Wind Rated / FloRida approved

Transcription

1 Wind Rated / FloRida approved tell doors & WindoWS Page

2 TIOGA DOORS TELL MFG offers a complete line of standard hollow metal doors to fit your needs. Doors are available in 20 and 18 gauge steel. All doors come with a polystyrene core as standard, making every door smoother, flatter, and stronger. All door panels are manufactured from high quality galvannealed steel and are thoroughly cleaned inside and out to insure excellent corrosion resistance and paint adhesion. Doors come standard with a prime coat white or bronze, ready to be finished. Factory applied finish coat paint is available in many colors. Contact customer service for pricing and quantities required, for factory finish paint. TELL MFG follows the same set of performance specifications as other door manufacturers, as set forth in the Steel Door Institute (SDI) requirements. Insulated with polystyrene core Non-handed Galvannealed (standard) Fire rated up to 3 hours 7 gauge hinge reinforcements Reinforced 161 lock prep Closer reinforcement (standard) Meets ANSI standards Universal 4 ½ hinge prep Inverted top and bottom channel Installed steel cap standard Available with polyurethane core tell doors & WindoWS Page

3 TIOGA OEM KNOCK DOWN FRAME TELL MFG offers in 16 gauge galvannealed steel. Frames are knock-down construction. FRAMES are available for 1 ¾ thick doors as standard. Precision bolted corners provide a smooth attractive design and allow easy installation. FRAMES come standard with a prime coat ready to be finished white or bronze. Factory applied finish coat paint is available in many colors. Contact customer service for pricing and quantities required, for factory finish paint. STANDARD FEATURES: 16 gauge for 1-3/4 doors Precision bolted corners Galvannealed (standard) 7 gauge hinge reinforcements METAL BUILDING FRAMES Single Swing Frames / Non-Handed Pedestrian Door Frame Head Pedestrian Door Frame Hinge Jamb Pedestrian Door Frame Strike Jamb Heavy duty strike reinforcements Meets ANSI standards Universal 4 ½ hinge prep Sill Section Head to Girt Clip and Screw Pack K.D. Frame Assembly Details STOCK PROFILE TYPICAL BASE AND WALL ANCHORS HINGE REINFORCEMENT KD Head Condition KD Jamb Profile KD Jamb Sill Condition STRIKE REINFORCEMENT tell doors & WindoWS Page

4 4-1/4 10-1/4 DEPTH KERFED 9î 33î 33î 9î tell doors & WindoWS Page

5 8-1/4 DEPTH KERFED tell doors & WindoWS Page

6 8-1/4 DEPTH KERFED 9î 33î 33î 9î tell doors & WindoWS Page

7 8-1/4 DEPTH KERFED tell doors & WindoWS Page

8 WIND RATED CERTIFICATION, FL APPROVAL # / WIND RATED ~ SINGLE FL # MODEL, NUMBER OR NAME DESCRIPTION TIOGA DOORWAY SYSTEM TIOGA DOORWAY SYSTEM TDS-S-PA-WS OS STEEL SINGLE DOOR Limits of Use: Installation Instructions: Approved for use in HVHZ: Yes FL13889 R0 II PDF Approved for use outside HVHZ: Yes Verified By: Luis Roberto Lomas Impact Resistant: Yes Created by Independent Third Party: Yes Design Pressure: +50/-50 Evaluation Reports: Other: PRODUCT WAS NOT TESTED FOR WATER FL13889 R0 AE PDF PENETRATION AND IS TO BE INSTALLED IN AREAS FL13889 R0 AE FOAM CERTIFICATE.PDF WHERE WATER RESISTANCE IS NOT REQUIRED Created by Independent Third Party: Yes TIOGA DOORWAY SYSTEMS - SINGLE- WINDSTORM ASSEMBLIES (TDS-S-WS) THE FOLLOWING DOOR, FRAME AND HARDWARE SYSTEMS ARE DESIGNED TO MEET THE REQUIREMENTS OF: TAS 201, IMPACT TEST PROCEDURES TAS 202, CRITERIA FOR TESTING IMPACT & NON-IMPACT RESISTANT BUILDING ENVELOPE COMPONENTS USING UNIFORM STATIC AIR PRESSURE TAS 203, CRITERIA FOR TESTING PRODUCTS SUBJECT TO CYCLIC WIND PRESSURE LOADING LIMITS OF USE APPROVED FOR USE IN HVHZ: YES APPROVED FOR USE OUTSIDE HVHZ: YES IMPACT RESISTANT: YES DESIGN PRESSURE: +50/-50 PSF OTHER: NONE SAMPLE: 0A (TDS-S-KD-A-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY KNOCK-DOWN (KD) SYSTEM HARDWARE SET A 1 CYLINDRICAL LOCK LC1200 SERIES, TELL MFG., INC. 3 HINGES, H4545BBNRP, TELL MFG., INC. 1 THRESHOLD, 1/2" HIGH ALUMINUM 1 SET KERF WEATHERSTRIPPING 1 DOOR SWEEP, DT100101, TELL MFG., INC. SAMPLE: 0B (TDS-S-KD-B-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY KNOCK-DOWN (KD) SYSTEM HARDWARE SET B 1 MORTISE LOCK, ML1300 SERIES. TELL MFG., INC. 3 HINGES, H4545BBNRP, TELL MFG., INC. 1 THRESHOLD, 1/2" HIGH ALUMINUM 1 SET KERF WEATHERSTRIPPING 1 DOOR SWEEP, DT100101, TELL MFG., INC. SAMPLE: 0C (TDS-S-KD-C-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY KNOCK-DOWN (KD) SYSTEM HARDWARE SET C 1 RIM PANIC DEVICE, 9500 SERIES, TELL MFG., INC. 3 HINGES, H4545BBNRP, TELL MFG., INC. 1 THRESHOLD, 1/2" HIGH ALUMINUM 1 SET KERF WEATHERSTRIPPING 1 DOOR SWEEP, DT100101, TELL MFG., INC. SAMPLE: 10A (TDS-S-PA-A-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY PRE-ASSEMBLED (PA) SYSTEM HARDWARE SET A SAME AS 0A SAMPLE: 10B (TDS-S-PA-B-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY PRE-ASSEMBLED (PA) SYSTEM HARDWARE SET B SAME AS 0B SAMPLE: 10C (TDS-S-PA-C-WS) TIOGA DOORWAY SYSTEM - SINGLE - WINDSTORM ASSEMBLY PRE-ASSEMBLED (PA) SYSTEM HARDWARE SET C SAME AS 0C tell doors & WindoWS Page

9 WIND RATED CERTIFICATION, FL APPROVAL # / WIND RATED ~ DOUBLE FL # MODEL, NUMBER OR NAME DESCRIPTION TIOGA DOORWAY SYSTEM TIOGA DOORWAY SYSTEM TDS-D-PA-WS OS STEEL DOUBLE DOOR Limits of Use: Installation Instructions: Approved for use in HVHZ: Yes FL13889 R0 II PDF Approved for use outside HVHZ: Yes Verified By: Luis Roberto Lomas Impact Resistant: Yes Created by Independent Third Party: Yes Design Pressure: +50/-50 Evaluation Reports: Other: PRODUCT WAS NOT TESTED FOR WATER FL13889 R0 AE PDF PENETRATION AND IS TO BE INSTALLED IN AREAS FL13889 R0 AE FOAM CERTIFICATE.PDF WHERE WATER RESISTANCE IS NOT REQUIRED Created by Independent Third Party: Yes TIOGA DOORWAY SYSTEMS - DOUBLE- WINDSTORM ASSEMBLIES (TDS-D-WS) THE FOLLOWING DOOR, FRAME AND HARDWARE SYSTEMS ARE DESIGNED TO MEET THE REQUIREMENTS OF: TAS 201, IMPACT TEST PROCEDURES TAS 202, CRITERIA FOR TESTING IMPACT & NON-IMPACT RESISTANT BUILDING ENVELOPE COMPONENTSUSING UNIFORM STATIC AIR PRESSURE TAS 203, CRITERIA FOR TESTING PRODUCTS SUBJECT TO CYCLIC WIND PRESSURE LOADING LIMITS OF USE APPROVED FOR USE IN HVHZ: YES APPROVED FOR USE OUTSIDE HVHZ: YES IMPACT RESISTANT: YES DESIGN PRESSURE: +50/-50 PSF OTHER: NONE SAMPLE: 20 (TDS-D-KD-D-WS) TIOGA DOORWAY SYSTEM - DOUBLE - WINDSTORM ASSEMBLY KNOCK-DOWN (KD) FRAME HARDWARE SET D 1 MORTISE LOCK, ML1300 SERIES. TELL MFG., INC. 6 HINGES, H4545BBNRP, TELL MFG., INC. 1 THRESHOLD, 1/2" HIGH ALUMINUM 1 SET KERF WEATHERSTRIPPING 2 SURFACE BOLTS, 988Y, YALE SECURITY, INC. 2 DOOR SWEEP, DT100101, TELL MFG., INC. 1 TWO PIECE STEEL ASTRAGAL / EDGE CHANNEL SAMPLE: 30 (TDS-D-PA-D-WS) TIOGA DOORWAY SYSTEM - DOUBLE - WINDSTORM ASSEMBLY PRE-ASSEMBLED (PA) UNIT HARDWARE SET D HARDWARE SAME AS 20 tell doors & WindoWS Page

10 tell doors & WindoWS Page

11 WINDOW SPECIFICATIONS tell doors & WindoWS Page

12 WINDOW SPECIFICATIONS tell doors & WindoWS Page

13 R-U VALUE INSULATION SPECS FOR TIOGA KNOCK DOWN DOOR SYSTEM, PAGE 1 OF 2 tell doors & WindoWS Page

14 R-U VALUE INSULATION SPECS FOR TIOGA KNOCK DOWN DOOR SYSTEM, PAGE 2 OF 2 tell doors & WindoWS Page

15 TIOGA KNOCK DOWN DOOR AND FRAME HOW TO ORDER CHART HARDWARE OPTIONS (LOCKS ARE PACKED IN THE FRAME CARTON AS STANDARD. IF PREFERRED TO SHIP SEPARATELY, PLEASE LIST - SEE SPECIAL CONDITIONS) GRADE 2 DEADBOLT LATCH GUARD HEAVY DUTY CLOSER DOOR TRIM SET (STANDARD) GRADE 1 CLOSER (STANDARD) PANIC EXIT LEVER KERF WEATHERSTRIP SWEEP ADA THRESHOLD BALL BEARING, NON-REMOVEABLE PIN HINGE KERF SWEEP THRESH BBNRP MORTISE LEVER KEYED DIFFERENT (STANDARD) KEYED ALIKE (OPTIONAL) GRADE 1 LEVER KEYED DIFFERENT (STANDARD) KEYED ALIKE (OPTIONAL) GRADE 2 KNOB KEYED DIFFERENT (STANDARD) KEYED ALIKE (OPTIONAL) DB LATCH CLOSER CLOSER PANIC ML1300 LC1200 ** FRAME / JAMB DEPTH GIRT ATTACHMENTS (OPTIONAL) GIRT 5-3/4 DEPTH (OPTIONAL) SIZE * 12-1/4 DEPTH (OPTIONAL) 60 = 6 FEET, 0 INCHES WIDE 70 = 7 FEET, 0 INCHES TALL 6070 PAINT OPTIONS 10-1/4 DEPTH (OPTIONAL) DOOR & FRAME SERIES 6-1/4 DEPTH (OPTIONAL) 40 = 4 FEET, 0 INCHES WIDE 70 = 7 FEET, 0 INCHES TALL 4070 TIOGA BRONZE CYLINDRICAL GRADE 2 LEVER (STANDARD) KEYED DIFFERENT (STANDARD) KEYED ALIKE (OPTIONAL) KC2300 LC2681 TIOGA KNOCK DOWN FRAME TIOGA WHITE BZ WH 4-1/4 DEPTH (OPTIONAL) 8-1/4 DEPTH (STANDARD SIZE) = 3 FEET, 0 INCHES WIDE 70 = 7 FEET, 0 INCHES TALL 3070 TIOGA KNOCK DOWN DOOR TKDF TKDD WH GIRT BBNRP 24X30 TEMP R LC2681 OEM TKDD GIRT ATTACHMENTS 24 INCHES X 30 INCHES TEMPERED GLASS 24X30 TEMP REVERSIBLE HANDING R OEM METAL BUILDING tell doors & WindoWS Page SPECIAL KEYING SITUATIONS GIRT KEYING 20 GAUGE SKIN (STANDARD) OEM 24 INCHES X 30 INCHES INSULATED GLASS DO NOT PACK LOCKS IN FRAME PACKAGES, SHIP SEPARATELY ALL DOORS ARE TEXTURED SKIN AS STANDARD. LIST IF SMOOTH SKIN IS NEEDED. LOCKS SKIN DOOR SWING HANDING 6 INCHES X 30 INCHES TEMPERED GLASS 6 INCHES X 30 INCHES INSULATED GLASS 24X30 INS 6X30 TEMP 6X30 INS 18 GAUGE SKIN (OPTIONAL) DOOR TYPE (IF ORDERING DEAD BOLT OR GLASS PREPS, SEE HANDING OPTIONS CHART *** ) GAUGE * WINDOW KIT OPTIONS SPECIAL CONDITIONS PLEASE INDICATE ON ORDER / EXAMPLES LISTED HANDING CHART DOOR SWING OPTIONS: SPECIFY USING LETTERS SHOWN BELOW *** ** FRAME / JAMB DEPTH 8-1/4 D C B A * SIZE AND GAUGE NOTES: TEXTURED DOORS AVAILABLE ONLY IN 20 GAUGE AND 3070 AND 6070 SIZES. NOT AVAILABLE IN FIRE-RATED. SMOOTH DOORS ARE AVAILABLE UPON REQUEST. NOT AVAILABLE IN FIRE-RATED. DI BI CI OUTSIDE OF BUILDING AI