high abuse led bollard

Transcription

1 high abuse led bollard

2 Tough enough for high abuse environments. Smart enough to deliver high performance LED efficiency. The TLED-B-HA Series LED bollard is truly a durable, energy-efficient work horse with a unique architectural aesthetic. Its heavy-duty design not only handles daily abuse from things like runaway shopping carts, but it s paramount for high trafficked and high vandalism areas like commercial parking lots, schools, retail areas, sports complexes, parks and other high use facilities.

3 Performance designed with durability and efficiency Designed with a 1/8 wall thickness, the full length square steel center support beam is the heart of this bollard s strength. This center support offers four 12-gauge steel fins combined with TRACE*LITE s exclusive patent pending PowerDirect compression plate providing the muscle that allows the TLED-B-HA Series to withstand immense abuse. Strength simulation tests done demonstrate that an impact from a 3,500 lb automobile traveling at 5 mph caused less than a 3/16 deflection. All the TLED-B-HA Series components have also been designed to carry the entire heat sink load so there is no need for an additional heat sink component as in traditional bollard designs. Style designed with versatility and convenience The TLED-B-HA Series has been uniquely constructed with a replaceable protective skin. The use of TRACE*LITE s PowerDirect compression plate allows the outer skin to be easily slipped off without challenging the integrity of the bollard. Bollards that may become dented from abuse can be conveniently updated with no need to replace the entire fixture. The top interfacing ring not only offers a pleasing architectural aesthetic, but it provides additional protection to the lamp head. The dome head is also fully enclosed to prevent debris build-up making the TLED-B-HA LED bollard even more tamper-resistant and an attractive high abuse solution. Affordability... designed to reduce energy and increase savings Every aspect of the TLED-B-HA Series is designed to produce superior illumination and energy savings. While consuming only 27.5 total system watts, this bollard offers light performance very similar to competing bollards in the 40W range making it a great performer at a lower operating cost. The TLED-B-HA Series LED bollard qualifies as a green product and offers a pleasing 4700K color temperature. The thermal management chimney design maximizes performance and delivers a 70,000 hour life with 70% lumen maintenance, which also contributes to its high efficiency output

4 Robust Design for High Abuse Environments. Bollard Dome Head & Reflectors Delivers exceptional light quality and efficiency with an optical design that provides even, consistent light distribution. Polycarbonate shield protects against vandalism or debris build-up. LED Light Engine with Built-in Heat Sink Heat sinking technology moves heat away from the LEDs, maximizing system performance and delivering a 70,000 hour life with 70% lumen maintenance. Solid Steel Compression Plate Secures the support beam and bollard body to the base plate. LED Driver Class 2 power supply with input voltage range of 120 to 277VAC, providing a Class A EMI rating and a high power factor of Extruded Aluminum Body High strength, corrosion resistant extruded aluminum body incorporates a UV resistant, durable, polyester based powder coated finish. Tamper Resistant Hardware Prevents unauthorized access to internal components. Steel Inner Support Beam Full length, 4 square, internal galvanized steel support beam is the backbone of the bollard, providing exceptional rigidity and strength. Aluminum Mounting Base & Anchors New construction J-bolts and retro-fit wedge anchors are both included and firmly secure the aluminum anchor base to the concrete.

5 Impact Testing Strength simulations tests done on the TLED-B-HA demonstrate that an impact from a 3,500 lb automobile traveling at 5 mph and striking the bollard body 20 from finished grade caused less than a 3/16 deflection. Plot Type: Static Displacement 1 Deformation Scale: 1: lb 5 MPH Total Force: 14,000 lbs DISPLACEMENT: URES (in) Direction of Impact e

6 Specifications Construction: A high strength 8 extruded aluminum body housing features the TLED-B-HA s most important construction feature, a full length, internal steel support beam that is secured to the base plate by the same 12 J-bolts (included) that anchor the base plate to the concrete pad. The 4 square support beam provides ample space for mounting the LED driver as well as for the TLED-B-HA s patentpending thermal management system to dissipate heat away from the LED module and driver which allows for optimum performance and durability of the LED light engine without sacrificing design aesthetics. The TLED-B-HA is ETL listed for wet locations, and all exposed hardware has robust tamper-resistant head designs. Finish: TLED-B-HA also incorporates a UV resistant, long lasting, polyester based powder coated finish. Standard colors: Black, white or bronze. Optics: Our TLED-B-HA series high abuse LED bollard delivers exceptional light quality, efficiency and light distribution with an optical design that provides even, consistent light distribution. The TLED-B-HA s textured silver, internal reflector is specifically designed to diffuse and distribute light where it is needed in the most efficient way possible. Electrical: The 12 LED SSL light engine in the TLED-B-HA draws 27.5 watts total, including the driver. The TLED-B-HA is powered by constant voltage control driver and provides a 70,000 hour rated life with 70% lumen maintenance, a 4700K CCT, and a CRI of 75. All drivers are Class 2 power supplies with input voltage range of 120VAC to 277VAC, providing a Class A EMI rating and a high power factor of The TLED-B-HA is suitable for operation in -40 C (-40 F) to 40 C (104 F) ambient conditions. Thermal Management: LEDLITElogic heat sinking technology moves heat away from the LEDs by utilizing a patent-pending chimney design that takes advantage of thermal convection dynamics maximizing system performance and delivering a 70,000 hour life with 70% lumen maintenance. Environmentally Friendly Design: TLED-B-HA luminaires consume very little energy and provide long life in comparison to traditional lamp technologies. Our manufacturing process utilizes no hazardous substances such as mercury or lead. The TLED-B-HA is RoHS (Restriction of Hazardous Substances) compliant, 100% recyclable, and provides a significant reduction in Kw load and carbon emissions. Warranty: Any component that fails due to manufacturer s defect is guaranteed for 5 years. The warranty does not cover physical damage, abuse or acts of God. Manufacturer reserves the right to charge for such repairs if deemed necessary. Installation: The TLED-B-HA series features a sturdy, full length, 4 square steel support beam that is anchored to the rugged cast AL base plate with the same three (3) 3/8 x 12 J-bolts that anchor the base plate to the concrete pad. The TLED-B-HA bollard body easily installs over the support beam and is secured on the bottom end to the base plate by three tamper-resistant fasteners. At the top, an interior compression plate is installed to finish securing the support beam and bollard body to the base plate. The LED Light engine housed in the bollard head is wired to the driver using a quick connect attached to the bollard body using three additional tamper-resistant fasteners. Transient Protection System (Option: TP): The LEDLITElogic optional transient protection device is designed to be used in conjunction with our LED drivers. The -TP option utilizes a 3-leaded device that protects Line-Ground, Line-Neutral, and Neutral-Ground in accordance with IEEE/ANSI C guidelines. The surge current rating of the -TP option is 10,000 amps. Testing & Compliance: The reliability and performance of the TLED-B-HA is evaluated in accordance with the parameters outlined and reported by LM-79 and LM-80 documents. Photometric data is tested to IESNA LM standard by an independent testing laboratory. Lumen maintenance, L70 a measure of long term reliability, is determined for the light source, which consists of the LED and PCB subassembly as installed in the luminaire, is determined using LM-80 in situ thermal and reliability data as provided by the LED manufacturer in accordance with DOE/EPA standards. Listing: The TLED-B-HA is ETL certified under UL1598 specifications and listed for wet locations. PATENT PENDING SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

7 Fixture Performance Part Number Initial Lumens Lumens per Watt (LPW) Total Watts L70 25 C BUG Ratings TLED-B-12-HA ,000 B0-U2-G1 NOTE: Lumen maintenance and life (part of LM-80 data) are per published information from primary LED suppliers and is based on design operation at their specified thermal management and electrical design parameters. Dimensions sample Photometrics TLED-B-HA-12 (Type V Short Non-Cutoff).1fc.5fc 1fc 5fc Ordering Information Example: TLED-B-12-DT-SLV-HA-EM Series # of LEDs Input Voltage Finish Options (Factory Installed) TLED-B 12 = 12 LEDs DT = 120/277VAC BL = Black HA = High Abuse = 347VAC WHT = White EM 2 = Emergency Back-Up Lighting = 480VAC BR = Bronze CC 3 = Custom Color 1 Includes step-down transformer 2 Consult factory for details 3 Consult factory for specific part number and details

8