ENGINEER SPECIFICATIONS

Transcription

1 ENGINEER SPECIFICATIONS MODEL: MP-32V APPROVED BY : Date : Page 1

2 REVISION HISTORY: Revision No. Date Released Page Description /12/1 ALL New Release /1/ /2/11 size /08/22 MTBF Page 2

3 Table of Contents 1. ELECTRICAL PERFORMANCE 4 2. PICTURE PERFORMANCE 6 3. LUMINANCE OUTPUT 8 4. APPROVALS 9 5. RELIABILITY 9 6. MECHANICAL SPECIFICATIONS EXTERNAL CONTROLS PLUG & PLAY DISPLAY POWER MANAGEMENT ATTACHMENTS TIMING 13 Page 3

4 1 ELECTRICAL PERFORMANCE All items must be performed under "standard test conditions" unless otherwise specified. 1.1 STANDARD TEST CONDITIONS -Warm up time: 30 minutes -AC supply voltage: 100 ~ 240 VAC universal -Ambient temperature: 25 +/- 5 -Humidity: 10 ~ 90 % -Display mode : 1360x768/ 60Hz -Input signal (VGA): 0.7 Vpp -External controls for picture position and size : Preset condition -Video generator : Chroma 2135 or equivalent 1.2 LCD PANEL GENERAL SPECIFICATIONS -Model name : Au T315XW01_V5 (EOL) T315XW02 V.C -Screen diagonal : 32.0 inch -Display Area : (H) x (V)mm -Pixel Pitch: mm -Support Colors: 16.7M colors (R,G,B 8-bit) -Number of Pixel : 1366(R,G,Bx3)x768 -Pixel Arrangement: RGB vertical stripe -Typical white luminance : 500 cd/m 2 (Typ) -Contrast Ratio : 1200:1 -Viewing Angle : 88 (left), 88(right ), 88(up), 88(down) CR=10 -Signal Frequency : 30-48KHz -Frame rate: 60Hz typ -Response Time: 16 ms typ.(trr+ TrD) -Specifications are subject to change in different panel used Page 4

5 1.3 POWER SUPPLY AC INPUT RANGE -Voltage: 100 ~ 230 VAC universal -Frequency: 60 / 50 Hz POWER CONSUMPTION 140 W max. at the specified voltage and frequency INRUSH CURRENT -Will not exceed 60Ap-p at 264V input for a cold start at 25 c PULL-IN RANGE OF SYNCHRONIZATION -Horizontal frequency: 30 KHz ~ 48 KHz -Vertical frequency: 50 Hz ~ 60 Hz 1.5 INPUT SIGNAL R.G.B(Analog) Level: 0.7 Vpp Sync Input H.V. Separate Sync. TTL compatible Page 5

6 2 PICTURE PERFORMANCE -Implies "standard test conditions" unless otherwise specified. -Values were measured after 10 minutes warm-up period. 2.1 RMAL DISPLAY SIZE -H=697.68mm -V=392.26mm 2.2 PICTURE SIZE AND POSITION OFFSET H-size V-size H-offset V-offset mm mm a b < = 0. 5 mm c d < = 0. 5 mm Page 6

7 2.3 TILT AB-CD = Tilt on top < =0. 5 mm EF-GH = Tilt on bottom < = 0. 5 mm 2.4 DISPLAY QUALITY -A class Page 7

8 3. WHITE LUMINANCE Under standard test conditions 3.1 BRIGHTNESS LEVEL -Input full white pattern. More than 400 cd/m 2 at center of screen with brightness and contrast at max. 3.2 BRIGHTNESS UNIFORMITY -White uniformity of these 5 points is defined as below. -( Min. brightness / Max. brightness ) x 100% >= 80% 3.3 COLOR TEMPERATURE -x= /- 10% -y= /- 10% -Test at 9300 K Preset 380 cd/m 2 -x= /- 10% -y= /- 10% -Test at 6500 K Preset 400 cd/m FOCUS -Light output setup: Pattern: full white Contrast: 50% Brightness: 380 cd/m 2 -Test pattern: Chroma pattern 5 -Distance : 30cm away from screen -Clear and vision able shape Page 8

9 4. APPROVALS CE, UL, FCC (class B), RoHS 5. RELIABILITY 5.1 MONITOR MTBF The MTBF of the monitor is at least hours (Except LCD Panel)use 5.2 AMBIENCE Operating temperature : 5 ~ 35 Storage temperature : -20 ~ 60 Humidity: 10 ~ 90% Page 9

10 6. MECHANICAL SPECIFICATIONS 6.1 MAIN DIMENSIONS -Width: 789 mm -Height: 479 mm -Depth: 91.2 mm 6.2 WEIGHT (REFERENCE) -Net: 13.5Kg -Gross: 16.0Kg 6.3 PLASTIC / METAL - METAL - The material for the front panel, back cover, is SECC 6.4 CONNECTOR 15pin D-sub Input Connector(CN11) Pin No Signal Pin No Signal 1 Red Input 9 NC 2 Green Input 10 GND 3 Blue Input 11 NC 4 NC 12 SDA 5 GND 13 Horizontal Sync. 6 RED Return 14 Vertical Sync. 7 Green Return 15 SCL 8 Blue Return 6.5 FORNT APPEARANCE a. MP-32V see attachment drawing Page 10

11 7. EXTERNAL CONTROLS Front Controls : The Power key is power on/off. The Auto key is Auto Tune and OSD Off The Up key is Adjust the volume and move select The Down key is Volume mute and move select The Menu key is OSD On and Enter OSD Menu : Signal Select, Video, Audio, Color, Image, Language, Tools, Exit Signal Select Video Audio Color Image Language Tools Exit VGA Exit Brightness Contrast Exit Volume Exit Color Temperature User, 6500k, 9300k, Exit Exit Auto tune Clock Phase H. Poshition V. Poshition Exit English Francais Deautsch Italiano Espanol 日本語 中文繁 中文簡 OSD Control Recall Sharpness Exit OSD Timer, OSD H.Position, OSD V.Position, Exit Page 11

12 8. PLUG & PLAY The Display Data Channel "DDC" function will allow the inform the host system about its identity and depending on the level of DDC used, communicate additional level of display capabilities. DDC1: One uni-directional data channel DDC2: One bi-directional data channel MP-32V can support DDC 1 / 2 B 9. DISPLAY POWER MANAGEMENT 9.1 DEFINITION OF MODES There are three mode of operation for the MP-32V These are ON, STAND-BY/ SUSPEND and OFF ON : Both Horizontal and Vertical syncs are present and the monitor is in normal operation STAND-BY & SUSPEND : Horizontal or Vertical sync is inactive per VESA DPMS and all parts not operational. The monitor is able to perform a quick start when both horizontal and Vertical signals are active again. OFF : Both Horizontal and Vertical sync are inactive per VESA DPMS and all parts of the monitor are disabled. This is the lowest possible power state of the monitor that maintains an automatic on when both the Horizontal and Vertical signals are active again. Recovery time will take longer than Stand-by / Suspend mode 9.2 POWER CONSUMPTION Normal operation: 140Wx.) Stand-by/Suspend mode: < 3 W Off mode: < 3 W Page 12

13 10. ATTACHMENT NAME PIXEL RATE VGA640X MHz VGA720X MHz VGA640X MHz VESA800X MHz VESA1024X MHz INTERLACE VIDEO SYNC ON G? SYNC LEVEL VIDEO LEVEL WHITE LEVEL BLACK LEVEL 16 BIT DATA ANALOG-COLOR - 0 IRE 0000 ANALOG-COLOR - 0 IRE 0000 ANALOG-COLOR - 0 IRE 0000 ANALOG-COLOR - 0 IRE 0000 ANALOG-COLOR - 0 IRE 0000 H TOTAL H DISPLAY H B-PORCH HS WIDTH H BORDER H SIZE 800 = us 640 = us 48 =1.907 us 96 =3.813 us 8 =0.318 us 4.000mm 900 = us 720 = us 54 =1.907 us 108 =3.813 us 9 =0.318 us 4.000mm 800 = us 640 = us 48 =1.907 us 96 =3.813 us 8 =0.318 us 4.000mm 1056 = us 800 = us 88 =2.200 us 128 =3.200 us 0 =0.000 us 4.000mm 1344 = us 1024 = us 160 =2.462 us 136 =2.092 us 0 =0.000 us 4.000mm V TOTAL V DISPLAY V B-PORCH VS WIDTH V BORDER V SIZE 449 = ms 350 = ms 60 =1.907 ms 2 =0.064 ms 6 =0.191 ms 3.000mm 449 = ms 400 = ms 35 =1.112 ms 2 =0.064 ms 7 =0.222 ms 3.000mm 525 = ms 480 = ms 33 =1.049 ms 2 =0.064 ms 8 =0.254 ms 3.000mm 628 = ms 600 = ms 23 =0.607 ms 4 =0.106 ms 0 =0.000 ms 3.000mm 806 = ms 768 = ms 29 =0.600 ms 6 =0.124 ms 0 =0.000 ms 3.000mm HS OUTPUT VS OUTPUT XS OUTPUT XS SELECT ON(-) SERR ON(-) SERR ON(-) ON(-) SERR SERR ON(-) ON(-) SERR Fh fv = KHz = Hz = KHz = Hz = KHz = Hz = KHz = Hz = KHz = NAME PIXEL RATE 1360X MHz INTERLACE VIDEO SYNC ON G? SYNC LEVEL VIDEO LEVEL WHITE LEVEL BLACK LEVEL 16 BIT DATA ANALOG-COLOR YES 300mv 0 IRE 0000 H TOTAL H DISPLAY H B-PORCH HS WIDTH H BORDER H SIZE 1792 = us 1360 = us 256 =2.994 us 112 =1.310 us 0 =0.000 us 4.000mm V TOTAL V DISPLAY V B-PORCH VS WIDTH V BORDER V SIZE 795 = ms 768 = ms 18 =0.377 ms 6 =0.126 ms 0 =0.000 ms 3.000mm HS OUTPUT VS OUTPUT XS OUTPUT XS SELECT SERR Fh fv = KHz = Hz Page 13

14 Vendor Richardson Electronics GmbH Division A.C.T. Kern Raiffeisenstraße 5 D Donaueschingen Internet: Tel.: +49 (0) Fax.: +49 (0) VAT-No.: DE WEE-Reg.-Nr.: DE Page 14