SIMATIC S Technical slides. Siemens SA Tous droits réservés.

Size: px

Start display at page:

Leonard Barton
7 years ago
Views:

1 Technical slides

2 Design

Dimension and configuration Hardware Dimensions almost matching the S7-300 s Two ways for mounting the modules: U connector between each module (as for the S7-300) Up to 32 modules in one line

3 Dimension and configuration Hardware Dimensions almost matching the S7-300 s Two ways for mounting the modules: U connector between each module (as for the S7-300) Up to 32 modules in one line Divided in power sections Backplane bus (as for S7-400)* Possible redundant power supply for backplane bus Up to 39 modules on 3 lines Hot Swapping Module exchange when runing * Not available yet ( )

4 Number of modules that can be installed S7-300, ET200M S7-300 in centralized config: up to 32 modules but extra couplers required ET 200M in decentralized config: up to 12 modules S S in centralized and ET 200MP in decentralized config: up to 32 modules (without extra coupler required) 32 modules S max. Spare of the coupling modules price and space economy

Wiring Standardized front connector Simplified ordering and stock handling Standardized cabling (interchangeability of the modules /connectors) Pre-wiring position No electrical connection

5 Wiring Standardized front connector Simplified ordering and stock handling Standardized cabling (interchangeability of the modules /connectors) Pre-wiring position No electrical connection between the module and the connector. Easy rewiring during even with the installation running Cabling and maintenance help (signal LEDs, labels,..) Simple installation avoiding mistakes and sparing time

6 Wiring - TOP Connect Flexible connection Pre-wired connectors Available length: 2.5, 3.2, 5, 6.5, 8 et 10m With 20 or 40 conductors Modular connexion Simplified wiring toward remote connection module Cables equipped with connectors of length from 0.5 to 10m. Different possible connection modules For a simplified wiring of the electrical cabinet

7 Performance comparison between CPU319-3PN/DP and CPU1518-4PN/DP 10 ms 27 ms 10 ms 78% -96% -90% Cycle time 2.17 ms Cycle time 1 ms Cycle time 1 ms CPU PN/DP CPU PN/DP (standard DB) CPU PN/DP CPU PN/DP (optimized DB) CPU PN/DP CPU PN/DP (optimized DB) cyclic time for User program code in CPU PLC Open Bemchmark assumed cycle time for customer projects

8 Power supply concept * S7-300 : PS S : PM S7-400 : PS S : PS External power supply PM = Power Module External power supply providing the 24VDC. Used for the supply of the PLCs, the inputs/outputs electronic modules, eventually the detectors and actors. Without U connector, No diagnostic information in the TIA Portal System power supply PS = Power Supply Module Internal supply in backplane bus voltage for the modules (internal electronic of the modules) One or more PS can be inserted in any place on the rack With U connector Diagnostic information in the TIA Portal

* SIMATIC S7-1500 Supply concept System and external supply PM CPU / IM Modules (IO, CM, CP, TM) CC/CC Supply section 1 (max.

9 * SIMATIC S Supply concept System and external supply PM CPU / IM Modules (IO, CM, CP, TM) CC/CC Supply section 1 (max. 10 modules*) System supply : via CPU/IM Internal supply of the modules through the backplane bus («internal» electronics) * Number of modules depending on the power consumption of the modules 24 V CC External supply : via PM = Power Module 120/230 V CA Detectors Actors Supply of the modules (CPU, IM, modules, PS) and eventually the detectors/actors

* SIMATIC S7-1500 Supply concept System and external supply PM CPU / IM Modules (IO, CM, CP, TM) CC/CC Supply section 1 (max. 10 modules*) PS Modules (IO, CM, CP, TM) Supply section 2 (max.

10 * SIMATIC S Supply concept System and external supply PM CPU / IM Modules (IO, CM, CP, TM) CC/CC Supply section 1 (max. 10 modules*) PS Modules (IO, CM, CP, TM) Supply section 2 (max. n modules**) CC/CC System supply : via CPU/IM Internal supply of the modules through the backplane bus («internal» electronics) * Number of modules depending on the power consumption of the modules via PS = Power Supply Module (in option) Internal supply of the modules through the backplane bus («internal» electronics) ** Number of modules depending on the power consumption of the modules and the PS power 24 V CC External supply : via PM = Power Module 120/230 V CA Detectors Actors Supply of the modules (CPU, IM, modules, PS) and eventually the detectors/actors

* SIMATIC S7-1500 Supply concept Power balancing Power balancing: During configuration, the system checks that the

11 * SIMATIC S Supply concept Power balancing Power balancing: During configuration, the system checks that the consumption of the modules doesn t exceed what the CPU and PS can provide The PLC participates to the backplane bus supply.

CPU S7-1500 SIMATIC Memory Card Memory card with standard file system Necessary for the system as Load memory (as for the S7-300) Extended life time (500 000 write access guaranteed) Handling of the

12 CPU S SIMATIC Memory Card Memory card with standard file system Necessary for the system as Load memory (as for the S7-300) Extended life time ( write access guaranteed) Handling of the files with help of a standard PC (SD card with FAT32 file system) No data loss during PLC stop/power off Copy protection (possible program linked to the SN of the card) Industrial grade, 10 years spare part, Memory capacity from 4MB to 32GB

CPU S7-1500 Communication options Same PROFINET functionalities for each PROFINET as standard interface for the connection to the field bus PROFINET IO IRT (isochronous mode included) Shared Device

13 CPU S Communication options Same PROFINET functionalities for each PROFINET as standard interface for the connection to the field bus PROFINET IO IRT (isochronous mode included) Shared Device idevice 2 interfaces (PN IO and PN Basis) for the PLCs from CPU1515 model for network separation. Integrated Web Server with customized Web pages Access to the memory card via the web server Optimum integration of PROFIBUS and PROFINET communication modules Direct transfer of the I/O data in the image memory Uniform function blocs SEND /RECEIVE (TSEND, TRCV) for the local interfaces as well as communication modules

Services Communication interfaces SIMATIC S7-1500 Hardware ETHERNET PROFINET PROFIBUS Resources Diagnostics CP 1543-1 Open IE Communication TCP UDP ISO-on-TCP SNMP DCP LLDP ICMP SIMATIC -

14 Services Communication interfaces SIMATIC S Hardware ETHERNET PROFINET PROFIBUS Resources Diagnostics CP Open IE Communication TCP UDP ISO-on-TCP SNMP DCP LLDP ICMP SIMATIC - CPU PN/DP IO-Controller I-Device MRP PROFINET ETHERNET TCP Web Server ARP HTTP HTTPS Open IE Communication UDP ISO-on-TCP SNMP DCP LLDP ICMP ARP S7-Comm. Web Server HTTP HTTPS S7-Comm.

Communication interfaces SIMATIC S7-1500 Hardware ETHERNET PROFINET PROFIBUS Resources Diagnostics CP 1543-1 S7-1500 PROFINET PN IO- Controller I-Device S7-Comm. Open IE- Comm.

15 Communication interfaces SIMATIC S Hardware ETHERNET PROFINET PROFIBUS Resources Diagnostics CP S PROFINET PN IO- Controller I-Device S7-Comm. Open IE- Comm. Web Server MRP ETHERNET The PROFINET can also be configured as I-Device. The Ethernet interface supports the basics services of PROFINET. The Ethernet interface allows a network separation. Both interfaces support auto-negotiation and auto-crossing. PROFINET ETHERNET

16 Display Start view State Accessible devices Diagnostic

17 Screen Screen available on each 1500 PLC Access to the SN and reference number of the device as well as FW version. User s logo display possible. Definition of the IP address, PROFINET name during commissioning Diagnostic : Every error message displayed in clear text Process variables viewing/forcing Module state for centralized/decentralized devices Replaces the key switch (RUN/RUN-P mode for the S7-400) Display switching between 2 languages. Withdrawing from the running PLC possible (PLC remains in run). Available as spare part (2 models)

18 Merci de votre attention! Michel Avondet Technical Account Manager for CERN

S7-1500/S7-1500F Technical Data

S7-1500/S7-1500F Technical Data CPU 1511-1 PN CPU 1513-1 PN CPU 1515-2 PN Type Standard CPU Standard CPU Standard CPU Dimensions 35 x 125 x 130 mm 35 x 125 x 130 mm 70 x 147 x 129 mm Spare part availability after 10 years 10 years 10