STANDARD METAL ARCHITECTURAL HARDWARE PRICE BOOK #4 EFFECTIVE SEPT. 18 TH 2006

Transcription

1 STANDARD METAL ARCHITECTURAL HARDWARE PRICE BOOK #4 EFFECTIVE SEPT. 18 TH 2006 STANDARD METAL HARDWARE MANUFACTURING LTD. 52 BARTOR RD. TORONTO, ONTARIO, CANADA M9M 2G5 Tel: Fax: Toll Free: Web:

2 1 GUARANTEE We guarantee our products against fault in workmanship. Claims for defects must be made immediately upon receipt of goods. All products sold with a lacquered and powder coat finish are not guaranteed against scratching, chipping or fading. Please note that 10B & 20D are inconsistent and unstable finishes and therefore cannot be guaranteed. The materials used for these and all finishes are the best available; consequently, we cannot guarantee against deterioration due to wear or environmental conditions. PRICES Prices are subject to change without notice. Prices do not include sales taxes.. TERMS Terms are net 30 days. A 2% cash discount is allowed if payment is received within 5 days. All accounts over 30 days will be charged interest at a rate of 2.5% monthly commencing on invoice date. PREPAID SHIPMENTS Each single shipment over $ net value will be prepaid via routing of our choice. CANCELLATIONS All cancelled orders may be subject to a service charge expressed at the time of the factory consent to cancellation. CLAIMS FOR LOST GOODS When goods are accepted by the carrier they cease to be our property and belong to the purchaser. Any claim for loss or damage in transit should be made by the purchaser to the carrier. RETURN OF GOODS Permission to return goods for any reason must be first obtained in writing from our factory. A restocking fee will apply. All customized items are not returnable.

3 GENERAL INFORMATION 2 N.B.H.A. B.H.M.A. FINISHES P 600 STEEL, PRIMED FOR PAINT 2C 602 STEEL, CADMIUM PLATED 2G 603 STEEL, ZINC PLATED BRIGHT BRASS, CLEAR LACQUERED 3A BRIGHT BRASS, NO LACQUER SATIN BRASS, CLEAR LACQUERED SATIN BRASS, OXIDIZED AND RELIEVED ( ANTIQUED ) BRIGHT BRONZE, CLEAR LACQUERED 9A BRIGHT BRONZE, NO LACQUER SATIN BRONZE, CLEAR LACQUERED 10A SATIN BRONZE, NO LACQUER 10B 613 SATIN BRONZE, OXIDIZED AND OIL RUBBED BRIGHT NICKEL SATIN NICKEL 17A 648 NICKEL PLATED, BLACKENED, MATTE RELIEVED, CLEAR LACQUERED 19 ALUMINUM, ANODIZED BLACK 20L 623 BRONZE, OXIDIZED LIGHT AND LACQUERED 20M BRONZE, OXIDIZED MEDIUM AND LACQUERED 20D 624 BRONZE, OXIDIZED DARK AND LACQUERED BRIGHT CHROMIUM 26D 626 SATIN CHROMIUM SATIN ALUMINUM, CLEAR LACQUERED SATIN ALUMINUM, ANODIZED CLEAR BRIGHT STAINLESS STEEL 32D 630 SATIN STAINLESS STEEL MOUNTINGS No. 2 Thru bolt mounting (no charge when purchased with pull) $ 5.25 set No. 4A Glass door washer with vinyl pad $ set No. 4B Spanner-head security bolt $ set No. 5 Concealed single or back to back mounting $ set *** Self drilling stainless steel kickplate screws #6 x.625" phillips pan head $ / HD *** Full stainless steel pop rivets for kickplates.156" diam. $ / HD ENGRAVING ROUND MATERIAL / FLAT MATERIAL.75" diam. / 1" diam. / 1.25" diam. /.75" high / 1" high / 1.25" high PUSH or PULL $ / $ / $ / $ / $ / $ POUSSEZ $ / $ / $ / $ / $ / $ TIREZ $ / $ / $ / $ / $ / $ FEMALE PICTO 3.5" HIGH $ MALE PICTO 3.5" HIGH $ HANDICAP PICTO 3.5" HIGH $ ALUMINUM COLOUR ANODIZING - add 75% to C28 pricing FOR FINISHES C5, C9, C11, C14, C26 & C32 - add 50% to C4, C10, C15, 26D & 32D pricing

4 2007 ~ "2000" SERIES " diam. x 7" c.c. pull " diam. x 7" c.c. pull " diam. x 7" c.c. pull " diam. x 9" c.c. pull " diam. x 9" c.c. pull " diam. x 9" c.c. pull " diam. x 12" c.c. pull " diam. x 12" c.c. pull " diam. x 12" c.c. pull " diam. x 15" c.c. pull " diam. x 15" c.c. pull " diam. x 15" c.c. pull 's " x 7" pull / glass door rose " x 7" pull / glass door rose " x 9" pull / glass door rose " x 9" pull / glass door rose " x 12" pull / glass door rose " x 12" pull / glass door rose " x 15" pull / glass door rose " x 15" pull / glass door rose 's " x 7" pull / 2" rose " x 7" pull / 2" rose " x 9" pull / 2" rose " x 9" pull / 2" rose " x 12" pull / 2" rose " x 12" pull / 2" rose " x 15" pull / 2" rose " x 15" pull / 2" rose 's " x 7" pull / narrow b/plate " x 7" pull / narrow b/plate " x 9" pull / narrow b/plate " x 9" pull / narrow b/plate " x 12" pull / narrow b/plate " x 12" pull / narrow b/plate " x 15" pull / narrow b/plate " x 15" pull / narrow b/plate 's " x 7" pull / b/plate B.75" x 7" pull /.062 b/plate " x 7" pull / b/plate B-2 1" x 7" pull /.062 b/plate " x 9" pull / b/plate B.75" x 9" pull /.062 b/plate " x 9" pull / b/plate B-2 1" x 9" pull /.062 b/plate " x 12" pull / b/plate

5 2412B ~ 's B.75" x 12" pull /.062 b/plate " x 12" pull / b/plate B-2 1" x 12" pull /.062 b/plate " x 15" pull / b/plate B.75" x 15" pull /.062 b/plate " x 15" pull / b/plate B-2 1" x 15" pull /.062 b/plate 's " x 7" pull / b/plate B.75" x 7" pull /.062 b/plate " x 7" pull / b/plate B-2 1" x 7" pull /.062 b/plate " x 9" pull / b/plate B.75" x 9" pull /.062 b/plate " x 9" pull / b/plate B-2 1" x 9" pull /.062 b/plate " x 12" pull / b/plate B.75" x 12" pull /.062 b/plate " x 12" pull / b/plate B-2 1" x 12" pull /.062 b/plate " x 15" pull / b/plate B.75" x 15" pull /.062 b/plate " x 15" pull / b/plate B-2 1" x 15" pull /.062 b/plate "3000" SERIES " diam. x 9" c.c. pull " diam. x 9" c.c. pull " diam. x 9" c.c " diam. x 12" c.c. pull " diam. x 12" c.c. pull " diam. x 12" c.c. pull " diam. x 15" c.c. pull " diam. x 15" c.c. pull " diam. x 15" c.c. pull 's " x 9" pull / glass door rose " x 9" pull / glass door rose " x 12" pull / glass door rose " x 12" pull / glass door rose " x 15" pull / glass door rose " x 15" pull / glass door rose 's " x 9" pull / 2" rose " x 9" pull / 2" rose " x 12" pull / 2" rose " x 12" pull / 2" rose " x 15" pull / 2" rose " x 15" pull / 2" rose 's " x 9" pull / narrow b/plate

6 ~ 's " x 9" pull / narrow b/plate " x 12" pull / narrow b/plate " x 12" pull / narrow b/plate " x 15" pull / narrow b/plate " x 15" pull / narrow b/plate 's " x 9" pull / b/plate B.75" x 9" pull /.062 b/plate " x 9" pull / b/plate B-2 1" x 9" pull /.062 b/plate " x 12" pull / b/plate B.75" x 12" pull /.062 b/plate " x 12" pull / b/plate B-2 1" x 12" pull /.062 b/plate " x 15" pull / b/plate B.75" x 15" pull /.062 b/plate " x 15" pull / b/plate B-2 1" x 15" pull /.062 b/plate 's " x 9" pull / b/plate B.75" x 9" pull /.062 b/plate " x 9" pull / b/plate B-2 1" x 9" pull /.062 b/plate " x 12" pull / b/plate B.75" x 12" pull /.062 b/plate " x 12" pull / b/plate B-2 1" x 12" pull /.062 b/plate " x 15" pull / b/plate B.75" x 15" pull /.062 b/plate " x 15" pull / b/plate B-2 1" x 15" pull /.062 b/plate "6000" SERIES " diam. x 30" c.c. bar " diam. x 30" c.c. bar " diam. x 30" c.c. bar " diam. x 34" c.c. bar " diam. x 34" c.c. bar " diam. x 34" c.c. bar 's " x 30" bar / glass door rose " x 30" bar / glass door rose " x 34" bar / glass door rose " x 34" bar / glass door rose 's /.75" diam. x 30" c.c. bar / 1" diam. x 30" c.c. bar / 1.25" diam. x 30" c.c. bar /.75" diam. x 34" c.c. bar / 1"diam. x 34" c.c. x bar / 1.25" diam. x 34" c.c. bar

7 6330 ~ B 's /.75" x 30" bar / glass d/ rose / 1" x 30" bar / glass d/rose /.75" x 34" bar / glass d/rose / 1" x 34" bar / glass d/rose "9000" SERIES /2 round pull x 5" c.c /2 round pull x 7" c.c /2 round pull x 9" c.c /2 round pull x 12" c.c 's " pull / rectangular pads " pull / rectangular pads " pull / rectangular pads " pull / rectangular pads 's " pull / 2" rose " pull / 2" rose " pull / 2" rose " pull / 2" rose 's " pull / narrow b/plate " pull / narrow b/plate " pull / narrow b/plate " pull / narrow b/plate 's " pull / b/plate B 5" pull /.062 b/plate " pull / b/plate B 7" pull /.062 b/plate " pull / b/plate B 9" pull /.062 b/plate " pull / b/plate B 12" pull /.062 b/plate 's " pull / b/plate B 5" pull /.062 b/plate " pull / b/plate B 7" pull /.062 b/plate " pull / b/plate B 9" pull /.062 b/plate " pull / b/plate B 12" pull /.062 b/plate "B" SERIES 13 B300.5" x 2" bumper bar - 24" c.c B300 per inch add-on B301.5" x 1.5" bumper bar - 24" c.c B301 per inch add-on B302.5" x 2" bumper bar - 24" c.c B302 per inch add-on B303.5" x 1.5" bumper bar - 24" c.c B303 per inch add-on B304.5" x 2" bumper bar - 24" c.c

8 B305 ~ C337 7 "B" SERIES B304 per inch add-on B305.5" x 1.5" bumper bar- 24" c.c B305 per inch add-on B306.25" x 2" bumper bar- 24" c.c B306 per inch add-on B " x 1.5" guard bar- 24" c.c B307 per inch add-on B308 door bar - 24" c.c B308 per inch add-on B " x 1.5" guard bar- 24" c.c B309 per inch add-on B310 double guard bar - 24" c.c B310 per inch add-on B " x 1.5" guard bar- 24" c.c B311 per inch add-on B312 double guard bar - 24" c.c B312 per inch add-on B " x 1.5" guard bar- 24" c.c B313 per inch add-on B314 double guard bar - 24" c.c B314 per inch add-on B " x 1.5" push bar- 24" c.c B315 per inch add-on B " x 1.5" push bar- 24" c.c B316 per inch add-on B317 double push bar - 24" c.c B317 per inch add-on "C" SERIES 18 C320 12" c.c. door pull C321 12" c.c. offset door pull C322 5" x 12" plate pull C323 5" x 12" plate pull C324 6" x 12" plate pull C325 6" x 12" plate pull C326 6" x 12" plate pull C327 6" x 12" plate pull C " x 12" plate pull C329 5" x 12" metal & wood pull C330 4" x 16" metal & wood pull C331 4" x 16" church pull C332 5" x 12" church pull C333 5" x 12" church pull C " diam. x 15" pull C " diam. x 15" church pull C " diam. x 15" offset pull C " diam. x 15" church pull

9 C338 ~ D381 8 "C" SERIES 24 C338.75" x 1" x 9" pull C339.75" x 1" x 9" offset pull C340 12" offset door pull C341 12" offset door pull & plate C342 12" offset door pull C343 14" wood grip pull C344 11" wood grip pull C345 11" wood grip church pull "D" SERIES 27 D347 1" diam. x 18" door pull D348 1" diam. x 18" door pull D349 1" diam. x 18" offset door pull D350 1" diam. x 18" offset door pull D351 full height pull -.75 to 1.5"diam. _ price on application 28 D352 full height pull -.75 to 1.5"diam. _ price on application 28 D353 full height offset pull -.75 to 1.5"diam. _ price on application 28 D354 full height -.75 to 1.5"diam. _ price on application 29 D355 1" diam. x 42" pull D356 1" diam. x 42" pull D357 1" diam. x 42" pull D358 1" diam. x 42" pull D359 1" diam. x 37.5" "S" pull D " diam. "L" bar - 34" c.c D " diam. "L" bar - 34" c.c D362.75" diam. "C" pull D " diam. "C" pull D " diam. "C" pull D " diam. "C" pull D " diam. "C" pull D365 1"/1.25" x 12" offset pull D366 1" diam. x 12" offset pull D367 1" diam. x 12" c.c. pull D368 1" diam. "L" pull D369 1" diam. x 12" c.c. pull D370 1" diam. x 24" pull D371 1" diam. x 22" pull D372 1" diam. x 21" pull D " x 1.5" x 10" "C" pull D374 14" cast "C" pull D375 9" cast "C" pull D376.75" x 1.5" x 18" pull D " diam. x 16" pull D378.75" dia. x 14" "S" pull D " diam. X 15" pull D380.5" x 1.5" x 24" pull D381.5" x 1.5" x 24" pull

10 D382 ~ G209 9 "D" SERIES 36 D382.5" x 1.5" x 24" pull D383 1" x 12" door pull D384 12" offset door pull D385 1" x 1.5" x 12" door pull D386.5" x 1" x 12" door pull D387 1" x 2" x 36" door pull D " "V" pull D389 22" cast door pull D390 22" cast door pull D391 22" cast door pull D392 18" ornamental door pull D " ornamental door pull D " ornamental door pull D395 13" cast door pull D396 18" rounded edge door pull D " cast door pull "F" SERIES 64 F65 1" x 6.75" extension flush bolt F65UL U.L. listed extension flush bolt F66 flush bolt adaptor F67 8" heavy duty surface bolt F68 dust proof strike F69 4" surface bolt F70 6" surface bolt F71MD auto flush bolt- metal doors F72WD auto flush bolt- wood doors F73MD combo flush bolt- metal doors F74WD combo flush bolt- wood doors F75 roller latch- "T" strike F76 roller latch- ASA strike F77 roller latch- backstop "T" strike F78 roller latch- heavy mortise strike F79 backstop roller latch insert F80 adjustable ball catch colour catalogue 36 F85 3" diam. thumb-turn "G" SERIES 1.25" S.S. GRAB BARS exp. exp.& peened conc. conc. & peened 73 G200 12" straight grab bar G201 16" straight grab bar G202 18" straight grab bar G203 24" straight grab bar G204 30" straight grab bar G205 32" straight grab bar G206 36" straight grab bar G207 48" straight grab bar G208 16" x 32" "L" grab bar G209 16" x 32" "L" grab bar

11 G210 ~ H PG. PRODUCT 1.25" S.S. GRAB BARS exp. exp. & peened conc. conc. & peened NO. NUMBER "G" SERIES 73 G210 16" x 24" "L" grab bar G211 16" x 24" "L" grab bar G212 24" x 36" "L" grab bar G213 24" x 36" "L" grab bar G214 24" straight bar/ centre support G215 30" straight bar/ centre support G216 36" straight bar/ centre support G217 48" straight bar/ centre support G218 30" x 30" x 90 deg. "L" bar G219 12" x 12" x 120 deg. "L" bar G220 24" x 24" x 120 deg. "L" bar G221 chrome swing away bar C G222 chrome swing away bar C G223 S.S. swing away bar 32D G224 S.S. swing away bar 32D G225 S.S. swing away bar 32D G226 S.S. swing away bar 32D G227 S.S. lift up bar colour catalogue 36 G228 hospital adjustable back rest 32D "H" SERIES 42 H400 squash court ring pull H401 drop ring pull H " x " flush pull H " x 3.75" flush pull H " x 4.625" flush pull H " x 4.875" flush pull H406 4" x 5" S.S. flush pull H " cast cylinder pull H " cast cylinder pull H " steel cylinder pull paint H " steel cylinder pull paint H " cylinder pull H412 4" x 6" pull plate H413 4" x 16" pull plate H414 4" x 20" pull plate H415 4" x 16" flush plate pull H416 4" x 16" flush plate pull H " hospital grip H " hospital grip H419 5" hospital grip H420 9" hospital pull H " surface mtg. grip H " grip H423 8" grip H " institutional pull

12 H425 ~ K20 11 "H" SERIES 48 H425 8" institutional pull insert H426 3/4" x 3.875" edge pull "J" SERIES 70 J190 cast handrail bracket - 3" proj J191 S.S. handrail bracket - 4.5" proj J192 cast handrail bracket " proj J193 cast handrail bracket " proj colour catalogue 36 J194 zinc handrail bracket - 3 1/8" proj "K" SERIES. plates are drilled & countersunk, supplied with no. 6 x.625" oval head sheet metal screw. no.6-32 x.325" machine screw is supplied on request. fractional size plates are priced to the next inch. plates are priced per 100 / sq. inch. brass & bronze plate max. height is 24". PLATES CUT FOR CYLINDER add 9.95 each hole. TAPE MTG. add /sq. inch. self-drilling/tek screws are available at 39.50/hd 54 K08 clear acrylic plate / 100 sqare inch 54 K09 kydex plate price on application 54 K10A metal plate -.050" K10B metal plate -.062" K10C metal plate -.125" insert K10F fire rated metal plate - 40" high price on application insert K10FT fire rated metal plate - tape mtg. - 40" high price on application 54 K10R metal plate - radius corners add to plate price 54 K10-20 metal plate - type 304 /.037" K metal plate - type 430 /.050" K11A pushplate -.050" K11B pushplate -.062" K11C pushplate -.125" K11F pushplate - female picto add to pushplate price 55 K11H pushplate - handicap picto add to pushplate price 55 K11M pushplate - male picto add to pushplate price 55 K11A-1 pushplate - 3" x 12" K11A-2 pushplate - 3.5" x 15" K11A-3 pushplate - 4" x 16" K11A-4 pushplate - 4" x 20" K11A-5 pushplate - 5" x 15" K11A-6 pushplate - 5" x 20" K12 pushplate - radius ends add to pushplate price 55 K13 pushplate - half round add to pushplate price 55 K14 pushplate - radius corners add to pushplate price 55 K15 pushplate - colonial add to pushplate price 55 K16 pushplate - "D" shape add to pushplate price 56 K17 cast p/plate " x 15.5" antique, brass or bronze K18 cast p/plate - 2" x 14" antique, brass or bronze K19 cast p/plate - 3" x 22.5" antique, brass or bronze K20 cast p/plate " x 13" antique, brass or bronze

13 K21 ~ M92A 12 "K" SERIES 57 K21 cast p/plate - 2.5" x 16" antique, brass or bronze K22 cast p/plate " x 18.25" antique, brass or bronze K23 cast p/plate - 1.5" x 17.5" antique, brass or bronze K24 cast p/plate - 1.5" x " antique, brass or bronze K25 cast lever - 2" x 4.5" antique, brass or bronze set 58 K26 cast lever " x 4.5" antique, brass or bronze set 58 K27 cast lever - 2" x 4.5" antique, brass or bronze set 59 K " x 1.25" corner guard -40" K28 per inch add-on K29 3" x 3" corner guard - 40" K29 per inch add-on K30 2" x 1.75" X 2" U-channel -36" K31 6" x 1.75" x 2" U-channel -36" K32 side angle plate price on application 60 K33 bottom angle plate price on application 60 K34 two side angle plate price on application 60 K35.125" x 1.5" astragal paint / foot 32D / foot 60 K36.125" x 2" astragal paint / foot 32D / foot 61 K37 mortised edge guard - 90 degree K38 mortised edge guard - 93 degree K39 mortised edge guard - 90 degree K40 mortised edge guard - 93 degree insert K40F fire rated edge guard - full length price on application insert K40FT fire rated edge guard- tape mtg. full length price on application 61 K41 non-mortise edge guard - 90 deg K42 non-mortise edge guard - 93 deg K43 non-mortise edge guard - 90 deg K44 non-mortise edge guard - 93 deg K45 overlapping edge guard - 90 deg K46 overlapping edge guard - 93 deg K47 overlapping edge guard - 90 deg K48 overlapping edge guard - 93 deg K37 to K48 per inch add-on insert K50F fire rated frame protect - 40" high price on application insert K50FT fire rated frame protect- tape mtg. 40" high price on application "M" SERIES 71 M85A.312" X 3.5" cabinet pull n/a M85B.312" x 4" cabinet pull n/a M85C.312" x 5" cabinet pull n/a M85D.312" x 6" cabinet pull n/a M87A 3.5" cabinet pull M87B 4" cabinet pull M88 backplate for M85A to M87B n/a M89 4" drawer pull M " diam. cabinet knob & rose discontinued 71 M " diam. cabinet knob & rose M92A 1" diam. x 1"cabinet knob

14 M92B ~ S "M" SERIES 71 M92B 1.25"diam. x 1.25"cabinet knob M93A 1" x 1" cabinet knob M93B 1.25" x 1.25" cabinet knob colour catalogue 36 M95 6" cabinet/door pull colour catalogue 36 M96 8" cabinet/door pull "P" SERIES 67 P " hat & coat hook P " coat hook P " hat & coat hook 6.50 C P " hat & coat hook 4.50 C P144 concealed coat hook P145 exposed coat hook P " hat & coat hook P147 3" coat hook P " concealed coat hook P149 3" concealed coat hook P " hat & coat hook P151 2" coat hook P152 round base coat hook P153 round base double coat hook P154 strip coat hook (2) P155 1" diam. x 1.5" coat hook P156 1" diam. x 2.25" coat hook P157 1" diam x 3" coat hook P158 1" diam. x 1.5" coat hook P159 1" diam. x 2.5" coat hook P160 1" diam. x 2.5" coat hook P161 1" diam. x 1.5" coat hook P162 1" diam. x 2.5" coat hook P163 1" diam. x 2.5" coat hook P164 1" diam. x 1.5" coat hook P165 1" diam. x 2.5" coat hook P166 1" diam. x 2.5" coat hook colour catalogue 36 P167 3/4" diam. x 1.75" coat hook colour catalogue 36 P " proj. coat hook colour catalogue 36 P169 2" diam. retractable coat hook colour catalogue 36 P170 2" diam. base x 3" coat hook "R" SERIES 72 R80 1"o.d. closet rod C / foot 72 R " diam. closet rod C / foot 72 R82 closet rod support C each 72 R83 1" i.d. closet rod flange C each 72 R " i.d. closet rod flange C each "S" SERIES 49 S100.25" zinc dome floor stop S101.25" heavy duty dome floor stop S102.5" zinc dome floor stop insert S102L 1.5"high x.25"rise dome floor stop S103.5" heavy duty dome floor stop

15 S104 ~ T63 14 "S" SERIES 49 S104.25" floor stop riser S105.5" stop riser S " heavy duty floor stop S108 3" heavy duty floor stop S109 3" heavy duty floor stop S " heavy duty floor stop S111 5" heavy duty door holder S112 5" zinc door holder S " heavy duty floor stop S " heavy duty floor stop S " heavy duty floor stop S " heavy duty floor stop insert S " high x 1.25" diam. floor stop insert S119 1" diam. door bumper S120 convex zinc wall stop with b/plate S121 convex h.d. wall stop with b/plate S122 concave zinc wall stop with b/plate S123 concave h.d. wall stop with b/plate S124 convex s.s. wall stop S125 concave s.s. wall stop S126 1" diam. door bumper product number changed to # S S127 concave rubber bumper 5.46 / gray rubber 53 S128 convex rubber bumper 5.46 / gray rubber 53 S " h.d. baseboard stop S " h.d. baseboard stop S " h.d. baseboard stop colour catalogue 36 S133 low door stop 2" x 4" x 1/4" rise colour catalogue 36 S " heavy duty baseboard stop "T" SERIES 62 T45 T- strike - blank paint T46 T- strike - c.f.l paint T47 T- strike - blank, short lip paint T48 T- strike - c.f.l., short lip paint T49 T- strike - blank, no lip paint T50 T- stike - c.f.l., no lip paint T51 a.s.a. strike - blank paint T52 a.s.a. strike - c.f.l paint T53 a.s.a. strike - blank, short lip paint T54 a.s.a. strike - c.f.l., short lip paint T55 a.s.a. strike - blank, no lip paint T56 a.s.a. strike - c.f.l., no lip paint T57 flush bolt filler plate paint T58 lock face filler plate paint T59 1" blank latch front 8.83 paint T " blank latch front 8.83 paint T61 4.5" hinge filler plate paint T " hole filler plate paint T " hole filler plate paint

16