IP Network Audio System IP-8000

Transcription

1 IP Network Audio System IP System Background music system, zone paging system and voice alarm all PA system functions are included in this IP network audio system. Flexible matrix background music system to different zones with different music programs simultaneously. Different call stations enable to speech to different zone loudspeakers simultaneously. Pre-recorded voice message automatically broadcast and override BGM & paging in any emergency situation. Ideal solution for multiple sources and multiple room sound system, minimum cable layout cost with much more functions than analog system. Low cost for set up and no cost for maintenance. The system could be built up over existing LAN/ WAN & Internet network, no need dedicated network. Free on-line system set up and diagnose, each equipments status online monitoring and failure alert. Optional function: Telephone paging system, power management, program scheduled control, duplex two way intercom system, inter-work with third party system like CCTV, door access, parking system etc. Capacity of input local analog sources from terminal adapter directly over network. Network data delay is less than 30 milliseconds. Capacity of 300 terminal adapters online with 300 different programs simultaneously. Sound output quality level nearly to CD level of 44.1k, 16bits. Each online program takes only about 0.1Mkbps band width. Backup system of server and embedded controller to standby the system to avoid any failure. Industrial chip to support 24 hours run on and anti-virus technology. Page 1 of 19

2 IP Network Audio System Management Software IP-8000SF Center of IP network audio system and IP PA system. Support Windows 2000, Windows 2008, Windows XP, Windows 7. All display in English. Built-in system set up, system monitor, media player, program timer, system memory functions. Cloud broadcast Mp3 file online, scheduled and matrix at pre-set time to designated loudspeaker zones. All equipments working status could be monitored and displayed on this software. Flexible multiple level loudspeaker zone definitions, end-user can define loudspeakers into as many as possible zones at the same time. Built-in weekly timer could broadcast pre-recorded voice message, bell, song to selected zones by trigger contact or manually operation. The head equipment to encode analog sources into digital source to be transferred over network. Support max 5 different sound cards for simultaneously sources collection. One software packet include administrator and branch server and alarm server. Graphic maps display for visually simple monitoring and operation. Applications: Factory, Prison, Bank & Hospital Page 2 of 19

3 IP Network Remote Microphone IP-8000RM : The IP network call station is the main equipments to set up a network PA sound system. With this call station, it is enable to make live speech to any selected zones, while the built-in colorful LCD could display the zone status. The call station is built-in microphone, monitor speaker so as two way intercom communication is available. There is built-in chime before announcement, gooseneck red ring indicator light on means microphone is working. Support more than 300 call stations for one system, each call station could be set up with nine levels of different priorities. It is designed with one aux input and e aux output. It is powered by DC 9V, so a DC power adapter is included in the packing. Support LAN/WAN and Internet network. Feature: The IP network call station is the head of paging system. Individual zone, group zones, selected zones and all zones different paging modes. Max support 300 call stations working at the same time. Built-in LCD in English display status, power and zone selection. Built-in microphone, monitor speaker for two way intercom use. With eight zone selector, microphone on and number buttons. With nine levels of priority. Start time less than 0.1 second. With one aux input and one aux output for external active speaker for monitor use. It is powered by DC9V, the power adapter is included. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. Specification: Network Speed Display Dimensions IP-8000RM IP 8 Zone Call Station DC 9V 5W Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits 90dB 20Hz-20KHz 100 milliseconds FTF 1.8 colorful LCD, resolution One aux input, one aux output & one RJ45 port for LAN 245(W) 122(D) 66(H)mm Page 3 of 19

4 IP Network 8 Zone Audio Adapter IP-8000DA : The IP network 8 zone audio adapter with decoder is the main equipment of the IP network PA system. It is built-in decoder which can decode the network audio signal into analog to feed in analog amplifier. It is also built-in an eight zone speaker selector can split one amplifier into 8 zones to power different loudspeaker zones. The IP network 8 zone audio adapter with decoder is ideal sound system solution for multiple room sound system, it could be set up over existing network LAN/WAN and internet work, support more than 300 decoders online at the same time. There are eight zone contact outputs to third party for zone status monitoring. It is designed in 1U height of rack mount. Program controllable power supply of AC 230V or 110V. Feature: The IP network 8 zone audio adapter with decoder is the head of IP PA system. The IP network audio adapter with decoder is built-in 8 zone speaker selector. The IP network 8 zone audio adapter with decoder can split one PA 100 volt amplifier into 8 loudspeaker zones. It is high capacity but cost-effective multiple room network sound system. The system could be set up over existing network, non dedicated network is needed. System capacity of 300 adapters online simultaneously. Eight zone contact outputs for zone status monitoring. 1U height of rack mount design. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. Program controllable power supply of AC 230V or 110V. Specification: Network Speed Dimensions Weight IP-8000DA IP Network 8 Zone Audio Adapter AC230V or 110V 5W Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits, 8K-320Kbps 90dB 20Hz-20KHz 100 milliseconds One aux input, one aux output, eight zone contact outputs, one RJ45 input, one 100V power input, 8 zone 100V speaker outputs, one programmable power socket mm 3.2kg Page 4 of 19

5 IP Network 8 Zone Audio Adapter IP-8000DA Rear Panel: System Connection Diagram: Page 5 of 19

6 IP Network 20W Wall Mount Amplifier IP-8000AM The head of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Built-in decode adapter and low impedance digital class-d 20W low impedance power amplifier. Multiple music programs could be matrix distributed from server to different zones. The IP network amplifier could be built-up over existing LAN/WAN network system, non-dedicated network system is needed. High speed ARM and DSP two chips to ensure minimum data delay. Start time is less than 1 second. With one line input for local audio source input and one line output for external amplifier. With one contact output and one contact input. The contact output could be override the volume control 24V relay. Support LAN/WAN, Ethernet system, support over gateway and over router. Option to work with wall mount channel selector and volume control IP-8000CS through CAT5 cable. Network Chip Speed Power Output Dimension IP-8000AM IP Network 20W Wall Mount Amplifier AC230V or 115V, 50-60Hz 22W Mp2/Mp3/PCM/ADPCM 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps 20W, low impedance >90dB 20-20KHz <100ms line input, line output, contact input, contact output mm Applications: School, SPA, fitness center, hotel & hospital multiple room multiple music sound system. Page 6 of 19

7 IP Network Wall Control Panel IP-8000CS Digital wall control panel to work with IP-8000AM Communication distance up to 10 meters through CAT5 cable The Wall control panel is powered by IP-8000AM at DC5V With 2 bits LED display the output volume and the input channel To be installed in multiple rooms for end-user to select different programs at controllable volume Support 16 levels of volume control Support 32 online network programs selection IP-8000CS IP Network Wall Control Panel DC5V powered by the amplifier 1W Protocol RS485 Communication Distance 10ms Cable CAT5 or CAT6 Volume Level 16 Channel 32 RJ45 port Dimension 86(W) 86(D) 50(H)mm Applications: School, SPA, fitness center, hotel & hospital multiple room multiple music sound system. Page 7 of 19

8 IP Network 20W Wall Mount Amplifier IP-8000AP The head of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Built-in decode adapter and low impedance digital class-d 20W low impedance power amplifier. Multiple music programs could be matrix distributed from server to different zones. The IP network amplifier could be built-up over existing LAN/WAN network system, non-dedicated network system is needed. Start time is less than 1 second. Design with 3 colorful LCD in English display. With remote control to select program from server to be broadcasted on its local speaker zone. Built-in microphone sensor to monitor the on-site activities. With one local line input and one local microphone input. Priority from high to low: network program, local microphone input and local line input. DC12V power supply. Network Chip Speed Screen Display Power Output Dimension IP-8000AP IP Network 20W Wall Mount Amplifier DC12V 25W Mp2/Mp3/PCM/ADPCM 3 colorful LCD English, resolution 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps 2 10W, low impedance >90dB 20-20KHz <100ms Mic input, line input, line output, low impedance speaker outputs, one contact output 256(W) 186(D) 50(H)mm Applications: School, SPA, fitness center, hotel & hospital multiple room multiple music sound system. Page 8 of 19

9 IP Network PA Amplifier (60W) IP-8060AMP The head of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Built-in IP network audio adapter and PA 60W digital Class-D power amplifier in 1U. Multiple music programs could be matrix distributed from server to different zones. Built-up over existing LAN/WAN network system, non-dedicated network system is needed. Start time is less than 1 second. Design with 3 colorful LCD in English display. 3 mic inputs, 2 aux inputs and 1 line output. With 100V speaker outputs by screw terminal. Mic1 input on front panel with VOX priority. Separate volume and tone control for each 5 inputs. The output priority level from sources, network program are editable. With short circuit contact output for relay or communication with third party system. Support LAN/WAN, Ethernet system, support over gateway and over router. Rated Power Output Network Chip Speed Screen Display Speaker Output Dimension & Weight Rear Panel: IP-8060AMP IP Network PA Amplifier 60W AC230V or 115V, 50-60Hz 80W Mp2/Mp3/PCM/ADPCM 3 colorful LCD English, resolution 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps 100V speaker output by screw terminal >90dB 20-20KHz <100ms 3 Mic input, 2 aux input, 1 line output,100v speaker outputs, one contact output 483(W) 256(D) 44mm(H), 9.8kg Page 9 of 19

10 IP Network PA Amplifier (120W) IP-8120AMP The head of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Built-in IP network audio adapter and PA 120W digital Class-D power amplifier in 1U. Multiple music programs could be matrix distributed from server to different zones. Built-up over existing LAN/WAN network system, non-dedicated network system is needed. Start time is less than 1 second. Design with 3 colorful LCD in English display. 3 mic inputs, 2 aux inputs and 1 line output. With 100V speaker outputs by screw terminal. Mic1 input on front panel with VOX priority. Separate volume and tone control for each 5 inputs. The output priority level from sources, network program are editable. With short circuit contact output for relay or communication with third party system. Support LAN/WAN, Ethernet system, support over gateway and over router. Rated Power Output Network Chip Speed Screen Display Speaker Output Dimension & Weight Rear Panel: IP-8120AMP IP Network PA Amplifier 120W AC230V or 115V, 50-60Hz 150W Mp2/Mp3/PCM/ADPCM 3 colorful LCD English, resolution 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps 100V speaker output by screw terminal >90dB 20-20KHz <100ms 3 Mic input, 2 aux input, 1 line output,100v speaker outputs, one contact output 483(W) 256(D) 44mm(H), 11kgs Page 10 of 19

11 IP Network PA Amplifier (240W) IP-8240AMP The head of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Built-in IP network audio adapter and PA 240W digital Class-D power amplifier in 1U. Multiple music programs could be matrix distributed from server to different zones. Built-up over existing LAN/WAN network system, non-dedicated network system is needed. Start time is less than 1 second. Design with 3 colorful LCD in English display. 3 mic inputs, 2 aux inputs and 1 line output. With 100V speaker outputs by screw terminal. Mic1 input on front panel with VOX priority. Separate volume and tone control for each 5 inputs. The output priority level from sources, network program are editable. With short circuit contact output for relay or communication with third party system. Support LAN/WAN, Ethernet system, support over gateway and over router. Rated Power Output Network Chip Speed Screen Display Speaker Output Dimension & Weight Rear Panel: IP-8240AMP IP Network PA Amplifier 240W AC230V or 115V, 50-60Hz 280W Mp2/Mp3/PCM/ADPCM 3 colorful LCD English, resolution 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps 100V speaker output by screw terminal >90dB 20-20KHz <100ms 3 Mic input, 2 aux input, 1 line output,100v speaker outputs, one contact output 483(W) 256(D) 44mm(H), 13kgs Page 11 of 19

12 IP Network Active Wall Mount Speaker IP-8020S Feature: The IP network speaker is built-in network audio adapter, built-in 20W Class-D amplifier. All in one IP network audio solution for school, hotel, hospital and bank. The system configuration will be: server, paging microphone, active IP speaker, these main three equipments can set up a basic IP PA system include background music, scheduled ring bell, remote paging. Different music or voice message programs for different rooms. Ideal for multiple room and multiple sources digital audio matrix BGM and paging system. The system could be set up over existing network, non dedicated network is needed. Digital IP/TCP addressable active speaker built-in digital 20W low impedance amplifier. One aux input and one line output, one RJ45 port input for LAN/WAN network. DC 24V power supply by AC power adapter. System capacity of 300 pairs of network active speaker online simultaneously. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. The IP network active speaker package includes one active speaker and one passive wall mount speaker. Specification: IP-8020SK IP Network Active Wall Mount Speaker DC24V Power Output RMS 2 10W 30W Network Speed Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits, 8K-320Kbps 90dB 190Hz-18KHz 100 milliseconds One aux input, one aux output, one RJ45 input, one DC24V input. Finish Wooden in white Dimensions 248(W) 156(D) 146(H)mm Weight 1.2kg Applications: School, university, hotel, fitness center. Page 12 of 19

13 IP Network Active Wall Mount Speaker IP-8060S Feature: The IP network speaker is built-in network audio adapter, built-in 60W Class-D amplifier. All in one IP network audio solution for school, hotel, hospital and bank. The system configuration will be: server, paging microphone, active IP speaker, these main three equipments can set up a basic IP PA system include background music, scheduled ring bell, remote paging. Different music or voice message programs for different rooms. Ideal for multiple room and multiple sources digital audio matrix BGM and paging system. The system could be set up over existing network, non dedicated network is needed. Digital IP/TCP addressable active speaker built-in digital 60W low impedance amplifier. One aux input and one line output, one RJ45 port input for LAN/WAN network. DC 24V power supply by AC power adapter. System capacity of 300 pairs of network active speaker online simultaneously. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. The IP network active speaker package includes one active speaker and one passive wall mount speaker. Specification: IP-8060SK IP Network Active Wall Mount Speaker DC24V Power Output RMS 2 30W 50W Network Speed Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits, 8K-320Kbps 90dB 190Hz-18KHz 100 milliseconds One aux input, one aux output, one RJ45 input, one DC24V input. Finish Wooden in white Dimensions 248(W) 156(D) 146(H)mm Weight 1.3kg Applications: School, university, hotel, fitness center. Page 13 of 19

14 IP Network Outdoor Active Column Speaker IP-8030CS Feature: The IP network speaker is built-in network audio adapter, built-in 30W Class-D amplifier. The weatherproof active column speaker is ideal for playground, park, garden, factory, train station and airport outdoor area PA system, background music system, paging system and voice alarm system use. The system configuration will be: server, paging microphone, active IP speaker, these main three equipments can set up a basic IP PA system include background music, scheduled ring bell, remote paging. Different music or voice message programs for different rooms. Ideal for multiple rooms and multiple sources digital audio matrix BGM and paging system. The system could be set up over existing network, non dedicated network is needed. Digital IP/TCP addressable active speaker built-in digital 30W low impedance amplifier. One RJ45 port input for LAN/WAN network. DC 24V power supply by AC power adapter. System capacity of 300 pairs of network active speaker online simultaneously. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. The IP network active column speaker is made of aluminum waterproof finish. Waterproof rate of IP66 for complete exposed to outdoor environment. The IP network active speaker is supplied with stainless mounting bracket. Specification: Power Output Network Speed Finish IP Rate Dimensions Weight IP-8030CS IP Network Outdoor Active Column Speaker DC24V RMS 30W 40W Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits, 8K-320Kbps 90dB 190Hz-18KHz 100 milliseconds One RJ45 input, one DC30V input. Aluminum in white IP66 490(W) 86(D) 82(H)mm 2.5kg Page 14 of 19

15 IP Network Outdoor Active Column Speaker IP-8040CS Feature: The IP network speaker is built-in network audio adapter, built-in 40W Class-D amplifier. The weatherproof active column speaker is ideal for playground, park, garden, factory, train station and airport outdoor area PA system, background music system, paging system and voice alarm system use. The system configuration will be: server, paging microphone, active IP speaker, these main three equipments can set up a basic IP PA system include background music, scheduled ring bell, remote paging. Different music or voice message programs for different rooms. Ideal for multiple rooms and multiple sources digital audio matrix BGM and paging system. The system could be set up over existing network, non dedicated network is needed. Digital IP/TCP addressable active speaker built-in digital 40W low impedance amplifier. One RJ45 port input for LAN/WAN network. DC 24V power supply by AC power adapter. System capacity of 300 pairs of network active speaker online simultaneously. Support LAN/WAN and Internet network. Network data delay of less than 100 milliseconds. The IP network active column speaker is made of aluminum waterproof finish. Waterproof rate of IP66 for complete exposed to outdoor environment. The IP network active speaker is supplied with stainless mounting bracket. Specification: Power Output Network Speed Finish IP Rate Dimensions Weight IP-8040CS IP Network Outdoor Active Column Speaker DC24V RMS 40W 50W Mp2, Mp3, PCM, ADPCM 8KHz-44.1KHz, 16 bits, 8K-320Kbps 90dB 190Hz-18KHz 100 milliseconds One RJ45 input, one DC30V input. Aluminum in white IP66 600(W) 86(D) 82(H)mm 3.1kg Page 15 of 19

16 IP Network Fire Alarm Panel IP-8000FA Interface between fire alarm and IP network audio system. Automatically broadcast the pre-recorded voice alarm message once triggered by the closed contact from the fire alarm center. Different zone trigger could be assigned with different voice messages. The multiple pre-recorded voice messages are stored in the server or controller. The fire alarm center send the fire alarm closed contact to this fire alarm panel, which will communicate with the server through the LAN RJ45 port, the server will give command to generate which pre-set voice message to be broadcasted to which speaker zone output. One fire alarm panel support 32 speaker zones. The fire alarm panel capable for both IP network PA and intercom system. Each IP network audio system support more than 20 units working together for more than 6,400 speaker zones. The fire alarm panel could be built-up over existing LAN/WAN network, non-dedicated network is needed. System Capacity Dimension Weight IP-8000FA IP Network Fire Alarm Panel AC110V or 220V, 50-60Hz 3200 Zones 15W 32 closed contact input, 8 closed contact output, one RJ45 port for LAN/WAN network 483(W) 256(D) 44(H)mm 2.2kg Rear Panel Page 16 of 19

17 IP Network Telephone Paging Interface IP-8000PABX Interface between PABX and IP network audio system. Ideal system for remote telephone announcement system. Suitable for remote phone call for emergency announcement. The telephone line will be connected to this telephone paging interface, once this telephone number was called, the caller could enable access to make announcement over the PA system after enter password. The telephone paging system with priority override background music and microphone paging system. Automatically paging from telephone system over PA system. With English message menu and password security check in. Capacity of separate zone, group zones and all zones telephone call. One port for PABX or telephone exchange, one port for telephone line and one port for LAN/WAN network. Call will be automatically terminated once the phone is hang off. Support telephone call over LAN/WAN and Ethernet. Dimension Weight IP-8000PABX IP Network Telephone Paging Interface AC110V or 220V, 50-60Hz 20W mm 2.2kg Rear Panel: Page 17 of 19

18 IP Network Master Controller IP-8000MC The master controller of IP network audio system. Ideal solution for small size multiple room network audio system like school, office and hospital. Multiple music programs could be matrix distributed from server to different zones. The IP network amplifier could be built-up over existing LAN/WAN network system, non-dedicated network system is needed. Design by real time embedded OS. Capacity of working stand alone from PC server. Fully back up the system to run once the PC server fails. Start time is less than 2 seconds. Design with 4 English colorful LCD, with menu control buttons. Capacity of 1,000 network adapters simultaneously online. Built-in audio encoder to encode the analog sources into network program, whose online data processing delay less than 10 ms. Built-in weekly timer to program pre-recorded message file from SD memory card to be timely broadcasted to the pre-set zone. Support IP PABX and IP voice alarm system when server disabled. With contact input and contact output for third party system. With one emergency microphone input on front panel with priority. With one line input and one line output. With SD card input as programmable sources. 19 rack mount design in 2U height. Network Chip Speed Screen Display Dimension Weight IP-8000MC IP Network Master Controller AC230V or 115V, 50-60Hz 5W Mp2/Mp3/PCM/ADPCM 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps English 4 colorful LCD, resolution >90dB 20-20KHz <100ms Mic input, line input, line output, two contact inputs and one contact output, one RS422 interface 483(W) 256(D) 88(H)mm 5.6kg Page 18 of 19

19 IP Network Mixing Console IP-8000MX The eight channel IP network mixing console for input sources player. Multiple sources feed in and then matrix distributed from server to different zones. The IP network mixing console could be built-up over existing LAN/WAN network system, non-dedicated network system is needed. Built-in 5 colorful English LCD screen in English display, start time less than one second. 8 channel inputs include 3 mic/line inputs, 1 EMC input, 4 stereo line inputs, each input with separate volume and bass/treble tone control. With 3 channel outputs include one line output and two monitor earphone 3.5mm outputs. Over network to transfer the sources to separated zone, group zones and all zones simultaneously. With SD input to insert the life program over network. With eight programmable buttons as shortcut keys (pre-set sources to designated zone). Support LAN/WAN, Ethernet system, support over gateway and over router. Network Chip Speed Screen Display Dimension Weight IP-8000MX IP Network Mixing Console AC230V or 115V, 50-60Hz 15W Mp2/Mp3/PCM/ADPCM 8KHz-44.1kHz, 16bits, 8Kbps-32Kbps English 5 colorful LCD, resolution >90dB 20-20KHz <100ms 3 Mic/line, 1 EMC, 4 line inputs, 1 line output and 2 monitor earphone output 482(W) 266(D) 138(H)mm 5.2kg Page 19 of 19