MRS-MV. Module Multi-viewer& Router Large display ystem. Key Features

Transcription

1

2

3 MRS-MV Module Multi-viewer& Router Large display ystem Multi-format input combination selectable freely Up to 128 inputs,and three kinds of input cards: CVBS/SDI, 3G/HD/SD /CVBS, and HDMI input card Any source displaied on any screen in any size.position and any aspect ratio Every output resolutions is up to Dynamic UMDs &Tally from routers or Switchers Signal source format, AFD information and video&audio waveform overlay display Voice alarming of frozen or black video, video losing, audio silence and audio losing Built-in WebServer Support SNMP,TSL protical Support local timeing,ntp,gps serial timing Standard 9U frame with redundantedu hot plug power supply

4 MVS-X 1U Compact Module Multi-viewer system The MVS Series is a high-quality, multi-view display system with features such as multi-format input, audio monitoring, waveform display, real-time monitoring with voice alarm warnings, and dynamic UMD & tally from routers. Its module-based architecture provides 4 input format selections (CVBS/SDSDI/HDSDI/HDMI) with a 4xSD input card (auto-sensing CVBS/SDI/ASI), a 4xHD input card (autosensing HD/SD), and a 4xHDMI input card. Users can select different input formats and create up to a 21-image display system. The MVS Series supports HDMI/VGA or HDMI/HDSDI output with a max output resolution of 1920x1200P@60Hz. It also can accept LTC/ EBU, TSL and tally control information. SNMP and RS-232 control protocol are also built into the machine, allowing all configuration and operations to be done in 4 ways: web browser, SNMP, RS-232 or remote control panel. With its flexible, feature-rich platform, the MVS Series is widely-used in broadcasting and production editing studios and is ideal for many applications where video/audio monitoring and display are required! MVS Multi-format input combination selectable freely Three kinds of input cards: CVBS/SDI auto-sensing input card, HD/SD /CVBS auto-sensing input card, and HDMI input card Flexible output options 4:3, 16:9, customized aspect ratio Output resolutions, up to 1920x1200P@60HZ Selectable air timer and countdown timers, analog and digital clocks types Dynamic UMDs &Tally from routers or Switchers Input signal format and AFD information overlay display Support video/audio monitoring and custom throu Voice alarming of frozen or black video, video losing, audio silence and audio losing Audio VU meter and video full-screen output Built-in WebServer Support SNMP,TSL protical Support local timeing,ntp,gps serial timing Standard 1U frame with dural power supply 1U Compact Module Multi-viewer system 2 MVS-X

5 Any Source Input CVBS SD/HD/3G-SDI HDMI Up to 3 *4ch output CVBS/SDSDI/HDSDI/HDMI MVS Output resolution up to 1920*1200P 1U Compact Module Multi-viewer system MVS-X 3

6 Support TSL protocol Dynamitic UMD & Tally MVS Display Waveform Show Y waveform, PbPr waveform, vector, audio phase and audio waveform 1U Compact Module Multi-viewer system 4 MVS-X

7 Display AFD information & video format of input source Support voice alarm by SNMP protocol MVS 1U Compact Module Multi-viewer system MVS-X 5

8 Two kinds of alarm message: Alarm text and icon Alarm threshold, set by web Customize Layout MVS 1U Compact Module Multi-viewer system 6 MVS-X

9 Two Kinds of Remote panel of MVS-X: MVS-X-SRCP and MVS-X-RCP Serial Kinds of Timing: LTC, GPS and NTP timing Serial Kinds of Clock and Timer: Digital Timer, and analog clock, countdown timer and air timer MVS HDMI Input Module ISignal Input: Interface: 4*HDMI inputs, Type A Format: 576i 50, 480i p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Support HDMI signal with embedded audio and indicate 4 audio channels of Group1. Support HDCP protocol. 1U Compact Module Multi-viewer system MVS-X 7

10 SD Input Module ISignal Video Input: Interface: 4*CVBS/SD-SDI, BNC The rear of input module The mini audio and tally input modul CVBS input: Impedance: 75 ohms Return Loss:>40 db to 5.8 MHz Standard: NTSC/Pal SDI Input Impedance: 75 ohms Signal type:smpte295m (525/625 lines) Return Loss:>15 db to 270 MHz Signal Level: 800mV ±10% Overshoot: <80mV Jitter: <740ps Rising and Falling Time: <1500ps Rising and Falling Time Different: <500ps DC Level: 0V±500mV Audio Input Input interface: 3-pin connector balanced Input impedance: 600Ω Maximum input level:+24dbu (0dbFS) Sampling: 48 KHz Frequency 20Hz to 20 KHz SNR: >80dB MVS HD Input Module Tally input: Input interface: 3-pin Signal Video Input: Interface: 4*HD/SD-SDI, BNC 1U Compact Module Multi-viewer system The rear of input module The mini audio and tally input module HD-SDI input: Impedance: 75 ohms HD:SMPTE 292M;1.485,1.485/1.001Gb/s SMPTE-425;2.970Gps 720p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Return Loss: >15dB,5MHz to 1.5GHz SD-SDI Input Impedance:75 ohms Signal type:smpte295m (525/625 lines) Return Loss:>15 db to 270 MHz Signal Level: 800mV ±10% Overshoot: <80mV Jitter: <740ps Rising and Falling Time: <1500ps Rising and Falling Time Different: <500ps DC Level: 0V±500mV 8 MVS-X

11 Audio Input Input interface: 3-pin connector balanced Input impedance: 600Ω Maximum input level:+24dbu (0dbFS) Sampling: 48 KHz Frequency 20Hz to 20 KHz SNR: >80dB Tally input: Input interface: 3-pin VGA+HDMI Output Module The rear of 0utput module Signal Video Input: Interface: 1*HDMI, type A Format: 576i 50, 480i p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Support HDMI signal with embedded audio and indicate 4 audio channels of Group1. Support HDCP protocol. HDMI Output: Interface: 1*HDMI, type A Output resolutions: 1024x768x60p, 1280x720x60p, 1280x768x50p 1280x768x60p, 1280x1024x60p, 1360x768x60p 1366x768x60p, 1400x1050x60p, 1680x1050x60p 1600x1200x60p, 1920x1080x50p, 1920x1080x60p, 1920x1200x60p The HDMI output signal doesn t contain embedded audio, just video signal. MVS The mini VGA and audio output module VGA Output Interface: 1*VGA, DB15 Type: RGB Output resolutions: 1024x768x60p, 1280x720x60p, 1280x768x50p 1280x768x60p, 1280x1024x60p, 1360x768x60p 1366x768x60p, 1400x1050x60p, 1680x1050x60p 1600x1200x60p, 1920x1080x50p, 1920x1080x60p, 1920x1200x60p Audio Output Audio signal: 1*analog audio stereo Input interface: 1x3-pin connector, unbalanced Input impedance: 600Ω Maximum input level: +24dBu (0dbFS) Sampling: 48 KHz For embedded SDI signal input, it monitors 2 channels. For analog audio input, it monitors 1 channel. The audio channels can be selected on the Web server to monitor. Control Interface: 1*RJ45 Type: 10/100/1000M auto-adapting 1U Compact Module Multi-viewer system MVS-X 9

12 MVS HDSDI+HDMI Output Module Signal Video Input: Interface: 1*HDMI, type A Format: 576i 50, 480i p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Support HDMI signal with embedded audio and indicate 4 audio channels of Group1. Support HDCP protocol. The rear of 0utput module HDMI Output: Interface: 1*HDMI, type A Output resolutions: 1024x768, 1280x720, 1280x x1024, 1360x768, 1400x x1200, 1680x1050, 1920x1080, 1920x1200 Frequency: 50/60Hz Two channel HD/SD-SDI audio signals, eight channel HDMI audio signals, or one channel analog audio can be embedded into the HDMI output signal. The audio channels can be selected on the Web server to monitor. HDSDI Output Interface: 1*HD/SD-SDI, BNC Impedance: 75 ohms Format:SMPTE295M (525/625 lines) SMPTE 292M;1.485,1.485/1.001Gb/s SMPTE-425;2.970Gps 625i, 525i 720p 50/60; 1080i 50/60; 1080p 50/60; Return Loss:>15dB,5MHz to 1.5GHz The video and embedded audio signals are the same as HDMI output. Control Interface: 1*RJ45 Type: 10/100/1000M auto-adapting Ordering Information 1U Compact Module Multi-viewer system Model MVS-1U-CASE 1U chassis MVS-WUXGA MVS output module MVS-DWUXGA MVS output module MVS-SD MVS SD input module MVS-HD MVS HD input module Description 1RU/ smart network ready, dual power supplies (120W), 6 slots 1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + VGA/DVI outputs +audio monitoring, 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol support. 1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + HD/SD-SDI outputs (up to 1080P), 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol support. 4SDI/Composite (auto switching) video and 4 ch. Analog audio inputs, Tally interface, audio absence/silence/out-of-range detection, video freezing detection, EDH detection 4 HD-SDI/SDI (auto switching) video and 4 ch. Analog audio inputs, Tally interface, audio absence/silence/out-of-range detection, video freezing detection MVS-HDMI MVS HDMI input module 4 HDMI video w/ embedded audio inputs, de-embedded audio, Tally interface, audio absence/silence/out-of-range detection, video freezing detection 10 MVS-X

13 MVS-X-D 1U Compact Multi-viewer system with dual different outputs MVS-X-D is based on modular structure of MVS-X, which provides two high-quality individual outputs. This system is equipped with two output cards, and up to four input cards with which we can feed in 16 signals. Two outputs share all the signal sources with each other. Signal can be appointed to any output for display freely. There are HDMI and HDSDI dual output interfaces on each output card. The resolution of HDMI is up to 1920x1200, and the format of HDSDI is up to 1080p 60. MVS-X-D provides three kinds of input card: 4xSD input card (auto-sensing CVBS/SDI), 4xHD input card (auto-sensing HD/SD) and 4xHDMI input card. According to different application, it can build different display system in 1U frame, for example, 4 images, 8 images, 12 images or 16 images display system. MVS Series is a multi-view display system with rich features of high-quality, multi-format input, flexible and customizable functions, remote panel, audio monitoring, waveform display, real time monitoring and voice alarm warning, and dynamic UMD &tally from routers. It can be widely used in studio, broadcasting room, general control centre, production editing studio. The most flexible combination and feature-rich platform make it ideal for many applications where video/audio monitoring and display are required! MVS Provide high-quality dual outputs with flexible and individual configuration on each output Provide three kinds of input cards: CVBS/SDI auto-sensing input card, HD/SD auto-sensing input card, and HDMI input card According to the number and type of input card inserted 1U frame, build different Multi-viewer display system Signal can be displayed on any output flexibly and conveniently by configuration on the web server Multi-format input combination selectable freely Flexible output options;4:3, 16:9, customized aspect ratio; Editable dual program UMD and 4 channel audio meters display Provides several kinds of timer: air timer and countdown timers, analog and digital clocks types; Mark key signal/signals to find it/them rapidly in one complicated layout Support user-define the border color of each channel separately or cancel border display Dynamic UMDs &Tally from routers and Switchers via RS232 interface; Support format display of input signal and AFD information display; Video/audio auto detection and alarming, such as video loss, video frozen, video black, audio silence, audio overload with high rate of accuracy Two forms of alarm: text alarm and icon alarm Support SNMP Support customized layout to preset various layouts for different application, such as studio, OB van, production room and so on Standard 1U frame with Dural power supply 1U Compact Multi-viewer system with dual outputs MVS-X-D 11

14 Support TSL protocol Dynamitic UMD & Tally Display AFD information & video format of input signal MVS 1U Compact Multi-viewer system with dual outputs 12 Support SNMP Protocol Voice Alarm MVS-X-D

15 Customize Layout Serial Kinds of Timing: LTC, GPS and NTP timing Provide digital Timer, analog clock, countdown timer and air timer MVS Applications Studio MVS-X-D can be applied in Studio system with two individual outputs from single device. Meanwhile, signal source can be appointed to any output. MVS-X-D 13 1U Compact Multi-viewer system with dual outputs

16 Production Station MVS-X-D can be applied in Production station. Single device can be used in two different rooms for monitoring at same time. Meanwhile, signal source can be appointed to any output. Multi-media center MVS-X-D can be applied in multi-media control center. HDMI/DVI signal is supported by device. Two outputs can be spliced together for larger display. Any signal can be display across the screens. (Coming soon) MVS 1U Compact Multi-viewer system with dual outputs 14 MVS-X-D

17 Specification HDMI Input Module SD Input Module Signal Input: Interface: 4*HDMI inputs, Type A Format: 625i 50, 525i p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Support HDMI signal with embedded audio and indicate 4 audio channels of Group1. Support HDCP protocol. Signal Video Input: Interface: 4*CVBS/SD-SDI, BNC The rear of input module CVBS input: Impedance: 75 ohms Return Loss:>40 db to 5.8 MHz Standard: NTSC/Pal The mini audio and tally input module SDI Input Impedance: 75 ohms Signal type:smpte295m (525/625 lines) Return Loss:>15 db to 270 MHz Signal Level: 800mV ±10% Overshoot: <80mV Jitter: <740ps Rising and Falling Time: <1500ps Rising and Falling Time Different: <500ps DC Level: 0V±500mV MVS HD Input Module The rear of input module Audio Input Input interface: 3-pin connector balanced Input impedance: 600Ω Maximum input level:+24dbu (0dbFS) Sampling: 48 KHz Frequency 20Hz to 20 KHz SNR: >80dB Tally input: Input interface: 3-pin Signal type:3.3v~7v, high level Signal Video Input: Interface: 4*HD/SD-SDI, BNC HD-SDI input: Impedance: 75 ohms HD:SMPTE 292M;1.485,1.485/1.001Gb/s SMPTE-425;2.970Gps 720p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/30 MVS-X-D 15 1U Compact Multi-viewer system with dual outputs

18 1080p 50/59.94/60; Return Loss: >15dB,5MHz to 1.5GHz The mini audio and tally input module SD-SDI Input Impedance: 75 ohms Signal type:smpte295m (525/625 lines) Return Loss:>15 db to 270 MHz Signal Level: 800mV ±10% Overshoot: <80mV Jitter: <740ps Rising and Falling Time: <1500ps Rising and Falling Time Different: <500ps DC Level:0V±500mV Audio Input Input interface: 3-pin connector balanced Input impedance: 600Ω Maximum input level:+24dbu (0dbFS) Sampling: 48 KHz Frequency 20Hz to 20 KHz SNR: >80dB Tally input: Input interface: 3-pin Signal type:3.3v~7v, high level HDSDI+HDMI Output Module MVS The rear of 0utput module Signal Video Input: Interface: 1*HDMI, type A Format: 720p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Support HDMI signal with embedded audio and indicate 4 audio channels of Group1. Support HDCP protocol. 1U Compact Multi-viewer system with dual outputs 16 MVS-X-D HDMI Output: Interface: 1*HDMI, type A Output resolutions: 1024x768, 1280x720, 1280x x1024, 1360x768, 1400x x1200, 1680x1050, 1920x1080, 1920x1200 Frequency: 50/60Hz Two channel HD/SD-SDI audio signals, eight channel HDMI audio signals, or one channel analog audio can be embedded into the HDMI output signal. The audio channels can be selected on the Web server to monitor. HDSDI Output Interface: 1*HD/SD-SDI, BNC Impedance: 75 ohms Format:SMPTE295M (525/625 lines) SMPTE 292M;1.485,1.485/1.001Gb/s SMPTE-425;2.970Gps 625i, 525i 720p 50/60; 1080i 50/60;

19 1080p 50/60; Return Loss: >15dB,5MHz to 1.5GHz The video and embedded audio signals are the same as HDMI output. Control Interface: 1*RJ45 Type: 10/100/1000M auto-adapting Ordering Information Model MVS-1U-CASE 1U chassis MVS-DWUXGA MVS output module MVS-SD MVS SD input module MVS-HD MVS HD input module Description 1RU/ smart network ready, dual power supplies (120W), 6 slots 1 HDMI (up to 1080P) input, 1 HDMI (up to 1920x1200P 60Hz) + HD/SD-SDI outputs (up to 1080P), 10/100/1000M Ethernet, built-in Web Service and SNMP Protocol support. 4SDI/Composite (auto switching) video and 4 ch. Analog audio inputs, Tally interface, audio absence/silence/out-of-range detection, video freezing detection, EDH detection 4 HD/SD-SDI (auto switching) video and 4 ch. Analog audio inputs, Tally interface, audio absence/silence/out-of-range detection, video freezing detection MVS-HDMI MVS HDMI input module 4 HDMI video w/ embedded audio inputs, de-embedded audio, Tally interface, audio absence/silence/out-of-range detection, video freezing detection MVS MVS-X-D 17 1U Compact Multi-viewer system with dual outputs

20 MIO DEMUX-HDSDI 3G/HD/SD Signal & Analog Audio De-embedder MIO DEMUX-HDSDI is a kind of de-embedder based on Mini-Box chassis. It can extract one analog audio stereo signal from a single serial digital signal, and distribute 3 SDI outputs. It supports SD-SDI, 1.5 Gbps HD-SDI and 3.0 Gbps HD-SDI for inputs and outputs. MIO DEMUX-HDSDI supplies real-time input signal status indicator and power indicator which make it convenient to monitor. The deembedded audio channel can be selected though DIP Switch. one analog audio stereo signal extracted from a single serial digital signal Inputs and outputs for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI Support self-definition de-embedded audio channel via DIP Switch All audio interfaces adopt 3-PIN connector, balanced output Supply real-time input signal status indicator and power indicator Support bypass function with power on Easy to install, and can be widely used in broadcasting system, studios and other professional audio fields. MIO 3G/HD/SD Signal & Analog Audio De-embedder IDigital Video Input Jitter <0.2UI 100KHz Input interface 1*3G/HD/SD-SDI, BNC Analog Audio Output Impedance 75Ω Output interface 2*3pin balance ResolutionSD 525i 60, 625i 50 Impedance 600Ω HD: 720p 50/ i 50/60 Status Indicator 1080p 24/25/ p 50/60 Input signal status indicator Power indicator Digital Video Output Output interface 2*3G/HD/SD-SDI, BNC 1*3G/HD/SD-SDI Loop, BNC Power Power consumption 12VDC 1A Impedance 75Ω Size 123mm*92mm*29mm Signal Level 800mV±10% MIO EMB-SDI SD-SDI & Analog Audio Embedder MIO EMB-HDSDI 3G/HD/SD-SDI & Analog Audio Embedder MIO DEMUX-SDI SD-SDI & Analog Audio De-embedder MIO DEMUX-HDSDI 3G/HD/SD-SDI & Analog Audio De-embedder 18 MIO DEMUX-HDSDI

21 MIO DEMUX-SDI SD-SDI & Analog Audio De-embedde MIO DEMUX-SDI is a kind of de-embedder based on Mini-Box chassis. It can extract one analog audio stereo signal from a single serial digital signal, and distribute 3 SDI outputs, one of which provides loop-through with power down. And it supports auto-sensing input format of 525i60/625i50. MIO DEMUX-SDI supplies real-time input signal status and power indicators which make it convenient to monitor. The de-embedded audio channel can be selected though DIP Switch. one analog audio stereo signal extracted from a single serial digital signal Support auto-sensing input format of 525i60/625i50 Support self-definition de-embedded audio channel via DIP Switch All audio interfaces adopt 3-PIN connector, balanced output Supply real-time input signal status indicator and power indicator Support loop-through function with power down Easy to install, and can be widely used in broadcasting system, studios and other professional audio fields. Block Diagram MIO Digital Video Input Analog Audio Output Input interface 1*SD-SDI, BNC Output interface 2*3pin balance Impedance 75Ω Impedance 600Ω ResolutionSD 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Max audio level Status Indicator +24dBu Input signal status indicator Digital Video Output Power indicator Output interface 2*SD-SDI, BNC 1*SD-SDI Loop, BNC Power Power consumption 12VDC 1A Impedance 75Ω Size 123mm*92mm*29mm Level 800mV±10% Jitter <0.2UI (100 KHz) <1UI (10 Hz) MIO EMB-SDI SD-SDI & Analog Audio Embedder MIO EMB-HDSDI 3G/HD/SD-SDI & Analog Audio Embedder MIO DEMUX-SDI SD-SDI & Analog Audio De-embedder MIO DEMUX-HDSDI 3G/HD/SD-SDI & Analog Audio De-embedder SD-SDI & Analog Audio De-embedde MIO DEMUX-SDI 19

22 MIO EMB-HDSDI 3G/HD/SD Signal & Analog Audio Embedder The MIO EMB-HDSDI is designed to embed one analog audio stereo signal into a single serial digital signal and output 2 identical serial digital signals with embedded audio. It supports SD-SDI, 1.5 Gbps HD-SDI and 3.0 Gbps HD-SDI for inputs and outputs. Digital signals with embedded or non-embedded audio can be used as input signals. The MIO EMB-HDSDI supplies real-time input signal status indicator and power indicator making it convenient to monitor. The embedded audio channel can be selected with a DIP Switch. 1 analog audio stereo signal embedded into a single serial digital signal Inputs and outputs for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI Support self-definition embedded audio channel via DIP Switch All audio interfaces adopt 3-PIN connector, balanced input Supply real-time input signal status indicator and power indicator Support bypass function with power on Easy to install, and can be widely used in broadcasting system, studios and other professional audio fields. MIO 3G/HD/SD Signal & Analog Audio Embedder IDigital Video Input Analog Audio Input Input interface 1*3G/HD/SD-SDI, BNC Input interface 2*3pin balance Impedance 75Ω Impedance 600Ω Resolution SD: 525i 60, 625i 50 Status Indicator HD: 720p 50/ p 50/ p 24/25/30 Digital Video Output Input signal status indicator Power indicator Power Output interface 2*3G/HD/SD-SDI, BNC Power consumption 12VDC 1A 1*3G/HD/SD-SDI Loop, BNC Size 123mm*92mm*29mm Impedance 75Ω Level 800mV±10% Jitter <0.2UI 100KHz MIO EMB-SDI SD-SDI & Analog Audio Embedder MIO EMB-HDSDI 3G/HD/SD-SDI & Analog Audio Embedder MIO DEMUX-SDI SD-SDI & Analog Audio De-embedder MIO DEMUX-HDSDI 3G/HD/SD-SDI & Analog Audio De-embedder 20 MIO EMB-HDSDI

23 MIO EMB-SDI SD-SDI & Analog Audio Embedder The MIO EMB-SDI is designed to embed one analog audio stereo signal into a single serial digital signal and distribute it to 2 identical serial digital signals with embedded audio. Features include loop-through function with power down and auto-detection of input format (525i60/625i50). It can be applied to digital signals with both embedded and non-embedded audio for input. The MIO EMB-SDI supplies real-time input signal status indicator and power indicator, making it convenient to monitor. The embedded audio channel can be selected though a DIP Switch. One analog stereo audio signal embedded into a single serial digital signal Support auto-sensing input format of 525i60/625i50 Support self-definition embedded audio channels via DIP Switch All audio interfaces adopt 3-PIN connector, balanced input Supply real-time input signal status indicator and power indicator Support loop-through function with power down Easy to install Block Diagram MIO Digital Video Input Input interface 1*SD-SDI, BNC Impedance 75Ω Resolution SD: 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Digital Video Output Output interface 2*SD-SDI, BNC 1*SD-SDI Loop, BNC Impedance 75Ω Level 800mV±10% Jitter <0.2UI (100 KHz) <1UI (10 Hz) Analog Audio Input Input interface 2*3pin balance Impedance 600Ω Status Indicator Input signal status indicator Power indicator Power Power consumption 12VDC 1A Size 123mm*92mm*29mm SD-SDI & Analog Audio Embedder MIO EMB-SDI MIO EMB-HDSDI MIO DEMUX-SDI MIO DEMUX-HDSDI SD-SDI & Analog Audio Embedder 3G/HD/SD-SDI & Analog Audio Embedder SD-SDI & Analog Audio De-embedder 3G/HD/SD-SDI & Analog Audio De-embedder MIO EMB-SDI 21

24 MIO VDA 1x4 Analog composite video distribution amplifier Based on Mini BOX platform, MIO VDA is a high-quality distribution amplifier which can distribute one analog composite video signal to four analog composite video signals. For safety and reliability, one of the outputs provides loop through function with power down. And the device supports automatic input detection of NTSC and PAL standard. The LED lights on the Mini box indicate the status of input signal and power supply. There are the Gain and HS button installed on the box. When long distance transmission causes the input signal loss, by rotating the buttons, signal gain and amplitude of horizontal sync can be adjusted continuously to improve signal quality. One analog composite video signal input, four analog composite video signal outputs Support automatic input detection of NTSC and PAL standard Provide loop through function with power down via one of the outputs Adjust signal gain and amplitude of horizontal sync by rotating the Gain and HS button The LED lights on the Mini box indicate the status of input signal and power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO 1x4 Analog composite video distribution amplifier Analog Video Input Status indicator Input interface 1*CVBS BNC Input signal status indicator Impedance 75 ohms Power indicator Format PAL/NTSC (Indicate by shining or extinguishing of the green LED) Length 200 (Belden 8281) Power consumption Analog Video Output Power 12VDC 1.5A Output interface 4*CVBS, BNC Dimension 123mm*92mm*29mm Impedance 75 ohms Signal amplitude 1Vpp White level 0.7V H-sync level -0.3V MIO ADA Analog audio distribution amplifier, 1x4 MIO VDA Analog composite video distribution amplifier, 1x4 MIO VSD SDI signal distribution amplifier, 1x4 MIO VSD-RC SDI signal distribution amplifier with RC, 1x4 MIO VSD-HD HD/SD-SDI signal distribution amplifier with RC, 1x4 22 MIO VDA

25 MIO VSD 1x4 SDSDI signal distribution amplifier with Reclocking Based on Mini BOX platform, MIO VSD-RC is a high-quality distribution amplifier which can distribute one SDI signal to 4 outputs with reclocking. For safety and reliability, one of the outputs provides loop through function with power down. And the device supports SDI input signal with embedded audio and automatic input detection of 525i 60 and 625i 50 format. MIO VSD-RC provides automatic signal equalization for up to 300m (Belden 8281), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the Mini box indicate the status of input signal and power supply, in order to let the user know the status immediately. One SDI signal input, four SDI signal outputs with Reclocking Support automatic input detection of 525i 60 and 625i 50 format Support SDI signal with embedded audio Provide loop through function with power down via one of the outputs Adopt reclocking of video signals to provide an additional level of signal integrity in long cable length applications Provide signal equalization to improve the signal quality and reduce the signal loss caused by long distance transmission of input source The LED lights on the Mini box indicate the status of input signal and power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO Digital Video Input Fall time 1500PS 20%-80% Input interface 1*SDSDI BNC Jitter <0.2UI Impedance 75 ohms Status indicator Format 525i 60 / 625i 50 SMPTE 259M-C 270Mb/s Input signal status indicator Power indicator Length <300m (Belden 8281) (Indicate by shining or extinguishing of the green LED) Digital Video Output Power consumption Output interface 4* SDSDI, BNC Power: 12VDC 1A Impedance 75 ohms Dimension: 123mm*92mm*29mm Format SMPTE 259M-C 270Mb/s Level 800mV±10% Rise time 1500PS 20%-80% MIO ADA Analog audio distribution amplifier, 1x4 MIO VDA Analog composite video distribution amplifier, 1x4 MIO VSD SDI signal distribution amplifier, 1x4 MIO VSD-RC SDI signal distribution amplifier with Reclocking, 1x4 MIO VSD-HD HD/SD-SDI signal distribution amplifier with Reclocking, 1x4 1x4 SDSDI signal distribution amplifier with Reclocking MIO VSD-RC 23

26 MIO VSD-HD 1x4 HD/SD-SDI signal distribution amplifier with ReClocking Based on Mini BOX platform, MIO VSD-HD is a high-quality distribution amplifier which can distribute one HD/SD-SDI signal to 4 outputs with reclocking. And the device supports HD/SD-SDI input signal with embedded audio and automatic input detection of 525i 60, 625i 50, 720p, 1080i, and 1080p format. MIO VSD-HD provides automatic signal equalization for up to 100m (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the Mini box indicate the status of input signal and power supply, in order to let the user know the status immediately. One HD/SD-SDI signal input, four HD/SD-SDI signal outputs with Reclocking Support automatic input detection of 525i 60, 625i 50, 720p, 1080i, and 1080p format Support HD/SD-SDI signal with embedded audio Adopt reclocking of video signals to provide an additional level of signal integrity in long cable length applications Provide signal equalization to improve the signal quality and reduce the signal loss caused by long distance transmission of input source The LED lights on the Mini box indicate the status of input signal and power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO 1x4 Analog composite video distribution amplifier Digital Video Input Format SMPTE-259M-C 270Mb/s Input interface 1*HD/SD-SDI BNC SMPTE-292M 1.485Gps Impedance 75 ohms SMPTE Gps Format 525i 60, 625i p 50/ i 50/59.94/60 Level Jitter Status indicator 800mV±10% <0.2UI (100 KHz) 1080p 30/29.97/25/24/ p 50/59.94/60 Input signal status indicator Power indicator Length 100m (Belden 8281) (Indicate by shining or extinguishing of the green LED) Digital Video Output Power consumption Output interface 4* HD/SD-SDI, BNC Power 12VDC 1A Impedance 75 ohms Dimension 123mm*92mm*29mm MIO ADA Analog audio distribution amplifier, 1x4 MIO VDA Analog composite video distribution amplifier, 1x4 MIO VSD SDI signal distribution amplifier, 1x4 MIO VSD-RC SDI signal distribution amplifier with Reclocking, 1x4 MIO VSD-HD HD/SD-SDI signal distribution amplifier with Reclocking, 1x4 24 MIO VSD-HD

27 MIO ADA 1x4 Analog audio distribution amplifier The MIO AD-AUD is a high-quality, 24-bit analog to digital audio converter designed to convert 2 channels of analog audio stereo signals into 2 AES audio outputs. The device provides a variety of full-scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu). Analog audio adopts balanced mode, while digital audio adopts BNC interface with unbalanced mode. The left and right channels can be combined via a DIP switcher to form one AES signal. One channel analog audio signal input, four analog audio signal outputs Adopt 3-pin interface (balanced mode) for input and output Provide loop through function with power down via one of the outputs Adjust signal gain of audio outputs by rotating the Gain button The LED lights on the Mini box indicate the status of input signal and power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO Analog Audio Input Input signal 1*Analog Audio Interface 3-pin, balanced Impedance 600 ohms Frequency response 20 Hz-20 KHz <±0.25dB Analog Audio Output Output signal 4*Analog Audio Interface 3-pin, balanced Impedance 600 ohms Frequency response 20 Hz-20 KHz <±0.25dB Status indicator: Input signal status indicator Power indicator (Indicate by shining or extinguishing of the green LED) Power consumption: Power: 12VDC 1.5A Dimension: 123mm*92mm*29mm 1x4 Analog audio distribution amplifier MIO ADA MIO VDA MIO VSD MIO VSD-RC MIO VSD-HD Analog audio distribution amplifier, 1x4 Analog composite video distribution amplifier, 1x4 SDI signal distribution amplifier, 1x4 SDI signal distribution amplifier with RC, 1x4 HD/SD-SDI signal distribution amplifier with RC, 1x4 MIO ADA 25

28 MIO DA-AUD AES to analog audio converter The MIO DA-AUD is a high-quality, 24-bit converter designed to convert 2 AES signals to 2 analog audio stereo outputs. The device provides a variety of full scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu). Analog audio adopts balanced mode, while digital audio adopts BNC interface with unbalanced mode. Channels of AES can be combined flexibly to form the left and right channels of analog audio via a DIP switch. Two AES audio signals input, two analog audio stereo signals output Adopt BNC interface (unbalanced mode) for input and 3-pin interface (balanced mode) for outputs Adopts 24bit processing Combine two channels of AES flexibly to form the left and right channel of analog audio via DIP switcher Provide a variety of full scale standards (+18dBu/ +20dBu/ +22dBu/ +24dBu) The LED light on the Mini box indicate the status of power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO AES to analog audio converter Digital Audio Input Input signal 2*AES Interface BNC, unbalanced Standard AES3 (SMPTE 276M) Impedance 75 ohms Max Level 0dBFS Analog Audio Output Output signal 2*Analog Stereo Interface 3-pin, balanced Impedance 600 ohms Frequency 20Hz 20KHz THD+N 1KHz Status indicator Power indicator (Indicate by shining or extinguishing of the green LED) Power consumption Power 12VDC 1A Dimension 123mm*92mm*29mm MIO AD-AUD MIO DA-AUD Analog audio to AES converter AES to Analog audio converter 26 MIO DA-AUD

29 MIO AD-AUD Analog audio to AES converter Based on Mini BOX platform, MIO AD-AUD is a high-quality converter which can convert two analog audio stereo signals to two AES audio outputs. The device provides a variety of full scale standards for analog audio (+18dBu/+20dBu/+22dBu/+24dBu), which maximizes to meet the requirements of the clients around the world. Analog audio adopts balanced mode, while digital audio adopts BNC interface with unbalanced mode. MIO AD-AUD adopts 24bit processing to ensure high quality of audio signal after the conversion. The left and right channel can be combined flexibly via DIP switcher to form one AES signal. LED indicator is provided to show the status of power supply. Two analog audio stereo signals input, two AES audio signals output Adopt 3-pin interface (balanced mode) for input and BNC interface (unbalanced mode) for outputs Adopts 24bit processing Combine the left and right channel flexibly via DIP switcher to form one AES signal Provide a variety of full scale standards (+18dBu/ +20dBu/ +22dBu/ +24dBu) The LED light on the Mini box indicate the status of power supply Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Block Diagram MIO Analog Audio Input Input signal 2*Analog Stereo Interface 3-pin, balanced Impedance 600 ohms Frequency response20 Hz-20 KHz <±0.25dB Digital Audio Output Output signal 2*AES Interface BNC, unbalanced Standard AES3 (SMPTE 276M) Impedance 75 ohms Max Level 0dBFS Status indicator: Power indicator (Indicate by shining or extinguishing of the green LED) Power consumption Power 12VDC 1A Dimension 123mm*92mm*29mm Analog audio to AES converter MIO AD-AUD MIO DA-AUD Analog audio to AES converter AES to Analog audio converter MIO AD-AUD 27

30 MIO DEC Analog video to SDSDI mini converter The MIO DEC is a compact 1x2 analog video to SDI video converter. The MIO DEC converts one channel of analog video (CVBS/YUV/ YC) to two identical channels of SDI video, perfect for converting from analog HD/SD component, NTSC, or PAL. The output supports SDI video in both the 525i 60 & 625i 50 format. Known for its compact functioning, the MIO DEC is widely used in a variety of professional fields such as TV program post production, studios, broadcasting, etc. Analog video (CVBS/YUV/YC) to SDI video conversion Select the analog input (CVBS/YUV/YC) by DIP Switch Broadcast quality with 10 bit processing LED lights indicate the status of input signal and the power Be widely used in variety of environments Block Diagram MIO Analog video to SDSDI mini converter Analog video input Rise time 750~1500PS 20%-80% Input interface 3*BNC connection Fall time 750~1500PS 20%-80% (Selectable CVBS/YUV/YC input model) The difference between rise and fall: 500PS Impedance 75Ω Jitter <0.2UI System PAL/NTSC Status indicator Max cable length: 200M (Belden 8281) Input signal status indicator Digital video output: Power indicator(indicate by shining or extinguishing of the green Output interface 2*SDI, BNC connection LED) Impedance 75Ω Power consumption Format SMPTE 259M-C 270Mb/s 525i60/625i50 Powe Dimension 12VDC 1A 123mm*92mm*29mm Signal Level 800mV±10% MIO ENC SDI video to analog video converter MIO DEC Analog video to SDI video converter MIO ENC-AUD SDI to analog video and audio converter MIO DEC-AUD Analog video and audio to SDI video converter MIO ENC-HD-AUD 3G/HD/SD to analog video and audio converter MIO DEC-HD-AUD Analog video and audio to 3G/HD/SD video converter 28 MIO DEC

31 MIO DEC-AUD Analog video and audio to SDSDI mini converter The MIO DEC-AUD is a small, high-quality analog video to SDI video converter. The MIO DEC-AUD converts one channel of analog video (CVBS/YUV/YC) to two identical SDI video channels while embedding one analog stereo audio signal into each serial digital signal. The format of the input signal can be NTSC or PAL. The output supports SDI video in both the 525i 60 and 625i 50 formats. Known for its compact functioning, the converter is widely-used in TV program post production, studios, broadcasting, etc. Analog video (CVBS/YUV/YC) to SDI video conversion Select the analog input (CVBS/YUV/YC) by DIP Switch Adopt 3-pin interface as audio interface Broadcast quality with 10 bit processing and 48KHz audio sampling LED lights indicate the status of input signal and the powe Block Diagram MIO IAnalog video input 525i60/625i50 Input interface 3*BNC connection (Selectable CVBS/YUV/YC input model) Signal Level Rise time 800mV±10% 750~1500PS 20%-80% Impedance 75Ω Fall time 750~1500PS 20%-80% System PAL/NTSC The difference between rise and fall: 500PS Max cable length 200M (Belden 8281) Jitter <0.2UI Analog audio Input Status indicator Input interface 2*3pin (Balanced) Input signal status indicator Impedance 600Ω Power indicator (Indicate by shining or extinguishing of the green Digital video output LED) Output interface 2*SDI, BNC connection Power consumption Impedance 75Ω Power: 12VDC 1A Format SMPTE 259M-C270Mb/s Dimension: 123mm*92mm*29mm MIO ENC SDI video to analog video converter MIO DEC Analog video to SDI video converter MIO ENC-AUD SDI to analog video and audio converter MIO DEC-AUD Analog video and audio to SDI video converter MIO ENC-HD-AUD 3G/HD/SD to analog video and audio converter MIO DEC-HD-AUD Analog video and audio to 3G/HD/SD video converter Analog video and audio to SDSDI mini converter MIO DEC-AUD 29

32 MIO ENC-HD-AUD 3G/HD/SD to analog video and audio converter Based on Mini BOX platform, MIO ENC-HD-AUD is a small converter which can convert 3G/HD/SD-SDI to one channel optional CVBS/ YUV/YC, and supports the input format of 525i 60, 625i 50, 720p, 1080i and 1080p. It can extract one analog audio stereo signal from a single serial digital signal. It provides SDI Loop-out to extend other application. The de-embedded audio channels and analog video output mode can be selected through DIP Switch. The LED lights on the Mini box indicate the status of input signal and power, so as to let the user know the information immediately. Input signal for SD-SDI, 1.5Gb/s HD-SDI and 3.0Gb/s HD-SDI one analog audio stereo signal extracted from a single serial digital signal Select the mode of analog output (CVBS/YUV/YC) freely via DIP Switch Support self-defined de-embedded audio channel via DIP Switch All audio interfaces adopt 3-PIN connector, balanced output Supply real-time input signal status indicator and power indicator Block Diagram MIO 3G/HD/SD to analog video and audio converter Digital Video Input SMPTE-292M 1.485Gps Input interface 1*3G/HD/SD-SDI, BNC connection SMPTE Gps Impedance 75Ω Format 525i 59.94, 625i p 50/59.94, 1080i 50/ p 50/59.94 Analog video Output Output interface 3*BNC connection (Can be set as CVBS/YUV /YC output mode) Impedance 75Ω Digital video loop output Output interface 1*3G/HD/SD-LOOP, BNC connection Impedance 75Ω Format SMPTE 259M-C 270Mb/s MIO ENC SDI video to analog video converter MIO DEC Analog video to SDI video converter MIO ENC -AUD SDI to analog video and audio converter MIO DEC-AUD Analog video and audio to SDI video converter MIO ENC-HD-AUD 3G/HD/SD to analog video and audio converter MIO DEC-HD-AUD Analog video and audio to 3G/HD/SD video converter Eye pattern 800mV±10% Jitter <0.2UI Analog audio output Output interface 2*3pin (Balanced) Impedance 600Ω Status indicator Input signal status indicator; Power indicator (Indicate by shining or extinguishing of the green LED) Power consumption Power 12VDC 1 A Dimension 123mm*92mm*29mm 30 MIO ENC-HD-AUD

33 MIO ENC SDI to analog video converter Based on Mini BOX platform, MIO ENC converts SDI signal to analog video signal. The analog video output can be selected as the output mode of CVBS, YUV, or YC optionally via DIP switch, also NTSC/PAL for output are supported. MIO ENC provides auto-sensing input format of 525i60/625i50. It provides SDI-Loop output to extend other application. The LED lights indicate the status of input signal and power. Be known for compact function, the converter is widely used in variety of environments, like TV program post production, studio, broadcast, etc. Convert SDI to analog video effectively with high quality CVBS/YUV/YC are selected optionally by DIP Switch on side of box Support NTSC/PAL for output Broadcast quality with 10 bit processing LED lights indicate the statues of input signal and power Block Diagram MIO Digital Video Input Input interface 1*SDI, BNC connection Impedance: 75Ω Format 525i 60/ 625i 50 Jitter <0.2UI 100KHz Analog video Output Output interface 3*BNC connection (Can be set as CVBS/YUV /YC output mode) Impedance 75Ω Digital video output Output interface 1*SDI-Loop, BNC, 75Ω Format SMPTE 259M-C 270Mb/s Eye pattern 800mV±10% Jitter <0.2UI 100KHz The difference between rise and fall: 500PS Status indicator Input signal status indicator; Power indicator (Indicate by shining or extinguishing of the green LED) Power consumption Power 12VDC 1 A Dimension 123mm*92mm*29mm SDI to analog video converter MIO ENC MIO DEC MIO ENC -AUD MIO DEC-AUD MIO ENC-HD-AUD MIO DEC-HD-AUD SDI video to analog video converter Analog video to SDI video converter SDI to analog video and audio converter Analog video and audio to SDI video converter 3G/HD/SD to analog video and audio converter Analog video and audio to 3G/HD/SD video converter MIO ENC 31

34 MIO ENC-AUD SDSDI to analog video and dual analog audio converter Based on Mini BOX platform, MIO ENC-AUD converts SDI to analog video and two channel analog audio. The analog video output can be selected as the output mode of CVBS, YUV, or YC optionally via DIP switch, also NTSC/PAL for output are supported. MIO ENC provides auto-sensing input format of 525i60/625i50. It provides SDI-Loop output to extend other application. The LED lights indicate the status of input signal and power. Be known for compact function, the converter is widely used in variety of environments, like TV program post production, studio, broadcast, etc. Select the mode of analog output (CVBS/YUV/YC) freely via DIP Switch Support NTSC/PAL for output Broadcast quality with 10 bit processing Support self-defined de-embedded audio channel via DIP Switch LED lights indicate the statues of input signal and power Block Diagram MIO SDSDI to analog video and dual analog audio converter Digital video output: Output interface: 1*SDI-LOOP, BNC 75Ω Status indicator: Format: SMPTE 259M-C;270Mb/s Input signal status indicator ; Eye pattern: 800mV±10% Power indicator (Indicate by shining or extinguishing Rise time: 750~1500PS(20%-80%) of the green LED) Fall time: 750~1500PS(20%-80%) The difference between rise and fall: 500PS Power consumption: Jitter: <0.2UI Power: 12VDC 1 A Dimension: 123mm*92mm*29mm Analog audio output: Output interface: 2*3pin (Balanced) Impedance: 600Ω MIO ENC SDI video to analog video converter MIO DEC Analog video to SDI video converter MIO ENC -AUD SDI to analog video and audio converter MIO DEC-AUD Analog video and audio to SDI video converter MIO ENC-HD-AUD 3G/HD/SD to analog video and audio converter MIO DEC-HD-AUD Analog video and audio to 3G/HD/SD video converter 32 MIO ENC-AUD

35 MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDMI-CEXT is a DVI/HDMI coaxial cable extender, which is compose of a transmitter and receiver. The transmitter converts the DVI/HDMI signal to serial data and transmits it via a coaxial cable with BNC interface; the receiver receives the serial data and recovers the original DVI/HDMI signal with high quality eventually. This extender avoids the serious issue of signal loss caused by a long DVI/ HDMI cable for long-distance transmission. The maximum transmission distance is 100m (Belden 1694A). MIO HDMI-CEXT supports DVI/HDMI input formats of 525i, 625i, 720p, 1080i, and 1080p. Although the device adopts DVI interface, the HDMI signal with embedded audio also can be transmitted by using a DVI-to-HDMI adapter or cable, and the original signal, especially the embedded audio, is recovered through the receiver with HDMI interface. Support DVI/HDMI input formats of 525i, 625i, 720p, 1080i, and 1080p, and automatic input rate detection Extend DVI/HDMI signal up to 100m (Belden 1694A) without distortion Support transmission of the HDMI signal with embedded audio Adopt a coaxial cable with BNC interface to transmit the data safely Provide a loop-out interface by receiver Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields MIO HDMI-CEXT-T MIO HDMI-CEXT-R MIO HDMI-CEXT-T Input Input interface 1*DVI-I (digital signal), Female Resolution supports the resolutions as following: SD:625i 50, 525i 60; HD:720P 50/59.94/60, 1080I 50/59.94/60, 1080P 30/29.97/25/24/23.98, 1080P 50/60 Output Output interface 1* coaxial cable, BNC connector Physical characteristics Power: 12VDC 1A Size: 123mm*92mm*29mm MIO HDMI-CEXT-R Input Input interface 1* coaxial cable, BNC connector Max distance 100 meters Belden 1694 Output Output interface 1*cable loop out, BNC connector 1*DVI-I (digital signal), Female Physical characteristics Power 12VDC 1A Size 123mm*92mm*29mm MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO AV-DVI/HDMI Analog AV to DVI/HDMI converter with network and video & audio monitoring MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO DVI/HDMI signal coaxial cable extender MIO HDMI-CEXT 33

36 MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDSDI-HDMI is a high-quality video and audio converter which can convert HD/SD-SDI signal to DVI or HDMI signal for digital display devices, such as LCD, DLP, and Plasma. We can adjust output resolution and audio channel by DIP switch on the one side of box. MIO HDSDI-HDMI supports HD/SD-SDI input formats of 525i, 625i, 720p, 1080i, and 1080p. It provides SDI-Loop output to extend other applications. Although the device adopts DVI output interface, the HDMI signal can be obtained by using a DVI to HDMI adapter or cable. In HDMI mode, the SDI audio are embedded into HDMI signal. Convert HD/SD-SDI signal to high-quality DVI or HDMI signal Support HD/SD-SDI input formats of 525i, 625i, 720p, 1080i, and 1080p select and automatic input rate detection Output resolution adjustable by DIP switch Support embedded audio HDMI output via DVI interface with the DVI to HDMI adapt Provides SDI-Loop output to extend other applications Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields MIO HD/SD-SDI to DVI/HDMI converter Input Input interface 1* HD/SD-SDI, BNC Output Output interface 1 HD/SD-SDI Loop output Impedance 75 ohms 1*DVI-I (digital signal), female Standard SMPTE-259M-C 270Mb/s SMPTE-292M 1.485Gps SMPTE Gps DVI output resolution 1024x x x x x x x x x x x1050 Format 480i i p 50/59.94/ i 50/59.94/ P 50/59.94/ x x1200 AUTO mode Physical characteristics Length 100m (Belden 1694A) Power 12VDC 1A Size 123mm*92mm*29mm MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO AV-DVI/HDMI Analog AV to DVI/HDMI converter with network and video & audio monitoring MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring 34 MIO HDSDI-HDMI

37 MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO HDMI-HDSDI is a high-quality video and audio converter which can convert DVI or HDMI signal to HD/SD-SDI signal. The entire conversion doesn t need any configuration so that the operation is very convenient. It provides one HD/SD-SDI output with clear eye pattern and other high-quality signal specifications.we can adjust output format channel by DIP switch on the one side of box MIO HDMI-HDSDI supports output formats of 525i, 625i, 720p, 1080i, and 1080p. Although the device adopts DVI interface, the HDMI signal with embedded audio also can be processed by using a DVI-to-HDMI adapter or cable. And the HDMI audio are embedded into the HD/SD-SDI output. Convert DVI or HDMI signal to high-quality HD/SD-SDI signal Support DVI/HDMI input up to 1920*1200P and automatic input rate detection Output format adjustable by DIP switch,480i 59.94/576i 50/720p/1080i/1080p selectable Support HDMI signal with embedded audio and output embedded HD/SD-SDI Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields MIO High quality SDI signal output Input Input interface 1*DVI-I, Female Resolution 1024x x x x x x x x x x x x x1200 Output Output interface 1* HD/SD-SDI, BNC interface Impedance 75 ohms Standard SMPTE-259M-C 270Mb/s SMPTE-292M 1.485Gps SMPTE Gps Format 480i i p 50/59.94/ i 50/59.94/ P 50/59.94/60 Level 800mV±10% Jitter <0.2UI (100 khz) Physical characteristics Power 12VDC 1A Size 123mm*92mm*29mm MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO AV-DVI/HDMI Analog AV to DVI/HDMI converter with network and video & audio monitoring MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring DVI/HDMI to HD/SD-SDI converter MIO HDMI-HDSDI 35

38 MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with video & audio monitoring Based on Mini BOX platform, MIO HDSDI-DVI/HDMI is a high-quality video and audio converter which can convert one HD/SD-SDI signal to DVI or HDMI signal for digital display devices, such as LCD, DLP, LED,and Plasma, with output two channel analog audio signals optional. MIO HDSDI-DVI/HDMI can be controlled by Ethernet network via IE browser, which is convenient to configure the display parameters. The device provides various output resolutions and audio and video detection, such as signal loss, signal freeze, audio silence and so on. The UMD can be and defined freely. And it supports Tally,AFD.waveformand audio meters display. Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Provide various output resolutions up to 1920x1080px60 Provide audio and video monitoring and alarm, such as signal loss, signal freeze, audio silence and so on Support UMD display of program and edit the UMD content freely Build-in web server to control the device with user-friendly interface Support tally and audio meters display Support several display mode: 4:3, 16:9, and full screen MIO HDSD-SDI to DVI/HDMI converter with video & audio monitoring Video Input Input interface 1* HD/SD-SDI, BNC 75 ohms Standard SMPTE-259M-C 270Mb/s SMPTE-292M 1.485Gps SMPTE Gps Format 480i i p 50/ i 50/ P 50/60 Length 100m (Belden 1694A) Video Output Output interface 1*DVI-I, female Resolution 1024x768x60p, 1280x768x50p 1280x768x60, 1280x1024x60p 1280x720x60p, 1360x768x60p 1366x768x60p, 1400x1050x60p 1600x900x60p, 1600x1200x60p 1920x1080x50p, 1920x1080x60p Optional Analog Audio Output interface 2*RCA Max lever +24dBu GPI RCA, Tally (high level 3.3VDC) Control Ethernet network RJ45, 10/100/1000M Physical characteristics Power 12VDC 1A Size 123mm*92mm*29mm MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO AV-DVI/HDMI Analog AV to DVI/HDMI converter with network and video & audio monitoring MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring 36 MIO HDSDI-DVI/HDMI

39 MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with video & audio monitoring Based on Mini BOX platform, MIO SDI-DVI/HDMI is a high-quality video and audio converter which can convert one SDSDI signal to DVI or HDMI signal for digital display devices, such as LCD, DLP, and Plasma, and output two channel analog audio signals. MIO SDI-DVI/HDMI can be controlled by Ethernet network via IE browser, which is convenient to configure the display parameters. The device provides various output resolutions and audio and video detection, such as signal loss, signal freeze, audio silence and so on. The UMD content of program can be defined freely. And it supports Tally and audio meters display. Mini box structure easily installed inside frame racks, video walls and so on Widely used in broadcasting system, studios and other professional fields Provide various output resolutions up to 1920x1080px60 Provide audio and video monitoring and alarm, such as signal loss, signal freeze, audio silence and so on Support UMD display of program and edit the UMD content freely Build-in web server to control the device with user-friendly interface Support tally and audio meters display Support several display mode: 4:3, 16:9, and full screen Video Input Input interface 1* SD-SDI, BNC 75 ohms Standard SMPTE-259M-C 270Mb/s Format 480i i 50 Length 100m (Belden 1694A) Video Output Output interface 1*DVI-I, female Resolution 1024x768x60p, 1280x768x50p 1280x768x60, 1280x1024x60p 1280x720x60p, 1360x768x60p 1366x768x60p, 1400x1050x60p 1600x900x60p, 1600x1200x60p 1920x1080x50p, 1920x1080x60p Optional Analog Audio Output interface 2*RCA Max lever +24dBu GPI RCA, Tally (high level 3.3VDC) Control Ethernet network RJ45, 10/100/1000M Physical characteristics Power 12VDC 1A Size 123mm*92mm*29mm MIO HDMI-CEXT DVI/HDMI signal coaxial cable extender MIO HDSDI-HDMI HD/SD-SDI to DVI/HDMI converter MIO HDMI-HDSDI DVI/HDMI to HD/SD-SDI converter MIO SDI-DVI/HDMI SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO AV-DVI/HDMI Analog AV to DVI/HDMI converter with network and video & audio monitoring MIO HDSDI-DVI/HDMI HD/SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO SD-SDI to DVI/HDMI converter with network and video & audio monitoring MIO SDI-DVI/HDMI 37

40 VIO DCO 2CH HD/SD SDI Signal Auto Change Over VIO DCO is an SDI auto change over which can monitor 2channels SD SDI input signals (Main/Backup), and switches automatically to the subordinated one when the current selected output channel going wrong. The VIO DCO automatically switches according to the following conditions, such as signal loss/abnormal or missing of Sync signal,etc. It supplies voice and light alarm which will awake the operator to deal with the accident. The remote control panel for it also is supported, the operator can go with it more easily. The SNMP and RS-232 control protocol are also built in the machine. All the configuration and operation can be done by many ways, which are MCU on front panel, browser, SNMP and RS bit high quality digital processing fully compatible with standard and hd signal Support embedded SDI signal Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Support real-time signal loss detecting and channel quality detection Support automatic and manual signal switching Supply different voices and volumes for kinds of alarm types Real-time remote control and monitor Many control ways: front panel MCU, RCP, IE browser, and RS-232 supprt SNMP Standard 1U frame with redundant PSU unites and fans Block Diagram VIO 2CH SD/HD SDI Signal Auto Change Over Reference Signal style Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Input interface 1*BNC, 75Ω Output interface: 1*BNC loop output SDI Input/l output Input number 2*SDI, BNC Output number 2*SDI, BNC, (one is bypass ) Signal Formats SMPTE 259M270Mb/s SMPTE 292M; 1.485Gb/s Contrl Interface Network 1*RJ M Enternet GPI 2*GPI Serrial 1*DB15 RS232 MCU on front control panel Output alarm configuration/sync alarm configuration Status director PSU LED Physics Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO DCO-SD VIO DCO-HD VIO DCO-RCP 2 CH SD-SDI signal auto change over 2CH HD/SD-SDI signal change over Remote control panel for VIO DCO 38 VIO DCO

41 VIO DSK Dual ch. HD/SD-SDI downstream keyer VIO DSK is a high definition downstream keyer to mix the serial component digital key and fill HD signals from logo generators or/and character generator machines in HD living program. It incorporates the latest technology to provide an advanced fully digital keyer. VIO DSK provides SDI output for preview, two SDI program outputs which one is bypass output without power supply. Remote control panel going together with it will be putted on the operator desk so users can control keys down or up freely and easily. VIO DSK is ideal for the "On-Air" environment. The SNMP and RS-232 control protocol are built in the machine. All the configuration and operation can be done by three ways, which are MCU on front panel,ie on PC and remote control panel. 20 bit signal processing Program output bypass protected for on-air applications Supply clean output and preview output Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Auto-timing key, fill, and background inputs (up to 1 line) Supply GPI and RS-232/422 control interface Supply RCP for remote control Full control and status is provided from the front panel display Built-in Web Server Support SNMP Standard 1U frame Redundant PSU unites and fans Block Diagram VIO Reference Signal style Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Input interface 1*BNC, 75Ω Output interface: 1*BNC loop output Video(PGM) input Input interface 1* HD/SD-SDI, BNC, 75Ω Video output Output interface 4*HD/SD-SDI, BNC, 75Ω (2*PGM utput,one is bypass) (1*clean output and 1*preview utput) Digital (FILL) video input Input interface 2*HD/SD-SDI, BNC, 75Ω Digital (KEY) video input Input interface Video format SMPTE 259M 270Mb/s SMPTE 292M; 1.485Gb/s Contrl Interface Network GPI Serrial Power 2*HD/SD-SDI, BNC, 75Ω 1*RJ M Enternet 2*GPI 1*DB15 RS232 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm 2CH Dual SD ch. SDI HD/SD-SDI Signal Auto keyer Change Over VIO DSK-HD VIO DSK-SD VIO DSK-RCP Dual ch. HD/SD-SDI keyer Dual ch. SD-SDI keyer Dual ch. HD/SD-SDI keyer remote control panel VIO DSK 39

42 VIO DLK Dual ch. HD/SD-SDI keyer and logo insert VIO DLK series is a complete HD/SD Keyer with inner Logo insertion that will key one-or more (up to 4) static/animated "bugs" over an HD or SD video signal. It has a built-in web server, through the Internet explorer browser, user can create logos via importing TGA\TAG series\avi\mov etc format pictures. The size of each logo is variable and ranges from 1/25th to full screen. The position and transparency of the logo are programmable. VIO DLK provides SDI output for preview, two SDI program outputs which one is bypass output without power supply. Remote control panel going together with it will be putted on the operator desk so users can control keys down or up freely and easily. VIO DLK is ideal for the "On-Air" environment. Embedded HD/SD SDI compatible 20 bit processing 100% linear keying with adjustable transparency upply clean output and preview output EDH inserted on program output Auto timing of program, key and fill Supply GPI and RS-232/422control interface,ltc timing Supply RCP for remote control Full control and status is provided from the front panel display Built-in Web Server Support SNMP Standard 1U frame with redundant PSU unites and fans Block Diagram VIO 2CH SD/HD SDI Keyer and logo insert Reference Signal style Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Input interface 1*BNC, 75Ω Output interface: 1*BNC loop output Video(PGM) input Input interface 1* HD/SD-SDI, BNC, 75Ω Video output Output interface 4*HD/SD-SDI, BNC, 75Ω (2*PGM utput,one is bypass) (1*clean output and 1*preview utput) Digital (FILL) video input Input interface 2*HD/SD-SDI, BNC, 75Ω Digital (KEY) video input Input interface Video format SMPTE 259M 270Mb/s SMPTE 292M; 1.485Gb/s Contrl Interface Network GPI Serrial LTC Power 2*HD/SD-SDI, BNC, 75Ω 1*RJ M Enternet 2*GPI 1*DB15 RS232 1*XLR 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO DLK VIO DLK-RCP Dual ch. HD/SD-SDI keyer & logo generator Dual ch. HD/SD-SDI keyer & logo generator remote control panel 40 VIO Keyer-HDL

43 VIO DLG HD/SD-SDI logo generator series VIO DLG series is a high performance and cost-effective HD/SD-SDI logo generator. With 128 Mbytes memory, it can store 1-4 fullbandwidth logos uncompressed 4:2:2 quality still and/or motion logos with its own luminance key channel. It has a built-in web server, through the IE browser in control PC, user can create logos via importing TGA series MOV etc format pictures. The size of each logo is variable and ranges from 1/25th to full screen. The position of the logo is programmable. The SNMP and RS-232 control protocol are also built in the machine. All the configuration and operation can be done by four ways, which are MCU on front panel, browser, SNMP and RS bit processing, full-bandwidth HDSDI video format Uncompressed 4:2:2 still or motion logo Up to four static and/or motion bugs display simultaneously LTC/EBU time correction with the system main clock Position \size\ of logos changed freely and conveniently by Web UI Four control modes: front panel MCU, IE browser, SNMP and RS-232 Support Tri-Level Sync. or NTSC/PAL Bi-Level Sync Real-time remote control and monitor Standard 1U frame, Redundant PSU unites and fans Block Diagram VIO Reference Signal style Tri-Level Sync. or NTSC/PAL Bi-Level Sync. Input interface 1*BNC, 75Ω Output interface: 1*BNC loop output Digital (FILL) video output Output interface 2*HD/SD-SDI, BNC, 75Ω Format SMPTE 259M 270Mb/s SMPTE 292M; 1.485Gb/s Digital (KEY) video output Output interface 2*HD/SD-SDI, BNC, 75Ω Format SMPTE 259M 270Mb/s SMPTE 292M; 1.485Gb/s Inner Setting Image phase adjustment: H/V Key delay White/black key 0-32 pixel white/black Step length 1/5/10/50/100 Status director: LCD display, LOGO and menu Contrl Interface Network GPI Serrial LTC 1*RJ M Enternet 2*GPI 1*DB15 RS232 1*XLR Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm HD/SD-SDI logo generator series VIO DLG-SD VIO DLG-HD SD-SDI logo generator SD/HD-SDI logo generator VIO DLG 41

44 VIO ALC HD/SD digital automatic loudness controller The VIO ALC is a new product for HD/SD-SDI embedded audio amplitude control. The VIO ALC adopts advanced automatic amplitude processing and advanced technology for reducing and eliminating audio noise. It automatically keeps valid audio data within a required range. The VIO ALC is useful for dealing with amplitude problems in various occasions such as audio jumping between different programs. Advanced FPGA + DSP processing technology Based on ITU-R BS1770 standard Support the resolut ion of 480i 60, 576i 50, 720P,1080i and 1080P Support SDI signal with embedded audio Up to 8 channels of audio processing with embedded audio Support signal loop-out when power off Unique technology of noise reduct ion. Loudness control only to valid data Two control modes, auto mode for automat ic control of audio loudness, manual mode for customize adjustment of audio gain Support SNMP protocol and Web server monitor Monitor audio waveform and phase before and after processing from DVI interface Adopt RS485 to connect VIO ALC and RCP with a coaxial cable Two high quality of speakers and head phone conf igured on RCP, adjustable audio volume via knobs 1U chassis structure, redundant power and fan designed Application VIO HD/SD digital automatic loudness controller VIO ALC and VIO RCP-A front and back VIO ALC host front and back VIO RCP-A remote control pannel front and back 42 VIO ALC

45 Waveform monitoring and Web monitoring VIO ALC-HD Professional audio waveform and phase display before and after loudness control from DVI output Web server monitoring the status of video and audio signal, the audio PPM before and after loudness control VIO ALC-HD Signal Input Input 1xHD/SD-SDI, BNC, 75ohm Standard SMPTE 292M 1.5Gbit/s SMPTE 259M 270Mbit/s Length 1.5Gb/s 270Mb/s with Belden 1694A Signal Output Output Interface 3xHD/SD-SDI, BNC, 75ohm (2 after-loudness-control outputs,which one for loop-out without power, 1 HD/SD-SDI loop) Standard SMPTE 292M1.5Gbit/s SMPTE 259M 270Mbit/s Control Interface RS-485, BNC, No parity Bit Baud rate based on protocol RJ45, 1000MBase T Ethernet Parameter range 0~30dB adjustable Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO ALC-SD Signal Input Input 1xSD-SDI, BNC, 75ohm Standard SMPTE 259M 270Mbit/s Length 300m with Belden 1694A Signal Output Output Interface 3xSD-SDI, BNC, 75ohm (2 after-loudness-control outputs1 of 2 for loop-out without power, 1 HD/SD-SDI loop) Standard SMPTE 259M 270Mbit/s Control Interface RS-485, BNC, No parity Bit Baud rate based on protocol RJ45, 1000MBase T Ethernet Parameter range 0~30dB adjustable Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO RCP-A Audio input Inpu 2x analog audio stereo (One for AUX audio in) Interface 3pin, balanced Parameter range The range of loudness control0~30db adjustable Control Interface RCP controlrs-485, BNC,no parity bit, Baud rate based on protocol Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO HD/SD digital automatic loudness controller VIO ALC-SD VIO ALC-HD VIO RCP-A VIO AM-SD VIO AM-HD SD digital audio loudness controller HD/SD digital audio loudness controller VIO ALC/DAP universal remote panel, with speakers Analog/AES/SD embedded digital audio monitor Analog/AES/HD/SD embedded digital audio monitor VIO ALC 43

46 VIO AM Audio monitor The VIO AM can monitor SDI embedded audio, analog audio stereo signal, and AES signal at the same time with two independent highquality speakers. The speakers can be configured to monitor any input audio source. The VIO AM is an ideal solution for in-studio audio monitoring. Monitor various kinds of audio signals: analog audio, AES, and SDI embedded audio Support up to 16 channels for SDI embedded audio, one analog audio stereo signal, and 2 AES Two high quality of speakers and head phone on the front panel, adjustable audio volume and L/R balance via knobs Set the audio source to monitor manually though buttons on the front panel Display audio PPM directly on the front panel Real time EDH detection and alarm indicated by LED indicator Based on 1U chassis structure, redundant power and fan designed Application VIO Anudio monitor The speakers can be configured to monitor the identical audio channel or the audio channelsfromcompletely different audio source. For example, one speaker is set to monitor one channel of AES;meanwhile another is set to monitor one channel of Analog audio. Application 44 VIO AM

47 VIO AM-HD Video Signal Input Input 1xHD/SD-SDI, BNC, 75ohm Standard SMPTE 292M 1.5Gbit/s SMPTE 259M 270Mbit/s Embedded audio Up to 16 channels Return Loss >15dB Video Signal Output Video Signal Output Outpu 3xHD/SD-SDI, BNC, 75ohm (2 HD/SD-SDI outputs1 of 2 for loop-out without power, 1 HD/SD-SDI loop) Standard SMPTE 292M 1.5Gbit/s SMPTE 259M 270Mbit/s VIO AM-SD Video Signal Input Input 1xSD-SDI, BNC, 75ohm Standard SMPTE 259M 270Mbit/s Embedded audio: Up to 16 channels Video Signal Output Output Interface 3xSD-SDI, BNC, 75ohm (2SD-SDIoutputs1of 2for loop-out without power, 1 SD-SDI loop) Standard SMPTE 259M270Mbit/s Digital Audio Signal Input Interface 2xAES, BNC, unbalanced Digital Audio Signal Input Interface 2xAES, BNC, unbalanced Analog Audio Signal Input interface 1xaudio stereo, 3pin, balanced Analog Audio Signal Input Interface 1xaudio stereo, 3pin, balanced Max level +24dBu Physical Power Supply 2x120W Max level +24dBu Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO VIO ALC-SD VIO ALC-HD VIO RCP-A VIO AM-SD VIO AM-HD SD digital audio loudness controller HD/SD digital audio loudness controller VIO ALC/DAP universal remote panel, with speakers Analog/AES/SD embedded digital audio monitor Analog/AES/HD/SD embedded digital audio monitor Audio monitor VIO AM 45

48 VIO Delay HD/SD-SDI solid delay line VIO Delay series is an ideal product for high resolut ion of SDI signal delay. It can delay 1 digital serial signal (support SDI with The VIO Delay Series is an ideal product for high-resolution SDI signal delay. It can delay 1 digital serial signal (supports SDI with embedded audio) with advanced technology that allows delay time to be adjusted frame by frame. The max delay time is up to ten minutes for SD- SDI, two minutes for HD-SDI. Convenient function buttons and LCD display on front panel The max delay time is up to ten minutes for SD-SDI, two minutes for HD-SDI Advanced FPGA + DSP processing technology Accurately adjust delay time frame by frame Support H/V phase adjustment Support monitor the signal before delay AUX video input or audio mute to avoid abnormal video signal output Provide the quick switch between bypass and delay signal 4xAES Input and output optional Program loop-out when power off 1U chassis structure, redundant power supplies support SNMP Supply RCP Work theory of Mute advance and Aux advance VIO I Regular PGM signal is delayed in storage area. VIO Delay supports 1 AUX SDI signal input, and provides the quick switch among bypass, delay and AUX signal. When muting the delayed signal or replacing the abnormal signal with the AUX signal, according the reaction time, the operator can set Mute advance or Aux advance to reduce the loss of regular signal. 2 3 HD/SD-SDI solid delay line Use AUX signal to replace the abnormal PGM signal without AUX advance. The abnormal signal will flow into storage area during the operator s reaction time. Use AUX signal to replace the abnormal PGM signal with AUX advance. Set the AUX advance to offset the operator s reaction time. 46 VIO DELAY

49 Host and remote control pannel The front panel and back rear of VIO Delay The front panel and back rear of VIO Delay-RCP VIO Delay-HD Signal Input PGM xhd-sdi, BNC, 75ohm AUX I 1xHD-SDI, BNC, 75ohm Standard SMPTE 292M 1.5Gbit/s VIO Delay-SD Signal Input PGM 1xSD-SDI, BNC, 75ohm AUX 1xSD-SDI, BNC, 75ohm Standard SMPTE 259M270Mbit/s BB Input Ref In 1*CVBS, BNC, 75ohm BB Input Ref In 1*CVBS, BNC, 75ohm VIO Signal Output Interface 3xHD/SD-SDI, BNC, 75ohm (2 after-delay outputs 1 of 2 for loop-out without power, 1 before-delay output) Standard SMPTE 292M 1.5Gbit/s SMPTE 259M 270Mit/s Control Interface RS pin female "D" Network RJ45, 1000MBase T Ethernet Physical Power Supply: 2x120W Size 440mm 320mm 44mm Signal Output Interface 3xSD-SDI, BNC, 75ohm (2 after-delay outputs1 of 2 for loop-out without power, 1 before-delay output) Standard SMPTE 259M 270Mbit/s Control Interface RS pin female "D" Network portrj45, 1000MBase T Ethernet Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm HD/SD-SDI delay line VIO Delay-SD90S SD-SDI Solid Delayer, max delay t ime is 90s. VIO Delay-SD180S SD-SDI Solid Delayer, max delay t ime is 180s. VIO Delay-SD300S SD-SDI Solid Delayer, max delay t ime is 300s. VIO Delay-SD600S SD-SDI Solid Delayer, max delay t ime is 600s. VIO Delay-HD60S HD-SDI Solid Delayer, max delay t ime is 60s. VIO Delay-HD120S HD-SDI Solid Delayer, max delay t ime is 120s VIO DELAY 47

50 VIO TSG-AS Analog Sync Signal Generator for PAL/NTSC Video VIO DCO is an SDI auto change over which can monitor 2channels SD SDI input signals (Main/Backup), and switches automatically The VIO TSG-AS is a high-performance, reliable BB generator designed for broadcasting by Gefei-Tech. It supports 12 output interfaces, an independent host and slave, and 2 loop out interfaces. It comes with external phase lock, H/V adjustment, and P/N system selection. With internal WebServer, users can control various video/audio signal settings through a network interface and upload 3 static images as needed. The VIO TSG-AS runs on dual-redundant power and a full modularization structure. Standard 1U chassis Supports external phase lock, H/V adjustment, and P/N system selection of BB output Internal WebServer - users can control various A/V signal functions over a network 12 output channels of independent BB output in high quality Dual-redundant power and full modularization structure Block Diagram VIO Input Sync. Input: 1xREF Input connector: BNC Amplitude: ±6dB Vp-p SCH phase: ±40 SNR: 40dB Return loss: 40dB (within 5MHz) Output BB output: 12xBB, 1xLoop Input connector: BNC Format: NTSC/PAL Return loss: 30dB (within 5MHz) Precision of color burst: ±5% Precision of sync: ±3% Blanking level: ±50mV SCH phase: ±5 Timing adjustment: full color frame Control mode Interface: RJ4510/100/1000M Ethernet Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO TSG-AS VIO TSG-BS Analog Sync signal generator for PAL/NTSC video, 12 BB outputs Dual auto switchable analog sync signal generator for PAL/NTSC video, 12 BB outputs 48 VIO TSG-AS

51 VIO TSG-BS Dual Auto-Switchable Analog Sync Signal Generator The VIO TSG-BS supplies a slave BB generate module to recognize the changeover between the host and the slave, guaranteeing the safety and stability of the whole operation system. It supports 12 outputs, an independent host and slave, and 2 loop out interfaces. Users can control it manually or automatically. The VIO TSG-BS comes with features such as external phase lock, H/V adjustment, and P/N system selection. With internal WebServer. users can control various video/audio signal settings through a network interface and upload 3 static images as needed. The VIO TSG-BS runs on dual-redundant power and a full modularization structure. Standard 1U chassis Change over between host BB generator and slave Supports external phase lock, H/V adjustment, and P/N system selection of BB output Internal WebServer - users can control various A/V signal functions over a network 12 output channels of independent BB output in high quality Dual-redundant power and full modularization structure Block Diagram VIO Input Sync. Input: 2xREF Input connector: BNC Amplitude: ±6dB Vp-p SCH phase: ±40 SNR: 40dB Return loss: 40dB (within 5MHz) Output BB output: 12xBB, 1xLoop Input connector: BNC Format: NTSC/PAL Return loss: 30dB (within 5MHz) Precision of color burst: ±5% Precision of sync: ±3% Blanking level: ±50mV SCH phase: ±5 Timing adjustment: full color frame Control mode Interface: RJ45 10/100/1000M Ethernet Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO TSG-AS VIO TSG-BS Analog Sync signal generator for PAL/NTSC video, 12 BB outputs Dual auto switchable analog sync signal generator for PAL/NTSC video, 12 BB outputs VIO TSG-BS 49

52 VIO MFC Multi-format converter VIO MFC series are format converter based on 1RU chassis, including VIO MFC HDMI-HD, VIO MFC HDMI-SD, VIO MFC UDC, and VIO MFC-X. It s a bridge between broadcasting and IT area. Support LCD menu, control button, and LED indication on front panel. CVBS output and audio input/output are optional. Support various formats for VGA and DVI (HDMI) input. Up to 1920x1080 for DVI (HDMI) input and 1600x1200 forvga input. Besides inner sync, genlock with full phasing control for V-phase and H-phase locks HD/SD-SDI output to blackburst. For up/down conversion, adopt AFD auto-sensing or manual setting (Crop/Bar/Stretch). Magnify the selected image area though the Web server. Support moving and adjusting the magnify area pixel bypixel. Provide flexible adjustment for luminance, saturation, contrast, detail, noise reduction Multi-level anti-flicker Preset layouts for all parameter settings Application VIO multi-format converter VIO MFC HDMI-HD VIO MFC HDMI-SD VIO MFC UDC VIO MFC-X Convert DVI (HDMI) and VGA signal to HD/SD-SDI with genlock Convert DVI (HDMI) and VGA signal to SD-SDI with genlock Up/down cross conversion with genlock Universal format converter, convert DVI (HDMI), VGA, HD/SD-SDI CVBS signal to each other with genlock 50 VIO MFC

53 Web control UI VIO MFC HDMI-HD DVI/HDMI/VGA to HD/SD-SDI converter with genlock Input: VGA input number: 1 Connector: DB15 Female R e s o u l a t i o n : x / 6 0 / x / 6 0 / x768/60/ x864/60/ x768/ x800/ x960/ x1024/ x768/ x900/ x900/ x1200/60 Analog video output interface(optional) Number :4xCVBS BNC 75ohm Audio input&output interface(optional) Digital input number: 2 connector: BNC 75ohm unbanlance Format: AES-3 SMTPE 276M Analog input number : 2 VIO DVI/HDMI input number : 1 Connector : DB24 female Resoulation: 720p 50/59.94/ i 50/59.94/60; 1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60; x x x x x x 5 0 / x768x x800x x960x x1024x601366x768x601920x1080x60/50 Output: HD/SD-SDI output number: 2 Connector: BNC 75ohm Format: SMPTE 292M, 1.485Gb/s SMPTE 259M-C 270Mb/s 625i 50, 525i 59.94, 720p 50/59.94/ i 50/59.94/ p 25/30 Connector: 3-pin 600ohm Balance Digital output number: 2 Connector: BNC 75ohm unbanlance Format : AES-3 SMTPE 276M Analog output number :2 Connector: 3-pin 600ohm Balance Genlock: 1*BNC SMPTE 259M-C 270Mb/s 625i 50, 525i 59.94, Control Interface 1x RJ45 10/100/1000M auto-adapting Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm Multi-format converter Return loss: >15dB Signal Level: 800mV±10% Overshoot: Jitter: <80mV <0.2UI Rise and fall time: <500ps DC offset : 0V±500mV VIO MFC 51

54 VIO MFC HDMI-SD DVI/HDMI/VGA to SD-SDI converter with genlock Input: VGA input number: 1 Connector: DB15 Female R e s o u l a t i o n : x / 6 0 / x / 6 0 / 7 5 DC offset : 0V±500mV Analog video output interface(optional) Number :4xCVBS BNC 75ohm 1024x768/60/ x864/60/ x768/60 Audio input&output interface(optional) 1280x800/ x960/ x1024/ x768/60 Digital input number: x900/ x900/ x1200/60 connector: BNC 75ohm unbanlance Format: AES-3 SMTPE 276M DVI/HDMI input number : 1 Analog input numberl : 2 Connector : DB24 female Connector: 3-pin 600ohm Balance Resoulation: 720p 50/59.94/ i 50/59.94/60; 1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60; Digital output number: x x x x x x 5 0 / 6 0 Connector: BNC 75ohm unbanlance 1280x768x x800x x960x60 Format : AES-3 SMTPE 276M 1280x1024x601366x768x601920x1080x60/50 Analog outputt numberl :2 Output: Connector: 3-pin 600ohm Balance SD-SDI output number: 2 Genlock: Connector: BNC 75ohm 1xBB In, BNC Format: SMPTE 259M-C 270Mb/s SMPTE 259M-C 270Mb/s 625i 50, 525i 59.94, 625i 50, 525i 59.94, Return loss: >15dB Signal Level: 800mV±10% Control Interface 1x RJ45 10/100/1000M auto-adapting Overshoot: Jitter: <80mV <0.2UI Power 2*120W 100 ~ 256 VAC 50-60Hz Rise and fall time: <500ps Dimension 440mm 483mm 45mm VIO VIO MFC HDMI-UDC Up/down cross converter with genlock Input: SD/HD input number : 1 Connector: BNC 75ohm DC offset : 0V±500mV Analog video output interface(optional) Number :4xCVBS BNC 75ohm Format: SMPTE 259M-C 270Mb/s SMPTE-292M 1.485Gps Audio input&output interface(optional) SMPTE Gps Digital input number: 2 SD: 625i/50; 525i/60 HD: 720p 50/59.94/60 connector: BNC 75ohm unbanlance 1080i 50/59.94/60; 1080p 30/29.97/25/24/23.98; Format: AES-3 SMTPE 276M 1080p 50/59.94/60; Analog input numberl : 2 Analog video input number:1 Connector: 3-pin 600ohm Balance multi-format converter Connector: BNC 75ohm Format: SMPTE 259M-C 270Mb/s 625i/50; Output: HD/SD-SDI output number: 2 Connector: BNC 75ohm Format: SMPTE 292M, 1.485Gb/s Digital output number: 2 Connector: BNC 75ohm unbanlance Format : AES-3 SMTPE 276M Analog output numberl :2 Connector: 3-pin 600ohm Balance Level: +24dBu (0dbFS) SMPTE 259M-C 270Mb/s 625i 50, 525i 59.94, Genlock: 720p 50/59.94/60 1xBB In, BNC 1080i 50/59.94/60 SMPTE 259M-C 270Mb/s 625i/50; 1080p 25/30 Control Interface Return loss: >15dB 1x RJ45 10/100/1000M auto-adapting Signal Level: 800mV±10% Power Overshoot: <80mV 2*120W 100 ~ 256 VAC 50-60Hz Jitter: <0.2UI Dimension Rise and fall time: <500ps 440mm 483mm 45mm 52 VIO MFC

55 VIO MFC-X Universal multi-format converter Input: VGA input number: 1 Connector: DB15 Female R e s o u l a t i o n : x / 6 0 / x / 6 0 / x768/60/ x864/60/ x768/60 Overshoot: <80mV Jitter: <0.2UI Rise and fall time: <500ps DC offset : 0V±500mV VGA output number: x800/ x960/ x1024/ x768/ x900/ x900/ x1200/60 DVI/HDMI input number : 1 Connector : DB24 female Resoulation: 720p 50/59.94/ i 50/59.94/60; 1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60; x x x x x x 5 0 / x768x x800x x960x x1024x601366x768x601920x1080x60/50 SD/HD input number : 1 Connector: BNC 75ohm Format: SMPTE 259M-C 270Mb/s SMPTE-292M 1.485Gps SMPTE Gps SD: 625i/50; 525i/60 HD: 720p 50/59.94/ i 50/59.94/60; 1080p 30/29.97/25/24/23.98; 1080p 50/59.94/60; Analog video input number:1 Connector: BNC 75ohm Format: SMPTE 259M-C 270Mb/s 625i/50; Output: HD/SD-SDI output number: 2 Connector: BNC 75ohm Format: SMPTE 292M, 1.485Gb/s SMPTE 259M-C 270Mb/s 625i 50, 525i 59.94, 720p 50/59.94/ i 50/59.94/ p 25/30 Return loss: >15dB Signal Level: 800mV±10% Connector: DB15 Female Resoulation: 800x600/60p 1024x768/60p 1280x800/60p 1280x960/60p 1280x1024/60p 1360x768/60p DVI/HDMI output number : 1 Connector : DB24 female Resoulation: 720x576/60p 800x600/60p 1024x768/60p 1280x720/60p 1280x768/60p 1280x1024/60p 1360x768/60p 1400x1050/60p 1600x1200/60p 1920x1080/50p 1920x1080/60p nalog video output interface(optional) Number :4xCVBS BNC 75ohm Audio input&output interface(optional) Digital input number: 2 connector: BNC 75ohm unbanlance Format: AES-3 SMTPE 276M Analog input numberl : 2 Connector: 3-pin 600ohm Balance Digital input number: 2 Connector: BNC 75ohm unbanlance Format : AES-3 SMTPE 276M Analog input numberl :2 Connector: 3-pin 600ohm Balance Genlock: 1xBB In, BNC SMPTE 259M-C 270Mb/s 625i/50; Control Interface 1x RJ45 10/100/1000M auto-adapting Power 2*120W 100 ~ 256 VAC 50-60Hz Dimension 440mm 483mm 45mm VIO Audio input&output interface(optional) Digital input number: 2 connector: BNC 75ohm unbanlance Format: AES-3 SMTPE 276M Level: 0.2 to 2.0 Vp-p Digital output number: 2 Connector: BNC 75ohm unbanlance Format : AES-3 SMTPE 276M Level: 0.2 to 2.0 Vp-p Analog output number :2 multi-format converter Analog input number : 2 Connector: 3-pin 600ohm Balance Connector: 3-pin 600ohm Balance Level: +24dBu (0dbFS) Level: +24dBu (0dbFS) Frequency Response : 20Hz to20khz Frequency Response : 20Hz to20khz Analog video output interface(optional) Number :4xCVBS BNC 75ohm Level1Vpp Return Loss >40dB to 5.75MHz Frequency Response +/-0.1dB, DC to 10MHz Differential Gain 0.15% Differential Phase 0.15 degree Crosstalk -60dB at 5MHz SNR 75dB to 5.75MHz unweighted VIO MFC 53

56 XIO product list XIO 54

57 XIO 1UF & XIO 3UF XIO modular processing platform XIO 1UF modular platform offers high-density delivery of HD and SD modular solution. The 1U rack unit supports up to 4 modules and hot swap plug. Single and dual PSU versions are available. It provides inner built Xio-BUS. This platform can be managed by centralized monitoring and management software system. It also can be monitored and controlled though standard and full SNMP and Ethernet. XIO 3UF modular platform offers high-density delivery of HD and SD modular solution. The 3U rack unit supports up to 16 modules. Single and dual PSU versions are available. It provides inner built Xio-BUS. This platform can be managed by centralized monitoring and management software system. It also can be monitored and controlled though standard SNMP and Ethernet. Up to 16 single or 8 double width modules for 3RU module platform, Up to 4 single or 2 double width modules for 1RU module platform Support various signal types, such as 3G-SDI, HD-SDI, SD-SDI, ASI, Analog video signal and Analog audio signal Provide various kinds of signal processing, such as DA processing, embedding and de-embedding, up and down conversion, D/A and A/D, frame sync processing and so on Support global BB Inner XIO data bus Support hot swap plug Support RS232/RS422 control Redurant power supply Managed by centralized monitoring and management software system Support standard SNMP XIO 1U modular platform Up to 4 single or 2 double width modules Size 100 mm width 365 mm length Power Input V, 47~63Hz Inrush current: 50 A (Max) Power consumption Max 250w (Full load) Temperature Operation temperature 0-40 Store temperature U modular platform Up to 16 single or 8 double width modules Size 100 mm width 365 mm length Power Input V, 47~63Hz Inrush current: 50 A (Max) Power consumption Max 250w (Full load) Temperature Operation temperature 0-40 Store temperature XIO modular processing platform XIO 1UF XIO 3UF XIO PSU XIO 1RU modular platform with 4 slots and signal PSU,redurant power supply optiaonal XIO 3RU modular platform with 16 slots and signal PSU,redurant power supply optiaonal Power supply moduler for XIO chassis XIO 1UF & XIO 3UF 55

58 XIO NET XIO platform management and network interface XIO NET is high-quality interface which provides an individual Ref interface used as global clock to sync all the other modules inside the XIO platform. There are hot-restart button and reset button to deal with abnormal emergency situation. It adopts LED display module to show the IP address of XIO NET. XIO NET provides a RJ45 interface, via which we can configure and manage the status of the modules. It also can be monitored and controlled though standard and full SNMP. Provide a RJ45 interface, 10/100/1000M auto-sensing Read and monitor the status of the module inside the XIO platform via Ethernet Manage and configure the parameters of the modules inside the XIO platform via Ethernet Supports standard and full SNMP Provide an individual Ref interface used as global clock to sync all the other modules inside the XIO platform Detect the slot position of module automatically Support hot plug swag Adopt emergency measures with hot-restart button and reset button XIO Web configure interface Ref In XIO platform management and network interface Input type Analog composite video Input interface 1*Ref, BNC Standard PAL/NTSC Impedance 75 ohms Ref loop Output type Analog composite video Output interface 1*Ref loop, BNC Standard PAL/NTSC Impedance 75 ohms Ethernet Interface 1*RJ45 Network Type 10/100/1000M auto-adapting RS232 Interface Type 1*DB15 15-pin D type 1U interface 3U interface XIO NET XIO platform management and network interface 56 XIO NET

59 XIO 9000ADA Analog audio signal distribution amplifier The XIO 9000ADA is a high-quality distribution amplifier which can distribute one analog audio signal to seven outputs. The interface for output and input is a 3-pin balanced interface. It comes with a wide range of signal gain which can be controlled from the card edge. It adopts an independent output driver with a good output isolation and crosstalk suppression. The XIO 9000ADA provides automatic signal equalization, which can significantly improve signal quality and reduce signal loss caused by transmission of the input source over long distances. The LED lights on the module indicate input signal and power supply status. It supports SNMP. It can be managed and monitored in real-time by XIO NET, the Network Management Module, via Ethernet. One analog audio signal input, seven analog audio signals output Adopt 3-pin interface for input and output Support hot swap plug Adjustable signal gain from -6dB to +27dB Provide automatic signal equalization for long cable applications Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog audio input Input number 1 Interface 3-pin (Balanced) Impedance 600 ohms Frequency response: <±0.05dB 20Hz20KHz Analog video Output Output number 7 Interface 3-pin (Balanced) Gain range -6dB to +27dB Impedance 600 ohms Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W Analog audio signal distribution amplifier XIO 9000ADA XIO 9001ADA XIO 9000VDA XIO 9001VDA 1in 7 out analog audio distribution amplifier 2in 3 out analog audio distribution amplifier 1in 7 out analog composite video distribution amplifier 2in 3 out analog composite video distribution amplifier XIO 9000ADA 57

60 XIO 9000VDA Analog composite video signal distribution amplifier The XIO 9001VDA is a high-quality distribution amplifier designed to distribute dual analog composite video signals to 2x3 outputs. The unit supports automatic input detection of NTSC and PAL. Output signal gain can be adjusted with a DIP Switch. The XIO 9001VSD provides automatic signal equalization for up to 200m (Belden 1694A) which can improve signal quality and reduce signal loss caused by transmission of the input source over long distances. The LED lights on the module indicate the status of input signal and power supply. It supports SNMP along with real-time management and monitoring by XIO NET, the Network Management Module, via Ethernet. One analog composite video signal input, seven analog composite video signals output Support automatic input detection of NTSC and PAL standard Support hot swap plug Adjust the gain of output signal via DIP Switcher. Provides signal equalization adjustment for up to 200m (Belden 8281) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog composite video signal distribution amplifier Analog Video Input Signal amplitude 1Vpp Input interface 1*CVBS BNC White level 0.7V Impedance 75 ohms H-sync level -0.3V Format Format: SMPTE 259M-C 270Mb/s 625i/50; 525i60 Status indicator Length 200 (Belden 8281) Signal status indicator, Power indicator Analog Video Output (Indicate by shining or extinguishing of the green LED) Output interface 7*CVBS, BNC Power Impedance 75 ohms Power consumption: 2-3W XIO 9000VDA 1in 7 out analog composite video distribution amplifier XIO 9001VDA 2in 3 out analog composite video distribution amplifier XIO 9000VSD-RC 1in 7 out SDI/ASI signal distribution amplifier with RC XIO 9001VSD-RC 2in 3 out SDI/ASI signal distribution amplifier with RC XIO 9000VSD-HD 1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC 58 XIO 9000VDA

61 XIO 9000VSD-RC SD-SDI/ASI signal distribution amplifier with RC The XIO 9000VSD-RC is a high-quality distribution amplifier which can distribute one SD-SDI signal to seven outputs with reclocking. The device supports SD-SDI input signal with embedded audio and automatic input detection of 525i 60 and 625i 50. It also supports ASI signals to be processed and distributed. The XIO 9000VSD-RC provides automatic signal equalization and reclocking for long cable applications, which can improve signal quality and reduce signal loss caused by transmission of input sources over long distances. The LED lights on the module indicate the status of the input signal and power supply. It supports SNMP and comes with real-time management and monitoring by XIO NET, the Network Management Module, via Ethernet. One SD-SDI signal input, seven SD-SDI signal outputs with RC Support automatic input detection of 525i 60 and 625i 50 Support SD-SDI signal with embedded audio Support ASI signal to be processed and distributed Support hot swap plug Broadcast quality with inner 10 bit processing Provide automatic signal equalization and reclocking for long cable applications Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Digital Input Input interface 1*SD-SDI/ASI BNC Impedance 75 ohms Format 525i60, 625i50 SMPTE 259M-C 270Mb/s Reflection loss >15dB, 270MHz Max length <200m (Belden 1694A) Digital Output Output interface 7* SD-SDI/ASI BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Level 800mV±5% Jitter <0.2UI to100khz Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W SD-SDI/ASI signal distribution amplifier with RC XIO 9000VSD-RC XIO 9001VSD-RC XIO 9000VSD-HD 1in 7 out SDI/ASI signal distribution amplifier with RC 2in 3 out SDI/ASI signal distribution amplifier with RC 1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC XIO 9000VSD-RC 59

62 XIO 9000VSD-HD HD/SD-SDI/ASI signal distribution amplifier with RC Based on brand-new XIO platform, XIO 9000VSD-HD is a high-quality distribution amplifier which can distribute one HD/SD-SDI signal to seven outputs with reclocking. And the device supports HD/SD-SDI input signal with embedded audio and automatic input detection of 525i 60, 625i 50, 720p, 1080i, 1080p, and 1080psf format. It also supports ASI signal to be processed and distributed. XIO 9000VSD-HD provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. One HD/SD-SDI signal input, seven HD/SD-SDI signal outputs with RC Support automatic input detection of 525i 60, 625i 50, 720p, 1080i, 1080p, and 1080psf format Support HD/SD-SDI signal with embedded audio Support ASI signal to be processed and distributed Support hot swap plug Broadcast quality with inner 10 bit processing Provide automatic signal equalization and reclocking for long cable applications Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface HD/SD-SDI/ASI signal distribution amplifier with RCz Digital Input Input interface 1*HD/SD-SDI/ASI BNC Impedance 75 ohms Format 525i60, 625i50 720p60/59.94/50/30/29.97/25/24/ i60/59.94/ p30/29.97/25/24/ psf30/29.97/25/24/23.98 Max length SD-SDI: <200m (Belden 1694A) HD-SDI: <100m (Belden 1694A) XIO 9000VSD-RC 1in 7 out SDI/ASI signal distribution amplifier with RC XIO 9001VSD-RC 2in 3 out SDI/ASI signal distribution amplifier with RC XIO 9000VSD-HD 1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC Digital Output Output interface 7* HD/SD-SDI/ASI BNC Impedance 75 ohms Format SMPTE 259M-C 270Mb/s SMPTE 292M 1.5Gbit/s Level 800mV±5% Jitter <0.2UI 100KHz Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption 2-3W 60 XIO 9000VSD-HD

63 XIO 9001VSD-RC Dual SD-SDI/ASI signals distribution amplifier with RC Based on brand-new XIO platform, XIO 9001VSD-RC is a high-quality distribution amplifier which provides dual SD-SDI signals for input, and distributes each of them to three outputs with reclocking. And the device supports SD-SDI input signal with embedded audio and automatic input detection of 525i 60, and 625i 50. It also supports ASI signal to be processed and distributed. XIO 9001VSD-RC provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. 2ch SD-SDI signals input, 3ch SD-SDI signal distributed outputs with RC Support automatic input detection of 525i 60 and 625i 50 Support SD-SDI signal with embedded audio Support ASI signal to be processed and distributed Support hot swap plug Broadcast quality with inner 10 bit processing Provide automatic signal equalization and reclocking for long cable applications Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored XIO 1U interface 3U interface Digital Input Input interface 2*SD-SDI/ASI BNC Digital Output Output interface 6* SD-SDI/ASI BNC Impedance 75 ohms Impedance 75 ohms Format 525i60, 625i50 SMPTE 259M-C 270Mb/s Format Level 525i 60, 625i 50 SMPTE 259M-C 270Mb/s 800mV±5% Reflection loss >15dB, 270MHz Jitter <0.2UI 100KHz Max length <200m (Belden 1694A) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W XIO 9000VSD-RC 1in 7 out SDI/ASI signal distribution amplifier with RC XIO 9001VSD-RC 2in 3 out SDI/ASI signal distribution amplifier with RC XIO 9000VSD-HD 1in 7 out HD/SD-SDI/ASI signal distribution amplifier with RC Dual SD-SDI/ASI signals distribution amplifier with RC XIO 9001VSD-RC 61

64 XIO 9001ADA Dual analog audio signals distribution amplifier Based on brand-new XIO platform, XIO 9001ADA is a high-quality distribution amplifier which provides dual analog audio signals for input, and distributes each of them to three outputs. The interface for output and input is 3-pin balanced interface. A wide range of gain control is possible and controlled from the card edge. It adopts independent output driver with a good output isolation and crosstalk suppression. XIO 9001ADA provides automatic signal equalization, which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Dual analog audio signals input, and each one distributed to three outputs Adopt 3-pin interface for input and output Support hot swap plug Adjustable signal gain from -6dB to +27dB Provide automatic signal equalization for long cable applications Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Dual analog audio signals distribution amplifier Analog audio input Gain range -6dB to +27dB Input interface 2*analog audio input Impedance 600 ohms Interface 3-pin (Balanced) Status indicator Impedance 600 ohms Signal status indicator, Power indicator Frequency response: <±0.05dB 20Hz 20KHz Analog video Output (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W Output interface 6* analog audio output Interface 3-pin (Balanced) XIO 9000ADA 1in 7 out analog audio distribution amplifier XIO 9001ADA 2in 3 out analog audio distribution amplifier XIO 9000VDA 1in 7 out analog composite video distribution amplifier XIO 9001VDA 2in 3 out analog composite video distribution amplifier 62 XIO 9001ADA

65 XIO 9001VDA Dual analog composite video signals DA Based on brand-new XIO platform, XIO 9001VDA is a high-quality distribution amplifier which provides dual analog composite video signals for input, and distributes each of them to three outputs. And the device supports automatic input detection of NTSC and PAL. The gain of output signal can be adjusted via DIP Switcher. XIO 9001VDA provides signal equalization adjustment for up to 200m (Belden 8281), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Dual CVBS signals input, and each one distributed to three CVBS signal outputs Support automatic input detection of NTSC and PAL standard Support hot swap plug Adjust the gain of output signal via DIP Switcher. Provides signal equalization adjustment for up to 200m (Belden 8281) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog Video Input Input interface 2*CVBS BNC Impedance 75 ohms Format SMPTE 259M-C 270Mb/s 525i60, 625i50 Length 200 (Belden 8281) Analog Video Output Output interface 6*CVBS, BNC Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Impedance 75 ohms Signal amplitude 1Vpp White level 0.7V H-sync level -0.3V Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W Dual analog composite video signals DA XIO 9000ADA XIO 9001ADA XIO 9000VDA XIO 9001VDA 1in 7 out analog audio distribution amplifier 2in 3 out analog audio distribution amplifier 1in 7 out analog composite video distribution amplifier 2in 3 out analog composite video distribution amplifier XIO 9001VDA 63

66 XIO 9010DEC Analog video to SD-SDI converter Based on brand-new XIO platform, XIO 9010DEC is a high-quality A/D converter which converts one analog composite video signal to four identical SDI signals. It supports NTSC and PAL standard for input signal. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. One analog composite video signal inputs, four identical SDI signals output Support NTSC and PAL standard for input signal Support hot swap plug Broadcasting quality of inner 10 bit processing Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog video to SDSDI converter Analog Video Input Input interface 1*CVBS, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Reflection loss >40dB, 5.8MHz Digital Video Output Output interface 4*SDI, BNC Impedance 75 ohms Format SMPTE 259M-C 270Mb/s Level: 800mV±5% Jitter: <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W XIO 9010DEC XIO 9010DEC-4AUD XIO 9010DES XIO 9010DES-4AUD Analog video to SDSDI converter Analog video and audio to SDSDI converter Analog video to SDSDI converter with frame sync. Analog video and audio to SDSDI converter with frame sync. 64 XIO 9010DEC

67 XIO 9010DEC-4AUD Analog video and audio to SD-SDI converter Based on brand-new XIO platform, XIO 9010DEC-4AUD is a high-quality A/D converter which converts one analog composite video signal to two identical SDI signals. Meanwhile, two analog audio stereo signals are embedded into each single serial digital signal. The embedded audio channels can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports NTSC and PAL standard for input signal. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. One analog composite video signal inputs, four analog audio signals input, and two identical SDI signals output Select the embedded audio channels freely though DIP Switch Support NTSC and PAL standard for input signal Support hot swap plug Broadcasting quality of inner 10 bit processing Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog Video Input Input interface: 1*CVBS, BNC Impedance: 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Reflection loss: >40dB, 5.8MHz Analog Audio Input Input interface: 4*3pin, balance Impedance: 600 ohms Max level +24dBu (0dBFs) Digital Video Output Output interface: 2*SDI, BNC Impedance: 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Level: 800mV±5% Jitter: <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Power Power consumption: 2-3W Analog video and audio to SDSDI converter XIO 9010DEC XIO 9010DEC-4AUD XIO 9010DES XIO 9010DES-4AUD Analog video to SDSDI converter Analog video and audio to SDSDI converter Analog video to SDSDI converter with frame sync. Analog video and audio to SDSDI converter with frame sync. XIO 9010DEC-4AUD 65

68 XIO 9010DES Analog video to SDSDI converter with frame sync. Based on brand-new XIO platform, XIO 9010DES is a high-quality A/D converter which converts one analog composite video signal to four identical SDI signals with frame sync processing. It supports NTSC and PAL standard for input signal. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet One analog composite video signal inputs, four identical SDI signals output Provide an individual Ref interface and frame sync processing Support NTSC and PAL standard for input signal Support hot swap plug Provide three kinds of sync mode: INT, single EXT, and Global EXT Broadcasting quality of inner 10 bit processing Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog video to SDSDI converter with frame sync. IAnalog Video Input Impedance 75 ohms Input interface 1*CVBS, BNC Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Impedance 75 ohms Level 800mV±5% Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Jitter <0.2UI (100 KHz) Reflection loss >40dB, 5.8MHz Status indicator Ref In Input type Analog composite video Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) Input interface 1*Ref, BNC Power Format 625i 50 SMPTE 259M-C 270Mb/s Power consumption: 2-3W Digital Video Output Output interface 4*SDI, BNC XIO 9010DEC Analog video to SDSDI converter XIO 9010DEC-4AUD Analog video and audio to SDSDI converter XIO 9010DES Analog video to SDSDI converter with frame sync. XIO 9010DES-4AUD Analog video and audio to SDSDI converter with frame sync. 66 XIO 9010DES

69 XIO 9010DES-4AUD Analog video and audio to SDSDI converter with frame sync. Based on brand-new XIO platform, XIO 9010DES-4AUD is a high-quality A/D converter which converts one analog composite video signal to two identical SDI signals with frame sync processing. Meanwhile, two analog audio stereo signals are embedded into each single serial digital signal. The embedded audio channels can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports NTSC and PAL standard for input signal. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. One analog composite video signal inputs, four analog audio signals input, and two identical SDI signals output Select the embedded audio channels freely though DIP Switch on card edge Provide an individual Ref interface and frame sync processing Support NTSC and PAL standard for input signal Support hot swap plug Provide three kinds of sync mode: INT, single EXT, and global EXT come from XIO net Broadcasting quality of inner 10 bit processing Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Analog Video Input Impedance 600 ohms Input interface 1*CVBS, BNC Max level+24dbu (0dBFs) Impedance 75 ohms Digital Video Output Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Output interface 2*SDI, BNC Reflection loss >40dB, 5.8MHz Impedance 75 ohms Ref In Input type Analog composite video Format Level 525i 60, 625i 50 SMPTE 259M-C 270Mb/s 800mV±5% Input interface 1*Ref, BNC Jitter <0.2UI (100 KHz) Format 625i 50 SMPTE 259M-C 270Mb/s Status indicator Signal status indicator, Power indicator Analog Audio Input (Indicate by shining or extinguishing of the green LED) Input interface 4*3pin, balance Power Power consumption: 2-3W XIO 9010DEC Analog video to SDSDI converter XIO 9010DEC-4AUD Analog video and audio to SDSDI converter XIO 9010DES Analog video to SDSDI converter with frame sync. XIO 9010DES-4AUD Analog video and audio to SDSDI converter with frame sync. Analog video and audio to SDSDI converter with Frame Sync. XIO 9010DES-4AUD 67

70 XIO 9020EMB-4AUD SDI signal & analog audio embedder with D/A Based on brand-new XIO platform, XIO 9020EMB-4AUD is a high-quality embedder which embeds two analog audio stereo signals into a single SDI signal, and outputs two identical serial digital signals with embedded audio. Meanwhile, the SDI signal is converted to one analog composite video signal for monitoring or other applications. The embedded audio group can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports 625i 50 and 525i 60 format for input signal. XIO 9020EMB-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module. Support 625i 50 and 525i 60 format for input signal Support hot swap plug Select the embedded audio channels freely though DIP Switch Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface SDI signal & analog audio embedder with D/A Digital Video Input Digital Video Output Input interface 1*SD-SDI, BNC Output interface 2*SDI, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Level 800mV±5% Max length <200M (Belden 1694A) Jitter <0.2UI (100 KHz) Analog Audio Input Analog Video Output Input interface 4*3pin, balance Output interface 1*CVBS, BNC Max level +24dBu (0dBFs) Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Status indicator XIO 9020ENC SDI signal to analog video converter XIO 9020ENC -4AUD SDI signal to analog video and audio converter XIO 9020ENS SDI signal to analog video converter with frame sync. XIO 9020ENS -4AUD SDI signal to analog video and audio converter with frame sync. XIO 9020EMB -4AUD SDI signal & analog audio embedder with D/A XIO 9020 EMB -4AUD-FS SDI signal & analog audio embedder with FS and D/A Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) 68 XIO 9020EMB-4AUD

71 XIO 9020EMB-4AUD-FS SDI signal & analog audio embedder with frame sync. Based on brand-new XIO platform, XIO 9020EMB-4AUD-FS is a high-quality embedder which embeds two analog audio stereo signals into a single SDI signal, and outputs two identical serial digital signals with embedded audio and frame sync processing. Meanwhile, the SDI signal is converted to one analog composite video signal for monitoring or other applications. The embedded audio group can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports 625i 50 and 525i 60 format for input signal. XIO 9020EMB-4AUD-FS provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50 and 525i 60 format for input signal Support hot swap plug Provide three kinds of sync mode: INT, single EXT, and Global EXT Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Digital Video Input Digital Video Output Input interface 1*SD-SDI, BNC 75 ohms Output interface 2*SDI, BNC Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Max length <200M (Belden 1694A) Level 800mV±5% Ref In Jitter <0.2UI (100 KHz) Input type Analog composite video Analog Video Output Input interface 1*Ref, BNC Output interface 1*CVBS, BNC 75 ohms Format 625i 50 SMPTE 259M-C 270Mb/s Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Analog Audio Input Status indicator Input interface 4*3pin, balance Signal status indicator, Power indicator Max level +24dBu (0dBFs) (Indicate by shining or extinguishing of the green LED) XIO 9020ENC SDI signal to analog video converter XIO 9020ENC -4AUD SDI signal to analog video and audio converter XIO 9020ENS SDI signal to analog video converter with frame sync. XIO 9020ENS -4AUD SDI signal to analog video and audio converter with frame sync. XIO 9020EMB -4AUD SDI signal & analog audio embedder with D/A XIO 9020 EMB -4AUD-FS SDI signal & analog audio embedder with FS and D/A SDI signal & analog audio embedder with FS and D/A XIO 9020EMB-4AUD-FS 69

72 XIO 9020ENC SDI signal to analog video converter Based on brand-new XIO platform, XIO 9020ENC is a high-quality converter which converts one SDI signal to four analog composite video signals, and outputs two SDI signal. It supports 625i 50 and 525i 60 format for input signal. XIO 9020ENC provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50 and 525i 60 format for input signal Support hot swap plug provides automatic signal equalization for up to 200M (Belden 1694A) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface SDI signal to analog video converter Digital Video Input Input interface 1*SD-SDI, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Max length <200M (Belden 1694A) Digital Video Output Output interface 2*SDI, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Level 800mV±5% Jitter <0.2UI (100 KHz) Analog Video Output Output interface 4*CVBS, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) XIO 9020ENC XIO 9020ENC -4AUD XIO 9020ENS XIO 9020ENS -4AUD XIO 9020EMB -4AUD XIO 9020 EMB -4AUD-FS SDI signal to analog video converter SDI signal to analog video and audio converter SDI signal to analog video converter with frame sync. SDI signal to analog video and audio converter with frame sync. SDI signal & analog audio embedder with D/A SDI signal & analog audio embedder with FS and D/A 70 XIO 9020ENC

73 XIO 9020ENC-4AUD EMBSDI signal to analog video and audio converter Based on brand-new XIO platform, XIO 9020ENC-4AUD is a high-quality converter which converts one SDI signal to two analog composite video signals, and outputs one SDI signal. Meanwhile, two analog audio stereo signals are extracted from the SDI signal. The de-embedded audio group can be selected though DIP Switch. Also the de-embedded mode of audio channels is selectable, such as following input channels, crossing output, mixing output and so on. It supports 625i 50 and 525i 60 format for input signal. XIO 9020ENC-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module. Support 625i 50 and 525i 60 format for input signal Support hot swap plug Select de-embedded audio group though DIP Switch provides automatic signal equalization for up to 200M (Belden 1694A) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Digital Video Input Input interface 1*SD-SDI, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Max length <200M (Belden 1694A) Digital Video Output Output interface 1*SDI, BNC Impedance: 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Leve 800mV±5% Jitter <0.2UI (100 KHz) Analog Video Output Output interface 2*CVBS, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Analog Audio Output Output interface 4*3pin, balance Impedance 600 ohms Max level +24dBu (0dBFs) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) SDI signal to analog video and audio converter XIO 9020ENC XIO 9020ENC -4AUD XIO 9020ENS XIO 9020ENS -4AUD XIO 9020EMB -4AUD XIO 9020 EMB -4AUD-FS SDI signal to analog video converter SDI signal to analog video and audio converter SDI signal to analog video converter with frame sync. SDI signal to analog video and audio converter with frame sync. SDI signal & analog audio embedder with D/A SDI signal & analog audio embedder with FS and D/A XIO 9020ENC-4AUD 71

74 XIO 9020ENS SDI signal to analog video converter with FS Based on brand-new XIO platform, XIO 9020ENS is a high-quality converter which converts one SDI signal to four analog composite video signals, and outputs two SDI signal. Output signals go through frame sync processing. It supports 625i 50 and 525i 60 format for input signal. XIO 9020ENS provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50 and 525i 60 format for input signal Provide an individual Ref interface and frame sync processing Support hot swap plug provides automatic signal equalization for up to 200M (Belden 1694A) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface SDI signal to analog video converter with FS Digital Video Input Impedance 75 ohms Input interface 1*SD-SDI, BNC Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Impedance 75 ohms Level 800mV±5% Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Jitter <0.2UI (100 KHz) Max length <200M (Belden 1694A) Analog Video Output Ref In Input type Analog composite video Output interface Impedance 4*CVBS, BNC 75 ohms Input interface: 1*Ref, BNC Standard PAL/NTSC Standard PAL/NTSC Status indicator Digital Video Output Signal status indicator, Power indicator Output interface 2*SDI, BNC (Indicate by shining or extinguishing of the green LED) XIO 9020ENC SDI signal to analog video converter XIO 9020ENC -4AUD SDI signal to analog video and audio converter XIO 9020ENS SDI signal to analog video converter with frame sync. XIO 9020ENS -4AUD SDI signal to analog video and audio converter with frame sync. XIO 9020EMB -4AUD SDI signal & analog audio embedder with D/A XIO 9020 EMB -4AUD-FS SDI signal & analog audio embedder with FS and D/A 72 XIO 9020ENS

75 XIO 9020ENS-4AUD SDI signal to analog video and audio converter with frame sync. Based on brand-new XIO platform, XIO 9020ENS-4AUD is a high-quality converter which converts one SDI signal to two analog composite video signals, and outputs one SDI signal. Output signals go through frame sync processing. Meanwhile, two analog audio stereo signals are extracted from the SDI signal. The de-embedded audio group can be selected though DIP Switch. Also the deembedded mode of audio channels is selectable, such as following input channels, crossing output, mixing output and so on. It supports 625i 50 and 525i 60 format for input signal. XIO 9020ENS-4AUD provides automatic signal equalization for up to 200M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50 and 525i 60 format for input signal Provide an individual Ref interface and frame sync processing Support hot swap plug Select de-embedded audio group though DIP Switch provides automatic signal equalization for up to 200M (Belden 1694A) Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface IDigital Video Input Level 800mV±5% Input interface 1*SD-SDI, BNC 75 ohms Jitter: <0.2UI (100 KHz) Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Max length <200M (Belden 1694A) Ref In IInput interface: 1*Ref, BNC Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Digital Video Output Output interface: 1*SDI, BNC Impedance 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s XIO 9020ENC SDI signal to analog video converter XIO 9020ENC -4AUD SDI signal to analog video and audio converter XIO 9020ENS SDI signal to analog video converter with frame sync. XIO 9020ENS -4AUD SDI signal to analog video and audio converter with frame sync. XIO 9020EMB -4AUD SDI signal & analog audio embedder with D/A XIO 9020 EMB -4AUD-FS SDI signal & analog audio embedder with FS and D/A Analog Video Output Output interface 2*CVBS, BNC 75 ohms Format 525i 60, 625i 50 SMPTE 259M-C 270Mb/s Analog Audio Output Output interface 4*3pin, balance Impedance: 600 ohms Max level +24dBu (0dBFs) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) SDI sigsdi signal to analog video and audio converter with FS XIO 9020ENS-4AUD 73

76 XIO 9030HDDEM-4AUD HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs Based on brand-new XIO platform, XIO 9030HDDEM-4AUD is a high-quality de-embedder which extracts two analog audio stereo signals from a single HD/SD-SDI signal, and outputs two identical serial digital signals. The de-embedded audio group can be selected freely though DIP Switch. Also the de-embedded mode of audio channels is selectable, such as following input channels, crossing output, mixing output and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. XIO 9030HDDEM-4AUD provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format Select de-embedded audio group though DIP Switch provides automatic signal equalization for up to 100M (Belden 1694A) Support hot swap plug Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface HD/SD-SDI signal de-embedder Digital Video Input Input interface 1*HD/SD-SDI, BNC 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Max length <100M (Belden 1694A) Analog Audio Output Output interface 4*3pin, balance Max level +24dBu (0dBFs) Digital Video Output Output interface 2*HD/SD-SDI, BNC Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 800mV±5% Jitter <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) XIO 9030HDDEM-4AUD XIO 9030HDDEM-2AES XIO 9030HDDEM-4AUD-FS XIO 9030HDDEM-2AES-FS HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync. HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs with frame sync. 74 XIO 9030HDDEM-4AUD

77 XIO 9030HDDEM-4AUD-FS HD/SD-SDI de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync. Based on brand-new XIO platform, XIO 9030HDDEM-4AUD-FS is a high-quality de-embedder which extracts two analog audio stereo signals from a single HD/SD-SDI signal, and outputs two identical serial digital signals. The outputs go through frame sync processing. The de-embedded audio group can be selected freely though DIP Switch. Also the de-embedded mode of audio channels is selectable, such as following input channels, crossing output, mixing output and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. XIO 9030HDDEM-4AUD-FS provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Provide an individual Ref interface and frame sync processing Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format Support hot swap plug Provide three kinds of sync mode: INT, single EXT, and Global EXT Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface IDigital Video Input Input interface 1*HD/SD-SDI, BNC 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Max length <100M (Belden 1694A) Ref In Input type Analog composite video Input interface 1*Ref, BNC Standard PAL/NTSC Analog Audio Output Output interface 4*3pin, balance Max leve +24dBu (0dBFs) Digital Video Output Output interface 2*HD/SD-SDI, BNC Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 800mV±5% Jitter <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) HD/SD-SDI signal de-embedder XIO 9030HDDEM-4AUD XIO 9030HDDEM-2AES XIO 9030HDDEM-4AUD-FS XIO 9030HDDEM-2AES-FS HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 4ch analog audio outputs with frame sync. HD/SD-SDI audio de-embedder, 2ch HD/SD-SDI & 2ch AES audio outputs with frame sync. XIO 9030HDDEM-4AUD-FS 75

78 XIO 9030HDEMB-4AUD HD/SD-SDI signal & 4ch analog audio embedder Based on brand-new XIO platform, XIO 9030HDEMB-4AUD is a high-quality embedder which embeds two analog audio stereo signals into a single HD/SD-SDI signal, and outputs two identical serial digital signals with embedded audio. The embedded audio group can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. XIO 9030HDEMB-4AUD provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format Select embedded audio group though DIP Switch provides automatic signal equalization for up to 100M (Belden 1694A) Support hot swap plug Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface HD/SD-SDI signal &4ch analog audio embedder Digital Video Input Digital Video Output Input interface 1*HD/SD-SDI, BNC Output interface 2*HD/SD-SDI, BNC Impedance 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s 800mV±5% Max length <100M (Belden 1694A) Jitter <0.2UI (100 KHz) Analog Audio Intput Status indicator Input interface 4*3pin, balance Signal status indicator, Power indicator Max level +24dBu (0dBFs) (Indicate by shining or extinguishing of the green LED) XIO 9030HDEMB-4AUD HD/SD-SDI& 4ch analog audio embedder XIO 9030HDEMB-2AES HD/SD-SDI &2ch AES audioembedder XIO 9030HDEMB-4AUD-FS HD/SD-SDI& 4ch analog audio embedder with frame sync. XIO 9030HDEMB-2AES-FS HD/SD-SDI &2ch AES audioembedder with frame sync. 76 XIO 9030HDEMB-4AUD

79 XIO 9030HDEMB-4AUD-FS HD/SD-SDI& 4ch analog audio embedder with frame sync. Based on brand-new XIO platform, XIO 9030HDEMB-4AUD-FS is a high-quality embedder which embeds two analog audio stereo signals into a single HD/SD-SDI signal, and outputs two identical serial digital signals with embedded audio and frame sync processing. The embedded audio group can be selected freely though DIP Switch. Also embedded mode of audio channels is selectable, such as total embedding left or right channel, following input channels and so on. It supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. XIO 9030HDEMB-4AUD-FS provides automatic signal equalization for up to 100M (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Provide an individual Ref interface and frame sync processing Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format provides automatic signal equalization for up to 100M (Belden 1694A) Support hot swap plug Provide three kinds of sync mode: INT, single EXT, and Global EXT Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface IDigital Video Input Analog Audio Intput Input interface 1*HD/SD-SDI, BNC Input interface 4*3pin, balance Impedance: 75 ohms Max leve +24dBu (0dBFs) Format: SD: 625i50 525i60 HD: 1080i50/60 Digital Video Output 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Output interface Format: 2*HD/SD-SDI, BNC SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 Max length <100M (Belden 1694A) SMPTE 259M-C 270Mb/s Ref In Input type Analog composite video Level SMPTE 292M; 1.485Gb/s 800mV±5% Input interface 1*Ref, BNC Jitter <0.2UI (100 KHz) Standard PAL/NTSC Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) XIO 9030HDEMB-4AUD HD/SD-SDI& 4ch analog audio embedder XIO 9030HDEMB-2AES HD/SD-SDI 2ch AES audioembedder XIO 9030HDEMB-4AUD-FS HD/SD-SDI& 4ch analog audio embedder with frame sync. XIO 9030HDEMB-2AES-FS HD/SD-SDI 2ch AES audioembedder with frame sync. HD/SD-SDI signal &4ch analog audio embedder with frame sync. XIO 9030HDEMB-4AUD-FS 77

80 XIO 9040UC SD-SDI to HD-SDI upconverter and DA Based on brand-new XIO platform, XIO9040UC is a high-quality upconverter which converts one SD-SDI signal to two identical HD- SDI signals with frame sync processing. Meanwhile, the module provides a SDI-loop interface for other applications. It supports AFD and manual ratio adjustment (Bar/stretch/crop). There is advanced de-interlacing technology to generate high-quality HD-SDI signals. Moreover it supports 625i 50, 525i 60 and automatic detection of input format. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Provide an individual Ref interface and frame sync processing Provide three kinds of sync mode: INT, single EXT, and Global EXT Support 625i 50, 525i 60 and automatic detection of input format Provide automatic signal equalization Support bi-direction PAL to NTSC converter Support embedder SDI Support AFD and manual adjustment (Bar/stretch/crop) Support hot swap plug Adjust H-phase and V-phase flexibly Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface SD-SDI to HD-SDI upconverter and DA Digital Input Input interface 1*SD-SDI, BNC 75 ohms Format: 525i60, 625i50, SMPTE 259M-C 270Mb/s Max length <200m (Belden 1694A) Ref In Input type Analog composite video Input interface 1*Ref, BNC Standard PAL/NTSC Digital Loop Output Output interface: 1* SDI Loop, BNC 75 ohms Format: SD: 625i50 525i60 SMPTE 259M-C 270Mb/s Level 800mV±5% Jitter <0.2UI Output interface 2*HDSDI, BNC Impedance 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 800mV±5% Jitter <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) XIO 9040UC XIO 9040UC-KF XIO 9040VSD-HD-DC XIO 9040XC XIO 9040XC-4AUD XIO 9040XC-2AES SD-SDI upconverter and DA Dual SD-SDI signals upconverter HD-SDI downconverter and DA HD/SD-SDI cross converter HD/SD-SDI cross converter with analog audio output HD/SD-SDI cross convertor with digital audio output 78 XIO 9040UC

81 XIO 9040VSD-HD-DC SDI distributor and HD to SD downconverter Based on brand-new XIO platform, XIO9040VSD-HD-DC is a high-quality downconverter which converts one HD-SDI signal to two identical SD-SDI signals with frame sync processing. Meanwhile, the module provides a HDSDI-loop output interface for other applications. It supports AFD and manual ratio adjustment (Bar/stretch/crop). There is advanced de-interlacing technology to generate high-quality SD-SDI signals. Moreover it supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. It can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Provide an individual Ref interface and frame sync processing Provide three kinds of sync mode: INT, single EXT, and Global EXT Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format Provide automatic signal equalization Support bi-direction PAL to NTSC converter Support AFD and manual adjustment (Bar/stretch/crop) Support hot swap plug Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface Digital Input Input interface 1*HD/SD-SDI, BNC 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Max length <200m (Belden 1694A) Ref In Input interface 1*Ref, BNC Standard PAL/NTSC Digital Loop Output Output interface: BNC 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 800mV±5% Jitter <0.2UI Digital Loop Output Output interface 2*SDI, BNC Impedance 75 ohms Format: 525i60, 625i50, SMPTE 259M-C 270Mb/s Level 800mV±5% Jitter <0.2UI (100 KHz) Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) SDI distributor and HD to SD downconverter XIO 9040UC XIO 9040UC-KF XIO 9040VSD-HD-DC XIO 9040XC XIO 9040XC-4AUD XIO 9040XC-2AES SD-SDI upconverter and DA Dual SD-SDI signals upconverter HD-SDI downconverter and DA HD/SD-SDI cross converter HD/SD-SDI cross converter with analog audio output HD/SD-SDI cross convertor with digital audio output XIO 9040VSD-HD-DC 79

82 XIO 9060FS HD/SD-SDI signal DA and frame sync processor Based on brand-new XIO platform, XIO 9060FS is a high-quality frame sync processor which inputs one HD/SD-SDI signal and distributes four HD/SD-SDI signals after frame sync processing and amplification. And the module supports HD/SD-SDI input signal with or without embedded audio. Moreover it supports 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format. XIO 9060FS provides automatic signal equalization and reclocking for long cable applications, which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source. The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately. It supports SNMP. And it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet. Provide an individual Ref interface and frame sync processing Provide three kinds of sync mode: INT, single EXT, and Global EXT Support 625i 50, 525i 60, 720p, 1080i, 1080p, 1080psf and automatic detection of input format Provide automatic signal equalization and relocking Support embedded and non-embedded HD/SD-SDI signal Support hot swap plug Adjust H-phase and V-phase flexibly Provide LED lights to indicate the status of signals and power supply Support SNMP, and can be real-time managed and monitored by XIO NET via Ethernet Widely used in broadcasting system, studios and other professional fields XIO 1U interface 3U interface HD/SD-SDI signal DA and frame sync processor Digital Input Input interface 1*HD/SD-SDI BNC Impedance 75 ohms Format: SD: 625i50, 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C; 270Mb/s SMPTE 292M; 1.485Gb/s Max length: SD-SDI: <200m (Belden 1694A) HD-SDI: <100m (Belden 1694A) Ref In Input type Analog composite video Input interface 1*Ref, BNC Standard PAL/NTSC Digital Output Output interface 4* HD/SD-SDI BNC Impedance 75 ohms Format: SD: 625i50 525i60 HD: 1080i50/60 720p50/ p24/25/ psf24 SMPTE 259M-C 270Mb/s SMPTE 292M; 1.485Gb/s Level 800mV±5% Jitter <0.2UI 100KHz Status indicator Signal status indicator, Power indicator (Indicate by shining or extinguishing of the green LED) XIO 9060FS HD/SD-SDI signal DA and frame sync processor 80 XIO 9060FS

83 XIO 9900MVS-OUT XIO Series output card of Multi-viewer system XIO 9900MVS-Out is the output card of multi-viewer system based on XIO series processing platform. It provides four HD/SD-SDI input signals, and auto detection of input format. One HDMI output signal is achieved with the output resolution up to 1920x1200, which provides high-definition and fluent image. With build-in Web server, display elements can be configured on the web page via RJ45 interface conveniently and rapidly. XIO 9900MVS-Out has the advanced function of signal routing. When there are more than two output cards (including two cards) inside XIO frame, all the HDMI outputs share the whole signal sources, and any signal can be routed to display on any output freely. Rich features combined with flexible modular XIO processing platform make XIO series multi-viewer system widely used in studio, broadcasting room, general control centre, production editing studio and other applications where video/audio monitoring and display are required! Key Feature Support input format of 525i 59.94, 625i 50, 720p, 1080i, and 1080p, and auto detection of input format Support HD/SD-SDI signal with non-embedded or embedded audio signal Output one HDMI signal with output resolution up to 1920x1200 Adopt HDMI interface with fixed socket to avoid the HDMI cable fallen off from the board Embed audio into HDMI signal and the audio source can be selected via Web server Flexible output options:4:3, 16:9, customized aspect ratio Support display of input format and AFD information Editable dual program UMD and 4 channel audio meters display Signal can be routed to display on any output flexibly and conveniently by configuration on the web server Video/audio auto detection and alarming, such as video loss, video frozen, video black, audio silence, audio overload with high rate of accuracy Selectable air timer and countdown timers, analog and digital clocks types Support customized layout to preset various layouts for different application, such as studio, OB van, production room and so on XIO XIO Series output card of Multi-viewer system XIO 9900MVS-OUT 81

84 Product Interface XIO 9900MVS-Out-1R (Apply to XIO 1U frame) XIO 9900MVS-Out-3R (Apply to XIO 3U frame) XIO Product Application Application 1: when one output card is inserted into XIO frame, it provides Multi-viewer system with 4 images. XIO Series output card of Multi-viewer system 82 XIO 9900MVS-OUT

85 Application 2: When there are more than two output cards (including two cards) inside XIO frame, all the HDMI outputs share the whole signal sources, and any signal can be routed to display on any output freely. Product Application Signal Video Input: Interface: 4*HD/SD, BNC HD-SDI input: Impedance: 75 ohms HD: SMPTE 292M;1.485,1.485/1.001Gb/s SMPTE-425;2.970Gps 720p 50/59.94/60; 1080i 50/59.94/60; 1080p 23.98/24/25/29.97/ p 50/59.94/60; Return Loss:>15dB,5MHz to 1.5GHz SD-SDI Input Impedance: 75 ohms Signal type: SMPTE295M 576i 50, 480i Return Loss: >15 db to 270 MHz Signal Level: 800mV ±10% Overshoot: <80mV Jitter: <740ps Rising and Falling Time: <1500ps Rising and Falling Time Different: <500ps DC Level: Signal Video Output: HDMI Output: Interface: Output resolutions: 1024x768, 1280x720, 1280x x1024, 1360x768, 1400x1050 0V±500mV 1*HDMI, type A 1600x1200, 1680x1050, 1920x1080, 1920x1200 Frequency: 50/60Hz Two channel HD/SD-SDI audio signals can be embedded into the HDMI output signal. The audio channels can be selected on the Web server to monitor. Control Interface: Type: 10/100/1000M auto-adapting Support tally via RJ45 interface 1*RJ45 XIO XIO Series output card of Multi-viewer system Ordering Information XIO 9900MVS-Out XIO Series output card of Multi-viewer system-4xhd/sd-sdi signals input, 1x HDMI signal output, and 1xRJ45 for Web control. XIO 9900MVS-OUT 83

86 MRS 1616-HS Series 16x16 SD/HD Smart Router Series The MRS16XX-HS SD/HD SDI series is a compact, high-quality, and low-cost digital video router, suited for small to medium-sized broadcasting systems, designed by Gefei-Tech. The MRS16XX-HS adopts field blank switching, allowing it to accept external sync. The main unit is a dual-powered 1U chassis, which can be simultaneously controlled by two separate remote control panels; through RS232 users can control the host with the software on a PC. MRS 20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting Support independent 16 channel bus outputs, and SD/HD inputs auto senescing Support external BB using field vanishing switching processing to ensure the switching without flicker and noise The host can be configured to support simultaneously controlled by two RCP through RS485 Convenient to control by software through RS232 1U chassis, with dual power 16x16 SD/HD Smart Router series MRS 1601-HS Host input interface Input 16*SD/HD-SDI Host output interface Output 1*SD/HD-SDI Amplitude 800±5% Jitter <0.2UI Format 525i30 625i25 720P50 720P60 720P60/M 1080i i i60/M 1080sf sf24/M1080P241080P24/M 1080P P30 BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm 84 MRS 1616-HS Series

87 MRS 1604-HS Host input interface Input 16*SD/HD-SDI Host output interface Output 4*SD/HD-SDI Amplitude 800±5% Jitter <0.2UI Format 525i30 625i25 720P50 720P60 720P60/M 1080i i i60/M 1080sf sf24/M 1080P241080P24/M 1080P P30 BB input Input 1*BBPAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm MRS 1608-HS Host input interface Input 16*SD/HD-SDI Host output interface Output 8*SD/HD-SDI Amplitude 800±5% Jitter <0.2UI Format 525i30 625i25 720P50 720P60 720P60/M 1080i i i60/M 1080sf sf24/M 1080P P24/M 1080P P30 BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm MRS MRS 1616-HS Host input interface Input 16*SD/HD-SDI Host output interface Output 16*SD/HD-SDI Amplitude 800±5% Jitter <0.2UI Format 525i30 625i25 720P50 720P60 720P60/M 1080i i i60/M 1080sf sf24/M 1080P P24/M 1080P P30 BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm 16x16 SD/HD Smart Router series MRS 1616-HS Series 85

88 MRS 1616-S Series 16x16 SD SDI Smart Router Series MRS1616-S SD SDI series is a kind of digital signal switcher with high quality and low cost, which suits for middle-small sized broadcasting system, designed by Gefei Tech. The switching system adopts field blank switching, supplies independent external sync. interface,the separation of the host and remote control panel makes it more convenient to use. The host is 1U chassis, with dual power, which support simultaneously controlled by two remote control panels; through RS232 user can control the host by professional software on PC. MRS 20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting Support independent 16 channel bus outputs Support external BB using field vanishing switching processing to ensure the switching without flicker and noise The host can be configured to support simultaneously controlled by two RCP through RS485 Convenient to control by software through RS232 1U chassis, with dual power 16x16 SD SDI Smart Router series MRS 1601-S MRS 1601-S Host input interface Input 16*SD-SDI Format 525i30 625i25 7 Host output interface Output 1*SD-SDI Amplitude 800±5% Jitter <0.2UI BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm 86 MRS 1616-S Series

89 MRS 1604-S Host input interface Input 16*SD-SDI Format 525i30 625i25 Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Host output interface Output 4*SD-SDI Amplitude 800±5% Jitter <0.2UI BB input Input 1*BBPAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm MRS 1608-S Host input interface Input 16*SD-SDI Format 525i30 625i25 Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Host output interface Output 8*SD-SDI Amplitude 800±5% Jitter <0.2UI BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm MRS MRS 1616-S Host input interface Input 16*SD-SDI Format 525i30 625i25 Host output interface Output 16*SD-SDI Amplitude 800±5% Jitter <0.2UI BB input Input 1*BB PAL/NTSC Host controller interface Connector 1xRS232 DB9 male 2xRS485 BNC Power 2X120W Dimensions 44 mm x440 mm (19Inch)x320 mm Remote controller panel interface Connector 2xRS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm 16x16 SD SDI Smart Router series MRS 1616-S Series 87

90 MRS 3232-HS 32x32 SD/HD Smart Router Series MRS3232-HS SD/HD SDI series is a kind of digital signal switcher with high quality and low cost, which suits for middle-small sized broadcasting system, designed by Gefei Tech. The switching system adopts field blank switching, supplies independent external sync. interface,the separation of the host and remote control panel makes it more convenient to use. The host is 1U chassis, with dual power, which support simultaneously controlled by two remote control panels; through RS232 user can control the host by professional software on PC. MRS 32x32 SD/HD Smart Router series 20 bit digitization processing, high quality, high stability, to ensure the safety and reliability of broadcasting Support independent 32 channel bus outputs, and SD/HD inputs auto senescing Support external BB using field vanishing switching processing to ensure the switching without flicker and noise The host can be configured to support simultaneously controlled by two RCP through RS485 Convenient to control by software through RS232 3U chassis, with dual power 88 MRS 3232-HS

91 Host input interface Input 32*SD/HD-SDI Format 525i30 625i25 720P50 720P60 720P60/M 1080i i i60/M 1080sf sf24/M 1080P241080P24/M 1080P P30 Host output interface Output 32*SD/HD-SDI Amplitude 800±5% Jitter <0.2UI BB input Input 1*BB PAL/NTSC Host controller interface connector 1xRS232 DB9 male 4*RS485 BNC Power 2X120W Dimensions Size: 44 mm x1320 mm x80 mm IMRS-XY Remote controller panel interface Connector 2x RS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm MRS MRS 3201RCP Remote controller panel interface Connector 2x RS485 BNC Power 1X2.5W Dimensions Size: 44 mm x440 mm x80 mm Ordering information MRS 1616-HS 16x16 HD & SD router,w/ remote control panel MRS 1608-HS 16x8 HD & SD router,w/ remote control panel MRS 1604-HS 16x4 HD & SD router,w/ remote control panel MRS 1601-HS 16x1 HD & SD router,w/ remote control panel MRS 1616-S 16x16 SD router,w/ remote control panel MRS 1608-S 16x8 SD router,w/ remote control panel MRS 1604-S 16x4 SD router,w/ remote control panel MRS 3232-HS 32x32 HD & SD router,w/ 1 X+Yremote control panel MRS-XY X+Y Remote control panel for MRS 32xx Series and MRS 16x16 Series MRS3201 RCP 32inputs select and 1output for MRS 32x32HS 32x32 SD/HD Smart Router series MRS 3232-HS 89

92 Magi Stream3000 Video server MagiStream3000 is designed for television broadcast system, as a convenient,cost-effective, broadcast quality and mission-critical reliability transmission server,magistream3000 has more than 600 channels users up to now. MagiStream3000 supports multiple media format file, the convenience communicate with the non-linear editing system, MAM system, etc; supports SNMP, can be configured and monitored real-time through network. Based on the enterprise server hardware structure, MagiStream3000 adopts modular structure, it supports up to six output channels. SD/HD output modules can be mixed in one chassis, Every moudule is configured with 3ch HD/SD program outputs,one cue frame output,and one preview output. It support cross conveter accroding to the AFD information and support embedded designated information manual. MagiStream3000 configured with 3 Gigabit Ethernet interfaces,selectable SAS/FC RAID storage connector.dual-parity RAID ensures that the system continues to operate even in the event of simultaneous failure of any two disk drives. Video I/O modules and redundant power supplies can be hot-swapped for uninterrupted operation.magistream3000 fully meets the requirements of safe broadcasting for 24*7. Magi Video server Modular structure, HD/SD module selectable, up to sic channels, support mixed interpolation Open and share platform High compatibility, Supports various file format, mpeg-2, PS, ES, GXF, MXF etc. Based on CPCI server architecture, stronger IO processing power to deal with data processing Meet the multichannel \ various decoding application occasion Support cue frame output, operator can preview the first frame of next program Support AFD, auto cross convert, bar, letter or stretch selectable Embedded operating system, high reliability and stability Redundant power supplies Support SNMP More than 600 channels More than 600 channels 90 Magi Stream3000

93 Interface IChassis D x W x H (mm): 440 x 177 x 320 mm (17.3" x 7" x 12.6") Front Control: Power On/Off System Reset Alarm Mute Indicator: Power Status HDD Activity LAN Activity FAN / Overheat Failure Fans: 2 (front: 193 CFM, rear: 61.3 CFM) PSU: AC 100 ~ ~ 60 Hz, full range Temperature : 0 ~ 45 C (32 ~ 113 F) Humidity : 20 ~ 40 C, non-condensing Shock: 10 G Magi Raid storage SCSI\FC\SAS connector selectable Program output Cue frame output Preview output 3*HD-SDI/SD-SDI, BNC connector, 75 ohms 1*HD-SDI/SD-SDI, BNC connector, 75 ohms 1*SD-SDI Format SD SDI: SMPTE 259M, ITU-R601, 525/625 line component, 10-bit MPEG-2@ML 4:2:0, IBP & Long GOP 2-15 Mb/s 4:2:2, IBP & Long GOP 4-50 Mb/s HD-SDI: SMPTE 292M, 10-bit MPEG-2@HL 4:2:0, IBP & Long GOP Mb/s 4:2:2, IBP & Long GOP Mb/s BB input 1*CVBS BNC connector, 75 ohms SMPTE 259M 270Mbps Video server Audio output 8CH*AES/EBU, 26DB female connect, 48 khz sample rate Software Magi Live V5.0 MTBF Backplane 800,000 hours Fan module 50, C Power supply 100,000 70% load Compliance RoHS, CE, FCC, UL, CCC Magi Stream

94 Magi Con Centralized Monitoring System by SNMP Magi Con Comprehensive intelligent monitoring system supplies detection, management and maintenance of studios, broadcasting centre and relative equipments. It can monitor the equipment working status and deal with stoppage intelligently which in order to get the operation condition, to prevent equipment stoppage and improve the management level. Especially, using the professional XIO9050HSM to monitor the node signal real-time, we can get more than 20 kinds of common indicators which guarantees the broadcasting quality. Features Magi Centralized Monitoring System by SNMP Based on SNMP protocol, supports network port and serial port Multiple monitoring method, room layout, rack layout, CAD etc. To monitor the working status of equipment and node signal,technology and intelligent strategy analysis, make sure whether the system working condition is normal When something wrong happens, it can be located quickly and gives the alarming through graphic or voice to help operator deal with failure, create the analysis log and alarm log Professional hardware detection card with professional software, the perfect combination Support 3D interactive flash, let users have a new experience Directly import dxf format files generated by AutoCAD to establish monitoring flow graphic when there is something wrong occurs, the alarming information will show on the system diagram and graphic color changed The program supplies drawing tool, users can draw monitoring system diagram freely Intelligent fault location, quickly find the fault in the link source Multiple range alarming level, showing the way, the key link level, regional level Monitoring in separate categories, to ensure the division and personnel security The equipment failure memory, users can add the problem solutions to enrich the content 92 Magi Con

95 Monitoring and management of equipment work status Supported equipment manufacturers Magi Signal quality monitoring XIO9050 HSM Centralized Monitoring System by SNMP Magi Con 93

96 Magi Software UI Centralized Monitoring System by SNMP 94 Magi Con

97 Magi Smart IN TS over IP signal ingest system MagiSmartIn is designed for multi-channels recording signals came from satelite,digital cable TV,or SDI/HDSDI. It adopts Magi SmartGate series modules multimedia processor as a convert from QPSK / QAM / ASI/SDI/CVBS signals to the TS over IP, with 4-channel recodering server cluster and Magi SmartDB database server, based on network,magi SmartIN ingest system can achieve a large number IP stream automatically recording, management and data distribution. Modular System Every function modular can be seamless extend Full signal source QPSK QAM ASI HD/SD-SDI AV Open System Based on WEB service and standard XLM/FTP/UDP/HTTP protocol Support video file formats such as DV25, DV50, DVCPRO HD, MPEG2, WMV, MPEG4,H.264, AVI,etc. Safety system Import program can ingested using different recorder server at the same time Base on DVB-C TR level monitoring by IP multi-viewers Centralized device work status monitoring by SNMP Easy to use Kindly software UI System structure Magi Centralized Monitoring System by SNMP Magi Smart IN 95

98 Work flow kindly Software UI Magi TS Over IP ingest and distrbute system List Edit 4 CH ingest InquiresbrowseEditor Migration 96 Magi Smart IN

99 Magi Live Professional program automation and master control solutions Magi Live is a professional program automation system, with independent intellectual property rights, includes media ingest, media management, playout automation, file based quality assurance (QA) workflow, system monitoring and so on. We can supply all series broadcast product line, like video server, matrix, switching, signal processing peripheral, logo, CG, keyer, all of the broadcast control system software and hardware product. Unique media ingest with quality assurance and ALC Video servers are relatively independent with play controller The automatic quality assurance technology based on documents judge is to ensure the key broadcast programming material safety, In the process of program file upload doing the synchronously automatic technology review is very efficiency. The Video server broadcast don t completely dependent on play controller, even if the master and slave controller machines strike simultaneously,video server still continue to work without affected Inteligent closed-loop process monitoring ensure broadcast safe Magi Real time work status monitoring for the broadcast system equipment Real-time audio alarm Timely alarm signal degradation File based quality assurance (QA) workflow Automatic quality check following program upload MD5 check file reviewed by software Preview before playout signal quality monitoring HD/SD compatible, convenient to upgrade by business expansion Supports many world famous video server and peripheral equipment Provide different configuration solution More than 600channels users Professional Program Automation and Master control solutions Magi Live 97

100 Magi Spy TV signal monitoring and recording system MagiSpy is designed for monitoring and recording multi-channel audio and video signals. It's widely applied to monitoring broadcast quality errors, such as black video, freeze, signal lost,etc. if happened, the system will trap voice alarm and log. MagiSpy supports monitoring and recording up to 4~32 channels program by single server. In addition, MagiSpy supply querying the recorded materials to check the contents. MagiSpy is compatible with Gefei's autoplay system, so it can realize querying the recorded files or alarm logs according to the program play list. MagiSpy is your perfect choice for TV signal monitoring User-friendly interface Using the latest h.264 compression technology hardware decoding Up to 4-32 channels program by single server Multi-viewer layout can be designed freely Optional manual and automatic recording way Monitor and voice alarm for abnormal signal, black, frozen frame, video loss, audio loss Support query materials or logs by Webpage remotely (Optional) Easy alarm query, supports key word and mixed conditions Various querying broadcasted errors Automatically deleted expired materials Applations Magi TV signal monitoring and recording system Chassis 3U DP, 12 x H/S HDDs, SAS/SATA BP, Ideal For Enterprise Storage Server D x W x H (mm): 660 x 430 x 132 (mm) Hot-Swap 3.5": 12 (SAS/SATA) Front Control: Power On/Off System Reset Alarm Mute Indicator: Power Status HDD Activity (x1) LAN Activity (x2) FAN / Overheat Failure Fans: 80 x 80mm T25mm fan PSU: 650W 2+1 Redundant Server OS: Windows XP + SP2 CPU:XOEN E GHZ CPU Memory:46GB DDR3 RDIMM System HDD :500GB SATAII DVDROM network interface :1x Broadcom 5709 Dual Port 1GbE NIC 2*1Gb RJ45) Display adapter HD4830 Raid (Optional) Raid host controller Encoder Card Magi CG DS Series Video format: H.264 (MPEG-4/Part 10) compression Audio format: OggVorbis, 16Kbps compression Video Input Interface: BNC (1.0Vp-p, 75 Ohm) Audio Input Interface: BNC(2.0Vp-p, 1K Ohm) Compression Resolution: 4CIF/DCIF/2CIF/CIF/ QCIF Recording Frame Rate: 4CIF:10-12fps DCIF:20-22fps 2CIF:2CIF/CIF:25(P)/30(N)fps Video Bit Rate: 32Kbps~2Mbps adjustable Software Magi Spy V2.0 MTBF 1.2 million hours 98 Magi Spy

101 99 Magi

102 About GeFei Company Branch Magi Business Domain 100 About GeFei

103 About GeFei Quality Control Magi Users About GeFei 101

104 ELPRO Video Labs s.r.l. Expert in Video Signal Management Strada della Pronda, 45/B Torino - Italy Tel Fax VAT IT [email protected]