FILM - PAPER CAPACITORS
|
|
|
- Shawn Turner
- 7 years ago
- Views:
Transcription
1 FILM - PAPER CAPACITORS AC APPLICATIONS CATALOG CAP 81
2 RONKEN capacitors are designed and manufactured to meet or exceed the requirements of Electronic Industries Association (E.l.A.) Standard RS-401. APPLICATIONS SCA Commutation ---- Snubber ---- Frequency Changers ---- Motor Speed Controls Static Power Supplies ---- Harmonic Filters ---- and Others. CONSTRUCTION The capacitor is constructed by winding low loss rough surfaced polypropylene film between two high grade aluminum foil electrodes. The foil electrodes are extended out each end of the winding forming a low loss extended foil (non-inductive) capacitor. Tinned copper leads are securely soldered to each end of the winding and to the terminal stud. The cover is sealed to the case by a double-lock roll seam. The unit is completely impregnated in LEKTROL, a non-pcb fluid which is biodegradable, low toxic, and environmentally compatible. The terminal assembly consists of a molded pillar insulator and a one piece copper stud capable of 120 amps rms. The terminal assembly is securely locked to the cover to withstand a 20 inch-lb max. torque on the non-ferrous covers. CHARACTERISTICS Polypropylene film is a low loss dielectric possessing high voltage stress capabilities. Combined with the extended foil construction, which minimizes series-resistance and series-inductance losses and allows for maximum heat transfer from within the winding, make these capacitors ideal for handling the fast rise time and high repetition rates associated with SCR commutation and other similar applications. RUPTURE PROTECTION The internal construction of commutation capacitors, using heavy leads and secure connections necessary to handle the high currents, does not permit the use of an internal protective device to minimize case rupture. Since the non-pcb impregnate is a combustible liquid, it is extremely important that the capacitor user exercise caution to insure the safest possible application of the capacitor to minimize the case rupture hazards. CAPACITANCE The capacitance is rated in microfarads (MF) at 25 C.The capacitance change over the temperature range of -40 C to +90 C shall not exceed ±5%. DISSIPATION FACTOR The dissipation factor shall not exceed 0.05% when measured at the 60 Hz rated voltage and any case temperature between 25 C and 90 C. TEMPERATURE LIFE The operating case temperature range is -40 C to +80 C. The capacitors are designed to provide a minimum of 40,000 hours life with a 95% survival when operated at rated voltage, current, case temperature, and volt-amperes. Exceeding the capacitor ratings without proper derating will result in a reduction of full rated life.
3 "A" "B" FOR 600V FIG. NO. FOR 1000V- 4000V FIG. NO. A C D E RONKEN STANDARD CAPACITOR Tinplated steel case and cover Terminals have four ¼ wide quick-connect blades --with webbed cups for 660V --with single deep cups for 1000V 4000V Internal discharge resistor for 1000V 4000V Also available with: Aluminum case and tinplated steel cover Color coded for capacitance ranges Terminals with two ¼ wide quick connect Blades and one fork solder-lug for 660V Catalog Revision 1/97
4 660 VAC 70 º 660 VAC 90º 1000 VAC MF ± 6% CATALOG NO. CATALOG NO. CATALOG NO. 0.5 USE 90ºC P81A29504H05 A USE 1250V 1.0 USE 90ºC P81A29105H05 A A33105H14 A USE 90ºC P81A26155H05 A A33155H14 A P81A23255H05 A 2.13 P81A24205H05 A A33205H14 A P81A23255H05 A 2.13 P81A24255H05 A A33255H14 A P81A23305H05 A 2.63 P81A24305H05 A C33305H14 C P81A23355H05 A 3.13 P81A24355H05 A C33355H14 C P81A23405H05 A 3.13 P81A24405H05 A C33405H14 C D33455H14 D P81A23505H05 A 3.50 P81A24505H05 A D33505H14 D P81A23605H05 A 4.25 P81C24605H05 C D33605H14 D P81A23705H05 A 4.75 P81C24705H05 C 81D33705H14 D P81C23805H05 C 3.13 P81C24805H05 C D33805H14 D D33905H14 D P81C23106H05 C 3.88 P81C24106H05 C D33106H14 D D33116H14 D P81C23126H05 C 4.50 P81C24126H05 C D33126H14 D D33136H14 D D33146H14 D P81C23156H05 C 5.75 P81D24156H05 D D33156H14 D VAC 1500 VAC 1750 VAC A35504H14 A A37504H14 A A39504H14 A A35105H14 A A37105H14 A C39105H14 C A35155H14 A C37155H14 C D39155H14 D C35205H14 C C37205H14 C D39205H14 D C35255H14 C C37255H14 C D39255H14 D C35305H14 C D37305H14 D D39305H14 D D35355H14 D D37355H14 D D39355H14 D D35405H14 D D37405H14 D D39405H14 D D35455H14 D D37455H14 D D39455H14 D D35505H14 D D37505H14 D D39505H14 D D35605H14 D D37605H14 D D39605H14 D D35705H14 D D37705H14 D E39705H14 E D35805H14 D D37805H14 D E39805H14 E D35905H14 D D37905H14 D E39905H14 E D35106H14 D D37106H14 D 81E39106H14 E D35116H14 D D37116H14 D D35126H14 D E37126H14 E D35136H14 D E37136H14 E D35145H14 D E37145H14 E D35156H14 D E37156H14 E 9.00 Consult factory for rating and sizes not listed.
5 2000 VAC 2250 VAC 2500 VAC MF ± 6% CATALOG NO. CATALOG NO. CATALOG NO A40504H14 A A41504H14 A C42504H14 C C40804H14 C C41804H14 C D42804H14 D D40105H14 D D41105H14 D D42105H14 D D40135H50 D D42235H50 D D42135H50 D D40155H14 D D41155H14 D D42155H14 D D40175H50 D D41175H50 D D42175H50 D D40185H50 D D41185H50 D D42185H14 D D40205H14 D D41205H14 D D42205H14 D D40235H50 D D41235H50 D D42235H50 D D40255H14 D D41255H14 D D42255H14 D D40285H50 D D41285H50 D D42285H50 D D40305H14 D D41305H14 D D42305H14 D D40335H50 D D41335H50 D D42335H50 D D40355H14 D D41355H14 D D42355H14 D D40405H14 D D41405H14 D E42405H14 E D40455H14 D D41455H14 D E42455H14 E D40505H14 D E41505H14 E E42504H14 E E40605H14 E E41605H14 E E42605H14 E E40705H14 E E41705H14 E E40805H14 E E41805H14 E 3000 VAC 3500 VAC 4000 VAC D44504H14 D D46504H14 D D48504H14 D D44804H14 D D46804H14 D D48804H14 D D44105H14 D D46105H14 D D48105H143 D D44135H50 D D46135H50 D D48135H50 D D44145H50 D D46145H50 D D48145H50 D D44155H14 D D46155H14 D D48155H14 D D44175H50 D D4617H50 D E48175H50 E D44185H50 D D46185H50 D E48185H50 E D44205H14 D D46205H14 D E48205H14 E D44235H50 D E46235H50 E E48235H50 E D44255H14 D E46255H14 E D44285H50 D E46285H50 E D44305H14 D E46305H14 E E44355H14 E E44405H14 E E44455H14 E 9.00 Consult factory for rating and sizes not listed.
6 . OTHER ACCESSORIES 1) Ground terminal welded to cover. 2) Discharge resistors - internal or external. 3) Molded rubber terminal boot #1 5C Consult factory for bracket configurations or accessories not CAPACITOR MOUNTING BRACKETS - Zinc Plated Steel Case Hook - Footed Saddle Footed Wrap-Around Style Part No. a b d e Part No. g h Part No. a b c A 25Q A A C 25Q C C D 25Q D D E 25Q E 25Q OTHER RONKEN BULLETINS CAP-50 TAPEWRAPPED Dry Filmet Capacitors CAP-61 WETMET VAC (film/metalized paper) Capacitors CAP-64 ALL -FILM SCR Commutation Capacitors CAP-71 ALL- PAPER VAC Capacitors CAP-81 FILM - PAPER VAC Capacitors CAP-86 FILM - PAPER SCR Commutation Capacitors CAP-91 FILMET VAC (metalized polypropylene) Capacitors
Types of Wound Film Capacitors
Types of Wound Film Capacitors A description of the various types of wound film capacitors available including construction, materials, features, strengths and application information. Prepared by Daryl
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS
MEDIUM AND HIGH VOLTAGE CAPACITORS, CAPACITOR BANKS AND SYSTEMS Meher Capacitors offers reliable and innovative products and solutions in the fields of Reactive Power Compensation, Power Quality and Energy
How To Build A Low Voltage Capacitor Lvcp
Low Voltage Capacitor LVCP The new choice for Power Factor Correction LVCP : the new choice for Power Factor Correction The LVCP is a compact and powerful capacitor. It offers high modularity, unmatched
Life Expectancy : Class A Class B Class C Class D 30,000hrs 10,000hrs 3,000hrs 1000hrs
3.2 Motor Run Capacitors : continuous operation ypical Applications : Motor Run Capacitor ideal for various motor applications in washing machine, air conditioner, electric water pump, power factor collection
X and Y Capacitors. Copyright 2008 KEMET
X and Y Capacitors X Capacitors Two Major Types: X2 and X1 X2 capacitors Agency tested with 2,500 volt surge test. Satisfies 99% of the applications. X1 capacitors Agency tested with 4,000 volt surge test.
MTE SERIES RLW. World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930. 2009 MTE Corporation
MTE SERIES RLW World REACTORS USER MANUAL PART NO. INSTR 030 REL. 090930 2009 MTE Corporation IMPORTANT USER INFORMATION NOTICE MTE Series RLW reactors are components designed to improve the reliability
Power Capacitor Units for improved power quality
Power Capacitor Units for improved power quality Applications for capacitors Reactive power compensation Most of the apparatus and loads connected to the electrical power system consume both active and
Bourns Resistive Products
Bourns Resistive Products Diverse Requirements Drive Innovations to Pulse Resistors Introduction Countless circuits depend on the protection provided by one of the most fundamental types of passive components:
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp
Page 1 2015 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable Grounded Metal
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF TECHNICAL INFORMATION
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF TECHNICAL INFORMATION Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. Technical content
MLCC Voltage Strength
Frequently asked questions regarding: MLCC Strength Richard Tse TDK Corporation of America Abstract Industry practice and rules of thumb will vary when considering the proper voltage rating of a capacitor.
Selector Switch Type 08
Compact and versatile 2 positions multi wafer selector switch For PCB mounting 25,000 switching cycles with up to 9.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft
SUCCESS EPCOS Capacitors
SUCCESS EPCOS Inc. Capacitors Group April, 2012 EV / HV / E-Mobility Battery charger system & Inverter On Board and Off Board Assembly Trend: Wireless Charging DC/DC Converter Filtering DC Link E-Mobility
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
12S, 14S, 15S Series. Time Delay Relays and Sequencers. Time Delay Relays and Sequencers. Features and Benefits. Switch Actions and Configurations
12S, 14S, 15S Series Time Delay Relays and Sequencers Time Delay Relays and Sequencers The Therm-O-Disc type 12S, 14S and 15S series time delay relays and sequencers are field-proven devices for controlling
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
Application Guide Film Capacitors
Capacitance Change vs. Temperature Insulation Resistance vs. Temperature Polyester Typical Characteristics at 1 khz % Capacitance Change % Capacitance Change Polypropylene Typical Characteristics at 1
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Mylar polyester film. Electrical Properties. Product Information. Dielectric Strength. Electrode Size. Film Thickness
Product Information Mylar polyester film Electrical Properties Mylar offers unique design capabilities to the electrical industry due to the excellent balance of its electrical properties with its chemical,
AP/UP, AP/MIL Series. Magnetic Circuit Protectors
AP/UP, AP/MIL Series Magnetic Circuit Protectors Introduction Poles Configurations Operating Characteristics Delay Curves Specifications Decision Tables 71 72 75 76 77 78 79 AP/UP, AP/MIL Series Hydraulic
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
Power Supply Cables and Connectors
Power Supply Cables and Connectors Often during the excitement of designing a challenging new system, some of the more mundane engineering aspects get overlooked. This is especially true of connections
SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
General information. Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news.
DC Film Capacitors Please refer to our Internet address (http://www.kemet.com) for updated information on KEMET products, services and news. Contents Pitch Rated Voltage Capacitance Page mm Vdc range range
Polymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
DYNACAP Double Layer Capacitor
DX Series (Terminal shaped V, H) Combines two coin cells using laser welding technology to obtain a rated voltage of 5.5V. Available in either vertical or horizontal terminal leads, they are 11.5 mm in
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Distribution Dry Type Transformers
8 TRASFORMERS Distribution Dry Type Transformers Table (Contact Sales office for List Price) (commonly used) 1a. 115 C Rise F 1b. 80 C Rise B 4. Wall Brackets1 W 6. Low noise XdB below std. LX Type bg
Film Capacitors for Automotive and Industrial Applications
Film Capacitors for Automotive and Industrial Applications Davide Montanari*, Kimmo Saarinen**, Fabio Scagliarini*, Dietmar Zeidler***, Matti Niskala**, Claes Nender# KEMET Electronics Corporation, 2835
Selector Switch Type 01
Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel
Welding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
Capacitors for A.C. motor applications
Capacitors for A.C. motor applications Contents Page General information 2 to 7 Capacitor selection guide 8 to 10 Plastic case series 11 to 37 Metalcaseseries 39to52 Boxseries 53to56 Mechanical drawings
CURRENT TRANSFORMER MODEL 546 UL1015 #16 AWG LEAD WIRE, STANDARD LENGTH IS 24" 1 X
CURRENT TRANSFORMER MODEL 546 1.10" I.D. PAGE No 1-38 REV 15DEC00 TERMINAL OPTION LEAD WIRE OPTION 1.10 0 1.20 2.55 3.00 3.47 0.18 x 0.31 SLOT ( 2 PLACES) 8-32 BRASS STUD (2 PLACES) UL1015 #16 AWG LEAD
New Distribution Class Arrester Ground Lead Disconnector Design Enhances Detonation Reliability and Improves Arrester Performance
New Distribution Class Arrester Ground Lead Disconnector Design Enhances Detonation Reliability and Improves Arrester Performance Dennis W. Lenk, Fellow, IEEE Abstract-- This paper examines performance
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
Ω POWEROHM RESISTORS, INC. Braking Resistors for Variable Frequency Drives APPLICATION SELECTING A STANDARD DESIGN CUSTOM RATINGS
Braking Resistors for Variable Frequency Drives APPLICATION AC variable frequency drives are commonly used with a general purpose AC induction motor to form a reliable variable speed drive system. For
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
Single Phase Soft Starter
Single Phase Soft Starter Installation & Operating Manual 6/02 Table of Contents Section 1 General Information................................................... 1 1 General Description................................................
C ole s quality Open Frame Instrument Rotary Switch provides low
OPEN FRAME series C ole s quality Open Frame Instrument Rotary Switch provides low contact resistance (.005W), very high contact reliability, smooth action with positive positioning, precision design,
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Low Voltage Products. Low Voltage Capacitor Banks Power Factor Correction Solutions
Low Voltage Products Low Voltage Capacitor Banks Power Factor Correction Solutions ABB LV Capacitor Banks The Most Comprehensive Solution for Automatic Power Factor Correction 2 ABB LV Capacitor Banks
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
Selection Guide for Conversion of Carbon Composition Resistors
Selection Guide for Conversion of Carbon Composition Resistors believes that the information described in this publication is accurate and reliable, and much care has been taken in its preparation. However,
Energy Saving ECM Motors and Fans. 2010 Ventilation Catalogue
Energy Saving ECM s and Fans 2010 Ventilation Catalogue CONTENTS For ellington, sustainability is about delivering products at competitive prices while preserving the environment for future generations.
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
E2 Series Electric Furnaces
E2 Series Electric Furnaces Service Manual Table of Contents Electrical Requirements... 10 Codes, Specifications Requirements... 10 Connection Supply Service Wires... 10 Furnace Sequence of Operation...
Avoiding AC Capacitor Failures in Large UPS Systems
Avoiding AC Capacitor Failures in Large UPS Systems White Paper #60 Revision 0 Executive Summary Most AC power capacitor failures experienced in large UPS systems are avoidable. Capacitor failures can
AC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
CATHODIC PROTECTION TRANSFORMER RECTIFIER (CPTR)
CATHODIC PROTECTION TRANSFORMER RECTIFIER (CPTR) Fig1. CPTR SMART CONTROL PRECISION CUSTOMIZED MANUAL OR AUTO SCR OR DIODE DRY TYPE SWITCH MODE DRY TYPE SCR OR DIODE OIL TYPE 1 INDEX PAGE 1. Cover 2. Index
Lead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc.
Lead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc. Abstract The technology for connecting lead and magnet wires for electric motors and electro mechanical devices
Schematic Mechanical Drawing Derating Curve. Input. Output. Product Catalogue
Input 1 Product Catalogue Single Phase SSR (24VAC) 1 ~ 4 Amps : DC Control, : Triac output 42.5 Series : 1 J/K 3 Input (+) & 4 Input (-) 1 & 2 35.6 25.5 57.75 28. 45. A = 3.2 C/W B = 1. C/W C & D =.5 C/W
Capacitors Age and Capacitors Have an End of Life. A White Paper from the Experts in Business-Critical Continuity TM
Capacitors Age and Capacitors Have an End of Life A White Paper from the Experts in Business-Critical Continuity TM Executive Summary This white paper discusses large DC aluminum electrolytic and AC polymeric
Table of Contents. The Basics of Electricity 2. Using a Digital Multimeter 4. Testing Voltage 8. Testing Current 10. Testing Resistance 12
Table of Contents The Basics of Electricity 2 Using a Digital Multimeter 4 IDEAL Digital Multimeters An Introduction The Basics of Digital Multimeters is designed to give you a fundamental knowledge of
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
Unarmored Variable Frequency Drive (VFD) Cable Termination Guide
Authorized Distributor Unarmored Variable Frequency Drive (VFD) Cable Termination Guide Be Certain with Belden A Step-by-Step Look at the Connection/Termination of Unarmored VFD Cables Terminating Unarmored
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
IRON-CORE REACTORS FOR DETUNING POWER CAPACITORS IN MEDIUM AND LOW VOLTAGE NETWORKS
IRON-CORE REACTORS FOR DETUNING POWER CAPACITORS IN MEDIUM AND LOW VOLTAGE NETWORKS ED DTR 06.11 Made in Germany H A N S V O N M A N G O L D T A A C H E N Harmonic network distortion and its effects (
Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
DISCRETE SEMICONDUCTORS DATA SHEET. BLF244 VHF power MOS transistor
DISCRETE SEMICONDUCTORS DATA SHEET September 1992 FEATURES High power gain Low noise figure Easy power control Good thermal stability Withstands full load mismatch Gold metallization ensures excellent
Technical Customer Documentation Technische Kunden Unterlage (TKU) 2TP 334 DO E0001. Keylock switches SPC 266
1 von 7 Part number V42266-...(see page 6) Description Keylock switch Last revision : No. page Description of Modification 00 Origin document Siemens Datasheet 01 01..2010 1-7 Take-over of the documents
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
Type EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options
Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low
3) What is the difference between "Insulating", "Isolating", and "Shielded Winding" transformers?
Tyco Electronics Corporation Crompton Instruments 1610 Cobb International Parkway, Unit #4 Kennesaw, GA 30152 Tel. 770-425-8903 Fax. 770-423-7194 1) What is a transformer and how does it work? A transformer
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Low Voltage Products. Low Voltage Capacitors Power Factor Correction Solutions
Low Voltage Products Low Voltage Capacitors Power Factor Correction Solutions Low Voltage Capacitors Reliability for Power Factor Correction Dry type design The ABB Low Voltage Capacitors, called CLMD,
SECTION 16461 DRY-TYPE TRANSFORMERS
SECTION 16461 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Furnishing and installation of and testing of cast resin dry type MV/LV distribution transformer in accordance with specifications and drawings. Any
Height w/o Terminals (in)
EaglePicher Technologies, LLC Commercial Power P.O. Box 47 Joplin, MO 6482 (417) 623-8 inquiry.carefree@eaglepicher.com Carefree Sealed Lead Acid (SLA) MSDS EaglePicher s Carefree lead acid batteries are
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
LOW COST MOTOR PROTECTION FILTERS FOR PWM DRIVE APPLICATIONS STOPS MOTOR DAMAGE
LOW COST MOTOR PROTECTION FILTERS FOR PWM DRIVE APPLICATIONS STOPS MOTOR DAMAGE Karl M. Hink, Executive Vice President Originally presented at the Power Quality 99 Conference ABSTRACT Motor protection
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
ARCO Electric Products Installation and Maintenance Manual Low Voltage Automatic Power Factor Correction Capacitor Systems 2013
ARCO Electric Products Installation and Maintenance Manual Low Voltage Automatic Power Factor Correction Capacitor Systems 2013 READ CAREFULLY These instructions are intended to cover good practices in
Ceramic Trimmer Capacitors
!Note T3E8.pdf 2.9.2 Ceramic Trimmer Capacitors TZB4 Series.±. Depth.5.4±. dia. Features. Miniature rectangular shape : 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identification of capacitance
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Diode Applications. As we have already seen the diode can act as a switch Forward biased or reverse biased - On or Off.
Diode Applications Diode Switching As we have already seen the diode can act as a switch Forward biased or reverse biased - On or Off. Voltage Rectifier A voltage rectifier is a circuit that converts an
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
HPS Universal. Single and Three Phase Potted. Buck-Boost Transformers. Buck-Boost Applications & Standard Specification... 80
Buck-Boost Transformers Single and Three Phase Potted Buck-Boost Transformers Buck-Boost Applications & Standard Specification... 80 Selecting Buck-Boost Transformers... 81 Single Phase Selection Tables...
Kit 106. 50 Watt Audio Amplifier
Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications
Miniature High-Torque, DC Servomotors and DC Gearmotors
typical applications Robotics Factory automation Medical equipment Computer peripherals and office equipment Portable, battery-operated equipment Textile machinery Packaging machinery Actuators Miniature
Secondary Unit Substations
14 SWITCHGEAR Secondary Unit Substations Overview Siemens offers a wide variety of unit substation designs to meet customer requirements. A unit substation consists of one or more transformers mechanically
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag: