Connecting the CX-Programmer Section 1-3

Transcription

1 Installing the USB Driver The procedure for first connecting a computer to the CP1L peripheral USB port is described below. It is assumed that the Support Software has already been installed in the computer. Windows XP Turn ON the power supply to the CP1L, and connect USB cable between the USB port of the computer and the peripheral USB port of the CP1L. After the cable has been connected, the computer will automatically recognize the device and the following message will be displayed. 1,2, If the following window appears, select the No, not this time Option and then click the Next Button. This window is not always displayed. 2. The following window will be displayed. Select the Install from a list of specific location Option and then click the Next Button. 21

2 3. The following window will be displayed. Click the Browse Button for the Include this location in the search Field, specify C:\Program Files\ OMRON\CX-Server\USB\win2000_XP\Inf, and then click the Next Button. The driver will be installed. ( C:\ indicates the installation drive and may be different on your computer.) 4. Ignore the following window if it is displayed and click the Continue Anyway Button. 22

3 5. The following window will be displayed if the installation is completed normally. Click the Finish Button. Windows 2000 Turn ON the power supply to the CP1L, and connect USB cable between the USB port of the computer and the peripheral USB port of the CP1L. After the cable has been connected, the computer will automatically recognize the device and the following message will be displayed. 1,2, The following message will be displayed. Click the Next Button. 23

4 2. The following window will be displayed. 3. Select the Search for a suitable driver for the device (recommended) Option and then click the Next Button. The following window will be displayed. From the list in the window, select the Specify location Checkbox and then click the Next Button. 4. Click the Browse Button, specify C:\Program Files\OMRON\CX-Server\USB\win2000_XP\Inf, and then click the Next Button. ( C:\ indicates the installation drive and may be different on your computer.) 24

5 5. A search will be made for the driver and the following window will be displayed. Click the Next Button. The driver will be installed. 6. After the driver has been successfully installed, the following window will be displayed. Click the Finish Button. Connection Setup Using the CX-Programmer 1,2, Select CP1L as the device type in the Change PLC Dialog Box and confirm that USB is displayed in the Network Type Field. 25

6 Checking after Installation 2. Click the OK Button to finish setting the PLC model. Then connect to the CP1L by executing the CX-Programmer's online connection command. 1,2, Display the Device Manager at the computer. 2. Click USB (Universal Serial Bus) Controller, and confirm that OMRON SYSMAC PLC Device is displayed. Re-installing the USB Driver If the USB driver installation fails for some reason or is cancelled in progress, the USB driver must be reinstalled. Checking USB Driver Status 1,2, Display the Device Manager on the computer. 2. If USB Device is displayed for Other devices, it means that the USB driver installation has failed. 26

7 Reinstalling the USB Driver 1,2, Right-click USB Device and select Delete from the pop-up menu to delete the driver. 2. Reconnect the USB cable. The USB Driver Installation Window will be displayed. 3. Reinstall the USB driver Connecting to a Serial Port Mounting a CP1W-CIF01 RS-232C Option Board in a CP1L Option Board slot makes it possible to connect Support Software with serial communications, just as with previous models. Personal computer CX-One (e.g., CX-Programmer) Recommended cable XW2Z-200S-CV (2 m) or XW2Z-500S-CV (5 m) D-Sub connector (9-pin, female) D-Sub connector (9-pin, male) CP1W-CIF01 RS-232C Option Board Connection Method Connect the CX-Programmer to the RS-232C port of the CP1W-CIF01 Option Board by XW2Z-200S-CV/500S-CV RS-232C cable. Connect the Programming Device using the Connecting Cable that is appropriate for the serial communications mode of the computer and CPU Unit. Computer Connecting Cable CP1L CPU Unit Model Connector Model Length Connector Serial communications mode IBM PC/AT or compatible D-Sub 9 pin, male XW2Z-200S-CV 2 m D-Sub 9 pin, female XW2Z-500S-CV 5 m (With a CP1W-CIF01 RS- 232C Option Board mounted in Option Board Slot 1 or 2.) Peripheral bus or Host Link (SYSWAY) 27