Table of Contents. Standard Deadbolts... Deadbolt Specifications & Strikes... Knobs... Levers... Handlesets... Interior Assemblies...

Transcription

1 Residential Locksets Pricing & Specification Guide Rev 1.0 March, 2015

2 Table of Contents Standard Deadbolts... Deadbolt Specifications & Strikes... Knobs... Levers... Handlesets... Interior Assemblies Key Services, Cylinders & Accessories Copper Creek Finishes Latches & Strikes Loose Part Packs... 18

3 Copper Creek Hardware Limited Warranty Mechanical Warranty Copper Creek (CCI) offers a mechanical warranty for all Copper Creek Residential hardware that covers mechanical defects in material and workmanship. The warranty does not cover misuse, abuse, finish defects, damage caused by poor installation or failure to read installation instructions. Copper Creek will not be held liable for any and all indirect or incidental costs, punitive or consequential damages, arising from the sale, abuse, or misuse of Copper Creek locksets. All warranties are for the original purchaser from the date of purchase as long as the original user occupies that residence: Copper Creek Locksets carry a lifetime mechanical warranty. Finish Warranty Copper Creek (CCI) offers a finish warranty for all Copper Creek residential hardware that covers finish blemishes and tarnish caused by natural environmental elements including sunlight, salt air, and humidity. The warranty does not cover damages from paints, cleaners, chemicals, scratches, abrasions, or installation in nonresidential buildings and applications. All warranties are to the original purchaser from the date of purchase as long as the original user occupies that residence: Copper Creek Locksets carry a ten (10) year warranty on standard finishes, and lifetime warranty on PVD finish. Additional Warranty Terms, Conditions, and Claims The purchaser of Copper Creek Hardware agrees to the following additional terms and conditions: Copper Creek (CCI) makes no other warranty, either expressed or implied, other than the above stated Mechanical and Finish warranties. CCI s maximum liability is limited to the original purchase price of the hardware. CCI is not responsible or liable for changes or alterations to our products by any 3rd party. CCI reserves the right to make improvements or changes to the specifications and designs of our products without obligation to incorporate those improvements or changes on previously manufactured products. All warranty claims must be made in writing or by telephone directly to CCI from the original purchaser or customer where the locks were first sold to validate the claim. Products proven defective in the warranty period should be returned freight prepaid to Jefferson Avenue, Murrieta, CA The product will either be repaired, replaced, or the purchase price returned to the original purchaser. Return freight and or cartage costs are the responsibility of the original purchaser. 02

4 Copper Creek Deadbolt Pricing STANDARD DUTY GRADE3 DEADBOLT DB2400 Series SS TB AB AN BC Case Dimensions PB PS Qty Lbs DB2405 One Sided quote quote quote quote quote quote DB2410 Single Cylinder DB2420 Double Cylinder DB2405SS 9x8x6 ADA Turn piece DB2410SS ROUND CONTEMPORARY GRADE3 DEADBOLT DBR2400 Series LxWxH Case Dimensions SS TB AB AN BC PB PS Qty Lbs DBR2410 Single Cylinder DBR2420 Double Cylinder LxWxH 14x12x5 Concealed Screws, ADA Turn piece DBR2410SS SQUARE CONTEMPORARY GRADE3 DEADBOLT DBS2400 Series Case Dimensions SS TB AB AN BC PB PS Qty Lbs DBS2410 Single Cylinder DBS2420 Double Cylinder LxWxH 14x12x5 Concealed Screws, ADA Turn piece DBS2410SS HEAVY DUTY GRADE2 DEADBOLT DB5400 Series Case Dimensions SS TB AB AN BC PB PS Qty Lbs DB5410 Single Cylinder DB5420 Double Cylinder Concealed Screws, ADA Turn piece Available May/15 03 DB5410SS LxWxH 13x12x6

5 ANSI Grade Latch Strikes Cylinder Door Prep Door Thickness UL LISTED DEADBOLT SPECIFICATIONS DB5410 DB2410 DBR2410 & DBS2410 Grade2 Grade3. Grade3. Steel adjustable round corner faceplate (RCL) standard. Square corner or Drivein (RFL) optional with no upcharge. DB5410 packed with 11/8 x 23/4 round corner (RCS) standard. Others available. Copper Creek Deadbolt Specifications Solid brass, 5 pin KW1 std. C or Weiser optional. 1 edge bore, 1 x 21/4 latch mortise std. 1 edge bore for RFL. 21/8 cross bore either 23/8 or 23/4 backset. DB2410 dual packed with round corner (RCS) plus Full Lip strikes (DS16 & DS26). Others available. Minimum 13/8 Maximum 13/4. Thick door kit available for up to 21/4 door. PTTHKDOORDB sold as a part ( $7.00 list) Meets 20 minute UL with UL Latch $5.95 list price adder. See page 17 for details. 90 minute UL available. ADA Compliant. Heavy Duty Grade2 Deadbolt Strike Options PTDS34FL 35/8 x 11/4. $2.70 list adder with deadbolt or as a part. Std. Duty Grade3 Deadbolt Strike Options PTDS02 23/4 x 11/8. $1.30 list adder with deadbolt or as a part. PTDS34 35/8 x 11/4 $2.70 list adder with deadbolt or as a part. PTDS024H 23/4 x 11/8 $2.40 list adder with deadbolt or as a part. PTDS064H 23/4 x 11/8 $2.40 lilst adder with deadbolt or as a part. Std. with DB5410. PTDS06 23/4 x 11/8. $1.30 llist adder with deadbolt or as a part. PTDS26 21/4 x 1 $1.30 list adder with deadbolt or as a part.std. with 2400s. PTDS16 21/4 Full Lip $1.30 list adder with deadbolt or as a part Std. with 2400s. 04 PTSTBP4H 23/4 x 11/8 Reinforcing Plate for DS024H and DS064H. $1.20 list if ordered as a part. Std. with DB5410.

6 Copper Creek Knob Pricing STANDARD DUTY GRADE3 KNOBS Case Dimensions BALL (BK) SS TB AB AN BC PB PS Qty Lbs LxWxH BK2020 Passage BK2030 Privacy BK2040 Entry x14x8 BK2050 Storeroom BK2090 1/2 Dummy x6x6 Ball Knob COLONIAL (CK) SS TB AB AN BC PB PS Qty Lbs LxWxH CK2020 Passage CK2030 Privacy x14x8 CK2040 Entry CK2090 1/2 Dummy x6x6 Colonial Knob EGG (EK) SS TB AB AN BC PB PS Qty Lbs LxWxH EK2020 Passage EK2030 Privacy x14x8 EK2040 Entry EK2090 1/2 Dummy x6x6 Egg Knob 05

7 ANSI Grade Grade3 Copper Creek Knob Specifications KNOB SPECIFICATIONS Rosette Decorative 23/8. Latch Steel adjustable round corner faceplate (RCL) standard. Square corner or Drivein (RFL) optional with no upcharge. Strikes Full lip round corner (RCS) standard. Extended full lip available (see page 19). Keys Standard bow nickel plated key. Cylinder 5pin KW1 std. Schlage C or Weiser optional. Door Prep 1 edge bore, 1 x 21/4 latch mortise std. 1 edge bore for RFL. 21/8 cross bore either 23/8 or 23/4 backset. Door Thickness Min.13/8 Max. 13/4 UL LISTED Passage and entry functions meet 90 minute UL rating with UL latch $5.95 list price adder. Heavy Duty U.L. Latchbolt Strikes PTLS12 23/4 x 11/8. $2.50 list adder with lockset or as a part. Standard Duty Latchbolt Strikes PTLS06 & PTLS16U.L. 21/4 full lip strike. LS06 $1.30 list as part, no upcharge with lockset. LS16U.L. $1.90 with lockset or as a part. PTLS22 ASA 47/8 x 11/4. $6.00 list adder with lockset or as a part. PTLS06E 21/4 extended full lip. $2.50 list with lockset or as a part. TEMP LOCKS (PTTLUNIV Parts discount applies) Qty Price PTTLUNIV Universal Temp lock, KW1 keyway, Keyed to accept any combination of 6 & 7 cut key All temp locks configured with round corner latch and full lip strike. Other key bitting combinations available, Call for details 06 Mill Steel Temp Lock

8 Copper Creek Lever Pricing Introducing Copper Creek Contemporary Levers Sleek smooth designs. Concealed screws for clean contemporary look. Heavy duty torque springs. Solid die cast rosettes and handles. CONTEMPORARY GRADE3 LEVERS CASE DIMENSIONS VERONA (VL) SS TB AB AN BC PB PS Qty Lbs LxWxH VL2220 Passage x18x8 VL2231 Push Button Privacy VL2290 1/2 Dummy x10x7 Verona Lever Passage Shown MODERN (ML) SS TB AB AN BC PB PS Qty Lbs LxWxH ML2220 Passage x18x8 ML2231 Push Button Privacy ML2290 1/2 Dummy x10x7 07 Modern Lever Pushbutton Privacy Shown

9 Copper Creek Lever Pricing STANDARD DUTY GRADE3 LEVERS CASE DEIMENSIONS GEORGIA (GL) SS TB AB AN BC PB PS Qty Lbs LxWxH GL2220 Passage GL2230 Privacy GL2231 Push Button Privacy x17x7 GL2240 Entry GL2290 1/2 Dummy x10x7 Available Spring 2015 Georgia Lever WAVERLIE (WL) SS TB AB AN BC PB PS Qty Lbs LxWxH WL2220 Passage WL2230 Privacy WL2231 Push Button Privacy x17x7 WL2240 Entry WL2290 1/2 Dummy x10x7 Specify handing on 1/2 Dummy function Waverlie Lever JAYNE (JL) SS TB AB AN BC PB PS Qty Lbs LxWxH JL2220 Passage JL2230 Privacy JL2231 Push Button Privacy x17x7 JL2240 Entry JL2290 1/2 Dummy x10x7 08 Jayne Lever

10 Copper Creek Lever Pricing STANDARD DUTY GRADE3 LEVERS Case Dimensions AVERY (AL) SS TB AB AN BC PB PS Qty Lbs LxWxH AL1220 Passage * * * * * AL1230 Privacy * * * * * AL1231 Push Button Privacy * * * * * * x15x7 AL1240 Entry * * * * * * AL1241 Push Button Entry * * * * * * AL1290 1/2 Dummy * * * * * * x10x7 Avery Lever DALEY (DL) SS TB AB AN BC PB PS Qty Lbs LxWxH DL1220 Passage * * * * * * DL1230 Privacy * * * * * * DL1231 Push Button Privacy * * * * * * x15x7 DL1240 Entry * * * * * * DL1241 Push Button Entry * * * * * * DL1290 1/2 Dummy * * * * * * x10x7 Daley Lever Erin (EL) SS TB AB AN BC PB PS Qty Lbs LxWxH EL1220 Passage * * * * * EL1230 Privacy * * * * * EL1231 Push Button Privacy * * * * * * x15x7 EL1240 Entry * * * * * * EL1241 Push Button Entry * * * * * * EL1290 1/2 Dummy * * * * * * x10x7 09 Erin Lever

11 Copper Creek Lever Specifications ANSI Grade Rosette Latch Contemporary Exceeds Grade3, 200,000 cycles. Decorative cookie cutter 21/2 with concealed screws. LEVER SPECIFICATIONS Standard Duty Decorative 23/8 on Georgia and Waverlie Plain 23/8 Jayne, Avery Daley, and Erin Steel adjustable round corner faceplate (RCL) standard. Square corner or Drivein (RFL) optional with no upcharge. Strikes Full lip round corner (RCS) standard. Extended full lip available (see page 19). Cylinder Not Applicable 5pin KW1 std. C or Weiser optional 1 edge bore, 1 x 21/4 latch mortise std. 1 edge bore for RFL. 21/8 cross bore either 23/8 or 23/4 Door Prep backset. Door Minimum 13/8 Maximum 13/4. Thickness Handing Nonhanded and reversible UL LISTED Passage and entry functions meet 90 minute UL rating with UL latch $5.95 list price adder. ADA compliant. Meets pushbutton lock & emergency egress requirements on 1231 and Heavy Duty U.L. Latchbolt Strikes PTLS12 23/4 x 11/8. $2.50 list adder with lockset or as a part. Standard Duty Latchbolt Strikes PTLS06 & PTLS16U.L. 21/4 full lip strike. LS06 $1.30 list as part, no upcharge with lockset. LS16U.L. $1.90 with lockset or as a part. PTLS22 ASA 47/8 x 11/4. $6.00 list adder with lockset or as a part. PTLS06E 21/4 extended full lip. $2.50 list with lockset or as a part. 10

12 Copper Creek Handleset Specifications Chandler (CD) Morgan (MG) Lauren (LN) Ashton (AT) Fashion (FZ) Heritage (HZ) Colonial (CZ) HANDLESET SPECIFICATIONS Solid Forged Brass Latches Latches are part of the Handleset interior trim assembly. See page 13. Solid Die Cast Strikes Strikes are part of the Handleet interior trim assembly. See page 13. Solid brass, 5 pin KW1 std. C or Weiser Cylinder Zinc 5 pin KW1 std. optional. Door Prep Thickness Handing 1 edge bores, 1 x 21/4 latch mortises std. 1 edge bores for RFL option. 21/8 cross bores either 23/8 or 23/4 backset. 51/2 hole spacing for thumb latch and deadbolt latch. Minimum door thickness 13/8 Maximum 13/4. Thick door kit for up to 21/4 thick doors available. PTTHKDOORHS sold as a part ($15.00 list) Non handed designs. UL LISTED Meets 20 minute UL rating with U.L. latches. $11.90 list price adder on Interior Assembly. See next page for ordering codes and details. 11

13 Copper Creek Handleset Pricing SOLID FORGED BRASS HANDLESETS Case Dimensions CHANDLER (CD) SS TB AB AN BC PVD PS Qty Lbs LxWxH CD4610 Active CD4690 Dummy x21x7.5 MORGAN (MG) SS TB AB AN BC PVD PS Qty Lbs LxWxH MG4610 Active MG4690 Dummy x21x7.5 LAUREN (LN) SS TB AB AN BC PVD PS Qty Lbs LxWxH LN4610 Active LN4690 Dummy x21x7.5 ASHTON (AT) SS TB AB AN BC PVD PS Qty Lbs LxWxH AT4610 Active AT4690 Dummy x18x7.5 SOLID DIE CAST HANDLESETS Case Dimensions COLONIAL (CZ) SS TB AB AN BC PB PS Qty Lbs LxWxH CZ2610 Active CZ2690 Dummy x17x7.5 HERITAGE (HZ) SS TB AB AN BC PB PS Qty Lbs LxWxH HZ2610 Active HZ2690 Dummy x17x7.5 FASHION (FZ) SS TB AB AN BC PB PS QTY LBS LxWxH FZ2610 Active FZ2690 Dummy x17x7.5 Note: Above prices are for the exterior handleset only. Interior knob and lever options are sold separately. See page 13. Each Copper Creek handleset style will accommodate any of the knob and lever styles. A C A Dimensions (in Inches) Cross Bores on Center CD MG LN AT FZ HZ CZ 51/2 51/2 51/2 51/2 51/2 51/2 51/2 B D E B C D Plain Latch to Thrubolt on Center Deadbolt Rose (H) (W) Main Escutcheon (H) (W) 91/16 91/16 91/16 91/16 87/16 87/16 87/16 n/a n/a 19 3 n/a n/a 105/8 3 n/a n/a 11 31/8 41/8 29/16 51/2 31/8 31/2 25/8 41/2 25/8 31/2 23/8 43/8 23/4 E Overall Handleset (H) / /8 25/8 41/8 3 F Lower Rose (H) (W) n/a n/a /2 19/16 23/8 17/ /2 29/16 15/8 27/16 17/8 12 F

14 Copper Creek Handleset Trim Specifications Handleset interior trims work with all Copper Creek handlesets. The interior assembly contains the knob or lever of choice, the standard deadbolt turnpiece by SKU, both latches and stirkes matching the interior finish, and all assembly screws. Note no substitutions on turnpieces. Square contemporary turn piece standard when selecting Verona lever trim. Round contemporary turn piece standard when selecting Modern lever trim. BK2810SS trim shown Round turnpiece standard when selecting any standard duty knob or lever trim. Contemporary Trim Styles Available Verona (VL) Ball (BK) Standard Duty Knob and Lever Trim Styles Available Georgia (GL) Avery (AL) Colonial (CK) Daley (DL) Waverlie (WL) Modern (ML) Egg (EK) Erin (EL) Jayne (JL) UL LISTED 13

15 * Copper Creek Handleset Trim Pricing CONTEMPORARY LEVER HANDLESET TRIMS Case Dimensions Order # Function SS TB AB AN BC PB PS Qty Lbs LxWxH VL2810 Active VL2890 Dummy ML2810 Active ML2890 Dummy STANDARD DUTY KNOB/LEVER HANDLESET TRIMS Note: Waverlie lever (WL) Handleset Trims are Handed left or right. Handing is always determined from the outside of the door as shown in the illustration below. 15x15x7 Case Dimensions Order # Function SS TB AB AN BC PB PS Qty Lbs LxWxH BK2810 Active BK2890 Dummy CK2810 Active CK2890 Dummy EK2810 Active EK2890 Dummy AL1810 Active AL1890 Dummy DL1810 Active DL1890 Dummy EL1810 Active EL1890 Dummy GL2810 Active GL2890 Dummy JL2810 Active JL2890 Dummy *WL2810 Active *WL2890 Dummy x11x7 Hinges On the left = Left Hand Swing Hinges On the right = Right Hand Swing Outside of door Outside of door 14 HANDLESET TRIM SPECIFICATIONS Compatible All trims fit all Copper Creek Handlesets. Latches Strikes Door Prep Thickness Steel adjustable round corner faceplate (RCL) standard. Square corner or Drivein (RFL) optional with no upcharge. Latches ship with the interior assembly. Latchbolt strike is full lip round corner (RCS) standard. Extended full lip strike optional page 19. Deadbolt strike 21/4 x 1 RCS (DS26). Other deadbolt strikes optional (see page 17). 1 edge bores, 1 x 21/4 latch mortises std. 1 edge bores for RFL option. 21/8 cross bores either 23/8 or 23/4 backset. 51/2 hole spacing for thumb latch and deadbolt latch. Minimum door thickness 13/8, Maximum 13/4. Thick door kit for up to 21/4 door thickness available part # PTTHKDOORHS. Handing Waverlie is handed, specify left or right when ordering. All others are non handed designs.

16 Copper Creek Keying Services & Parts Accessory Description Part # List Price CYLINDER KEYING SERVICES Keyed Alike (KA) Builder Keying (BK) Master Keying (MK) BuilderMaster Keying (BMK) GrandMaster Keying (GMK) Maison Keying (MAIS) PTKA001 PTBK001 PTMK001 PTBMK001 PTGMK001 PTMAISON $1.20/cyl. $2.50/cyl. $2.00/cyl. $3.00/cyl. $5.00/cyl. $5.00/cyl. Accessory Description Part # Qty List Standard Copper Creek Key Blank. PTCCKB01 < 250 > 250 $0.65 $0.60 Do Not Duplicate Copper Creek Key Blank. PTCCKB01DND 1 $1.00 Premium Large Bow Copper Creek Key Blank. PTCCKB04 < 250 > 250 $0.75 $0.67 Schlage C 6pin Key Blank. PTCCKB01C (5 pin) PTCCKB01C6 (6 pin) < 250 > 250 $0.65 $0.60 Cut keys: Standard Cut Key. Cut Master Key. Cut Builder Key. PTCCKC01 PTCCMK01 PTCCBK01 1 $0.92 Standard Copper Creek Keying Kit. PTKEYKIT2 1 $ Schlage C Keying Kit. PTKEYKITC 1 $ Weiser Keying Kit. PTKEYKITW 1 $ Blue Key Punch Copper Creek KW1 Key. Blue Key Punch Schlage C Key. PTPunchKW PTPunchSC 1 $ KW1 Pin Description Part # Qty List 15 #1 Bottom Pin #2 Bottom Pin #3 Bottom Pin #4 Bottom Pin #5 Bottom Pin #6 Bottom Pin #7 Bottom Pin Standard Top Driver Pin #1 Master Pin #2 Master Pin #3 Master Pin #4 Master Pin #5 Master Pin #6 Master Pin PTBP172 PTBP195 PTBP218 PTBP241 PTBP264 PTBP287 PTBP310 PTTP170 PTMP023 PTMP046 PTMP069 PTMP092 PTMP115 PTMP138 #4 Builderkey ball PTBB / 500 / 500 / 500 / $22.80/ $22.80/ $22.80/ $22.80/ Schlage C Pin Description Part # Qty List #0 Bottom Pin #1 Bottom Pin #2 Bottom Pin #3 Bottom Pin #4 Bottom Pin #5 Bottom Pin #6 Bottom Pin #7 Bottom Pin #8 Bottom Pin #9 Bottom Pin #2 Master Pin #3 Master Pin #4 Master Pin #5 Master Pin #6 Master Pin #7 Master Pin #8 Master Pin #9 Master Pin PTBPC0 PTBPC1 PTBPC2 PTBPC3 PTBPC4 PTBPC5 PTBPC6 PTBPC7 PTBPC8 PTBPC9 PTMPC2 PTMPC3 PTMPC4 PTMPC5 PTMPC6 PTMPC7 PTMPC8 PTMPC9 500 / 500 / $22.80/ $22.80/

17 Copper Creek Cylinders & Accessories Accessory Replacement Cylinder Standard Keway SchlageC Keyway Weiser Keyway Finish (specify) Knob Cylinder PTKNCYL PTKNCYLC PTKNCYLW PB, SS 24 $4.60 Lever Cylinder PTLVCYL PTLVCYLC PTLVCYLW PB, SS 24 $ Deadbolt Cyl. PTDBCYL PTHSCYLC PTHSCYLW AB, AN, BC, PB, PS, SS, TB 24 $ Deadbolt Cyl. PTDBCYL5 PTDBCYL5C N/A AB, AN, BC, PB, PS, SS, TB 24 $9.10 Handleset DB Cyl. PTHSCYL PTHSCYLC PTHSCYLW AB, AN, BC, PB, PS, SS, TB 24 $9.10 Handleset Double Cyl. PTHSCYL2 PTHSCYLC2 PTHSCYLW2 AB, AN, BC, PB, PS, SS, TB 24 $18.20 Dummy Handleset Cyl PTDMYCYL N/A N/A AB, AN, BC, PB, PS, SS, TB 24 $4.60 Qty List Accessory Description Part # Qty List Knob & Deadbolt Pin Cap Lever Pin Cap. PTPC001 PTPC $12.80/bag Cylinder Plug Clip. PTPCLIP 100 $8.50/bag Pin Spring Deadbolt. Pin Spring Knob/Lever. PTSPBD01 PTSPLS $6.00/bag Deadbolt Plug Cap. PTCAP04 50 $21.30/box Deadbolt Cap Pin. PTCP $4.10/bag Deadbolt Cap Pin Spring. PTCS $4.10/bag Plug Follower Tool. PTPFTL 50 $4.30 ea Deadbolt Plug Cap Removal Tool. PTPCRT 50 $3.70 ea ReKeying and Disassembly Tool. PTRKTL 1 $5.40 ea FINISH CODES CHART Copper Creek Finish Copper Creek Finish Code Antique Brass Antique Nickel Black Lifetime Brass Oil Rubbed Bronze Polished Brass Polished Stainless Satin Stainless Tuscan Bronze AB AN BC PVD 10B PB PS SS TB US Code US5 US15A L03 US10B US3 US26 US15 US11P BHMA Code

18 Copper Creek Latches & Strikes Accessory Description Knob Lever Handleset Deadbolt List Adjustable Plain Latches RCAL Round Corner Plain Latch PTRCPL01 PTRCPL02 PTRCPL03 $5.15 SCAL Square Corner Plain Latch PTSCPL01 PTSCPL02 PTSCPL03 $5.15 RFAL Drive in Plain Latch PTRFPL01 PTRFPL02 PTRFPL03 $5.90 U.L. RCAL U.L. Round Corner PL PTULKT01 PTULKT02 PTULKT03 $6.95 Adjustable Dead Latches RCAL Round Corner Dead Latch PTRCDL01 PTRCDL02 $5.90 SCAL Square Corner Dead Latch PTSCDL01 PTSCDL02 $5.90 RFAL Drive in Dead Latch PTRFDL01 PTRFDL02 $6.40 U.L. RCAL U.L. Round Corner DL PTULKT02 PTULKT02 $6.95 Adjustable Deadbolt Latches RCAL Round Corner Deadbolt Latch PTRCBL04 PTRCBL04 $5.90 SCAL Square Corner Deadbolt Latch PTSCBL04 PTSCBL04 $5.90 RFAL Drive in Deadbolt Latch PTRFBL04 PTRFBL04 $6.40 U.L. RCAL U.L. Round Corner DBL PTULKT04 PTULKT04 $6.95 RCL SCL Face Plate adapts RFL to round or square corner faceplate latch PTRCFACEPLATE PTSCFACEPLATE $0.71 $0.71 Heavy Duty U.L. Latchbolt Strikes PTLS12 23/4 x 11/8. $2.50 with lockset or as a part. Standard Duty Latchbolt Strikes PTLS06 & PTLS16U.L. 21/4 full lip strike. LS06 $1.30 as part, no upcharge with lockset. LS16U.L. $1.90 with lockset or as a part. PTLS22 ASA 47/8 x 11/4. $6.00 with lockset or as a part. PTLS06E 21/4 extended full lip. $2.50 with lockset or as a part. Heavy Duty Deadbolt Strikes PTDS34FL 35/8 x 11/4. $2.70 with deadbolt or as a part. Standard Duty Deadbolt Strikes PTDS02 23/4 x 11/8. $1.30 with deadbolt or as a part. PTDS34 35/8 x 11/ with deadbolt or as a part. PTDS024H 23/4 x 11/ with deadbolt or as a part. PTDS064H 23/4 x 11/ with deadbolt or as a part. Std. strike with DB5410. PTDS06 23/4 x 11/8. $1.30 with deadbolt or as a part. PTDS26 21/4 x 1. $1.30 with deadbolt or as a part. Std. strike with EP & MP. PTDS16 21/4 Full Lip. $1.30 with deadbolt or as a part. Std. strike with EP & MP. 17 PTSTBP4H 23/4 x 11/8. Reinforcing Plate for DS024H and DS064H. $1.20 if ordered as a part. Std. with DB5410.

19 Copper Creek Loose Parts Packs Accessory Description Part # Finish (specify) Qty List Standard Knob or Lever Screw Pack. PTLPP001 BC, PB, SS, or TB. 12 $1.00 ea 3 Screw Pack for DS34 High Security Strike. PTLPP002 BC, PB, SS or TB. 12 $1.20 ea Screw Pack for LS22 ASA Strike. PTLPP003 BC, PB, SS. 12 $0.50 ea Std Duty Single Cylinder Deadbolt Screw Pack. PTLPP004 BC, PB, SS or TB. 12 $1.30 ea DB5410 Grade2 Deadbolt Screw Pack. PTLPP005 BC, PB, SS or TB. 12 $2.30 ea Std Duty Double Cylinder Deadbolt Screw Pack. PTLPP006 BC, PB, SS or TB. 12 $1.50 ea Handleset Deadbolt Screw Pack. PTLPP007 BC, PB, SS or TB. 12 $1.30 ea Standard Thrubolt Screw Pack. PTLPP008 AB, AN, BC, PB, PS, SS, TB 12 $1.20 ea Lengthened Handleset Thrubolt Screw (for shortened post). PTLPP009 N/A 12 $0.20 ea Solid brass Thrubolt Cap and Base Pack. PTLPP010 AB, AN, BC, PB, PS, SS, TB 12 $3.60 ea Solid Brass Handleset/double cylinder screw Pack. PTLPP011 N/A 12 $1.80 ea Die Cast Handleset/Deadbolt double cylinder screw \pack. PTLPP012 N/A 12 $1.80 ea 18

20 25859 Jefferson Avenue Murrieta, CA (951) (office) (888) (toll free) (951) (fax) Web site: