ADHESIVE. -65 degrees to degrees. +50 degrees

Transcription

1 ADHESIVE F to All temperature and freezer grade acrylic emulsion, good initial tack and high ultimate adhesion, excellent permanency at room temperature, good plasticizer, U.V. and solvent resistance - not recommended for water immersion, good on low surface energy plastics, good cold flow for adhesion to textured and hard to label surfaces. Complies with FDA 21 CFR for indirect food contact applications. F to +200 An all temperature acrylic adhesive that performs in normal to freezer temperature applications. This adhesive exhibits some repositionability on some substrates (please test) and develops a permanent bond to a wide variety of substrates. Complies with FDA 21 CFR for indirect food contact applications. F to A rubber based adhesive characterized by moderate initial tack and excellent ultimate adhesion to shrink films, corrugated and other substrates that are often utilized in cold temperature and freezer packaging. This adhesive has demonstrated effective adhesion to cold/wet substrates. LT to +150 A highly aggressive permanent adhesive specifically designed for difficult-to-label surfaces, such as wood and textured substrates. Not recommended for diecutting and stripping. Complies with FDA 21 CFR for indirect food contact applications. OL to +150 Solvent acrylic permanent adhesive for Overlaminating and Prime Label applications. This adhesive is used in overlaminates to protect printed substrates or to enhance finished products. It is designed for high speed automatic label application. P to +302 A high performance, durable, permanent acrylic emulsion adhesive with aggressive initial tack, excellent ultimate adhesion and mandrel hold. It is extremely chemical and solvent resistant and has very good adhesion to various high and low energy substrates. P to +122 A rubber-resin hotmelt permanent adhesive. Very good adhesion to non polar surfaces and moist surfaces, with high initial adhesion. Good low temperature performance once labeled. P to +131 A general purpose permanent adhesive. Excellent adhesion, initial tack and high ultimate adhesion to wide variety of substrates.

2 P to +200 Permanent latex adhesive providing intial tack and high ultimate adhesion. Use on Kraft, corrugated, paper, polypropylene, polyurethane, polycarbonate, rigid PVC, ABS, Cryovac and high density treated and untreated polyethylene. P to +220 Rubber based emulsion, high initial tack, high ultimate adhesion, excellent adhesion to corrugated and like surfaces and most plastics, can be applied to curved surfaces to 1/2" diameter. Complies with FDA 21 CFR for indirect food contact, acid free, not recommended for water immersion. P to +200 General purpose acrylic adhesive showing good initial tack, shear and high ultimate adhesion. It has a good plasticizer, UV and Solvent resistance. Excellent diecutting and striping traits & has excellent adhesion to many diffferent substrates. Complies with FDA 21 CFR for indirect food contact applications. P to +150 Rubber based emulsion, with excellent tack, high ultimate adhesion to a variety of surfaces including polystyrene, Bopp, polyethylene, paper and corrugate. Suitable for cold, damp labeling applications. Complies with FDA 21 CFR for indirect food contact applications. P to +200 Good general permanent clear emulsion adhesive that is excellent for a wide variety of substrates, including glass bottle labeling. Is repositionable for up to 2 hours on HDPE bottles. For all other substrates testing should be done to determine the repositionability aspects. Complies with FDA 21 CFR for indirect food contact applications. P to +120 Rubber base Hot Melt. Combined cold temperature and permanent, exhibiting excellent adhesion to a variety of substrates. Complies with FDA 21 CFR for indirect food contact applications. P to +302 General purpose acrylic permanent exhibiting excellent adhesion to a broad range of surfaces. Used on Polyesters, vinyls. P24 P to to +200 Acrylic water base paper grade high tack permanent adhesive, with good water and aging resistance, featuring excellent adhesion to HDPE and corrugated paper substrates. Water based acrylic all-temperature permanent adhesive. Adhesive is both latex and elementally chlorine free. Exhibits high tack and moderate peel. Offers aggressive performance at low temperatures and is well suited for refrigerated food label applications. Excellent clarity on clear films. Excellent UV stability and resistance to thermal aging. Complies to FDA 21 CFR for indirect food contact applications.

3 P to +200 Acrylic dispersion permanent adhesive suitable tor textile labeling. Not suitable for labeling silk, leather, suede and PVC fabrics. Storage Temperature after labeling should not exceed 112 F. P to +212 Acrylic dispersion permanent adhesive specially designed for non-paper face materials. Good heat and water resistance. Good for most apparel labeling, except for leather, suede and silk. Removes cleanly without staining or residue. P to +200 Underwriters laboratories recognized permanent for type "L" listing or classification marking. Complies with FDA 21 CFR for indirect food contact applications. P to +200 Modified acrylic dispersion with all temperature adhesive qualities for prime labeling. P to Rubber base adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates. Complies with FDA 21 CFR for indirect food contact applications. P to +200 A modified acrylic dispersion all-temperature adhesive. Should be used when very good adhesion at low temperatures is required. Adhesion to non-polar surfaces is very good. Remains adherent at low temperatures. Limited heat resistance. Becomes more aggressive as the temperature drops, especially below 32 F. Not suitable for labeling curved surfaces. Limited adhesion to moist surfaces. P to Rubber base adhesive featuring high initial tack and ultimate bond strength to a wide variety of substrates including low surface energy plastics, glass and corrugated. P to Water base acrylic emulsion which adheres well to all normal substrates, including non-polar surfaces, films and corrugated board. Performs well at low temperatures. Complies with FDA 21 CFR for indirect food contact. P to Clear acrylic emulsion, high tack, high shear, high ultimate adhesion, recommended for tight diameter surfaces, excellent clarity with min. cold flow. Latex glove friendly and a UL approved adhesive, good plasticizer, U.V., and solvent resistance. Complies with FDA 21 CFR for indirect food contact. P to +176 Clear acrylic emulsion, high tack, high shear, high ultimate adhesion, chemical resistance to water, mild acids, salt and alkalis, most petroleum based greases, oils and lower aliphatic solvents. Suitable for use as signs, nameplates and prime labels.

4 P to +302 Clear solvent acrylic emulsion, high tack, high shear, high ultimate adhesion, chemical resistance to water, mild acids, salt and alkalis, most petroleum based greases, oils and lower aliphatic solvents. Suitable for use as signs, nameplates and prime labels. P to +160 A specialty adhesive designed to adhere to hard to label surfaces, including Tires, with excellent ultimate adhesion when applied at tempertures as low as -20 F. Outstanding permanency at room temperatures. This adhesive has good plasticizer, UV and solvent resistance and high intial tack. This adhesive has been ACTS tested and approved for skin contact. P69 P to to +120 Clear acrylic emulsion, high performance, high tack, durable and excellent ultimate adhesion and mandrel hold. It is extremely chemical and solvent resistant and has very good adhesion to various high and low energy substrates. Complies with FDA 21 CFR for indirect food contact. Rubber based cold temperature permanent adhesive with excellent tack and ultimate adhesion to a wide variety of surfaces, including most packaging films. This adhesive may be used as a Direct Food contact applied to poultry, dry food, and processed, frozen, dried, partial dehydrated and raw fruits and vegetables. Complies with FDA 21 CFR (a) & (b), for direct food contact applications. P to +200 This is a permanent pressure sensitive rubber base adhsive with an excellent adhesion and shear properties. P to +200 A general purpose permanent acrylic emulsion adhesive, characterized by excellent ultimate adhesion to a wide variety of substrates. Designed to eliminate virtually all sheet edge adhesive bleed and eliminate the need to strip a matrix around the edge. P to +200 A general purpose permanent acrylic emulsion adhesive, characterized by excellent ultimate adhesion to a wide variety of substrates. Designed to eliminate virtually all sheet edge adhesive bleed and eliminate the need to strip a matrix around the edge. P to +200 An acrylic emulsion, general purpose permanent adhesive with excellent initial tack and ultimate adhesion on a wide variety of substrates. P to +200 Acrylic emulsion, aggressive permanent with excellent processing and initial tack to corrugated and packaging films. Works well in pharmaceutical and medical applications. Complies with FDA 21 CFR for indirect food contact applications. P to +257 This adhesive was designed to exhibit good clarity and cold flow properties resulting in good wet-out performance.

5 P to +250 This adhesives' combined tack, peel and shear properties allows for short-term repositionability from most surfaces and compatibility with most high-speed dispensing equipment. Its clarity and flow-out characteristics makes this adhesive a perfect choice for the no-label look. P to +149 General purpose permanent acrylic water base adhesive. Good Adhesion to a wide variety of substrates, including non-polar surfaces. Direct Food Contact. R to +150 A specialty clear acrylic adhesive showing good initial removable tack with high shear and high removable adhesion. This adhesive has excellent clarity and minimum cold flow. Good removability on a wide range of substrates including corrugated and many plastic surfaces. R to +150 A specialty clear acrylic adhesive showing good initial removable tack with high shear and high removable adhesion. This adhesive has excellent clarity and minimum cold flow. Good removability on a wide range of substrates including corrugated and many plastic surfaces. R to +120 Rubber based emulsion, good initial tack and moderate adhesion - not recommended for tight diameter surfaces or corrugated applications, limited plasticizer, U.V., and solvent resistance - not recommended for water immersion; becomes more permanent in freezer conditions. R to +248 A general purpose acrylic based removable adhesive with excellent long-term removability from a wide variety of surfaces. Always pretest removable adhesives for suitability in each particular end use application. Complies with FDA 21 CFR for indirect food contact applications. R to +176 Low tack, removable adhesive which is clear and bonds well to smooth glass surfaces while removing cleanly. RF to +140 Removable acrylic water based adhesive. Good long-term removability from a wide variety of suraces. This adhesive conforms with the regulations for direct contact with dry, moist and such kind of fatty foodstuffs which have a reduction factor of at least 2. Compliies with FDA 21 CFR for direct food contact application. RP to +176 Modified acrylic dispersion, acid free. Strong initial tack. Good heat resistance, including non-polar surfaces, most films and corrugated board. Good low temperature performance.

6 S to +200 A general purpose permanent acrylic emulsion adhesive with aggressive initial tack, excellent ultimate adhesion and mandrel hold. Very good adhesion to corrugated, glass and various plastic substrates. Also used in healthcare applications and considered to be latex glove friendly. Complies with FDA 21 CFR for indirect food contact applications. SH to +167 Permanent acrylic adhesive with strong initial adhesion, high tack and good cohesion. Specially suitable for all-purpose applications on wet surfaces at low temperature. Repositionable for up to 30 minutes. Maintains a long period of resistance to humidity and condensation inside a refrigerator. Totally resistant to immersion in water and ice, for up to 4 hours. SH to +167 Permanent acrylic adhesive with strong initial adhesion, high tack and good cohesion. Specially suitable for all-purpose applications on wet surfaces at low temperature. Repositionable for up to 30 minutes. Maintains a long period of resistance to humidity and condensation inside a refrigerator. Totally resistant to immersion in water and ice, for up to 4 hours.. Newest generation of wine label adhesives. SP to +200 An aggressive rubber based adhesive showing high initial tack with high shear and high ultimate adhesion. It has fair plasticizer, UV and solvent resistance. This is not recommended for water immersion. This adhesive has good adhesion to most substrates. TP to +180 A general purpose acrylic adhesive showing good initial tack and high shear and high ultimate adhesion. It has a good plasticizer, UV and solvent resistance. This adhesive displays excellent die-cutting and stripping characteristics and has good adhesion to many different substrates. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS.

7 ADHESIVE F to All temperature and freezer grade acrylic emulsion, good initial tack and high ultimate adhesion, excellent permanency at room temperature, good plasticizer, U.V. and solvent resistance - not recommended for water immersion, good on low surface energy plastics, good cold flow for adhesion to textured and hard to label surfaces. Complies with FDA for indirect food contact. F to An acrylic cold temperature permanent adhesive with excellent initial tack and ultimate adhesion on a wide variety of substrates. MC to +120 A cold temperature, multi-purpose permanent-type, pressure sensitive, emulson adhesive featuring high initial tact and excellent permanency to a wide variety of substrates. Developed for refrigerated polyethylene containers, corrugated/paperboard, hard to bond plastic substrates. OL to +150 Solvent acrylic permanent adhesive for overlaminating and prime label applications. This adhesive is used in overlaminates to protect printed substrates or to enhance finished products. It is designed for high speed automatic label application. P to +131 A general purpose permanent adhesive. Excellent adhesion, initial tack and high ultimate adhesion to wide variety of substrates. P to +200 Permanent latex adhesive providing intial tack and high ultimate adhesion. Use on Kraft, corrugated, paper, polypropylene, polyurethane, polycarbonate, rigid PVC, ABS, Cryovac and high density treated and untreated polyethylene. P to +220 Rubber based emulsion, high initial tack, high ultimate adhesion, excellent adhesion to corrugated and like surfaces and most plastics, can be applied to curved surfaces to 1/2" diameter. Complies with FDA for indirect food contact, acid free.not recommended for water immersion. 5

8 ADHESIVE P to +150 Rubber based emulsion, with excellent tack, high ultimate adhesion to a variety of surfaces including polystyrene, Bopp, polyethylene, paper and corrugate. Suitable for cold, damp labeling applications.complies with FDA 21 CFR P to +120 Rubber base Hot Melt. Combined cold temperature and permanent, exhibiting excellent adhesion to a variety of substrates. Complies with FDA P to +120 Acrylic Emulsion, all temperature permanent providing excellent initial tack to a variety of substrates. Complies with FDA P23 P24 P37 P to to to to +200 General purpose acrylic permanent exhibiting excellent adhesion to a broad range of surfaces. Used on Polyesters, vinyls. Acrylic water base paper grade high tack permanent adhesive, with good water and aging resistance, featuring excellent adhesion to HDPE and corrugated paper substrates. Acrylic dispersion permanent adhesive specially designed for non-paper face materials. Good heat and water resistance. Good for most apparel labeling. Underwriters laboratories recognized permanent for type "L" listing or classification marking. Complies with FDA P to +200 Modified acrylic dispersion with all temperature adhesive qualities for prime labeling. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS. 6

9 ADHESIVE P to Clear acrylic emulsion, high tack, high shear, high ultimate adhesion, recommended for tight diameter surfaces, excellent clarity with min. cold flow. Latex glove friendly and a UL approved adhesive, good plasticizer, U.V., and solvent resistance. Complies with FDA for indirect food contact. P to Clear acrylic emulsion, high tack, high shear, high ultimate adhesion, chemical resistance to water, mild acids, salt and alkalis, most petroleum based greases, oils and lower aliphatic solvents. Suitable for use as signs, nameplates and prime labels. P to +176 Clear acrylic emulsion, high tack, high shear, high ultimate adhesion, chemical resistance to water, mild acids, salt and alkalis, most petroleum based greases, oils and lower aliphatic solvents. Suitable for use as signs, nameplates and prime labels. P to +302 Solvent base acrylic permanent adhesive. P to +150 Rubber base hot melt, general purpose permanent with excellent quick-stick properties. Suitable for various applications, including corrugated and films. Complies with FDA P to +180 Rubber based, general purpose permanent exhibiting high initial tack and ultimate adhesion to a wide variety of surfaces, including recycled corrugated. P to +150 Rubber base hot melt, General purpose permanent featuring quick-stick properties. Suitable for various applications, including corrugated and films. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS. 7

10 ADHESIVE P to +140 A specialty adhesive designed to adhere to slightly wet surfaces with good ultimate adhesion when applied at temperatures as low as -20F. Excellent permanency at room temperatures. Good plasticizer, UV and solvent resistance. Excellent adhesive for hard to label substrates. P to +200 This is a permanent pressure sensitive rubber base adhsive with an excellent adhesion and shear properties. P to +200 An acrylic emulsion, general purpose permanent adhesive with excellent initial tack and ultimate adhesion on a wide variety of substrates. P to +200 Acrylic emulsion, aggressive permanent with excellent processing and initial tack to corrugated and packaging films. Works well in pharmaceutical and medical applications. Complies with FDA P to +257 This adhesive was designed to exhibit good clarity and cold flow properties resulting in good wet-out performance. P to +302 This adhesive was designed to exhibit good clarity and cold flow properties resulting in good wet-out performance. Tamper evident adhesive. P to +250 This adhesives' combined tack, peel and shear properties allows for shortterm repositionability from most surfaces and compatibility with most highspeed dispensing equipment. Its clarity and flow-out characteristics makes this adhesive a perfect choice for the no-label look. P to +257 This adhesive was designed to exhibit good clarity and cold flow properties resulting in good wet-out performance. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS. 8

11 ADHESIVE P to +200 A premium permanent adhesive with some repositionable properties to certain films and plastic substates. This adhesive has good to excellent adhesion to a wide variety of packaging substrates. P to +176 An acrylic emulsion, general purpose permanent adhesive with excellent initial tack and ultimate adhesion on a wide variety of substrates. R to +200 A specialty removable adhesive designed to give good adhesion to smooth and rigid polyethylene and polypropylene yet remove leaving no residue. R to +176 Removable acrylic adhesive, which removes easily from most surfaces. However, application enviroment and certain surfaces such as vinyl, glass, acrylic, styrene and polycarbonate may cause increased adhesion and adhesive transfer. R to +200 A specialty adhesive designed to be removable from a wide variety of textiles and fabrics only. Used primarily for name badge applications. Not for use with fur, silk, leather and suede. Complies with FDA R to +120 Rubber based emulsion, good initial tack and moderate adhesion - not recommended for tight diameter surfaces or corrugated applications, limited plasticizer, U.V., and solvent resistance - not recommednded for water immersion; becomes more permanent in freezer conditions. R to +200 Acrylic emulsion, general purpose removable for clean, easy removal. Designed for metal and plastic surfaces. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS. 9

12 ADHESIVE R to +200 Removable acrylic emulsion medium initial tack with minimum adhesion build up over time. It will act as a permanent on smooth surfaces over long time periods or when used with facestocks having a lower internal bond. R to +176 Removable acrylic adhesive, which removes easily from most surfaces. However, application enviroment and certain surfaces such as vinyl, PVC, varnished wood and acrylic polycarbonate may cause increased adhesion and adhesive transfer. R to +250 Water based dispersion developed to provide good temporary adhesive to a variety of substrates. Exhibits good adhesion and clean long term removability from most smooth surfaces such as hard plastics, metal, glass and paper. It also adheres to many challenging surfaces such as Teflon, Textured PVC, and corrugated. RH to +65 Permanent acrylic adhesive with strong initial adhesion, high tack and good cohesion. Developed for application on wet surfaces. Especially suitable for wash-off labels on recyclable bottles. RP to +280 Clear acrylic emulsion, medium tack with excellent wetout on a wide range of substrates, including overlaminates. Repositionable for up to 20 minutes on most surfaces. RP to +176 Modified acrylic dispersion, acid free. Strong initial tack. Good heat resistance, including non-polar surfaces, most films and corrugated board. Good low temperature performance. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS. 10

13 ADHESIVE SH to +75 ADHESIVES Permanent acrylic adhesive with strong initial adhesion, high tack and good cohesion. Specially suitable for all-purpose applications on wet surfaces at low temperature. Excellent resistance to icewater which makes it our "wine reference adhesive". UL to +200 General purpose permanent adhesive with excellent initial tack and ultimate adhesion to a broad range of substrates. UL certified on certain substrates. P.I.C. INDUSTRIES, INC., RECOMMENDS THE THOROUGH TESTING OF ALL LAMINATED PRODUCTS UNDER END-USER CONDITIONS TO MAXIMIZE THE DESIRED ADHESIVE CHARACTERISTICS AND TO MINIMIZE LABEL ADHESION PROBLEMS. THE TYPICAL VALUES REPORTED MAY VARY WITHIN INDUSTRY STANDARDS.