CAM LOCKS Expertise at your service

Transcription

1 LOY CM LOCKS Expertise at your service The unique LOY cylinder construction offers reliable operation and ease of use in the most demanding applications.

2 LOY EXPERTISE T YOUR SERVICE LOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive range consists of both standard products and a wide selection of customised products. The superior benefits offered by LOY cam locks make them ideally suited to the most demanding, high security applications where valuables are located either behind small doors or in enclosers, e.g. vending machines, cash dispensers, gaming machines, parking meters, pay phones, coin-operated laundry machines etc. Our long experience in high security products and our high levels of expertise guarantee you the best possible choice for your particular application. 2

3 HIGH-SECURITY PERFECTION The unique LOY cylinder construction, patented cylinders, strict key control and extensive masterkeying capabilities make LOY cam locks ideally suited for the most demanding applications. Unique construction ased on a unique operating principle which employs rotating detainer discs, LOY cam locks offer advantages that other locking systems cannot achieve. Masterkeying capabilities The several million different key combinations available mean that the LOY cylinder offers extensive master keying possibilities. ll LOY cylinder products can be made to operate with just a single key. User-friendly The disc control system and symmetrical key make LOY cam locks easy to operate. Resistance to harsh conditions The LOY cylinder contains no springs or pins which could cause it to malfunction in a wide range of environmental conditions. ll the components are hightly resistant to wear, dirt, moisture, corrosion or freezing conditions. Physical strength LOY cam locks combine excellence in design with the very latest engineering and production technology. dditional resistance to physical attacks is ensured by the use of case-hardened steel components. Virtually pickproof Only the correct key can align the gates on all the discs and permit the locking bar to disengage the cylinder from the housing. The LOY PROTEC cylinder employs a new, patented disc blocking system (DS) which makes it impossible to manipulate the cylinder so that it opens without the correct key. PTENTED CYLINDER TECHNOLOGIES These patented LOY cylinders feature symmetrical keys anbd disc steering system that provides smooth, reliable operation. oth LOY EXEC and LOY PROTEC have specialized features which make them ideally suited for particular applications. KEY SECURITY To guarantee maximum customer security LOY cylinder system offers a variety of key profiles and patented key security levels with a factory-controlled key service. Customer level Exclusive keyways for applications where the highest level of key security is required. LOY EXEC Nickel-silver key with heavyduty polymer key dow Patented key, key blank and cylinder construction Particularly suitable for industrial locking systems Exceptional picking and environmrntal resistance LOY PROTEC ll metal key Patented key, key blank and cylinder construction Disc blocking system (DS) Can be masterkeyed with doorlock cylinders Extensive range of LOY industrial locks available Factory level The supply of keys is controlled by either the LOY factory or an LOY sales office uthorised LOY dealer level Keys are supplied by an LOY authorised security centre under contract. 3

4 CUSTOMISED PERFECTION Decades of experience in creating locking solutions for the most demanding applications has given us a clear understanding of the need for customisation in design, operation and levels of security. Working in close co-operation with our customers, we are dedicated to the search for no-compromise solutions which are a perfect match for your application. Your operational environment and functional requirements form the basis for a design process which ensures that the solutions developed will be easy to use and add significant value to your equipment. ll LOY locks are designed and produced using the latest manufacturing technology, guaranteeing high quality, rapid response and reliable delivery. 4

5 PROTECTION IN EVERY FIELD The extensive range of LOY cam locks includes locks in a variety of sizes, which feature different modes of operation, making them ideally suited to a wide range of applications. We offer cam locks to fit almost any size, thickness or type of metal or wooden doors in universal and US dimensional specifications. WORLDWIDE REFERENCES The most demanding security institutions and industries have trusted LOY locks since 107. Thousands of manufacturers in numerous countries have chosen LOY locks to secure their high-quality products, such as vending machines parking meters safe deposits gaming machines museum showcases mobile phone base stations transport containers switch cabinets rifles pay phones 5

6 THE RIGHT PRODUCT FOR EVERY PPLICTION Model Dimensions Product numbers Cam turns: key removable 0 /180 In locked position only 360 In locked and unlocked pos. Material of cylinder housing Number of discs Left hand operation possible Cylinder type * ) C, P E D N CL100 (3275C) M1x1 CL101 (3276C) CL103 (3277C, 3507D) M1x1 CL106 (3278C) UNIVERSL RNGE M1x (CL108), 2 (CL10) CL104 (3273C, 3504D) CL105 (3243C, 3505D) CL107 (3274C) steel CL108 7 M1x1 CL (CL108) (CL10) Max Ø 35 CL0 steel CL200 (3373C, 3506D) M1x1 CL201 (3503D) steel CL202 (3377C) M1x1 US RNGE M1x1 CL203 (3375C) 36.3 (CL204), 34.5 (CL205) 6 UL LISTED M1x (CL204) (CL205) = UL listed products CL204 CL205 (3343C) = Patented cylinder systems * ) C= LOY CLSSIC P= LOY PROFILE steel steel D= LOY DISKLOCK PRO E= LOY EXEC N= LOY PROTEC

7 LOY KEY OPERTED SWITCH LOCKS EP400, EP401, EP402 Dimensions LOY switch locks provide key-actuated switching for burglar alarms, control boxes and other high security applications M1x The locks are available in three different models: EP400: key removable in on and off positions EP401: key removable in off position EP402: momentary-contact key removable in off position Locks can be fitted on panels from 0.5 mm to 22 mm thick. Circuit diagram C NO NC Microswitch: Electrical specifications: Honeywell 1SX1-H58 for contacting with MP inch (1.47 mm) reseptables 7, 250 VC 7 res., 28 VDC 4 ind., 28 VDC C NO NC Operational range: -54º to +120 ºC Cylinder types: C, P, E, D, N C = common NO = normally open NC = normally closed Material and finish: Cylinder housing: First and last disc: Hex nut: Coupling piece and switch mounting plug: Other parts: case-hardened chrome-plated steel case-hardened nickel-plated steel zinc-plated steel molded plastic LOY T-HNDLE LOCKS CL20, CL21 Dimensions CL Ø17.8 Ø6.2 LOY T-handle locks are ideal for vending machines and other locking handle applications. Steel bolt provides maximum resistance against attack by pulling The locks are available in two different models: CL20: spring-loaded latch CL21: deadlocking latch 5.5 CL Ø17.8 Cylinder types: C, P, E, D, N Material and finish: Cylinder housing: Cylinder face: Latch: chrome-plated steel case-hardened chrome-plated steel nickel-plated steel R4 3.1 R

8 LOY CM LOCKS IN DETIL CM TURNS UNIVERSL ND US SPECIFICTIONS 16 Locked position Locked position Universal specification 22 7 x 7 0 Open position M8 x 0.75 Cylinder face Cylinder end 180 Open position LOCK TYPES CL100 CL103 CL104 CL105 CL108 CL10 CL0 CL200 CL201 CL202 CL203 CL204 CL205 Open position LOCK TYPES CL101 CL106 CL107 US specification 22 Cylinder face Cylinder end /32-28 UNS-2 CONSTRUCTION ND FINISH rass cylinder (two vertical marks on cylinder face) Steel cylinder (two horizontal marks on cylinder face) Detainer discs, cylinder drum and end nut: rass Cam, governer, nut lock washer and hex nut: Zinc-plated steel Cylinder housing: Chrome-plated Detainer discs, cylinder drum and end nut: rass Cam, governer, nut lock washer and hex nut: Zinc-plated steel Cylinder housing: Case-hardened, chrome-plated steel First disc: Nickel-plated, case-hardened steel DIMENSIONS OF FITTING HOLE WHEN ORDERING, PLESE SPECIFY Lock type Cylinder type C = LOY CLSSIC P = LOY PROFILE D = LOY DISKLOCK PRO E = LOY EXEC N = LOY PROTEC Number of keys in LOY EXEC and LOY DISKLOCK PRO (to be ordered separately). In other cylinder types 2 keys/lock included. Key profile Finish of the cylinder housing, if not standard (chrome) M = H = satin chrome Cam type, if required (see page ) Cam turn (0 o, 180 o ) Fitting plate, if required 8

9 LOY CM LOCK CCESSORIES CMS For cam locks in the universal range, three different cam models available: straight, hooked and offset. Cams are made of nickel-plated steel. Cams for the US range of cam locks are available in the US sales office. Straight cam Part No. Offset cam Part No. C 16 Hooked cam Part No C C 3 FITTING PLTES Fitting plates are made of steel and should be ordered separately C 5 7x7 7x7 7x For use with plastic ring in glass doors. vailable also with finish, product number Chrome-plated Used inside of a wooden door to prevent the lock from rotating Fixed by screws through the upper holes of the plate Zinc-plated Used mostly as replacement for cam locks of universal specifications Normally used on both sides of the mounting hole Zinc-plated SPECIL CCESSORIES Ø Fitting plate Protective collar Lifting sleeve

10 LOY the sign for security The quality and environmental systems used by bloy Oy guarantee that customers can be certain of LOY quality in every field. We received our first Quality System Certificate - SFS-EN ISO in 18. Just eight years later, bloy Oy was one of the first companies in Finland to be granted an SFS-EN-ISO Environmental System Certificate. Our products are designed and manufactured not only to provide high levels of security, but also to be reliable, user-friendly and aesthetically pleasing. LOY is your sign for security. LOY is a registered trademark of bloy Oy, one of the leading manufacturers of locks, locking systems and architectural hardware and the world's leading developer of products in the field of electromechanical lock technology. The unique LOY detainer disc cylinder mechanism has several advantages over conventional locking mechanisms. Ever since its invention in 107, it has been a symbol of high security and superior performance. Our range consists of electromechanical locks, cam locks, padlocks, office furniture locks, rim locks, lock cases, cylinders for different types of mortice locks, door closers, door automatics and architectural hardware. LOY locking solutions for every application are available from our world-wide network of distributors. Customer-oriented development, combined with our long experience and extensive security expertise, mean that LOY security solutions employ the very latest technology to meet your needs. bloy Oy Wahlforssinkatu 20 P.O. ox 108 FI JOENSUU FINLND Tel Fax ISO 001 ISO CERTIFIED ORGNISTION / kpl, Suomen Painotuote, Joensuu

11 c c e s s o r i e s Cams L E G E N D Overall Dimension (inches / mm) Center of Cam to top of Cam (inches / mm)

12 dams Rite MS.870 / / Yale Standard / / Marks / / Russwin Cloverleaf / / Falcon / / Corbin Russwin / / Corbin Russwin / Schlage 070 exterior cam only / / Russwin / Segal / / Sargent / Yale / / Sargent Standard 1.00 / / Schlage ME.13 / / dams Rite / / 15.6

13 dams Rite / Lori.850 / / Schlage / / Schlage L 456/57/ / / EST 1.06 / / Corbin / Emhart ML / / Sargent 8204, 05, 06, / / Schlage L 456/57/6.36 / / older version 080 use with bloy CY402, 403, 415, 416, 5476, interior use only Schlage L 050/60/70/71 newer version.66 / / interior and exterior The above list is based on the information we have at time of printing, please check cam requirements and the dimensions before ordering, also check in the lock case for which it is to be used since many manufacturers dimensions and tolerances will change.