Dali Dimmable LED Driver (Constant Current & Constant Voltage)

Transcription

1 Dimming (Dali) Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DCJolly Dali is a revolutionary multi voltage power supply which allows LEDs to be dimmed from any Dali dimming system. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads): 350mA (15W), 500mA (W 1V}), 700mA (5W 1V}), 10V (9W), 1V (10W), and 4V (W 1V}). C Multi Voltage zip 3W DCJOLLY 9W-3W Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DC Maxi Jolly Dali is a power supply for LEDs which can power both voltage LED strips (48 V) and power current powered LEDs (350 ma, 500 ma, 700 ma, 900 ma, 1050 ma).

2 The function mode is selected by means of the DIP SWITCH, which is below the terminal cover. C Multi Voltage zip 50W DCJOLLY MAX 50W 6311 DCC Dali Interface (Constant Current & Constant Voltage) 1V The DCC Dali Interface is an interface converting signals into PWM Signals. This converter can be poweredeither by mains ( VAC) or by a 1 Vdc voltage. Please note: Technical information is available on this product, see technical tab above. C 1V zip W DCC W Optotronic Oti Dali Dimmable Driver (Constant Voltage) 40V/4V The Optotronic Oti Dali is a line voltage converter and PWM dimmer intergrated in a single unit. Product Benefits Flexible addressing via Areas of application For luminaires of protection classes I and II Suitable for separate mounting Suitable for indoor applications Product Features 4 channel converter Dimming range: % luminous flux Suitable for 4 V LED modules One input for up to four addressable output channels 75 W output can be freely distributed among up to 4x4 V PWM output channels C 40V/4V zip

3 DC OTI 75/ Optotronic Oti Dali Dimmable Driver (Constant Voltage) The Optotronic Oti Dali Dim is a intelligent electronic constant-voltage 1-channel dimmer. Integrated TouchDIM functionality enables dimming/switching via standard switches. Please note: A power supply is required for this product. When using a 1V power supply the maximum load is 50W. When using a 4V power supply the maximum load is 1W. Product features Maximum output current: 5A Cable clamp housing for independent mounting Dimming range: % Reversible protection mechanisms for short-circuits, overtemperature and -loads 10V Maximum 50W 4V Maximum 1W Dimmable C 10V/4V zip 50-1W DC OTI V (50W) / 4V (1W) Dali-CV LED Interface Dimmable Driver (Constant Voltage) The Dali-CV LED Interface is a intelligent electronic constant-voltage 1-channel dimmer. Please note: A power supply is required for this product. When using a 1V power supply the maximum load is 100W. When using a 4V power supply the maximum load is 0W. Product features Maximum output current: 8A Cable clamp housing for independent mounting Operating Temperature: 50Â C Case Temperature: 80Â C 10V Maximum 100W 4V Maximum 0W Dimmable

4 C 10V/4V 100-0W 701-8A 10V (100W) / 4V (0W) Dali Dimmable LED Driver (Constant Current & Constant Voltage) The DCJolly Dali is a revolutionary multi voltage power supply which allows LEDs to be dimmed from any Dali dimming system. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads): 50mA (10W) 350mA (15W) 400mA (17W) 450mA (19W) 500mA (W) 550mA (W) 600mA (W) 700mA (W) 4V (16W) C Multi Voltage zip 3W DCJOLLY MIN 10W-W Dimmable LED Driver - DCC Dali Interface 1V The DCJolly MD Driver and DCC Dali Interface DCJolly MD is a revolutionary multi voltage power supply which allows LEDs to be dimmed from a regular dimmer. The DCJolly is powered by a 40V input, which means that only wires are required in order to be able to dim the LED circuit. A series of dipswitches gives the user the option to flick the output to any of the following voltages (and maximum loads):350ma (17W), 500mA (4W), 550mA (5W), 700mA (3W), 750mA (3W), 1V (10W), 4V (W), and 8V (W). The DCJolly does not have a minimum load to adhere to but you would still have to follow the minimum loads of the dimmer module you are using. This would usually be 5W - 60W, depending on the dimmer being used. The DCC Dali Interface is an interface converting signals into PWM Signals. This converter can be powered either by

5 mains ( VAC) or by a 1 Vdc voltage. C 1V zip W DCJOLLY+DCC Optotronic Oti Dali Dimmable Driver (Constant Voltage) 40V/4V converter CON 1-10V LI is a multifunctional unit. On the one hand it is a converter which is accessed digitally via the interface in the same way as a ECG, and on theother hand it is a lighting controller in its own right. With its control output (combinedinterface 1-10V/0-10V) and load contact, ECG and electronic transformers can be dimmed and switched via 1-10V and dimmers via 0-10V. Load capacity of the signal output: max. 100 ma V max. 5 ma active Switchable characteristic: linear/logarithmic Load capacity of switching contact: 5 A Touch DIM control of V ECGs C 40V/4V zip DC OTI 75/ Oti Dali Dimmable Driver (Constant Current) 40V The reliable choice for the energy saving lighting: dimmable, embedded corridor functionality and advanced Touch Dim with daylight harvesting, constant lumen output. Digitally programmable. Automatic current set through the LEDSet interface. Features Wide operating range: 180mA ma Suitable for emergency lighting units. Smart dimming down to 1% Fully digitally programmable Overload protection C 40V/4V zip

6 DC OTI 5 5W