1 Degree Key System Copyright 2011, 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
2 Table of Contents Table of Contents The Degree Advantage... 1 Specifications & Features... 2 System Administration... 3 Mortise Cylinders... 4 Cams for Mortise Cylinders... 5 Rim Cylinders... 6 Large Format Interchangeable Core Mortise Cylinders Large Format Interchangeable Core Rim Cylinders... 9 Cylinders for Bored Locks...10 Cylinders for Deadbolts & Padlocks & Cylinder Finishes Series DG- Conversion Parts, Slide Block Kit & Shear Tool...12 Degree Pin Kits...13 Rosettes & Collars...14 Visual Key Control Tamper Proof Packaging...15 Key Blanks/Key Sections...16 Master Keying & Cylinder Terms...17 Construction Master Keying (21- Option)...18 KeyWizard Key Management Software...19 Architectural Specifications...20 Degree System Information Document Explanation...21 Degree System Information Document...22 On The Cover Degree Mortise Cylinder, Degree Key and Degree 6300 Series Core
3 The Degree Advantage The Degree Key System The patented Degree system from SARGENT provides the right level of security for each opening in your facility. Three levels of ANSI/ BHMA Grade 1 protection, from patented keyway to UL437 certified, secures every opening. A common key for all three levels of security enhances key control and simplifies administrative procedures. Key blanks are controlled through authorized distribution and geographical protection is available. Available for mortise, rim, component and Large Format Interchangeable Core (LFIC) cylinders, SARGENT offers the right Degree of protection for every door in your facility. Benefits Patent protection from unauthorized key duplication through 2027 New keyway family protects system integrity. from legacy systems Keys are significantly stronger than competitive systems User-friendly design with minimal components provides easy field service Availability in all existing SARGENT cylinder types provides cost-effective upgrade for SARGENT facilities Bump resistance for added protection Degree Level 1 () features a utility patented keyway and provides protection against bumping for mortise, rim and component fixed cylinders. These cylinders easily retrofit into existing hardware and are appropriate for most applications. The keys for can only open cylinders. Degree Level 2 (DG2) builds on the utility patented keyway of and adds patented side bar locking with unique angled bottom pins that provide end users with geographical exclusivity. Cylinders provide protection against bumping and picking. Because of its superior key control and patent protection until 2027, DG2 products are recommended for use in conjunction with DG3 for new installations or when retrofitting systems, including large format interchangeable core systems. Degree Level 3 (DG3) combines the utility patented keyway and side bar locking with unique angled bottom pins that provide end users with geographical exclusivity, and adds certification to UL437. They are classified as high security because of their superior resistance to physical attack and protection against unauthorized key duplication. Because of its superior key control, patent protection until 2027, and physical strength, we recommend DG3 products for new high-security installations or when retrofitting systems, including large format interchangeable core systems. SARGENT also offers anti-vandal and high security locksets that complement DG3 cylinders for those openings most vulnerable to attack. High Security Security Patented Keyway Open Conventional Absolute Control SARGENT Cylinder & Key Control Products High Security: UL437 Drill & Pick-Resistant Systems offer protection against physical attacks. Includes Degree DG3, UL-Signature, and UL-Keso. Extra Security: Protection against Controlpicking. Includes Degree DG2, Signature and Keso. Patented Keyway: Keys are protected against unauthorized duplication. Includes Degree and XC. Intermediate Open Conventional: Legacy systems whose patents Control have run out and are not protected. Limited Control 1
4 Specifications & Features Features of the Degree Key System DG2 DG3 Utility patented until 2027 X X X Key blank distribution restrictions X X X Geographic exclusivity X X Bump resistant X X X Common style pins X Unique angled bottom pins X X Convenient, simple to service X X X New keyway family and keying specifications from previous SARGENT systems X X X Can be masterkeyed with all Degree levels and LFIC X X X Certified to UL437 X Product Specifications All cylinders shall be utility patented, bump resistant and require the use of a patented key. All cylinders shall be available in any of the mortise, rim, key-in-knob/lever, auxiliary locks, padlocks or large format interchangeable core types. Degree offers three distinct security options from which facilities can select the appropriate degree of security for any door. Degree s one-key design allows the use of all three locking mechanisms within the same system to be operated with just one key. Degree provides the ultimate in key control by simplifying ordering processes and by allowing the system administrator to determine the level of protection for system components. Additional specifications are found on page 20. Product Certifications ANSI/BHMA A Grade 1 E09211 (Mortise) E09221 (Rim) E09231 (Bored Lock Cylinders) Applications Degree is recommended for installations requiring patented key control protection including protection from picking and/or drilling, all available in one locking system. Degree is ideally suited for Educational and Healthcare facilities, Industrial and Commercial buildings. 2 Keying Specifications Patents Keying Degree is a factory-based key system 6 pin cylinders furnished with two nickel silver keys per cylinder. Degree cylinders may be furnished uncombined, master keyed, or grandmaster keyed to a specific facility. Double cylinder lock sets keyed alike on both sides will get two change keys total Degree s one-key design allows the use of all three locking mechanisms within the same system to be operated with just one key Degree systems are independent and cannot be keyed into existing and/or conventional SARGENT master key systems Cross keying is not recommended. Keying Department Administration will review all requests and determine if compatible with a secured master key system UL 437 Listed Cylinders SARGENT DG3 cylinders* are UL437 Listed. UL437 sets the standard for both drilling and picking resistances. These cylinders are manufactured to include hardened drill resistant inserts in both the plug/barrel and body. UL437 High Security DG3 cylinders are recommended for doors most likely to be physically assaulted, while the use of standard and DG2 cylinders is more advantageous and less costly for interior doors. * Note: DG3 cylinder offerings include mortise, rim and bored cylinders in conventional as well as Large Format Interchangeable Core U.S. Utility Patent number 7,552,608 protects Degree keyways. Patent number 6,477,875 protects the sidebar and slider, and 6,945,082 protects the key blank, key and master key systems. Degree offers patent protection through 2027.
5 System Administration Degree System Administration All SARGENT Degree key systems must have a signed System Information Document (SID), located in the back of this catalog and available online, for each facility. The SID designates a primary systems administrator for the facility. Unless otherwise indicated by the primary systems administrator by way of a separate specific letter of authorization, all shipments for Degree product will go to the shipping address on the Systems Information Document. All key blanks are to remain in the possession of the facility and must be accounted for. Any defective, incorrectly cut or damaged key blanks must be destroyed. For Degree DG2 and DG3, specific randomized security codes will be required for each order unless the systems administrator opts out of this feature. For more information, see the Systems Information Document. Keyway Administration and Assignment All keyways will be noted on the master key system bitting list. SARGENT Keying Department Administration will assign all DG keyways. Keyways will be assigned according to facility type, geographic location and keying system specifications. All keys will ship directly to the end user. All master key systems will be registered with Keying Department Administration and all bittings will be factory created. Key Control Key control will be maintained by using the SARGENT Keying Authorization Document. For a copy, contact Keying Department Administration or visit our web site at System information and/or systems related product will be forwarded directly to the owner, unless otherwise indicated by the owner s appointed administrator. Authorized Distributors SARGENT Degree is a system-based product and is provided through authorized distribution. An authorized distributor may stock and service products upon specific written authorization from the primary system administrator of the facility. Authorized distributors who carry inventory for a specific facility s system must provide valid receipts and disbursements of all products, specifically key blanks/cut keys. All key blanks in the possession of an authorized distributor must be accounted for. Any defective, incorrectly cut or damaged key blanks must be destroyed. Refer to pages 21 and 22 for a copy of the SID and more information. 3
6 Mortise Cylinders DIM "X" 1/8" (3mm) -, DG2- & DG3- Series Mortise Cylinders For use with Mortise Locks, Exit Devices and Auxiliary Locksets Mortise Fixed Core (FC) 1-11/32" (34mm) Options Construction Master Keying (21- option) Allows use of construction keys until change key voids operation Ships with 6 master construction keys separate from change keys Removable 3/16" Disposable Construction Core (60- (5mm) option) Operate with coin or flat screw driver Easy installation Removable Core (63- option) Control key releases locking cam for removal of core 2 control keys furnished standard Removable Construction Keyed LFIC (64- option) Furnished with 6 keys and 1 control key standard Plug face dimpled for easy identification Unassembled/Uncombined Core (65- Option) and DG2 only Includes two key blanks but no pins, springs or slide When ordered with hardware, 65-DG cylinders are packed uninstalled with hardware Exposed Plug only (78- option) Exposed plug.560" (14mm) diameter For use with trim LE3/LE4 & KE3/KE4; specify 78- only when cylinder is ordered less product Supplied with standard offset cam DG 0001; optional cam 105 for use on inside of 7816/8216/9200 locks only Hotel function 7850 or 8250 hotel function mortise locks require a 50- cylinder where change keys and master keys have limited rotation that only allow latch bolt retraction #115 cam supplied standard with 50 function hotel locks & cylinders The #115 cam is supplied only with SARGENT 7850/8250 locks Guest and Master keys will only retract the latch bolt but not project or retract the dead bolt Emergency keys, ordered separately, retract or project the latchbolt and deadbolt (p/n DG7268 EMK) Available in #43 (1-3/8") and #44 (1-1/2") cylinder lengths Hotel function available with Large Format Interchangeable Core (63-), Plastic Disposable Temporary Core (60-) & Construction Core (64-) Note: 60- & 64- will retract Latch only, it will not retract the deadbolt 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-3/4" DIM X (29mm) (32mm) (35mm) (38mm) (44mm) Degree Mortise Cylinders Type Degree Level Cylinder Size Cam(s) Degree Mortise Cylinders Standard Degree Mortise Cylinders supplied with: Solid brass, 6 pin cylinder, 1-5/32" (29mm) diameter TA keyway standard see page 16 for available keyways No. 97 rosette and compression spring, when hardware is ordered less cylinder Offset cam DG-0001 standard see available cams on page 5 Factory keyed -, 41 (1-1/8"); 42 (1-1/4"); 43 (1-3/8"); 44 (1-1/2"); 46 (1-3/4") Std, 101, 104, 105, 106, 112 & 113 Exposed Plug DG Mortise Cylinders (Specify 78-) - 41 (1-1/8"); 42 (1-1/4"); 43 (1-3/8") Standard or 105 Hotel Function DG Mortise Cylinders (Specify 50-) - 43 (1-3/8"); 44 (1-1/2") 115 only How to Order DG Series Mortise Cylinders less hardware Quantity Options* Cylinder Size Cam Key Set Door#/Item# Finish Std AA1 26D Available options for Degree Mortise Cylinders are: -, DG2-, DG3-, 21-, 50-, 60-, 63-, 64-, 65- & 78- How to Order DG Series Cylinder with Hardware (8200 Mortise example) Quantity Options** Series & Function Rose/Escutcheon Lever Finish Hand Keying Detail 95 DG LN MX 15 RH AA1 ** Available options for Degree Mortise cylinders ordered with hardware are: - DG2-, DG3-, 21-, 60-, 63- & 64- (78- cylinders are determined by the function or trim specified and are not specified when ordering) 4 DIM "X" 1/8" (3mm) 3/16" (5mm) SARGENT standard cam shown Length under cylinder head Finishes available: 03, 04, 09, 10, 10B, 10BE, 10BL, 14, 15, 20D, 26, 26D DG2 & DG3 cylinders are not available as Hotel function (50-) Cylinder No
7 Cams for Mortise Cylinders Cams For Degree Mortise Cylinders* in SARGENT Keyways Cams for DG Large Format Interchangeable (Removable) Core Mortise Cylinders Standard Cam (DG-0001) STANDARD CAM DG-0001 Standard open slotted cam provided on all 40 Series -standard. Except: 16 & 92 function Mortise Locks Short Cam (-105) SHORT CAM (-105) ADAMS RITE (-101) ADAMS RITE SHORT CAM (-105) ADAMS RITE (-101) ADAMS RITE STANDARD CAM (DG-0002) FOR 92 AND 1850, FOR 92 AND 1850, 4700 SHORT 4700 (DG-2808) SHORT CAM (-104) CAM (-104) SARGENT 4370 DG FUNCTIONS DG , 4350, 4250, 16 FUNCTIONS DG , 4350, 4250, SERIES KEY INSIDE ONLY. 4516, 4150 INSIDE ONLY. Cam used with SARGENT 4516, 4150 SWITCHES (-113) DG-0002 Cam only offered on limited DG-0005 DG-0002 DG-0005 DG-0006 mortise functions 16 & 92 on the inside cylinder Hotel Cam (-115) rotation hotel function cylinder for use in 78/8250 lock sets 6300 Cams are factory installed and are not removable 6300 Cams are not sold separately Specify cam as a suffix: x 105 cam For Standard Cam: No Suffix is required SARGENT 4370 SCHLAGE "L" (-106) MISC. CAM (-112) SERIES KEY SCHLAGE "L" (-106) DG-0007 MISC. CAM (-112) DG-0008 SWITCHES (-113) DG-0007 DG-0008 DG-0006 Standard 6300 Series Cam Miscellaneous Cams* -105 Cam for inside cylinder of Mortise 16 & 92 function locks SHORT SHORT CAM CAM (-105) (-105) SHORT FOR FOR CAM 92 AND AND (-105) FOR FUNCTIONS 92 AND INSIDE 16 INSIDE FUNCTIONS ONLY. ONLY. INSIDE DG-0002 ONLY. DG-0002 Adams Rite ADAMS RITE RITE (-101) ADAMS 1850, 1850, (-101) 4700 RITE 4700 (-101) 1850, DG DG-0004 (DG-0004) ADAMS RITE (-101) Adams Rite ADAMS RITE RITE RITE SHORT Short SHORT ADAMS CAM CAM Cam (-104) RITE (-104) 4070, SHORT 4070, 4350, 4350, CAM 4250, 4250, (-104) 4070, 4516, (-104) 4516, 4350, , 4516, DG , 4350, DG , 4150 (DG-0005) SARGENT 4370 Series SARGENT 4370 Key 4370 SERIES SARGENT SERIES KEY KEY KEY 4370 Switches SWITCHES SERIES (-113) KEY (-113) SWITCHES (-113) (DG-0006) Schlage L (-106) (DG-0007) SCHLAGE "L" "L" "L" (-106) "L" (-106) SCHLAGE "L" (-106) * Order cam screws as DG-0016, if needed. Cams are unique to DG cylinders and standard SARGENT cams are not compatible Misc. Cam MISC. (-112) CAM (-112) MISC. CAM (-112) (DG-0008) MISC. CAM (-112) -115 Cam for 6300 Series 50 function locks -101 ADAMS RITE ADAMS RITE 4050, 4150, 4250, 4350, 4070, Series key switch -106 Schlage L -112 Misc. Cam 5
8 Rim Cylinders -, DG2- & DG3- Series Rim Cylinders For use with Exit Devices and Auxiliary Standard Degree Rim Cylinders supplied with: Locking Devices Solid brass, 6 pin cylinder, 1-5/32" (29mm) diameter TA keyway standard see page 16 for available keyways No. 97 rosette and compression spring, break-off screws and back plate Horizontal tail piece only 27/32" (21mm) screw pattern through-bolts to SARGENT exit devices (same as standard rim cylinders) Factory keyed Rim Fixed Core Degree Rim Cylinders Options How to Order DG Series Rim Cylinders less hardware Construction Master Keying (21- option) Allows use of construction keys until change key voids operation Ships with 6 master construction keys separate from change keys Removable Disposable Construction Core (60- option) Operate with coin or flat screw driver Easy installation Removable Core (63- option) Control key releases locking cam for removal of core 2 control keys furnished standard Removable Construction Keyed LFIC (64- option) Furnished with 6 keys and 1 control key standard Plug face dimpled for easy identification Type Degree Level Cylinder Type Degree Rim Cylinders -, 34 Rim Cylinder Unassembled/Uncombined Core (65- Option) and DG2 only Includes two key blanks but no pins, springs or slide When ordered with hardware, 65-DG cylinders are packed uninstalled with hardware Quantity Options* Cylinder Type Key Set Door#/Item# Finish 75 DG2-34 AA1 26D How to specify DG Series Cylinder with Hardware (80 Series Exit Device example) Quantity Options* Series & Function Rail Size Trim Finish Hand Keying Detail 25 DG F ETL 32D RHR AA1 * Available options for Degree Rim Cylinders are: -, DG2-, DG3-, 21-, 60-, 63-,64- & 65- Finishes available: 03, 04, 09, 10, 10B, 10BL, 14, 15, 20D, 26, 26D " (34mm) 1 8" (3mm) 1-1/16" (27 mm) 27/32" (21mm) 5 32" (4mm) 2-3/8" (60.33mm) 5 32" (4mm) 1 4" (6mm)
9 Large Format Interchangeable Core Mortise Cylinders Degree Large Format Interchangeable Cores and Cylinders For use with Mortise Locks, Exit Devices and Auxiliary Locksets DG-6300 Cylinder Core DG-60-Mortise Housing Core only (DG-6300): Solid brass, 6 pin cylinder Notes: and DG2 use the same mortise housing Available in 04 or 15 finish only DG3 cores must be used with DG3 housings to maintain UL437 listing TA keyway standard see page 16 for available keyways Factory keyed or available unassembled* for field keying (65-) Offset cam DG-0001 standard see available cams on page 5 Hotel functions (50-) available with - Order core only as: , DG or DG Housings: Solid brass, 1-5/32" (29mm) diameter Available in finishes: 03, 04, 09, 10, 10B, 10BL, 14, 15, 20D, 26, 26D Furnished with no. 97 rosette and compression spring when supplied without hardware Available in 42 (1-1/4"), 43 (1-3/8"), 44 (1-1/2"), or 46 (1/34") lengths * 65- option available for and DG2 only. Includes two key blanks but no pins, springs or slide. Options: Removable Disposable Construction Core (60- option) Mortise housing with disposable plastic core Hotel Functions After removal of temporary plastic core, housing accepts DG-6300 DG-60-Hotel function (50-) housings are available in Operates with coin or flat screw driver - only, in #43 (1-3/8") length and only for use in Sargent 78/8250 lock sets Easy installation Order as: x finish (Note: used with - Order as: -60- housing size x cam x finish 6300 cores only) DG2-60- housing size x cam x finish Emergency Master Key ordered separately,as an DG3-60- housing size x cam x finish DG7269EMK DG-63-Mortise Cylinder DG-64-Mortise Housing with Construction Core Removable Core (63- option) Mortise housing with DG LFIC Can be master or grandmaster keyed Control key releases locking cam for removal of core Available as unassembled less springs, pins and slide (65-) 2 control keys furnished standard Additional control keys for systems: DG6272CTL; control keys for DG2 and DG3 systems: DS6272CTL Order as: -63- housing size x cam x finish DG2-63- housing size x cam x finish DG3-63- housing size x cam x finish Removable Construction Keyed LFIC (64- option) Mortise housing with construction core Construction cores are keyed alike in KA keyset After removal of construction core, housing accepts DG-6300 Furnished with 6 keys and 1 control key standard Plug face dimpled for easy identification Order as: -64- housing size x cam x finish DG2-64- housing size x cam x finish DG3-64- housing size x cam x finish Hotel Functions DG-60-Hotel function (50-) housings are available in - only, in #43 (1-3/8") length and only for use in Sargent 78/8250 lock sets Order as: x finish (Note: used with cores only) Emergency Master Key ordered separately,as an DG7269EMK 7
10 Large Format Interchangeable Core Mortise Cylinders How to order 6300 Series LFIC DG mortise cylinders less hardware Quantity Options* Cylinder Size Cam Keying Detail Finish Complete Cylinder: DG-LFIC and Housing 75 DG Std AA1 26D Housing Only Std 26D LFIC Only 85 DG AA1 15 * Available options for Degree LFIC Mortise Cylinders are: -, DG2-, DG3-, 50-, 60-, 63-, & 64- Note: Cores are available in 04 & 15 finish How to Order DG Series 6300 Series LFIC Cylinder with Hardware (8200 Series Mortise Lock example) Quantity Options** Series & Function Rose/Escutcheon Lever Finish Hand Keying Detail 95 DG LE1 ML 26D RHR AA1 **Available options for Degree Mortise Cylinders are: -, DG2-, DG3-, 60-, 63- & 64-8
11 Large Format Interchangeable Core Rim Cylinders Degree Rim Large Format Interchangeable Cores and Cylinders For use with SARGENT Mortise locks, Exit Devices and Auxiliary Locking Devices Core only (DG-6300): Solid brass, 6 pin cylinder Notes: DG3 cores must be used with DG3 housings to maintain UL437 listing Available in 04 or 15 finish only TA keyway standard - see page 16 for available keyways Factory keyed or available unassembled* for field keying (65-) Horizontal tailpiece DG-6300 Supplied with backplate and 2 breakaway screws Cylinder Core Order core only as: , DG or DG Housings: Solid brass, 1-5/32" (29mm) diameter Available in finishes: 03, 04, 09, 10, 10B, 10BL, 14, 15, 20D, 26, 26D Furnished with no. 97 rosette and compression spring when supplied without hardware Screw pattern same as standard rim cylinder Available in 42 (1-1/4"), 43 (1-3/8"), 44 (1-1/2"), or 46 (1/34") lengths *65- option available for and DG2 only. Includes two key blanks but no pins, springs or slide Options: Removable Disposable Construction Core (60- option) Rim housing with disposable plastic core Order as: x finish After removal of temporary plastic core, housing accepts DG-6300 DG x finish Operates with coin or flat screw driver DG x finish DG-60-Rim Housing Easy installation Removable Core (63- option) Rim housing with DG LFIC Order as: x finish Can be master or grandmaster keyed DG x finish Control key releases locking cam for removal of core DG x finish DG-63-Rim Available as unassembled less springs, pins and slide (65-) Cylinder Control keys furnished standard Additional control keys for systems: DG6272CTL; control keys for DG2 and DG3 systems: DS6272CTL Removable Construction Keyed LFIC (64- option) Mortise housing with construction core Order as: x finish Construction cores are keyed alike in KA keyset DG x finish After removal of construction core, housing accepts DG-6300 DG x finish DG-64- Rim Furnished with 6 keys and 1 control key standard Housings with Construction Plug face dimpled for easy identification Core How to order 6300 Series LFIC DG rim cylinders less hardware Quantity Options* Cylinder Type Keyset Finish Complete Cylinder: DG-LFIC and Housing 200 DG AA1 26D Rim Housing Only D LFIC Only 95 DG AA1 15 * Available options for Degree Rim Cylinders are: -, DG2-, DG3- Note: Cores are available in 04 & 15 finish How to Order LFIC DG Series Rim Cylinder with Hardware (80 Series Exit Device example) Quantity Options** Series & Function Rail Size Trim Finish Hand Keying Detail 50 DG F ETL 32D LHR AA1 ** Available options for Degree Rim Cylinders are: -, DG2-, DG3-9
12 Cylinders for Bored Locks Fixed Core Component For use with SARGENT Cylindrical Lever, Knob Locks and Auxiliary Locksets Key-in-knob (KIK), Key-in-lever (KIL) Fixed Core (FC) How to Order DG Series Lever & Knob Cylinders less hardware Quantity Degree Level Catalog No Keyway Finish* 75, DG2 or DG3 C10-1 TA 04 Furnished factory keyed and only and DG2 are offered with the 65- option of unassembled for field keying. 65- cylinders include two key blanks but no pins, springs or slide Designations & Options for Degree Series Components SARGENT Lockset Degree Level Catalog No Finish Function 11 Line Locks, DG2 or DG3 C11-1 All functions except 50 function C11-2 Hotel function (50-) 10, 7, 7500 Line (Levers) & 6500 Locks & 88KL, 88CL, 28KL, 28NL & 28CL Exit Trims, DG2 or DG3 C10-1 C10-2 All functions except 50 function Hotel function (50-) 7, 8 & 9 Line Knob Locks 6 Line Cylindrical Locks 10, DG2 or DG3 C8-1, DG2 or DG Integralock Cylinder, DG2 or DG3 C8-2 C6-1: S&M Knob C6-1B: B Knob C for functions 04, 05, 37 All functions except 50 function Hotel function (50-) Note: All cylinders supplied with two change keys; for lock functions that have two cylinders keyed alike, only two change keys will be provided Hotel Functions (50) are not available with 9 Line knobs, 7 Line levers, 7500 Interconnected, 6500 Locks & Exit Trims. Emergency key to be ordered separately for bored locks as DG6267EMK
13 Cylinders for Deadbolts & Padlocks & Cylinder Finishes Bored Auxiliary Deadlocks For use with Bored Auxiliary Deadlocks SARGENT Lockset Degree Level Catalog No Finish Function 460 Series Deadbolt, DG2 or DG3 C460-1, DG2 or DG3 C , DG2 or DG3 C , 474, , 470, 480 Series Deadbolts, DG2 or DG3 C , 475, 485, 487, DG2 or DG3 C , & 858 Padlocks, DG2 or DG3 C and 858 padlocks Note: All keyed cylinders supplied with two change keys. For lock functions that have two cylinders keyed alike, only two change keys will be provided Only and DG2 are offered with the 65- option of unassembled for field keying. 65- cylinders include key blanks but no pins, springs or slide When hardware is ordered with 65- cylinders, it will ship uninstalled with hardware Finishes available for Mortise and Rim Cylinders* SARGENT Code ANSI/BHMA Code Finish Description Bright Brass, clear coated Satin Brass, clear coated Polished Bronze, clear coated Satin Bronze, clear coated 10B 613 Satin Bronze, oxidized and oil rubbed 10BE 613E Dark Oxidized Satin Bronze - Equivalent 10BL 614 Satin Bronze, oxidized and clear coated Bright Nickel Satin Nickel 20D 624 Statuary Dark Bronze, clear coated Bright Chrome Plated 26D 626 Satin Chrome Plated * Key-in-knob/Key-in-lever and LFIC are available 04 and 15 finishes only Note: 32 & 32D finished hardware will be supplied with 26 & 26D finished cylinders accordingly 11
14 6300 Series DG- Conversion Parts, Slide Block Kit & Shear Tool SARGENT 6300 Series Housings and KIL/KIK Locks Older 6300 series mortise and rim cylinders with long pins in the housings will need to be modified to accept 6300 Series DG- cores. KIL/KIK lock sets with removable tail pieces will require new tail pieces as shown below Series DG- Conversion Parts for 758/858 Padlocks, 11 Line (T-Zone), 10, 7, 6500 Line Note: Only existing 6300 cores with removable tailpieces can be upgraded to Degree without modifying the lock 6300 Series DG- Conversion Parts for #34 rim cylinders, 8-Line knob locks and 480 Series deadbolts Kit # is used to convert rim cylinders with long pins to accept 63-DG Series cores and series cores Kit # for 758/858 Padlock tailpiece pack Kit # for 11-Line tailpiece pack Slide Block Kit Includes fixture and staking tool for use with all DG cores, and 11- and series cores manufactured after March 2006 and standard cylinders manufactured after May 2008, simplifying top loading in the field. The kit includes: 100 slides staking block staking tool Cylinders manufactured after March 2006 will not include the box around the SARGENT logo and can be used with this kit. Additional slides available: 7 pin slides (Part # ) 6 pin slides (Part # ) 12 Kit # for DG-63- Series and Line knobs Kit # for DG-63- Series and Cam Assembly for Deadbolts Cores without a box around the word SARGENT Kit # for 10 Line and 7 Line for 6500 Series tailpiece pack (Cylinder Not Included) Shear Tool Shear Tool is used to alter older SARGENT 60-/63- mortise housings to accept 6300 Series DG cores and series cores. Altered housings will accept , DG2- and DG3- cores. Note: DG3- cores with altered housings are not UL437 listed, DG3 cores require DG3 housings to be UL437 listed For 6300 rim cylinders use Kit # Body Handle 6300 Large Format Interchangeable Core Installation Tool (432 RC) The 432 RC is a tool to assist in installing SARGENT Large Format Interchangeable (Removable) Core Mortise Housings. This tool makes it easy to thread a cylinder body into a mortise lock and can also help check the cylinder function in a lock before installing the cylinder core Order: 432 RC for the SARGENT Large Format Interchangeable (Removable) Core Installation Tool
15 Degree Pin Kits 437 Standard Pinning Kit The 437 Kit is used to pin fixed and LFIC cylinders. The heavy duty steel kit prevents pins from mixing. The kit includes: 100 each of bottom pins sizes each of control drivers sizes each of driver pins sizes each of bump resistant pins sizes sidebar springs part number DG KIK spring cover part number KIL/MRT/RIM/LFIC spring cover DG each Sidebar (LFIC only) part number DG each compression spring part number DG each compression spring (LFIC only) part number DG-0097 Tweezer Degree key gauge See pages 2 and 3 in the Technical Manual for individual pin part #s. The kit has additional empty compartments for future upgrades to DG2 and DG3 cylinders. The 437 DGM Master Kit has all pins needed for pinning, DG2 and DG3 cylinders. 437 DGM Master shown 437 DGM Master Pinning Kit The 437 DGM Master Kit includes all pins needed to re-pin, DG2 and DG3 cylinders. Kit includes all the same components as in the 437 kit, with the additional parts to service DG2 and DG3 cylinders. 10 each Side bar part number DG each slider spring part number DG each of Left, Center and Right Chisel Bottom Pins sizes 1 thru 6 See pages 2 and 3 in the Technical Manual for individual part numbers. Cylinder Spray Lubricant Degree cylinders are mechanical devices and require preventive maintenance. At a minimum, Degree cylinders should be lubricated twice a year; more if installed in extreme installations. Degree cylinders should not be exposed to chemical washes or painted. 3.0 oz aerosol part number Cylinder Spray Cleaner/Deicer: 3.0 oz aerosol part number
16 Rosettes & Collars No. 1KB Rosette No. 97 Rosette No. 90 Blocking Ring Used with 8200 Series mortise locks and No. 90 blocking rings when cylinders project from door Free spinning to protect cylinder from vandalism Consult 8200 series catalog for Rosette application details. Different collars required when used with exit devices. Consult Exits catalog for part numbers Furnished standard with 8200 Series sectional trim Cast brass, bronze or stainless steel 1-1/2" (38mm) diameter, includes compression spring Projection from door: 1KB-1 5/16" (8mm) 1KB-2 7/16" (11mm) 1KB-3 9/16" (14mm) Finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 15, 20D, 26, 26D Standard for cylinders ordered separately from hardware Standard for 4800 dead bolts and 7900 and 7800 Series mortise locks Brass, bronze or stainless steel 1-11/16" diameter (43mm), 9/32" (7mm) projection, includes compression spring Finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 15, 20D, 32, 32D Used with 1KB-2 and 1KB-3 rosettes as spacer when mortise cylinder projects from face of door as shown above Consult 8200 series catalog for Blocking ring application details Brass, bronze or stainless steel 1-3/8" (35mm) diameter; available in thickness of 1/16", 1/8", 3/16", 1/4" and 3/8" projection in 1/16" (1.6mm) increments. Specify size when ordering. Finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 15, 20D, 26, 26D Rosette Door Surface Cylinder Nut Wrench This wrench simplifies the installation and removal of mortise cylinders nuts used on 700 Series Auxiliary Control (80 Series ET Trim). Part number Blocking Ring Spring Cylinder Crosscut illustration of rosette application Cam
17 Visual Key Control Tamper Proof Packaging Visual Key Control (Stamping) To allow for easier key and cylinder identification, SARGENT offers permanent stamping of keys and/or optional cylinder concealed stamping with industry standard alpha-numeric key set symbols. All DG keys are stamped with key set symbol and DO NOT DUPLICATE as standard. All DG master and control keys are stamped with the key set symbol and the key system register # cylinders as standard, (Item B) unless alternate stamping is requested on the order. Master level keys do not include bitting numbers. Master level keys include system register numbers stamped on the first line and the standard visual key control designations on the second line (Item B). Change keys have one line for up to 7 characters for key set stamping available for permanent Visual Key Control Key and cylinder identified by industry standard alpha-numeric keyset symbols Cylinder-slide stamping available on mortise, rim, LFIC and all bored cylinders except for 8-Line and 7600 (Items C, D, & E) Core side engraving available for 8-Line and 7600 (Item F) Keyway Example system number AB1 PAT. NO. 7,552,608 DO NOT DUPLICATE Key Set Symbol to identify factory-cut key PAT. NO. 7,552,608 DO NOT DUPLICATE Example of keyset Item A Change (Day) Key Stamping Item D Item B Master Level Key Stamping Item E Item F Item C Tamper Proof Packaging For the highest level of security for the end user, tamper proof packaging is used on all Degree master keys and key blanks. This heat sealed shrink wrap identified with SARGENT Sealed For Your Security provides assurance of the integrity of the factory generated key system. 15
18 Key Blanks/Key Sections Master Key Blanks* DG 6270 TN For Multiplex Masterkey Systems (T keyway family shown) DS 6270 TN DG 6270 TDH DS 6270 TDH TN DG 6270 THM DS 6270 THM DG 6270 TD DS 6270 TD Master Sections TDH THM DG 6270 TH DS 6270 TH DG 6270 TM TD TH TM DS 6270 TM Change Key Blanks* DG 6275 TA DS 6275 TA DG 6275 TB DS 6275 TB DG 6275 TC DS 6275 TC DG 6275 TE DS 6275 TE DG 6275 TF DS 6275 TF DG 6275 TG DS 6275 TG DG 6275 TJ DS 6275 TJ DG 6275 TK DS 6275 TK DG 6275 TL DS 6275 TL * Key blanks are made of Nickel Silver and sold in boxes of 50 Degree Cut Keys DG6272CMK 21- DG6272CTL 6300s DG6272MK DG2 or DG3 DS6272CMK 21- DG2 or DG3 DS6272CTL 6300s DG2 or DG3 DS6272MK 16 Change Key Key Sections Plug Key Sections Emergency Master Keys DG6267EMK bored locks DG7268EMK mortise locks DG7269EMK 63- cylinders in mortise locks Construction Keys /DG2/DG3 6251CMK 64- /DG2/DG3 6251CTL 64- TA TB TC TE TF TG TJ TK TL TA TB Legend: TC TE TF DG = - keys only DS = DG2- & DG3- keys CMK = construction master key CTL = control key MK = master key TG TJ TK TL
19 Master Keying & Cylinder Terms SARGENT requires all orders containing Master Keying details to be submitted using the industry standard Door and Hardware Institute (DHI) ANSI/BHMA format. Key symbols used on a master keyed order require combinations of letters and/or letters and numbers. For complete details on proper structuring format of key symbols refer to: DHI Handbook, Section 8 - Finish Hardware, KEYING SYSTEMS AND NOMENCLATURE; ANSI/BHMA Standard A156.28, AMERICAN NATIONAL STANDARDS FOR KEYING SYSTEMS; or contact SARGENT for assistance at Basic Keying Terms Keys and terms Abbreviation Definition Change key CK Individual lock key Masterkey MK Operates any given quantity of cylinders with different key changes Grand Masterkey GMK Operates all individual locks already operated by masterkey(s) Great Grand Masterkey GGMK Operates all locks under the various masterkey(s) and grand master key(s) already established Emergency Key EMK Operates hotel locks having shut out feature which blocks entry by all other keys Construction Key CMK Operates all cylinders designated for a temporary period during construction Control Key CTL Key to install or remove interchangeable or removable cores Keyway KWY Broaching in a cylinder plug Key Section KWY Sidewarding on key to match broaching in plug Single Keyed SKD Cylinders operated by their change key only; not operated by any master key Examples of Master Key System Levels and Symbol Structure** Level 2 Simple Master Key Level 3 Grand Master Key A Level 4 Master Key Change Keys Grand Master Key A AA 1AA 2AA 3AA Great Grand Master Key GGM Master Key AA Master Key AB Change Keys AA1 Change Keys AB1 AA2 AB2 AA3 AB3 Grand Master Key B Master Key AA Master Key AB Master Key BA Master Key BB Change Keys AA1 Change Keys AB1 Change Keys BA1 Change Keys BB1 AA2 AB2 BA2 BB2 AA3 AB3 BA3 BB3 ** Master key system levels greater than Level 4 are not recommended. Contact SARGENT key records for additional information 17
20 Construction Master Keying (21- Option) Construction Master Keying (Lost/Wafer Design) for -, DG2- & DG3- SARGENT Degree cylinders when master keyed are offered with the convenience of construction keying when specified with the 21- option. This is not recommended with DG3 key systems or any system where strict key control and management is enforced. Construction keying simplifies the process when the building gets turned over. With this feature, the 21- cylinder is master keyed with a special construction feature in one of the chambers. The plug is prepped in two places along both sides of the same chamber containing the construction feature. This allows the construction master key to be used during the construction phases. It is highly recommended that all construction keys are collected and accounted for once the project is complete to protect the integrity of the key system. This is not recommended with DG3 key systems or any system where strict key control and management is enforced. New systems supplied with 6 construction master keys unless otherwise specified. Orders to existing key systems that require additional construction keys are to be specified and ordered separately. Orders with 21- will have all change keys shipped separately from hardware. Six construction master keys provided per system unless otherwise specified. The 21- is not available with hotel function cylinders or large format interchangeable cores (6300 series). If construction keying is required for LFIC, specify 64-DG- construction keyed cores. Wafer 18 As change key rotates, construction wafer falls into donut hole in the side of plug. Only construction wafer will fall due to hole through its center. Cutaway cylinder showing construction master key being used, putting the wafer below the shear line while key is turned. Note the two empty donut holes on either side of the chamber. Change key rotated to position for extraction. Change key inserted in cylinder putting the wafer at the shear line. Construction key inserted after wafer is trapped. Driver now extends into plug chamber. Construction key if used will not rotate.
21 KeyWizard Key Management Software Cylinders and Components SARGENT S KeyWizard 5.5 Software Package Tracks Multiple Key Systems Including Keys, Keyholders, Locations, and Hardware Information This comprehensive key management software package was developed for locksmiths and end-users to track detailed information. The program features easy to navigate, non-cluttered screens and uses a format similar to Microsoft Outlook. Features: Free Technical Support at and system upgrades for 1 year Website support at Multi-level passwords and access levels Clear, easy to read screens Manages multiple end user key systems Customized query, reporting and search capability Global searching across multiple key systems Comprehensive hardware schedules Keyholder photos and signatures for identity verification Scheduled maintenance and reminders for overdue keys and back-ups How to order for new users: Single License Version KW-SS1 Network Version KW-SSN1 Demonstration Version KW-DEMO1 How to order, if upgrading from KeyMinder*: Single License Version UP-KW-SS1 Network Version UP-KW-SSN1 *consult factory for eligibility requirements Accurate key symbol sorting Multi-level key authorizations and key deposits Network and stand-alone versions Pinning calculators Reports options including printing in a variety of formats and Cylinder and key random serial ID generator Key authorization forms that can be printed at will Editable field titles Ability to connect to a website and search for any updates Keying Data Keying data (key sets and bittings) is available for order with new or existing systems to eliminate the need for manual data entry into Key Wizard. Place order based on size of system. Part Number DLKW1 DLKW2 DLKW3 DLKW4 DLKW5 DLKW6 DLKW7 Computer System Recommendations: REQUIRED: 350 MHz processor 60 MB hard disk space Windows 7, Vista, XP, NT, ME, 2000 or 98 64MB Ram CD drive Description 1 to 50 bittings 51 to 200 bittings 201 to 1000 bittings bittings bittings bittings Over 9000 bittings RECOMMENDED For Better Performance: 500 MHz or faster 70 MB or more Windows 7, Vista, XP, NT, ME, 2000 or 98 64MB Ram CD drive BITTING LISTS Paper bitting lists provided at no charge for factory corresponding keyed orders when requested at time of hardware order. An owners letter of authorization must be attached to all purchase orders. Existing key system bittings lists are also available contact key records for more information. 19
22 Architectural Specifications Part 1 General Keying Schedule The keying schedule is just as important as the hardware schedule The key meeting requirements Who attends Example: Upon approval of the finish hardware schedule meet with the owner s representative to determine the project s keying requirements. In attendance shall be a Certified Key System Specialist. Administrative documents should be reviewed and executed at this meeting. Delivery, Storage and Handling The delivery and storage of the permanent cylinders, cores, keys, key control software Extra Material Consideration should be given to include additional permanent cylinders, key blanks and key cutting equipment, etc Part 2 Product Keying: (SARGENT Degree) All cylinders shall be SARGENT Degree. Provide utility patented cylinders that require the use of a patented controlled key. Provide bump resistant fixed core mortise and rim cylinders standard. Except where otherwise specified all locksets, exit devices and cylinders shall be of the same manufacturer. Provide recessed cylinder collars for all mortise and rim cylinders. Establish a new multilevel factory designed secured master key system for this project that will meet the owners requirements for this project and future expansion. All keying shall be done at the factory where permanent records will be established and maintained. Manufacturer to have a minimum of 10 years experience designing secured master key systems and have a published security policy. Provide a 6 pin multilevel master key system which is comprised of patented controlled keys, security and high security cylinders that can all be operated by ONE key of the highest level. Geographical exclusivity shall be provided for all security and high security cylinders. Provide certified cylinders meeting ANSI/BHMA A Grade 1. Provide mortise, rim and key-in-lever cylinders certified to UL437 where specified. 20 Provide construction master keying for all fixed core cylinders. Provide temporary keyed cores for all large formatted interchangeable core cylinders. Permanent keys and cores are to be delivered directly to the owner or owner s representative. Provide nickel silver keys with industry standard Visual Key Control stamping on the bow only for each permanent cut key. Furnish keys in the following quantities. 1 each top master key for the system(s) 4 each Change keys per cylinder or 10 keys per keyed alike group 2 each Control keys (if required) 2 each Master keys per master key group and/or selective master key 2 each Construction control keys (if required) 12 each Construction keys Provide 1 copy of bitting list to the owner Where specified ; provide utility patented controlled keyway cylinders that are furnished with patented keys that are only available from authorized distribution. Provide bump resistant fixed core mortise and rim cylinders standard. Where specified DG2; provide utility patented controlled keyway and side bar locking incorporating unique angled bottom pins that provide end users with geographical exclusivity. Cylinders shall be constructed to provide protection against bumping and picking. Where specified DG3; provide utility patented controlled keyway and side bar locking incorporating unique angled bottom pins that provide end users with geographical exclusivity. Cylinders shall be constructed to provide protection against bumping, picking and drilling. Provide mortise, rim and key-in-lever cylinders certified to UL437. Specified manufacturer Sargent Degree Key Control Specify Key Wizard software Part 3 Execution Care should be taken to identify the required process of turning over a patented locking system to the owner.
23 Degree System Information Document Explanation Degree Required Administrative Documents: Mandatory: all new systems will require a completed System Information Document (orders cannot be entered without this document). The fully executed original document will be kept on file at Sargent Manufacturing Subsequent order requirements: A letter of authorization will be required if the product is shipped to an address other than what s recorded on the System Information Document and/or if the address on the purchase order is different than what is listed on the System Information Document Degree DG2 & DG3 Required Administrative Documents: Mandatory: all new systems will require a completed System Information Document (orders cannot be entered without this document). The fully executed original document will be kept on file at Sargent Manufacturing Subsequent order requirements: A specific randomized security code will be required for each order unless Opt-Out has been authorized by the systems administrator If the Opt Out option is NOT selected A correct system specific (randomized) security code must be included with each subsequent order Security codes are specific to each order If the shipping address is other than the one listed on the System Information Document, a Letter of Authorization signed by one of the recorded authorized representatives of the facility and an authorized security code must accompany the order Letter of Authorization must contain the same shipping address that appears on the customer's purchase order Letter of Authorization will not be kept on file at factory Without the proper security code, Letter of Authorization, or if the shipping address is other than what is listed on the System Information Document, the order cannot be processed The System Administrator may elect not to use security codes as part of the authorization process by selecting the Opt Out option. If the Opt Out option IS selected If the shipping address is other then the one listed on the System Information Document, a Letter of Authorization signed by one of the recorded authorized representatives of the facility must accompany the order Letter of Authorization must be signed by one of the facility's authorized representatives Letter of Authorization must contain the same shipping address that appears on the customer's purchase order Letter of Authorization will not be kept on file at factory 21
24 Degree System Information Document System: DG2 / DG3 Note: Degree SID is required with every initial order Facility Name Mailing Address: Shipping Address: City: State: City: State: Zip Code: Zip Code: Phone: ( Fax: ( ) ) By: (Print Name, Primary Systems Administrator) (Title) (Authorized Signatures) I understand that if any of the authorized representatives of this Facility (as listed below) are removed from their duties for any reason whatsoever, it is my responsibility to notify SARGENT Key Records Department, in writing, of their release and the names of their replacements. Date: Authorized Facility Representatives (Print Name) (Title) (Authorized Signatures) Please attach any additional Authorized Facility Representatives. OPT-OUT Option (System Type DG2 & DG3 Only): By selecting this option I elect not to use the sequentially numbered registration certificates and agree to substitute them with a Letter of Authorization. 22 Signature or initials required by System Administrator when selecting to Opt-Out. Note: Use this form along with the keying cover sheets found in the general information section of the price book
26 SARGENT Manufacturing Company 100 Sargent Drive New Haven, CT USA Founded in the early 1800s, SARGENT is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company s customer base includes commercial construction, institutional, and industrial markets. Copyright 2011, 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited :F 3/19/15