A u t o C A D U S E R I N T E R F A C E. This power-point is intended for AR-119 & EG-110 GRCC students to reference from.
|
|
- Caitlin Walton
- 7 years ago
- Views:
Transcription
1 A u t o C A D U S E R I N T E R F A C E 1
2 U S E R I N T E R F A C E Ribbon 2
3 S T A R T I N G A N E W D R A W I N G Application Menu: Quick AccessToolbar: Menu Bar: New > Drawing NEW or QNEW New New > Drawing 3
4 S A V I N G Y O U R W O R K Application Menu: Quick AccessToolbar: Menu Bar: SAVEAS, SAVE QSAVE, SAVEAS, SAVE Save or Save As File > Save or Save As 4
5 D R A W I N G S L I N E S I N A u t o C A D Ribbon: Home > Draw > Line Toolbar: Draw > Line Menu Bar: Draw > Line Tool Palettes: Draw > Line LINE or L The Line tool in the Draw panel Drawing lines using the LINE command The LINE command from the Draw toolbar 5
6 E R A S I N G O B J E C T S Ribbon: Home > Modify > Erase Toolbar: Modify > Erase Menu Bar: Modify > Erase ERASE or E Tool Palettes: Modify > Erase The Erase tool in the Modify toolbar Selecting the object by positioning the pick box at the top of the object The Erase tool in the Modify Panel 6
7 D R A W I N G A C I R C L E CIRCLE or C Toolbar: Draw > Circle Menu Bar: Draw > Circle Tool Palettes: Draw > Circle Ribbon: Home > Draw > Circle drop-down > Center, Radius The options of the CIRCLE command Center and Radius Two-Point Tangent, Tangent, Radius Tangent Center and Diameter Three-Point Tangent, Tangent, Tools in the Circle drop-down 7
8 D R A W I N G A C I R C L E Notice how the cursor attaches itself to the outside of the circle when using a radius. Drawing a circle by specifying the center and the radius Drawing a circle by specifying the center and the diameter A circle drawn by using the 2-Point option A circle drawn by using the 3-point option 8
9 S E T T I N G U N I T T Y P E S A N D P R E C I S I O N Application Menu: Drawing utilities > Units UNITS The Drawing Units dialog box 9
10 I N T R O D U C T I O N T O P L O T T I N G D R A W I N G S Ribbon: Output > Plot > Plot Toolbar: Quick Access > Plot Application Menu: Print > Plot PLOT or PRINT (The Plot dialog box) 10
11 M O D I F Y I N G A u t o C A D S E T T I N G S U S I N G T H E O P T I O N S D I A L O G B O X Application Menu: Options OPTIONS The Options dialog box 11
12 D R A W I N G E L L I P S E S Ribbon: Toolbar: Tool Palettes: Home > Draw >Ellipse drop-down Draw >Ellipse Draw > Ellipse ELLIPSE Drawing an Ellipse Using the Axis and Endpoint Option Tools in the ELLIPSE drop-down in the Draw panel 12
13 Drawing Elliptical Arcs D R A W I N G E L L I P S E S Ribbon: Home > Draw > Ellipse drop-down > Elliptical Arc Toolbar: Draw > Ellipse Arc Tool Palettes: Draw > Ellipse Arc ELLIPSE > Arc 13
14 D R A W I N G A P O L Y G O N B Y S P E C I F Y I N G T H E C E N T E R O F T H E P O L Y G O N Inscribed Octagon Drawing an inscribed polygon using the Center of Polygon option Circumscribed Pentagon Drawing a circumscribed polygon using the Center of Polygon option 14
15 W O R K I N G W I T H L A Y E R S Ribbon: Toolbar: Layers > Layer Properties LAYER or LA Layers > Layer Properties Manager Layer Properties Manager 15
16 Creating New Layers W O R K I N G W I T H L A Y E R S Partial view of the Layer Properties Manager with the new layer created 16
17 R U N N I N G O B J E C T S N A P M O D E Toolbar: Object Snap > Osnap Settings OSNAP The Drafting Settings dialog box (Object Snap tab) 17
18 F I L L E T I N G T H E S K E T C H E S Ribbon: Toolbar: Home > Modify > Fillet/Chamfer drop-down Modify > Fillet FILLET Fillet/Chamfer drop-down Before After Before After Filleting the parallel and non parallel lines Using the FILLET command on circles and arcs 18
19 A R R A Y I N G T H E S K E T C H E D O B J E C T S Ribbon: Home > Modify > Array Toolbar: Modify > Array ARRAY RECTANGULAR ARRAY 19
20 A R R A Y I N G T H E S K E T C H E D O B J E C T S Ribbon: Home > Modify > Array Toolbar: Modify > Array ARRAY ROLAR ARRAY 20
21 M I R R O R I N G S K E T C H E D O B J E C T S Ribbon: Home > Modify > Mirror Toolbar: Modify > Mirror MIRROR Creating a mirror image of an object using the MIRROR command Mirroring the object at an angle 21
22 E D I T I N G S K E T C H E S & M O V I N G S K E T C H E D O B J E C T S Ribbon: Home > Modify > Move Toolbar: Modify > Move MOVE The MOVE command from the Modify panel Moving objects to a new location 22
23 Using the COPY command C O P Y I N G T H E S K E T C H E D O B J E C T S Ribbon: Home > Modify > Copy Toolbar: Modify > Copy COPY The COPY command from the Modify panel Creating Multiple Copies 23
24 C O P Y I N G O B J E C T S U S I N G T H E B A S E P O I N T COPYBASE The COPYBASE command from the shortcut menu 24
25 P A S T I N G C O N T E N T S PASTING CONTENTS FROM THE CLIPBOARD Ribbon: Clipboard > Paste > Paste as Block PASTEBLOCK PASTING CONTENTS USING ORIGINAL COORDINATES Ribbon: Clipboard > Paste > Paste to Original Coordinates PASTEORIG 25
26 T R I M M I N G T H E S K E T C H E D O B J E C T S Ribbon: Home > Modify > Trim Toolbar: Modify > Trim TRIM Tools in the Trim/Extend dropdown menu Using the TRIM command 26
27 T R I M M I N G T H E S K E T C H E D O B J E C T S Ribbon: Home > Draw > Points drop-down > Measure MEASURE The MEASURE tool from the Points drop-down menu Measuring a line and a circle 27
28 I N T R O D U C T I O N T O G R I P S & T Y P E S O F G R I P S Line Circle Arc Block ADJUSTING GRIP SETTINGS Application Menu: Options OPTIONS Polygon Polyline Spline Dimension Grips displayed on various objects The Selection tab of the Options dialog box 28
29 M A N A G I N G C O N T E N T S U S I N G T H E D E S I G N C E N T E R Ribbon: View > Palettes > DesignCenter ADCENTER Menu Bar: Tools > Palettes > DesignCenter The DesignCenter window 29
30 M A N A G I N G I N Q U I R I E S A B O U T O J B E C T S & D R A W I N G S Measuring Area of Objects Ribbon: Menu Bar: Home > Utilities >Measure drop-down > Area AREA Tools > Inquiry > Area Tools in the Measure drop-down 30
31 Z O O M I N G D R A W I N G S Ribbon: Menu Bar: Toolbar: View > Navigate > Extents ZOOM View > Zoom Navigation Bar > Zoom Extents Invoking the ZOOM option in the shortcut menu The Zoom tools in the Navigation Bar The Zoom fly-out 31
32 P A N N I N G D R A W I N G S Ribbon: Menu Bar: Navigation Toolbar: View > Navigate > Pan PAN View > Pan > Pan Realtime Pan The PAN command options from the View menu 32
33 C R E A T I N G S I N G L E L I N E T E X T Writing Single Line Text Ribbon: Menu Bar: Toolbar: Home > Annotation > Text drop-down > Single Line Or Annotate > Text drop-down > Multiline text > Single Line TEXT or DTEXT Draw > Text > Single Line Text Text > Single Line Text Choosing the Single Text command from the Home tab 33
34 C R E A T I N G M U L T I L I N E T E X T Writing Multiline Line Text Ribbon: Home > Annotate > Text drop-down > Multiline Text Tool Palette: Draw > Mtext Or Annotate > Text > Multiline Text MTEXT Menu Bar: Draw > Text > Multiline Text Toolbar: Draw, Text > Multiline Text Choosing the Multiline Text command from the Home tab 34
35 T E X T E D I T I N G The Text Editor tab and the text window The Font drop-down list 35
36 T E X T E D I T I N G Editing Text Using the DDEDIT Command Menu Bar: Modify > Object > Text > Edit Toolbar: Text > Edit DDEDIT Editing Text Using the Properties Palette Modifying the Scale of the Text Ribbon: Annotate > Text > Scale Menu Bar: Modify > Object > Text > Scale Toolbar: Text > Scale SCALETEXT Modifying the Justification of the Text Ribbon: Annotate > Text > Justify Toolbar: Text > Justify Menu bar: Modify > Object > Text > Justify JUSTIFYTEXT The Properties palette 36
37 I N S E R T I N G A T A B L E I N T H E D R A W I N G Ribbon: Tool Palette: Menu Bar: Toolbar: Home > Annotation > Table Or Annotate > Tables > Table Draw > Table Draw > Table Draw > Table JUSTIFYTEXT The Tables panel in the Annotate tab of the Ribbon 37
38 I N S E R T I N G A T A B L E I N T H E D R A W I N G The Insert Table dialog box 38
39 D I M E N S I O N I N G I N A u t o C A D The Dimensions panel The Dimension toolbar 39
40 D I M E N S I O N I N G I N A u t o C A D Using alternate units for dimensioning Leader used to attach annotation Notice how the center mark is smaller than the centerline. Center mark Centerline 40
41 C R E A T I N G L I N E A R D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Dimension drop-down > Linear DIMLIN or DIMLINEAR Dimension > Linear Dimension > Linear Horizontal Vertical Drawing linear dimensions 41
42 C R E A T I N G A L I G N E D D I M E N S I O N S Ribbon: Menu bar: Toolbar: Annotate > Dimensions > Dimension drop-down > Aligned DIMALIGNED Dimensions > Aligned Dimension > Aligned Aligned dimensioning 42
43 C R E A T I N G A R C L E N G T H D I M E N S I O N S Ribbon: Annotate > Dimensions > Dimension drop-down > Linear > Arc Length DIMARC Menu Bar: Dimension > Arc Length Toolbar: Dimension > Arc Arc Length dimensioning Partial Arc Length dimensioning 43
44 C R E A T I N G B A S E L I N E D I M E N S I O N S Ribbon: Toolbar: Menu Bar: Annotate > Dimensions > Continue drop-down > Baseline Dimension > Baseline Dimension > Baseline DIMBASE or DIMBASELINE Baseline dimensioning 44
45 C R E A T I N G C O N T I N U E D D I M E N S I O N S Ribbon: Toolbar: Menu Bar: Annotate > Dimensions > Continue drop-down > Continue Dimension > Continue Dimension > Continue DIMCONT or DIMCONTINUE Continue dimensioning 45
46 C R E A T I N G D I A M E T E R D I M E N S I O N S Ribbon: Toolbar: Menu Bar: Annotate > Dimensions > Dimension drop-down > Diameter DIMDIA Dimension > Diameter Dimension > Diameter Diameter dimensioning 46
47 C R E A T I N G R A D I U S D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Dimension drop-down > Radius DIMRAD Dimension > Radius Dimension > Radius Radius dimensioning 47
48 C R E A T I N G J O G G E D D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Dimension drop-down > Jogged DIMJOGGED Dimension > Jogged Dimension > Jogged Jogged dimensioning 48
49 C R E A T I N G J O G G E D L I N E A R D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Dimension, Dimjogline DIMJOGLINE Dimension > Jogged Linear Dimension > Jogged Linear Jogged linear dimensioning 49
50 C R E A T I N G O R D I N A T E D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Dimension drop-down > Ordinate DIMORD Dimension > Ordinate Dimension > Ordinate Ordinate dimensioning 50
51 M A I N T A I N I N G E Q U A L S P A C I N G B E T W E E N D I M E N S I O N S Ribbon: Menu Bar: Toolbar: Annotate > Dimensions > Adjust Space Dimension > Dimension Space Dimension > Dimension Space DIMSPACE Drawing with linear dimensions unequally spaced Drawing after its linear dimensions equally spaced 51
52 D R A W I N G M U L T I L E A D E R S Ribbon: Toolbar: Annotate > Leaders > Multileader MLEADER Multileader > Multileader Image displaying the options to locate the leader start point 52
53 M O D E L S P A C E A N D P A P E R S P A C E / L A Y O U T S Ribbon: View > Viewports > New Menu Bar: View > Viewports > New Viewports Toolbar: Viewports > Display Viewports Dialog or Layouts > Display Viewports Dialog VPORTS Screen display with multiple tiled viewports 53
54 H A T C H I N G D R A W I N G S U S I N G T H E H A T C H T O O L The Hatch Creation tab Ribbon: Toolbar: Draw > Hatch Draw > Hatch HATCH or H U S I N G T H E H A T C H E D I T C O M M A N D The Hatch Editor tab with the options for the Gradient pattern Ribbon: Tool Palette: Toolbar: Home > Modify > Edit Hatch Modify > Edit Hatch Modify II > Edit Hatch HATCHEDIT 54
55 U N D E R S T A N D I N G X, Y, & Z A X E S X, Y, and Z axes Viewing directions for Front, Side, and Top views Representing views on paper 55
56 Source: dex.html?url=ws1a f5ff15d97a810d5ab4f18b- 7ed0.htm,topicNumber=d0e
AutoCAD 2009. New Icon Quick Reference
AutoCAD 2009 New Quick Reference Contents Chapter 1 New Quick Reference..................... 1 Toolbars................................... 1 3D Navigation Toolbar........................ 1 CAD Standards
More informationComputer-Aided Drafting I
Course Syllabus Computer-Aided Drafting I Course Description This course introduces computer-aided drafting (CAD) and examines the hardware that makes up a CAD workstation. It also covers the operating
More informationTo draw a line. To create a construction line by specifying two points
Drawing Lines, Polygons and Rectangles The line is the basic object in AutoCAD. You can create a variety of lines: single lines, multiple line segments with and without arcs, multiple parallel lines, and
More informationChapter 1. Creating Sketches in. the Sketch Mode-I. Evaluation chapter. Logon to www.cadcim.com for more details. Learning Objectives
Chapter 1 Creating Sketches in Learning Objectives the Sketch Mode-I After completing this chapter you will be able to: Use various tools to create a geometry. Dimension a sketch. Apply constraints to
More informationAn introduction to 2D AutoCAD
An introduction to 2D AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA Contents: 1 Introduction.... 3 1.1 What is AutoCAD?... 3 1.2 The interface.... 3 1.3 Saving your
More informationChapter 23: Drafting in Worksheet View
Chapter 23: Drafting in Worksheet View Worksheet View is a powerful, 2D production drafting module. Here you can find all of the drawing and editing tools needed to create fast, accurate, detailed working
More informationPro/ENGINEER Wildfire 4.0 Basic Design
Introduction Datum features are non-solid features used during the construction of other features. The most common datum features include planes, axes, coordinate systems, and curves. Datum features do
More informationTo develop an understanding of the basic principles of drawing using AutoCAD. 3) Deduce the intersection lines for intersected cylinders.
PROGRAMME: COURSE NAME: NATIONAL DIPLOMA IN INTERIOR DESIGN COMPUTER AIDED DESIGN (2D) COURSE CODE: ARC 213 DURATION: 0 4 4 UNITS: GOAL: GENERAL OBJECTIVES: 4 UNIT To develop an understanding of the basic
More informationZWCAD Professional vs. Standard vs. Academic
ZWCAD Professional vs. Standard vs. Academic Feature supported Feature not supported Compatibility with AutoCAD DWG & DXF File Format Support AutoCAD Command AutoCAD Menu(.mnu)& Alias Support TTF & SHX
More informationWORKING DRAWINGS Shaft Support Subassembly
Start Autocad and open a NEW drawing WORKING DRAWINGS Shaft Support Subassembly Set up the layers and line types using the LAYER command Draw the following parts and save them each in a separate file BEARING
More informationIsometric Circles and Arcs
Isometric Circles and Arcs Circles appear as ellipses, and arcs as elliptical arcs on an isometric drawing. You must properly align isometric circles and arcs with the appropriate isometric plane. See
More informationSAVEAS Saves the current drawing using a new file name, opens the newly named file and closes the drawing with the old name.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: jennifer@thatcadgirl.com Phone: (919) 417-8351 Fax: (919) 573-0351 Introduction to Autocad and IntelliCAD Command List This document
More informationTABLE OF CONTENTS. INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE...
Starting Guide TABLE OF CONTENTS INTRODUCTION... 5 Advance Concrete... 5 Where to find information?... 6 INSTALLATION... 7 STARTING ADVANCE CONCRETE... 7 ADVANCE CONCRETE USER INTERFACE... 7 Other important
More informationFirst Level: 2D Fundamentals. by Randy H. Shih Oregon Institute of Technology
AutoCAD 2008 Tutorial First Level: 2D Fundamentals by Randy H. Shih Oregon Institute of Technology MultiMedia CD by Jack Zecher Indiana University Purdue University Indianapolis SDC PUBLICATIONS Schroff
More informationWhat We Should Really Be Teaching in the AutoCAD Classroom, Part I
What We Should Really Be Teaching in the AutoCAD Classroom, Part I J.C. Malitzke Moraine Valley Community College ED305-1 This class will present the challenges instructors face with the 2D commands and
More informationIntroduction to AutoCAD lar 543 spring 2008
Introduction to AutoCAD lar 543 spring 2008 for landscape architects Makie Suzuki, Chihiro Shinohara in this session we cover: - introduction - basic operation - basic drawing tools - basic editing In
More informationEdinburgh COLLEGE of ART ARCHITECTURE 3D Modelling in AutoCAD - tutorial exercise The screen The graphics area This is the part of the screen in which the drawing will be created. The command prompt area
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 16 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationCATIA Drafting TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Drafting...2 Drawing Screen...3 Pull-down Menus...4 File...4 Edit...5 View...6 Insert...7 Tools...8 Drafting Workbench...9 Views and Sheets...9 Dimensions and Annotations...10
More informationIDP 150: INTRODUCTION TO AUTOCAD JANUARY TERM 2014 INSTRUCTOR: Keith A. Zaltzberg kzaltzberg@gmail.com 413-325-7968
IDP 150: INTRODUCTION TO AUTOCAD JANUARY TERM 2014 INSTRUCTOR: Keith A. Zaltzberg kzaltzberg@gmail.com 413-325-7968 OVERVIEW: Computer Aided Design (CAD ) programs offer engineers, architects, landscape
More informationSpaceClaim Introduction Training Session. A SpaceClaim Support Document
SpaceClaim Introduction Training Session A SpaceClaim Support Document In this class we will walk through the basic tools used to create and modify models in SpaceClaim. Introduction We will focus on:
More informationSolidWorks Implementation Guides. Sketching Concepts
SolidWorks Implementation Guides Sketching Concepts Sketching in SolidWorks is the basis for creating features. Features are the basis for creating parts, which can be put together into assemblies. Sketch
More informationSDC. Schroff Development Corporation WWW.SDCACAD.COM PUBLICATIONS. MultiMedia CD by Jack Zecher
MultiMedia CD by Jack Zecher An audioi/visual presentation of the tutorial exercises SDC PUBLICATIONS Schroff Development Corporation WWW.SDCACAD.COM AutoCAD 2002 Tutorial 2-1 Lesson 2 Geometric Construction
More informationBasic AutoSketch Manual
Basic AutoSketch Manual Instruction for students Skf-Manual.doc of 3 Contents BASIC AUTOSKETCH MANUAL... INSTRUCTION FOR STUDENTS... BASIC AUTOSKETCH INSTRUCTION... 3 SCREEN LAYOUT... 3 MENU BAR... 3 FILE
More informationWelcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional.
Workspace tour Welcome to CorelDRAW, a comprehensive vector-based drawing and graphic-design program for the graphics professional. In this tutorial, you will become familiar with the terminology and workspace
More informationK e y b o a r d s h o rt c ut s
Keyboard shortcuts Mouse navigation Middle button (wheel) Click + drag = pan Double-click = re-center view Left button Click = tool operation Click + spacebar = pan Shift + click + drag = multi-select
More informationThe CAD interface is comprised of two different screens: the graphic/drawing screen and the text screen.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: jennifer@thatcadgirl.com Phone: (919) 417-8351 Fax: (919) 573-0351 Overview of AutoCAD or IntelliCAD with Carlson Software Screens and
More informationPart Number: PMT1080-ENG Rev. 1
2010 Dassault Systèmes, All Rights Reserved DraftSight and the DraftSight logos are trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other brand or product names are
More informationTutorial - First Level: 2D Fundamentals
AutoCAD 2013 Prepares you for the Autodesk Certified Associate Exam Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia DVD SDC PUBLICATIONS Schroff Development Corporation Better Textbooks.
More informationDone. Click Done to close the Capture Preview window.
The Capture Preview window allows you to preview, edit, and customize a screen capture before it is saved to a file, inserted into your document, attached to an e-mail, or sent to a variety of other Output
More informationSE OF THE PROGRAM...5
MyHatch User guide PREFACE... 2 GOAL OF THE SOFTWARE... 2 DEFINITION OF HATCHES IN AUTOCAD... 2 MYHATCH PROGRAM... 2 DEFINITION OF HATCH PATTERNS... 3 USE OF THE PROGRAM... 5 INSTALLATION... 5 TOOLBAR
More informationOBJECTIVES. Computeraided. Drafting and Design. Drafting vocabulary
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. 50 Exploring Drafting Chapter 7 Computer-Aided Drafting and Design 5 7 Computer-Aided Drafting
More informationLayouts, Plotting, Printing
Layouts, Plotting, Printing Sacramento City College Engineering Design Technology Layouts, Plotting, Printing 1 Objectives Print and plot a drawing. Set up layouts using title blocks and viewports. Create
More informationIntroduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
More informationBLOCKS and AutoCAD DesignCenter
BLOCKS and AutoCAD DesignCenter Chapter Objectives After completing this chapter you should: 1. understand the concept of creating and inserting symbols in AutoCAD drawings; 2. be able to use the Block
More informationLesson Four 3D Modeling
Lesson Four 3D Modeling In this lesson you will learn how to: Easily Rotate the UCS to model in different planes Model lines in a method similar to drawing isometrics Create 3D Router Lines Automatically
More informationUnderstand the Sketcher workbench of CATIA V5.
Chapter 1 Drawing Sketches in Learning Objectives the Sketcher Workbench-I After completing this chapter you will be able to: Understand the Sketcher workbench of CATIA V5. Start a new file in the Part
More informationAutoCAD Civil 3D 2010 ESSENTIALS
AutoCAD Civil 3D 2010 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Visit our website to learn more about this and other books: AutoCAD Civil
More informationThere are two distinct working environments, or spaces, in which you can create objects in a drawing.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Autocad Model Space and Paper Space Model Space vs. Paper Space Initial
More informationAssignment 3 Floor Plan CAD Fundamentals I Due February 1 Architecture 411
Due February 1 Architecture 411 Objective To learn to draft precise architectural plan drawings. To gain experience with CAD drafting tools and techniques. Exercise 1. Come up with a floor plan for a residence
More informationThis is a preview of the book "QCAD - An Introduction to Computer-Aided Design (CAD)" QCAD. An Introduction to ComputerAided Design (CAD)
QCAD An Introduction to ComputerAided Design (CAD) Andrew Mustun Table of Contents Introduction Part I: First Steps with QCAD Introducing the QCAD Application 8 15 16 The First Start 16 The Application
More informationAn introduction to 3D draughting & solid modelling using AutoCAD
An introduction to 3D draughting & solid modelling using AutoCAD Faculty of Technology University of Plymouth Drake Circus Plymouth PL4 8AA These notes are to be used in conjunction with the AutoCAD software
More informationIntroduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
More informationMastering AutoCAD 2008 and AutoCAD LT 2008
Mastering AutoCAD 2008 and AutoCAD LT 2008 George Omura ISBN: 978-0-470-13738-3 Paperback 1000 pages August 2007 Description Mastering AutoCAD 2008 and AutoCAD LT 2008 offers a unique blend of tutorial
More informationSolidWorks: Mirror, Revolve, and. Introduction to Robotics
SolidWorks: Mirror, Revolve, and Circular Pattern Introduction to Robotics Let s Review At this point we have learned the following: Extrude Boss/Base Extruded Cut Adding Relations and Dimensions Linear
More informationIntroduction to AutoCAD 2010
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 10 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Construct
More information2013 Getting Started Guide
2013 Getting Started Guide The contents of this guide and accompanying exercises were originally created by Nemetschek Vectorworks, Inc. Vectorworks Fundamentals Getting Started Guide Created using: Vectorworks
More informationIntroduction to Measurement Tools
Introduction to Measurement Tools Revu's built-in measurement tools make it easy to take length, area, perimeter, diameter, volume and radius measurements, count from PDFs and perform area cutouts. Compatibility
More informationDrawing an Approximate Representation of an Involute Spur Gear Tooth Project Description
Drawing an Approximate Representation of an Involute Spur Gear Tooth Project Description Create a solid model and a working drawing of the 24 pitch gears specified below. It is only necessary to create
More informationOnline Training Program Offered by CADCIM Technologies
Online Training Program Offered by CADCIM Technologies CADCIM Technologies provides effective and affordable online training on various software packages including Computer Aided Design and Manufacturing
More informationHow to create pop-up menus
How to create pop-up menus Pop-up menus are menus that are displayed in a browser when a site visitor moves the pointer over or clicks a trigger image. Items in a pop-up menu can have URL links attached
More informationUser's Guide. DeltaCad. Professional for Windows VERSION 8.0
User's Guide DeltaCad Professional for Windows VERSION 8.0 By Midnight Software, Inc. Copyright 1995-2013 by M idnight Software, Inc. All rights reserved. The contents of this manual are subject to copyright
More informationFDOT Plans Production Tools
FDOT State Kit for AutoCAD Civil 3D Mike Racca CADD APPLICATIONS SUPPORT Florida Department of Transportation (ECSO) Email: Mike.Racca@dot.state.fl.us Phone: 850-245-1631 GENERAL Civil 3D Plan Production
More informationDrawing a Bedroom Floorplan
Appendix A Drawing a Bedroom Floorplan In this chapter, you will learn the following to World Class standards: Draw a Bedroom Floorplan Draw the Bedroom Walls Draw and Dimension the Bedroom Door Draw and
More informationLearning Autodesk. Modeling, Analysis and Animation SDC. Randy H. Shih. Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.
Learning Autodesk Inventor 2012 Modeling, Analysis and Animation Randy H. Shih SDC Better Textbooks. Lower Prices. PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Visit the following
More informationCATIA for Design and Engineering. Version 5 Releases 14 & 15. David S. Kelley. Central Michigan University SDC
CATIA for Design and Engineering ersion 5 Releases 4 & 5 David S. Kelley Central Michigan University SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com TUTORIAL Extruded
More informationAutodesk Certification Exam Guide AutoCAD 2010
Autodesk Certification Exam Guide AutoCAD 2010 Preparation Guide for AutoCAD 2010 Certified Associate and AutoCAD 2010 Certified Professional Certification Exams. This guide is intended as a resource in
More informationIntroduction to Word 2007
Introduction to Word 2007 You will notice some obvious changes immediately after starting Word 2007. For starters, the top bar has a completely new look, consisting of new features, buttons and naming
More informationWhat s New V 11. Preferences: Parameters: Layout/ Modifications: Reverse mouse scroll wheel zoom direction
What s New V 11 Preferences: Reverse mouse scroll wheel zoom direction Assign mouse scroll wheel Middle Button as Fine tune Pricing Method (Manufacturing/Design) Display- Display Long Name Parameters:
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationProducing 2D Documentation from 3D Models in AutoCAD
Producing 2D Documentation from 3D Models in AutoCAD David Cohn 4D Technologies AC4689 Modeling in 3D is fine, but eventually you need to produce 2D drawings. In this class, you will learn about tools
More informationInteractive Drafting
Interactive Drafting Preface What's New Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA Version
More informationScientific Graphing in Excel 2010
Scientific Graphing in Excel 2010 When you start Excel, you will see the screen below. Various parts of the display are labelled in red, with arrows, to define the terms used in the remainder of this overview.
More informationPRACTICAS DE AUTOCAD LIMAC 1 PRACTICE CHAIR
PRACTICAS DE AUTOCAD LIMAC 1 PRACTICE CHAIR PRACTICAS DE AUTOCAD LIMAC 2 Setting Up for 3D Entiles Make or verify the setting shown in the chair drawing settings thable Command: VPOINT enter a view point
More informationCreating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
More informationCATIA Functional Tolerancing & Annotation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Functional Tolerancing and Annotation...2 Pull-down Menus...3 Insert...3 Functional Tolerancing and Annotation Workbench...4 Bottom Toolbar Changes...5 3D Grid Toolbar...5
More informationIntroduction to the TI-Nspire CX
Introduction to the TI-Nspire CX Activity Overview: In this activity, you will become familiar with the layout of the TI-Nspire CX. Step 1: Locate the Touchpad. The Touchpad is used to navigate the cursor
More informationGetting Started With DraftSight A Guide For AEC Users
Getting Started With DraftSight A Guide For AEC Users DraftSight.com Facebook.com/DraftSight Welcome to DraftSight a valuable tool for any AEC professional! DraftSight is more than a free, professional-grade
More informationCabri Geometry Application User Guide
Cabri Geometry Application User Guide Preview of Geometry... 2 Learning the Basics... 3 Managing File Operations... 12 Setting Application Preferences... 14 Selecting and Moving Objects... 17 Deleting
More informationApplying a circular load. Immediate and consolidation settlement. Deformed contours. Query points and query lines. Graph query.
Quick Start Tutorial 1-1 Quick Start Tutorial This quick start tutorial will cover some of the basic features of Settle3D. A circular load is applied to a single soil layer and settlements are examined.
More informationAdvanced Surface Modeling
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. ll rights reserved. Chapter dvanced Modeling Learning Objectives fter completing this chapter, you will be able
More informationBasic 2D Design Be sure you have the latest information!
Basic 2D Design mastercam x getting started tutorials Basic 2D Design December 2011 Be sure you have the latest information! Information might have been changed or added since this document was published.
More informationChapter 9. Editing Features. Learning Objectives
Chapter 9 Editing Features Learning Objectives After completing this chapter, you will be able to: Edit features. Edit sketches of the sketch based features. Edit the sketch plane of the sketch based features.
More informationAutoCAD 2015 and AutoCAD LT 2015. Essentials
AutoCAD 2015 and AutoCAD LT 2015 Essentials AutoCAD 2015 and AutoCAD LT 2015 Essentials Scott Onstott Senior Acquisitions Editor: Willem Knibbe Development Editor: Candace English Technical Editor: Ian
More informationCreating Drawings in Pro/ENGINEER
6 Creating Drawings in Pro/ENGINEER This chapter shows you how to bring the cell phone models and the assembly you ve created into the Pro/ENGINEER Drawing mode to create a drawing. A mechanical drawing
More informationWorking with the new enudge responsive email styles
Working with the new enudge responsive email styles This tutorial assumes that you have added one of the mobile responsive colour styles to your email campaign contents. To add an enudge email style to
More informationBrava 5.3 X Client User
Brava 5.3 X Client User Guide Table Of Contents Help Contents...1 New Features in this Release...3 What is CSF?...5 Why CSF?...7 All Toolbars...9 Viewing Tools...11 Magnification Tools...11 Zoom and Pan
More informationPowerPoint 2007: Basics Learning Guide
PowerPoint 2007: Basics Learning Guide What s a PowerPoint Slide? PowerPoint presentations are composed of slides, just like conventional presentations. Like a 35mm film-based slide, each PowerPoint slide
More informationDrawing a little mechanical part using LibreCAD
TUTORIAL Drawing a little mechanical part using LibreCAD Tutorial by Claudio Guarnieri CLAUDIO GUARNIERI: Drawing a little mechanical part using LibreCAD Page 1 of 17 Introduction Hello everyone! This
More informationTechnical Drawing. Dr. Anwar Abu-Zarifa. Dr. Anwar Abu-Zarifa. Islamic University Gaza. Industrial Engineering Department 1
Technical Drawing الرسم الھندسي Dr. Anwar Abu-Zarifa Dr. Anwar Abu-Zarifa. Islamic University Gaza. Industrial Engineering Department 1 Office: IT Building,Room: I413 OfficeHrs: 12:00 13:00(So,Tue,We)
More informationMicrosoft Office 2007 Orientation Objective 1: Become acquainted with the Microsoft Office Suite 2007 Layout
Microsoft Office 2007 Orientation Objective 1: Become acquainted with the Microsoft Office Suite 2007 Layout Microsoft Suite 2007 offers a new user interface. The top portion of the window has a new structure
More informationInventor. Keyboard Shortcuts
Keyboard Shortcuts Inventor shortcut keys, or keyboard shortcuts, allow you to access certain tools by pressing a single key or a key combination. Many shortcut keys correspond to command aliases. keys
More informationEXERCISE WORKBOOK. Beginning AutoCAD
EXERCISE WORKBOOK for Beginning AutoCAD 2005 by Cheryl R. Shrock Professor Drafting Technology Orange Coast College, Costa Mesa, Ca. INDUSTRIAL PRESS New York Copyright 2004 by Cheryl R. Shrock Printed
More informationAutodesk Inventor Fusion Technology Preview. Autodesk Inventor Fusion: Getting Started
Autodesk Inventor Fusion Technology Preview Autodesk Inventor Fusion: Getting Started Contents Chapter 1 Autodesk Inventor Fusion TP2................... 1 What is new in TP2?............................
More informationDWFTM. Tips &Tricks. Publish View & Print Review & Mark Up
DWFTM Tips &Tricks Publish View & Print Review & Mark Up Sharing complex design information has never been easy. Since design files are large, sending sheet sets and 3D models to printers or sharing work
More informationDrawing Views with AutoCAD 2013: 2D Drawings from AutoCAD 3D Models AC2290-L and AC7046-L (repeat)
Drawing Views with AutoCAD 2013: 2D Drawings from AutoCAD 3D Models AC2290-L and AC7046-L (repeat) Drawing Views with AutoCAD 2013: 2D Drawings from AutoCAD and Autodesk Inventor 3D Models - AC6423-V J.C.
More informationSpatial Adjustment Tools: The Tutorial
Spatial Adjustment Tools: The Tutorial By Peter Kasianchuk, ESRI Educational Services In this exercise, you will perform some spatial adjustment and data management operations data to be used in analysis
More informationMicrosoft Word 2010. Quick Reference Guide. Union Institute & University
Microsoft Word 2010 Quick Reference Guide Union Institute & University Contents Using Word Help (F1)... 4 Window Contents:... 4 File tab... 4 Quick Access Toolbar... 5 Backstage View... 5 The Ribbon...
More informationAutodesk Civil 3D Styles: A Guide to the Fundamentals
AUTODESK CIVIL 3D WHITE PAPER Autodesk Civil 3D Styles: A Guide to the Fundamentals About the Author: Mark Scacco, PE, is the founder and president of Engineered Efficiency, Inc., a technology consulting
More informationAutoCAD Command Shortcuts
AutoCAD Command Shortcuts IN THIS GUIDE This guide lists AutoCAD shortcuts in groups according to the command sequence. For example, all text relevant shortcuts are grouped together. Quick Link BLOCKS
More informationTask Force on Technology / EXCEL
Task Force on Technology EXCEL Basic terminology Spreadsheet A spreadsheet is an electronic document that stores various types of data. There are vertical columns and horizontal rows. A cell is where the
More informationData Visualization. Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004
Data Visualization Prepared by Francisco Olivera, Ph.D., Srikanth Koka Department of Civil Engineering Texas A&M University February 2004 Contents Brief Overview of ArcMap Goals of the Exercise Computer
More informationSmart Board Notebook Software A guide for new Smart Board users
Smart Board Notebook Software A guide for new Smart Board users This guide will address the following tasks in Notebook: 1. Adding shapes, text, and pictures. 2. Searching the Gallery. 3. Arranging objects
More informationAutoCAD. Guide. applications.
AutoCAD 2016 Preview Guide Design every detail with Autodesk AutoCAD software, one of the world s leading CAD applications. Create stunning 2D and 3D designs with robust tools that cann produce almost
More informationPro/ENGINEER Wildfire 5.0 Introduction to Surface Modeling
Introduction Several advanced surface types are available as listed below. Variable Section Sweep Boundary Blend Section to Surfaces Blend Surface to Surface Blend A surface is created by sweeping a single
More informationTurboCAD Architectural
TurboCAD Architectural Version 15 Getting Started Guide IMSI/Design LLC, US 100 Rowland Blvd. Novato. CA 94945, USA Tel: +1-415-878-4000 Fax: +1-415-897-2544 Web Site www.imsisoft.com www.turbocad.com
More informationLession: 2 Animation Tool: Synfig Card or Page based Icon and Event based Time based Pencil: Synfig Studio: Getting Started: Toolbox Canvas Panels
Lession: 2 Animation Tool: Synfig In previous chapter we learn Multimedia and basic building block of multimedia. To create a multimedia presentation using these building blocks we need application programs
More informationIntroduction to AutoCAD 2007
Introduction to AutoCAD 2007 Alf Yarwood Chapter 10 Exercise 1 1. Open AutoCAD 2007 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Construct the drawing
More informationMerging Labels, Letters, and Envelopes Word 2013
Merging Labels, Letters, and Envelopes Word 2013 Merging... 1 Types of Merges... 1 The Merging Process... 2 Labels - A Page of the Same... 2 Labels - A Blank Page... 3 Creating Custom Labels... 3 Merged
More informationCreate a Poster Using Publisher
Contents 1. Introduction 1. Starting Publisher 2. Create a Poster Template 5. Aligning your images and text 7. Apply a background 12. Add text to your poster 14. Add pictures to your poster 17. Add graphs
More information