 2-6 with L190 std arm Stainless Steel DC340A+DA/SS DC340A+DA/SS R&P, adjustable EN size 2-6 with L190 std arm Stainless Steel DC340AT5/SS DC340AT5/SS R&P, adjustable EN size 1-4 with G195 slide arm Stainless Steel DC347A/SS DC347A/SS R&P, adjustable EN size 5-7 with L197 arm All prices are for Stainless Steel, with arms and parallel brackets included where applicable CAM-motion Closers DC500A/SS DC500A/SS CAM- motion, adjustable EN size 1-4 with G195 Slide Arm DC700A/SS DC700A/SS CAM- motion, adjustable EN size 3-6 with G195 Slide Arm Arms L190 L190 Standard Link Arm in Stainless Steel G195 DCG195 Height Adjustable slide arm for use with DC340, DC500, DC700 (SS) 73.84

51 F DOOR CONTROLS 50 Catalogue Ref Door Control Description Price Type Per Unit MECHANICAL DOOR CLOSERS 240 STD 240 Standard, includes Back Check DC Delayed Closing, includes Back Check CAM 250 Cam Action (includes Back Check) Cam Action Sliding Arm Closer, Includes Back Check DC Delayed Closing, includes Back Check Closer, includes Back Check Closer with back check complete with sliding arm Closer (template adjusted) All prices are for Satin Silver finish. FREE SWING SYSTEM FD440 Electro-Hydraulic Door Closer Body FD140 Connection Box for FD440 with switch FD494 Free Swing Sliding Arm for FD FD499 Free Swing Standard Arm for FD FIRE DOOR SYSTEMS FD461 Mechanical Co-ordinator for use with door closer bodies* FD460 Electro-mechanical hold open for single door FD464 Electro-mechanical hold open x 1 for double door * FD462 Electro-mechanical hold open x 2 for double door * *FD101 carry bar must be used with these sets to ensure CE mark NOTE: The FD460 Series replaces the FD450 Series 250 CAM 250 Cam Action, incl Back Check - Body only for use with FD Systems CAM 330 Cam Action, incl Back Check - Body only for use with FD Systems NOTE: Can also use the 500 and 700 Cam Action Closer bodies. Finish: Satin Chrome FLOOR SPRINGS 4212 Floor Spring Body Size Floor Spring Body Size Floor Spring Body Size 3, suitable for fire doors Floor Spring Body Size 4, suitable for fire doors Prices for Floor Springs complete with Stainless Steel cover ADDITION FOR DIFFERENT FINISHES Polished Stainless Steel Cover or Polished Brass Cover For hold open options 90º or 105º please contact the office

52 DOOR CONTROLS F Catalogue Ref 51 Door Control Description Price Type Per Unit ACCESSORIES FOR MECHANICAL CLOSERS DC190 Standard Arm - supplied as standard with 240 door closers DC191 Hold Open Arm DC199 Special Arm for Fire Doors - supplied as standard with 335 door closers DC194 Sliding Arm - supplied as standard with 250 door closers A152 Hold Open device for use with DC194 and DCG195 Sliding Arms 9.51 A153 Damper device for use with 194 and DCG195 Sliding Arms DC130 Flat Mounting Plate DC102 Metal Profile Mounting Plate DC113 Angle Mounting Plate DC106 Flat Mounting Plate DC107 Angled Mounting Plate DC104 Mounting Plate ACCESSORIES FOR FD SYSTEMS FD100 Accessory to be used for FD systems Closing Side FD101 Carry Bar to be used for FD systems DC103 Mounting plate for fitting onto door frame single DC109 Mounting plate for fitting onto door frame double doors DC105 Mounting plate for single/double doors A140 Connection box for DC Electro-mechanical hold open device for FD systems ACCESSORIES FOR FLOOR SPRINGS SINGLE ACTION DOORS AC 583 RH/LH bottom arm in steel 36mm offset for Italian spindle AC 384 RH/LH top pivot 36mm offset AC 606 Kit for single action doors (AC AC 384) reversible ACCESSORIES FOR FLOOR SPRINGS DOUBLE ACTION DOORS AC 115 Reversible double action bottom arm in steel for Italian spindle AC 375 Double action top pivot in steel, suitable for fire doors AC 8 Double action top pivot in aluminium AC 605 Kit for double action doors (AC 8 + AC 115) SPINDLES FOR FLOOR SPRINGS AC 340 Italian Spindle standard 5.85 AC 341 Italian Spindle +5mm AC 342 Italian Spindle +10mm For other different size accessories / spares please contact the office PIVOTS & EMERGENCY DOOR STOP * DS-6 Emergency Door Stop - when released allows door to swing both ways EP5-J Centre hung double action pivot set for doors up to 56kg /4 Centre hung double action pivot set for doors up to 90kg Only available in satin chrome finish * For use with centre hung double action pivots - converts from double action to single action

53 G ASSURE PANIC HARDWARE 52 Catalogue Ref Unit Description Price Type Per Unit PANIC ESCAPE SASH LOCK - SINGLE DOORS ASSURE 1520R Bar Panic Bar including 1520R Escape Sash Lock and fixings ASSURE 1520L Bar Panic Bar including 1520L Escape Sash Lock and fixings Supplied with lockcase and strike; blind rose in lieu of handle with panic bar Additional door furniture including cylinder must be specified separately Push plates are supplied standard length 800mm and can be cut to size on site Split Follower lockcase. Follower handing must be specified. Latchbolt is reversible EMERGENCY ESCAPE SASH LOCK - SINGLE DOORS ASSURE 1520R Pad Push Pad including 1520R Escape Sash Lock and fixings ASSURE 1520L Pad Push Pad including 1520L Escape Sash Lock and fixings Supplied with lockcase and strike; blind rose in lieu of handle with push pad Additional door furniture including cylinder must be specified separately Split Follower lockcase. Follower handing must be specified. Latchbolt is reversible PANIC LATCH - SINGLE DOORS ASSURE 8761 Bar Panic Bar including 8761 Emergency Nightlatch and fixings Supplied with lockcase and strike; blind rose in lieu of handle with panic bar Additional door furniture including cylinder must be specified separately Push plates are supplied standard length 800mm and can be cut to size on site Other variants available: ASSURE 8762 Bar; ASSURE 8759 Bar EMERGENCY LATCH - SINGLE DOORS ASSURE 8761 Pad Push Pad including 8761 Emergency Nightlatch and fixings Supplied with lockcase and strike; blind rose in lieu of handle with push pad Additional door furniture including cylinder must be specified separately Other variants available: ASSURE 8762 Pad; ASSURE 8759 Pad PANIC LATCH - DOUBLE DOOR CONFIGURATION (Plain and rebated meeting stiles) ASSURE 8761D Bar Panic Bar variant incl 8761 lockcase, Packing Pieces & fixings - for active leaf ASSURE 200 Bar Panic Bolt / 800mm Length Bar / 2 locking points - for inactive leaf Both units above must be specified and fitted together to conform to BS EN 1125:2008 Push plates are supplied standard length 800mm and can be cut to size on site; Latchbolt reversible Other variants available: ASSURE 8762D Bar; ASSURE 8759D Bar EMERGENCY LATCH - DOUBLE DOOR CONFIGURATION (Plain and rebated meeting stiles) ASSURE 8761D Pad Push Pad variant incl 8761 lockcase, Packing Pieces & fixings - for active leaf ASSURE 200 Pad Panic Bolt / Push Pad Version / 2 locking points - for inactive leaf Both units above must be specified and fitted together to conform to BS EN 179:2008 Latchbolt reversible without opening lockcase Other variants available: ASSURE 8762D Pad; ASSURE 8759D Pad For rebated double doors mm, for Modular locks mm, for Modular locks mm, for Modular locks Strike Plate for rebated doors This strike is used in addition to the Modular lock rebate kit selected to ensure both doors can be operated smoothly in an emergency ADDITION FOR MICROSWITCHING Monitoring on the lockcase All prices are for finish 17 (Satin Anodised Aluminium Finish)

54

55 G ASSURE ACCESSORIES 54 Catalogue Ref Unit Description Price Type Per Unit STEEL CORE FIXING PACKS - FOR MULTI-POINT UNITS For ASSURE 200 (2-Point) For ASSURE 300 (3-Point) For ASSURE 400 (4-Point) For ASSURE 500 (5-Point) MACHINE SCREW FIXINGS - FOR MULTI-POINT UNITS For ASSURE 200 (2-Point) For ASSURE 300 (3-Point) For ASSURE 400 (4-Point) For ASSURE 500 (5-Point) ALTERNATIVE KEEPS/STRIKES - FOR MULTI-POINT UNITS For ASSURE 200 (2-Point) For ASSURE 300 (3-Point) For ASSURE 400 (4-Point) For ASSURE 500 (5-Point) SPARE STANDARD COACH SCREW FIXING PACKS - FOR MULTI-POINT UNITS For ASSURE 200 (2-Point) For ASSURE 300 (3-Point) For ASSURE 400 (4-Point) For ASSURE 500 (5-Point) SPARE STANDARD KEEPS/STRIKES - FOR MULTI-POINT UNITS Frame socket with strike Keep Outward Opening Dust Excluding Floor Socket SPARE MISCELLANEOUS ITEMS End Caps (pair) ASSURE 26mm Spindle for 1520 (1 spindle) for 44mm door thickness ASSURE 36mm Spindle for 1520 (1 spindle) for 54mm door thickness ASSURE 53mm Spindle for 8761 (1 spindle) for 44mm door thickness ASSURE 63mm Spindle for 8761 (1 spindle) for 54mm door thickness 3.48

56 EXTENSION KIT FOR 1900PE SERIES - TWO AND THREE POINT LOCKING

57 G ASSA EMERGENCY EXIT DEVICES 56 Catalogue Ref Unit Description Units Price Type Per Box Per Unit CONNECT EMERGENCY LOCKS FOR USE WITH 179 ACCESSORIES mm Emergency Sash Lock mm mm Emergency Dead Lock mm mm Emergency Nightlatch mm ACCESSORIES MUST BE USED WITH 700 SERIES CONNECT LOCKS 179A Outside plate for use with sash locks Single Inside middle Equality Act emergency handle on plate 179A Outside middle Equality Act handle on plate for use with sash locks Double Inside middle Equality Act emergency handle on plate 179B Outside plate for use with dead locks or nightlatches Single Inside middle Equality Act emergency handle on plate 179B Outside middle Equality Act handle on plate for use with dead locks Double Inside middle Equality Act emergency handle on plate or nightlatches These products have been tested to BS EN 179 and must be used together in order to achieve the CE mark Finish Satin Chrome, suits 50mm and 70mm backset only - Microswitching also available SPARE PARTS FOR 179 ACCESSORIES AND 700 SERIES CONNECT LOCKS mm distance plates spare screw pack (contains 4 screws) spare green tags sticker RH & LH included spare nipples

58 COMPLETE HINGES SUPPLIED WITH SCREWS H Catalogue Ref 57 Type Description Finish Price Per Unit JOURNAL SUPPORTED LIFT-OFF HINGES - CS4 STEEL mm x 2.4mm Hinge 57 (Bright Zinc) 4.06 with narrow leaf 11 (Polished Chrome) (Satin Chrome) (Polished Brass) (Blue-Silver Zinc-Iron) mm x 3.1mm Hinge 57 (Bright Zinc) 4.64 with narrow leaf 11 (Polished Chrome) (Satin Chrome) (Polished Brass) (Blue-Silver Zinc-Iron) mm x 3.1mm Hinge 57 (Bright Zinc) 5.34 Symmetrical/full leaf 11 (Polished Chrome) (Satin Chrome) (Polished Brass) (Blue-Silver Zinc-Iron) mm x 3.7mm Hinge 57 (Bright Zinc) 6.38 with narrow leaf mm x 3.7mm Hinge 57 (Bright Zinc) 6.84 Symmetrical/full leaf NOTE: These journal-supported hinges are supplied in 10 units (5 pairs) per box, with screws. JOURNAL SUPPORTED LIFT-OFF GRADE 304 S15 STAINLESS STEEL HINGES 3228-SS 110mm X 3.1 mm 31 (Satin Finish) with narrow leaf 32 (Polished Finish) NOTE: These journal-supported hinges are supplied in 10 units (5 pairs) per box, with screws. NOTE. Both stainless hinge finishes use 10 gauge satin stainless steel screws. Polished finish screws are not available.

59 H HINGE DOOR AND FRAME LEAVES SUPPLIED WITHOUT SCREWS 58 Catalogue Ref Type Description Finish Price Per Unit JOURNAL SUPPORTED LIFT-OFF HINGES - CS4 STEEL 3220 Door Leaf 57 (Bright Zinc) mm x 2.4mm Frame Leaf 57 (Bright Zinc) 1.85 Hinge with narrow leaf 3228 Door Leaf 57 (Bright Zinc) mm x Frame Leaf 57 (Bright Zinc) mm Hinge with narrow leaf 3248 Door Leaf 57 (Bright Zinc) mm x Frame Leaf 57 (Bright Zinc) mm Hinge Symmetrical/ full leaf Door Leaf 57 (Bright Zinc) mm x Frame Leaf 57 (Bright Zinc) mm Hinge with Dog Bolt Door Leaf 58 (Blue-Silver Zinc-Iron) 3.25 T-Shape Frame Leaf 58 (Blue-Silver Zinc-Iron) 3.60 Leaf NOTE: These journal-supported hinges are supplied in the following quantities: 3220: 300 Units (1 unit = 1 leaf) 3228: 100 Units (1 unit = 1 leaf) 3248: 100 Units (1 unit = 1 leaf) : 200 Units (1 unit = 1 leaf) : 100 Units (1 unit = 1 leaf) HINGE ACCESSORIES Catalogue Ref Type Description Finish Units Price Per Box Per Unit Steel Disc for 3220 hinge 57 (Bright Zinc) mm dia. X 1mm thick Steel Disc for 3228, (Bright Zinc) & 3288 hinges 8.5mm dia. x 1mm thick 5mm x 30mm Wood screws-high Grade Steel 57 (Bright Zinc) TFX for 3220/3228/3248/3278 and 57 (Bright Zinc) (10g x 1¼") 3288 hinges 4.5mm x 25mm Wood screws-high Grade Steel 57 (Bright Zinc) TFX for 3211 hinges

60 ASSA SOLID ELECTRIC STRIKES HIGH SECURITY I Catalogue Ref 59 Strike Description Price Type Per Unit WITH FACEPLATE E / 13 Fail locked * E / 13 Fail locked with latchbolt monitor E / 13 Fail locked with latchbolt and deadlocking monitors A / 13 Fail safe* A / 13 Fail safe with latchbolt monitor* WITH FACEPLATE E / 16 Fail locked * E / 16 Fail locked with latchbolt monitor E / 16 Fail locked with latchbolt and deadlocking monitors A / 16 Fail safe* A / 16 Fail safe with latchbolt monitor* WITH FACEPLATE E / 24 Fail locked * E / 24 Fail locked with latchbolt monitor E / 24 Fail locked with latchbolt and deadlocking monitors A / 24 Fail safe* A / 24 Fail safe with latchbolt monitor* WITH FACEPLATE E / 823 Fail locked* E / 823 Fail locked with latchbolt monitor E / 823 Fail locked with latchbolt and deadlocking monitors A / 823 Fail safe* A / 823 Fail safe with latchbolt monitor* * Strikes will fail with up to 500Kg pre-loaded side pressure. NOTE: 12V DC supplied as standard. 24V DC available as an ex-works option. Faceplates 16, 24 and 823 can be used with ASSA deadlocking latches. Faceplate 13 can be used with non-assa latch lockcases. All prices for finish 57 (Bright Zinc) N.B. The 341 and 5341 strike models have been replaced with the 331A and 5331A models. The 331A and 5331A offer the same performance level as the 341/5341 but also have additional fail safe function described above. N.B. The 141 and 5141 strike models have been replaced with the 131E and 5131E models. The 131E and 5131E models now have an improved allowance for side pressure.

61 I ASSA SOLID ELECTRIC STRIKES UNIVERSAL STRIKE RANGE 60 Catalogue Ref Strike Description Price Type Per Unit ELECTRIC STRIKE BODIES 75 Unmonitored, switchable fail locked/unlocked strike body only Monitored, switchable fail locked/unlocked strike body only NOTE: All SOLID Universal strikes operate at 12 and 24 Volts AC or DC without modification. ELECTRIC STRIKE FACEPLATES 730 Double bolt wrap-around faceplate Double bolt flat faceplate Double bolt flat faceplate Double bolt flat faceplate Lipped faceplate for use with mortice latches Flat faceplate for use with mortice latches Flat faceplate for use with mortice latches Flat faceplate for use with mortice latches Double bolt faceplate for use in SAPA Front frame sections Double bolt faceplate for use in SAPA Front frame sections Double bolt faceplate for use in SAPA Front frame sections Faceplates 730, 731, 732 and 733 are supplied finish 57 (Bright Zinc) Faceplates 740,741 and 742 are supplied finish 31 (Satin Stainless Steel) OTHER FINISHES: Not Available To specify a complete Universal strike you will need both a strike body and a faceplate, the total price for the strike is then the total cost of the two components (screws and fitting instructions are supplied with the strike bodies). WITH FACEPLATE ANSI-S 75/ANSI-S Switchable fail lock/unlock strike with faceplate to suit narrow stile Al frames /ANSI-L Switchable fail lock/unlock strike with faceplate to suit narrow stile Al frames WITH FACEPLATE ANSI-L 575/ANSI-S Monitored, switchable strike with faceplate to suit narrow stile Al frames /ANSI-L Monitored, switchable strike with faceplate to suit narrow stile Al frames Faceplates ANSI-S and ANSI-L are supplied finish 17 (Satin Anodised Aluminium) ASSA SOLID ELECTRIC STRIKES ACCESSORIES Catalogue Ref Strike Description Price Type Per Unit K Rectifier - converts SOLID DC strike for use with AC current 4.17 NOTE: Not required for ASSA SOLID Universal 75 and 575 strikes

62 ASSA SOLID ELECTRIC STRIKES MEDIUM SECURITY I Catalogue Ref 61 Strike Description Price Type Per Unit WITH FACEPLATE 5 14E / 5 Fail locked E / 5 Fail locked with latchbolt monitor A / 5 Fail unlocked A / 5 Fail unlocked with latchbolt monitor WITH FACEPLATE E / 505 Fail locked E / 505 Fail locked with latchbolt monitor A / 505 Fail unlocked A / 505 Fail unlocked with latchbolt monitor WITH FACEPLATE 10 14E / 10 Fail locked E / 10 Fail locked with latchbolt monitor A / 10 Fail unlocked A / 10 Fail unlocked with latchbolt monitor WITH FACEPLATE E / 510 Fail locked E / 510 Fail locked with latchbolt monitor A / 510 Fail unlocked A / 510 Fail unlocked with latchbolt monitor NOTES: Faceplates 505 & 510 are for use with ASSA deadlocking latches. Faceplates 5 and 10 are for use with non-assa deadlocking latches. 12V DC supplied as standard. 24V DC available as an ex-works option. All prices are for finish 57 (Bright Zinc). RETROFITTING ELECTRIC STRIKES USE AS A DIRECT REPLACEMENT FOR AN ELECTRIC STRIKE WITH THE EQUIVALENT FACEPLATE Catalogue Ref Unit Description Price Type Per Unit 510R Retrofit for 510 Faceplate - Medium Security B Blanking plate for 510 Faceplate - Medium Security R Retrofit strike plate for 730 Faceplate - Universal Strikes B Blanking plate for 732 Faceplate - Universal Strikes R Retrofit strike for 24 Faceplate - High Security B Blanking plate for 24 Faceplate - High Security 47.62

63 I CONNECT ELECTRIC STRIKES STEP 18 & 28 - ELECTRIC STRIKES FOR ASSA CONNECT HOOKBOLT DEADLOCKS & SASHES 62 Catalogue Ref Strike Description Price Type Per Unit STEP 18 WITH FACEPLATE 183A ST180A Fail locked with hookbolt monitor - left hand ST181A Fail safe with hookbolt monitor - left hand* WITH FACEPLATE 183B ST180B Fail locked with hookbolt monitor - right hand ST181B Fail safe with hookbolt monitor - right hand* WITH FACEPLATE 184A ST180A Fail locked with hookbolt monitor - left hand ST181A Fail safe with hookbolt monitor - left hand* WITH FACEPLATE 184B ST180B Fail locked with hookbolt monitor - right hand ST181B Fail safe with hookbolt monitor - right hand* *Strikes will fail with up to 500kg pre-loaded side pressure. STEP 28 WITH FACEPLATE 283 ST280A Fail locked with hookbolt AND latchbolt monitor - left hand ST280B Fail locked with hookbolt AND latchbolt monitor - right hand WITH FACEPLATE 284 ST280A Fail locked with hookbolt AND latchbolt monitor - left hand ST280B Fail locked with hookbolt AND latchbolt monitor - right hand NOTE: Step 18 and 28 strikes are supplied with 5m livvy cabling and are available in both 12V and 24VDC. Monitoring as standard to monitor the engagement of the hookbolt and deadlocking of the staple. STEAB ELECTRIC STRIKES ELECTRIC STRIKES FOR ASSA MODULAR DEADLOCKS & SASHLOCKS Catalogue Ref Unit Description Price Type Per Unit WITH FACEPLATE 625 ST670 Fail locked, monitored deadbolt release with 10m cable ST671 Fail unlocked, monitored deadbolt release with 10m cable WITH FACEPLATE 635 ST670 Fail locked, monitored deadbolt release with 10m cable ST671 Fail unlocked, monitored deadbolt release with 10m cable Compatible with ASSA Modular deadlocks and sashlocks NOTE: Supplied with 5m livvy cable. 12V DC as standard. 24V DC available as an ex-works option. All prices are for finish 31 (Satin Stainless Steel).

64 D450 SERIES EURO ELECTRIC STRIKES EURO ELECTRIC STRIKES I Catalogue Ref 63 Strike Description Price Type Per Unit WITH SHORT FACEPLATE 17E/SHORT Fail Locked - Manual Override E/SHORT Fail locked with latchbolt monitor - Manual Override A/SHORT Fail unlocked A/SHORT Fail unlocked with latchbolt monitor WITH LONG FACEPLATE 17E/LONG Fail Locked - Manual Override E/LONG Fail locked with latchbolt monitor - Manual Override A/LONG Fail unlocked A/LONG Fail unlocked with latchbolt monitor NOTES: Short Faceplates are for use with D450 Series Euro Latches - D452 D4522 Long Faceplates are for use with D450 Series Euro Sashlocks - D455 D458 12V DC supplied as standard. 24V DC available as an ex-works option. Supplied as standard with Stainless Steel faceplate

65 I ELECTROMAGNETS MAGNETS 64 Catalogue Ref Strike Description Price Type Per Unit INTERNAL SLIM LINE MAGNETS - 300kgs holding force M8000 Morticed electromagnet M8000X002 Morticed electromagnet with 'Hall Effect' monitoring INTERNAL MINI MAGNETS - 300kgs holding force M8005 Surface mounted electromagnet M8005X002 Surface mounted electromagnet with 'Hall Effect' monitoring HEAVY DUTY STANDARD MAGNETS - 600kgs holding force M8011 Surface mounted electromagnet M8011X002 Surface mounted electromagnets with 'Hall Effect' monitoring HEAVY DUTY DOUBLE MAGNETS - 2 x 600kgs holding force M8022 Surface mounted electromagnet M8022X002 Surface mounted electromagnet with 'Hall Effect' monitoring WEATHERPROOF MAGNETS - 650kgs holding force M8065 Surface mounted weatherproof electromagnet M8065X002 Surfaced mounted with 'Hall Effect' monitoring, 12V or 24VDC available All magnets are suitable for sliding and rebated doors. Dual voltage operation of 12VDC and 24VDC unless stated. See 'Electromagnets accessories' below for brackets as required. SHEARLOCK - Exceeds 1500kgs holding force M8031X002 Monitored, fail-safe locking device for metal & timber doors Dual voltage operation of 12VDC and 24VDC as standard. Armature fixings supplied are suitable for 45mm door thickness. ELECTROMAGNETS ACCESSORIES Catalogue Ref Type Description Price Per Unit BRACKETS M L - shaped supporting bracket for M M L + Z set securing brackets for M M L - shaped supporting bracket for M8011 & M M L + Z set securing brackets for M8011 & M M L - shaped supported bracket for M M L + Z set - securing brackets for M Discounts available on bulk orders of magnets and brackets

66 ELECTROMAGNETS HOLD OPEN DOOR RELEASES/DEVICES I Catalogue Ref 65 Type Description Price Per Unit DOOR RELEASE UNITS - (Hold Opens) Wall, Floor mounted and adjustable M838-A Morticed door release M838-ISU Wall mounted door release M838-IGBU Floor mounted door release M838-BW2U Floor mounted door release adjustable to wall mounting M838-BW4U Floor mounted door release, adjustable wall mounting All door releases supplied with armature plate, 24VDC/90mA and with a holding force of 80kg ELECTRIC CABINET LOCKS FOR USE ON SECURITY CABINETS, DRAWERS AND LOCKERS Catalogue Ref Unit Description Price Type Per Unit 1048 Fail locked, snap-open cabinet lock BS Fail locked, monitored snap-open cabinet lock Fail locked/unlocked unmonitored cabinet lock BS Fail locked/unlocked, monitored cabinet lock NB: Supplied with locking element, rosette, screws, washers and fitting instructions.

67 I CONNECT ELECTROMECHANICAL LOCKCASES SOLENOID HANDLE & SERIAL MOTOR LOCKS 66 Catalogue Ref Accessory Description Price Type Per Unit Solenoid Handle Nightlatch Solenoid Handle Nightlatch with Hookbolt Solenoid Handle Escape Nightlatch Solenoid Handle Nightlatch with Hookbolt Solenoid Handle Escape Nightlatch with Hookbolt Supplied with cabling, high security strike plate, as standard All prices are for finish 57 (Bright Zinc) NB: The Locktronic 8030 and 8025 locks have been replaced with the 880 and 881 SERIAL MOTOR LOCKS 810S 50 Mortice sash lockset S 50 Mortice deadlock set S 35 Mortice hookbolt - narrow profile lockset Lockset includes DAC 430 Control unit, 6 metre cabling and strike plate with integral magnet. All prices are for finish 57 (Bright Zinc). ASSA CONNECT ACCESSORIES High Security strike plate (Requires Magnet ) Strike plate ASSA Evolution with built-in magnet Magnet for Strike for use with Motor locks Spring cassette - for handle reinforcement CYLINDER ACCESSORIES Emergency thumbturn & dome Thumbturn adapter 257 (spring retained) excludes 256 set Thumbturn cylinder 716 (spring retained) - oval profile Thumbturn cylinder 716 (spring retained) - round profile ASSA CONNECT NARROW PROFILE HIGH SECURITY SETS 4559E SCD Outside cylinder plate, inside cylinder plate E SCD Outside blind rose, inside cylinder plate E SCD Outside cylinder plate, inside blind rose E SCD Outside cylinder plate and handle, inside cylinder plate and handle mm distance plate mm distance plate NB: Use Scandinavian Oval cylinders ref: XX01/02/03 Sets suit 65mm thick doors

68 SMARTAIR USING HIGH SECURITY PROXMITY MIFARE TECHNOLOGY Catalogue Ref I 67 Part Description Price Number Per Unit SCANDINAVIAN SMARTAIR LOCKCASES LS Connect 340 sashlock with strike plate, 35mm backset LS Connect 340 sashlock with strike plate, 50mm backset LS Connect 340 sashlock with strike plate, 70mm backset Supplied separately from the Smartair reader escutheons, the Connect 340 provides full functionality with the Smartair model L8V. Connect and Modular lockcases with thru hand followers can also be used, eg, 8761, 765 SCANDINAVIAN SMARTAIR READERS (ESCUTCHEONS) Smartair reader, L1S Smartair reader with cylinder plate, L2V Smartair reader with double cylinder plate, L3V Smartair reader with thumbturn, L5S Smartair reader with cylinder plate & thumbturn, L8V Smartair reader, L1S (IP 54) Smartair reader with cylinder plate, L2V (IP 54) Smartair reader with double cylinder plate, L3V (IP 54) Smartair reader with thumbturn, L5S (IP 54) Smartair reader with cylinder plate & thumbturn, L8V (IP 54) NOTE: All prices for finish 31 (Satin Stainless Steel), brass finish available upon request External versions are denoted by IP 54 rating. D-Handles as standard, L-Handle on request. SMARTAIR WALL READERS Smartair Wall Reader ST10 (IP 54), requires 12VDC Power Supply Unit (PSU) Smartair Slimline Mullion Wall Reader (IP 54), requires 12VDC PSU UPDATER - For use with Update on Card Software Updater unit - 1 per door Updater Wall Reader (Mini Updater) * The Updater and Updater Wall Reader are additional hardware for automatic updation of card changes with additional software. Power supply unit and site TCP/IP details must be obtained. SMARTAIR UPDATE ON CARD STARTER KITS Smartair Update on Card Starter Kit - up to 10 doors Smartair Update on Card Starter Kit - 30 doors Smartair Update on Card Starter Kit - 75 doors Smartair Update on Card Starter Kit - unlimited doors NOTE: All Starter Kits are supplied with Smartair Software, licence for the no of doors, Authorisation Key, Encoder, Portable Programmer, 50 Mifare 1K User Card and USB to RS232 Adapter. OFFLINE CLASSIC STARTER KITS Smartair Offline Starter Kit - up to 10 doors Smartair Offline Starter Kit - 30 doors Smartair Offline Starter Kit - 75 doors Smartair Offline Starter Kit - unlimited doors NOTE: All Starter Kits are supplied with Smartair Software, licence for the no of doors, Authorisation Key, Encoder, Portable Programmer, 50 Mifare 1K User Card and USB to RS232 Adapter. NOTE: Licences to upgrade from 10 or more doors are available upon request. Licences are only required when increasing doors from the initially purchased Starter Kit.

69 I 68 SMARTAIR SMARTAIR WIRELESS Catalogue Ref Management Description Price Systems Per Unit SMARTAIR WIRELESS (UPDATE ONLINE) KITS Smartair Wireless Starter Kit for up to 10 doors Smartair Wireless Starter Kit for up to 30 doors Smartair Wireless Starter Kit for up to 75 doors Smartair Wireless Starter Kit for unlimited doors NOTE: All Starter Kits are supplied with Smartair Software, licence for the no of doors, Authorisation Key, Portable Programmer, 50 Mifare 1K User Card and USB to RS232 Adapter. SMARTAIR WIRELESS READERS (ESCUTCHEONS) for SCANDINAVIAN LOCKCASES Smartair Wireless Reader, L1S Smartair Wireless Reader with cylinder plate, L2V Smartair Wireless Reader with double cylinder plate, L3V Smartair Wireless Reader with thumbturn, L5S Smartair Wireless Reader with cylinder plate and thumbturn, L8V Smartair Wireless Reader, L1S (IP 54) Smartair Wireless Reader with cylinder plate, L2V (IP 54) Smartair Wireless Reader with double cylinder plate, L3V (IP 54) Smartair Wireless Reader with thumbturn, L5S (IP 54) Smartair Wireless Reader with cylinder plate and thumbturn, L8V (IP 54) NOTE: All prices for finish 31 (Satin Stainless Steel), brass finish available upon request External versions are denoted by IP 54 rating. D-Handles as standard WIRELESS HUB Smartair Wireless Hub for up to 30 Wireless doors ( within 30M ) SMARTAIR WIRELESS WALL READER Smartair Wireless Wall Reader (IP 54), requires 12VDC PSU Smartair Wireless Wall Reader with Keypad (IP 54), requires 12VDC PSU HARDWARE ACCESSORIES Portable Programmer - extra or replacement Encoder - Mifare Technology, UK Plug, extra or replacement SYSTEM HARDWARE & ACCESSORIES Cover plate set, Scandinavian round, 60mm width, stainless steel finish Cover plate set, Scandinavian round, 70mm width, stainless steel finish Smartair Mifare Card 13.56MHz, 1K Smartair Mifare Card 13.56MHz, 4K Smartair Mifare Tag 13.56MHz, 1K Spindle to suit 44-50mm door thicknesses Spindle to suit 50-56mm door thicknesses NOTE: Spindle Kits greater than 56mm are available upon request DEMO BLOCKS SmartAir L1S SmartAir L8V NOTE: Demo blocks are supplied with Scandinavian lockcases as standard SMARTAIR SERVICE CHARGES Smartair software or database training, extra sessions per day Smartair hardware training, extra sessions, per day

70 SMARTAIR STANDALONE I Catalogue Ref 69 Unit Description Price Type Per Unit SMARTAIR STANDALONE STARTER KIT Smartair TS10 Standalone Starter Kit Smartair TS10 Standalone Starter Kit with shadow card NOTE: All Starter Kits are supplied with Smartair Programming card, 25 Mifare 1K User cards and emergency open unit. NB: A complete Standalone system will require a Starter Kit, lockcase and Smartair Standalone reader/wall reader. Smartair Standalone is suitable for small sites up 3 readers and 25 users. SCANDINAVIAN SMARTAIR LOCKCASES LS Connect 340 sashlock with strike plate, 35mm backset LS Connect 340 sashlock with strike plate, 50mm backset LS Connect 340 sashlock with strike plate, 70mm backset Supplied separately from the Smartair reader escutheons, the Connect 340 provides full functionality with the Smartair model L8V. Connect and Modular lockcases with thru hand followers can also be used, eg, 8761, 765 SCANDINAVIAN STANDALONE SMARTAIR READERS (ESCUTCHEONS) Smartair reader, L1S Smartair reader with cylinder plate, L2V Smartair reader with double cylinder plate, L3V Smartair reader with thumbturn, L5S Smartair reader with cylinder plate & thumbturn, L8V Smartair reader, L1S (IP 54) Smartair reader with cylinder plate, L2V (IP 54) Smartair reader with double cylinder plate, L3V (IP 54) Smartair reader with thumbturn, L5S (IP 54) Smartair reader with cylinder plate & thumbturn, L8V (IP 54) NOTE: All prices for finish 31 (Satin Stainless Steel) External versions are denoted by IP 54 rating. D-Handles are supplied as standard SMARTAIR WALL READER for STANDALONE Smartair Slimline Mullion Wall Reader for (IP 54), requires 12VDC PSU Available in silver finish only

71 I CODOOR CODELOCK 70 Catalogue Ref Unit Description Price Type Per Unit CD3500 Codelock Price is for finish 19 (Stainless Steel). No other finishes are available. Note: Each Codoor unit is supplied with two 9V lithium batteries. CODOOR ACCESSORIES V Lithium battery Codoor Components (Hub assembly): Inclu. hair and horseshoe springs Codoor Horseshoe Spring ASSA CODELOCKS Catalogue Ref Unit Description Price Type Per Unit ASSA 22CL Silver Grey ASSA 22CL Black NOTE: No other finishes available ACCESSORIES - CODELOCKS ASSA Replacement cam lock for ASSA Codelocks - standard differ ASSA Replacement cam lock for ASSA Codelocks - keyed alike Plug-in relay for use with Electromagnets - 12V Plug-in relay for use with Electromagnets - 24V Relay socket - for use with the plug-in relays 12.17

72 ACCESSORIES I Catalogue Ref 71 Accessory Description Price Type Per Unit GENERAL ACCESSORIES Exit switch with back box EA280 Concealed Door Loop (Chrome finish) - 400mm EA281 Concealed Door Loop (Chrome finish) - 500mm Surface Mount Door Loop - 400mm Surface Mount Door Loop - 600mm K Rectifier - converts SOLID DC strike for use with AC current 4.17 BATTERY BACKUP & FIRE RELAY Battery Backup 12V 7AH - 2 required for 24V supply PSU RY2 Board for retrofit to fire alarms using the standard power supplies STANDARD POWER SUPPLY UNITS V DC 1 Amp Stabilised Power Supply V DC 2 Amp Stabilised Power Supply V DC 1 Amp Stabilised Power Supply V DC 2 Amp Stabilised Power Supply PROFESSIONAL POWER SUPPLY UNITS Volt DC 3 Amp monitored PSU Volt DC 3 Amp PSU, large case + 5 fused outputs Volt DC 5 Amp PSU, large case + 5 fused outputs Volt DC 3 Amp monitored PSU Volt DC 3 Amp PSU, large case + 5 fused outputs BOLT POSITION MONITORS /15 Latchbolt switch /20 Deadbolt switch NOTE: These units require adhesive/weld fitting to the strike plate at installation SOLID 82 microswitch attachment single bolt striking plate for use with SOLID double bolt striking plate for use with SOLID NOTE: These units fit directly onto the frame striking plate. NOTE: An extra screw fixing is required if using a boxed strike plate. NOTE: Suitable for use on ASSA Modular lockcases

73 Terms & Conditions of Sale Please note: these conditions contain exclusion causes. 1. DEFINITIONS In these Conditions, the Seller means ASSA ABLOY Limited whose registered office is at School Street, Willenhall, West Midlands, WV13 3PW; Order Acknowledgement means the Seller s order acknowledgement to which a copy of these Conditions is annexed; the Purchaser means the person, firm or company from whom an order is accepted by the Seller; and Goods means any goods or replacements therefore and any services supplied by the Seller to the Purchaser under the Agreement for Sale. Minimum Carriage Paid Order Value means the minimum carriage paid order value as set out in the Seller s price list in force from time to time; Minimum Invoice Charge means the minimum invoice charge for the Goods as set out in the Seller s price list in force from time to time. 2. FORMATION AND PARTIES The Purchaser s order to the Seller is an offer to enter into a contract on these Conditions. Acceptance occurs and the contract is formed only upon the Seller despatching to the Purchaser its Order Acknowledgement. Any terms or conditions proffered at any time by the Purchaser are hereby excluded. These Conditions except as varied by express agreement in writing signed by a director or authorised person on behalf of the Seller shall be deemed to be incorporated in all contracts from time to time entered into between the Seller and the Purchaser which provide for the sale of any goods (including without limitation the Goods) by the Seller to the Purchaser. The agreements, warranties, conditions, representations and other items set out in the Order Acknowledgement and in these Conditions are together referred to in these Conditions as the Agreement for Sale and represent the complete agreement between the Seller and Purchaser with regard to the Goods and contain all agreements, warranties, conditions, representations and other terms agreed; made or relied upon by either party in connection with the Goods. A quotation by the Seller shall not constitute an offer. 3. PRICE a) The price for the Goods shall be as set out in the Seller s price list in force from time to time except as otherwise provided for herein. The Seller reserves the right by written notice given to the Purchaser before delivery of the Goods to vary the price of Goods if, after the date of the Order Acknowledgement there is any increase in the Seller s price list in respect of the same or similar description of Goods or by any amount attributable to a change in or insufficiency of the Purchaser s instructions. b) The Purchaser shall not be entitled to make any deduction from the price of the Goods in respect of any alleged rights to set off or counter-claims unless both the validity and the amounts thereof have been expressly acknowledged and admitted by a director or authorised person on behalf of c) the Seller in writing. d) The price for the Goods will be inclusive of the costs of packaging and delivery charges within the United Kingdom, subject to the Minimum Carriage paid Order Value at the relevant time. Where the net value of the Goods is less than the Minimum Carriage Paid Order Value, a surcharge of 100 per cent of such carriage costs will be imposed. e) Subject to 3 (c) above, unless otherwise stated, the price for the Goods is exclusive of the costs of packaging, freight, insurance, delivery charges and all applicable taxes, duties, tariffs and charges of any nature whatsoever imposed in any country or territory, either directly or indirectly, in respect of the sale or supply of the Goods, or payments for them. In particular, the price for the Goods is exclusive of Value Added Tax. f) Where the value of the order is less than the Minimum Invoice Charge at the relevant time, the Minimum Invoice Charge will be imposed on all orders (except in the case of cut keys). 4. PAYMENT TERMS a) Subject to satisfactory trade, bankers and other references which may be required by the Seller, and where no other terms of payment have specifically been agreed in the Order Acknowledgement or in this Condition, payment for the Goods shall be due in pounds sterling by the 25th of the calendar month following the month of issue of the Seller s invoice, which may be issued at any time after the Goods are ready for despatch or collection from the Seller s works. In the case of export orders only, unless otherwise specifically agreed in writing payment for export orders shall be by irrevocable letter of credit confirmed by a London Clearing Bank and issued under the Incoterms then in force. b) Time for payment of the price shall be of the essence of the Agreement for Sale and in the event of any payment becoming overdue, the Seller shall be entitled to charge interest at the rate of two per cent per month above the then current base rate of Lloyds TSB Bank plc which shall be calculated and accrue on a day to day basis from the date on which payment fell due until payment (whether made before or after judgement has been obtained by the Seller against the Purchaser). The Seller reserves the right to suspend further deliveries and/or to cancel any allowance of further credit in the event of any payments not being made when due, or if the Seller in its sole discretion at any time considers the financial condition of the Purchaser has ceased to justify any such terms being permitted. c) The Seller may at any time in its absolute discretion appropriate any payment made by the Purchaser in respect of Goods to such outstanding debt as the Seller thinks fit, notwithstanding any purported appropriation to the contrary by the Purchaser or the Seller. The Seller shall be entitled at any time and notwithstanding its acceptance of any order to cancel the Agreement for Sale or to postpone any delivery until payment has been received in the event that the Seller has reasonable doubts about the Purchaser s ability or willingness to pay on the due date. The Seller reserves the right at any time at its discretion and notwithstanding its acceptance of any order to demand security for payment before continuing with an order or delivering Goods or any instalment. 5. DELIVERY AND RISK a) Unless otherwise expressly provided for in the Order Acknowledgement, delivery shall take place and risk shall pass on the earliest of the following:- i) the Seller handing the Goods to the Purchaser or its agent at the Seller s premises; or ii) the Goods leaving the Seller s premises; or iii) on the eighth day following notification that the Goods are ready for despatch provided that the Seller has not exercised its right to repudiation of the Agreement for Sale pursuant to the provision of the following paragraph. If the Purchaser has failed to collect the Goods on the seventh day following notification of readiness for despatch, the Seller shall be entitled to treat the Agreement for Sale as repudiated by the Purchaser. Until the Agreement for Sale is so repudiated the Seller may, at its option either store the Goods itself or have them stored by third parties on such terms as it in its absolute discretion thinks fit. The cost of storage and any additional transportation will be added to and shall form part of the price. If the Seller elects to treat the Agreement for Sale as repudiated in accordance with this Condition it shall (without prejudice to its rights and remedies in respect of such repudiation) be entitled to sell the Goods and retain the proceeds of the sale. b) Any claim for shortage, damage or for transport surcharges should be directed by the Purchaser to the carrier within seven days of such delivery and notification of any such claim should be made to the Seller. Any period or date for delivery stated in the Agreement for Sale or elsewhere is the Seller s best estimate and is not to be deemed to be a contractual commitment. The Purchaser shall not be entitledto refuse to accept late delivery or to treat late delivery as a breach of the Agreement for Sale. c) Unless otherwise agreed in writing, Goods included in each delivery (or part delivery) shall be deemed to be sold under a separate contract. Neither failure on the Seller s part to make any delivery (or part delivery) in accordance with the Agreement for Sale, nor any claim by the Purchaser in respect of such delivery (or part delivery) shall entitle the Purchaser to reject the balance of the Goods agreed to bepurchased by the Purchaser. The Seller may at its option deliver by instalments and each instalment shall constitute a separate contract on these Conditions. d) Unless otherwise agreed in writing all export orders will be delivered f.o.b. at a British port to be notified by the Seller. e) The Seller shall not be liable for loss or damage to Goods in transit unless:- i) the Seller has agreed to effect delivery to a place other than the Seller s premises; and ii) the loss or damage occurs prior to arrival at the delivery point; and either iii) damage or shortage is reported by the Purchaser within 7 days of arrival at the delivery point; or iv) in the case of total loss, non-arrival is notified to the Seller within 14 days after despatch of advice note. f) The Purchaser shall inspect the Goods immediately upon receipt and shall (unless such inspection cannot be carried out and the delivery note is marked not examined ) subject to paragraph (g) below be deemed to have accepted the Goods as delivered. g) The Seller shall not be liable for defects or shortages discoverable on reasonable inspection unless the Purchaser notifies the Seller before the expiry of 7 days after receipt of any alleged defect or lack of conformity with the Agreement for Sale. h) The Seller shall make good shortages notified to it under paragraph (f) above as soon as reasonably practicable but shall not be liable for any other loss whatsoever arising from such shortage. i) The Seller s liability for Goods lost or damaged in transit shall in all circumstances be limited to (at the Seller s option) the repair or replacement or credit to the Purchaser of the invoice value of the Goods inquestion.

74 Terms & Conditions of Sale 6. RETENTION OF TITLE a) Until the Seller has received payment in full of all sums owed to it on any account by the Purchaser, whether arising out of this or any other contract, legal and beneficial title to the Goods shall remain in the Seller; such goods are referred to in this condition as retained goods. b) Retained goods:- i) shall be at the Purchaser s risk, insured by the Purchaser from the date of delivery at its own expense for their full replacement value against all usual risks; and kept safe in good condition and stored separately and clearly identifiable as the Seller s property and with all identifying marks intact and legible; and ii) may, subject to Condition (c) below be used or sold by the Purchaser in the ordinary course of its business on the basis that the proceeds of sale shall be held in trust by the Purchaser for the Seller absolutely. c) The Purchaser s powers of use and sale of retained goods shall terminate:- i) forthwith on notice from the Seller if the Purchaser is in default of any of its obligations under this or any other contract with the Seller or if the Seller has reasonable doubts as to the ability or willingness of the Purchaser to pay any sum to it on the due date; ii) automatically upon the occurrence of any of the following: a) if the Purchaser causes a meeting of or makes any arrangement or composition with its creditors; or b) if the Purchaser, being an individual, becomes insolvent or appears to be unable to pay a debt or to have no reasonable prospect of paying a debt (within the meaning of Section 268 of the Insolvency Act 1986); or, being a company, appears unable to pay its debts (within the meaning of Section 123 of Insolvency Act 1986); c) if there is presented a petition for the winding up of the Purchaser or for the appointment of an Administrator of its undertaking (whether it be a company or a partnership) or if the Purchaser is an individual on the presentation of a bankruptcy petition or an application for an interim order under Part VIII of the Insolvency Act 1986; or d) if the Purchaser has a Receiver, an Administrator or Administrative Receiver appointed over any of its assets or undertaking or a winding up order made against it or it goes into voluntary liquidation (otherwisethan for the purposes of bona fide reconstruction or amalgamation of a solvent company). d) The Seller may, at any time on giving prior notice, enter the Purchaser s premises for the purpose of inspecting retained goods and identifying them as the Seller s property and the Purchaser irrevocably authorises the Seller to enter upon its premises for that purpose. e) Upon suspension and revocation or determination of the Purchaser s power of sale and use under this Condition the Purchaser shall place all the retained goods in its possession or under its control at the Seller s disposal and shall be deemed irrevocably to authorise the Seller to enter upon any of the Purchaser s premises, with or without vehicles, for the purpose of removing such goods. f) The repossession of retained goods by the Seller in accordance with this Condition shall be without prejudice to all or any of the Seller s other rights against the Purchaser under the Agreement for Sale. 7. LIABILITY a) Nothing in these Conditions shall be interpreted as excluding or restricting any legal liability of the Seller under Part 1 of the Consumer Protection Act 1987 or for death or personal injury resulting from the negligence (as defined in Section 1 of the Unfair Contract Terms Act 1987) of the Seller, its employees, agents or sub-contractors or as excluding or restricting any of the Seller s legal obligations arising under Section 12 of the Sale of Goods Act 1979 (as amended). b) Subject to the provisions of sub-clause (a) above, the Seller s liability to the Purchaser in respect of the Goods shall not in any manner whatsoever (whether under law of contract, tort or otherwise) exceed either double the price actually paid by the Purchaser for that part of the Goods in question or 10 (whichever figure is greater). c) The Seller shall, in no circumstances, be liable for loss of profit, income, goodwill, or any other economic loss, or any loss arising from any claim against the Purchaser by any third party, or any consequential or indirect loss, damage or expense of any kind howsoever caused or arising. d) Save as provided in these Conditions, the Seller shall not be under any liability to the Purchaser (whether in contract tort or otherwise) for any defects in the Goods, materials supplied or workmanship performed by the Seller or for any damage, loss, death or injury resulting from such defects and the Purchaser shall indemnify the Seller against any claims in respect thereof. b) The Seller s liability for defective Goods under this warranty is limited to repairing or, at its option, replacing on an exchange basis, such Goods (or parts thereof) or crediting the Purchaser s account to the invoice value and the Purchaser shall accept such of the aforementioned remedies as the Seller shall proffer as being fulfilment of the Seller s obligation under the Agreement for Sale. c) In the event of the Purchaser becoming aware of a defect in the Goods during the Warranty Period, the Purchaser shall within 14 days of discovering such defect supply the Seller with written particulars of such defect and at the Seller s sole option either return the Goods to the Seller at the Purchaser s expense and risk or permit the Seller to inspect the same at the Purchaser s premises and use its best endeavours to provide to the Seller all necessary access and other reasonable facilities and all information, particulars and assistance required to enable the Seller to ascertain or verify the nature and cause of the defect claimed and to carry out its warranty obligations. d) The above warranty shall not apply to any defect discoverable on inspection at time of receipt or caused in whole (or in part) by any alteration or addition to the Goods (other than by the Seller) or by use or storage of the Goods in a manner contrary to any written instructions of the Seller, or for purposes for which the Goods were not designed, or by faulty installation, maintenance or repair by the Purchaser or any third party. e) The Seller shall be under no liability whatsoever to repair, replace or make good any loss, damage or defect which results from wear and tear, accident, neglect, misuse or events referred to in Condition 11 occurring after the physical delivery of the Goods to the Purchaser (or its agent). f) When any defective Goods are replaced, the provisions of this Condition shall apply to the replacement Goods for the unexpired balance of the Warranty Period, or one-half of the applicable Warranty Period referred to in sub-clause (a) above, calculated from the date of replacement whichever is the longer. g) The Purchaser shall accept the Seller s liability under Conditions 5 and 8 above in lieu of all and every condition, warranty or representation whatsoever whether express or implied by statute, common law, trade usage, custom or otherwise as to the quality or fitness for any particular purpose of the Goods. The Purchaser acknowledges that all specifications and details in catalogues, quotations and the Order Acknowledgement or any similar documents or by word of mouth and all forecasts of performances, however given, are approximate only and do not form part of the Agreement for Sale and that in respect of such specifications details and forecasts the Seller shall be under no liability nor shall the Purchaser be entitled to any remedy under the provisions of the Misrepresentation Act INSURANCE The Purchaser agrees that it is best able to estimate the extent and nature of the insurance cover suitable for its business and property from time to time and can effect at more economic rates than the Seller such appropriate insurance cover (including cover against losses, damage, costs, claims and expenses referred to in Conditions 7, 8 or 10) and the Purchaser therefore acknowledges that it is reasonable for the Seller to sell the Goods and fix their purchase price on the basis of the exclusions and limitations of liability and the indemnity set out in these Conditions. The Purchaser agrees that it will be responsible for effecting insurance cover as above mentioned as may be appropriate to its business and property including (but not limited to) any required insurance cover in respect of any loss or damage, of whatsoever kind or howsoever caused, whether by reason of the negligence of the Seller or otherwise to premises, plant or other physical property and the Seller shall have no liability in respect of any such loss or damage. 10. INDEMNITY - THIRD PARTY CLAIMS The Purchaser shall indemnify and keep indemnified the Seller against all actions, claims, costs, damages, demands and expenses or other loss arising out of a defect in the Goods (including without limitationall liabilities incurred under the Consumer Protection Act 1987) to the extent occasioned or contributed to by any act or omission of the Purchaser its servants, agents, sub-contractors or persons under its control. 8. WARRANTY a) The Seller warrants the Goods against defects in design, materials and workmanship which become apparent within the warranty period applicable to the Goods (hereinafter called the Warranty Period ) which shall be a period of twelve months (or such period as may be stipulated in the Order Acknowledgement) stipulated from the date of issue of the Sellers invoice.

75 Terms & Conditions of Sale 11. FORCE MAJEURE AND EVENTS BEYOND THE CONTROL OF THE SELLER a) The Seller shall have no liability under the agreement for Sale in respect of any failure or delay in fulfilling any of the Seller s obligations to the extent that fulfilment thereof is prevented, frustrated, impeded and/or delayed as a consequence of any force majeure and or any occurrence whatsoever beyond the control of the Seller including without prejudice to the generality of the foregoing:- i) compliance with any order, regulation request or control of any national or local authority, governmental department or other competent authority of any country whether or not legally enforceable; or ii) any delays in, or cancellations of deliveries, or provision of services by third parties or shortages of Goods, materials or parts; or iii) any strikes, lock-outs, or trade disputes whether involving the Seller s employees or others, fire, explosion, accident, calamity or civil disturbance, action of elements, national calamity, or Act of God; or iv) failure in whole (or in part) of any power or energy supply. b) The Seller undertakes however to make every reasonable endeavour within its power to overcome difficulties arising in connection therewith, but in the event of shortages of the Goods, or of available resources for their production, storage or delivery arising from any of the events or circumstances referred to in paragraph (a) of this Condition, the Seller reserves the right to allocate as it may think fit its available goods and resources between customers with whom it has contractual obligations in respect thereof and shall not be obliged to purchase any goods from third parties to make good such shortages. c) Should such contingency continue for more than three (3) months either party may (subject to the Seller repaying to the Purchaser any advance payments for undelivered goods and, where the force majeure situation has been notified by the Purchaser to the Seller, subject to the prior payment by the Purchaser to the Seller in respect of all or any part of the order already performed by the Seller up to and including the date of notification) cancel the contract without further liability to the other. 12. LETTERS PATENT The Purchaser shall promptly inform the Seller of any threatened claim as to the alleged infringement of letters patent, or other third party rights by or in connection with the Goods and shall, if so required by the Seller at the Seller s expense, take all reasonable steps to enable the Seller to defend any such claim. 13. CONFIDENTIAL INFORMATION The Purchaser shall treat all drawings, procedures, instructions, documents and other information of any kind whatsoever supplied by the Seller to the Purchaser as strictly confidential (except to the extent that any such information is available in the public domain) and shall not without the prior written consent of the Seller, disclose or part with possession of any such documents or information or extracts therefrom or copies thereof or use any such documents or information otherwise than in connection with the Goods to which they relate. 14. GOODS MANUFACTURED TO PURCHASER S SPECIFICATION a) The Seller accepts no responsibility for the accuracy of information, specifications, instructions nd/or drawings supplied by the Purchaser. b) The Purchaser shall indemnify the Seller from and against all actions, costs (including without limitation legal costs), proceedings and loss directly or indirectly arising out of any error in or omission from any such information, specifications, drawings and/or instructions, or where it is alleged that they involve an infringement of a patent, copyright, registered design or other exclusive right or the provisions of any statute, statutory instrument or regulation. 16. CANCELLATION AND AMENDMENT No cancellation or amendment to the Agreement for Sale shall be binding on the Seller unless agreed in writing by a director or other authorised person on behalf of the Seller and on the strict condition that all and any costs and expenses incurred by the Seller up to the time of the cancellation or arising out of the amendment and all loss of profits and other loss and damage resulting to the Seller by reason of such cancellation or amendment will be reimbursed by the Purchaser to the Seller forthwith. 17. ASSIGNMENT The Purchaser shall not assign, or otherwise transfer all or any of its rights, interests or obligations under the Agreement for Sale without the prior written consent of the Seller. 18. WAIVER No waiver of any of the Seller s rights under the Agreement for Sale shall be effective unless in writing signed by a Director or other authorised person on behalf of the Seller. A waiver shall apply only to the specific circumstances in which it is given and shall be without prejudice to the enforcement of the Seller s right in relation to different circumstances or the re-occurrence of similar circumstances. 19. DESIGN ALTERATIONS The Seller shall be entitled at any time to alter or change the design or finish of its products as published in the Seller s catalogues subject to reasonable prior notice of any such alteration or change beinggiven to the Purchaser. 20. ENGLISH LAW AND JURISDICTION The formation, construction and performance of the Agreement for Sale shall be governed in all respects by English Law and the Purchaser agrees to submit to the non-exclusive jurisdiction of the English Courts. 21. HEADINGS a) The headings of these Conditions do not form part of the Conditions and shall not affect the interpretation thereof. b) Each of the Conditions and each paragraph hereof shall be construed as a separate condition. Should any provision hereof be found to be invalid or unenforceable or an unreasonable restriction of the Seller s liability then such provision shall apply with such modification as may be necessary to make it valid and effective. 22. NOTICES Notice under these Conditions shall be properly given if in writing and sent by first class post, telex or facsimile to the address of the intended recipient as stated in the Contract or to such address as the Purchaser and Seller from time to time notified to each other as their respective addresses for service and shall be deemed served in the case of postal notice on the expiry of 48 hours from time of posting, in the case of telex on the recording of the answer back code on the senders machine and in the case of facsimile, on completion of transmission by the sender. 15. HEALTH AND SAFETY The Purchaser agrees to pay due regard to any information or advice relating to the use of the Goods which the Seller may at any time furnish to it and agrees that before the Goods are used it will, if requested by the Seller, furnish the Seller with a written undertaking to take any steps which the Seller may specify with a view to ensuring that the Goods will be safe and without risk to health when used.

76 Notes

77 Web: ASSA ABLOY Limited, School Street, Willenhall, West Midlands WV13 3PW t: ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.