SUBMITTAL SHEETS FOR 5- PLY WOOD VENEER DOORS

Transcription

1 AMPCO ARCHITECTURAL - FLUSH WOOD DOOR SPECIFICATIONS SUBMITTAL SHEETS FOR 5- PLY WOOD DOORS Ampco Products, LLC NW 36th Avenue Miami, FL Voice: Fax: doors@ampco.com 1

2 Job Name: Submitted by: SUBMITTAL SHEETS FOR WOOD DOORS Contract/Job Number: Date: Sheet of Revisions: Date: By: Revisions: Date: By: Door Types (enter quantity required): PC Wood PC20 Wood 5 ply particle board core (AWl PC5) SLC Wood SLC20 Wood 5 ply staved lumber core (AWl SLC5) MC45 Wood 5 ply 45 minute mineral core fire door, C label (AWl FD 3/4) MC60 Wood 5 ply 60 minute mineral core fire door, B label (AWl FD 1) MC90 Wood 5 ply 90 minute mineral core fire door, B label (AWl FD 1 1/ 2) STC Wood Sound Attenuation Core (ASTM E-90-90) STC37-40MC45 Wood Sound Attenuation Mineral 45 min Fire Rated Core, C label LL Wood AF Wood 5 ply lead bonded to particle board core (AWl LL) AF20 Wood 5 ply Agrifiber core Stiles: Bonded to the core. Mill option hardwood or match to face veneer. End Rails: Bonded to the core. Mill option hardwood or structural composite lumber (SCL) Face Veneers (specify grade, cut and species): Glass Openings (specify size, location, moulding type and glass thickness): Louvers (specify size, location, louver type and if metal, specify moulding type and louver thickness): Prefit Clearances: Standard (For hinged doors: 1/8 top, 5/8 bottom, singles 1/4 width, pairs 3/ I6 width) Other (please specify): Edge Machining: Standard (For hinged doors: bevel both edges 1/8 in 2 ) Other (please specify): Packaging: Standard Other (please specify): 2

3 Quality Standards: Conforms to WDMA Industry Standard I.S.- 1A, and Architectural Woodwork Institute section 9 for type PC5, PC7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. PC/PC20 Wood Veneer PARTICLE BOARD CORE AWI: PC-5, PC-7 OR FD 1/3 AMPCO ARCHITECTURAL hardwood face veneer meeting AWI or WDMA grading 1/42 face veneer prior to sanding. Running, book match to be Maximum Size: Single Door: (Unrated) 4/0 x 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (Unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0 Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices. Thickness: 1 3/4 or 1 3/8 (±1/16 ) Stiles: (before trim or prefit) 1 1/4 mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 1 1/4 mill option kiln-dried hardwood or structural composite lumber (SCL). Bonded to the core. Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications. Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in. Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2 (±.015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications. Warranty: Lifetime from date of manufacture. For Label Authority: For FD 1/3, labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. Core: Wood particleboard door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed particleboard with density approx pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority. 3

4 Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for types SLC-5, SLC-7 or FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. SLC/SLC20 Wood Veneer STAVE LUMBER CORE AWI: SLC-5, SLC-7 or OR FD 1/3 AMPCO ARCHITECTURAL Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame components are bonded and uniformly sanded to a thickness of 1 1/2 (±.015). For FD 1/3, core and frame components ore assembled to meet or exceed 20 minute specifications. Maximum Size: (Neutral Pressure) Single Door: (unrated) 4/0 X 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0 Double egress: (20 minute) 8/0 X 9/0 with concealed vertical rod exit devices. Thickness: 1 3/4 (± 1/16 ) Stiles: (before trim or prefit) 1 1/4 mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 1 1/4 mill option kiln-dried hardwood. Bonded to the core. Interior Blocking: None required. Warranty: Lifetime from date of manufacture. For Label Authority: May be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. Application Exception: Exterior application of this product requires specification of Type I optional adhesives for construction of all door components including faces. This application also requires additional architectural accessories and special finishes (see Architectural Accessories Details Section V), and reduces the warranty period from lifetime to two years. Vision Panels: (20 minute) Maximum lite size for 20 minute fire rating, no more than 1296 sq in. Core: Staved lumber core with maximum 2 1/2 width low density wood blocks bonded together. Manufactured to WDMA I.S-1A sections C2 for Solid Wood Block Core. 4

5 Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 3/4, ASTM E-152 fire test of door assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: (unrated) 4/0 X 10/0, 4/0 X 10/0 with transom. Pairs: 8/0 X 9/0 Double egress: 8/0 X 8/0 Metal edge and astragal required for all pairs. Thickness: 1 3/4 (± 1/16 ) Stiles: (before trim or prefit) 1 1/4 mill option hardwood untreated or clear fir with a minimum density of pounds per cubic feet (pcf) or other species having equal density. Bonded to the core. Rails: (before trim or prefit) Top: 1 1/4 untreated hardwood or clear fir with a minimum of pd or other species having an equal density. Bonded to the core. Bottom: 1 1/4 hardwood with minimum of pd or other species having an equal density. Bonded to the core. MC45 Wood Veneer C LABEL 45 MINUTE FIRE DOOR AWI: FD 3/4 Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face Veneer. Core and frame components are bonded per Warnock Hersey manufacturing authorities and sanded to uniform thickness of 1 1/2 (±.015). Warranty: Lifetime from date of manufacture. For Label Authority: Labeled and classified by Warnock Hersey International as a 45 minute fire barrier in sizes as described above with vision panels having aggregate areas of 1296 square inches either singularly or in multiples. Interior Blocking: In some applications the addition of optional GP Firestop composition may be required due to fire rating and hardware specifications. Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 pounds per cubic foot. Faces: 1/8-2 ply or 3 ply hot pressed, cross banded 5

6 Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A, and Architectural Woodwork Institute section 9 for Type FD 1, ASTM E-152 fire test of door assemblies as performed by Warnock Hersey International. MC60 Wood Veneer B LABEL 60 MINUTE FIRE DOOR AWI: FD 1 Maximum Size: Single Door: (unrated) 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom. Must be pre installed with transom bar of rabbet joint not used.) Pairs: 8/0 x 9/0 Double egress: 8/0 x 8/0. Double egress is larger with intumescent material. Metal edge and astragal required for all pairs. Thickness: 1 3/4 (± 1/16 ) Stiles: (before trim or prefit) 15/16 Georgia Pacific firestop composition laminated to 3/ 8 hardwood. Bonded to the core. Rails: (before trim or prefit) Top: 1 Georgia Pacific firestop composition. Bonded to core. Bottom: 1 1/2 Georgia Pacific firesfop composition. Bonded to core. Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2 (+.015 ). Warranty: Lifetime from date of manufacture. For Label Authority: Labeled and classified by Warnock Hersey International as a 60 minute fire barrier in sizes as described above. Interior Blocking: In some applications, the addition of optional solid Georgia Pacific firestop composition may be required due to fire rating and hardware specifications. Contains no asbestos. Vision Panels: Maximum Lite size for 60 minute fire rating sq in. Core: Georgia Pacific gypsum type mineral substance with minimum density of 26 pounds per cubic foot. 6

7 Quality Standards: Conforms to WDMA Industry Standard 1.S.-1A and Architectural Woodwork Institute section 9 for type FD 1 1/2, and ASTM E-152, Fire Test of Door Assemblies as performed by Wornock Hersey International. MC90 Wood Veneer B LABEL 90 MINUTE FIRE DOOR AWI: FD 1 1/2 Maximum Size: Single Door: 4/0 x 10/0, 3/0 x 10/0 with transom (3/0 x 3/0 maximum transom). Must be installed.with steel frame transom bar. Pairs: 8/0 x 9/0. Metal edge and astragal required for all pairs. Double egress: 8/0 x 8/0 with surface vertical rod exit device or concealed vertical rods. Thickness: 1 3/4 (± 1/16 ) Stiles: (before trim or prefit) 11/8 Georgia Pacific firestop composition laminated to 3/8 hardwood. Bonded to the core. Rails: (before trim or prefit) Top: 1 firestop composition. Bonded to core. Bottom: 1 1/2 Georgia Pacific firestop composition. Bonded to core. Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame component are bonded per Warnock Hersey manufacturing authorities and sanded to a uniform thickness of 1 1/2 (+.015 ). Warranty: Lifetime from date of manufacture. For Label Authority: Labeled and classified by Warnock Hersey International as a 90 minute fire barrier in sizes as described above with vision panels having aggregate areas of 100 square inches either singularly or in multiples, or fusible link louvers having aggregate areas of 576 square inches either singularly or in multiples. Interior Blocking: In some applications the addition of optional Firestop composition may be required due to fire rating and hardware specifications. Vision Panels: Maximum Lite size for 90 minute fire rating sq in. Core: Georgia Pacific homogenous gypsum type mineral substance with minimum density of 26 pounds per cubic foot. 7

8 Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium A grade wood veneer with minimum thickness 1/42 before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available. Sound ratings were achieved through testing in accordance with ASTM E Maximum Size: 4/0 x 8/0 single doors only Thickness: 1-3/4 (± 1/16 ) Stile: 1-1/4 SCL Top Rail: 1-1/4 SCL Bottom Rail: 5 Interior Blocking: As required. 5 bottom rail is standard SOUND ATTENUATION STC41 AND STC42 WOOD AMPCO ARCHITECTURAL Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2 (I.015 ) Door Features: Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8 in 2 Clearances: 1/8 top, 1/8 lock and hinge stiles. See NFPA , 2007 edition, for bottom clearances. Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer s templates and approved shop drawing. Warranty: One year from date of manufacture. For *Doors will be shipped complete with Ampco s gasket and drop seal system. Note: Please Refer to Sealing Requirements Document. Vision Panels: Not available. Flush doors only Core: Proprietary core (HDF outer ply) using no ureaformaldehyde. Seal System Perimeter Seal Stop Bottom Rail Door Bottom Threshold STC 41 STC 42 PEMKO S-88 Gasket (black) PEMKO S-88 Gasket (black) Zero 119W Spring Weatherstrip (bronze) Zero 119W Spring Weatherstrip (bronze) Zero 564A (Mill Aluminum) 8

9 Quality Standards: ANSI/WDMA I.S 1-A and AWI Section 9 Quality Standards. Doors shall be clad in WDMA premium A grade wood veneer with minimum thickness 1/42 before sanding with Type 1 adhesive. Both domestic and exotic hardwood species available. SOUND ATTENUATION STC45 & STC46 WOOD Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2 (I.015 ) Door Features:Pairs and sets: Not Available (single flush only) Standard Bevel: 1/8 in 2 Sound ratings were achieved through testing in accordance with ASTM E Maximum Size: 4/0 x 8/0 single doors only Thickness: 1-3/4 (± 1/16 ) Stile: 1-1/4 SCL Top Rail: 1-1/4 SCL Bottom Rail: 5 Interior Blocking: As required. 5 bottom rail is standard Clearances: 1/8 top, 1/8 lock and hinge stiles. See NFPA , 2007 edition, for bottom clearances. Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer s templates and approved shop drawing. Warranty: One year from date of manufacture. For *Doors will be shipped complete with Ampco s gasket and drop seal system. Vision Panels: Not available. Flush doors only Core: Proprietary core (HDF outer ply) Seal System Perimeter Seal Stop Bottom Rail Door Bottom Threshold STC 45 STC 46 Zero 119W Spring Weatherstrip (bronze) Zero 119W Spring Weatherstrip (bronze) & Zero 475 Gasket (Anod. Aluminum) PEMKO S-88 Gasket (black) Zero 369A (Anod. Aluminum) Zero 369A (Anod. Aluminum) 9

10 Quality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Architectural Woodwork Institute section 9 for type FD 3/4, and ASTM E -152, Fire Test of Door Assemblies as performed by Warnock Hersey International. Maximum Size: 3/0 x 7/0 single doors only Thickness: 1-3/4 (± 1/16 ) Stile: 1 FSII Top Rail: 1-1/2 FSII Bottom Rail: 5 FSI (C LABEL 45 min door) Sound Attenuation Mineral Fire Rated Core STC37MC45,STC38MC45, STC39MC45, STC40MC45 Interior Blocking: As required. 5 FSI bottom rail is standard AMPCO ARCHITECTURAL Door Features: Pairs and sets: Not Available (single only) Standard Bevel: 1/8 in 2 Clearances: 1/8 top, 1/8 lock and hinge stiles. See NFPA , 2007 edition, for bottom clearances. Hardware preparation: All cutouts for mortise hardware shall be made at the factory from hardware manufacturer s templates and approved shop drawing. Warranty: One year from date of manufacture. For *Doors will be shipped complete with Ampco s gasket and drop seal system. Vision Panels: 100 sq. inches maximum visible area. Anemostat LoPro IS Vision Kit with 19mm (3/4 ) Pyrostop Glazing Core: Proprietary core (HDF outer ply) rules as specified. Type II bond between plys as specified. 1/42 face prior to sanding. Running, book match to be Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1-1/2 (I.015 ) Seal System Perimeter Seal Door Bottom Threshold STC37 MC45 Zero 475 Zero 369 STC38 MC45 2 rows of NGP 5050 NGP 321V NGP950S STC39 MC45 Zero 475 and 119WB Zero 369 STC40 MC45 Zero 475 and 119WB Zero

11 Quality Standards: Conforms to WDMA Industry Standard I.S.-1A, and Arch itectural Woodwork Institute section 9 for type PC5 PC7 or FD 1/ 3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: 4/0 x 8/0 Thickness: 1 3/4 (± 1/16 ) LL Wood Veneer LEAD LINED AWI: LL Warranty: Two years from date of manufacture. For Label Authority: Labeled and classified by Warnock Hersey International as a 20 minute fire /smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. Stiles: (before trim or prefit) 2 mill option kiln-dried hardwood or stiles to match face veneer species. Bonded to the core. Rails: (before trim or prefit) 2 mill optian kiln-dried hardwood. Bonded to the core. Interior Blocking: Not applicable. Vision Panels: Maximum lite size 20 minute, no more than 1296 sq in. Core: 1/16-1/4 thick lead sheet, full width of care, sandwiched and bonded to particleboard and securely fastened with lead bolts. Assembly: 5 ply or 7 ply when using 2 ply or 3 ply hardwood face veneer. Core and frame compartments are bonded and uniformly sanded to a thickness of 1 1/2 (±.015). Core and frame components are assembled to meet or exceed 20 minute specifications. 11

12 Quality Standards: Conforms to WDMA Industry Standard I.S. - 1A and Architectural Woodwork Institute section 9 for FD 1/3, and ASTM E-152, Fire Test of Door Assemblies as performed by Warnock Hersey International. Maximum Size: Single Door: (unrated) 4/0 x 10/0 Single Door: (20 minute) 4/0 X 10/0 Pairs: (unrated) 8/0 X 10/0 Pairs: (20 minute) 8/0 X 10/0, 8/0 X 9/0 or 8/0 X 8/0 Double Egress: 8/0 X 9/0 with concealed vertical rod exit devices. Thickness: 1 3/4 (±1/16 ) Stiles: (before trim or prefit) 1 1/4 structural composite lumber (SCL) or 1 1/4 mill option kiln-dried hardwood. Bonded to core. Rails: (before trim or prefit) top and bottom 1¼ structural composite lumber (SCL) or 1¼ mill option kiln-dried hardwood. Bonded to core. AF/AF20 AGRIFIBER CORE AWI: AF-3 OR FD 1/3 Assembly: Bonded core and frame assembly is uniformly sanded to a thickness of 1 1/2 (+.015 ). For FD 1/3, core and frame components are assembled to meet or exceed 20 minute specifications. Warranty: Lifetime from date of manufacture. For Label Authority: For FD 1/3, may be labeled and classified by Warnock Hersey International as a 20 minute fire/smoke barrier. Restrictions on machining and architectural accessories or application are per that authority. Interior Blocking: In some applications the addition of optional solid wood interior blocking may be required due to fire rating and hardware specifications. Core: Wood Agrifiber door core to meet or exceed American National Standard ANSI A208.1 for I-LD-2 Door Core. Mat-formed Agrifiber with density approx pounds per cubic feet (pcf) to meet or exceed Commercial Standard CS for Type 1 grade C, Class 1. Exceeds requirements for 20 minute construction authority. 12