SS Outdoor/Indoor Portable Scoring System. Universal Sport

Transcription

1 SS-5000 Outdoor/Indoor Portable Scoring System Universal Sport

2 CONTENTS Introduction Edge Scoring Systems... Package Contents... Features Setup & Transport Recommended Display Position... Prop Rod Setup... Fence Mounting... Wall Mounting... Transport... Sponsor Advertising Panel... Notes about the Scoring System Connections & Controls Power Connections... On/Off Button... Charging the Internal Battery Pack... Using External Power Source Operation Instructions Advanced Operations Specifications Remote Control... Button Overview... Running the Timer... Horn Operations... Changing the Period... Changing the Score... Setting the Timer... Powering Down the Scoring System... Low Battery Indication... Settings Menu... 9 Circuit Intervals (Practice Mode) Time of Day Clock Specifications

3 INTRODUCTION Edge Scoring Systems Edge Scoring Systems use the most sophisticated microprocessor and LED drive technology available. Each clock is designed to provide accurate timing and scoring features consistent with the high demands of sporting events. Package Contents Carefully inspect the carton for shipping damage before unpacking. If significant damage is found, keep all packaging and contact your shipper or Befour immediately. Claims must be filed with the shipper as soon as possible after receipt of damaged goods. The scoring system has been packaged in one carton and contains the following components: Scoreboard display Remote control & 9V alkaline battery Smart battery charger Accessory bag containing instruction manual, fence chain, support stakes Protective cover/sponsor advertising panel If any optional accessories are ordered with your system they may be shipped in the same package; the optional tripod kit is shipped in a separate carton. Features Day-Bright LED Digits: Easily readable from most angles, even in direct sunlight. Wireless Control: Radio controlled remote is easy to use and allows control of the scoring system from any location, with a range of approximately 300 feet. Multi-Sport Timing and Scoring: Clock can operate as a countdown timer, count up timer, circuit interval timer, stopwatch, and time of day clock. Loud Horn: Piercing through crowd noise, the 106dB horn sounds automatically at the end of each period (countdown timer mode). Volume is easily adjustable. Mounting Options: Set up your system on the ground or other flat surface with the built-in prop rods. Also equipped with hanging brackets, your scoring system can be mounted on a fence or a wall. The optional tripod kit elevates the system to 7 feet above the ground. 1

4 SETUP & TRANSPORT Recommended Display Position The Edge SS-5000 is designed with Day-Bright LED digits that are easily visible in sunlight. For best contrast and viewing angle, avoid placing the display in direct sunlight. Your viewing position may affect the intensity of the display when outside of the recommended viewing area Horizontal Viewing Area Top View Vertical Viewing Area Side View Prop Rod Setup Built-in prop rods, located on the back side of the scoreboard display, allow the system to be placed on the ground or other flat surface. From the bottom, lift up and rotate the prop rods outward until perpendicular to the back of the display. Place the support stakes into the ground with the hooks over the prop rods to secure. Your scoreboard should remain upright in moderate wind conditions. Fence Mounting A set of short chains and hooks are provided to assist in mounting the scoring system onto a fence. Place the chain hook into the key-shaped brackets on the back of the system; hang the other end of the hook onto the fence. Wall Mounting If the scoring system will be mounted on a wall, use the key-shaped brackets on the rear of the display to hang on the wall. Take note that the screws and wall must support the full weight of the scoring system.

5 Transport An integrated handle allows the scoring system to be easily carried like a briefcase. A protective cover is included and can be snapped onto the system to protect the display window during transport. The small ditty bag can be used to store the remote control, support stakes, and other accessories. Sponsor Advertising Panel The protective cover can also be used as a sponsor advertising panel; the back side is white and can be screened with the sponsor information. Multi-position placement allows the panel to be mounted in many locations, such as a fence, bleachers, wall, etc. Notes about the Scoring System Display Window To minimize glare, place the scoreboard in a location where sunlight does not shine directly on the display window. The display window is constructed of a thick polycarbonate that will withstand minor impact from such objects as a soccer ball, football, etc. Remote Control The range of the remote control may be affected by trees, buildings, and vehicles. Keep this in mind while setting up your scoring system. Environmental Effects A light rain shower should not damage your scoring system, as it was designed to be splash and moisture resistant. However, it was not designed for snow or heavy rainfall and could be damaged in such a setting. Condensation may form inside the system if subject to excessive moisture. 3

6 CONNECTIONS & CONTROLS Power Connections Edge Scoring Systems have multiple options to power the display. An internal rechargeable battery pack is the main supply. In addition, an approved external power source can also be used and are available as options for your system. All power connections are located on the left side of the scoreboard display, toward the bottom Item HORN VOLUME ON/OFF BUTTON CHARGING PORT EXTERNAL POWER INPUT Description Rotate dial in either direction to adjust horn volume. Turns the scoring system on or off when using battery power. Connect the smart charger to charge the internal battery pack. Input for an external power source such as an AC adapter. Using this port will not charge the internal battery pack. Left side of display On/Off Button If the scoring system display is currently off, press and hold the ON/OFF button for a few seconds to turn the scoreboard on. If currently on, press and hold the button to shut off the display. The ON/OFF button is disabled when using an external power source, with the following exception: Press and hold the ON/OFF button while unplugging the external power source to transfer power to the internal battery pack. If the ON/OFF button is not pressed and held the scoreboard will shut off when the external power supply is unplugged. 4

7 Charging the Internal Battery Pack The main power source for your scoring system is an internal high-capacity NiMH battery pack. Proper recharge intervals and system storage ensure long, trouble-free battery life. Turn off the scoreboard before charging in order to properly charge the battery pack. Unless using an external power source, it is recommended that the scoreboard remain off during the entire charge cycle. Typical charge time is approximately 8 hours Plug round connector from smart charger firmly into the charging port on the left side of the scoreboard display. The connector has a groove that must be at a 1 o clock orientation to be plugged in correctly. Plug smart charger into a standard 110VAC wall outlet. Use an extension cord if necessary. Switch on charger must be set at 1.8A. LED indicator on smart charger is red while charging the battery pack. When the charge cycle is complete the LED will turn green. When charging is complete, unplug connector by pushing in on the charging port tab while pulling on the connector. Connector cannot be removed from port unless tab is pressed. Using External Power Source Your scoring system can also be powered from an approved external power source. Only sources purchased directly from Befour should be used; an AC adapter is available as an option. Using an external power source will not charge the internal battery pack. However, an external source can be used while the internal battery pack is charging. The display will turn on immediately when a source is plugged into the external power input port. 5

8 OPERATION INSTRUCTIONS Remote Control Edge Scoring Systems are remotely operated by using a wireless radio link. Typical range for transmission is approximately 300 feet (90 meters), although your performance may vary due to the location of the display and any obstacles in the path of the signal. The remote was designed to be weather-resistant and will not be harmed by a few raindrops. Do not allow the remote to get excessively wet. Avoid dropping, prolonged sunlight exposure and high humidity. A 9V alkaline battery (included) powers the remote control for three years. To avoid damage from battery leakage, remove the batteries if you anticipate the remote will not be used for an extended period. Button Overview Button START STOP HORN PERIOD HOME GUEST SET (MENU) CLEAR (POWER OFF) Description Press to start timer. Press again to stop timer. Press to sound horn. Press again to stop horn. Press to advance period indicator by one number. Press to adjust Home team score. Also used for setting timer and menu options. Press to adjust Guest team score. Also used for setting timer and menu options. Press to set timer. Press and hold to enter settings menu. Press to reset a display to zero. Press and hold to shut scoring system down. 6

9 Running the Timer The START/STOP button controls the timer on the display. If the timer is currently stopped (timer not counting), press START/STOP and the timer will begin counting. If currently running, press the button again and the timer will stop counting. Horn Operations Audible alerts can be made at any time using the HORN button. Press once to begin sounding horn. Press a second time to silence horn. Horn will sound for 35 seconds before shutting off automatically if HORN is not pressed a second time. At the end of a period when the timer expires, the horn will sound for a preset length of time. To silence the horn sooner, press HORN or START/STOP. Changing the Period The period can be set from 0-9 or turned off completely. Press the PERIOD button once to increase the displayed period by one number. To reset the period to zero without scrolling, press the CLEAR button and then the PERIOD button. The period digit will reset to zero. Once at zero, press CLEAR and then PERIOD a second time to turn off period display. Pressing PERIOD will turn display on again. Changing the Score Home and Guest scores can be changed using the respective score buttons. Press the up arrow to add one to a score, press the down arrow to subtract one from the score. To reset the either score to zero without scrolling, press the CLEAR button and then either up or down arrow. The score will reset to zero. For example, to reset the Home score to zero, press CLEAR and then press either the Home up or Home down arrow. The Home score display will then reset to zero. The score displays can be turned off if desired. Reset the score to zero as detailed above. Once at zero, repeat pressing CLEAR and then either up or down arrow to turn off display. Pressing the up or down arrow will turn display on again. 7

10 Setting the Timer The timer can be set to a value between 0:00-99:59. While the timer is not running, press the SET button once to activate set mode. The tens of minutes digit will flash first. Use the up and down score arrows (either Home or Guest) to change the tens of minutes digit. Press SET when complete, the ones of minutes digit will then flash. Repeat for the remaining timer digits; the timer will be set once all digits stop flashing. Press the CLEAR button to reset all timer digits to zero. Tenths (and hundredths) of seconds cannot be set by the user. When setting timer under one minute, the display will hide the tenths (and hundredths) of seconds display; tenths (and hundredths) of seconds will reappear once timer setting is complete and all digits stop flashing. Powering Down the Scoring System The scoring system can be shut off via the remote control at any time. Press and hold the POWER OFF button for a few seconds until all displays turn off and three beeps are audible. System is now off and can be powered on as described in the Connections & Controls section of this manual. Low Battery Indication When the internal battery pack has discharged and reaches a low voltage point where charging is necessary, the scoreboard display will flash batt twice every two minutes. It is recommended that you charge the battery pack immediately. The display has an automatic power-off that will occur if the battery pack voltage gets to a critical low level. Three beeps will sound to indicate the scoreboard has shut off. 8

11 ADVANCED OPERATIONS Settings Menu The settings menu allows customization of your scoring system. Such features as timer mode, display brightness, and horn duration can all be changed in the settings menu. Menu can only be accessed while timer is not running. Press and hold MENU button for a few seconds to enter settings menu. Set- will display across the top digits to indicate the scoreboard is in the menu. The letter A will appear on the Home display. Use the Home up and down arrows to change the menu letters. The Guest up and down arrows will change the setting displayed on the Guest score. The table below shows available menu settings. All settings are retained even after the scoreboard is powered down. Press SET to save the current setting into memory. The new setting will not take effect unless saved. Two beeps will notify the user of a successful save to memory. Press CLEAR to exit the settings menu and return to normal operation. Any unsaved settings will be lost. Menu Setting Description 00 Timer counts down (default). 01 Timer counts up in seconds. A B C D 0 Stopwatch counts up in tenths of seconds under one minute. 03 Stopwatch counts up in hundredths of seconds under one minute. 04 Circuit timer with practice intervals. 05 Time of day clock. 01 Level 1 lowest brightness level, longest battery life. 0 Level brightness (recommended for indoors). 03 Level 3 brightness 04 Level 4 brightness (default, recommended for outdoors). 05 Level 5 highest brightness level, shortest battery life. 00 Horn will not sound when time expires. 0x Horn will sound for x seconds (1-9) when time expires. 00 Key press beep notification disabled. 01 Key press beep notification enabled (default). E Duration (in seconds) of the practice interval. 9

12 Circuit Intervals (Practice Mode) Practice Mode Flowchart Enter practice mode through settings menu The Edge SS-5000 can run circuit intervals to aid in training and practice sessions. In practice mode the scoreboard will run repeated start and stop drills. A session time is set and started and the scoreboard will run continuously with no further user input. Enter practice mode by setting menu A to 04 as detailed in the table on page 9. Press SET to save this setting and press CLEAR to return to the main display. Set the timer to your desired session length. Press the START/STOP button to begin the practice session. Horn will sound when timer expires, then the timer will automatically reload for the next session. The practice interval, or time between sessions, is programmable by the user. Interval lengths from 0-99 seconds can be set using the E menu. Set timer (example 4:15) When the interval time expires, the horn will sound continuously for one second to indicate the start of another session. This process repeats until interrupted by the user. Circuit count is displayed on the Home score digits. Interval time remaining will display on the Guest score when appropriate. Press START/STOP button Press START/STOP while timer is running to pause practice session. Press START/STOP during interval to begin the next session immediately. Press PERIOD during interval to pause interval count down. Session begins Horn sounds as timer expires Continuous horn for one second Timer reloads (example 4:15) 10

13 Time of Day Clock Edge Scoring Systems have an integrated time of day clock that will retain accurate time even when the system is powered down. Display time of day clock by setting menu A to 05 as detailed in the table on page 9. Press SET to save this setting and then press CLEAR to view the time of day. Scoring and period displays can be used as normal while displaying the time of day clock. Setting the time of day clock Press the SET button and the hours will start flashing. Use either the Home or Guest up and down arrow keys to set the hours. Press SET to advance to setting the minutes. Use the up and down arrows again to set the minutes. Press SET again to save time setting. Press CLEAR at any time to stop setting time. 11

14 SPECIFICATIONS Dimensions Display W x H x D Weight Remote Control W x H x D Weight 8 x 0 x 3 0 lbs (9 kg) ¾ x 5 x 1 5 oz (140 grams) Power Requirements Internal Battery Pack Maximum Discharge Battery Life (approx.) Charge Time (approx.) External AC Adapter Remote Battery Remote Battery Life 1V NiMH 10,000mAh C/6, 5W 10 hours 8 hours 15VDC A 9V alkaline 3 years Operating Conditions Temperature Weather Resistance 10 F F (-1 C - 43 C) Splash & moisture resistant Digits Size Type Brightness Levels Visibility Range Viewing Angle 6 Time & Score, 5 Period Day-Bright LED ft (90 m) 70 H, 30 V RF Communication Frequency Remote Range FCC ID 900 MHz, FHSS 300 ft (90 m) OUR-9XCITE Construction Display Frame Display Window Remote Control Aircraft aluminum 3/16 Lexan ABS plastic 1