Unit Data - RCA 051 RATED IN ACCORDANCE TO AHRI STANDARD

Transcription

1 RATED IN ACCORDANCE TO AHRI STANDARD

2 Data - RCA 051 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 46,500 Electric Power (W) 3,550 Energy Efficiency Ratio (EER) 13.1 Integrated Energy Efficiency Ratio (IEER) 14.4 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) 230/1/ /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 1-1/2 FLA (ea) Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 4,000 Diameter (in)-pitch (deg) Quantity 2 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 15.4 Rows - Fins per Inch 4-12 Suction Line (in OD) 3 / 4 Liquid Line (in OD) 1 / 2 Optional Hot Gas Bypass (in OD) 3 Optional Hot Gas Reheat (in OD) 3 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 565 Shipping Weight (lbs) 615 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 39,000 37,400 36,000 Electric Power (W) 3,370 3,560 3,765 Total Capacity (Btu/h) 42,500 41,000 39,500 Electric Power (W) 3,380 3,575 3,780 Total Capacity (Btu/h) 46,500 44,500 43,000 Electric Power (W) 3,400 3,590 3,800 Total Capacity (Btu/h) 50,500 48,500 47,000 Electric Power (W) 3,420 3,615 3,815 Total Capacity (Btu/h) 54,500 52,500 50,500 Electric Power (W) 3,440 3,635 3,840 2

3 Data - RCA 061 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 55,600 Electric Power (W) 4,244 Energy Efficiency Ratio (EER) 13.1 Integrated Energy Efficiency Ratio (IEER) 14.2 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) 230/1/ /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 1-1/2 FLA (ea) Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 4,000 Diameter (in)-pitch (deg) Quantity 2 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 15.4 Rows - Fins per Inch 4-12 Suction Line (in OD) 7 Liquid Line (in OD) 1 / 2 Optional Hot Gas Bypass (in OD) 3 Optional Hot Gas Reheat (in OD) 3 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 590 Shipping Weight (lbs) 640 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 45,000 43,000 42,000 Electric Power (W) 4,250 4,485 4,775 Total Capacity (Btu/h) 53,500 47,000 46,000 Electric Power (W) 4,355 4,530 4,785 Total Capacity (Btu/h) 55,000 51,000 50,000 Electric Power (W) 4,380 4,615 4,865 Total Capacity (Btu/h) 57,000 56,000 54,000 Electric Power (W) 4,435 4,675 4,930 Total Capacity (Btu/h) 62,000 60,000 58,000 Electric Power (W) 4,530 4,770 5,035 3

4 Data - RCA 071 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 74,500 Electric Power (W) 6,422 Energy Efficiency Ratio (EER) 11.6 Integrated Energy Efficiency Ratio (IEER) 12.7 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 1-1/2 FLA (ea) Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 4,000 Diameter (in)-pitch (deg) Quantity 2 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 15.4 Rows - Fins per Inch 4-12 Suction Line (in OD) 7 Liquid Line (in OD) 1 / 2 Optional Hot Gas Bypass (in OD) 3 Optional Hot Gas Reheat (in OD) 1 / 2 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 610 Shipping Weight (lbs) 660 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 60,200 58,000 56,000 Electric Power (W) 6,285 6,585 6,905 Total Capacity (Btu/h) 66,000 63,000 61,000 Electric Power (W) 6,415 6,720 7,045 Total Capacity (Btu/h) 71,000 69,000 66,000 Electric Power (W) 6,600 6,860 7,245 Total Capacity (Btu/h) 77,000 74,000 71,000 Electric Power (W) 6,695 7,005 7,330 Total Capacity (Btu/h) 82,000 80,000 77,000 Electric Power (W) 6,840 7,150 7,480 4

5 Data - RCA 101 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 107,500 Electric Power (W) 9,430 Energy Efficiency Ratio (EER) 11.4 Integrated Energy Efficiency Ratio (IEER) 12.8 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 1-1 FLA (ea) Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 6,200 Diameter (in)-pitch (deg) Quantity 3 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 23.1 Rows - Fins per Inch 4-12 Suction Line (in OD) 1 1 Liquid Line (in OD) 5 Optional Hot Gas Bypass (in OD) 1 / 2 Optional Hot Gas Reheat (in OD) 5 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 825 Shipping Weight (lbs) 900 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) 35.0T Ambient Temperature ( F) Total Capacity (Btu/h) 89,000 86,000 83,000 Electric Power (W) 8,910 9,435 9,840 Total Capacity (Btu/h) 97,000 94,000 90,000 Electric Power (W) 9,130 9,515 10,075 Total Capacity (Btu/h) 105, ,000 98,000 Electric Power (W) 9,300 9,750 10,225 Total Capacity (Btu/h) 113, , ,000 Electric Power (W) 9,465 9,935 10,395 Total Capacity (Btu/h) 122, , ,000 Electric Power (W) 9,660 10,110 10,680 5

6 Data - RCA 141 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 137,100 Electric Power (W) 12,578 Energy Efficiency Ratio (EER) 10.9 Integrated Energy Efficiency Ratio (IEER) 12.2 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 1-1 FLA (ea) Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 6,200 Diameter (in)-pitch (deg) Quantity 3 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 23.1 Rows - Fins per Inch 4-12 Suction Line (in OD) 1 3 Liquid Line (in OD) 5 Optional Hot Gas Bypass (in OD) 1 / 2 Optional Hot Gas Reheat (in OD) 5 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 900 Shipping Weight (lbs) 975 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 113, , ,000 Electric Power (W) 12,000 12,470 13,085 Total Capacity (Btu/h) 124, , ,000 Electric Power (W) 12,150 12,845 13,340 Total Capacity (Btu/h) 133, , ,000 Electric Power (W) 12,535 13,005 13,615 Total Capacity (Btu/h) 143, , ,000 Electric Power (W) 12,710 13,295 13,905 Total Capacity (Btu/h) 153, , ,000 Electric Power (W) 13,070 13,710 14,210 6

7 Data - RCA 171 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 165,900 Electric Power (W) 13,598 Energy Efficiency Ratio (EER) 12.2 Integrated Energy Efficiency Ratio (IEER) 13.6 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 2-1 FLA (ea) 3.4 / / /2.0 Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 12,400 Diameter (in)-pitch (deg) Quantity 4 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 30.8 Rows - Fins per Inch 4-12 Suction Line (in OD) 1 3 Liquid Line (in OD) 7 Optional Hot Gas Bypass (in OD) 5 Optional Hot Gas Reheat (in OD) 5 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 1,250 Shipping Weight (lbs) 1,345 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 144, , ,000 Electric Power (W) 12,265 12,865 13,540 Total Capacity (Btu/h) 157, , ,000 Electric Power (W) 12,400 13,015 13,670 Total Capacity (Btu/h) 170, , ,000 Electric Power (W) 12,560 13,170 13,820 Total Capacity (Btu/h) 183, , ,000 Electric Power (W) 12,775 13,390 14,015 Total Capacity (Btu/h) 198, , ,000 Electric Power (W) 12,980 13,560 14,180 7

8 Data - RCA 201 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 192,000 Electric Power (W) 16,271 Energy Efficiency Ratio (EER) 11.8 Integrated Energy Efficiency Ratio (IEER) 13.2 Qty-Nominal Tons-Type Capacity Reduction Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 2-1 FLA (ea) 3.4 / / /2.0 Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 12,400 Diameter (in)-pitch (deg) Quantity 4 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 30.8 Rows - Fins per Inch 4-12 Suction Line (in OD) 1 3 Liquid Line (in OD) 7 Optional Hot Gas Bypass (in OD) 5 Optional Hot Gas Reheat (in OD) 3 / 4 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 1,300 Shipping Weight (lbs) 1,400 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 167, , ,000 Electric Power (W) 14,500 15,230 16,020 Total Capacity (Btu/h) 182, , ,000 Electric Power (W) 14,740 15,415 16,175 Total Capacity (Btu/h) 197, , ,000 Electric Power (W) 14,955 15,665 16,355 Total Capacity (Btu/h) 213, , ,000 Electric Power (W) 15,170 15,865 16,635 Total Capacity (Btu/h) 230, , ,000 Electric Power (W) 15,390 16,100 16,850 8

9 Data - RCA 271 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 241,300 Electric Power (W) 22,343 Energy Efficiency Ratio (EER) 10.8 Integrated Energy Efficiency Ratio (IEER) 12.4 Qty-Nominal Tons-Type Capacity Reduction Tandem Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 2-1 FLA (ea) 3.4 / / /2.0 Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 12,400 Diameter (in)-pitch (deg) Quantity 4 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 30.8 Rows - Fins per Inch 4-12 Suction Line (in OD) 1 5 Liquid Line (in OD) 7 Optional Hot Gas Bypass (in OD) 5 Optional Hot Gas Reheat (in OD) 7 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 1,400 Shipping Weight (lbs) 1,500 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 213, , ,000 Electric Power (W) 19,315 20,310 21,360 Total Capacity (Btu/h) 232, , ,000 Electric Power (W) 19,590 20,570 21,620 Total Capacity (Btu/h) 252, , ,000 Electric Power (W) 20,020 21,000 21,895 Total Capacity (Btu/h) 273, , ,000 Electric Power (W) 20,360 21,330 22,365 Total Capacity (Btu/h) 294, , ,000 Electric Power (W) 20,720 21,700 22,730 9

10 Data - RCA 361 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 288,600 Electric Power (W) 24,879 Energy Efficiency Ratio (EER) 11.6 Integrated Energy Efficiency Ratio (IEER) 12.8 Qty-Nominal Tons-Type Capacity Reduction Tandem Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 4-1 FLA (ea) 3.4 / 3.4 / 5.4 / / 1.7 / 2.7 / / 2.0 / 2.0 / 2.0 Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 28,000 Diameter (in)-pitch (deg) Quantity 4 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 70.0 Rows - Fins per Inch 2-14 Suction Line (in OD) 1 5 Liquid Line (in OD) 1 1 Optional Hot Gas Bypass (in OD) 7 Optional Hot Gas Reheat (in OD) 7 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 1,700 Shipping Weight (lbs) 1,820 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 240, , ,000 Electric Power (W) 23,635 24,700 26,050 Total Capacity (Btu/h) 260, , ,000 Electric Power (W) 24,090 25,140 26,135 Total Capacity (Btu/h) 283, , ,000 Electric Power (W) 24,410 25,485 26,620 Total Capacity (Btu/h) 306, , ,000 Electric Power (W) 24,890 26,010 27,190 Total Capacity (Btu/h) 332, , ,000 Electric Power (W) 25,085 26,360 27,570 10

11 Data - RCA 421 RATED IN ACCORDANCE TO AHRI STANDARD Performance Data Electrical Data Mechanical Data Net Cooling Compressor(s) Condenser Fan Motor(s) Condenser Fan(s) Condenser Coil(s) Refrigerant Connection(s) Cabinet Refrigerant - R410A Weights Total Capacity (Btu/h) 369,700 Electric Power (W) 33,609 Energy Efficiency Ratio (EER) 11.0 Integrated Energy Efficiency Ratio (IEER) 12.2 Qty-Nominal Tons-Type Capacity Reduction Tandem Scroll 0/50/100 (HGBP) or 0/ (Digital) Electric Supply (V/Phase/Hz) /3/60 460/3/60 575/3/60 Run Load Amps (RLA) Locked Rotor Amps (LRA) Qty - Horsepower (HP) 4-1 FLA (ea) 3.4 / 3.4 / 5.4 / / 1.7 / 2.7 / / 2.0 / 2.0 / 2.0 Type Minimum Circuit Ampacity Max. Time Delay Fuse or HACR Breaker PSC Airflow (CFM) 28,000 Diameter (in)-pitch (deg) Quantity 4 Tube Material - Fin Material Copper - Aluminum Face Area (sq. ft) 70.0 Rows - Fins per Inch 2-14 Suction Line (in OD) 2 1 Liquid Line (in OD) 1 1 Optional Hot Gas Bypass (in OD) 7 Optional Hot Gas Reheat (in OD) 7 Sheet Metal Finish G90 Galvanized Polyester Coating Top Pan Thickness (ga) 16 Sides and Panels Thickness (ga) 18 Bottom Pan Thickness (ga) 16 Charge based on 25' line set (lbs per circuit) Weight (lbs) 1,770 Shipping Weight (lbs) 1,900 NOTES: 1. Refrigerant connections are actual connection sizes at unit. For line sizing, see Reference Information tables on pages Cooling Saturated Suction Temperature ( F) Ambient Temperature ( F) Total Capacity (Btu/h) 306, , ,000 Electric Power (W) 31,685 33,335 34,495 Total Capacity (Btu/h) 334, , ,000 Electric Power (W) 32,350 33,705 35,465 Total Capacity (Btu/h) 359, , ,000 Electric Power (W) 33,355 34,440 35,885 Total Capacity (Btu/h) 391, , ,000 Electric Power (W) 33,900 35,550 36,695 Total Capacity (Btu/h) 421, , ,000 Electric Power (W) 34,815 36,165 37,925 11

12 Typical Wiring Diagram Condensing Disconnect L1 L2 L3 Condensing Control Panel R Y 24VAC, Switched Compressor G Supply Fan C 24VAC, Common, Unswitched NOTES: 1. All electrical wiring and connections, including electrical grounding must comply with: a. ed States: Refer to NFPA 70- latest revision, National Electrical Code, and local ordinances. b. Canada: Refer to CSA C22.1, Part 1- latest revision, Canadian Electrical Code and local ordinances. 2. Class 1 circuit 3. Condensing unit disconnect is not provided with condensing unit as standard. Disconnect may be obtained from factory as optional equipment or provided by others. 4. Terminal Y2 is only used on dual-circuit units. Typical Split System Installation Disconnect Interconnecting Control Wiring Liquid Line Suction Line Sleeve And Flashing Condensing Optional Hot Gas Reheat Optional Hot Gas Bypass Disconnect Outside Air or Return Air Air Handler Supply Air Trap And Drain Connection NOTES: 1. Condensing unit disconnect is not provided with condensing unit as standard. Disconnect may be obtained from factory as optional equipment or provided by others. 2. Air handler, air handler disconnect, interconnecting control wiring, all refrigerant line piping and sleeve/flashing materials are by others. 3. Suction, hot gas bypass, and hot gas reheat lines should be insulated with 5/8 minimum thickness closed cell foam insulation. Liquid line exposed to high ambient temperatures should be insulated 5/8 minimum thickness closed cell foam insulation. 12

13 Typical Installation with on Bottom Optional Hot Gas Reheat Condensate Trap And Pipe Loop To Top Of Coil Suction Liquid Optional Hot Gas Bypass Slope Down Towards Condensing NOTES: 1. To prevent oil migration, lines should slope downwards towards the condensing unit and should slope downward away from the air handler. 2. Vertical risers greater than 4' in height should have a P trap installed at the base of the air handler. 3. Vertical risers greater than 20' in height require an extra P trap for every 20' of riser height in addition to the P trap installed at the base of the air handler. The trap is inverted at the top of the vertical rise. Typical Installation with Condensing on Top Optional Hot Gas Bypass Suction Liquid Optional Hot Gas Reheat Condensate Trap And Pipe Slope Down From Air Handler NOTES: 1. To prevent oil migration, lines should slope downwards towards the condensing unit and should slope downward away from the air handler. 2. Vertical risers greater than 4' in height should have a P trap installed at the base of the air handler. 3. Vertical risers greater than 20' in height require an extra P trap for every 20' of riser height in addition to the P trap installed at the base of the air handler. The trap is inverted at the top of the vertical rise. 13

14 Dimensions - RCA 051/061/071 A TOP VIEW MULTI-DIMENSIONAL VIEW COIL B COIL CONTROLS ELECTRICAL C D Ø E SUCTION LIQUID OPTIONAL HOT GAS REHEAT OPTIONAL HOT GAS BYPASS COMPRESSOR F Q G L M N P H A K R SIDE VIEW BACK VIEW A B C D E F G H K L M N P Q R (in)

15 Dimensions - RCA 101/141 A TOP VIEW MULTI-DIMENSIONAL VIEW COIL COIL COIL B ELECTRICAL C D ØE SUCTION LIQUID OPTIONAL HOT GAS BYPASS OPTIONAL HOT GAS REHEAT COMPRESSOR F G P N M A L K A H J Q SIDE VIEW FRONT VIEW A B C D E F G H J K L M N P Q (in)

16 Dimensions - RCA 171/201/271 TOP VIEW MULTI-DIMENSIONAL VIEW COIL A LIQUID COMPRESSOR ELECTRICAL SUCTION OPTIONAL HOT GAS REHEAT OPTIONAL HOT GAS BYPASS B J H C G F E D SIDE VIEW A BACK VIEW A B C D E F G H J (in)

17 Dimensions - RCA 361/421 TOP VIEW MULTI-DIMENSIONAL VIEW COIL A COMPRESSOR ELECTRICAL SUCTION OPTIONAL HOT GAS REHEAT OPTIONAL HOT GAS BYPASS LIQUID J B C G F E H D SIDE VIEW A BACK VIEW A B C D E F G H J (in)

18 Reference Information Ambient Temperature Correction Factors Ambient Temperature ( F) Total Capacity (Btu/h) Sensible Capacity (Btu/h) Electric Power (W) Recommended Refrigerant Line Sizes- Air Handler Below Condensing (in OD) 0-25 ft. Equivalent Length ft. Equivalent Length Nominal Capacity (Btu/h) Hot Gas Hot Gas Hot Gas Hot Gas Suction Liquid Suction Liquid Reheat Bypass Reheat Bypass 36,000 5/8, 5/8 3/8 1/2 3/8 3/4, 3/4 1/2 1/2 3/8 48,000 3/4, 3/4 3/8 5/8 3/8 3/4, 3/4 1/2 5/8 3/8 60,000 3/4, 3/4 1/2 5/8 1/2 7/8, 7/8 1/2 5/8 1/2 72,000 7/8, 7/8 1/2 5/8 1/2 7/8, 7/8 1/2 5/8 1/2 84,000 7/8, 7/8 1/2 3/4 1/2 1-1/8, 7/8 1/2 3/4 1/2 96,000 7/8, 7/8 1/2 3/4 1/2 1-1/8, 7/8 1/2 3/4 1/2 120, /8, 7/8 1/2 3/4 5/8 1-3/8, 1-1/8 5/8 3/4 5/8 150, /8, 1-1/8 5/8 7/8 5/8 1-3/8, 1-1/8 5/8 7/8 5/8 180, /8, 1-1/8 5/8 7/8 5/8 1-3/8, 1-3/8 5/8 7/8 5/8 220, /8, 1-3/8 5/8 1-1/8 3/4 1-3/8, 1-3/8 3/4 1-1/8 3/4 250, /8, 1-3/8 5/8 1-1/8 3/4 1-3/8, 1-3/8 3/4 1-1/8 3/4 300, /8, 1-3/8 3/4 1-1/8 3/4 1-5/8, 1-3/8 3/4 1-1/8 3/4 360, /8, 1-5/8 3/4 1-1/8 7/8 1-5/8, 1-5/8 7/8 1-1/8 7/8 420, /8, 1-5/8 3/4 1-3/8 7/8 1-5/8, 1-5/8 7/8 1-3/8 7/ ft. Equivalent Length ft. Equivalent Length Nominal Capacity (Btu/h) Hot Gas Hot Gas Hot Gas Hot Gas Suction Liquid Suction Liquid Reheat Bypass Reheat Bypass 36,000 7/8, 5/8 1/2 5/8 1/2 7/8, 3/4 1/2 5/8 N/A 48,000 7/8, 3/4 1/2 3/4 1/2 7/8, 7/8 1/2 5/8 N/A 60, /8, 3/4 1/2 3/4 1/2 7/8, 7/8 1/2 3/4 N/A 72, /8, 7/8 1/2 3/4 5/8 1-1/8, 7/8 5/8 3/4 N/A 84, /8, 7/8 5/8 7/8 5/8 1-1/8, 7/8 5/8 3/4 N/A 96, /8, 1-1/8 5/8 7/8 5/8 1-1/8, 1-1/8 5/8 3/4 N/A 120, /8, 1-1/8 5/8 7/8 3/4 1-1/8, 1-1/8 5/8 7/8 N/A 150, /8, 1-1/8 5/8 1-1/8 3/4 1-3/8, 1-1/8 3/4 7/8 N/A 180, /8, 1-3/8 3/4 1-1/8 3/4 1-3/8, 1-3/8 3/4 1-1/8 N/A 220, /8, 1-3/8 3/4 1-1/8 7/8 1-5/8, 1-3/8 3/4 1-3/8 N/A 250, /8, 1-3/8 3/4 1-3/8 7/8 1-5/8, 1-3/8 7/8 1-3/8 N/A 300, /8, 1-3/8 7/8 1-3/8 1-1/8 2-1/8, 1-5/8 7/8 1-3/8 N/A 360, /8, 1-5/8 7/8 1-3/8 1-1/8 2-1/8, 1-5/8 1-1/8 1-3/8 N/A 420, /8, 1-5/8 1-1/8 1-3/8 1-1/8 2-1/8, 1-5/8 1-1/8 1-5/8 N/A NOTES: 1. Line sizes are calculated assuming single scroll compressors in Models and tandem scroll compressors in Models Contact the factory for any other compressor configuration. 2. All piping must comply with standard refrigeration piping techniques. Consult the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Handbook-Refrigeration. 3. Suction, hot gas bypass and hot gas reheat lines should be insulated with a 5/8 minimum thickness closed cell foam insulation. Liquid line exposed to high ambient temperatures should be insulated with a 5/8 minimum thickness closed cell foam insulation. 4. First suction line diameter size is for horizontal runs. Second suction line diameter size is for vertical risers. 5. Maximum suction line vertical lift is 60. Riser-sized traps are required for every 20 of vertical riser starting at the lowest point. 6. If ordered, hot gas reheat and hot gas bypass require only one line. 7. Standard hot gas bypass is not recommended for use with greater than 75 of equivalent line length. Internal hot gas bypass should be used as an alternative. 8. Contact factory for applications with digital scroll compressors. 9. Contact factory for layouts requiring more than 75 of actual line length. 18

19 Reference Information Recommended Refrigerant Line Sizes- Air Handler Level with or Above Condensing (in OD) 0-25 ft. Equivalent Length ft. Equivalent Length Nominal Capacity (Btu/h) Hot Gas Hot Gas Hot Gas Hot Gas Suction Liquid Suction Liquid Reheat Bypass Reheat Bypass 36,000 5/8 3/8 1/2 3/8 3/4 3/8 1/2 3/8 48,000 3/4 3/8 5/8 3/8 7/8 1/2 5/8 3/8 60,000 3/4 1/2 5/8 1/2 7/8 1/2 5/8 1/2 72,000 7/8 1/2 5/8 1/2 1-1/8 1/2 5/8 1/2 84,000 7/8 1/2 3/4 1/2 1-1/8 5/8 3/4 1/2 96,000 7/8 1/2 3/4 1/2 1-1/8 5/8 3/4 1/2 120, /8 5/8 3/4 5/8 1-1/8 5/8 3/4 5/8 150, /8 5/8 7/8 5/8 1-3/8 3/4 7/8 5/8 180, /8 3/4 7/8 5/8 1-3/8 3/4 7/8 5/8 220, /8 3/4 1-1/8 3/4 1-3/8 7/8 1-1/8 3/4 250, /8 3/4 1-1/8 3/4 1-3/8 7/8 1-1/8 3/4 300, /8 7/8 1-1/8 3/4 1-5/8 7/8 1-1/8 3/4 360, /8 7/8 1-1/8 7/8 1-5/8 7/8 1-1/8 7/8 420, /8 1-1/8 1-3/8 7/8 1-5/8 1-1/8 1-3/8 7/ ft. Equivalent Length ft. Equivalent Length Nominal Capacity (Btu/h) Hot Gas Hot Gas Hot Gas Hot Gas Suction Liquid Suction Liquid Reheat Bypass Reheat Bypass 36,000 3/4 3/8 5/8 1/2 3/4 1/2 5/8 N/A 48,000 7/8 1/2 3/4 1/2 7/8 1/2 5/8 N/A 60,000 7/8 1/2 3/4 1/2 7/8 1/2 3/4 N/A 72,000 7/8 1/2 3/4 5/8 7/8 1/2 3/4 N/A 84, /8 5/8 7/8 5/8 1-1/8 5/8 3/4 N/A 96, /8 5/8 7/8 5/8 1-1/8 5/8 3/4 N/A 120, /8 3/4 7/8 3/4 1-3/8 5/8 7/8 N/A 150, /8 3/4 1-1/8 3/4 1-3/8 3/4 7/8 N/A 180, /8 3/4 1-1/8 3/4 1-3/8 3/4 1-1/8 N/A 220, /8 7/8 1-1/8 7/8 1-5/8 3/4 1-3/8 N/A 250, /8 7/8 1-3/8 7/8 1-5/8 7/8 1-3/8 N/A 300, /8 7/8 1-3/8 1-1/8 1-5/8 7/8 1-3/8 N/A 360, /8 1-1/8 1-3/8 1-1/8 2-1/8 1-1/8 1-3/8 N/A 420, /8 1-1/8 1-3/8 1-1/8 2-1/8 1-1/8 1-5/8 N/A NOTES: 1. Line sizes are calculated assuming single scroll compressors in Models and tandem scroll compressors in Models Contact the factory for any other compressor configuration. 2. All piping must comply with standard refrigeration piping techniques. Consult the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Handbook-Refrigeration. 3. Suction, hot gas bypass and hot gas reheat lines should be insulated with a 5/8 minimum thickness closed cell foam insulation. Liquid line exposed to high ambient temperatures should be insulated with a 5/8 minimum thickness closed cell foam insulation. 4. Maximum suction line vertical lift is 60. Loop piping to the top of the coil. 5. Maximum liquid line vertical lift is If ordered, hot gas reheat and hot gas bypass require only one line. 7. Standard hot gas bypass is not recommended for use with greater than 75 of equivalent line length. Internal hot gas bypass should be used as an alternative. 8. Contact factory for applications with digital scroll compressors. 9. Contact factory for layouts requiring more than 75 of actual line length. 19

20 Thank you for your business! Installation Code and Annual Inspections: All installation and service of WEATHER-RITE equipment must be performed by a contractor qualified in the installation and service of equipment sold and supplied by Weather-Rite LLC and conform to all requirements set forth in the WEATHER-RITE manuals and all applicable governmental authorities pertaining to the installation, service, operation and labeling of the equipment. To help facilitate optimum performance and safety, Weather-Rite LLC recommends that a qualified contractor conduct, at a minimum, annual inspections of your WEATHER-RITE equipment and perform service where necessary, using only replacement parts sold and supplied by Weather-Rite LLC. Further Information: Applications, engineering and detailed guidance on systems design, installation and equipment performance is available through WEATHER-RITE representatives. Please contact us for any further information you may require, including the Installation, Operation and Service Manual. There are references on this document to various trademarks. All trademarks mentioned herein, whether registered or not, are the property of their respective owners. Weather-Rite LLC is not sponsored by or affiliated with any of the trademark or registered trademark owners, and make no representations about them, their owners, their products or services. Weather-Rite LLC is not sponsored by or affiliated with BACnet or LonWorks. These products (with the exception of the CGTH and UHA[X][S] 30-75) are not for residential use. This document is intended to assist licensed professionals in the exercise of their professional judgment. Weather-Rite LLC 616 North 5th Street Minneapolis, MN Telephone: Fax: Toll Free: Weather-Rite LLC All rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems without written permission of Weather-Rite LLC. Printed in the USA WRRCADSGNA 0114 Rev A