Programmed with Eaton Pro-FX Control Software 32-bit Processor, 4.3 WVQA Sunlight Viewable Display

Transcription

1 VFX41m Electronic Programmable Display (Part Number: 102EC30401A) Programmed with Eaton Pro-FX Control Software 32-bit Processor, 4.3 WVQA Sunlight Viewable Display The high performance VFX41m display is designed to provide an operator interface for HMI can accept up to 2 video inputs, features a powerful processor, bright sunlight viewable needs of a variety of demanding applications. Technical Data Dimensions Weight Case Material Storage Temperature Range Operating Temperature Range IP Rating - Front IP Rating - Back 7.69" x 4.00" x 2.34".44 kg ABS/Polycarbonate blend cases -40 C to +85 C -40 C to +85 C IP66, IP67 IP66, IP67 Power Supply Supply Voltage Peak Supply Voltage Max Power Consumption Max Sleep Current Ignition Pin (K15) 6-32 VDC 32 VDC 10 W 400 ma

2 Technical Data CPU CPU Frequency Bit Width Operating System Freescale i.mx MHz 32 bits Linux Memory RAM Data Memory (RAM retain) Flash (ROM program & data combined) 128 MB DDR2 1 MB 256 MB (cannot be used to store captures on models with video inputs) Standards Vibration 7.86 G RMS ( Hz) SAE J1455 Section Shock 50g - SAE J1455 Section Radiated Immunity SAE J (150 V/m), SAE J (15 kv/m), EN (10 V/m) Radiated Emission SAE J (Class 4), EN , EN60945, EN Conducted Immunity SAE J (3.0 Vp-p), SAE J (200 ma), SAE J (Level 4), SAE J (Level 4), EN , EN , EN60945 Sec 10.3 (3 V/10 V RMS), EN (10 V RMS) Certifications CE Mark Graphical Interface Display Bonded, color transmissive TFT LCD; LCD Size 4.3 Resolution 480 x 272, WQVGA Color Format Supported 16-bit color Aspect Ratio 16:9 Orientation Landscape Display Backlight LED, cd/m2 (30,000 hr lifetime) Sunlight Viewability Direct sunlight Video Interface (Optional feature- not included on all models) Video 2 NTSC/PAL Boot-up Boot-up Screen Boot (first powered-on): Wake (display backlights set to zero): Customizable TYP. ~ 9 sec. to logo, 17 sec. to first screen TYP. ~1 sec. 2 EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October 2016

3 Technical Data Communications CAN Interface 1 CAN Specification 2.0A, 2.0B Baud Rates Configurable 125 kb/s, 250 kb/s, 500 kb/s, 1 Mb/s Protocols J1939 and CANopen master CAN Interface 2 CAN Specification 2.0A, 2.0B Baud Rates Configurable 125 kb/s, 250 kb/s, 500 kb/s, 1 Mb/s Protocols J1939 and CANopen master USB Interface USB Specification USB 2.0 (Note: 3.0 devices are compatible), used for programming Baud Rate Supports USB full speed at 6 Mbit/s Note: USB interface is not protected against battery level faults. Real Time Clock Estimated Battery Life Rechargeable Minimum 300 day time/date retention between charges Yes, Li-Ion (non-replaceable) Keypads Number of Buttons 8 Button Style Tactile feedback Button Backlight Yes Input Resolution Accuracy Measuring Ranges Scan Rate Digital Input (must be switched to ground) Input Impedance Switch-on Level Switch-off Level Voltage Input - 0-5V Input Impedance Current Input ma Input Impedance Resistive (0-5V) Pull-up Resistance 10 bits +/- 1% FS Digital, 0-5 V, 4-20 ma, Resistive 10 Hz (100 ms) High Side in 100 kohm 4.01 V 1.04 V 10 kohm 200 Ohm 400 Ohm EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October

4 Technical Data Outputs Digital Output 500 ma Amperage Diagnostics Low Side 500 ma Max Open/Short circuit protection Connections Connector 4 x 6 pin Manufacturer Model Contact Surface Deutsch DT04-6P Nickel plated 4 EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October 2016

5 Block Diagram VFX41m Screen: 4.3 Bonded, Color Transmissive TFT LCD 8 Tactile Feedback Buttons Processor: Freescale i.mx357, 32 bits, 532 MHz Memory: RAM -128 Mbytes, Flash Mbytes 1B 5B VBATT+ IGN Display Power VBATT- 6B 1A 2A 3A 4A 5A 6A 2B 3B 2C 3C 4C 5C USB_+5V USB_D+ USB_D- USB_1D USB_Shield USB_GND CAN1_H CAN1_L CAN2_H CAN2_L AnalogIn1 AnalogIn1_GND Programming Interface CAN Bus (J1939/CANopen) Analogs Input (0-5V, 4-20mA, Resistive) Not Connected Video (Pins only connected on video version) Digital Output (Digital Low Side) NC NC Video1_Input Video1_GND Video2_Input Video2_GND DigitalOut1 4D 3D 6D 1D 5D 2D 4B Note: B & G pin designations indicate black and gray connector locations EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October

6 Connector Pins Plug A Deutsch Pin Function 1 USB 5V 2 USB D+ 3 USB D- 4 USB 1D 5 USB Shield 6 USB Ground Plug B Deutsch Pin Function 1 Battery 2 CAN1 H 3 CAN1 L 4 Open-Drain Battery Output 5 Ignition Input 6 Ground Plug C Deutsch Pin Function 1 Not Connected 2 CAN2 H 3 CAN2 L 4 Analog Input Ground 5 Analog Input 6 Not Connected Plug D Deutsch Pin Function 1 Video Ground 1* 2 Video Ground 2* 3 Not Connected 4 Not Connected 5 Video Input 2* 6 Video Input 1* * Not connected on VFX40m 6 EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October 2016

7 Mounting (39.25).805 (20.44) (102.40) (195.40) 4X.170 (4.32) (41.90).787 (20.00) (83.80) 8-32 X.25 DEEP BRASS INSERTS 8-PLACES (49.00) (162.00) (175.64) EATON VFX41m Electronic Programmable Display Datasheet E-ELDI-TT003-E1 October

8 Cut-outs

9 Cut-outs

10 Eaton Hydraulics Group USA Lone Oak Road Eden Prairie, MN USA Tel: Fax: Eaton Hydraulics Group Europe Route de la Longeraie Morges Switzerland Tel: +41 (0) Fax: +41 (0) Eaton Eaton Building No.7 Lane 280 Linhong Road Changning District, Shanghai China Tel: (+86 21) Fax: (+86 21) Eaton All Rights Reserved Printed in USA Document No. October 2016