Volume Door hardware

Transcription

1 Volume Door hardware

2 Proudly Producing Buy American Product in Leola, PA it's reputation doing what the competition said can't be done. For more than 25 Years PDQ has offered its customers an extensive line of Commercial Grade Mortise locks, Cylindrical locks, Closers and Exit PDQbuilt Devices that exceed industry standards. PDQ offers a cost effective alternative to other higher priced products in the marketplace earning the reputation of having "Premium quality without the Premium Price." PDQ has an extensive line of products which meet the requirements of the Buy America Act including our Grade and Grade 2 locks which are manufactured at our facility in Pennsylvania. PDQ has always been ahead of the curve by shipping our products in 3-5 days. Add to that An Industry Leading warranty and you have the best of both worlds. INDEX PDQ Made in America.2 MR Mortise.3 TJ High End Decorative Apartment.7 XGT Spirit.8 GT Spirit.9 SX.0 GP Spirit. SA Spirit.2 SD.3 Lock Chart Door Control Door Control Door Control Door Control Door Control.9 Spring Cushion Stop Exit Device N Narrow Stile Exit Device Exit Device N Narrow Stile Exit Device Mullion.25 Hinge.26 Electro Mechanical Hardware.27 Door Control Comparison Chart.28 Hinge Details and Cross Reference.29 Door Width Chart.30 Weight Chart.3 2 PREMIUM QUALITY WITHOUT THE PREMIUM PRICE. Superior Warranty Warranty MR Mortise Grade Lifetime XGT Extremely Heavy Duty Cylindrical Grade Lifetime GT Extra Heavy Duty Cylindrical Grade years SX Cylindrical Grade Ball Knob years GP Heavy Duty Cylindrical Grade years SA Heavy Duty Cylindrical Grade years SD Cylindrical Grade years 300 Grade Door Control years 500 Door Controls years 5300 Grade Door Control years 5500 Grade Door Control years 700 Door Controls years 4200 Exit Device years 6200 Exit Device years PDQ offers a family of architectural locks that are domestically assembled; BHMA certified, meeting the requirements of the Buy American Act, and go beyond the limits of ANSI standards. With PDQ you can be assured that all our domestic locks offer the following advantages: Superior Specifications. Superior Strength. Superior Security. SUPERIOR WARRANTIES.

3 ANTIMICROBIAL SUGGESTED ARCHITECTURAL SPECIFICATIONS Lockset will be MR manufactured by PDQ Industries, Inc., Leola, Pennsylvania, assembled in the U.S.A. with US and foreign made material. This product meets the requirements of the Buy American Act and features a lifetime manufacturer s limited warranty. All lock bodies shall conform to Federal Specification FF-H-06 Type 86 and certified to all dimensional specifications of ANSI/BHMA A , 000, Grade. Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E330-02, Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 2453 lbf. (Functions with deadbolts only). Handing shall be field reversible for most common functions. Latchbolt can be fully retracted with 35 lever rotation. Lever shall return to within /2 (except Miami) of door. Levers will have a Philadelphia, Boston, Miami, or Dallas design. Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". All locksets shall meet or exceed all applicable requirements of the Americans with Disabilities Act of 990. MR Mortise Heavy Duty Grade * C O AT I N G PHILADELPHIA (PJEJ) ESCUTCHEON TRIM MR PHILADELPHIA (PFSF) TRIM Certain PDQ products are available with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces. SPECIFICATIONS - MR FOR DOORS: -3/4" to 2" standard (2-/4" special order - not available in all functions or in J trim) BACKSET: 2-3/4" CASE: 3-gauge cold rolled steel mechanism / Dichromated for corrosion resistance FRONT: Beveled /8" on 2" / 626 (US26D) & 630 (US32D) use stainless steel as base material, all other colors use brass as base material STRIKE: Handed Curved Lip Strike / 626 (US26D) & 630 (US32D) use stainless steel as base material, all other colors use brass as base material LATCHBOLT: 3/4" Throw / Investment Cast Stainless Steel / Anti-friction DEADBOLT: " Throw / Investment Cast Stainless Steel HAND: Most functions field reversible. Designate hand for strikes, consult factory for details TRIM: F trim - solid forged brass levers, escutcheons and turns. J trim - solid stainless steel escutcheon, PHL and Memphis levers. Stainless steel Dallas and Chicago levers. W trim - solid stainless steel lever and escutcheon. Stainless steel ball knob KEYS: Two (2) per Cylinder KEYWAYS: SC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: 6 or 7-pin / Compatible with Best, Falcon & Arrow / Large Format IC Core available. Check with factory. CYLINDER: 6 or 7-pin Brass Mortise Cylinder KEYING: Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) FINISHES: or Keyed Alike (KA) / Can be keyed into existing master key systems 605 (US3), 606 (US4), 62 (US0), 63 (US0B), 625 (US26), 626 (US26D) - F trim / Antimicrobial Coating available on 626 (US26D) & 630 (US32D) for F, J, and W trims. CERTIFICATIONS: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4 0 x 8 0 / Certified to ANSI/BHMA , 000, / Operational Grade and Security Grade for F and W trim. Operational Grade, Security Grade 2 for J trim. Windstorm Resistant product Listed. ANSI A , ASTME886-02, ASTME330-02, Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 2453 lbf. (Functions with deadbolts only) / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* COUNTRY OF ORIGIN: Lifetime Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. Note: Heavy Duty Spindle for High Abuse situations is available. Contact Factory for availability and price. 3

4 SECTIONAL J TRIM PJSJ Philadelphia 2 CJSJ Chicago TJSJ Memphis 2 DJSJ Dallas ESCUTCHEON J TRIM PJEJ Philadelphia CJEJ Chicago TJEJ Memphis DJEJ Dallas

5 SECTIONAL F TRIM PFSF Philadelphia MFSF Miami BFSF Boston ESCUTCHEON F TRIM PFEF Philadelphia MFEF Miami BFEF Boston

6 SECTIONAL W TRIM DWSW Dallas BWSW Ball Knob ESCUTCHEON W TRIM DWEW Dallas BWEW Ball Knob

7 SUGGESTED ARCHITECTURAL SPECIFICATIONS Designed to meet the demands of today s most demanding critics, PDQ is pleased to announce the introduction of our all new TJ Apartment Decorative Tubular Latches. Featuring the same popular lever styles as our J Trim mortise locks, this new interior line of locks was designed for the high end apartment, condo and office environment. These tubular levers in both privacy and passage provide a complementary addition to our J Mortise lock line. It offers the architect aesthetically appealing hardware throughout the apartment both entry, passage and privacy. TJ Apartment * Lever Styles TJ APARTMENT SERIES PHILADELPHIA (PHL) LEVER SPECIFICATIONS - TJ Apartment FOR DOORS: For doors -3 8" (35mm) to -3 4" (44mm) thick standard BACKSET: 2-3/4" (70mm) backset standard Optional: 2-3/8" (60mm); STRIKE: Full Lip Strike -5/8" x 2-/4" x 3/32" Standard ROSE: Rose diameter 2 3/8 DOOR PREP: ANSI Standard 60 Door Prep LATCH BOLTS: Latchbolt brass 2" (2.7mm) projection / Latch faceplate is " with -/8" filler provided as standard HAND: Non-Handed FINISHES: 630 (stainless Steel) TRIM: Stainless Steel Levers and roses LEVER STYLES AVAILABLE: Philadelphia, Chicago, Memphis and Dallas. CERTIFICATIONS : Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Five (5) year limited warranty PHILADELPHIA LEVER CHICAGO LEVER MEMPHIS LEVER DALLAS LEVER BOSTON LEVER MIAMI LEVER 7

8 ANTIMICROBIAL XGT Duty Grade Extremely Heavy SUGGESTED ARCHITECTURAL SPECIFICATIONS Lockset will be XGT SPIRIT from PDQ Industries, Inc., Leola, Pennsylvania, assembled in the U.S.A. with US and foreign made material. This product meets the requirements of the Buy American Act and features a lifetime manufacturer s limited warranty, and be certified to ANSI/BHMA A , 4000, Grade. Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 485 lbf. Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". U.L.0C/UBC 7-2 (997) Positive Pressure Rated and U.L.0B Neutral Pressure Rated. Levers to be solid cast, with no plastic inserts, minimum 5-/2" overall length with supportive spring power totally independent of chassis or latch unit. Latchbolt to be minimum 9/6" throw and requires only 4 rotation of levers for full retraction. Lockset fasteners to be concealed with through-the-door throughbolt attachment outside the 2-/8" door prep, exceeds 3000 in lbs. of torque resistance. Additionally, XGT has been tested to more than 4 Million cycles (more than 5 times the BHMA Grade requirement) with virtually no lever sag. * C O AT I N G SPECIFICATIONS - XGT FOR DOORS: -3/4" to 2-/4" thick / Preset for -3/4" door APPLICATION: Through door thru-bolting / Fits standard 6 Door prep BACKSET: 2-3/4" CHASSIS: Heavy duty zinc diecast hubs, investment cast, chromated cold rolled steel, stainless steel and Acuzinc mechanism, billet steel spindles FRONT: 2-/4" x -/8" / Beveled /8" on 2" / Stainless Steel or Wrought Brass STRIKE: ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass TORQUE RESISTANCE: Exceeds 3000 in. lbs. LATCHBOLT: 9/6" Throw, Guarded HAND: Non-handed TRIM: Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws / 4 Lever Rotation High strength stainless steel investment cast spindle Heavy gauge steel mounting plates KEYS: Two (2) per Cylinder KEYWAYS: SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: CYLINDER: KEYING: FINISHES: CERTIFICATIONS: COUNTRY OF ORIGIN: Available for all keyed functions / 6 or 7-pin Compatible with Best, Falcon and Arrow / Large Format IC Core available for PHL Lever Only. Check with factory. 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 606 (US4), 62 (US0), 63 (US0B), 625 (US26), 626 (US26D) *Other finishes available via special order U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0" Certified to ANSI/BHMA A , 4000, Grade / Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E / Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 485 lbf. / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Lifetime Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. XGT SERIES SPIRIT PHILADELPHIA (PHL) LEVER BOSTON (BSN) LEVER Lever Styles PHILADELPHIA (PHL) LEVER MIAMI (MIA) LEVER 3 3 /8" 3 3 /8" 3 3 /8" 3 /4" /2" 3 /6" /2" 3" 5 /2" 5 /2" 5 /8" 8 Certain PDQ products are available with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces.

9 ANTIMICROBIAL SUGGESTED ARCHITECTURAL SPECIFICATIONS Lockset will be GT SPIRIT from PDQ Industries, Inc., Leola, Pennsylvania, assembled in the U.S.A. with US and foreign made material. This product meets the requirements of the Buy American Act and features an twenty-five year manufacturer s limited warranty, and be certified to ANSI/BHMA A , 4000, Grade. Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E Outswing: Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". U.L.0C/UBC 7-2 (997) Positive Pressure Rated and U.L.0B Neutral Pressure Rated. Levers to be solid cast, with no plastic inserts, minimum 5-/2" overall length with supportive spring power totally independent of chassis or latch unit. Latchbolt to be minimum 9/6" throw and requires only 4 rotation of levers for full retraction. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-/8" door prep, exceeds 200 in lbs. of torque resistance. GT Extra Heavy Duty Grade * C O AT I N G BOSTON (BSN) LEVER GT SERIES SPIRIT PHILADELPHIA (PHL) LEVER Lever Styles PHILADELPHIA (PHL) LEVER MIAMI (MIA) LEVER 3 3 /8" 3 3 /8" 3 3 /8" 3 /4" /2" 3 /6" /2" 3" 5 /2" 5 /2" 5 /8" Certain PDQ products are available with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces. SPECIFICATIONS - GT FOR DOORS: -3/4" to 2-/4" thick / Preset for -3/4" door APPLICATION: Through door thru-bolting / Fits standard 6 Door prep BACKSET: 2-3/4" CHASSIS: Heavy duty zinc diecast, investment cast, chromated cold rolled steel, stainless steel and Acuzinc mechanism. Billet Steel spindles for locking functions FRONT: 2-/4" x -/8" / Beveled /8" on 2" / Stainless Steel or Wrought Brass STRIKE: ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass TORQUE RESISTANCE: Exceeds 200 in. lbs. LATCHBOLT: 9/6" Throw Guarded HAND: Non-handed TRIM: Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws / 4 Lever Rotation KEYS: Two (2) per Cylinder KEYWAYS: SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: CYLINDER: KEYING: Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and Arrow / Large Format IC Core available for PHL Lever Only. Check with factory. 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 62 (US0), 63 (US0B), 625 (US26), 626 (US26D) *Other finishes available via special order CERTIFICATIONS: COUNTRY OF ORIGIN: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0" Certified to ANSI/BHMA A , 4000 Grade / Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E / Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 485 lbf. Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Twenty-five (25) year Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. 9

10 SX Heavy Duty Grade SUGGESTED ARCHITECTURAL SPECIFICATIONS SX from PDQ Industries, Inc., Leola, Pennsylvania, lock will conform to ANSI A Grade, surpassing 800,000 cycles, with a five-year manufacturer s limited warranty. UL F Latch UL file no. R3776, 3 hours of fire testing qualified and stainless steel powder metallurgy latch bolt Inside mounting plate shall fit ANSI 6 cut-out. Lockset to be fully adjustable for -3/8" to 2" doors. Lock will accommodate keyways of major manufacturers. SPECIFICATIONS - SX FOR DOORS: -3/8" to 2" thick DOOR PREP: Fits standard 6 door prep BACKSET: 2-3/4", 2-3/8", 5" CASE: Steel, yellow chromate plate FRONT: 2-/4" x -/8" or 2-/4" x " / Stainless steel or wrought bronze STRIKE: 4-7/8" x -/4" (ASA) / T or FL Strike optional / Stainless steel or wrought bronze TRIM: CQ ball knob / Stainless steel or wrought brass KEYWAYS: Also available in keyways of other manufacturers CYLINDER: SFIC core. (Cylinder not included) KEYING: Standard core is available and can be MK, CMK, GMK, or CK. Available Zero Bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing masterkey systems of other manufacturers. FINISHES: US32D(630) CERTIFICATIONS: UL / ULC for ratings of A label (3 hours) and less, UL 0C / UBC 7-2 () positive pressure, for single doors up to 4 0 x 8 0 / Meets ANSI/BHMA A Grade, Surpassed 800,000 Cycles. Five (5) year Limited Warranty SX SERIES SPIRIT CQ Knob 0

11 ANTIMICROBIAL SUGGESTED ARCHITECTURAL SPECIFICATIONS GP SPIRIT from PDQ Industries, Inc., Leola, Pennsylvania, assembled in the U.S.A. with US and foreign made material. This product meets the requirements of the Buy American Act and features a eight-year manufacturer s limited warranty, and be certified to ANSI/BHMA A , 4000, Grade 2. Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 685 lbf. Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". U.L.0C/UBC 7-2 (997) Positive Pressure Rated and U.L.0B Neutral Pressure Rated. Levers to be solid cast, with no plastic inserts, minimum 5-/2" in overall length with supportive spring power totally independent of chassis or latch unit. Lockset to be fully adjustable for -3/8" to -3/4" doors. Positive lever stop is to be totally independent of chassis or latch mechanism. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-/8" door prep, exceeds 600 in lbs. of torque resistance. GP Heavy Duty Grade 2 * C O AT I N G BOSTON (BSN) LEVER GP SERIES SPIRIT PHILADELPHIA (PHL) LEVER Lever Styles PHILADELPHIA (PHL) LEVER MIAMI (MIA) LEVER 3 3 /8" 3 3 /8" 3 3 /8" 3 /4" /2" 3 /6" /2" 3" 5 /2" 5 /2" 5 /8" Certain PDQ products are available with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces. SPECIFICATIONS - GP FOR DOORS: -3/8" to -3/4" thick / Preset for -3/4" door APPLICATION: Through door thru-bolting / Fits standard 60 and 6 Door prep BACKSET: 2-3/4" standard / 2-3/8", 5" optional CHASSIS: Heavy duty zinc diecast, investment cast, cold rolled steel, stainless steel and Acuzinc mechanism FRONT: 2-/4" x -/8" or 2-/4 x / Beveled /8" on 2" / Stainless Steel or Wrought Brass STRIKE: ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass TORQUE RESISTANCE: Exceeds 600 in. lbs. LATCHBOLT: /2" Throw HAND: TRIM: KEYS: KEYWAYS: INTERCHANGEABLE CORE: CYLINDER: KEYING: Non-handed Solid Zinc diecast PHL, BSN or MIA Levers / Wrought Brass Roses Concealed Screws / 65 Lever Rotation Two (2) per Cylinder SCC standard / Also available in keyways of other manufacturers Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon & Arrow / Large Format IC Core available for PHL Lever Only. Check with factory. 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems FINISHES: 605 (US3), 606 (US4), 62 (US0), 63 (US0B), 625 (US26), 626 (US26D) *Other finishes available via special order CERTIFICATIONS: COUNTRY OF ORIGIN: U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x certified to ANSI/BHMA A , 4000, Grade 2 / Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E / Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 685 lbf. / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Eight (8) year Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act.

12 SA Grade 2 SUGGESTED ARCHITECTURAL SPECIFICATIONS Lockset will be SA SPIRIT from PDQ Industries, Inc., Leola, Pennsylvania, assembled in U.S.A. This product meets the requirements of the Buy American Act and features a five-year manufacturer s limited warranty. Lockset will be certified to ANSI/BHMA A , 4000, Grade 2. Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". U.L. 0C/UBC 7-2 (997) Positive Pressure Rated and U.L. 0B Neutral Pressure Rated. Levers to be 5-/8" in overall length with supportive spring power totally independent of chassis or latch unit. Lockset to be fully adjustable for -3/8" to -3/4" doors. Positive lever stop is to be totally independent of chassis or latch mechanism. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-/8" door prep. * SPECIFICATIONS - SA FOR DOORS: -3/8" to -3/4" thick / Preset for -3/4" door APPLICATION: Through door thru-bolting / Fits standard 60 and 6 Door prep BACKSET: 2-3/4" standard / 2-3/8", 5" optional CHASSIS: Heavy-gauge cold rolled steel mechanism / Dichromated for corrosion resistance FRONT: 2-/4" x -/8" or 2-/4" x " / Beveled /8" on 2" / Stainless Steel or Wrought Brass STRIKE: ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass LATCHBOLT: /2" Throw HAND: Non-handed TRIM: Solid Zinc diecast PHL Levers with plastic insert / Wrought Brass Roses / Concealed Screws KEYS: Two (2) per Cylinder KEYWAYS: SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: Available for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon & Arrow CYLINDER: KEYING: FINISHES: CERTIFICATIONS: COUNTRY OF ORIGIN: 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 63 (US0B), 626 (US26D) U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0" / Certified to ANSI/BHMA A , 4000, Grade 2. / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Five (5) year Limited Warranty Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. SA SERIES SPIRIT PHILADELPHIA (PHL) LEVER Lever Styles PHILADELPHIA (PHL) LEVER 3 3 /8" 3 /6" /2" 5 /2" 2

13 SUGGESTED ARCHITECTURAL SPECIFICATIONS Lockset will be SD series from PDQ Industries, Inc., Leola, Pennsylvania. Lock will feature a five-year manufacturer s limited warranty and be U.L./U.L.C. listed and certified to ANSI/BHMA A , 4000, Grade 2. Listed by UL / ULC for ratings of A label (3 hours) and less, UL0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0". Lock shall fit type 60 or 6 door preparation. Lockset to be fully adjustable for -3/8" to -3/4" door thickness. Lock will accommodate keyways of major manufacturers. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-/8" door preparation. Through-bolts to be removable, if desired, to use only the 2-/8" door preparation. SD Grade 2 * SD SERIES WITH THROUGH-BOLTS PHILADELPHIA (PHL) LEVER BOSTON (BSN) LEVER PHILADELPHIA (PHL) LEVER MIAMI (MIA) LEVER MEMPHIS (MEM) LEVER Lever Styles 3 3 /8" 3 3 /8" 3 3 /8" 3 3 /8" 2 3 /4" /2" 2 /2 /4" 2 7 /8 2 / /64" 5 /6" 6 /4" 6 3 /8" 6 /4" 6 4 /64" SPECIFICATIONS - SD FOR DOORS: -3/8" to -3/4" thick / Preset for -3/4" door APPLICATION: Through door thru-bolting / Fits standard 60 and 6 Door prep / Thru-Bolts are removable BACKSET: 2-3/4" standard / 2-3/8" optional CHASSIS: Heavy-gauge cold rolled steel mechanism / Dichromated for corrosion resistance FRONT: 2-/4" x -/8" or 2-/4" x " / Beveled /8" on 2" / Stainless Steel or Wrought Brass STRIKE: ASA standard / T-Strike or Full Lip Strike optional / Stainless Steel or Wrought Brass LATCHBOLT: /2" Throw HAND: Non-handed TRIM: Solid Zinc diecast PHL Levers / Wrought Brass Roses / Concealed Screws KEYS: Two (2) per Cylinder KEYWAYS: SCC standard / Also available in keyways of other manufacturers INTERCHANGEABLE CORE: Available 6 function only / 6 or 7-pin / Compatible with Best, Falcon & Arrow CYLINDER: KEYING: FINISHES: CERTIFICATIONS: COUNTRY OF ORIGIN: 6-pin Brass Insert Cylinder keyed to 5-pins Options: MK, CMK or GMK / Zero Bitted (KO), Keyed Different (KD) or Keyed Alike (KA) Can be keyed into existing master key systems 605 (US3), 63 (US0B), 626 (US26D) U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8') / UL 0C / UBC 7-2 (997) positive pressure, for single doors up to 4'0" x 8'0" Certified to ANSI/BHMA A , 4000, Grade 2 / Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* Five (5) year Limited Warranty Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, qualifying as meeting the Buy American Act. 3

14 ANTIMICROBIAL ANTIMICROBIAL ANTIMICROBIAL ANTIMICROBIAL LOCK SERIES CHART Certification Limited Warranty UL ADA Trim Cylinders Finishes MR U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA , 000, Operational Grade Security with Escutcheon trim, Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E330-02, Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 2453 lbf. (Functions with deadbolts only), PHL/BSN Levers meet all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* C O AT I N G * Lifetime X X** PFSF BFSF MFSF DWSW Major keyways IC Cores 605, , , *** XGT U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA A , 4000, Grade Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 485 lbf. Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* C O AT I N G * Lifetime X X** PHL BSN MIA Major keyways IC Cores 605, , , 626 GT U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA A , 4000, Grade, Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E , Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 485 lbf. Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* C O AT I N G * 25-Years X X** PHL BSN MIA Major keyways IC Cores 605, , , 626 SX U.L./U.L.C. Listed for A label (3 hour) single swing doors (4'0" x 8'0"). U.L. 0C/UBC 7-2 (997) Positive Pressure Rated. U.L. 0B Neutral Pressure Rated. 5-Years X CQ KNOB Works with SFIC Core Standard 630 GP U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA A , 4000, Grade 2 Windstorm Resistant Product Listed - ANSI A , ASTM E886-02, ASTM E Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 685 lbf. Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* C O AT I N G * 8-Years X X** PHL BSN MIA Major keyways IC Cores 605, , , 626 SA U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA A , 4000, Grade 2, Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA)* * 5-Years X X** PHL Major keyways SFIC Core Available SD U.L., U.L.C. listed for A label (3 hour) single swing doors (4' x 8'), Certified to ANSI/BHMA A , 4000, Grade 2, Meets all applicable accessibility requirements of the Americans with Disabilities Act (ADA), Manufactured in the Republic of South Korea, a country that has signed a Trade Agreements Act with the U.S.A. and is identified as a Designated Country; thus, waiving the Buy American Act.* * 5-Years X X** PHL BSN MIA Major keyways SFIC Core Available *Assembled in the U.S.A. with U.S. and foreign material. Meets the requirements of the Buy American Act. **Except Miami Levers ***Dallas Only Certain PDQ products are available with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces.

15 SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be PDQ Industries, Inc. 700 with full rack and pinion construction, heavy duty cast iron closer body, forged steel main arm and full architectural cover. Hydraulic control shall be through separate hex key non-critical sweep, latch and backcheck valve adjustment. Backcheck positioning valve to provide consistent backcheck range on parallel arm applications. Optional delayed action (in lieu of backcheck) to be effective from maximum opening to approximately 70 degrees. Closers shall be non-handed, suitable for regular, top jamb and parallel arm applications with fasteners for wood and metal doors and frames. Sex nuts and bolts shall be furnished standard. Spring adjustment to be provided throughout a range of sizes -6 and capable of meeting barrier free force restrictions. All products to carry a 25-year manufacturer s limited warranty. Closers shall be listed by U.L./U.L.C., comply with UL 0C and UBC 7-2 (997) for positive pressure and certified to ANSI A56.4 Grade. 700 Door Control HOLD OPEN ARM (HO) Closer Arms 700 SERIES Door Control DOOR SAVER ARM (DS) SPECIFICATIONS HANDING: Non-handed OPERATION: Rack and pinion design BODY: High strength cast iron ARM: Forged steel main arm / Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy parallel duty stop arm ADJUSTMENT: Adjustable controlled closing / Separate hydraulic backcheck standard / Backcheck positioning valve standard / Separate sweep, latch, backcheck intensity and backcheck positioning valves / Optional delayed action (in lieu of backcheck) SIZE: Adjustable size -6 MOUNTING: Tri-packed for regular, top jamb and parallel arm installations / Fasteners for wood and metal doors and frames / Sex nuts and bolts standard / Retrofits LCN 4040 COVER: Full plastic cover standard FINISHES: Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome architectural finishes CERTIFICATION: UL and ULC listed / Complies with UL 0C and UBC 7.2 (997) / Certified to ANSI A56.4 Grade / Meets requirements of ANSI A7. and ADA. Twenty-five (25) year limited warranty COUNTRY OF ORIGIN: This product meets the requirements of the "Buy American Act" HOLD OPEN DOOR SAVER ARM (DSHO) SPRING CUSHION STOP 5

16 5500 Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection PDQ Industries, Inc with full rack and pinion construction, heavy duty cast aluminum closer body, stamped flat style arm assembly and full cover. Hydraulic control shall be through separate hex-key non-critical sweep, latch and backcheck adjustment. Optional delayed action to be effective from maximum opening to approximately 70 degrees. Closers shall be non-handed, suitable for regular, top jamb and parallel arm applications with fasteners for wood or metal doors and frames. Sex nuts and bolts shall be furnished standard. Spring adjustment to be provided throughout a range of sizes -6 and capable of meeting barrier free opening force requirements. All products carry a 25-year manufacturer s limited warranty. Closers shall be listed by U.L./U.L.C., comply with UL 0C and UBC 7-2 (997) for positive pressure and certified to ANSI A56.4 Grade. * SPECIFICATIONS HANDING: Non-handed OPERATION: Rack and pinion design BODY: High strength aluminum alloy ARM: Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm ADJUSTMENT: Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action SIZE: Adjustable size -6 / Can meet 5 lbf. and 8.5 lbf. barrier free requirements MOUNTING: Common 2" x 3/4" mounting hole pattern retrofits Norton 8500, Yale 3500 and DORMA 8600FC / Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for wood and metal doors and frames / Sex nuts and bolts standard COVER: Full plastic cover standard (non-handed) FINISHES: Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome finishes CERTIFICATION: U.L. and U.L.C. listed / Complies with UL 0C and UBC 7.2 (997) / Certified to ANSI A56.4 Grade / Meets the requirements of ANSI A7. and ADA*. Twenty-five (25) year limited warranty COUNTRY OF ORIGIN: This product meets the requirements of the "Buy American Act" 5500 SERIES Door Control HOLD OPEN ARM (HO) Closer Arms TRACK ARM (TA) 6 SPRING CUSHION STOP DOOR SAVER ARM (DS) HOLD OPEN DOOR SAVER ARM (DSHO)

17 SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be narrow projection PDQ Industries, Inc with full rack and pinion construction, heavy duty cast aluminum closer body, stamped flat style arm assembly and streamline cover. Hydraulic control shall be through separate hex-key non-critical sweep, latch and backcheck adjustment. Optional delayed action to be effective from maximum opening to approximately 70 degrees. Closers shall be non-handed, suitable for regular, top jamb and parallel arm applications with fasteners for wood or metal doors and frames. Sex nuts and bolts shall be furnished standard. Spring adjustment to be provided throughout a range of sizes -6 and capable of meeting barrier free opening force requirements. All products carry a 25-year manufacturer s limited warranty. Closers shall be listed by U.L./U.L.C., comply with UL 0C and UBC 7-2 (997) for positive pressure and is certified to ANSI A56.4 Grade Door Control * HOLD OPEN ARM (HO) Closer Arms 5300 SERIES Door Control TRACK ARM (TA) SPECIFICATIONS HANDING: Non-handed OPERATION: Rack and pinion design BODY: High strength aluminum alloy ARM: Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm ADJUSTMENT: Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action SIZE: Adjustable size -6 / Can meet 5 lbf. and 8.5 lbf. barrier free requirements MOUNTING: Common 2" x 3/4" mounting hole pattern retrofits Norton 8300, Yale 3300 and DORMA 8600 / Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for wood and metal doors and frames / Sex nuts and bolts standard COVER: Streamline plastic cover standard (non-handed) FINISHES: Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and polished chrome finishes CERTIFICATION: U.L. and U.L.C. listed / Complies with UL 0C and UBC 7.2 (997) / Certified to ANSI A56.4 Grade / Meets the requirements of ANSI A7. and ADA*. Twenty-five (25) year limited warranty COUNTRY OF ORIGIN: This product meets the requirements of the "Buy American Act" DOOR SAVER ARM (DS) HOLD OPEN DOOR SAVER ARM (DSHO) SPRING CUSHION STOP 7

18 500 Door Control SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be PDQ Industries, Inc. 500 with full rack and pinion construction, heavy duty cast aluminum closer body, stamped flat style arm assembly and full architectural cover. Hydraulic control shall be through separate hex-key non-critical sweep, latch and backcheck adjustment. Optional delayed action to be effective from maximum opening to approximately 70 degrees. Closers shall be non-handed, suitable for regular, top jamb and parallel arm applications with fasteners for wood or metal doors and frames. Sex nuts and bolts shall be furnished standard. Spring adjustment to be provided throughout a range of sizes -6 and capable of meeting barrier free opening force requirements. All products carry a 25-year manufacturer s limited warranty. Closers shall be listed by U.L./U.L.C., comply with UL 0C and UBC 7-2 (997) for positive pressure and certified to ANSI A56.4 Grade. SPECIFICATIONS HANDING: Non-handed OPERATION: Rack and pinion design BODY: High strength aluminum alloy ARM: Flat style arm assembly / Optional hold open arm / Optional DS/DSHO heavy duty parallel stop arm ADJUSTMENT: Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves / Optional adjustable delayed action SIZE: Adjustable size -6 MOUNTING: Tri-packed for regular, top jamb and parallel arm installations / Fasteners furnished for wood and metal doors and frames / Sex nuts and bolts standard COVER: Full plastic cover standard (non-handed) FINISHES: Sprayed aluminum, dark duranodic bronze and gold / Optional polished brass and satin chrome finishes CERTIFICATION: U.L. and U.L.C. listed / Complies with UL 0C and UBC 7.2 (997) / Certified to ANSI A56.4 Grade / Meets the requirements of ANSI A7. and ADA. Twenty-five (25) year limited warranty COUNTRY OF ORIGIN: This product meets the requirements of the "Buy American Act" 500 SERIES Door Control HOLD OPEN ARM (HO) Closer Arms TRACK ARM (TA) 8 SPRING CUSHION STOP DOOR SAVER ARM (DS) HOLD OPEN DOOR SAVER ARM (DSHO)

19 SUGGESTED ARCHITECTURAL SPECIFICATIONS All door closers shall be PDQ Industries, Inc. 300 with full rack and pinion construction, cast aluminum closer body, round style arm assembly and optional streamline cover. Hydraulic control shall be through separate non-critical sweep, latch and backcheck valve adjustment. Closers shall be non-handed, suitable for regular, top jamb and parallel arm applications with fasteners for wood and metal doors and frames. Sex nuts and bolts shall be furnished standard. Closers shall be available in adjustable version size -4 or 3-6. Closers shall be listed by U.L./U.L.C., comply with UL 0C and UBC 7-2 (997) for positive pressure and is certified to ANSI A56.4 Grade. 300 Door Control * HOLD OPEN ARM (HO) Closer Arms 300 SERIES Door Control TRACK ARM (TA) SPECIFICATIONS HANDING: Non-handed OPERATION: Rack and pinion design BODY: High strength aluminum alloy ADJUSTMENT: Adjustable controlled closing / Separate hydraulic backcheck standard / Separate sweep, latch and backcheck intensity valves SIZE: Adjustable spring size through 4 or 3 through 6 / Available to meet barrier free opening force requirements MOUNTING: Common 9-/6" x 3/4" mounting hole pattern / Tri-packed for regular, top jamb and parallel arm installations / Optional hold open arm / Optional DS heavy duty parallel stop arm / Sex nuts and bolts standard COVER: Streamline plastic cover optional FINISHES: Sprayed aluminum, dark duranodic bronze and gold CERTIFICATION: UL and ULC listed / Certified to ANSI A56.4 Grade / Complies with UL 0C and UBC 7.2 (997) Twenty-Five (25) year limited warranty COUNTRY OF ORIGIN: This product meets the requirements of the "Buy American Act" DOOR SAVER ARM (DS) HOLD OPEN DOOR SAVER ARM (DSHO) SPRING CUSHION STOP 9

20 SPRING CUSHION STOP SUGGESTED ARCHITECTURAL SPECIFICATIONS This unit is an add on kit that can be included as an option on new DS/DSHO arms. It also can be installed on existing DS/DSHO arm applications using the existing threaded hole for the bumper stop and one of the mounting screw holes. The spring cushion kit is available in 2 spring sizes, so it can be tailored to provide more effective cushioning for specific door widths. Designed to be self aligning, this unit works with any door that incorporates a PDQ DS/DSHO arm with a cushioned bumper (won't fit with old style metal bumper). PDQ's Spring Cushion is manufactured with investment cast stainless steel for corrosion resistance and durability. The spring cushion option has been extensively tested in high abuse situations, and far exceeds the most demanding field conditions. The /02 does not alter or decrease the strength of the DS/DSHO arm. Hand is determined in the field and reversible for LH and RH Doors. SPECIFICATIONS - Spring Cushion Stop HANDING: Field Reversible DOOR SIZES:: SCS- recommended for 3'0" X 8' X 0" SCS-2 recommended for 4'0" X 8'0" One () year limited warranty SPRING CUSHION STOP 20

21 ANTIMICROBIAL SUGGESTED ARCHITECTURAL SPECIFICATIONS All exit devices shall be PDQ Industries, Inc rim or surface vertical rod devices. Surface vertical rod devices to have top and bottom pullman latch bolts. Latch bolts to be dead locking where applicable. All rails shall be constructed of extruded aluminum with stainless steel touch pads. Devices to be furnished with metal chassis covers and end caps. Devices to be available for non-labeled doors and fire labeled doors. Devices for non-labeled doors shall have hex key dogging standard and cylinder dogging optional. All devices to offer a variety of trim options including heavy duty escutcheon, heavy duty rose trim and electrified operation. Rose trim to be available with Philadelphia, Boston or Miami levers. All devices to be furnished standard with sex nuts. Devices shall be listed by ANSI/BHMA Certified Grade, U.L./U.L.C. and comply with U.L. 0C and UBC 7-2 (997) for positive pressure. All products to carry a 0-year limited warranty. One-year limited warranty for electrified components (629 power supply must be used for warranty to apply) Exit Device C O AT I N G 629 Exit Trim 6200 SERIES Exit Device SPECIFICATIONS CHASSIS: Cadmium plated steel RAIL: Extruded aluminum TOUCH PAD: Stainless steel LATCH BOLT: Stainless steel dead locking / 3/4" throw Rim / 5/8" throw SVR STRIKE: Supplied standard for 6 prep with 5/8" stop and standard door gap of /8" only PROJECTION: 3-/8 projection / 2-5/8 projection when dogged HAND: Device and trim are non-handed DOGGING: Hex key dogging standard / Cylinder dogging optional / No dogging on fire labeled devices APPLICATION: Rim or surface vertical rod (8 0 tall door standard) STILE WIDTH: 4-/4" minimum DOOR THICKNESS: -3/4" DOOR WIDTH: Supplied standard for 3 ft doors. Consult Door Width Chart (page 30) to determine correct device for your application DEVICE FINISHES: Polished brass, satin brass, oil rubbed bronze, satin chrome and satin stainless steel / Optional Antimicrobial Coating FASTENERS: Sex nuts and bolts standard CERTIFICATION: UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x 8 0 maximum single, 8 0 x 8 0 maximum pairs / Complies with UL 0C and UBC 7.2 (997) / Certified to ANSI/BHMA A Grade / Complies with U.L. 0C and UBC 7.2 (997) Ten (0) year limited warranty Certain PDQ products are available SECTIONAL TRIM 629 LPKH ESCUTCHEON TRIM 629 LPEKFH with DuPont TM Alesta AM patented* powder coating, treated with silver ionic technology that is known to inhibit the growth of microbes on powder coated surfaces. 2

22 6202N Narrow Stile Exit Device SUGGESTED ARCHITECTURAL SPECIFICATIONS The PDQ 6202 Narrow stile Panic and Fire Rated Exit Hardware is designed for use on contemporary glass doors in public buildings, resort hotels, stores, and all types of applications where narrow stile aluminum framing is used. Available in 63 and 630. It is an attractive approach to door control when narrow stile doors require an exit device. The narrow chassis design permits use on narrow stile aluminum doors where a standard device may not fit. SPECIFICATIONS N CHASSIS: Cadmium plated steel RAIL: Extruded aluminum TOUCH PAD: Stainless steel LATCH BOLT: Stainless steel dead locking / 3/4" throw Rim STRIKE: Standard strike / Standard strike for Fire Rated Device PROJECTION: 3-/8" projection / 2-5/8" projection when dogged HAND: Device and trim are non-handed DOGGING: Hex Key Dogging Standard / No dogging available on Fire Rated Devices APPLICATION: Rim and Rim Fire Rated STILE WIDTH: Minimum 2 9/32" DOOR THICKNESS: -3/4 DOOR WIDTH: Supplied standard for 3 ft doors. Consult Door Width Chart (page 30) to determine correct device for your application DEVICE FINISHES: Satin Stainless steel and oil rubbed bronze FASTENERS: Machine Screws furnished standard / Optional SNB ordered separately / Fire labeled Device comes standard with SNB CERTIFICATION: UL/ULC listed for Panic, Fire Exit Hardware labeled for up to 3 hours for 4 0 x maximum single, 8 0 x 8 0 maximum pairs / Complies with UL 0C and UBC 7.2 (997) Ten (0) year limited warranty 6202N SERIES EXIT DEVICE 629N Exit Trim 629NGPH 629NGPG 22

23 SUGGESTED ARCHITECTURAL SPECIFICATIONS All exit devices shall be PDQ Industries, Inc rim or surface vertical rod devices. Surface vertical rod devices to have top and bottom pullman latch bolts. Latch bolts to be dead locking where applicable. All touch bar components to be constructed of heavy gauge wrought steel or stainless steel. Devices to be furnished with metal chassis covers and end caps. Devices to be available for non-labeled doors and fire labeled doors. Devices for non-labeled doors shall have hex key dogging standard. All devices to offer a variety of trim options including pulls, standard rose trim, heavy duty rose trim, escutcheon and thumb piece trim. Fasteners to be furnished for wood and metal applications. Fire labeled devices furnished standard with sex nuts. Devices shall be listed by U.L./U.L.C. and comply with U.L. 0C and UBC 7-2 (997) for positive pressure. All products to carry a 5-year limited warranty Exit Device SECTIONAL TRIM 429 LPN 429 Exit Trim 4200 SERIES Exit Device ESCUTCHEON TRIM 429 LPEKFH SPECIFICATIONS CHASSIS: Cadmium plated steel RAIL: Heavy gauge steel or stainless steel TOUCH PAD: Heavy gauge steel or stainless steel LATCH BOLT: Stainless steel dead locking / 3/4" throw Rim / 5/8" throw SVR STRIKE: Standard strike works with 6 prep with 5/8" stop and standard door gap of /8" PROJECTION: 2-5/8" projection HAND: Device is non-handed DOGGING: Hex key dogging standard / No dogging on fire labeled devices APPLICATION: Rim or surface vertical rod (7'0" tall door standard) BACKSET: Covers 6 Prep STILE WIDTH: 4-/4" minimum DOOR THICKNESS: -3/4" DOOR WIDTH: Supplied standard for 3 ft doors. Consult Door Width Chart (page 30) to determine correct device for your application DEVICE FINISHES: Aluminum, duro, gold, satin chrome, polished brass and satin stainless steel FASTENERS: Fasteners furnished for wood and metal door applications / Sex nuts and bolts standard with fire labeled devices CERTIFICATION: U.L./U.L.C. listed for Panic, Fire Exit Hardware labeled for up to -/2 hour for 3'0" x 7'0" maximum single, 6'0" x 7'0" maximum pairs / Complies with U.L. 0C and UBC 7.2 (997) Five (5) year limited warranty 23

24 4202N Narrow Stile Exit Device SUGGESTED ARCHITECTURAL SPECIFICATIONS The PDQ 4200 Narrow Stile device has the same features as our very popular 4200 Standard unit, but features a design that will fit on a 2.5" minimum stile width. Designed for use on single or double doors with mullion. Units are non-handed to facilitate easy field installation. The 4200 Narrow Stile is available in 689 Aluminum and 695 Dark Bronze Painted Finishes. SPECIFICATIONS N CHASSIS: Cadmium plated steel RAIL: Steel TOUCH PAD: Steel LATCH BOLT: 5/8" deadlatching trigger Stainless Steel / /6" latchbolt Stainless Steel STRIKE: Stainless steel with a plated roller PROJECTION: 2 7/6" projection, /6" projection when depressed or dogged / Includes shim for doors prepped w//2" stop / Shim not required on 5/8" stop HAND: Device and trim are non-handed DOGGING: Hex key dogging standard APPLICATION: Rim only STILE WIDTH: 2.5" Minimum stile width DOOR THICKNESS: -3/4 DOOR WIDTH: Supplied standard for 3 ft doors. Consult Door Width Chart (page 30) to determine correct device for your application DEVICE FINISHES: 689 and 695 painted finishes. FASTENERS: Supplied with Machine Screws / Sex Nut and Bolts required for wood doors SNB's must be ordered separately CERTIFICATION: UL/ULC listed for Panic Five (5) year limited warranty 4202N SERIES Exit Device 429N Exit Trim 429NGPH 429NGPG 24

25 SUGGESTED ARCHITECTURAL SPECIFICATIONS The PDQ 9000 series keyed removeable mullions are for use with our 4200 and 6200 series Rim Exit Devices on non fire or fire rated pairs of doors. They are designed for quick removal from the top bracket by a simple operation of the rim cylinder when a clear, unobstructed large opening is required. Once the mullion is removed, carts, gurneys, large machinery and the like can freely pass through the opening. When the mullion is re-installed, the unit will self lock in place without the need for the key. Each keyed removable mullion set includes top and bottom bracket set, mullion tube, and shims. Rim Cylinder is sold separately Mullions 9200 SERIES Mullion SPECIFICATIONS TUBE DIMENSIONS: 2 W x 3 D / /8 wall thickness / Guage steel tube SIZE: 8 and 0 sizes available in Fire and Non-Fire Rated styles COLOR: Gray Baked Powder Coating CERTIFICATION: UL Rated by UL 0B / UL0S standard One () year limited warranty 25