DDR3 SDRAM SODIMM MT16JTF25664HZ 2GB MT16JTF51264HZ 4GB. Features. 2GB, 4GB (x64, DR) 204-Pin DDR3 SODIMM. Features
|
|
- Lenard McCoy
- 7 years ago
- Views:
Transcription
1 DDR3 SDRAM SODIMM MT6JTF5664HZ GB MT6JTF564HZ 4GB GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Features Features DDR3 functionality and operations supported as defined in the component data sheet 04-pin, small-outline dual in-line memory module (SODIMM) Fast data transfer rates: PC3-4900, PC3-800, PC3-0600, PC3-8500, or PC GB (56 Meg x 64), 4GB (5 Meg x 64) V DD =.5V ±0.075V V DDSPD = V Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Dual rank Serial presence-detect (SPD) EEPROM 8 internal device banks Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) Selectable BC4 or BL8 on-the-fly (OTF) Gold edge contacts Halogen-free Fly-by topology Terminated control, command, and address bus Figure : 04-Pin SODIMM (MO-68 R/C F) Module height: 30mm (.8in) Options Marking Operating temperature Commercial (0 C T A +70 C) None Industrial ( 40 C T A +85 C) I Package 04-pin DIMM (halogen-free) Z Frequency/CAS CL = 3 (DDR3-866) CL = (DDR3-600) CL = 9 (DDR3-333) CL = 7 (DDR3-066) -G Note:. Contact Micron for industrial temperature module offerings. Table : Key Timing Parameters Speed Grade Industry Nomenclature Data Rate (MT/s) CL = 3 CL = CL = 0 CL = 9 CL = 8 CL = 7 CL = 6 CL = 5 -G9 PC G6 PC G4 PC G PC G0 PC B PC t RCD (ns) t RP (ns) t RC (ns) PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 00 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice.
2 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Features Table : Addressing Parameter GB 4GB Refresh count 8K 8K Row address 6K A[3:0] 3K A[4:0] Device bank address 8 BA[:0] 8 BA[:0] Device configuration Gb (8 Meg x 8) Gb (56 Meg x 8) Column address K A[9:0] K A[9:0] Module rank address S#[:0] S#[:0] Table 3: Part Numbers and Timing Parameters GB Modules Base device: MT4J8M8, Gb DDR3 SDRAM Part Number Module Density Configuration Module Bandwidth Memory Clock/ Data Rate Clock Cycles (CL- t RCD- t RP) MT6JTF5664H(I)Z-G6 GB 56 Meg x 64.8 GB/s.5ns/600 MT/s -- MT6JTF5664H(I)Z-G4 GB 56 Meg x GB/s.5ns/333 MT/s MT6JTF5664H(I)Z-G GB 56 Meg x GB/s.87ns/066 MT/s Table 4: Part Numbers and Timing Parameters 4GB Modules Base device: MT4J56M8, Gb DDR3 SDRAM Part Number Module Density Configuration Module Bandwidth Memory Clock/ Data Rate Clock Cycles (CL- t RCD- t RP) MT6JTF564H(I)Z-G9 4GB 5 Meg x GB/s.07ns/866 MT/s MT6JTF564H(I)Z-G6 4GB 5 Meg x 64.8 GB/s.5ns/600 MT/s -- MT6JTF564H(I)Z-G4 4GB 5 Meg x GB/s.5ns/333 MT/s MT6JTF564H(I)Z-G 4GB 5 Meg x GB/s.87ns/066 MT/s Notes:. The data sheet for the base device can be found on Micron s Web site.. All part numbers end with a two-place code (not shown) that designates component and PCB revisions. Consult factory for current revision codes. Example: MT6JTF564HZ-G4M. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 00 Micron Technology, Inc. All rights reserved.
3 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Pin Assignments Pin Assignments Table 5: Pin Assignments 04-Pin DDR3 SODIMM Front 04-Pin DDR3 SODIMM Back Pin Symbol Pin Symbol Pin Symbol Pin Symbol Pin Symbol Pin Symbol Pin Symbol Pin Symbol V REF V DD V DD A BA BA RAS# V DD V DD WE# S0# 6 S3# 4 S0# DM0 63 DM3 5 CAS# 67 S0 64 S3 6 ODT V DD 69 S6# V DD 70 DM A3 7 S ODT S# NC V DD V DD CKE0 5 NC CKE 6 V REFCA V DD V DD NC NC S# 79 BA DM 80 NC/A S 8 V DD RESET# 8 V DD S7# 3 83 A 35 S4# 87 DM A 36 DM4 88 S A9 37 S A V DD V DD A A A A V DD SA V DD NF A V DDSPD A SDA 45 S# 97 A SA 46 DM 98 A SCL 47 S 99 V DD 5 03 V TT V DD 5 S5# 04 V TT 49 0 CK0 53 DM CK 54 S CK0# CK# 56 Note:. Pin 80 is NC for GB and A4 for 4GB. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 3 00 Micron Technology, Inc. All rights reserved.
4 Pin Descriptions Table 6: Pin Descriptions Symbol Type Description The pin description table below is a comprehensive list of all possible pins for all DDR3 modules. All pins listed may not be supported on this module. See Pin Assignments for information specific to this module. Ax Input Address inputs: Provide the row address for ACTIVE commands, and the column address and auto precharge bit (A0) for READ/WRITE commands, to select one location out of the memory array in the respective bank. A0 sampled during a PRECHARGE command determines whether the PRECHARGE applies to one bank (A0 LOW, bank selected by BAx) or all banks (A0 HIGH). The address inputs also provide the op-code during a LOAD MODE command. See the Pin Assignments Table for density-specific addressing information. BAx Input Bank address inputs: Define the device bank to which an ACTIVE, READ, WRITE, or PRECHARGE command is being applied. BA define which mode register (MR0, MR, MR, or MR3) is loaded during the LOAD MODE command. CKx, CKx# Input Clock: Differential clock inputs. All control, command, and address input signals are sampled on the crossing of the positive edge of CK and the negative edge of CK#. CKEx Input Clock enable: Enables (registered HIGH) and disables (registered LOW) internal circuitry and clocks on the DRAM. DMx Input Data mask (x8 devices only): DM is an input mask signal for write data. Input data is masked when DM is sampled HIGH, along with that input data, during a write access. Although DM pins are input-only, DM loading is designed to match that of the and S pins. ODTx Input On-die termination: Enables (registered HIGH) and disables (registered LOW) termination resistance internal to the DDR3 SDRAM. When enabled in normal operation, ODT is only applied to the following pins:, S, S#, DM, and CB. The ODT input will be ignored if disabled via the LOAD MODE command. Par_In Input Parity input: Parity bit for Ax, RAS#, CAS#, and WE#. RAS#, CAS#, WE# Input Command inputs: RAS#, CAS#, and WE# (along with S#) define the command being entered. RESET# Input (LVCMOS) Reset: RESET# is an active LOW asychronous input that is connected to each DRAM and the registering clock driver. After RESET# goes HIGH, the DRAM must be reinitialized as though a normal power-up was executed. Sx# Input Chip select: Enables (registered LOW) and disables (registered HIGH) the command decoder. SAx Input Serial address inputs: Used to configure the temperature sensor/spd EEPROM address range on the I C bus. SCL Input Serial clock for temperature sensor/spd EEPROM: Used to synchronize communication to and from the temperature sensor/spd EEPROM on the I C bus. CBx I/O Check bits: Used for system error detection and correction. x I/O Data input/output: Bidirectional data bus. Sx, Sx# I/O GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Pin Descriptions Data strobe: Differential data strobes. Output with read data; edge-aligned with read data; input with write data; center-aligned with write data. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 4 00 Micron Technology, Inc. All rights reserved.
5 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Pin Descriptions Table 6: Pin Descriptions (Continued) Symbol Type Description SDA I/O Serial data: Used to transfer addresses and data into and out of the temperature sensor/ SPD EEPROM on the I C bus. TSx, TSx# Err_Out# EVENT# Output Output (open drain) Output (open drain) Redundant data strobe (x8 devices only): TS is enabled/disabled via the LOAD MODE command to the extended mode register (EMR). When TS is enabled, DM is disabled and TS and TS# provide termination resistance; otherwise, TS# are no function. Parity error output: Parity error found on the command and address bus. Temperature event:the EVENT# pin is asserted by the temperature sensor when critical temperature thresholds have been exceeded. V DD Supply Power supply:.5v ±0.075V. The component V DD and V D are connected to the module V DD. V DDSPD Supply Temperature sensor/spd EEPROM power supply: V. V REFCA Supply Reference voltage: Control, command, and address V DD /. V REF Supply Reference voltage:, DM V DD /. Supply Ground. V TT Supply Termination voltage: Used for control, command, and address V DD /. NC No connect: These pins are not connected on the module. NF No function: These pins are connected within the module, but provide no functionality. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 5 00 Micron Technology, Inc. All rights reserved.
6 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Map Map Table 7: Component-to-Module Map (Front) Component Reference Number Component Module Module Pin Number Component Reference Number Component Module Module Pin Number U 0 5 U U U U U U U PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 6 00 Micron Technology, Inc. All rights reserved.
7 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Map Table 8: Component-to-Module Map (Back) Component Reference Number Component Module Module Pin Number Component Reference Number Component Module Module Pin Number U U U5 0 4 U U U U U PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 7 00 Micron Technology, Inc. All rights reserved.
8 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Functional Block Diagram Functional Block Diagram Figure : Functional Block Diagram S# S0# S0# S0 DM0 S4# S4 DM S# S DM DM CS# S# U DM CS# S# DM CS# S# DM CS# S# U6 VSS S5# S5 DM5 U9 U S# S DM S3# S3 DM3 DM CS# S# U7 DM CS# S# U DM CS# S# U0 DM CS# S# U S6# S6 DM S7# S7 DM7 DM CS# S# DM CS# S# U U7 U5 DM CS# S# DM CS# S# U DM CS# S# U9 DM CS# S# U Rank 0 = U, U, U7, U9, U, U, U7, U9 Rank = U5, U6, U8, U0, U5, U6, U8, U0 DM CS# S# DM CS# S# U U6 BA[:0] A[4/3:0] RAS# CAS# WE# CKE0 CKE ODT0 ODT RESET# BA[:0]: DDR3 SDRAMs A[4/3:0]: DDR3 SDRAMs RAS#: DDR3 SDRAMs CAS#: DDR3 SDRAMs WE#: DDR3 SDRAMs CKE0: Rank 0 CKE: Rank ODT0: Rank 0 ODT: Rank RESET#: DDR3 SDRAMs SCL U4 SPD EEPROM WP A0 A A SA0 SA V DDSPD V DD SDA CK0 CK0# CK CK# SPD EEPROM DDR3 SDRAM Rank 0 Rank CKE[:0], A[4:0], RAS#, CAS#, WE#, ODT[:0], BA[:0] CK[:0] CK#[:0] Command, address and clock line terminations DDR3 SDRAM DDR3 SDRAM V TT V DD V TT V REFCA V REF DDR3 SDRAM DDR3 SDRAM DDR3 SDRAM DDR3 SDRAM Note:. The ball on each DDR3 component is connected to an external 40Ω ±% resistor that is tied to ground. It is used for the calibration of the component s ODT and output driver. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 8 00 Micron Technology, Inc. All rights reserved.
9 General Description GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM General Description DDR3 SDRAM modules are high-speed, CMOS dynamic random access memory modules that use internally configured 8-bank DDR3 SDRAM devices. DDR3 SDRAM modules use DDR architecture to achieve high-speed operation. DDR3 architecture is essentially a 8n-prefetch architecture with an interface designed to transfer two data words per clock cycle at the I/O pins. A single read or write access for the DDR3 SDRAM module effectively consists of a single 8n-bit-wide, one-clock-cycle data transfer at the internal DRAM core and eight corresponding n-bit-wide, one-half-clock-cycle data transfers at the I/O pins. DDR3 modules use two sets of differential signals: S, S# to capture data and CK and CK# to capture commands, addresses, and control signals. Differential clocks and data strobes ensure exceptional noise immunity for these signals and provide precise crossing points to capture input signals. Fly-By Topology DDR3 modules use faster clock speeds than earlier DDR technologies, making signal quality more important than ever. For improved signal quality, the clock, control, command, and address buses have been routed in a fly-by topology, where each clock, control, command, and address pin on each DRAM is connected to a single trace and terminated (rather than a tree structure, where the termination is off the module near the connector). Inherent to fly-by topology, the timing skew between the clock and S signals can be easily accounted for by using the write-leveling feature of DDR3. Temperature Sensor with Serial Presence-Detect EEPROM Thermal Sensor Operations The temperature from the integrated thermal sensor is monitored and converts into a digital word via the I C bus. System designers can use the user-programmable registers to create a custom temperature-sensing solution based on system requirements. Programming and configuration details comply with JEDEC standard No. -C page 4.7-, "Definition of the TSE00av, Serial Presence Detect with Temperature Sensor." Serial Presence-Detect EEPROM Operation DDR3 SDRAM modules incorporate serial presence-detect. The SPD data is stored in a 56-byte EEPROM. The first 8 bytes are programmed by Micron to comply with JE- DEC standard JC-45, "Appendix X: Serial Presence Detect (SPD) for DDR3 SDRAM Modules." These bytes identify module-specific timing parameters, configuration information, and physical attributes. The remaining 8 bytes of storage are available for use by the customer. System READ/WRITE operations between the master (system logic) and the slave EEPROM device occur via a standard I C bus using the DIMM s SCL (clock) SDA (data), and SA (address) pins. Write protect (WP) is connected to, permanently disabling hardware write protection. For further information refer to Micron technical note TN-04-4, "Memory Module Serial Presence-Detect." PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 9 00 Micron Technology, Inc. All rights reserved.
10 Electrical Specifications Table 9: Absolute Maximum Ratings GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Electrical Specifications Stresses greater than those listed may cause permanent damage to the module. This is a stress rating only, and functional operation of the module at these or any other conditions outside those indicated in each device's data sheet is not implied. Exposure to absolute maximum rating conditions for extended periods may adversely affect reliability. Symbol Parameter Min Max Units V DD V DD supply voltage relative to V V IN, V OUT Voltage on any pin relative to V Table 0: Operating Conditions Symbol Parameter Min Nom Max Units Notes V DD V DD supply voltage V I VTT Termination reference current from V TT ma V TT Termination reference voltage (DC) command/address bus I I I OZ I VREF T A T C Input leakage current; Any input 0V V IN V DD ; V REF input 0V V IN 0.95V (All other pins not under test = 0V) Output leakage current; 0V V OUT V DD ; and ODT are disabled; ODT is HIGH Address inputs, RAS#, CAS#, WE#, BA S#, CKE, ODT, CK, CK# 0.49 V DD - 0mV 0.5 V DD 0.5 V DD + 0mV V µa DM 4 0 4, S, S# V REF supply leakage current; V REF = V DD / or V REFCA = V DD / (All other pins not under test = 0V) Module ambient operating temperature DDR3 SDRAM component case operating temperature µa µa Commercial 0 70 C, 3 Industrial C Commercial 0 95 C, 3, 4 Industrial C Notes:. V TT termination voltage in excess of the stated limit will adversely affect the command and address signals voltage margin and will reduce timing margins.. T A and T C are simultaneous requirements. 3. For further information, refer to technical note TN-00-08: Thermal Applications, available on Micron s Web site. 4. The refresh rate is required to double when 85 C < T C 95 C. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 0 00 Micron Technology, Inc. All rights reserved.
11 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM DRAM Operating Conditions DRAM Operating Conditions Recommended AC operating conditions are given in the DDR3 component data sheets. Component specifications are available on Micron s Web site. Module speed grades correlate with component speed grades, as shown below. Table : Module and Component Speed Grades DDR3 components may exceed the listed module speed grades; module may not be available in all listed speed grades Module Speed Grade Component Speed Grade -G9-07 -G6-5 -G4-5E -G -87E -G C -5E -80B -5 Design Considerations Simulations Micron memory modules are designed to optimize signal integrity through carefully designed terminations, controlled board impedances, routing topologies, trace length matching, and decoupling. However, good signal integrity starts at the system level. Micron encourages designers to simulate the signal characteristics of the system's memory bus to ensure adequate signal integrity of the entire memory system. Power Operating voltages are specified at the DRAM, not at the edge connector of the module. Designers must account for any system voltage drops at anticipated power levels to ensure the required supply voltage is maintained. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 00 Micron Technology, Inc. All rights reserved.
12 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM I DD Specifications I DD Specifications Table : DDR3 I DD Specifications and Conditions GB (All Die Revisions) Values are for the MT4J8M8 DDR3 SDRAM only and are computed from values specified in the Gb (8 Meg x 8) component data sheet Parameter Symbol Units Operating current 0: One bank ACTIVATE-to-PRECHARGE I DD ma Operating current : One bank ACTIVATE-to-READ-to-PRE- CHARGE I DD ma Precharge power-down current: Slow exit I DDP ma Precharge power-down current: Fast exit I DDP ma Precharge quiet standby current I DDQ ma Precharge standby current I DDN ma Precharge standby ODT current I DDNT ma Active power-down current I DD3P ma Active standby current I DD3N ma Burst read operating current I DD4R ma Burst write operating current I DD4W ma Refresh current I DD5B ma Self refresh temperature current: MAX T C = 85 C I DD ma Self refresh temperature current (SRT-enabled): MAX T C = 95 C I DD6ET ma All banks interleaved read current I DD ma Reset current I DD ma Notes:. One module rank in the active I DD ; the other rank in I DDP0 (slow exit).. All ranks in this I DD condition. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 00 Micron Technology, Inc. All rights reserved.
13 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM I DD Specifications Table 3: DDR3 I DD Specifications and Conditions 4GB (Die Revision H) Values are for the MT4J56M8 DDR3 SDRAM only and are computed from values specified in the Gb (56 Meg x 8) component data sheet Parameter Symbol Units Operating current 0: One bank ACTIVATE-to-PRE- CHARGE Operating current : One bank ACTIVATE-to-READto-PRECHARGE I DD ma I DD ma Precharge power-down current: Slow exit I DDP ma Precharge power-down current: Fast exit I DDP ma Precharge quiet standby current I DDQ ma Precharge standby current I DDN ma Precharge standby ODT current I DDNT ma Active power-down current I DD3P ma Active standby current I DD3N ma Burst read operating current I DD4R ma Burst write operating current I DD4W ma Refresh current I DD5B ma Self refresh temperature current: MAX T C = 85 C I DD ma Self refresh temperature current (SRT-enabled): MAX T C = 95 C I DD6ET ma All banks interleaved read current I DD ma Reset current I DD ma Notes:. One module rank in the active I DD ; the other rank in I DDP0 (slow exit).. All ranks in this I DD condition. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 3 00 Micron Technology, Inc. All rights reserved.
14 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM I DD Specifications Table 4: DDR3 I DD Specifications and Conditions 4GB (Die Revision M) Values are for the MT4J56M8 DDR3 SDRAM only and are computed from values specified in the Gb (56 Meg x 8) component data sheet Parameter Symbol Units Operating current 0: One bank ACTIVATE-to-PRE- CHARGE Operating current : One bank ACTIVATE-to-READto-PRECHARGE I DD ma I DD ma Precharge power-down current: Slow exit I DDP ma Precharge power-down current: Fast exit I DDP ma Precharge quiet standby current I DDQ ma Precharge standby current I DDN ma Precharge standby ODT current I DDNT ma Active power-down current I DD3P ma Active standby current I DD3N ma Burst read operating current I DD4R ma Burst write operating current I DD4W ma Refresh current I DD5B ma Self refresh temperature current: MAX T C = 85 C I DD ma Self refresh temperature current (SRT-enabled): MAX T C = 95 C I DD6ET ma All banks interleaved read current I DD ma Reset current I DD ma Notes:. One module rank in the active I DD ; the other rank in I DDP0 (slow exit).. All ranks in this I DD condition. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 4 00 Micron Technology, Inc. All rights reserved.
15 Temperature Sensor with Serial Presence-Detect EEPROM Serial Presence-Detect GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Temperature Sensor with Serial Presence-Detect EEPROM The temperature sensor continuously monitors the module's temperature and can be read back at any time over the I C bus shared with the SPD EEPROM. For the latest SPD data, refer to Micron's SPD page: Table 5: Temperature Sensor with SPD EEPROM Operating Conditions Parameter/Condition Symbol Min Max Units Supply voltage V DDSPD V Supply current: V DD = 3.3V I DD.0 ma Input high voltage: Logic ; SCL, SDA V IH.45 V DDSPD + V Input low voltage: Logic 0; SCL, SDA V IL 0.55 V Output low voltage: I OUT =.ma V OL 0.4 V Input current I IN µa Temperature sensing range 40 5 C Temperature sensor accuracy (class B).0.0 C Table 6: Temperature Sensor and EEPROM Serial Interface Timing Parameter/Condition Symbol Min Max Units Time bus must be free before a new transition can start t BUF 4.7 µs SDA fall time t F ns SDA rise time t R 000 ns Data hold time t HD:DAT ns Start condition hold time t H:STA 4.0 µs Clock HIGH period t HIGH µs Clock LOW period t LOW 4.7 µs SCL clock frequency t SCL 0 00 khz Data setup time t SU:DAT 50 ns Start condition setup time t SU:STA 4.7 µs Stop condition setup time t SU:STO 4.0 µs PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 5 00 Micron Technology, Inc. All rights reserved.
16 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Temperature Sensor with Serial Presence-Detect EEPROM EVENT# Pin The temperature sensor also adds the EVENT# pin (open-drain). Not used by the SPD EEPROM, EVENT# is a temperature sensor output used to flag critical events that can be set up in the sensor s configuration register. EVENT# has three defined modes of operation: interrupt mode, compare mode, and critical temperature mode. Event thresholds are programmed in the 0x0 register using a hysteresis. The alarm window provides a comparison window, with upper and lower limits set in the alarm upper boundary register and the alarm lower boundary register, respectively. When the alarm window is enabled, EVENT# will trigger whenever the temperature is outside the MIN or MAX values set by the user. The interrupt mode enables software to reset EVENT# after a critical temperature threshold has been detected. Threshold points are set in the configuration register by the user. This mode triggers the critical temperature limit and both the MIN and MAX of the temperature window. The compare mode is similar to the interrupt mode, except EVENT# cannot be reset by the user and returns to the logic HIGH state only when the temperature falls below the programmed thresholds. Critical temperature mode triggers EVENT# only when the temperature has exceeded the programmed critical trip point. When the critical trip point has been reached, the temperature sensor goes into comparator mode, and the critical EVENT# cannot be cleared through software. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 6 00 Micron Technology, Inc. All rights reserved.
17 GB, 4GB (x64, DR) 04-Pin DDR3 SODIMM Module Dimensions Module Dimensions Figure 3: 04-Pin DDR3 SODIMM Front view (.667) (.656) 3.8 (0.50) MAX.0 (0.079) R (X) U U U5 U6.8 (0.07) (X) U7 U8 U9 U0 0.0 (0.787) 30.5 (.87) 9.85 (.75) 6.0 (0.36).0 (0.079) 45 4X PIN.0 (0.039) 63.6 (.504) Back view 0.45 (0.08) 0.6 (0.04) PIN 03.0 (0.043) 0.90 (0.035) U U U4 U5 U6 U7 U8 U9 U0.55 (0.0) Notes: PIN (0.) PIN 39.0 (.535).0 (0.87) 4.8 (0.976) 4.0 (0.57). All dimensions are in millimeters (inches); MAX/MIN or typical () where noted.. The dimensional diagram is for reference only S. Federal Way, P.O. Box 6, Boise, ID , Tel: Customer Comment Line: Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur. PDF: 09005aef8445efe jtf6c56_5x64hz.pdf - Rev. C 5/ EN 7 00 Micron Technology, Inc. All rights reserved.
DDR3 SDRAM SODIMM MT16JSF25664HZ 2GB MT16JSF51264HZ 4GB. Features. 2GB, 4GB (x64, DR) 204-Pin Halogen-Free DDR3 SODIMM. Features
DDR3 SDRAM SODIMM MT6JSF5664HZ GB MT6JSF564HZ 4GB GB, 4GB (x64, DR) 04-Pin Halogen-Free DDR3 SODIMM Features Features DDR3 functionality and operations supported as defined in the component data sheet
More informationDDR3 SDRAM SODIMM MT8JSF25664HDZ 2GB. Features. 2GB (x64, DR) 204-Pin DDR3 SODIMM. Features. Figure 1: 204-Pin SODIMM (MO-268 R/C A)
DDR3 SDRAM SODIMM MT8JSF5664HDZ GB GB (x64, DR) 04-Pin DDR3 SODIMM Features Features DDR3 functionality and operations supported as defined in the component data sheet 04-pin, small-outline dual in-line
More informationDDR3 SDRAM SODIMM MT8JSF12864HZ 1GB MT8JSF25664HZ 2GB. Features. 1GB, 2GB (x64, SR) 204-Pin Halogen-Free DDR3 SDRAM SO- DIMM.
DDR3 SDRAM SO MT8JSF12864HZ 1GB MT8JSF25664HZ 2GB 1GB, 2GB (x64, SR) 204-Pin Halogen-Free DDR3 SDRAM SO- Features Features DDR3 functionality and operations supported as defined in the component data sheet
More informationDDR3 SDRAM UDIMM MT16JTF25664AZ 2GB MT16JTF51264AZ 4GB MT16JTF1G64AZ 8GB. Features. 2GB, 4GB, 8GB (x64, DR) 240-Pin DDR3 UDIMM.
DDR3 SDRAM UDIMM MT6JTF5664AZ GB MT6JTF564AZ 4GB MT6JTFG64AZ 8GB GB, 4GB, 8GB (x64, DR) 40-Pin DDR3 UDIMM Features Features DDR3 functionality and operations supported as per component data sheet 40-pin,
More informationDDR2 SDRAM SODIMM MT8HTF6464HDZ 512MB MT8HTF12864HDZ 1GB. Features. 512MB, 1GB (x64, DR) 200-Pin DDR2 SODIMM. Features
DDR SDRAM SODIMM MT8HTF6464HDZ 5MB MT8HTF864HDZ GB 5MB, GB (x64, DR) 00-Pin DDR SODIMM Features Features 00-pin, small-outline dual in-line memory module (SODIMM) Fast data transfer rates: PC-300, PC-400,
More informationDDR2 SDRAM SODIMM MT16HTF12864HZ 1GB MT16HTF25664HZ 2GB MT16HTF51264HZ 4GB. Features. 1GB, 2GB, 4GB (x64, DR) 200-Pin DDR2 SDRAM SODIMM.
DDR SDRAM SODIMM MT6HTF864HZ GB MT6HTF5664HZ GB MT6HTF564HZ 4GB GB, GB, 4GB (x64, DR) 00-Pin DDR SDRAM SODIMM Features Features 00-pin, small-outline dual in-line memory module (SODIMM) Fast data transfer
More informationDDR2 SDRAM UDIMM MT18HTF6472AY 512MB MT18HTF12872AY 1GB MT18HTF25672AY 2GB MT18HTF51272AY 4GB. Features
DDR SDRAM UDIMM MT8HTF647AY 5MB MT8HTF87AY GB MT8HTF567AY GB MT8HTF57AY 4GB 5MB, GB, GB, 4GB (x7, DR) 40-Pin DDR SDRAM UDIMM Features Features 40-pin, unbuffered dual in-line memory module Fast data transfer
More informationDDR2 SDRAM SODIMM MT8HTF12864HZ 1GB MT8HTF25664HZ 2GB. Features. 1GB, 2GB (x64, SR) 200-Pin DDR2 SDRAM SODIMM. Features
DDR2 SDRAM SODIMM MT8HTF12864HZ 1GB MT8HTF25664HZ 2GB 1GB, 2GB (x64, SR) 200-Pin DDR2 SDRAM SODIMM Features Features 200-pin, small-outline dual in-line memory module (SODIMM) Fast data transfer rates:
More informationDDR2 SDRAM SODIMM MT4HTF6464HZ 512MB. Features. 512MB (x64, SR) 200-Pin DDR2 SODIMM. Features. Figure 1: 200-Pin SODIMM (MO-224 R/C C)
DDR2 SDRAM SODIMM MT4HTF6464HZ 512MB 512MB (x64, SR) 200-Pin DDR2 SODIMM Features Features 200-pin, small-outline dual in-line memory module (SODIMM) Fast data transfer rates: PC2-3200, PC2-4200, PC2-5300,
More informationDDR2 SDRAM UDIMM MT16HTF6464AY 512MB MT16HTF12864AY 1GB MT16HTF25664AY 2GB MT16HTF51264AY 4GB. Features
DDR SDRAM UDMM MT6HTF6464AY 5MB MT6HTF864AY GB MT6HTF5664AY GB MT6HTF564AY 4GB 5MB, GB, GB, 4GB (x64, DR) 40-Pin DDR UDMM Features Features 40-pin, unbuffered dual in-line memory module Fast data transfer
More informationDDR3 SDRAM UDIMM MT8JTF12864A 1GB MT8JTF25664A 2GB
DDR3 SDRAM UDIMM MT8JTF12864A 1GB MT8JTF25664A 2GB 1GB, 2GB (x64, SR) 240-Pin DDR3 SDRAM UDIMM Features For component data sheets, refer to Micron s Web site: www.micron.com Features DDR3 functionality
More information1.55V DDR2 SDRAM FBDIMM
1.55V DDR2 SDRAM FBDIMM MT18RTF25672FDZ 2GB 2GB (x72, DR) 240-Pin DDR2 SDRAM FBDIMM Features Features 240-pin, fully buffered DIMM (FBDIMM) Very low-power DDR2 operation Component configuration: 256 Meg
More informationDDR SDRAM SODIMM. MT8VDDT3264H 256MB 1 MT8VDDT6464H 512MB For component data sheets, refer to Micron s Web site: www.micron.com
SODIMM MT8VDDT3264H 256MB 1 MT8VDDT6464H 512MB For component data sheets, refer to Micron s Web site: www.micron.com 256MB, 512MB (x64, SR) 200-Pin SODIMM Features Features 200-pin, small-outline dual
More informationDDR SDRAM UDIMM MT16VDDT6464A 512MB MT16VDDT12864A 1GB MT16VDDT25664A 2GB
DDR SDRAM UDIMM MT16VDDT6464A 512MB MT16VDDT12864A 1GB MT16VDDT25664A 2GB For component data sheets, refer to Micron s Web site: www.micron.com 512MB, 1GB, 2GB (x64, DR) 184-Pin DDR SDRAM UDIMM Features
More informationDDR2 SDRAM SODIMM MT8HTF3264HD 256MB MT8HTF6464HD 512MB MT8HTF12864HD 1GB For component data sheets, refer to Micron s Web site: www.micron.
DDR2 SDRAM SODIMM MT8HTF3264HD 256MB MT8HTF6464HD 512MB MT8HTF12864HD 1GB For component data sheets, refer to Micron s Web site: www.micron.com 256MB, 512MB, 1GB (x64, DR): 200-Pin DDR2 SODIMM Features
More informationDDR SDRAM SODIMM. MT9VDDT1672H 128MB 1 MT9VDDT3272H 256MB MT9VDDT6472H 512MB For component data sheets, refer to Micron s Web site: www.micron.
Features DDR SDRAM SODIMM MT9VDDT1672H 128MB 1 MT9VDDT3272H 256MB MT9VDDT6472H 512MB For component data sheets, refer to Micron s Web site: www.micron.com Features 200-pin, small-outline dual in-line memory
More informationFeatures. DDR3 SODIMM Product Specification. Rev. 1.7 Feb. 2016
Features DDR3 functionality and operations supported as defined in the component data sheet 204pin, small-outline dual in-line memory module (SODIMM) Fast data transfer rates: DDR3-1066(PC3-8500) DDR3-1333(PC3-10600)
More informationDDR SDRAM SODIMM MT16VDDF6464H 512MB MT16VDDF12864H 1GB
SODIMM MT16VDDF6464H 512MB MT16VDDF12864H 1GB 512MB, 1GB (x64, DR) 200-Pin DDR SODIMM Features For component data sheets, refer to Micron s Web site: www.micron.com Features 200-pin, small-outline dual
More informationDDR2 SDRAM SODIMM MT16HTF12864H 1GB MT16HTF25664H 2GB
Features DDR2 SDRAM SODIMM MT16HTF12864H 1GB MT16HTF25664H 2GB For component data sheets, refer to Micron s Web site: www.micron.com Features 200-pin, small outline dual in-line memory module (SODIMM)
More informationFeatures. DDR3 Unbuffered DIMM Spec Sheet
Features DDR3 functionality and operations supported as defined in the component data sheet 240-pin, unbuffered dual in-line memory module (UDIMM) Fast data transfer rates: PC3-8500, PC3-10600, PC3-12800
More informationFeatures. DDR SODIMM Product Datasheet. Rev. 1.0 Oct. 2011
Features 200pin, unbuffered small outline dual in-line memory module (SODIMM) Fast data transfer rates: PC-2100, PC-2700, PC3-3200 Single or Dual rank 256MB(32Megx64), 512MB (64Meg x 64), 1GB(128 Meg x
More information-80E PC2-6400 800 800 533 400 12.5 12.5 55-667 PC2-5300 667 533 400 15 15 55-53E PC2-4200 533 400 15 15 55
SDRAM FBDIMM MT18HTF12872FDZ 1GB MT18HTF25672FDZ 2GB 1GB, 2GB (x72, DR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered dual in-line memory module (FBDIMM) Fast data transfer rates: PC2-4200,
More informationDDR2 SDRAM FBDIMM MT36HTF25672F 2GB MT36HTF51272F 4GB. Features. 2GB, 4GB (x72, DR) 240-Pin DDR2 SDRAM FBDIMM. Features
SDRAM FBDIMM MT36HTF25672F 2GB MT36HTF51272F 4GB 2GB, 4GB (x72, DR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered DIMM (FBDIMM) Fast data transfer rates: PC2-4200, PC2-5300, or PC2-6400
More informationDDR2 SDRAM FBDIMM MT36HTF51272FDZ 4GB. Features. 4GB (x72, QR) 240-Pin DDR2 SDRAM FBDIMM. Features. Features (Continued)
SDRAM FBDIMM MT36HTF51272FDZ 4GB 4GB (x72, QR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered DIMM (FBDIMM) Fast data transfer rates: PC2-4200, PC2-5300, or PC2-6400 4GB (512 Meg x 72)
More informationGR2DR4B-EXXX/YYY/LP 1GB & 2GB DDR2 REGISTERED DIMMs (LOW PROFILE)
GENERAL DESCRIPTION The Gigaram is a 128M/256M bit x 72 DDDR2 SDRAM high density JEDEC standard ECC Registered memory module. The Gigaram consists of eighteen CMOS 128MX4 DDR2 for 1GB and thirty-six CMOS
More informationDDR2 SDRAM FBDIMM MT18HTF12872FD 1GB MT18HTF25672FD 2GB. Features. 1GB, 2GB (x72, DR) 240-Pin DDR2 SDRAM FBDIMM. Features
SDRAM FBDIMM MT18HTF12872FD 1GB MT18HTF25672FD 2GB 1GB, 2GB (x72, DR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered dual in-line memory module (FBDIMM) Fast data transfer rates: PC2-4200,
More informationDDR2 SDRAM FBDIMM MT9HTF6472F 512MB MT9HTF12872F 1GB. Features. 512MB, 1GB (x72, SR) 240-Pin DDR2 SDRAM FBDIMM. Features
SDRAM FBDIMM MT9HTF6472F 512MB MT9HTF12872F 1GB 512MB, 1GB (x72, SR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered DIMM (FBDIMM) Fast data transfer rates: PC2-4200, PC2-5300, or PC2-6400
More information-80E PC2-6400 800 800 533 400 12.5 12.5 55-667 PC2-5300 667 533 400 15 15 55-53E PC2-4200 533 400 15 15 55
SDRAM FBDIMM MT36HTF25672FZ 2GB MT36HTF51272FZ 4GB MT36HTF1G72FZ 8GB 2GB, 4GB, 8GB (x72, DR) 240-Pin SDRAM FBDIMM Features Features 240-pin, fully buffered dual in-line memory module (FBDIMM) Fast data
More informationADQYF1A08. DDR2-1066G(CL6) 240-Pin O.C. U-DIMM 1GB (128M x 64-bits)
General Description ADQYF1A08 DDR2-1066G(CL6) 240-Pin O.C. U-DIMM 1GB (128M x 64-bits) The ADATA s ADQYF1A08 is a 128Mx64 bits 1GB DDR2-1066(CL6) SDRAM over clocking memory module, The SPD is programmed
More informationDDR2 SDRAM Mini-RDIMM
Features DDR2 SDRAM Mini-RDIMM MT18HTF25672PKZ 2GB Features 244-pin, mini registered dual in-line memory module (Mini-RDIMM) Fast data transfer rates: PC2-6400, PC2-5300, PC2-4200, or PC2-3200 Supports
More informationNote: Data Rate (MT/s) CL = 3 CL = 4 CL = 5 CL = 6. t RCD (ns) t RP (ns) t RC (ns) t RFC (ns)
TwinDie DDR2 SDRAM MT47H512M4 32 Meg x 4 x 8 Banks x 2 Ranks MT47H256M8 16 Meg x 8 x 8 Banks x 2 Ranks 2Gb: x4, x8 TwinDie DDR2 SDRAM Features Features Uses two 1Gb Micron die Two ranks (includes dual
More informationTechnical Note. Initialization Sequence for DDR SDRAM. Introduction. Initializing DDR SDRAM
TN-46-8: Initialization Sequence for DDR SDRAM Introduction Technical Note Initialization Sequence for DDR SDRAM Introduction The double data rate DDR synchronous dynamic random access memory SDRAM device
More informationTable 1: Address Table
DDR SDRAM DIMM D32PB12C 512MB D32PB1GJ 1GB For the latest data sheet, please visit the Super Talent Electronics web site: www.supertalentmemory.com Features 184-pin, dual in-line memory module (DIMM) Fast
More informationare un-buffered 200-Pin Double Data Rate (DDR) Synchronous DRAM Small Outline Dual In-Line Memory Module (SO-DIMM). All devices
PC2700 200 pin Unbuffered DDR SO-DIMM Based on DDR333 512Mb bit B Die device Features 200-Pin Small Outline Dual In-Line Memory Module (SO-DIMM) Unbuffered DDR SO-DIMM based on 110nm 512M bit die B device,
More informationDDR SDRAM Small-Outline DIMM MT16VDDF6464H 512MB MT16VDDF12864H 1GB
Features DDR SDRAM Small-Outline DIMM MT16VDDF6464H 512MB MT16VDDF12864H 1GB For the latest component data sheet, refer to the Micron's Web site: www.micron.com/products/modules Features 200-pin, small-outline,
More informationDDR3(L) 4GB / 8GB UDIMM
DRAM (512Mb x 8) DDR3(L) 4GB/8GB UDIMM DDR3(L) 4GB / 8GB UDIMM Features Nanya Technology Corp. DDR3(L) 4Gb B-Die JEDEC DDR3(L) Compliant 1-8n Prefetch Architecture - Differential Clock(CK/ ) and Data Strobe(/
More informationDDR SDRAM RDIMM MT36VDDF12872 1GB MT36VDDF25672 2GB
DDR SDRAM RDIMM MT36VDDF12872 1GB MT36VDDF25672 2GB For component data sheets, refer to Micron s Web site: www.micron.com 1GB, 2GB (x72, ECC, DR) 184-Pin DDR SDRAM RDIMM Features Features 184-pin, registered
More informationMemory Module Specifications KVR667D2D4F5/4G. 4GB 512M x 72-Bit PC2-5300 CL5 ECC 240-Pin FBDIMM DESCRIPTION SPECIFICATIONS
Memory Module Specifications KVR667DD4F5/4G 4GB 5M x 7-Bit PC-5300 CL5 ECC 40- FBDIMM DESCRIPTION This document describes s 4GB (5M x 7-bit) PC-5300 CL5 SDRAM (Synchronous DRAM) fully buffered ECC dual
More informationMemory Module Specifications KVR667D2D8F5/2GI. 2GB 256M x 72-Bit PC2-5300 CL5 ECC 240-Pin FBDIMM DESCRIPTION SPECIFICATIONS
Memory Module Specifications KVR667DD8F5/GI GB 56M x 7-Bit PC-5300 CL5 ECC 40- FBDIMM DESCRIPTION This document describes s GB (56M x 7-bit) PC-5300 CL5 (Synchronous DRAM) fully buffered ECC dual rank,
More informationDS1621 Digital Thermometer and Thermostat
Digital Thermometer and Thermostat www.dalsemi.com FEATURES Temperature measurements require no external components Measures temperatures from 55 C to +125 C in 0.5 C increments. Fahrenheit equivalent
More informationTable 1 SDR to DDR Quick Reference
TECHNICAL NOTE TN-6-05 GENERAL DDR SDRAM FUNCTIONALITY INTRODUCTION The migration from single rate synchronous DRAM (SDR) to double rate synchronous DRAM (DDR) memory is upon us. Although there are many
More informationTechnical Note DDR2 Offers New Features and Functionality
Technical Note DDR2 Offers New Features and Functionality TN-47-2 DDR2 Offers New Features/Functionality Introduction Introduction DDR2 SDRAM introduces features and functions that go beyond the DDR SDRAM
More informationDDR2 SDRAM SODIMM MT4HTF1664H 128MB MT4HTF3264H 256MB MT4HTF6464H 512MB
Features DDR2 SDRAM SODIMM MT4HTF1664H 128MB MT4HTF3264H 256MB MT4HTF6464H 512MB For component specifications, refer to Micron s Web site: www.micron.com/products/ddr2sdram Features 200-pin, small outline,
More informationDS1621 Digital Thermometer and Thermostat
www.maxim-ic.com FEATURES Temperature measurements require no external components Measures temperatures from -55 C to +125 C in 0.5 C increments. Fahrenheit equivalent is -67 F to 257 F in 0.9 F increments
More informationData Rate (MT/s) CL = 15 CL = 13 CL = 14
DDR4 SDRAM RDIMM MTA36ASFG7PZ 6GB 6GB (x7, ECC, DR) 88-Pin DDR4 RDIMM Features Features DDR4 functionality and operations supported as defined in the component data sheet 88-pin, registered dual in-line
More informationDDR2 SDRAM Unbuffered DIMM MT9HTF3272A 256MB MT9HTF6472A 512MB MT9HTF12872A 1GB
256MB, 52MB, GB (x72, SR, ECC) 24-Pin DDR2 SDRAM UDIMM Features DDR2 SDRAM Unbuffered DIMM MT9HTF3272A 256MB MT9HTF6472A 52MB MT9HTF2872A GB For the latest data sheet, please refer to the Micron Web site:
More informationAddress Summary Table: 128MB 256MB 512MB 1GB 2GB Module
12MB - WD1SN12X0 256MB - WD1SN256X0 512MB - WD1SN512X0 1GB - WD1SN01GX0 2GB - WD1SN02GS0 (Stacked) Features: 200-pin Unbuffered Non-ECC DDR SDRAM SODIMM for DDR-266, DDR-333, DDR-400 JEDEC standard VDD=2.5V
More informationTechnical Note DDR3 ZQ Calibration
Introduction Technical Note DDR3 ZQ Calibration Introduction For more robust system operation, the DDR3 SDRAM driver design has been enhanced with reduced capacitance, dynamic on-die termination (ODT),
More informationRealSSD Embedded USB Mass Storage Drive MTFDCAE001SAF, MTFDCAE002SAF, MTFDCAE004SAF, MTFDCAE008SAF
RealSSD Embedded USB Mass Storage Drive MTFDCAE001SAF, MTFDCAE002SAF, MTFDCAE004SAF, MTFDCAE008SAF Embedded USB Mass Storage Drive Features Features Micron NAND Flash Interface: Universal Serial Bus (USB)
More informationUser s Manual HOW TO USE DDR SDRAM
User s Manual HOW TO USE DDR SDRAM Document No. E0234E30 (Ver.3.0) Date Published April 2002 (K) Japan URL: http://www.elpida.com Elpida Memory, Inc. 2002 INTRODUCTION This manual is intended for users
More informationV58C2512(804/404/164)SB HIGH PERFORMANCE 512 Mbit DDR SDRAM 4 BANKS X 16Mbit X 8 (804) 4 BANKS X 32Mbit X 4 (404) 4 BANKS X 8Mbit X 16 (164)
V58C2512804/404/164SB HIGH PERFORMAE 512 Mbit DDR SDRAM 4 BANKS X 16Mbit X 8 804 4 BANKS X 32Mbit X 4 404 4 BANKS X 8Mbit X 16 164 5 6 75 DDR400 DDR333 DDR266 Clock Cycle Time t CK2.5 6ns 6ns 7.5ns Clock
More informationDS1721 2-Wire Digital Thermometer and Thermostat
www.dalsemi.com FEATURES Temperature measurements require no external components with ±1 C accuracy Measures temperatures from -55 C to +125 C; Fahrenheit equivalent is -67 F to +257 F Temperature resolution
More informationMobile SDRAM. MT48H16M16LF 4 Meg x 16 x 4 banks MT48H8M32LF 2 Meg x 32 x 4 banks
Features Mobile SDRAM MT48H6M6LF 4 Meg x 6 x 4 banks MT48H8M32LF 2 Meg x 32 x 4 banks Features Fully synchronous; all signals registered on positive edge of system clock V DD /V D =.7.95V Internal, pipelined
More informationDS1307ZN. 64 x 8 Serial Real-Time Clock
DS137 64 x 8 Serial Real-Time Clock www.maxim-ic.com FEATURES Real-time clock (RTC) counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid
More informationDual DIMM DDR2 and DDR3 SDRAM Interface Design Guidelines
Dual DIMM DDR2 and DDR3 SDRAM Interface Design Guidelines May 2009 AN-444-1.1 This application note describes guidelines for implementing dual unbuffered DIMM DDR2 and DDR3 SDRAM interfaces. This application
More informationTechnical Note FBDIMM Channel Utilization (Bandwidth and Power)
Introduction Technical Note Channel Utilization (Bandwidth and Power) Introduction Memory architectures are shifting from stub bus technology to high-speed linking. The traditional stub bus works well
More informationParity 3. Data Rate (MT/s) CL = 6 CL = 5 CL = 4 CL = 3-80E PC2-6400 800 533 12.5 12.5 55
Features DDR2 SDRAM Registered DIMM (RDIMM) MT18HTF6472 512MB MT18HTF12872(P) 1GB MT18HTF25672(P) 2GB For component data sheets, refer to Micron's Web site: www.micron.com Features 240-pin, registered
More informationDDR2 SDRAM Registered MiniDIMM MT9HTF3272(P)K 256MB MT9HTF6472(P)K 512MB MT9HTF12872(P)K 1GB
Features DDR2 SDRAM Registered MiniDIMM MT9HTF3272(P)K 256MB MT9HTF6472(P)K 512MB MT9HTF172(P)K 1GB For component specifications, refer to Micron s Web site: www.micron.com/products/dram/ddr2 Features
More informationFeatures. Instruction. Decoder Control Logic, And Clock Generators. Address Compare amd Write Enable. Protect Register V PP.
February 1999 NM9366 (MICROWIRE Bus Interface) 4096-Bit Serial EEPROM General Description The NM9366 devices are 4096 bits of CMOS non-volatile electrically erasable memory divided into 256 16-bit registers.
More informationTechnical Note. DDR3 Point-to-Point Design Support. Introduction. TN-41-13: DDR3 Point-to-Point Design Support. Introduction
Technical Note DDR3 Point-to-Point Design Support TN-41-13: DDR3 Point-to-Point Design Support Introduction Introduction Point-to-point design layouts have unique memory requirements, and selecting the
More informationADATA Technology Corp. DDR3-1600(CL11) 240-Pin VLP ECC U-DIMM 4GB (512M x 72-bit)
ADATA Technology Corp. Memory Module Data Sheet DDR3-1600(CL11) 240-Pin VLP ECC U-DIMM 4GB (512M x 72-bit) Version 0.1 Document Number : R11-0861 APPROVAL ISSUE Evan Sheu 2012/04/20 Masako Yang 2012/04/20
More informationFM75 Low-Voltage Two-Wire Digital Temperature Sensor with Thermal Alarm
Low-Voltage Two-Wire Digital Temperature Sensor with Thermal Alarm Features User Configurable to 9, 10, 11 or 12-bit Resolution Precision Calibrated to ±1 C, 0 C to 100 C Typical Temperature Range: -40
More informationThinkServer PC2-5300 DDR2 FBDIMM and PC2-6400 DDR2 SDRAM Memory options boost overall performance of ThinkServer solutions
, dated September 30, 2008 ThinkServer PC2-5300 DDR2 FBDIMM and PC2-6400 DDR2 SDRAM Memory options boost overall performance of ThinkServer solutions Table of contents 2 Key prerequisites 2 Product number
More informationNTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
More informationWhite Paper Utilizing Leveling Techniques in DDR3 SDRAM Memory Interfaces
White Paper Introduction The DDR3 SDRAM memory architectures support higher bandwidths with bus rates of 600 Mbps to 1.6 Gbps (300 to 800 MHz), 1.5V operation for lower power, and higher densities of 2
More information3.11.5.5 DDR2 Specific SDRAM Functions
JEDEC Standard No. 2-C Page..5.5..5.5 DDR2 Specific SDRAM Functions DDR2 SDRAM EMRS2 and EMRS For DDR2 SDRAMs, both bits BA and BA must be decoded for Mode/Extended Mode Register Set commands. Users must
More informationPACKAGE OUTLINE DALLAS DS2434 DS2434 GND. PR 35 PACKAGE See Mech. Drawings Section
PRELIMINARY DS2434 Battery Identification Chip FEATURES Provides unique ID number to battery packs PACKAGE OUTLINE Eliminates thermistors by sensing battery temperature on chip DALLAS DS2434 1 2 3 256
More informationA N. O N Output/Input-output connection
Memory Types Two basic types: ROM: Read-only memory RAM: Read-Write memory Four commonly used memories: ROM Flash, EEPROM Static RAM (SRAM) Dynamic RAM (DRAM), SDRAM, RAMBUS, DDR RAM Generic pin configuration:
More informationHT1632C 32 8 &24 16 LED Driver
328 &216 LED Driver Features Operating voltage: 2.V~5.5V Multiple LED display 32 ROW /8 COM and 2 ROW & 16 COM Integrated display RAM select 32 ROW & 8 COM for 6 display RAM, or select 2 ROW & 16 COM for
More informationDDR subsystem: Enhancing System Reliability and Yield
DDR subsystem: Enhancing System Reliability and Yield Agenda Evolution of DDR SDRAM standards What is the variation problem? How DRAM standards tackle system variability What problems have been adequately
More informationDM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
More informationTRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
More information2-wire Serial EEPROM AT24C512
Features Low-voltage and Standard-voltage Operation 5.0 (V CC = 4.5V to 5.5V). (V CC =.V to 5.5V). (V CC =.V to.v) Internally Organized 5,5 x -wire Serial Interface Schmitt Triggers, Filtered Inputs for
More information7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18
18 CHANNELS LED DRIVER GENERAL DESCRIPTION IS31FL3218 is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be
More informationDDR3 DIMM Slot Interposer
DDR3 DIMM Slot Interposer DDR3-1867 Digital Validation High Speed DDR3 Digital Validation Passive 240-pin DIMM Slot Interposer Custom Designed for Agilent Logic Analyzers Compatible with Agilent Software
More informationLC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function
Ordering number : A2053 CMOS LSI Linear Vibrator Driver IC http://onsemi.com Overview is a Linear Vibrator Driver IC for a haptics and a vibrator installed in mobile equipments. The best feature is it
More information1-Mbit (128K x 8) Static RAM
1-Mbit (128K x 8) Static RAM Features Pin- and function-compatible with CY7C109B/CY7C1009B High speed t AA = 10 ns Low active power I CC = 80 ma @ 10 ns Low CMOS standby power I SB2 = 3 ma 2.0V Data Retention
More informationICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock
More information1 TO 4 CLOCK BUFFER ICS551. Description. Features. Block Diagram DATASHEET
DATASHEET 1 TO 4 CLOCK BUFFER ICS551 Description The ICS551 is a low cost, high-speed single input to four output clock buffer. Part of IDT s ClockBlocks TM family, this is our lowest cost, small clock
More informationTS555. Low-power single CMOS timer. Description. Features. The TS555 is a single CMOS timer with very low consumption:
Low-power single CMOS timer Description Datasheet - production data The TS555 is a single CMOS timer with very low consumption: Features SO8 (plastic micropackage) Pin connections (top view) (I cc(typ)
More informationHDMM01 V1.0. Dual-axis Magnetic Sensor Module With I 2 C Interface FEATURES. Signal Path X
Dual-axis Magnetic Sensor Module With I 2 C Interface FEATURES Low power consumption: typically 0.4mA@3V with 50 measurements per second Power up/down function available through I 2 C interface SET/RESET
More informationDDR SDRAM UNBUFFERED DIMM
DDR SDRAM UNBUFFERED DIMM Features 84-pin, dual in-line memory module (DIMM) Fast data transfer rates: PC2 or PC27 Utilizes 266 MT/s and 333 MT/s DDR SDRAM components 256MB (32 Meg x 64), 52MB (64 Meg
More informationDDR4 Memory Technology on HP Z Workstations
Technical white paper DDR4 Memory Technology on HP Z Workstations DDR4 is the latest memory technology available for main memory on mobile, desktops, workstations, and server computers. DDR stands for
More informationFeatures INSTRUCTION DECODER CONTROL LOGIC AND CLOCK GENERATORS COMPARATOR AND WRITE ENABLE EEPROM ARRAY READ/WRITE AMPS 16
July 2000 FM9346 (MICROWIRE Bus Interface) 1024- Serial EEPROM General Description FM9346 is a 1024-bit CMOS non-volatile EEPROM organized as 64 x 16-bit array. This device features MICROWIRE interface
More informationMR25H10. RoHS FEATURES INTRODUCTION
FEATURES No write delays Unlimited write endurance Data retention greater than 20 years Automatic data protection on power loss Block write protection Fast, simple SPI interface with up to 40 MHz clock
More informationStandard: 64M x 8 (9 components)
256MB - WD2RE256X09 512MB - WD2RE512X09 1GB - WD2RE01GX09 2GB - WD2RE02GH09 (Stacked, Preliminary*) DDR2-400, 533,667 One Rank, x Registered SDRAM DIMM Pb-free Features: 240-pin Registered ECC DDR2 SDRAM
More informationMMC314xMR. Ultra Small 3-axis Magnetic Sensor, With I 2 C Interface. Signal Path X. Signal Path Y. Signal Path Z FEATURES
Ultra Small 3-axis Magnetic Sensor, With I 2 C Interface MMC314xMR FEATURES Full integration of 3-axis magnetic sensors and electronics circuits resulting in less external components needed Small Low profile
More informationDS1225Y 64k Nonvolatile SRAM
DS1225Y 64k Nonvolatile SRAM www.maxim-ic.com FEATURES years minimum data retention in the absence of external power Data is automatically protected during power loss Directly replaces 2k x 8 volatile
More informationDS1220Y 16k Nonvolatile SRAM
19-5579; Rev 10/10 NOT RECOENDED FOR NEW DESIGNS 16k Nonvolatile SRAM www.maxim-ic.com FEATURES 10 years minimum data retention in the absence of external power Data is automatically protected during power
More informationDDR3L SDRAM. MT41K512M4 64 Meg x 4 x 8 banks MT41K256M8 32 Meg x 8 x 8 banks MT41K128M16 16 Meg x 16 x 8 banks. Description
DDR3L SDRAM MT41K512M4 64 Meg x 4 x 8 banks MT41K256M8 32 Meg x 8 x 8 banks MT41K128M16 16 Meg x 16 x 8 banks 2Gb: x4, x8, x16 DDR3L SDRAM Description Description The 1.35V DDR3L SDRAM device is a low-voltage
More information256K (32K x 8) Static RAM
256K (32K x 8) Static RAM Features High speed: 55 ns and 70 ns Voltage range: 4.5V 5.5V operation Low active power (70 ns, LL version) 275 mw (max.) Low standby power (70 ns, LL version) 28 µw (max.) Easy
More informationComputer Architecture
Computer Architecture Random Access Memory Technologies 2015. április 2. Budapest Gábor Horváth associate professor BUTE Dept. Of Networked Systems and Services ghorvath@hit.bme.hu 2 Storing data Possible
More information2GB DDR2 SDRAM SO-DIMM
2GB DDR2 SDRAM SO-DIMM 200 Pin SO-DIMM SEN02G64C4BF2SA-25R 2GB PC2-5300 in FBGA Technoloy RoHS compliant Options: Frequency / Latency Marking DDR2 800 MT/s CL6-25 DDR2 667 MT/s CL5-30 DDR2 533 MT/s CL4-37
More informationDQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 WE# RAS# A0 A1 A2 A3
MEG x 6 MT4CM6C3, MT4LCM6C3 For the latest data sheet revisions, please refer to the Micron Web site: www.micron.com/datasheets FEATURES JEDEC- and industry-standard x6 timing, functions, pinouts, and
More informationTechnical Note Design Guide for Two DDR3-1066 UDIMM Systems
Introduction Technical Note Design Guide for Two DDR3-1066 UDIMM Systems Introduction DDR3 memory systems are very similar to DDR2 memory systems. One noteworthy difference is the fly-by architecture used
More informationFeatures. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND
DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique
More informationICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET
DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for
More informationICS379. Quad PLL with VCXO Quick Turn Clock. Description. Features. Block Diagram
Quad PLL with VCXO Quick Turn Clock Description The ICS379 QTClock TM generates up to 9 high quality, high frequency clock outputs including a reference from a low frequency pullable crystal. It is designed
More informationWhite Paper David Hibler Jr Platform Solutions Engineer Intel Corporation. Considerations for designing an Embedded IA System with DDR3 ECC SO-DIMMs
White Paper David Hibler Jr Platform Solutions Engineer Intel Corporation Considerations for designing an Embedded IA System with DDR3 ECC SO-DIMMs September 2012 326491 Executive Summary What are ECC
More informationFairchild Solutions for 133MHz Buffered Memory Modules
AN-5009 Fairchild Semiconductor Application Note April 1999 Revised December 2000 Fairchild Solutions for 133MHz Buffered Memory Modules Fairchild Semiconductor provides several products that are compatible
More information