MULTI POINT LOCK TRIM 2012 Price Book

Transcription

1 Trim for Swinging Patio Doors MULTI POINT LOCK TRIM 2012 Price Book ASSA ABLOY, the global leader in door opening solutions

2 HAND OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call Customer Service at (800) In-Swing Doors Out-Swing Doors Outside Outside Outside Outside Hinge is on the left. Door is Left Hand (LH). Hinge is on the right. Door is Right Hand (RH). Hinge is on the left. Door is Left Hand (LH). Hinge is on the right. Door is Right Hand (RH). FINISHES US7 - French Antique US10B - Oil Rubbed Bronze US15 - Satin Nickel US15A - Pewter US26 - Polished Chrome PVD-Lifetime DB - Deep Burgundy FB - Flat Black MB - Medium Bronze SP - Silver Patina SS - Stainless Steel Three Point Lock Trim Door Configuration (Profile Cylinder Below Handle 35 8 Center to Center) PRODUCT CODE FORMAT D LH MB Plate Style (11 2 x 11 ) (Medium Bronze) Handing (Left Hand) Handle (Durango) Function (Non-Keyed, Thumbturn Inside) TERMS AND CONDITIONS OF SALE Terms: Net 30 Days on established credit. Shipping: EMTEK builds all products to order and ships most orders within 48 hours. EMTEK pays the freight on all orders using 3 Day shipping service. To shorten the transit time, shipments can be upgraded to 2nd Day service or Next Day service for a fee. All shipping services are from the time the order is shipped. Returned Goods: Merchandise may be returned only with approval from the factory. A copy of the factory issued RGA must accompany all returns. All returns must be sent freight prepaid. Returned goods are subject to a minimum 25% handling charge. Factory issued RGA s expire 90 days from the date they are issued. Minimum Order: There is no minimum order quantity. A $10.00 net handling charge will be added to orders valued at less than $50.00 net. Patina es: Sandcast & Lost Wax Cast Bronze products have hand applied patina finishes that will gracefully age showing highlights of the underlying bronze over time. Prices: Prices are subject to change without prior notice. Warranty: See the last page of this booklet for warranty information. 2

3 Emtek Decorative Hardware Emtek is a registered trademark of Emtek Products, Inc. Trim for Swinging Patio Doors (Multi Point Lock Trim) Door Configuration #1 American Cylinder Hub Below Handle, 35 8 Center to Center ref. Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior Door Configuration #2 American Cylinder Hub Above Handle, 35 8 Center to Center ref. BiltBest, G-U, Hurd (Energy Saver) Door Configuration #3 American Cylinder Hub Above Handle, 41 8 Center to Center ref. Andersen Door Configuration #4 American Cylinder Hub Above Handle, 35 8 Center to Center ref. Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi ), Marvin, PGT, Weathershield Door Configuration #5 Euro Profile Cylinder Below Handle, 35 8 Center to Center ref. Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield Door Configuration #6 American Cylinder Hub Below Handle, 35 8 Center to Center ref. Milgard, Pella Door Configuration #7 American Cylinder Hub Above Handle, 6 Center to Center for doors made by W&F MANUFACTURING (AKA Trillenium ) PAGE Disclaimer: Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retro fitting may be necessary. Please contact Emtek s customer service department to confirm product model. G-U is a registered trademark of G-U Hardware, Inc. Paddock is a registered trademark of Paddock Fabrications, LTD. Pella is a registered trademark of Pella Corporation. Sierra Pacific Windows is a registered trademark of Sierra Pacific Industries. Superior is a registered trademark of Superior Engineered Products Corporation. Willmar is a registered trademark of JELD-WEN of Canada Ltd. Andersen is a registered trademark of Andersen Corporation. Trillenium is a registered trademark of W&F MANUFACTURING. Eagle is a registered trademark of Eagle Window and Door, Inc, BiltBest is a registered trademark of BiltBest Windows and Patio Doors. Ashland is a registered trademark of Ashland Products, Inc. Caradco, JELD-WEN, Norco and Pozzi are registered trademarks of JELD-WEN Inc., Oregon, USA. Integrity and Marvin are registered trademarks of Marvin Windows and Doors. Milgard is a registered trademark of Milgard Windows, Inc. Therma-Tru is a registered trademark of Therma-Tru Doors. HOPPE is a registered trademark of HOPPE North America, Inc. Hurd is a registered trademark of Hurd Millwork Company. Kolbe & Kolbe is a registered trademark of Kolbe & Kolbe Millwork Company, Inc. Lincoln is a registered trademark of Lincoln Wood Products, Inc. Loewen is a registered trademark of Loewen Windows. PGT is a registered trademark of PGT Industries. Peachtree and Vetter are registered trademark of The Peachtree Companies, Inc. Semco is a registered trademark of Semling-Menke Co. Inc. Weathershield is a registered trademark of Weathershield Mfg. Inc. KML by Andersen is a registered trademark of KML by Andersen. Atrium is a registered trademark of Atrium. KFV is a registered trademark of KFV. Simpson is a registered trademark of Simpson. Signature is a registered trademark of Signature. Crestline is a registered trademark of Crestline. Windsor is a registered trademark of Windsor. W&F MANUFACTURING is a registered trademark of W&F MANUFACTURING. With the exception of Paddock, none of the aforementioned companies are affiliated with Emtek Products, Inc.

4 Choose Trimsets For 7 Door & Lock Configurations Both Keyed And Non-Keyed Functions Available For Each Configuration Door Configuration #1 American Cylinder Below Handle 35 8 Center to Center Door Configuration #2 American Cylinder Above Handle 35 8 Center to Center Door Configuration #3 American Cylinder Above Handle 41 8 Center to Center Door Configuration #4 American Cylinder Above Handle 35 8 Center to Center Door Configuration #5 Euro Profile Cylinder Below Handle 35 8 Center to Center Door Configuration #6 American Cylinder Below Handle 35 8 Center to Center > > To determine your Multi-Point Lock configuration: 1) Identify the manufacturer of your patio door and multi-point lock 2) Measure center-to-center hole spacing between lever and the cylinder 3) Check the lever position, is it above or below the cylinder? Door Configuration #7 American Cylinder Hub Above Handle 6 Center to Center 4) Identify the type of cylinder used in the door, is it American or Euro Style Cylinder? 4

5 Brass Lever Options Aireon Lever (A) Cortina Lever (C) Coventry Lever (CV) Elan Lever (EN) Lafayette Brass Lever (LB) Milano Lever (M) Ribbon & Reed Lever (RBL) Rope Lever (RL) Rustic Lever (R) Santa Fe Lever (SF) Turino Lever (T) Wembley Lever (WM) Brass Modern Lever Options Athena Lever (ATN) Basel Lever (BA) Geneva Lever (GV)* Hercules Lever (HEC) Hercules Black Leather Lever (HBK) Hercules Brown Leather Lever (HBN) Helios Lever (HLO) Hermes Lever (HER) Kiel Lever (KIE) Luzern Lever (LU) Mercury Lever (MC) Poseidon Lever (POS) Sion Lever (SIO) Stuttgart Lever (STU) Triton Lever (TRT) * For Single Door Application Only. Stainless Steel Lever Options Athena Lever (AT) Cologne Lever (CO) Dresden Lever (DD) Hercules Lever (HS) Hermes Lever (HE) Kiel Lever (KL) Poseidon Lever (PO) Stuttgart Lever (ST) Sandcast Bronze Lever Options Aurora Lever (AR) Cimarron Lever (CR) Cody Lever (CD) Durango Lever (D) Montrose Lever (MT) Teton Lever (TT) Lost Wax Cast Bronze Lever Options Art Nouveau Lever (ANL) Dakota Black Leather Lever (BLKDK) Dakota Brown Leather Lever (BRNDK) Medici Lever (MDI) Napoli Lever (NA) Octagon Lever (OCL) Padua Lever (PD) 5

6 Door Configuration #1 Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Concord Cortina Lever Brass Concord Milano Lever Brass Petal Elan Lever Brass Petal Lafayette Lever Brass Plates, Concord Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Brass Plates, Petal Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1191EN US7). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 6

7 Door Configuration #1 Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Modern Hercules Lever Stainless Steel Stuttgart Lever Brass Plates, Modern Style 11A1 11A2 11A3 11A4 11A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ B1 11B2 11B3 11B4 11B5 Stainless Steel Plates, Modern Style 11A1 11A2 11A3 11A4 11A5 11B1 11B2 11B3 11B4 11B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W11A1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 7

8 Door Configuration #1 Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Sandcast Arched Durango Lever Sandcast Arched Cody Lever Sandcast Rectangular Durango Lever Sandcast Rectangular Teton Lever Sandcast Bronze Plates, Arched Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Sandcast Bronze Plates, Rectangular Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1151AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $

9 Door Configuration #1 Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Bronze Tuscany Napoli Lever Bronze Tuscany Octagon Lever Lost Wax Cast Bronze Plates, Tuscany Style Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1141ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 9

10 Door Configuration #1 Specification Sheet Components & Door Thickness Door Configuration #1 American Cylinder Below Handle 3 5/8" Center to Center Cylinder Tailpiece Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 10

11 Door Configuration #1 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) Atrium, G-U, KML by Andersen, Marvin Integrity, Paddock Lockmaster, Superior (for Active Door, Schlage Keyway Standard, Weiser Keyway Optional, Rekeyable) 1 1/2 x 11 Plates, s 1111, 1131, 1151, 1171, 1191, 11A1 s, s 1121, 1141, 1161, 1181, 1101, 11B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1112, 1132, 1152, 1172, 1192, 11A2 s, s 1122, 1142, 1162, 1182, 1102, 11B2 Non-Keyed, American Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1113, 1133, 1153, 1173, 1193, 11A3 s, s 1123, 1143, 1163, 1183, 1103, 11B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1114, 1134, 1154, 1174, 1194, 11A4 s, s 1124, 1144, 1164, 1184, 1104, 11B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1115, 1135, 1155, 1175, 1195, 11A5 s, s 1125, 1145, 1165, 1185, 1105, 11B5 11

12 Door Configuration #2 BiltBest, G-U, Hurd (Energy Saver) BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Concord Aireon Lever Brass Concord Turino Lever Brass Petal Rope Lever Brass Petal Ribbon & Reed Lever Brass Plates, Concord Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Brass Plates, Petal Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1291EN US7). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 12

13 Door Configuration #2 BiltBest, G-U, Hurd (Energy Saver) BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Modern Sion Lever Stainless Steel Hercules Lever Brass Plates, Modern Style 12A1 12A2 12A3 12A4 12A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ B1 12B2 12B3 12B4 12B5 Stainless Steel Plates, Modern Style 12A1 12A2 12A3 12A4 12A5 12B1 12B2 12B3 12B4 12B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W12A1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 13

14 Door Configuration #2 BiltBest, G-U, Hurd (Energy Saver) SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Sandcast Arched Durango Lever Sandcast Arched Cody Lever Sandcast Rectangular Teton Lever Sandcast Rectangular Cody Lever Sandcast Bronze Plates, Arched Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Sandcast Bronze Plates, Rectangular Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1251AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $

15 Door Configuration #2 BiltBest, G-U, Hurd (Energy Saver) LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Bronze Tuscany Padua Lever Bronze Tuscany Octagon Lever Lost Wax Cast Bronze Plates, Tuscany Style Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1241ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 15

16 Door Configuration #2 Specification Sheet Components & Door Thickness Door Configuration #2 American Cylinder Above Handle 3 5/8" Center to Center Cylinder Tailpiece Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 16

17 Door Configuration #2 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) BiltBest, G-U, Hurd (Energy Saver) (for Active Door, Schlage Keyway Standard, Weiser Keyway Optional, Rekeyable) 1 1/2 x 11 Plates, s 1211, 1231, 1251, 1271, 1291, 12A1 s, s 1221, 1241, 1261, 1281, 1201, 12B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1212, 1232, 1252, 1272, 1292, 12A2 s, s 1222, 1242, 1262, 1282, 1202, 12B2 Non-Keyed, American Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1213, 1233, 1253, 1273, 1293, 12A3 s, s 1223, 1243, 1263, 1283, 1203, 12B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1214, 1234, 1254, 1274, 1294, 12A4 s, s 1224, 1244, 1264, 1284, 1204, 12B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1215, 1235, 1255, 1275, 1295, 12A5 s, s 1225, 1245, 1265, 1285, 1205, 12B5 17

18 Door Configuration #3 Andersen BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS Lock body not provided Brass Concord Cortina Lever Brass Plates, Concord Style Other components provided according to function. Brass Petal Elan Lever See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Brass Plates, Petal Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1391EN US7). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 18

19 Door Configuration #3 Andersen BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Lock body not provided Brass Modern Hercules Lever Brass Plates, Modern Style Other components provided according to function. Stainless Steel Stuttgart Lever 13A1 13A2 13A3 13A4 13A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ B1 13B2 13B3 13B4 13B5 Stainless Steel Plates, Modern Style 13A1 13A2 13A3 13A4 13A5 13B1 13B2 13B3 13B4 13B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W13A1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 19

20 Door Configuration #3 Andersen SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Lock body not provided Sandcast Arched Durango Lever Sandcast Bronze Plates, Arched Style Other components provided according to function. Sandcast Rectangular Durango Lever Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Sandcast Bronze Plates, Rectangular Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1351AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. $

21 Door Configuration #3 Andersen LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Lock body not provided Bronze Tuscany Napoli Lever Other components provided according to function. Lost Wax Cast Bronze Plates, Tuscany Style Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1341ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 21

22 Door Configuration #3 Specification Sheet Components & Door Thickness Door Configuration #3 American Cylinder Above Handle 4 1/8" Center to Center Cylinder Tailpiece Includes special mounting hardware Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 22

23 Door Configuration #3 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) Andersen (for Active Door, Schlage Keyway Standard, Weiser Keyway Optional, Rekeyable) 1 1/2 x 11 Plates, s 1311, 1331, 1351, 1371, 1391, 13A1 s, s 1321, 1341, 1361, 1381, 1301, 13B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1312, 1332, 1352, 1372, 1392, 13A2 s, s 1322, 1342, 1362, 1382, 1302, 13B2 Non-Keyed, American Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1313, 1333, 1353, 1373, 1393, 13A3 s, s 1323, 1343, 1363, 1383, 1303, 13B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1314, 1334, 1354, 1374, 1394, 13A4 s, s 1324, 1344, 1364, 1384, 1304, 13B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1315, 1335, 1355, 1375, 1395, 13A5 s, s 1325, 1345, 1365, 1385, 1305, 13B5 23

24 Door Configuration #4 Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi, 2 x10 plates only), Marvin, PGT, Weathershield BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS See Configuration #1 for Marvin Integrity Doors Brass Concord Aireon Lever Brass Concord Turino Lever Brass Petal Rope Lever Brass Petal Ribbon & Reed Lever Brass Plates, Concord Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Brass Plates, Petal Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1491EN US7). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 24

25 Door Configuration #4 Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi, 2 x10 plates only), Marvin, PGT, Weathershield BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS See Configuration #1 for Marvin Integrity Doors Brass Modern Sion Lever Stainless Steel Stuttgart Lever Brass Plates, Modern Style 14A1 14A2 14A3 14A4 14A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ B1 14B2 14B3 14B4 14B5 Stainless Steel Plates, Modern Style 14A1 14A2 14A3 14A4 14A5 14B1 14B2 14B3 14B4 14B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W14A1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 25

26 Door Configuration #4 Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi, 2 x10 plates only), Marvin, PGT, Weathershield SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS See Configuration #1 for Marvin Integrity Doors Sandcast Arched Cody Lever Sandcast Arched Durango Lever Sandcast Bronze Plates, Arched Style Sandcast Rectangular Durango Lever Sandcast Rectangular Teton Lever Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Sandcast Bronze Plates, Rectangular Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1451AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 26

27 Door Configuration #4 Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi, 2 x10 plates only), Marvin, PGT, Weathershield LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS See Configuration #1 for Marvin Integrity Doors Bronze Tuscany Napoli Lever Bronze Tuscany Napoli Lever Lost Wax Cast Bronze Plates, Tuscany Style Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1441ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 27

28 Door Configuration #4 Specification Sheet Components & Door Thickness Door Configuration #4 American Cylinder Above Handle 3 5/8" Center to Center Cylinder Tailpiece Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 28

29 Door Configuration #4 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) Ashland, Caradco, Jeldwen Custom Collection (formerly Pozzi ), Marvin,PGT, Weathershield (for Active Door, Schlage Keyway Standard, Weiser Keyway Optional, Rekeyable) 1 1/2 x 11 Plates, s 1411, 1431, 1451, 1471, 1491, 14A1 s, s 1421, 1441, 1401, 1481, 1401, 14B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1412, 1432, 1452, 1472, 1492, 14A2 s, s 1422, 1442, 1402, 1482, 1402, 14B2 Non-Keyed, American Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1413, 1433, 1453, 1473, 1493, 14A3 s, s 1423, 1443, 1403, 1483, 1403, 14B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1414, 1434, 1454, 1474, 1494, 14A4 s, s 1424, 1444, 1404, 1484, 1404, 14B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1415, 1435, 1455, 1475, 1495, 14A5 s, s 1425, 1445, 1405, 1485, 1405, 14B5 29

30 Door Configuration #5 Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Concord Cortina Lever Brass Concord Turino Lever Brass Petal Rope Lever Brass Petal Aireon Lever Brass Plates, Concord Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Brass Plates, Petal Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside >> Weiser Keyway not available for Configuration 5, Euro cylinder. 30

31 Door Configuration #5 Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Modern Sion Lever Stainless Steel Stuttgart Lever Brass Plates, Modern Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside 15A1 15A2 15A3 15A4 15A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside 15B1 15B2 15B3 15B4 15B5 Stainless Steel Plates, Modern Style Keyed with Euro Cylinder (Schlage keyway standard, ekeyable) Non-Keyed Euro Style Thumbturn Inside Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside 15A1 15A2 15A3 15A4 15A5 15B1 15B2 15B3 15B4 15B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ >> Weiser Keyway not available for Configuration 5, Euro cylinder. 31

32 Door Configuration #5 Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Sandcast Arched Durango Lever Sandcast Arched Cody Lever Sandcast Rectangular Durango Lever Sandcast Rectangular Durango Lever Sandcast Bronze Plates, Arched Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Sandcast Bronze Plates, Rectangular Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside >> Weiser Keyway not available for Configuration 5, Euro cylinder. 32

33 Door Configuration #5 Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Bronze Tuscany Napoli Lever Bronze Tuscany Medici Lever Lost Wax Cast Bronze Plates, Tuscany Style Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Keyed with Euro Cylinder (Schlage keyway standard, rekeyable) Non-Keyed Euro Style Thumbturn Inside Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Weiser Keyway not available for Configuration 5, Euro cylinder. 33

34 Door Configuration #5 Specification Sheet Components & Door Thickness Door Configuration #5 Euro Cylinder Below Handle 3 5/8" Center to Center Full Euro Cylinder CY4-ERSGL35 Half Euro Cylinder CY4-ERHLF21TT Full Euro Cylinder CY4-ERSGL32 CY4-ERHLF19TT Steel Spindle CY4-ERSGL25 CY4-ERHLF16TT Rosette Screws Cylinder Screw Keyed Plates with Euro Cylinder Standard Door Thickness: 15/8-13/4 Standard Components: 2 5/8 Euro Cylinder 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 17/8-21/4 Extended Components: 3 1/8 Euro Cylinder 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 23/8-23/4 Extended Components: 3 5/8 Euro Cylinder 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates with Euro-Style Half-Cylinder Standard Door Thickness: 15/8-13/4 Standard Components: 1 19/32 Euro Half-Cylinder 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 17/8-21/4 Extended Components: 1 19/32 Euro Half-Cylinder 4 1/2 Steel Spindle 2 Rosette Screws Extended Door Thickness: 23/8-23/4 Extended Components: 2 3/32 Euro Half-Cylinder 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Extended Door Thickness: 21/8-23/4 Standard Components: 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Components: 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 34

35 Door Configuration #5 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) Crestline, Hoppe, Hurd, JELD-WEN, KFV, Kolbe & Kolbe, Lincoln, Loewen, Paddock Lockmaster, Peachtree, Premium Collection (formerly Norco ), Semco, Sierra Pacific, Signature, Simpson, Therma-Tru, Vetter, Willmar, Windsor, Weathershield Keyed with Euro Profile Cylinder (for Active Door, Schlage Keyway Standard, Rekeyable) 1 1/2 x 11 Plates, s 1511, 1531, 1551, 1571, 1591, 15A1 s, s 1521, 1541, 1561, 1581, 1501, 15B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1512, 1532, 1552, 1572, 1592, 15A2 s, s 1522, 1542, 1562, 1582, 1502, 15B2 Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1513, 1533, 1553, 1573, 1593, 15A3 s, s 1523, 1543, 1563, 1583, 1503, 15B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1514, 1534, 1554, 1574, 1594, 15A4 s, s 1524, 1544, 1564, 1584, 1504, 15B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1515, 1535, 1555, 1575, 1595, 15A5 s, s 1525, 1545, 1565, 1585, 1505, 15B5 35

36 Door Configuration #6 Milgard, Pella BRASS TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Concord Cortina Lever Brass Concord Milano Lever Brass Petal Elan Lever Brass Petal Lafayette Lever Brass Plates, Concord Style See Page 5 for Brass & Modern Brass Lever Options. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $ Brass Plates, Petal Style See Page 5 for Brass & Modern Brass Lever Options. >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1691EN US7). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. French Antique (US7) Oil Rubbed Bronze (US10B) Satin Nickel (US15) Pewter (US15A) PVD-Lifetime $

37 Door Configuration #6 Milgard, Pella BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Modern Sion Lever Stainless Steel Hercules Lever Brass Plates, Modern Style 16A1 16A2 16A3 16A4 16A5 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ B1 16B2 16B3 16B4 16B5 Stainless Steel Plates, Modern Style 16A1 16A2 16A3 16A4 16A5 16B1 16B2 16B3 16B4 16B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W16A1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. $

38 Door Configuration #6 Milgard, Pella SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Sandcast Arched Durango Lever Sandcast Arched Cody Lever Sandcast Rectangular Durango Lever Sandcast Rectangular Teton Lever Sandcast Bronze Plates, Arched Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Sandcast Bronze Plates, Rectangular Style Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1651AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 38

39 Door Configuration #6 Milgard, Pella LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Bronze Tuscany Napoli Lever Bronze Tuscany Octagon Lever Lost Wax Cast Bronze Plates, Tuscany Style Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1641ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 39

40 Door Configuration #6 Specification Sheet Components & Door Thickness Door Configuration #6 American Cylinder Below Handle 3 5/8" Center to Center Cylinder Tailpiece Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 1/16 Inclusive Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 1/16 Inclusive Standard Components: Single Cylinder Tailpiece 3 3/4 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 4 1/2 Steel Spindle (half-spindle for fixed handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 40

41 Door Configuration #6 Specification Sheet Trim & Cylinders for Multi Point Locks Swinging Patio Door Hardware - Set includes Plates, Handles and Cylinders (where applicable) Milgard, Pella (for Active Door, Schlage Keyway Standard, Weiser Keyway Optional, Rekeyable) 1 1/2 x 11 Plates, s 1611, 1631, 1651, 1671, 1691, 16A1 s, s 1621, 1641, 1661, 1681, 1601, 16B1 Non-Keyed, Passage (for Semi-Active Door) 1 1/2 x 11 Plates, s 1612, 1632, 1652, 1672, 1692, 16A2 s, s 1622, 1642, 1662, 1682, 1602, 16B2 Non-Keyed, American Style Thumbturn Inside (for Active Door) 1 1/2 x 11 Plates, s 1613, 1633, 1653, 1673, 1693, 16A3 s, s 1623, 1643, 1663, 1683, 1603, 16B3 Non-Keyed, Handle Outside, Operating Handle Inside (for Semi-Active Door) 1 1/2 x 11 Plates, s 1614, 1634, 1654, 1674, 1694, 16A4 s, s 1624, 1644, 1664, 1684, 1604, 16B4 (for Non-Active Door) 1 1/2 x 11 Plates, s 1615, 1635, 1655, 1675, 1695, 16A5 s, s 1625, 1645, 1665, 1685, 1605, 16B5 41

42 Door Configuration #7 W&F MANUFACTURING (AKA Trillenium ) BRASS & STAINLESS STEEL TRIM AND CYLINDERS FOR MULTI POINT LOCKS Brass Modern Hercules Lever Stainless Steel Stuttgart Lever Brass Plates, Modern Style 17B1 See Page 5 for Brass & Modern Brass Lever Options. Oil Rubbed Bronze (US10B) Satin Nickel (US15) Polished Chrome (US26) $ Non-Keyed T-turn Inside (Patio Function) 17B3 17B5 Non-Keyed American Style T-turn Inside, Handles 17B6 Stainless Steel Plates, Modern Style Non-Keyed T-turn Inside (Patio Function) 17B1 17B3 17B5 Athena (AT) Cologne(CO) Dresden (DD) Hercules (HS) Hermes (HE) Kiel (KL) Poseidon (PO) Stuttgart (ST) Stainless Steel (SS) $ Non-Keyed American Style T-turn Inside, Handles 17B6 >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W17B1AT SS). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 42

43 Door Configuration #7 W&F MANUFACTURING (AKA Trillenium ) SANDCAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Sandcast Arched Durango Lever Sandcast Rectangular Teton Lever Sandcast Bronze Plates, Arched Style Non-Keyed T-turn Inside (Patio Function) Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Non-Keyed American Style T-turn Inside, Handles 1726 Sandcast Bronze Plates, Rectangular Style Non-Keyed T-turn Inside (Patio Function) Aurora (AR) Cimarron (CR) Cody (CD) Durango (D) Montrose (MT) Teton (TT) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Non-Keyed American Style T-turn Inside, Handles 1766 >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1761AR DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 43

44 Door Configuration #7 W&F MANUFACTURING (AKA Trillenium ) LOST WAX CAST BRONZE TRIM AND CYLINDERS FOR MULTI POINT LOCKS Bronze Tuscany Medici Lever Bronze Tuscany Napoli Lever Lost Wax Cast Bronze Plates, Tuscany Style Non-Keyed T-turn Inside (Patio Function) Art Nouveau (ANL) Dakota with Black Leather (BLKDK) Dakota with Brown Leather (BRNDK) Medici (MDI) Napoli (NA) Octagon (OCL) Padua (PD) Deep Burgundy (DB) Flat Black (FB) Medium Bronze (MB) Silver Patina (SP) $ Non-Keyed American Style T-turn Inside, Handles 1746 >> Specify by adding "W" to the beginning of for Weiser (WR5) Keyway (For example: W1741ANL DB). No upcharge for cylinder substitution. Can be keyed into existing Weiser system. 44

45 Door Configuration #7 Specification Sheet Trim & Cylinders for Multi Point Locks Door Configuration #7 American Cylinder Above Handle 6" Center to Center Cylinder Tailpiece Steel Spindle Rosette Screws Keyed Plates with American Cylinder Includes non-keyed, thumbturn inside Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 2 Steel Spindles 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 2 Steel Spindle 2 1/2 Rosette Screws Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only) Standard Door Thickness: 15/8-2 Standard Components: Single Cylinder Tailpiece 2 Steel Spindle (Handle out/operating handle in) 2 Rosette Screws Extended Door Thickness: 21/8-23/4 Extended Components: Long Single Cylinder Tailpiece 2 Steel Spindle (Handle out/operating handle in) 2 1/2 Rosette Screws CONSTRUCTION KEYING Lost ball system. Last four pin locations drilled for lost ball application. Master key wafers used for code variability. Construction keys and owner keys sent separately. Order by indicating Construction Keyed, House #_ next to applicable locks. Construction devices used on one or all of last four positions. Dimples drilled in plug in this position. Charge for Construction Keying - $4.00 per Cylinder (List) Locks that are both construction keyed and keyed alike in a house group will be charged a total of $8.00 (list) per cylinder. Charge for Re-Keying - $4.00 per Cylinder (List) Locks that are keyed to code or keyed alike in a house group will be charged $4.00 (list) per cylinder. Keying to Code Order by indicating Key Code XXXXX next to applicable locks. Keying Alike Order by indicating Keyed Alike next to applicable locks if only one keyed alike group is wanted. If ordering multiple groups (houses) indicate Keyed Alike House #_ next to applicable locks. 45