3G/HD/SD/ASI/AES/RS-422 Routing Switcher MFR G/HD/SD/ASI/AES/RS-422 Routing Switcher MFR-5000

Transcription

1 G/HD/SD/ASI/AES/RS- Routing Switcher MFR-000 G/HD/SD/ASI/AES/RS- Routing Switcher MFR-000

2 G/HD/SD/ASI/AES/RS- Routing Switcher The MFR-000 Series is a group of multi-format routing switchers supporting G-SDI, HD-SDI, SD-SDI, ASI, AES and RS-. Inside the U case a matrix of up to inputs/ outputs can be configured. It offers expansive flexibility at the core of your system, such as tally connections with peripheral devices (video switchers and multi viewers) and automatic source name tracking. Multi-Format Support Video input/output card MFR-SDI/SDIA: -input card enables support for G/HD/SD-SDI and ASI MFR-SDO: -output card enables support for G/HD/SD-SDI and ASI Audio input/output card MFR-AESI: MFR-AESI: Input card for AES/EBU stereo pairs ( channels) MFR-ADI: MFR-ADI: Input card for AES/EBU stereo pairs with SRC MFR-AESO: Output card for AES/EBU stereo pairs ( channels) MFR-ADAO: Audio output card for up to stereo pairs with D/A converter ( channels) MFR-AAI: Input card for analog audio with A/D converter RS- serial control I/O card MFR-DTIO: RS- serial control input/output card compliant with the SMPTE 0M standard Outstanding Redundancy Since routing switchers are the core of large video systems, we have engineered a variety of features to ensure full redundancy. Redundancy Features CPU board redundancy (option): a secondary CPU board constantly monitors the operation of the primary board. If the secondary CPU board detects any faults, operation is immediately switched to the secondary CPU to allow for continuous operation without down time. Redundant power supply (option): in the rare event of a power supply problem, the second supply takes over to avoid any interruption of router function. Network redundancy (option): a secondary Ethernet connection provides back-up for system control. With CPU redundancy, each interface can also have a backup (for details see below). Direct control of main unit: the main unit has an LED display on the front. It can display settings and alarms. Interface details Connector Standard configuration With redundant CPU installed Ethernet RJ- Serial pin D-sub (male) Alarm output pin D-sub (female) ARCNET BNC Outstanding Maintainability Designed for maintainability, all boards and power units can be accessed from the front without removing cables. Configuring Matrices (up to Input/ Output) The input/output board has channels and up to boards can be installed together. As a result, matrices of up to input/ output can be configured. Various Crosspoint Control A variety crosspoint control features are possible in addition to normal crosspoint switching. Salvo function () Button-assigned Salvo: multiple crosspoints can be assigned to any button. Separate settings can be made for each remote unit. () Main unit storage Salvo: multiple crosspoints can be stored on the main unit side and shared by all remote units. Take operation: after presetting crosspoints, press the Take button to change the set crosspoints. () Mode-switching Take button: switches between take operation and usual operation (instant execution). () Always Take button: always performs take. Link function: this can group and link multiple crosspoints. Level operation: level switching allows separate control over different subject types. Chop function: allows user to switch between two sources for a destination. Monitor out: enables output of any destination source to a dedicated monitoring channel. Prevention of incorrect operation: - Inhibit: Crosspoint, Source, Destination - Lock: Lock Other / Lock All / Lock Local Matrix Partition Function One routing switcher can be virtually partitioned to build any theoretical hierarchy, creating possibilities for use in various operations. Examples: K/K capable routing switcher: simultaneous multiple crosspoints switching enables supporting K and K signals. Fully independent switching: a single unit can be used as multiple routing switchers by making multiple matrix partitions. This is effective when you wish to do multiple operations while avoiding source sharing. V/Key linking switcher: allows two inputs to be linked for routing of video and key signals together. D switcher: partition the matrix in two and control the left and right channels from a D source simultaneously. K/HD simul-switcher: provides simultaneous control of K and HD sources. Perfect feature for K/HD master control switching. SNMP Support Remote monitoring by SNMP is supported and the router can easily be integrated into an SNMP monitoring system. In this way you can monitor the status of various items including: power source, fan, CPU, presence/absence of signals, crosspoint errors and more.

3 Remote Control Units We offer several types or remote control to suit your application. The number of units that can be connected is a maximum of, including the main unit. This lets you build a flexible control environment by the way you partition the matrix and make operation level settings. MFR-RUA: MFR-RUA: U compact type buttons: light in colors (red/green/orange) Equipped with OLED display that can show source name and assigned functions for each button (-color: red/green/yellow/blue/white/cyan/magenta) Any function can be assigned to any button Power source redundant (AC adapter) MFR-RU: U type buttons: buttons in rows. Buttons with OLED display that can show source names or assigned functions (-color: red/green/yellow/blue/white/cyan/magenta) Apart from the main buttons, there are function buttons that can be freely assigned (Light in colors: red/green/orange) Equipped with display showing information of current sources, destinaions, and pages Ideal as a main control unit covering the entire crosspoint set-up Power source redundant (AC adapter) U compact type buttons: light in green only Any function can be assigned to the buttons MFR-RUD: MFR-RUW: U compact type buttons: light in green only Any function can be assigned to the buttons U compact type buttons: lights in green only Any function can be assigned to the buttons Equipped with a display showing status and setting menu display MFR-0RU: U compact type 0 buttons: light in colors (red/green/orange) Any function can be assigned to any button Power source redundant (AC adapter) MFR-RUTA MFR-RUW: U compact type buttons: light in green only Any function can be assigned to the buttons MFR-RUW: U compact type buttons: light in green only Any function can be assigned to the buttons MFR-RULK U half size tabletop model buttons: light in colors (red/green/orange) Any function can be assigned to any button Equipped with OLED displays light in colors (red/green/yellow/blue/white/cyan/magenta) Option unit for remote MFR series operation U half size Offers network-based remote cotrol by setting the unit at the control-end

4 Interface Expansion Unit The interface expansion unit lineup includes two types to suit your specific application. The number of units that can be connected is a maximum of, including the remote control units. MFR-GPI: GPI Unit MFR-TALM: Tally Manager Provides an interface for GPI control. This RU sized unit is equipped with user-assignable GPI/O ( channels) and serial ports (-pin D-sub male). It can be used for setting Input/Output and supports system configuration. MFR-TALM is a device for performing central management of tally and material names of the MFR main unit and peripheral devices (such as video switchers and multi viewers). In the tally linking system like the one shown to the right (Fig. ), MFR-TALM performs the tally calculation, which were originally performed by the MFR main unit, so that the tally linking can be speeded up. Supports Combinations of Multiple Remote Control Units Multiple remote control units can be combined to make them function as a large scale control panel. Combination example: For x full control + system settings: MFR-0RU x + MFR-RUA x SYSTEM SETTG System Links with Other Products The MFR-000 enables tally linking with FOR-A s video switcher HANABI Series and multi viewer MV Series. And when switching between sources on the MFR-000 side, the source name displayed by the video switcher or multi viewer can also change automatically. It supports TSL and Harris protocol, enabling linkage with rd party equipment. SDI REF- REF-TH From System SDI PGM monitor SDI Routing Switcher MFR-000 Tally data Name information Video Switcher HVS-000 PREV monitor MFR-GPI MFR-RU MFR-RUD Tally/name data RS- /// MV monitor MV monitor MFR-0RU MFR-RUA REF- Tally/name data Multi Viewer MV-00 MV monitor MFR-TALM MFR-RUA Ethernet Hub Ethernet Hub GUI MV monitor

5 SERVICE GPI SERVICE GPI GPI GPI GPI ON OFF ON OFF CPU REMOTE COMTROL UNIT A B C D DEST PAGE MESSAGE/MEN U DCV DCV ACTIVE REMOTE CONTROL UNIT MFR-RUW REMOTE CONTROL UNIT MFR-RUW REMOTE CONTROL UNIT MFR-RUW SRC DCV - DCV - CPU MESSAGE/MEN U ACTIVE RG SWITCHER MFR-000 SERVICE DCV MONITOR (SDI ) REF PAGE PAGE ENTER CANCEL 0 REMOTE CONTROL UNIT 0 0 DCV MFR-LA N (CPU) (CPU) (CPU) (CPU) REMOTE CONTROL UNIT REMOTE CONTROL UNIT REMOTE CONTROL UNI T MFR-0RU ARCNET G/HD/SD-SDI PUT SLOT G/HD/SD-SDI PUT REF GPI MFR-000 External Dimensions MFR-000 Rear Panel t AC00-0V 0/0Hz AC00-0V 0/0Hz. MFR-RU 0 0 MFR-RUW External Dimensions MFR-RU External Dimensions MFR-RUD 0 0 MFR-RUW External Dimensions MFR-RUD External Dimensions RATG LABEL RATG LABEL MFR-RUW/RUW Rear Panel MFR-RU/RUD Rear Panel. 0 MFR-0RU External Dimensions 0 MFR-RUA MFR-RUW External Dimensions 0 MFR-RUA External Dimensions RATG LABEL MFR-RUW Rear Panel MFR-0RU/RUA Rear Panel RATG LABE L. MFR-RUA MFR-RULK REMOTE CONTROL RELAY UNIT REF GPI RS MFR-RULK External Dimensions.... MFR-RUA External Dimensions RS- DCV RATG LABEL REF GPI SER. NO. MFR-RULK Rear Panel MFR-RUA Rear Panel GPI UNIT MFR-GPI MFR-TALM TALLT MANAGER UNIT MFR-TALM External Dimensions.... MFR-GPI External Dimensions DCV RATG LABEL REF GPI SER. No. MFR-GPI Rear Panel MFR-TALM Rear Panel

6 MFR-000 Specifications Video format G: 00/0p, 00/.p, 00/0p HD: 00/0i, 00/.i, 00/0i, 00/0p, 00/0PsF, 00/.p, 00/.PsF, 00/.p, 00/.PsF, 00/p, 00/PsF, 00/p, 00/PsF, 0/0p, 0/.p, 0/0p SD: /0, /0 Matrix size Min. x to Max. x + monitor out x Number of input slots:, Number of output slots: (Expandable on a -channel basis) Video input MFR-SDI MFR-SDIA Cable Equalization Video output MFR-SDO SDI input card: Ω, BNC x (max. cards) Compliant with the following (Ω, BNC) - SMPTEM (. Gbps,./.00Gbps) - SMPTEM (. Gbps,./.00 Gbps) - SMPTEM (0 Mbps) - DVB-ASI G/HD-SDI: 00 m (C-FB cable (Belden A)) SD-SDI: 00 m (C-V cable (Belden )) SDI input card: Ω, BNC x (max. cards) Compliant with the following (Ω, BNC) (Auto reclocking) - SMPTEM (. Gbps,./.00Gbps) - SMPTEM (. Gbps,./.00 Gbps) - SMPTEM (0 Mbps) - DVB-ASI Monitoring output G/HD/SD-SDI, DVB-ASI: Ω BNC x (Auto reclocking not supported) Audio input MFR-ADI AES/EBU audio input card with SRC (max. cards) - BNC x ( stereo pairs, channels) - Ω BNC - Sampling Frequency: khz,. khz, khz, khz MFR-AAI Analog audio input card with A/D converter (max. cards) - -pin D-sub (female) x ( stereo pairs, channels) - Balanced or unbalanced, 00Ω or high impedance - Sampling frequency: khz MFR-AESI AES/EBU audio input card (max. cards) - BNC x ( stereo pairs, channels) - Ω BNC Audio outputs MFR-ADAO MFR-AESO Embedded/AES/Analog audio output card (max. cards) AES/EBU (synchronous only) - BNC x ( stereo pairs, channels) - khz Embedded audio (00/.i or 00/0i) - BNC x ( stereo pairs, channels) - Unbalanced, khz Analog audio - -pin D-sub (female) x ( stereo pairs, channels) - Balanced or unbalanced, less than 00Ω, khz AES/EBU audio output card (max. cards) - BNC x ( stereo pairs, channels) - Ω BNC RS- data input/output MFR-DTIO RS- data input/output card (max. cards) Date rate: max.. kbps -pin D-sub (female) x Reference input BB: 0. Vp-p (NTSC) / 0. Vp-p (PAL) or Tri-level Sync: ±0. Vp-p Ω BNC x, loop-through (terminate with Ω terminator, if unused.) Interfaces 0/00/000 Base-T, RJ- x (for connecting up to RU/GPI units.) (Second LAN port used in redundant CPU configuration) 0/00 Base-TX, RJ- x (for PC operation) (Second LAN port is used in the redundant CPU configuration) ARCNET / ARCNET Unused RS-C/RS- (internal switch), -pin D-sub (male) x -pin D-sub (female) x (input: reset, output: power, fan alarm) Temperature/humidity 0 to 0 / 0% to % (no condensation) Power 00 VAC to 0 VAC ±0%, 0/0Hz x Consumption x input/output, dual CPU/redundant power unit (maximum configuration): 0 VA ( W) at 00 to 0 VAC VA ( W) at 0 to 0 VAC Dimensions 0 (W) x (H) x 0 (D) mm, EIA RU Weight 0 kg (with full options) Accessories Operation manual, Setup guide, AC cable with retaining clip, Rack mount brackets, Power switch faceplate Consumables Power supply unit: Replace every years Fans P-, P-, P-0, P-: Replace every years Options - MFR-RU: Remote control unit ( buttons) - MFR-RUD: Remote control unit ( buttons, LCD display) - MFR-RUTA: Remote control unit ( buttons, OLED display) - MFR-RUW: Remote control unit ( buttons) - MFR-RUA: Remote control unit ( buttons, OLED display) - MFR-RUW: Remote control unit ( buttons) - MFR-RUA: Remote control unit (OLED buttons, buttons, menu display) - MFR-0RU: Remote control unit (0 buttons) - MFR-RUW: Remote control unit ( buttons) - MFR-GPI: GPI unit - MFR-TALM: Tally manager - MFR-CPU: Redundant CPU card - MFR-PS: Redundant power supply unit - MFR-SDI/SDIA: SDI input card - MFR-SDO: SDI output card - MFR-ADI: Digital audio input card with SRC - MFR-AAI: Analog audio input card with A/D converter - MFR-ADAO: Audio output card with D/A converter - MFR-AESI: AES audio input card (AES/EBU stereo pairs) - MFR-AESO: AES audio output card (AES/EBU stereo pairs) - MFR-DTIO: Data Router card (-pin D-sub x, RS-) ISO 00 and 00 certified (Sakura R&D) Head Office: -- Ebisu, Shibuya-ku, Tokyo 0-00, Japan FOR-A Corporation of America: Tel: +--- FOR-A UK Limited: Tel: +-(0)0-0- Knott Ave. Suite G&H, Cypress, CA 00, U.S.A. FOR-A Corporation of America East Coast Office: Tel: Trident Court, Oakcroft Road, Chessington, KT BD, UK FOR-A Italia S.r.l.: Tel: /0 Executive Drive, Suite 0, Fort Lee Executive Park, Fort Lee, NJ 00, U.S.A. FOR-A Corporation of America Distribution & Service Center: Tel: Via Volturno,, 0, Brugherio MB, Italy FOR-A Corporation of Korea: Tel: +-(0) N.E. Waldo Road, Gainesville, FL 0, U.S.A. 00, -, Yangsan-ro, Yeongdeungpo-gu, Seoul 0-0, Korea FOR-A Corporation of America Miami Office: Tel: FOR-A China Limited: Tel: +-(0) Blue Lagoon Drive, Suite 0, Miami, FL, U.S.A. 0B Huateng Building, No. 0, District, Jinsong, Chaoyang, Beijing 000, China FOR-A Corporation of Canada: Tel: FOR-A Middle East-Africa Office: Tel: +-(0)--0 A, Leslie Street #0, Toronto, Ontario, MC L, CANADA Dubai Media City, Aurora Tower, Office 0, P.O. Box 0, Dubai, UAE FOR-A Europe S.r.l.: Tel: Agiv (India) Private Limited (FOR-A India): Tel: +--- Via Volturno,, 0 Brugherio MB, Italy nd Floor, Valecha Chambers, Link Road, Andheri(W), Mumbai FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company Ltd. Design and specifications subject to change without notice. Printed in Japan. NPE