Which loading unit? Biomass heating system with storagetanks

Transcription

1 Biomass Heating Biomass heating systems are becoming increasingly popular. Make sure to optimize the energy efficiency in your eco friendly system with our highstandard products.

2 Which loading unit? Biomass heating system with storagetanks

3 Which loading unit? Intelligent control. LK 130 SmartComfort is an electronic, weather compensated, indoor temperature controller for hydronic radiator and underfloor heating systems. By measuring the supply, outdoor and indoor temperatures LK 130 SmartComfort regulates the mixing valve to provide the system with the exact amount of heat required in the building at any given time.

4 Which loading unit? Increase enegy efficiency with clever functions like eco-mode. LK 160 SmartBio is an electronic differential temperature controller with several preset hydraulic systems for energy efficiency in heating systems with storage tanks. 7 different hydraulic systems make it suitable for many kind of systems.

5 Which loading unit? Quality that lasts. LK 548 AquaKit is a valve combination for water heating consisting of a shutoff/check valve and a thermostatic mixing valve.

6 Which loading unit? Intergrated circulation pump from Grundfos ErP ready. LK 810 ThermoMat 2.0 is a loading unit for heating applications with solid fuel boilers and storage tanks. The loading unit is intended to ensure a high return temperature as well as an optimal temperature stratification in the storage tank, thus increasing the efficiency of the system. Tarring and condensation are prevented which prolongs boiler life.

7 Biomass heating system with storagetank and solarthermal

8 Everything included. LK 202 SmartSolar is a compact dual-pipe solar pump unit. It contains all the necessary components for a safe operation and control of the solar heating system such as safety group, circulating pump, ball valve with integrated check valve and thermometer, air separator with manual air vent connection, flow meter with shut-off, filling and drainage valves as well as the electronic differential temperature controller LK 150 SmartSol with three sensors.

9 Strong! LK 816 ThermoKit E Eco is a loading unit for heating applications with solid fuel boilers and storage tanks. ThermoKit has a boiler efficiency of kw at 20 C ΔT, which makes it perfect for large heating systems.

10 Never has operation been easier LK 525 MultiZone is a motorized 3-way zone valve for On/Off control. The zone valve is - designed with a turning slide which allows it to withstand a larger pressure difference and reduces the risk of it stalling after a long intermission. This makes it especially suited for heat pump applications.

11 Leaks? Never again! LK 822 ThermoBac is a 3-way check valve with low opening pressure and high fluid capacity. The valve is especially suitable for heating systems with storage tanks. The check valve prevents self-circulation from storage tank to boiler after the fire has gone out. In case of power failure or pump breakdown LK 822 ThermoBac automatically opens for self-circulation.

12 Biomass heating system with storagetank and Under Floor Heating

13 Floor Heating affordable luxury! LK 430 Manifold RF Is a manifold for 2-12 underfloor heating circuits. It is equipped with filling / drainage valves. The upper manifold marked FLOW is fitted with flow indicators and adjustment valves for setting the respective circuit flows. The lower manifold marked RETURN has manually operated valves for shutting off each respective circuit.

14 Floor heating for everybody LK 435 OptiFlow is a group valve for flow adjustment of hydraulic systems such as underfloor heating, traditional heating and cooling systems. Adjustments are easily made using an Allen key. No measuring equipment is needed. The flow rate is read off directly from the visual flow indicator. The flow meter continuously measures and displays the actual flow rate during operation.

15 Small, but efficient LK 420 Minishunt is a thermostat controlled unit for connection of small underfloor heating systems to an existing heating system. The shunt unit consists of a circulating pump, a maximum limiter function for the supply temperature, a return valve and a thermostat valve unit, fitted with a room thermostat and room temperature sensor, connected to a capillary pipe.

16 Biomass heating Renewable energy Quality components ensure optimal efficiency in the system - save energy and money. Intelligent control according to the customers needs.

17 Biomass heating Renewable energy Quality components ensure optimal efficiency in the system - save energy and money. Intelligent control according to the customers needs. For more information, go to