MEDIUM RANGE BRASS AND STAINLESS FLOW METERS
|
|
|
- Lindsay White
- 7 years ago
- Views:
Transcription
1 BULLETIN EM V MEDIUM RANGE BRASS AND STAINLESS FLOW METERS V Incorporating traditional rotameter precision glass technology, these rugged brass and stainless steel flow meters offer accurate and economical solutions to medium flow range measurements. V meters are designed with unique rotatable scales of dual air-water direct reading graduations showing SCFM and L/min (air), as well as GPM and LPM (water) markings. Panel Mount Meter with Valve design features Rigid, compact construction. Dual, rotatable direct reading scales for air and water. Graduations reflect both metric and English systems. Vertical In-line or Panel Mount. Flow ranges from 4 to 20 L/min water and 140 to 900 L/min air. Rotatable, direct reading air, (SCFM-L/min) and water (GPM-LPM). ±5% of full scale. MAXIMUM TEMPERATURE 250 F F (121 F C). MAXIMUM PRESSURE 150 psig (@ 200 F F). TUBE SHIELDS Polycarbonate FLOATS Type 316 stainless steel. WETTED PARTS Brass or type 316 stainless steel. SEALS Viton standard. OPTIONAL: Buna-N, PTFE /Kalrez and EPR. Ordering information see page 42. In-line Meter with Valve 40
2 V MEDIUM RANGE PTFE FLOW METERS Incorporating traditional variable area precision glass technology, these rugged PTFE flow meters offer accurate and economical solutions to medium flow range measurements. V meters are designed with unique rotatable scales of dual air-water direct reading graduations showing SCFM and L/min (air), as well as GPM and LPM (water) markings. LEAK INTEGRITY Flow meters are individually tested on a Mass Spectrometer Leak Detector and certified to a leak integrity rating of 1 x 10-7 sccs Helium or better. Rotatable, direct reading air, (SCFM-L/min) and water (GPM-LPM). Scale length is 127mm (nominal). +5% of full scale. MAXIMUM TEMPERATURE 150 F F (65 F C.) MAXIMUM PRESSURE 100 psig (6.7) bars. LEAK INTEGRITY Individually leak tested and certified. TUBE SHIELDS Polycarbonate. FLOATS PTFE. WETTED PARTS PTFE, PCTFE. SEALS PTFE. Ordering information see page BULLETIN EM V
3 ORDERING INFORMATION MEDIUM RANGE FLOW METERS V VIB4-VA-V01-01-ST VIB3-VA-V01-01-ST Brass VIB4-VA-V02-01-ST VIB3-VA-V02-01-ST Brass VIB4-VA-V03-01-ST VIB3-VA-V03-01-ST Brass VIB4-VA-V04-01-ST VIB3-VA-V04-01-ST Brass VIB4-VA-V05-01-ST VIB3-VA-V05-01-ST Brass VIS4-VA-V01-01-ST VIS3-VA-V01-01-ST 316 s.s VIS4-VA-V02-01-ST VIS3-VA-V02-01-ST 316 s.s VIS4-VA-V03-01-ST VIS3-VA-V03-01-ST 316 s.s VIS4-VA-V04-01-ST VIS3-VA-V04-01-ST 316 s.s VIS4-VA-V05-01-ST VIS3-VA-V05-01-ST 316 s.s VPB4-VA-V01-02-ST VPB3-VA-V01-02-ST Brass VPB4-VA-V02-02-ST VPB3-VA-V02-02-ST Brass VPB4-VA-V03-02-ST VPB3-VA-V03-02-ST Brass VPB4-VA-V04-02-ST VPB3-VA-V04-02-ST Brass VPB4-VA-V05-02-ST VPB3-VA-V05-02-ST Brass VPS4-VA-V01-02-ST VPS3-VA-V01-02-ST 316 s.s VPS4-VA-V02-02-ST VPS3-VA-V02-02-ST 316 s.s VPS4-VA-V03-02-ST VPS3-VA-V03-02-ST 316 s.s VPS4-VA-V04-02-ST VPS3-VA-V04-02-ST 316 s.s VPS4-VA-V05-02-ST VPS3-VA-V05-02-ST 316 s.s PTFE METERS VIT4-TA-V06-01-TF VIT3-TA-V06-01-TF PTFE VIT4-TA-V07-01-TF VIT3-TA-V07-01-TF PTFE VIT4-TA-V08-01-TF VIT3-TA-V08-01-TF PTFE VIT4-TA-V09-01-TF VIT3-TA-V09-01-TF PTFE VIT4-TA-V10-01-TF VIT3-TA-V10-01-TF PTFE VIT4-TA-V11-01-TF VIT3-TA-V11-01-TF PTFE BULLETIN EM V PTFE VPT4-TA-V06-02-TF VPT3-TA-V06-02-TF PTFE VPT4-TA-V07-02-TF VPT3-TA-V07-02-TF PTFE VPT4-TA-V08-02-TF VPT3-TA-V08-02-TF PTFE VPT4-TA-V09-02-TF VPT3-TA-V09-02-TF PTFE VPT4-TA-V10-02-TF VPT3-TA-V10-02-TF PTFE VPT4-TA-V11-02-TF VPT3-TA-V11-02-TF PTFE
4 xv DIRECT READING MULTI-GAS FLOW METERS Incorporating traditional rotameter precision glass technology, these rugged brass and stainless steel flow meters offer accurate and economical solutions to medium flow range measurements. xv meters are designed with unique rotatable scales in either SCFM or L/min. Each features direct reading scales for 5 gases. (Argon, CO 2, He, N 2, & O 2 ). Typical meter shown with rotatable scale drum design features Rigid, compact construction. Multi-gas, rotatable direct reading scales for 5 gases. Graduations reflect metric or English systems. Vertical In-line or Panel Mount. Rotatable, direct reading Argon, CO2, He, N2, & O2. ±5% of full scale. MAXIMUM TEMPERATURE 250 F F (121 F C). MAXIMUM PRESSURE 150 psig (@ 200 F F). TUBE SHIELDS Polycarbonate. FLOATS Type 316 stainless steel. WETTED PARTS Brass or type 316 stainless steel. SEALS Viton standard. OPTIONAL: Buna-N, PTFE /Kalrez and EPR. 43 BULLETIN EM XV
5 BULLETIN EM XV DIRECT READING MULTI-GAS FLOW METERS xv SCFM VIB4-VA-V01-03-ST VIB3-VA-V01-03-ST Brass VIB4-VA-V02-03-ST VIB3-VA-V02-03-ST Brass VIB4-VA-V03-03-ST VIB3-VA-V03-03-ST Brass VIB4-VA-V04-03-ST VIB3-VA-V04-03-ST Brass VIB4-VA-V05-03-ST VIB3-VA-V05-03-ST Brass VIS4-VA-V01-03-ST VIS3-VA-V01-03-ST 316 s.s VIS4-VA-V02-03-ST VIS3-VA-V02-03-ST 316 s.s VIS4-VA-V03-03-ST VIS3-VA-V03-03-ST 316 s.s VIS4-VA-V04-03-ST VIS3-VA-V04-03-ST 316 s.s VIS4-VA-V05-03-ST VIS3-VA-V05-03-ST 316 s.s L/min VIB4-VA-V01-05-ST VIB3-VA-V01-05-ST Brass VIB4-VA-V02-05-ST VIB3-VA-V02-05-ST Brass VIB4-VA-V03-05-ST VIB3-VA-V03-05-ST Brass VIB4-VA-V04-05-ST VIB3-VA-V04-05-ST Brass VIB4-VA-V05-05-ST VIB3-VA-V05-05-ST Brass VIS4-VA-V01-05-ST VIS3-VA-V01-05-ST 316 s.s VIS4-VA-V02-05-ST VIS3-VA-V02-05-ST 316 s.s VIS4-VA-V03-05-ST VIS3-VA-V03-05-ST 316 s.s VIS4-VA-V04-05-ST VIS3-VA-V04-05-ST 316 s.s VIS4-VA-V05-05-ST VIS3-VA-V05-05-ST 316 s.s SCFM VPB4-VA-V01-04-ST VPB3-VA-V01-04-ST Brass VPB4-VA-V02-04-ST VPB3-VA-V02-04-ST Brass VPB4-VA-V03-04-ST VPB3-VA-V03-04-ST Brass VPB4-VA-V04-04-ST VPB3-VA-V04-04-ST Brass VPB4-VA-V05-04-ST VPB3-VA-V05-04-ST Brass VPS4-VA-V01-04-ST VPS3-VA-V01-04-ST 316 s.s VPS4-VA-V02-04-ST VPS3-VA-V02-04-ST 316 s.s VPS4-VA-V03-04-ST VPS3-VA-V03-04-ST 316 s.s VPS4-VA-V04-04-ST VPS3-VA-V04-04-ST 316 s.s VPS4-VA-V05-04-ST VPS3-VA-V05-04-ST 316 s.s L/min VPB4-VA-V01-06-ST VPB3-VA-V01-06-ST Brass VPB4-VA-V02-06-ST VPB3-VA-V02-06-ST Brass VPB4-VA-V03-06-ST VPB3-VA-V03-06-ST Brass VPB4-VA-V04-06-ST VPB3-VA-V04-06-ST Brass VPB4-VA-V05-06-ST VPB3-VA-V05-06-ST Brass VPS4-VA-V01-06-ST VPS3-VA-V01-06-ST 316 s.s VPS4-VA-V02-06-ST VPS3-VA-V02-06-ST 316 s.s VPS4-VA-V03-06-ST VPS3-VA-V03-06-ST 316 s.s VPS4-VA-V04-06-ST VPS3-VA-V04-06-ST 316 s.s VPS4-VA-V05-06-ST VPS3-VA-V05-06-ST 316 s.s
Typical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
automatic Changeover regulators and systems manifolds/changeover regulators
automatic Changeover regulators and systems manifolds/changeover regulators DCHOV1908X012 ACS012 - Low Flow Changeover Regulator maximum inlet pressure: 400 or 3500 psig / 27.6 or 241 bar Four delivery
Water Technologies Wallace & Tiernan Flow Measurement Equipment. Purge, Flow and Varea-Meter Products
Water Technologies Wallace & Tiernan Flow Measurement Equipment Purge, Flow and Products s Product Overview Wallace & Tiernan Flowmeters Accuracy ±Full Scale (10:1 Range) Connections Maximum Operating
Mass Flow Meters & Controllers
HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2% of Full Scale) 0-5 VDC or 4-20
MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter
Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases
Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
Side-Trak 830/840. Process Gas Mass Flow Meters and Controllers. www.sierrainstruments.com
Process Gas Mass Flow Meters and Controllers Features n Direct monitoring of mass flow eliminates need for ancillary pressure and temperature sensing n Patented straight sensor tube with access ports permits
Model DE-3 Air Release Head
SPECIFICATIONS MEASUREMENT SOLUTIONS Model Air Release Head Bulletin SS03037 Issue/Rev. 0.2 (10/15) We put you first. And keep you ahead. SMITH METER AIR ELIMINATOR The Smith Meter Model Air Release Heads
Regulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
Compact, High-Flow Gas Regulators
www.swagelok.com Compact, High-Flow Gas Regulators HF Series Precise pressure control Tamper-free design High-purity design Preset and adjustable dome-loaded models 2 Compact, High-Flow Gas Regulators
EJECTOR AIR REMOVAL SYSTEMS ENGINEERING DATA BULLETIN # PVS-80025201-ARS PAGE 1 OF 5
BULLETIN # PVS-80050-ARS PAGE OF 5 GENERAL Air Removal Systems generally consist of dual 00% (twin-element) ejecrs, single 00% surface-type inter- & aftercondensers, suction & discharge isolation valves
Model 111 Mass Flow Instruments
111 Mass Instruments Porter Mass products reflect over four decades of experience in the design and manufacture of precision instruments for the measurement and control of gas flow. They incorporate design
relief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)
Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.
PRODUCT REVIEW. Flowmeters and Controllers. Vacuum Instrumentation
PRODUCT REVIEW Flowmeters and Controllers Vacuum Instrumentation TELEDYNE HASTINGS VACUUM Instrumentation Thermocouple Gauges ANALOG METERS AND CONTROLLERS - VT Series Three Standard Ranges: 0 to 100 mtorr,
Brooks Models SLA5850, SLA5851, SLA5853 Mass Flow Controllers and Models SLA5860, SLA5861, SLA5863 Mass Flow Meters
Data Sheet Brooks Digital MFC's & MFM's Brooks Models SLA5850, SLA5851, SLA5853 Mass Flow Controllers and Models SLA5860, SLA5861, SLA5863 Mass Flow Meters GENERAL FEATURES Wide FS flow range for measurement
Precision Solenoid Valves
Precision Solenoid Valves Solenoid Valves for gas General Purpose Valves Specialty Solenoid Valves n Didn t see what you re looking for? Let us review your requirements and chances are we can help solve
CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520
CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520 Precise point-of-use chemical flow control innovative flow control technology Overview Entegris is solving today s flow control
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters
FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters M-4270/0707, pg. 2 of 29 READ THIS MANUAL COMPLETELY BEFORE ATTEMPTING TO CONNECT OR OPERATE YOUR FLOW SENSOR. FAILURE TO DO SO MAY
Battery Powered Thermal Mass Flow Meters for Gases
red-y compact series product information Battery Powered Thermal Mass Flow Meters for Gases Digital advantage: Thermal Mass Flow Meters for Gases The flow meters red-y compact series are characterized
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
Process Equipment Catalog Pumping Solutions for Process Industries
Process Equipment Catalog Pumping Solutions for Process Industries Proven Quality. Leading Technology. Table of Contents Process Equipment Buyer s Guide Contents Air-Operated Double Diaphragm Pumps Model
Laminar Flow Elements
Laminar Flow Elements Meriam Laminar Flow Elements (LFEs) are excellent for measuring low gas flow rates from 0.2 SCCM up to 2250 SCFM. They are inherently accurate and repeatable and are calibrated traceable
FLASH TANK ECONOMIZER PRODUCT GUIDE
FLASH TANK ECONOMIZER PRODUCT GUIDE Overview A flash tank is used to recover blowdown energy in the form of flash steam and blowdown. This can only be used with a deaerator or some other pressurized device.
AUTOMATIC CHANGEOVER MANIFOLD Series 915
AUTOMATIC CHANGEOVER MANIFOLD Series 915 FEATURES Fully automatic, simple, hassle-free operation No variance in delivery pressure Designed for ultra high purity gas service Built-in audio and visual alarm
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
Battery Powered Thermal Mass Flow Meters for Gases
red-y compact series product information Battery Powered Thermal Mass Flow Meters for Gases Digital advantage: Thermal Mass Flow Meters for Gases The flow meters red-y compact series are characterized
Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
Flow switches Series AD/VH
Flow switches Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight,
Pressure and Temperature Controls
Pressure and Controls Pressure Reducing Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air and liquid systems safely and efficiently. And assure uninterrupted
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Gas Mass Flow Control Products
Gas Mass Flow Control Products The Standard of Excellence in Mass Flow Porter Mass Flow products reflect over four decades of experience in the design and manufacture of precision instruments for the measurement
Flow Sensors. Convenient, Reliable and Economical Flow Measurement. THORNTON Leading Pure Water Analytics
THORTO Leading Pure Water nalytics Economical Paddlewheel Hi-Purity PF Ultrasonic Vortex Insertion-type Vortex Convenient, Reliable and Economical Flow Measurement Paddlewheel Reliable and Economical Inline
Variable V Area Flowmeter Rotameter The Original
Variable V Area Flowmeter Rotameter The Original 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com precise measurement of liquids
BM SERIES WAVE COMPACT 6.3 GHZ CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz)
CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz) DESCRIPTION The Radar Level Meters of BM COMPACT WAVE 6.3 GHz series are excellent devices for no contact level measurement. The microwave impulses, emitted
Micro oil-mist lubricator, Series NL2-LBM G 1/4
Version Micro oil-mist lubricator, an be assembled into blocks Mounting orientation vertical Working pressure min./max. 0.5 bar / 6 bar Medium ompressed air Neutral gases Medium temperature min./max. -0
Equipment & gas distribution systems. HiQ. Specialty gas program.
Equipment & gas distribution systems. HiQ. Specialty gas program. HiQ equipment and gases Contact your Linde local sales representative for ordering any of the specialty gas catalogues: Automotive Biotech,
Series GM. Magnetic Drive Gear Pump. Product Data Sheet
Product Data Sheet icropump pumps deliver exceptional pumping performance for any high-precision application. These magnetically driven gear pumps feature a cavity style design with benefits such as chemical
Confidential. Proportional reducer D386 ATEX. Male base connector View from weld side
Proportional reducer D386 ATEX Classification according Article 3.3 of European Directive n 97/23/CE from 29/05/1997 Classification according group II, category 2 and temperature class T4 of ATEX Directive
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Ozone Sensor. Model 499A OZ CAUTION CAUTION. Instruction Sheet PN 51A-499AOZ/rev.F January 2007
Instruction Sheet PN 51A-499AOZ/rev.F January 2007 Model 499A OZ Ozone Sensor For additional information, please refer to the Instruction Manuals CD shipped with this product, or visit our website at www.emersonprocess.com/raihome/liquid/.
Variable Area Flowmeters
www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales
Battery Powered Digital Mass Flow Meters for Gases
Next Generation red-y compact: AA Battery Powered Touch Technology Micro-UB Port red-y compact series product information Battery Powered Digital Mass Flow Meters for Gases Independent digital convenience:
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
For Multi-Parameter Meters see mvx
BULLETIN BULLETIN EM20607 VORTEX IN-LINE FLOW METERS Design Features For Multi-Parameter Meters see m Principles of Operation n No moving parts to wear or fail. n Electronics can be remotely mounted up
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases Reliable and accurate: Thermal Mass Flow Meters and Controllers Reliable technology and industry standard interfaces
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow)
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow) Drawing 8c Drawing 9c U391_TA10C_DoP_e_150421 www.hoentzsch.com 1 of 5 Measured
GAS HANDLING SYSTEMS VACUUM INSTRUMENT CORPORATION
GAS HANDLING SYSTEMS VACUUM INSTRUMENT CORPORATION 2099 Ninth Avenue Ronkonkoma, NY 11779 www.vacuuminst.com Smart Charge II An advanced gas backfill and evacuation system with built-in gross leak test.
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Morrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
PORTER MASS FLOW MEASUREMENT AND CONTROL SYSTEMS
PORTER MASS MEASUREMENT AND CONTROL SYSTEMS PORTER: THE STANDARD OF EXCELLENCE IN MASS Porter Mass Flow products reflect nearly three decades of experience in the design and manufacture of precision instruments
OEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
In-Line Electronic Flow Switches
In-Line Electronic Flow Switches Industries Petrochemical Refining Oil Production Water Treatment Pharmaceutical Food and Beverage Pulp and Paper Power Production Gas Processing Mining Biotechnology Semiconductor
FLR 1000 & 1000-BR Series Flow Sensors & Meters For Gases
FLR 1000 & 1000-BR Series Flow Sensors & Meters For Gases READ THIS MANUAL COMPLETELY BEFORE ATTEMPTING TO CONNECT OR OPERATE YOUR FLOW SENSOR. FAILURE TO DO SO MAY RESULT IN INJURY TO YOU OR DAMAGE TO
OPTIMASS 6000 Technical Datasheet
OPTIMASS 6000 Technical Datasheet Sensor for mass flow The high performance meter for process industries Cryogenic, high temperature and high pressure options Supreme liquid and gas performance with CT
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
RECOMMENDED PRACTICE ISA RP16.6 1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters) Approved 30 June 1961 ISA RP16.6 1961, Methods and Equipment for Calibration of Variable
Electronic Wallmount Faucet 1500T4 & 1501T4 Series
Electronic Wallmount Faucet 1500T4 & 1501T4 Series Specification: (example) Battery (4 C cell) or Hardwire (24 VAC) infrared electronic handwash system H 2OPTICS technology no external adjustments required
The Unique Accelabar Flow Meter
The Unique Accelabar Flow Meter The Accelabar is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter.
VSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
Vacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
Industrial Electric Monitors. Industrial
Industrial Electric Monitors Corrosion resistant monitors with maximum travel for optimal coverage in industrial, mining and marine environments. Severe-Duty Monitor 750 GPM (2900 LPM) The Severe-Duty,
ISO 9001 Certified Manufacturing Facility SPECIFICATIONS
TS-250 Rev. 0-00-12-07 Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor
HVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD
HVAC/R GAS TEST GAUGE Hex or Bell Type mounting 5 to00 Psi pressure ranges Steel case and brass internals Use to pressure test all new gas installations for leaks and passing inspection codes. After installing
Micro Motion Model D and DL Coriolis Flow and Density Meters
Product Data Sheet PS-00388, Rev. F April 2013 Micro Motion Model D and DL Coriolis Flow and Density Meters Micro Motion Model D and DL sensors provide flow and density measurement for liquids, gases,
HYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
High pressure reactors Where are your limits?
Laboratory equipment High pressure reactors Where are your limits? Modern high pressure reactors need to be technically safe, reliable, economical in use and simple to operate. With Berghof quality and
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Model # Description Price. Schedule 40 Iron Pipe with Drill Guide Kit - SCFM 9097 Digital Flowmeter for 3"
INDEX EXAIR Optimization................. 1 Electronic Flow Control Digital Flowmeter Digital Sound Level Meter Ultrasonic Leak Detector Air Knives.............................. 2 Super Air Knife Air Knife
General Information. Lower Frequency Models Custom Designs Special Flanges Narrow Band Specials VSWR. Frequency ( GHz) COMMON SPECIFICATIONS
Waveguide Adapters General Information DC - 26.5 GHz High Performance 1.15 Typical VSWR Male or Female Connectors available Choke Flange Types available -65 o C to +125 o C Operating Temperature Midwest
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
BURSTCHECK LINE OF RUPTURE DISC BURST INDICATORS
BURSTCHECK LINE OF RUPTURE DISC BURST INDICATORS INTRODUCTION Rupture discs are often used as primary pressure relief devices and to isolate pressure relief valves. When used as a primary pressure relief
solenoid valves SV Series 2- and 3-way Solenoid Valves for Gas and Liquid
2- and 3-way Solenoid Valves for Gas and Liquid SV10: Vacuum to 3000 psig SV430: Vacuum to 3000 psig SV20: Vacuum to 6000 psig SV460: Vacuum to 6000 psig SV30: Vacuum to 3000 psig Circle Seal Controls
COMBIMASS. Technical Data COMBIMASS eco-bio +
COMBIMASS Technical Data THE SYSTEM COMBIMASS The field transmitters of the COMBIMASS eco series are suitable for gas flow measurement and cover a wide range of different applications. The instruments
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
TTC-IIS Series Up to 11 LPM Free Flow
66 Up to 11 LPM Free Flow Typical Applications Gas Analysis Anesthesia Monitors CO 2 Monitors Patient Monitoring Wound Therapy Urinalysis Trace Detection Medical/Training Mannequins Degassing Product Specifications
VM Series Manual Diaphragm Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 4" EPDM, Viton (FPM) or PTFE (EPDM backed)
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D3222 ASTM D2467 ASTM D2466 ASTM D1785 ASTM D1784 ASTM F441 ASTM F439 IPEX VM Series Diaphragm Valves are the ideal solution f modulating
Full Technical Catalog For Closed-loop Sampling System
Full Technical Catalog For Closed-loop Sampling System Full Technical Catalog For Closed-loop Sampling System FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
Residual Gas Analyzers
Residual Gas Analyzers RGA100/200/300 100 amu, 200 amu and 300 amu systems SRS Residual Gas Analyzers 100, 200 and 300 amu systems Better than 1 amu resolution 6 decades of dynamic range 5 10 14 Torr detection
Integrated Custom Systems
Integrated Custom Systems Compact panels Standard Manifolds & Assemblies Electronic pressure control Custom manifolds & Assemblies Automated test benches S t r e a m l i n e y o u r p r o c e s s Complete
Integral-Bonnet Needle Valves
www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) 2 Integral-Bonnet
Autoclave Engineers. Laboratory Stirred Reactors. Stirred Reactors
Autoclave Engineers Laboratory Stirred Reactors Stirred Reactors Stirred Reactors Autoclave Engineers has been associated with excellence in pressurized reaction equipment for over 50 years. Autoclave