StainleSS Steel CHAPTER2. Stainless Steel

Transcription

1 Industrial Automation Supply - Tel: CHAPTER Stainless Steel 130 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

2 Industrial Automation Supply - Tel: CHAPTER COntentS HINGE-COVER Continuous-Hinge with Clamps, Type 4X Continuous Hinge with Clamps, EMC, Type 4X CLAMP-COVER Clamp Cover, Type 4X FLUSH-MOUNT ENCLOSURES PHARMAPRO, Type 4X Mounting System INLINE INSTRUMENTATION ENCLOSURES INLINE, Type 4X...14 INLINE LANDSCAPE INSTRUMENTATION ENCLOSURES AND ACCESSORIES INLINE Landscape, Type 4X Optional Components Selection Guide INLINE Landscape Panels CONSOLETS Consolets, Type PUSHBUTTON ENCLOSURES Extra-Deep 30.5-mm Pushbutton Enclosures, Type 4X Extra-Deep.5-mm Pushbutton Enclosures, Type 4X mm and.5-mm Pushbutton Enclosures, Type 4X CONCEPT WALL-MOUNT ENCLOSURES CONCEPT, Type 4X CONCEPT with Additional Quarter-Turn Latches, Type 4X CONCEPT Sloped Top, Type 4X...16 CONCEPT EMC, Type 4X WALL-MOUNT ENCLOSURES AND ACCESSORIES Continuous Hinge with 3-Point Latch, Type 4X Continuous Hinge with Clamps, Type 4X Continuous Hinge with Clamps, EMC, Type 4X...17 Continuous Hinge Two-Door with 3-Point Latch, Type 4X Continuous Hinge Two-Door with 3-Point Latch, Type Replacement Door with 3-Point Latch, Type 4X Painted White with 3-Point Latch, Type 4X WATERSHED WALL-MOUNT ENCLOSURES AND ACCESSORIES Hoffman WATERSHED, Type 4X...18 Mounting Bracket Kit Stand-Off Kit Padlocking Handle Kit Padlocking Latch Kit CONSOLES AND ACCESSORIES CONCEPT Console, Type 4X Caster Kit Side Panels FLOOR-MOUNT AND FREE-STAND ENCLOSURES Two-Door with 3-Point Latches, Type 4X Two-Door with Floor-Stands, Type 4X General Purpose Two-Door with Quarter-Turn Latches and Floor Stands, Type 4X 19 General Purpose Single-Door Free-Stand with Quarter-Turn Latches, Type 4X.194 Two-Door with 3-Point Latches and Floor-Stands, Type Free-Stand, Type 4X Free-Stand Single and Dual Access with 3-Point Latches, Type 4X...00 Free-Stand Accessories Selection Guide...06 Free-Stand, Type HOFFMAN WATERSHED FREE-STAND WATERSHED Free-Stand, Type 4X...16 Sanitary Leg Kits...17 Floor Stand Kit, Stainless Steel...18 PROLINE HMI ENCLOSURES PROLINE Stainless Steel HMI Enclosures....0 Sloped Front... Covers for Upper Front of PROLINE Sloped Fronts... Doors for Upper Front of PROLINE Sloped Fronts...3 Covers for Rear of PROLINE Sloped Fronts...3 Stainless Steel Pedestal...4 Doors for Rear of PROLINE Sloped Fronts...4 PROLINE Solid Rear Door Accessories...4 Stainless Steel Extension...5 Stainless Steel PROLINE -PC Package, Type Stainless Steel PROLINE -SY Package, Type EQUIPMENT PROTECTION PH FAX pentairprotect.com 131

3 Industrial Automation Supply - Tel: JUNCTION BOXES Junction Boxes Hinge-Cover HINGE-COVER COntinuOUS-HinGE WitH ClaMPS, TYPE 4X INDUSTRY StanDARDS UL 50, 50E Listed; Type 3R, 4, 4X, 1; File No. E7567 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E7567 UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 CSA File No. 4184: Type 4, 4X, 1 iec 6059, IP66 Meets NEMA Type 3RX requirements APPLICATION Used in either indoor or outdoor applications, these enclosures combine a rugged continuous hinge, seamless foam-in-place gasket and stainless steel screw-down clamps for a reliable seal that protects components from corrosive environments. SPECIFICatiONS 16 and 14 gauge Type 304 or 316L stainless steel Seams continuously welded and ground smooth Seamless foam-in-place gasket Stainless steel screws and clamps Pull stainless steel continuous hinge pin to remove door Weldnuts provided for mounting optional panels and terminal block kits Bonding provision on door and body FiniSH Cover and sides of body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Fast-Operating Clamp-Cover Junction Box Clamp Lock Kit for Clamp Cover Junction Boxes Panels for Junction Boxes Terminal Block Kit Assembly for Junction Boxes Overview MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A51S Standard Product Catalog Number AxBxC Stainless Steel Type UL Listed Body Gauge Cover Gauge Steel Panel Conductive Panel Panel Size D x E A6044CHNFSS 6.00 x 4.00 x A A6P4 A6P4G 4.88 x x 10 x x 73 A606CHNFSS 6.00 x 6.00 x , 50E A6P6 A6P6G 4.88 x x 15 x x 14 A8064CHNFSS 8.00 x 6.00 x , 50E A8P6 A8P6G 6.75 x x 15 x x 14 A1008CHNFSS x 8.00 x , 50E A10P8 A10P8G 8.75 x x 03 x 10 x 175 A1106CHNFSS 1.00 x x , 50E A1P10 A1P10G x x 54 x x 5 A11CHNFSS 1.00 x 1.00 x , 50E A1P1 A1P1G x x 305 x x A141CHNFSS x 1.00 x , 50E A14P1 A14P1G 1.75 x x 305 x x A1614CHNFSS x x A A16P14 A16P14G x x 356 x x 37 A6044CHNFSS x 4.00 x L 50, 50E A6P4 A6P4G 4.88 x x 10 x x 73 A606CHNFSS x 6.00 x L 50, 50E A6P6 A6P6G 4.88 x x 15 x x 14 A8064CHNFSS x 6.00 x L 50, 50E A8P6 A8P6G 6.75 x x 15 x x 14 A1008CHNFSS x 8.00 x L 50, 50E A10P8 A10P8G 8.75 x x 03 x 10 x 175 A1106CHNFSS x x L 50, 50E A1P10 A1P10G x x 54 x x 5 A11CHNFSS x 1.00 x L 50, 50E A1P1 A1P1G x x 305 x x A141CHNFSS x 1.00 x L 50, 50E A14P1 A14P1G 1.75 x x 305 x x A1614CHNFSS x x L 50, 50E A16P14 A16P14G x x 356 x x 37 A6044CHNFSS and A6044CHNFSS6 UL 508A Listed. The remaining catalog numbers are UL 50 Listed. Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. Mounting G x H 6.75 x x x x x 4.00 x x x x x x x x x x x x x x x x 4.00 x x x x x x x x x x x 305 Overall L x W 7.50 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 379 F J N T V Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

4 Industrial Automation Supply - Tel: Junction Boxes Hinge-Cover EQUIPMENT PROTECTION PH FAX pentairprotect.com 133

5 Industrial Automation Supply - Tel: Junction Boxes Hinge-Cover COntinuOUS HinGE WitH ClaMPS, EMC, TYPE 4X APPLICATION Use this enclosure in corrosive indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. SPECIFICatiONS 16 and 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth Seamless foam-in-place gasket adjacent to monel mesh assures water-tight, dust-tight and EMI seal Stainless steel screws and clamps removable door with continuous hinge Weldnuts provided for mounting optional panels and terminal kits Bonding provision on door INDUSTRY StanDARDS UL 50, 50E Listed; Type 4, 4X, 1; File No. E7567 cul Listed per CSA C. No 94; Type 4, 4X, 1; File No. E7567 UL 508A Listed; Type 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File No. E61997 NEMA/eemAC Type 4, 4X, 1, 13 CSA File No. 4184: Type 4, 4X, 1 iec 6059, IP66 FiniSH Cover and sides of body have a smooth #4 brushed finish. ACCESSORieS See also Accessories. Fast-Operating Clamp-Cover Junction Box Clamp Panels for Junction Boxes Terminal Block Kit Assembly for Junction Boxes Overview Steel and Stainless Steel Window Kits BULLETIN: A51SE Standard Product Catalog Number AxBxC UL Listed Body Gauge Cover Gauge Stainless Steel Panel Conductive Steel Panel Panel Size D x E A6044CHEMCSS 6.00 x 4.00 x A A6P4SS A6P4G 4.88 x x 10 x x 73 A606CHEMCSS 6.00 x 6.00 x , 50E A6P6SS A6P6G 4.88 x x 15 x x 14 A8064CHEMCSS 8.00 x 6.00 x , 50E A8P6SS A8P6G 6.75 x x 15 x x 14 A1008CHEMCSS x 8.00 x , 50E A10P8SS A10P8G 8.75 x x 03 x 10 x 175 A1106CHEMCSS 1.00 x x , 50E A1P10SS A1P10G x x 54 x x 5 A11CHEMCSS 1.00 x 1.00 x , 50E A1P1SS A1P1G x x 305 x x A141CHEMCSS x 1.00 x , 50E A14P1SS A14P1G 1.75 x x 305 x x A1614CHEMCSS x x x 356 x 15 Purchase panels separately. 50, 50E A16P14SS A16P14G x x 37 Mounting G x H 6.75 x x x x x 4.00 x x x x x x x x x x x 305 Overall L x W 7.50 x x x x x x x x x x x x x x x x 379 F J N T V Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

6 Industrial Automation Supply - Tel: Junction Boxes Hinge-Cover EQUIPMENT PROTECTION PH FAX pentairprotect.com 135

7 Industrial Automation Supply - Tel: Junction Boxes Clamp-Cover CLAMP-COVER ClaMP COVER, TYPE 4X INDUSTRY StanDARDS UL 50 Listed; Type 3R, 4, 4X, 1; File No. E755 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E755 UL 508A, 508 Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 CSA File No. 4184: Type 4, 4X, 1 iec 6059, IP66 Meets Type 3RX requirements APPliCatiON Used in either corrosive or outdoor applications, Clamp Cover Enclosures combine a seamless foam-in-place gasket with stainless steel screw-down clamps for a consistent and reliable seal, yet the cover is easily removed for access and modifications. SPECIFICatiONS 16 and 14 gauge Type 304 or 316L stainless steel Seams continuously welded and ground smooth Seamless foam-in-place gasket Stainless steel screws and clamps Weldnuts provided for mounting optional panels and terminal block kits in size 6.00 x 4.00 in. (15 x 10 mm) and larger Bonding provision on door and body FiniSH Cover and sides of body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Fast-Operating Clamp-Cover Junction Box Clamp Panels for Junction Boxes Terminal Block Kit Assembly for Junction Boxes Overview Steel and Stainless Steel Window Kits See also the Popular Accessories table following the Standard Products table. MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A51S Standard Product Catalog Number AxBxC UL Listed Body Gauge Cover Gauge Steel Panel Conductive Steel Panel Panel Size D x E A404NFSS 4.00 x 4.00 x 508A No Panel No Panel No Panel 10 x 10 x No Panel A404NFSS x 4.00 x 508A No Panel No Panel No Panel 10 x 10 x No Panel A6044NFSS 6.00 x 4.00 x A A6P4 A6P4G 4.88 x x 10 x x 73 A6044NFSS x 4.00 x A A6P4 A6P4G 4.88 x x 10 x x 73 A8064NFSS 8.00 x 6.00 x , 50E A8P6 A8P6G 6.75 x x 15 x x 14 A8064NFSS x 6.00 x , 50E A8P6 A8P6G 6.75 x x 15 x x 14 A606NFSS 6.00 x 6.00 x , 50E A6P6 A6P6G 4.88 x x 15 x x 14 A606NFSS x 6.00 x , 50E A6P6 A6P6G 4.88 x x 15 x x 14 A1008NFSS x 8.00 x , 50E A10P8 A10P8G 8.75 x x 03 x 10 x 175 A1008NFSS x 8.00 x , 50E A10P8 A10P8G 8.75 x x 03 x 10 x 175 A1106NFSS 1.00 x x , 50E A1P10 A1P10G x x 54 x x 5 A1106NFSS x x , 50E A1P10 A1P10G x x 54 x x 5 A141NFSS x 1.00 x , 50E A14P1 A14P1G 1.75 x x 305 x x A141NFSS x 1.00 x , 50E A14P1 A14P1G 1.75 x x 305 x x A1614NFSS x x , 50E A16P14 A16P14G x x 356 x x 37 A1614NFSS x x x 356 x 15 50, 50E A16P14 A16P14G x x 37 A404NFSS, A404NFSS6, A6044NFSS and A6044NFSS6 are UL 508A Listed. The remaining catalog numbers are UL 50 Listed. Catalog numbers ending in 6 are Type 316L stainless steel. Purchase panels separately. Optional stainless steel, composite and aluminum panels are also available for most sizes. Mounting G x H 4.75 x x x x x x x x x 4.00 x x 4.00 x x x x x x x x x x x x x x x x x x x x x 305 Overall L x W 5.50 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 391 F J M N T V Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

8 Industrial Automation Supply - Tel: Junction Boxes Clamp-Cover Popular Accessories Enclosure Width (b Dimension) Hole Seals 4 in. (10 mm) AS050SS 6 in. (15 mm) AS050SS 8 in. (03 mm) AS050SS 10 in. (54 mm) AS050SS 1 in. (305 mm) AS050SS 14 in. (356 mm) AS050SS EQUIPMENT PROTECTION PH FAX pentairprotect.com 137

9 Industrial Automation Supply - Tel: FluSH-Mount EnclOSures Flush-Mount Enclosures FLUSH-MOUNT ENCLOSURES FLUSH-MOUNT ENCLOSURES PHARMAPRO, TYPE 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 1, 13; File No. E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1, 13; File No. E61997 NEMA/eemAC Type 4, 4X, 1, 13 iec 6059, IP66 APPliCatiON PHArmAPro Enclosures are specifically designed for the pharmaceutical industry with flush mounting and a low RA value finish that minimizes surface crevices for thorough wipe-downs and eliminates areas where contaminants can accumulate. The mounting system pulls the enclosure flush and tight to the wall and can be used on block or stud walls. FEATURES Specifically designed for pharmaceutical industry flush mounting and flat surfaces eliminate areas where contaminants can accumulate Low RA value of PHArmAPro finish minimizes surface crevices, allowing for a thorough wipe-down enclosure does not protrude into the manufacturing area mounting system included SPECIFICATIONS enclosure body manufactured from 14 gauge Type 304 stainless steel mounting flange manufactured from 10 gauge Type 316L stainless steel Screw cover and hinged door manufactured from 1 gauge Type 316L stainless steel Seams continuously welded and ground smooth type 316L stainless steel lift-off hinges used with hinged door type 316L stainless steel slotted oval-head fasteners used with screw cover Stainless steel quarter-turn latches used with hinged door FDA-approved silicone gasket Grounding stud on body; bonding provision on cover or door FiniSH PHArmAPro low RA finish (typically 15-0 RA) applied to cover, door and mounting flange ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors concept Panels MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A0S 138 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

10 Industrial Automation Supply - Tel: FluSH-Mount EnclOSures Flush-Mount Enclosures Standard Product Hinged-Door Catalog Number AxBxC AFM0144SS 0.00 x x x 356 x 10 AFM004SS 0.00 x 0.00 x x 508 x 10 AFM116SS 1.00 x 1.00 x x 305 x 15 AFM1616SS x 1.00 x x 305 x 15 AFM0166SS 0.00 x x x 406 x 15 AFM006SS 0.00 x 0.00 x x 508 x 15 AFM406SS 4.00 x 0.00 x x 508 x 15 AFM448SS 4.00 x 4.00 x x 610 x 03 AFM3048SS x 4.00 x 8.00 x 610 x 03 AFM4010SS 4.00 x 0.00 x x 508 x 54 AFM30410SS x 4.00 x 1.00 x 610 x 5 Door Gauge Body Gauge Size of Mounting Cutout x x x x x x x 1 43 x x x x x x x x x x x x x x x 635 Latches Panel Qty. CP014 3 CP00 5 CP11 CP161 3 CP016 5 CP00 5 CP40 5 CP44 7 CP304 8 CP40 5 CP304 8 EQUIPMENT PROTECTION PH FAX pentairprotect.com 139

11 Industrial Automation Supply - Tel: FluSH-Mount EnclOSures Flush-Mount Enclosures Standard Product Screw-Cover Catalog Number AxBxC AFMSC014SS 0.00 x 1.00 x x 305 x 10 AFMSC004SS 0.00 x 0.00 x x 508 x 10 AFMSC116SS 1.00 x 1.00 x x 305 x 15 AFMSC1616SS x 1.00 x x 305 x 15 AFMSC0166SS 0.00 x x x 406 x 15 AFMSC006SS 0.00 x 0.00 x x 508 x 15 AFMSC406SS 4.00 x 0.00 x x 508 x 15 AFMSC448SS 4.00 x 4.00 x x 610 x 03 AFMSC3048SS x 4.00 x 8.00 x 610 x 03 AFMSC4010SS 4.00 x 0.00 x x 508 x 54 AFMSC30410SS x 4.00 x x 610 x 54 Door Gauge Body Gauge Size of Mounting Cutout x x x x x x x x x x x x x x x x x x x x x x 667 Panel CP01 CP00 CP11 CP161 CP016 CP00 CP40 CP44 CP304 CP40 C304 Latches Qty. NA NA NA NA NA NA NA NA NA NA NA 140 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

12 Industrial Automation Supply - Tel: FluSH-Mount EnclOSures Flush-Mount Enclosures MOUNTING SYSTEM Adjustable-depth mounting system is included with each enclosure. Mounting system can be used on either block or stud walls. EQUIPMENT PROTECTION PH FAX pentairprotect.com 141

13 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Instrumentation Enclosures INSTRUMENTATION ENCLOSURES AND ACCESSORIES INLINE INSTRUMENTATION ENCLOSURES INLINE, TYPE 4X SPECIFICATIONS 16 gauge covers and doors and 14 gauge bodies; Type 304 or 316L stainless steel Seams continuously welded and ground smooth external formed body flange trough Large perimeter body opening Fastening holes in back of body for direct mounting or optional external mounting brackets Seamless foam-in-place gasket m6 bonding provision on cover, M6 ground stud in body Furnished hardware kit includes panel mounting screws, grounding hardware and sealing washers for wall-mounting holes INDUSTRY StanDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 4, 4X, 1; File No. E61997 NEMA/eemAC Type 4, 4X, 1 CSA File No. 4186: Type 4, 4X, 1 iec 6059, IP66 APPliCatiON Aesthetic styling, flush latches and an attractive, stroked finish make INLine Enclosures an excellent choice when style and functionality are important. INLine Enclosures have an outward formed body flange to prevent contaminants from entering the enclosure and are available in three cover styles: hinged window door, hinged solid door and solid screw cover. inline Screw-Cover Enclosures captivated Type 316 stainless steel cover screws with sealing bushings made of a durable composite material integral compression stops maintain optimal gasket compression inline Hinged-Door Enclosures 180-degree door opening removable Type 316 stainless steel hinge pins Standard self-grounding, slotted, quarter-turn Type 316 stainless steel latch system with double seal inline Window-Door Enclosures 3/16-in. (4.8-mm) clear polycarbonate window is mounted flush with cover surface 180-degree door opening removable Type 316 stainless steel hinge pins Standard self-grounding, slotted, quarter-turn Type 316 stainless steel latch system with double seal FiniSH Cover and body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Din Rail or Panel Mounting Brackets Din3 Type Rails Key Inserts Mounting Bracket Kit INLine Panels Wing Knob Latch MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A54S 14 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

14 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Instrumentation Enclosures Standard Product Screw-Cover Catalog Number AxBxC LSC15151SS 5.91 x 5.91 x x 150 x 10 LSC15151SS x 5.91 x x 150 x 10 LSC0151SS 7.87 x 5.91 x x 150 x 10 LSC0151SS x 5.91 x x 150 x 10 LSC5015SS 9.84 x 7.87 x x 00 x 150 LSC5015SS x 7.87 x x 00 x 150 LSC30515SS x 9.84 x x 50 x 150 LSC30515SS x 9.84 x x 50 x 150 LSC35300SS x x x 300 x 00 LSC35300SS x x x 300 x 00 Purchase panels separately. Catalog numbers ending in 6 are Type 316L stainless steel. Stainless Steel Type Steel Panel Conductive Panel Panel Size D x E mm/in. 304 LP1515 LP1515G 131 x x L LP1515 LP1515G 131 x x LP015 LP015G 181 x x L LP015 LP015G 181 x x LP50 LP50G 31 x x L LP50 LP50G 31 x x LP305 LP305G 81 x x L LP305 LP305G 81 x x LP3530 LP3530G 331 x x L LP3530 LP3530G 331 x x Mounting G x H mm/in. 13 x x x x x x x x x x x x x x x x x x x x 9.7 F mm/in EQUIPMENT PROTECTION PH FAX pentairprotect.com 143

15 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Instrumentation Enclosures Standard Product Hinged-Cover Catalog Number AxBxC LHC15151SS 5.91 x 5.91 x x 150 x 10 LHC15151SS x 5.91 x x 150 x 10 LHC0151SS 7.87 x 5.91 x x 150 x 10 LHC0151SS x 5.91 x x 150 x 10 LHC5015SS 9.84 x 7.87 x x 00 x 150 LHC5015SS x 7.87 x x 00 x 150 LHC30515SS x 9.84 x x 50 x 150 LHC30515SS x 9.84 x x 50 x 150 LHC35300SS x x x 300 x 00 LHC35300SS x x x 300 x 00 Purchase panels separately. Catalog numbers ending in 6 are Type 316L stainless steel. Stainless Steel Type Steel Panel Conductive Panel Panel Size D x E 304 LP1515 LP1515G 5.16 x x L LP1515 LP1515G 5.16 x x LP015 LP015G 7.13 x x L LP015 LP015G 7.13 x x LP50 LP50G 9.09 x x L LP50 LP50G 9.09 x x LP305 LP305G x x L LP305 LP305G x x LP3530 LP3530G x x L LP3530 LP3530G x x 81 Mounting G x H mm/in. 13 x x x x x x x x x x x x x x x x x x x x 9.7 F SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

16 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Instrumentation Enclosures Standard Product Window-Door Catalog Number AxBxC LWC0151SS 7.87 x 5.91 x x 150 x 10 LWC0151SS x 5.91 x x 150 x 10 LWC5015SS 9.84 x 7.87 x x 00 x 150 LWC5015SS x 7.87 x x 00 x 150 LWC30515SS x 9.84 x x 50 x 150 LWC30515SS x 9.84 x x 50 x 150 LWC04015SS 7.87 x x x 400 x 150 LWC04015SS x x x 400 x 150 LWC06015SS 7.87 x 3.6 x x 600 x 150 LWC06015SS x 3.6 x x 600 x 150 Purchase panels separately. Catalog numbers ending in 6 are Type 316L stainless steel. Stainless Steel Type Steel Panel Conductive Panel Panel Size D x E 304 LP015 LP015G 7.13 x x L LP015 LP015G 7.13 x x LP50 LP50G 9.09 x x L LP50 LP50G 9.09 x x LP305 LP305G x x L LP305 LP305G x x LP040 LP040G 7.13 x x L LP040 LP040G 7.13 x x LP060 LP060G 7.13 x x L LP060 LP060G 7.13 x x 581 Mounting G x H mm/in. 18 x x x x x x x x x x x x x x x x x x x x 1.08 Window Size M x N 5.87 x x x x x x x x x x x x x x x x x x x x 549 F EQUIPMENT PROTECTION PH FAX pentairprotect.com 145

17 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Landscape Instrumentation Enclosures and Accessories INLINE LANDSCAPE INSTRUMENTATION ENCLOSURES AND ACCESSORIES INLINE LANDSCAPE, TYPE 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NEMA/eemAC Type 4, 4X, 1 CSA File Number 4186: Type 4, 4X, 1 iec 6059, IP66 APPliCatiON When applications require mounting electrical components the full width of the enclosure, the landscape orientation of this aesthetic inline Enclosure makes this possible. The full-width mounting brackets can be drilled anywhere along their length, providing maximum mounting flexibility. SPECIFICatiONS 14 gauge Type 304 stainless steel body; 16 gauge Type 304 stainless steel door Seams continuously welded and ground smooth external formed body flange trough Large perimeter body opening mounting brackets are spot-welded to top and bottom of enclosure mounting brackets have predrilled mounting holes; customerspecific location holes can be drilled for mounting flexibility Seamless foam-in-place gasket m6 ground stud with base flange on body; M6 bonding provision with base flange on door Furnished hardware kit includes panel mounting screws and grounding hardware Hinged door with removable hinge pins and self-grounding quarter-turn latch system with double seal Door opens 180 degrees Window door models include 3/16-in. (4.8-mm) clear polycarbonate window mounted flush with door surface FiniSH Type 304 stainless steel with #4 brushed finish. Back is not brushed. ACCESSORieS See also Accessories. Mounting Bracket Kit Lock Inserts Wing Knob Latch Grounding Kit Din3 Type Rail Din Rail or Panel-Mounting Brackets BULLETIN: A54S Standard Product Catalog Number AxBxC LHC33116SS 9.06 x 1.0 x x 310 x 155 LWC33116SS 9.06 x 1.0 x x 310 x 155 LHC34616SS 9.06 x x x 460 x 155 LWC34616SS 9.06 x x x 460 x 155 LHC36016SS 9.06 x 3.6 x x 600 x 155 LWC36016SS 9.06 x 3.6 x x 600 x 155 LHC37716SS 9.06 x x x 770 x 155 LWC37716SS 9.06 x x x 770 x 155 LHC39316SS 9.06 x x x 930 x 155 LWC39316SS 9.06 x x x 930 x 155 Enclosure B mm/in Window N mm/in Mtg. Holes H mm/in Mtg. Studs J mm/in Clear Space Above Panel mm/in SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

18 Industrial Automation Supply - Tel: Instrumentation Enclosures and AcceSSORies INLINE Landscape Instrumentation Enclosures and Accessories INLINE LANDSCAPE PANELS Panels are 1 gauge steel with a white polyester powder paint or conductive finish. They include a labeled ground hole sized for an M6 screw. Panels mount on studs provided in the enclosure or to optional DIN mounting brackets. BULLETIN: A54P Catalog Number Conductive Panel Panel Size D x E (mm) Panel Size D x E (in.) LP331 LP331G 11 x x LP346 LP346G 11 x x LP360 LP360G 11 x x.87 LP377 LP377G 11 x x 9.57 LP393 LP393G 11 x x OPtiONAL COMPONENTS SeleCtiON GUIDE Use the table to assist with selection of the optional components for the appropriate INLine enclosure. BULLETIN: A54S Catalog Number AxBxC in. AxBxC mm Solid or Window Cover Enclosure Panel Conductive DIN Rail DIN Rail or Panel Mounting Bracket LHC33116SS 9.06 x 1.0 x x 310 x 155 Solid Cover LP331 LP331G LDR3P31 LMK3 LWC33116SS 9.06 x 1.0 x x 310 x 155 Window Cover LP331 LP331G LDR3P31 LMK3 LHC34616SS 9.06 x x x 460 x 155 Solid Cover LP346 LP346G LDR3P46 LMK3 LWC34616SS 9.06 x x x 460 x 155 Window Cover LP346 LP346G LDR3P46 LMK3 LHC36016SS 9.06 x 3.6 x x 600 x 155 Solid Cover LP360 LP360G LDR3P60 LMK3 LWC36016SS 9.06 x 3.6 x x 600 x 155 Window Cover LP360 LP360G LDR3P60 LMK3 LHC37716SS 9.06 x x x 770 x 155 Solid Cover LP377 LP377G LDR3P77 LMK3 LWC37716SS 9.06 x x x 770 x 155 Window Cover LP377 LP377G LDR3P77 LMK3 LHC39316SS 9.06 x x x 930 x 155 Solid Cover LP393 LP393G LDR3P93 LMK3 LWC39316SS 9.06 x x x 930 x 155 Window Cover LP393 LP393G LDR3P93 LMK3 600-mm and longer enclosures require two sets of brackets for mounting panels. EQUIPMENT PROTECTION PH FAX pentairprotect.com 147

19 Industrial Automation Supply - Tel: ConSOlets Consolets CONSOLETS CONSOLETS CONSOLETS, TYPE 1 INDUSTRY StanDARDS UL 508A Listed; Type 1, 13; File Number E61997 cul Listed per CSA C. No 94; Type 1, 13; File Number E61997 NEMA/eemAC Type 1 CSA File Number 4186: Type 1 iec 6059, IP65 APPLICATION Consolets are ideal for mounting small control or instrumentation devices where the desirable access requires a 30- or 60-degree surface. These enclosures can be mounted on either of two sides for placement on desktops, pedestals or other flat surfaces. See the HMI chapter for related mild steel consolets. SPECIFICatiONS type 304 stainless steel Seams continuously welded and ground smooth captivated cover screws thread into sealed wells cover attached with continuous hinge oil-resistant gasket Bonding provision on door FiniSH Cover and sides of body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors Steel and Stainless Steel Window Kits MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: C5S Standard Product Catalog Number AxBxC C8C8SS 8.00 x 8.00 x x 03 x 180 C8C1SS 8.00 x 1.00 x x 305 x 180 C8C16SS 8.00 x x x 406 x 180 C8C0SS 8.00 x 0.00 x x 508 x 180 C1C1SS 1.00 x 1.00 x x 305 x 31 C1C16SS 1.00 x x x 406 x 31 C1C0SS 1.00 x 0.00 x x 508 x 31 C1C4SS 1.00 x 4.00 x x 610 x 31 C16C16SS x x x 406 x 8 C16C0SS x 0.00 x x 508 x 8 C16C4SS x 4.00 x x 610 x 8 C16C30SS x x x x 8 C16C36SS x x x 914 x 8 C0C0SS 0.00 x 0.00 x x 508 x 33 C0C4SS 0.00 x 4.00 x x 610 x 33 C0C30SS 0.00 x x x x 33 E H J K L N SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

20 Industrial Automation Supply - Tel: ConSOlets Consolets EQUIPMENT PROTECTION PH FAX pentairprotect.com 149

21 Industrial Automation Supply - Tel: PUSHBUTTON ENCLOSURES PUSHBUTTON ENCLOSURES PuSHButton Enclosures Pushbutton Enclosures EXTRA-DEEP 30.5-MM PUSHButtON ENCLOSURES, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NEMA/eemAC Type 4X, 1, 13 CSA File Number 4186: Type 4, 4X, 1 IEC 6059, IP66 APPLICATION Designed to house 30.5-mm oil-tight pushbuttons, switches and pilot lights. Enclosures provide protection against dirt, dust, oil and water. Extra-deep design accommodates additional contact blocks for pushbuttons. See Mild Steel chapter for related mild steel enclosures. SPECIFICatiONS 14 gauge bodies, 16 gauge covers; Type 304 or Type 316 stainless steel Seams continuously welded and ground smooth captivated cover screws thread into sealed wells Bonding provision on door; grounding nut on body 4-way pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights enclosures 6.00 x 4.00 x 4.75 in. (15 x 10 x 11 mm) and larger have internal detachable hinge to hold cover open during wiring, yet permit immediate removal oil-resistant gasket FiniSH Cover and sides of body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors HOL-SEALerS TM Hole Seals Tamper-Resistant Screws BULLETIN: PB1S Standard Product Catalog Number AxBxC E1PBXSS 4.00 x 4.00 x x 10 x 11 EPBXSS 6.00 x 4.00 x x 10 x 11 E3PBXSS 8.00 x 4.00 x x 10 x 11 E4PBXSS x 4.00 x x 10 x 11 E16PBXSS x x x 73 x 11 E16PBXSS x x x 73 x 11 Catalog number ending in 6 is Type 316L stainless steel. Stainless Steel Type Gauge Number of Holes Mounting G x H x x x x x x x x x x x x 51 Overall L x W 5.00 x x x x x 4. 9 x x x x x x x 79 T Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

22 Industrial Automation Supply - Tel: PuSHButton Enclosures Pushbutton Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 151

23 Industrial Automation Supply - Tel: PuSHButton Enclosures Pushbutton Enclosures EXTRA-DEEP.5-MM PUSHButtON ENCLOSURES, TYPE 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NEMA/eemAC Type 4X, 1, 13 CSA File Number 4186: Type 4, 4X, 1 iec 6059, IP66 APPliCatiON Designed to house.5-mm oil-tight pushbuttons, switches and pilot lights. Enclosures provide protection against dust, dirt, oil and water. Extra-deep design accommodates additional contact blocks for pushbuttons. SPECIFICatiONS type 304 stainless steel Seams continuously welded and ground smooth captivated stainless steel cover screws thread into sealed wells enclosures 8.50 x 4.00 x 4.75 in. (16 x 10 x 11 mm) and larger have internal detachable hinge to hold cover open during wiring, yet permit immediate removal Bonding provision on door; grounding nut on body oil-resistant gasket FiniSH Covers and sides of body have a smooth #4 brushed finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors, page 148 HOL-SEALerS TM Hole Seals Tamper-Resistant Screws BULLETIN: PB1S Standard Product Catalog Number AxBxC Body Gauge Cover Gauge Holes Mounting G x H E1PBGXSS 4.00 x 4.00 x x x 10 x x 80 EPBGXSS 6.00 x 4.00 x x x 10 x x 80 E3PBGXSS 8.00 x 4.00 x x x 10 x x 80 E4PBGXSS x 4.00 x x x 10 x x 80 Overall L x W 5.00 x x x x x 4. 9 x x x 107 F K M T V Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

24 Industrial Automation Supply - Tel: PuSHButton Enclosures Pushbutton Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 153

25 Industrial Automation Supply - Tel: PuSHButton Enclosures Pushbutton Enclosures 30.5-MM AND.5-MM PUSHButtON ENCLOSURES, TYPE 4X INDUSTRY STANDARDS UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NEMA/eemAC Type 4X, 1, 13 CSA File Number 4186: Type 4, 4X, 1 iec 6059, IP66 APPliCatiON Punched specifically to house either 30.5-mm or.5-mm oiltight pushbuttons, switches and pilot lights. Enclosures provide protection against dirt, dust, oil and water. See Mild Steel chapter for related mild steel enclosures. SPECIFICatiONS 14 gauge bodies, 16 gauge covers; Type 304 or Type 316 stainless steel Seams continuously welded and ground smooth captivated cover screws thread into sealed wells Bonding provision on door; grounding nut on body 4-way pushbutton holes accept all brands of oil-tight pushbuttons, switches and pilot lights enclosures with more than one column of pushbutton holes have internal detachable hinge to hold cover open during wiring, yet permit immediate removal oil-resistant gasket FiniSH Cover and sides of body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors, page 148 HOL-SEALerS TM Hole Seals Tamper-Resistant Screws BULLETIN: PB1S Standard Product Catalog Number AxBxC Hole Size Stainless Steel Type Gauge Number of Holes Mounting G x H E1PBSS 3.50 x 4.5 x mm Type x x 108 x x 60 E1PBSS x 4.5 x mm Type x x 108 x x 60 E1PBGSS 3.50 x 4.5 x.75.5 mm Type x x 108 x x 60 EPBSS 5.75 x 3.5 x mm Type x x 83 x x 60 EPBSS x 3.5 x mm Type x x 83 x x 60 EPBGSS 5.75 x 3.5 x.75.5 mm Type x x 83 x x 60 E3PBSS 8.00 x 3.5 x mm Type x x 83 x x 60 E3PBSS x 3.5 x mm Type x x 83 x x 60 E3PBGSS 8.00 x 3.5 x.75.5 mm Type x x 83 x x 60 E4PBSS x 3.5 x mm Type x x 83 x x 60 E4PBSS x 3.5 x mm Type x x 83 x x 60 E4PBGSS x 3.5 x.75.5 mm Type x x 83 x x 60 E6PBSS 9.50 x 6.5 x 30.5 mm Type x x 159 x 54 x 137 E6PBSS x 6.5 x 30.5 mm Type x x 159 x 54 x 137 E6PBGSS 9.50 x 6.5 x.5 mm Type x x 159 x 54 x 137 E9PBSS 9.50 x 8.50 x 30.5 mm Type x x 16 x 54 x 194 E9PBSS x 8.50 x 30.5 mm Type x x 16 x 54 x 194 Overall L x W 4.50 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 1 J T X Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

26 Industrial Automation Supply - Tel: PuSHButton Enclosures Pushbutton Enclosures Catalog Number AxBxC Hole Size Stainless Steel Type Gauge Number of Holes Mounting G x H E9PBGSS 9.50 x 8.50 x.5 mm Type x x 16 x 54 x 194 E1PBSS x 8.50 x 30.5 mm Type x x 16 x 311 x 194 E1PBSS x 8.50 x 30.5 mm Type x x 16 x 311 x 194 E1PBGSS x 8.50 x.5 mm Type x x 16 x 311 x 194 Catalog number ending in 6 is Type 316L stainless steel. Overall L x W x x x x x x x x 1 J T X Y EQUIPMENT PROTECTION PH FAX pentairprotect.com 155

27 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures WALL-MOUNT ENCLOSURES CONCEPT WALL-MOUNT ENCLOSURES CONCEPT, TYPE 4X INDUSTRY StanDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 VDE IP66 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON For indoor or outdoor applications that require corrosion protection from chemicals and water. CONCEPT Enclosures feature streamlined styling with an attractive stroked finish and flush quarter-turn latches for secure closure. Available in solid- and window-door models. SPECIFICATIONS manufactured from Type 304 or Type 316L stainless steel minimum-width body flange provides maximum body opening external formed 90-degree body flange Panel mounting studs fit optional CONCEPT panels and other accessories mounting holes in back of body for direct mounting or for optional external mounting brackets type 316 stainless steel hidden hinges promote clean aesthetic appearance corner formed doors are interchangeable and easily removed by pulling clip-style hinge pins Provision on door (except window-door style and when B = 1 in.) for thermoplastic data pocket Provision on door (except window-door style and when B = 1 in.) for optional doorstop kit Quarter-turn latches furnished with flush slotted insert Seamless foam-in-place gasket Self-grounding latch system with double seal Bonding provision on door; grounding stud on body Furnished hardware kit consists of panel-mounting nuts, panelgrounding hardware and sealing washers for wall-mounting holes installation instructions Window doors have a clear polycarbonate window FiniSH Door and body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Type 316 Stainless Steel Door Stop Kit concept Panels Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier Handles Lock Inserts See also the Popular Cooling Products and Accessories tables following the Standard Products tables. MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: CWS Standard Product One-Door Catalog Number AxBxC in. AxBxC mm Door Gauge Body Gauge Panel Conductive Panel Panel Size D x E (in.) Panel Size D x E (mm) Mounting G x H (in.) Mounting G x H (mm) Latches Qty. Style J (in.) J (mm) CSD116SS 1.00 x 1.00 x x 305 x CP11 CP11G 10.0 x x x x 67 1 Quarter-turn CSD116SS x 1.00 x x 305 x CP11 CP11G 10.0 x x x x 67 1 Quarter-turn CSD1616SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD1616SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD16166SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD16166SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD0166SS 0.00 x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD0166SS x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD006SS 0.00 x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD006SS x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD1618SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD1618SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD16168SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD16168SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD1608SS x 0.00 x x 508 x CP016 CP016G 18.0 x x x x Quarter-turn CSD1608SS x 0.00 x x 508 x CP016 CP016G 18.0 x x x x Quarter-turn CSD0168SS 0.00 x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD0168SS x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD008SS 0.00 x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD008SS x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD4168SS 4.00 x x x 406 x CP416 CP416G.0 x x x x Quarter-turn CSD4168SS x x x 406 x CP416 CP416G.0 x x x x Quarter-turn CSD408SS 4.00 x 0.00 x x 508 x CP40 CP40G.0 x x x x Quarter-turn CSD408SS x 0.00 x x 508 x CP40 CP40G.0 x x x x Quarter-turn CSD448SS 4.00 x 4.00 x x 610 x CP44 CP44.0 x x x x 57 Quarter-turn CSD448SS x 4.00 x x 610 x CP44 CP44G.0 x x x x 57 Quarter-turn SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

28 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures Catalog Number AxBxC in. AxBxC mm Door Gauge Body Gauge Panel Conductive Panel Panel Size D x E (in.) Panel Size D x E (mm) Mounting G x H (in.) Mounting G x H (mm) Latches Qty. Style J (in.) J (mm) CSD4308SS 4.00 x x x x CP304 CP3040G 8.0 x x x x 57 Quarter-turn CSD4308SS x x x x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD3048SS x 4.00 x 8.00 x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD3048SS x 4.00 x 8.00 x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD30308SS x x 8.00 x x CP3030 CP3030G 8.0 x x x x 74 Quarter-turn CSD30308SS x x 8.00 x x CP3030 CP3030G 8.0 x x x x 74 Quarter-turn CSD3648SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD3648SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD36308SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn CSD36308SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn CSD16110SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD16110SS x 1.00 x x 305 x CP161 CP161G 14.0 x x x x 67 1 Quarter-turn CSD161610SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD161610SS x x x 406 x CP1616 CP1616G 14.0 x x x x Quarter-turn CSD16010SS x 0.00 x x 508 x CP016 CP016G 18.0 x x x x Quarter-turn CSD16010SS x 0.00 x x 508 x CP016 CP016G 18.0 x x x x Quarter-turn CSD01610SS 0.00 x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD01610SS x x x 406 x CP016 CP016G 18.0 x x x x Quarter-turn CSD0010SS 0.00 x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD0010SS x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD0410SS 0.00 x 4.00 x x 610 x CP40 CP40G.0 x x x x 57 1 Quarter-turn CSD0410SS x 4.00 x x 610 x CP40 CP40G.0 x x x x 57 1 Quarter-turn CSD41610SS 4.00 x x x 406 x CP416 CP416G.0 x x x x Quarter-turn CSD41610SS x x x 406 x CP416 CP416G.0 x x x x Quarter-turn CSD4010SS 4.00 x 0.00 x x 508 x CP40 CP40G.0 x x x x Quarter-turn CSD4010SS x 0.00 x x 508 x CP40 CP40G.0 x x x x Quarter-turn CSD4410SS 4.00 x 4.00 x x 610 x CP44 CP44G.0 x x x x 57 Quarter-turn CSD4410SS x 4.00 x x 610 x CP44 CP44.0 x x x x 57 Quarter-turn CSD43010SS 4.00 x x x x CP304 CP304G 8.0 x x x x 74 Quarter-turn CSD43010SS x x x x CP304 CP304G 8.0 x x x x 74 Quarter-turn CSD30010SS x 0.00 x x 508 x CP300 CP300G 8.0 x x x x 470 Quarter-turn CSD30010SS x 0.00 x x 508 x CP300 CP300G 8.0 x x x x 470 Quarter-turn CSD30410SS x 4.00 x x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD30410SS x 4.00 x x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD303010SS x x x x CP3030 CP3030G 8.0 x x x x 74 Quarter-turn CSD303010SS x x x x CP3030 CP3030G 8.0 x x x x 74 Quarter-turn CSD36410SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD36410SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD363010SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn CSD363010SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn CSD48410SS x 4.00 x x 610 x CP484 CP484G 46.0 x x x x point CSD48410SS x 4.00 x x 610 x CP484 CP484G 46.0 x x x x point CSD001SS 0.00 x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD001SS x 0.00 x x 508 x CP00 CP00G 18.0 x x x x Quarter-turn CSD441SS 4.00 x 4.00 x x 610 x CP44 CP44G.0 x x x x 57 Quarter-turn CSD441SS x 4.00 x x 610 x CP44 CP44G.0 x x x x 57 Quarter-turn CSD3041SS x 4.00 x 1.00 x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD3041SS x 4.00 x 1.00 x 610 x CP304 CP304G 8.0 x x x x 57 Quarter-turn CSD30301SS x x 1.00 x x CP3030 CP x x x x 74 Quarter-turn CSD30301SS x x 1.00 x x CP3030 CP3030G 8.0 x x x x 74 Quarter-turn CSD3641SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD3641SS x 4.00 x x 610 x CP364 CP364G 34.0 x x x.50 8 x 57 Quarter-turn CSD36301SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn CSD36301SS x x x x CP3630 CP3630G 34.0 x x x x 74 Quarter-turn Catalog numbers ending in 6 are Type 316L stainless steel. Purchase panels separately. Optional stainless steel, composite and aluminum panels are also available for most sizes. Optional NEMA style steel and stainless steel panels require conversion kit catalog number CCPM4. EQUIPMENT PROTECTION PH FAX pentairprotect.com 157

29 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures Standard Product One-Door with Window Catalog Number AxBxC in. AxBxC mm Door Ga. Body Ga. Panel Panel Size D x E (in.) Panel Size D x E (mm) Mounting G x H (in.) Mounting G x H (mm) Window Size M x N (in.) Window Size M x N (mm) Latch Qty. Style J (in.) J (mm) CSD116WSS 1.00 x 1.00 x x 305 x CP x x x x x 7.10 x Quarter-turn CSD1616WSS x 1.00 x x 305 x CP x x x x x x Quarter-turn CSD0166WSS 0.00 x x x 406 x CP x x x x x x 8 1 Quarter-turn CSD006WSS 0.00 x 0.00 x x 508 x CP x x x x x x Quarter-turn CSD0168WSS 0.00 x x x 406 x CP x x x x x x 8 1 Quarter-turn CSD008WSS 0.00 x 0.00 x x 508 x CP x x x x x x Quarter-turn CSD408WSS 4.00 x 0.00 x x 508 x CP40.0 x x x x x x Quarter-turn CSD448WSS 4.00 x 4.00 x x 610 x CP44.0 x x x x x x 449 Quarter-turn CSD3048WSS x 4.00 x 8.00 x 610 x CP x x x x x x 449 Quarter-turn CSD16110WSS x 1.00 x x 305 x CP x x x x x x Quarter-turn CSD01610WSS 0.00 x x x 406 x CP x x x x x x 8 1 Quarter-turn CSD0010WSS 0.00 x 0.00 x x 508 x CP x x x x x x Quarter-turn CSD4010WSS 4.00 x 0.00 x x 508 x CP40.0 x x x x x x Quarter-turn CSD4410WSS 4.00 x 4.00 x x 610 x CP44.0 x x x x x x 449 Quarter-turn CSD30410WSS x 4.00 x x 610 x CP x x x x x x 449 Quarter-turn CSD001WSS 0.00 x 0.00 x x 508 x CP x x x x x x Quarter-turn CSD3041WSS x 4.00 x 1.00 x 610 x CP x x x x x x 449 Quarter-turn Purchase panels separately. Optional NEMA style steel and stainless steel panels require conversion kit catalog number CCPM4. Material is stainless steel Type 304. For Conductive Panels, add a G to the panel catalog number. 158 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

30 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures Popular Cooling Products Enclosure Depth (C Dimension) Filter Fans* 6 in. (15 mm) SF in. (03 mm) SF in. (54 mm) SF in. (305 mm) SF *Important: Visit tools.hoffmanonline.com/attachments to access our Cooling Selection Tool to determine the appropriate cooling solution for your application. Popular Accessories Enclosure Width (B Dimension) Lights Hole Seals Window Kits 1 in. (305 mm) LEDPUCK AS050SS APWK53NFSS 16 in. (406 mm) LEDAM35 AS050SS APWK53NFSS 0 in. (508 mm) LED4V15 AS050SS APWK53NFSS 4 in. (610 mm) LED4V15 AS050SS APWK53NFSS 30 in. ( mm) LED4V15 AS050SS APWK53NFSS EQUIPMENT PROTECTION PH FAX pentairprotect.com 159

31 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures CONCEPT WitH ADDITIONAL QUARteR-tuRN LATCHES, TYPE 4X SPECIFICATIONS manufactured from 14 gauge Type 304 or Type 316L stainless steel Seams continuously welded and ground smooth minimum-width body flange provides maximum body opening corner formed doors external formed 90-degree body flange Stainless steel quarter-turn latches with flush slotted insert provided on three sides of enclosure door integral door alignment device to properly align door and gasket to body offset Panel mounting studs fit optional CONCEPT panels and other accessories mounting holes in back of body for direct mounting or for optional external mounting brackets Stainless steel hidden hinges Doors are interchangeable and easily removed by pulling clipstyle hinge pins Provision on door for thermoplastic data pocket Provision on door for optional doorstop kit Seamless foam-in-place gasket Self-grounding latch system with double seal Bonding provision on door; grounding stud on body Furnished hardware kit consists of panel mounting nuts, panel grounding hardware and sealing washers for wall-mounting holes installation instructions INDUSTRY StanDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File Number E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON For indoor or outdoor applications that require corrosion protection from chemicals and water, CONCEPT enclosures house larger controls and feature streamlined styling with an attractive stroked finish, flush quarter-turn latches and an integral door ramp that ensures the door gasket sealing surface aligns with the enclosure body for secure closure. FiniSH Door and body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors Type 316 Stainless Steel Door Stop Kit concept Panels Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier Handles Lock Inserts MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: CWS 160 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

32 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures Standard Product Catalog Number AxBxC Door Gauge Body Gauge Panel Conductive Panel Panel Size D x E CSD363610SSR x x CP3636 CP3636G 34.0 x x 914 x x 869 CSD363610SS6R x x CP3636 CP3636G 34.0 x x 914 x x 869 CSD43610SSR 4.00 x x CP436 CP436G 40.0 x x 914 x x 869 CSD43610SS6R 4.00 x x CP436 CP436G 40.0 x x 914 x x 869 CSD483610SSR x x CP4836 CP4836G 46.0 x x 914 x x 869 CSD483610SS6R x x CP4836 CP4836G 46.0 x x 914 x x 869 CSD603610SSR x x CP6036 CP6036G 58.0 x x 914 x x 869 CSD603610SS6R x x CP6036 CP6036G 58.0 x x 914 x x 869 CSD36361SSR x x CP3636 CP3636G 34.0 x x 914 x x 869 CSD36361SS6R x x CP3636 CP3636G 34.0 x x 914 x x 869 CSD4361SSR 4.00 x x CP436 CP436G 40.0 x x 914 x x 869 CSD4361SS6R 4.00 x x CP436 CP436G 40.0 x x 914 x x 869 CSD48361SSR x x CP4836 CP4836G 46.0 x x 914 x x 869 CSD48361SS6R x x CP4836 CP4836G 46.0 x x 914 x x 869 CSD60361SSR x x CP6036 CP6036G 58.0 x x 914 x x 46 CSD60361SS6R x x CP6036 CP6036G 58.0 x x 914 x x 46 CSD7361SSR 7.00 x x CP x x 914 x x 46 CSD73616SSR 7.00 x x CP x x 914 x x 46 Purchase panels separately. Optional NEMA style steel and stainless steel panels require conversion kit catalog number CCPM-4. Catalog numbers ending in 6R are Type 316L stainless steel. Mounting G x H x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 8 Latches Qty. Style J 4 Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn Quarter-turn 584 EQUIPMENT PROTECTION PH FAX pentairprotect.com 161

33 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures CONCEPT SLOPED TOP, TYPE 4X INDUSTRY STANDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 VDE IP66 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON For indoor or outdoor applications that require a sloped top and corrosion protection from chemicals and water. CONCEPT Enclosures feature streamlined styling with an attractive stroked finish and flush, stainless steel quarter-turn latches for secure closure. SPECIFICatiONS manufactured from 16 and 14 gauge Type 304 stainless steel 0 degree sloped top prevents pooling of liquids and accumulation of other debris minimum-width body flange provides maximum body opening external formed 90-degree body flange Panel mounting studs fit optional CONCEPT panels and other accessories mounting holes in back of body for direct mounting or for optional external mounting brackets type 304 stainless steel hidden hinges promote clean aesthetic appearance (two hinges on models under 36 in. in height; three hinges for models 36 in. and taller) corner-formed doors are interchangeable and easily removed by pulling clip-style hinge pins Provision on door for thermoplastic data pocket Provision on door for optional door stop kit Seams continuously welded and ground smooth Stainless steel quarter-turn latches furnished with flush slotted insert Seamless foam-in-place gasket Self-grounding latch system with double seal Bonding provision on door; grounding stud on body Furnished hardware kit consists of panel-mounting nuts, panelgrounding hardware and sealing washers for wall-mounting holes installation instructions FiniSH Door and body have smooth, #4 brushed finish. ACCESSORieS See also Accessories. Panels Type 316 Stainless Steel Door Stop Kit concept Panels Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier Handles Lock Inserts MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: CWS 16 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

34 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures Standard Product Catalog Number AxBxC CSD1618SSST x 1.00 x x 305 x 03 CSD16168SSST x x x 406 x 03 CSD0168SSST 0.00 x x x 406 x 03 CSD008SSST 0.00 x 0.00 x x 508 x 03 CSD001SSST 0.00 x 0.00 x x 508 x 305 CSD408SSST 4.00 x 0.00 x x 508 x 03 CSD448SSST 4.00 x 4.00 x x 610 x 03 CSD441SSST 4.00 x 4.00 x x 610 x 305 CSD3048SSST x 4.00 x 8.00 x 610 x 03 CSD3041SSST x 4.00 x 1.00 x 610 x 305 CSD30308SSST x x 8.00 x x 03 CSD3648SSST x 4.00 x x 610 x 03 CSD36308SSST x x x x 03 CSD36301SSST x x x x 305 CSD36361SSST x x x 914 x 305 CSD483616SSST x x x 914 x 406 CSD603616SSST x x x 914 x 406 Purchase panels separately. A Door Gauge Body Gauge Panel Conductive Panel Panel Size D x E CP16 CP161G 14.0x x CP1616 CP1616G 14.0x x CP016 CP016G 18.0x x CP00 CP00G 18.0x x CP00 CP00G 18.0x x CP40 CP40G.0x x CP44 CP44G.0x x CP44 CP44G.0x x CP304 CP304G 8.0x x CP304 CP304G 8.0x x CP3030 CP3030G 8.0x x CP364 CP364G 34.0x x CP3630 CP3630G 34.0x x CP3630 CP3630G 34.0x x CP3636 CP3636G 34.0x x CP4836 CP4836G 46.0x x CP6036 CP6036G 58.0x x869 Mounting H x G 14.50x x x x x x x x x x470.50x x470.50x.50 57x57.50x.50 57x x.50 74x x.50 74x x x x.50 8x x8.50 8x x8.50 8x x x x x x x1486 Latch Qty EQUIPMENT PROTECTION PH FAX pentairprotect.com 163

35 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures CONCEPT EMC, TYPE 4X INDUSTRY StanDARDS Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File No. E61997 NEMA/eemAC Type 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 VDE IP66 iec 6059, IP66 APPLICATION Use stylish CONCEPT EMC Enclosures with their convenient quarter-turn latches in corrosive indoor or outdoor applications to contain stray electromagnetic interference (EMI) signals produced by internal components and to shield those components from external EMI/RFI interference. SPECIFICatiONS manufactured from 18, 16 and 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth minimum-width body flange provides maximum body opening external formed 90-degree body flange Panel mounting studs fit optional CONCEPT panels and other accessories mounting holes in back of body for direct mounting or for optional external mounting brackets Stainless steel hidden hinges easy-to-remove clip-style hinge pins removable corner formed door Seamless foam-in-place gasket adjacent to spring finger EMC gasket Quarter-turn latches with flush slotted insert Self-grounding latch system with double seal integral body grounding stud Furnished hardware kit includes panel mounting nuts, grounding hardware and sealing washers for wall-mounting holes installation instructions FiniSH Cover and body have smooth brushed #4 finish. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors concept Panels Handles Lock Inserts BULLETIN: CWSEM Standard Product Catalog Number AxBxC CSD116EMCSS 1.00 x 1.00 x x 305 x 15 CSD1616EMCSS x 1.00 x x 305 x 15 CSD16166EMCSS x x x 406 x 15 CSD0166EMCSS 0.00 x x x 406 x 15 CSD1608EMCSS x 0.00 x x 508 x 03 CSD408EMCSS 4.00 x 0.00 x x 508 x 03 CSD448EMCSS 4.00 x 4.00 x x 610 x 03 CSD3048EMCSS x 4.00 x 8.00 x 610 x 03 CSD36308EMCSS x x x x 03 CSD441EMCSS 4.00 x 4.00 x x 610 x 305 CSD3641EMCSS x 4.00 x x 610 x 305 Purchase panels separately. Door Gauge Body Gauge Panel Conductive Panel Panel Size D x E CP11 CP11G 10.0 x x CP161 CP161G 14.0 x x CP1616 CP1616G 14.0 x x CP016 CP016G 18.0 x x CP016 CP016G 18.0 x x CP40 CP40G.0 x x CP44 CP44G.0 x x CP304 CP304G 8.0 x x CP3630 CP3630G 34.0 x x CP44 CP44G.0 x x CP364 CP364G 34.0 x x 564 Mounting G x H x x x x x x x x x x x x x x x x x x x x x.50 8 x 57 Latches J Qty SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

36 Industrial Automation Supply - Tel: Wall-Mount EnclOSures CONCept Wall-Mount Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 165

37 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories WALL-MOUNT ENCLOSURES AND ACCESSORIES COntinuOUS HinGE WitH 3-POint LATCH, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 iec 6059, IP66 Meets NEMA Type 3RX requirements APPLICATION These enclosures feature Hoffman s exclusive POWerGLIDE Handle with 3-point latching, ideal for indoor or outdoor applications that require corrosion protection, convenient access, and padlocking security. SPECIFICatiONS 14 gauge Type 304 or 316L stainless steel bodies and doors Seams continuously welded and ground smooth Seamless foam-in-place gasket rolled lip around three sides of door internal 3-point latch and Type 316L stainless steel padlocking POWerGLIDE Handle remove door by pulling stainless steel continuous hinge pin Data pocket is high-impact thermoplastic collar studs provided for mounting optional panels exterior hardware on Type 316L stainless steel enclosures matches enclosure material Bonding provision on door; grounding stud on body FiniSH Door, sides, top and bottom have smooth #4 brushed finish. Handle is electropolished. ACCESSORieS See also Accessories. Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Steel and Stainless Steel Window Kits Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SW3 Standard Product Catalog Number AxBxC A4H006SSLP3PT 4.00 x 0.00 x x 508 x 15 A4H006SS6LP3PT 4.00 x 0.00 x x 508 x 15 A4H008SSLP3PT 4.00 x 0.00 x x 508 x 03 A4H008SS6LP3PT 4.00 x 0.00 x x 508 x 03 A4H408SSLP3PT 4.00 x 4.00 x x 610 x 03 A4H408SS6LP3PT 4.00 x 4.00 x x 610 x 03 A30H408SSLP3PT x 4.00 x 8.00 x 610 x 03 A30H408SS6LP3PT x 4.00 x 8.00 x 610 x 03 A30H3008SSLP3PT x x 8.00 x x 03 A30H3008SS6LP3PT x x 8.00 x x 03 A36H408SSLP3PT x 4.00 x x 610 x 03 A36H408SS6LP3PT x 4.00 x x 610 x 03 A36H3008SSLP3PT x x x x 03 A36H3008SS6LP3PT x x x x 03 A48H3608SSLP3PT x x x 914 x 03 A48H3608SS6LP3PT x x x 914 x 03 A4H010SSLP3PT 4.00 x 0.00 x x 508 x 54 Stainless F Steel Type L L L L L L L L 304 Steel Panel Conductive Panel Stainless Steel Panel Panel Size D x E A4P0 A4P0G A4P0SS x x 43 A4P0 A4P0G A4P0SS x x 43 A4P0 A4P0G A4P0SS x x 43 A4P0 A4P0G A4P0SS x x 43 A4P4 A4P4G A4P4SS x x 533 A4P4 A4P4G A4P4SS x x 533 A30P4 A30P4G A30P4SS x x 533 A30P4 A30P4G A30P4SS x x 533 A30P30 A30P30G A30P30SS x x 686 A30P30 A30P30G A30P30SS x x 686 A36P4 A36P4G A36P4SS6 3 x x 533 A36P4 A36P4G A36P4SS6 3 x x 533 A36P30 A36P30G A36P30SS6 3 x x 686 A36P30 A36P30G A36P30SS6 3 x x 686 A48P36 A48P36G A48P36SS x x 838 A48P36 A48P36G A48P36SS x x 838 A4P0 A4P0G A4P0SS x x 43 Data Pocket Small Small Small Small Small Small Large Large Large Large Large Large Large Large Large Large Small 166 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

38 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Catalog Number AxBxC Stainless Steel Type F Steel Panel Conductive Panel Stainless Steel Panel Panel Size D x E A4H010SS6LP3PT 4.00 x 0.00 x L A4P0 A4P0G A4P0SS x x 508 x x 43 A36H3010SSLP3PT x x A36P30 A36P30G A36P30SS6 3 x x x x 686 A36H3010SS6LP3PT x x L A36P30 A36P30G A36P30SS6 3 x x x x 686 A4H3010SSLP3PT 4.00 x x A4P30 A4P30G A4P30SS x x x x 686 A48H3610SSLP3PT x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H3610SS6LP3PT x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A4H41SSLP3PT 4.00 x 4.00 x A4P4 A4P4G A4P4SS x x 610 x x 533 A4H41SS6LP3PT 4.00 x 4.00 x L A4P4 A4P4G A4P4SS x x 610 x x 533 A30H41SSLP3PT x 4.00 x A30P4 A30P4G A30P4SS x x 610 x x 533 A30H41SS6LP3PT x 4.00 x L A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A36H301SSLP3PT x x A36P30 A36P30G A36P30SS6 3 X x x x 686 A36H301SS6LP3PT x x L A36P30 A36P30G A36P30SS6 3 X x x x 686 A36H361SSLP3PT x x A36P36 A36P36G A36P36SS6 3 x x 914 x x 838 A36H361SS6LP3PT x x L A36P36 A36P36G A36P36SS6 3 x x 914 x x 838 A4H361SSLP3PT 4.00 x x A4P36 A4P36G A4P36SS x x 914 x x 838 A48H361SSLP3PT x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H361SS6LP3PT x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A60H361SSLP3PT x x A60P36 A60P36G A60P36SS x x 914 x x 838 A60H361SS6LP3PT x x L A60P36 A60P36G A60P36SS x x 914 x x 838 A48H3616SSLP3PT x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H3616SS6LP3PT x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A60H3616SSLP3PT x x A60P36 A60P36G A60P36SS x x 914 x x 838 A60H3616SS6LP3PT x x L A60P36 A60P36G A60P36SS x x 914 x x 838 Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. Data Pocket Small Large Large Large Large Large Small Small Large Large Large Large Large Large Large Large Large Large Large Large Large Large Large EQUIPMENT PROTECTION PH FAX pentairprotect.com 167

39 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories COntinuOUS HinGE WitH ClaMPS, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3, 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 iec 6059, IP66 Meets NEMA Type 3RX requirements APPLICATION For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants. SPECIFICatiONS 14 gauge Type 304 or Type 316L stainless steel bodies and doors Seams continuously welded and ground smooth Seamless foam-in-place gasket rolled lip around three sides of door Stainless steel door clamp assembly Hasp and staple for padlocking Door removed by pulling stainless steel continuous hinge pin Data pocket is high-impact thermoplastic collar studs provided for mounting optional panels exterior hardware on Type 316L stainless steel enclosures matches enclosure material Bonding provision on door; grounding stud on body FiniSH Door, sides, top and bottom have smooth #4 brushed finish. ACCESSORieS See also Accessories. Fast-Operating Clamp Assembly Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Junction Box and Wall-Mount Enclosure Swing Out Panel Kit Steel and Stainless Steel Window Kits Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4S Standard Product Catalog Number AxBxC A16H106SSLP x 1.00 x x 305 x 15 A16H106SS6LP x 1.00 x x 305 x 15 A16H1606SSLP x x x 406 x 15 A16H1606SS6LP x x x 406 x 15 A16H006SSLP x 0.00 x x 508 x 15 A16H006SS6LP x 0.00 x x 508 x 15 A0H1606SSLP 0.00 x x x 406 x 15 A0H1606SS6LP 0.00 x x x 406 x 15 A0H006SSLP 0.00 x 0.00 x x 508 x 15 A0H006SS6LP 0.00 x 0.00 x x 508 x 15 A4H006SSLP 4.00 x 0.00 x x 508 x 15 A4H006SS6LP 4.00 x 0.00 x x 508 x 15 A4H406SSLP 4.00 x 4.00 x x 610 x 15 A4H406SS6LP 4.00 x 4.00 x x 610 x 15 A16H108SSLP x 1.00 x x 305 x 03 A16H108SS6LP x 1.00 x x 305 x 03 A0H1608SSLP 0.00 x x x 406 x 03 Stainless Steel Type Steel Panel Conductive Steel Panel Stainless Steel Panel Panel Size D x E 304 A16P1 A16P1G A16P1SS6 1 x x 9 316L A16P1 A16P1G A16P1SS6 1 x x A16P16 A16P16G A16P16SS6 1 x x L A16P16 A16P16G A16P16SS6 1 x x A0P16 A0P16G A0P16SS x 1 43 x L A0P16 A0P16G A0P16SS x 1 43 x A0P16 A0P16G A0P16SS x 1 43 x L A0P16 A0P16G A0P16SS x 1 43 x A0P0 A0P0G A0P0SS x x L A0P0 A0P0G A0P0SS x x A4P0 A4P0G A4P0SS x x L A4P0 A4P0G A4P0SS x x A4P4 A4P4G A4P4SS x x L A4P4 A4P4G A4P4SS x x A16P1 A16P1G A16P1SS6 1 x x 9 316L A16P1 A16P1G A16P1SS6 1 x x A0P16 A0P16G A0P16SS x 1 43 x 330 F Clamps Data Qty. Pocket 4 Small 4 Small 4 Small 4 Small 4 Small 4 Small 4 Small 4 Small 4 Small 4 Small 5 Small 5 Small 5 Small 5 Small 4 Small 4 Small 4 Small 168 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

40 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Catalog Number AxBxC A0H1608SS6LP 0.00 x x x 406 x 03 A0H008SSLP 0.00 x 0.00 x x 508 x 03 A0H008SS6LP 0.00 x 0.00 x x 508 x 03 A0H408SSLP 0.00 x 4.00 x x 610 x 03 A0H408SS6LP 0.00 x 4.00 x x 610 x 03 A4H1608SSLP 4.00 x x x 406 x 03 A4H1608SS6LP 4.00 x x x 406 x 03 A4H008SSLP 4.00 x 0.00 x x 508 x 03 A4H008SS6LP 4.00 x 0.00 x x 508 x 03 A4H408SSLP 4.00 x 4.00 x x 610 x 03 A4H408SS6LP 4.00 x 4.00 x x 610 x 03 A4H3008SSLP 4.00 x x x x 03 A4H3008SS6LP 4.00 x x x x 03 A30H008SSLP x 0.00 x 8.00 x 508 x 03 A30H008SS6LP x 0.00 x 8.00 x 508 x 03 A30H408SSLP x 4.00 x 8.00 x 610 x 03 A30H408SS6LP x 4.00 x 8.00 x 610 x 03 A30H3008SSLP x x 8.00 x x 03 A30H3008SS6LP x x 8.00 x x 03 A36H408SSLP x 4.00 x x 610 x 03 A36H408SS6LP x 4.00 x x 610 x 03 A36H3008SSLP x x x x 03 A36H3008SS6LP x x x x 03 A4H3608SSLP 4.00 x x x 914 x 03 A4H3608SS6LP 4.00 x x x 914 x 03 A48H3608SSLP x x x 914 x 03 A48H3608SS6LP x x x 914 x 03 A0H1610SSLP 0.00 x x x 406 x 54 A0H1610SS6LP 0.00 x x x 406 x 54 A4H010SSLP 4.00 x 0.00 x x 508 x 54 A4H010SS6LP 4.00 x 0.00 x x 508 x 54 A30H410SSLP x 4.00 x x 610 x 54 A30H410SS6LP x 4.00 x x 610 x 54 A36H410SSLP x 4.00 x x 610 x 54 A36H410SS6LP x 4.00 x x 610 x 54 A36H3010SSLP x x x x 54 A36H3010SS6LP x x x x 54 A4H3010SSLP 4.00 x x x x 54 A4H3010SS6LP 4.00 x x x x 54 Stainless Steel Type Steel Panel Conductive Steel Panel Stainless Steel Panel Panel Size D x E 316L A0P16 A0P16G A0P16SS x 1 43 x A0P0 A0P0G A0P0SS x x L A0P0 A0P0G A0P0SS x x A4P0 A4P0G A4P0SS x x L A4P0 A4P0G A4P0SS x x A4P16 A4P16G A4P16SS x x L A4P16 A4P16G A4P16SS x x A4P0 A4P0G A4P0SS x x L A4P0 A4P0G A4P0SS x x A4P4 A4P4G A4P4SS x x L A4P4 A4P4G A4P4SS x x A30P4 A30P4G A30P4SS x x L A30P4 A30P4G A30P4SS x x A30P0 A30P0G A30P0SS x x L A30P0 A30P0G A30P0SS x x A30P4 A30P4G A30P4SS x x L A30P4 A30P4G A30P4SS x x A30P30 A30P30G A30P30SS x x L A30P30 A30P30G A30P30SS x x A36P4 A36P4G A36P4SS6 3 x x L A36P4 A36P4G A36P4SS6 3 x x A36P30 A36P30G A36P30SS6 3 x x L A36P30 A36P30G A36P30SS6 3 x x A4P36 A4P36G A4P36SS x x L A4P36 A4P36G A4P36SS x x A48P36 A48P36G A48P36SS x x L A48P36 A48P36G A48P36SS x x A0P16 A0P16G A0P16SS x 1 43 x L A0P16 A0P16G A0P16SS x 1 43 x A4P0 A4P0G A4P0SS x x L A4P0 A4P0G A4P0SS x x A30P4 A30P4G A30P4SS x x L A30P4 A30P4G A30P4SS x x A36P4 A36P4G A36P4SS6 3 x x L A36P4 A36P4G A36P4SS6 3 x x A36P30 A36P30G A36P30SS6 3 x x L A36P30 A36P30G A36P30SS6 3 x x A4P30 A4P30G A4P30SS x x L A4P30 A4P30G A4P30SS x x 686 F Clamps Data Qty. Pocket 4 Small 4 Small 4 Small 4 Small 4 Small 5 Small 5 Small 5 Small 5 Small 5 Small 5 Small 7 Small 7 Small 5 Small 5 Small 5 Large 5 Large 7 Large 7 Large 5 Large 5 Large 7 Large 7 Large 8 Large 8 Large 8 Large 8 Large 4 Small 4 Small 5 Small 5 Small 5 Large 5 Large 5 Large 5 Large 7 Large 7 Large 8 Large 8 Large EQUIPMENT PROTECTION PH FAX pentairprotect.com 169

41 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Catalog Number AxBxC Stainless Steel Type Steel Panel Conductive Steel Panel Stainless Steel Panel Panel Size D x E A48H3610SSLP x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H3610SS6LP x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A4H41SSLP 4.00 x 4.00 x A4P4 A4P4G A4P4SS x x 610 x x 533 A4H41SS6LP 4.00 x 4.00 x L A4P4 A4P4G A4P4SS x x 610 x x 533 A30H41SSLP x 4.00 x A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A30H41SS6LP x 4.00 x L A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A36H301SSLP x x A36P30 A36P30G A36P30SS6 3 x x x x 686 A36H301SS6LP x x L A36P30 A36P30G A36P30SS6 3 x x x x 686 A36H361SSLP x x A36P36 A36P36G A36P36SS6 3 x x 914 x x 838 A36H361SS6LP x x L A36P36 A36P36G A36P36SS6 3 x x 914 x x 838 A48H361SSLP x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H361SS6LP x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A60H361SSLP x x A60P36 A60P36G A60P36SS x x 914 x x 838 A60H361SS6LP x x L A60P36 A60P36G A60P36SS x x 914 x x 838 A30H416SSLP x 4.00 x A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A30H416SS6LP x 4.00 x L A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A36H3016SSLP x x A36P30 A36P30G A36P30SS6 3 x x x x 686 A36H3016SS6LP x x L A36P30 A36P30G A36P30SS6 3 x x x x 686 A48H3616SSLP x x A48P36 A48P36G A48P36SS x x 914 x x 838 A48H3616SS6LP x x L A48P36 A48P36G A48P36SS x x 914 x x 838 A60H3616SSLP x x A60P36 A60P36G A60P36SS x x 914 x x 838 A60H3616SS6LP x x L A60P36 A60P36G A60P36SS x x 914 x x 838 Purchase panels separately. Optional composite and aluminum panels are available for most sizes. F Clamps Data Qty. Pocket 8 Large 8 Large 5 Small 5 Small 5 Large 5 Large 7 Large 7 Large 7 Large 7 Large 8 Large 8 Large 9 Large 9 Large 5 Large 5 Large 7 Large 7 Large 8 Large 8 Large 9 Large 9 Large 170 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

42 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Popular Cooling Products Enclosure Depth (C Dimension) Thermoelectric Controller 6 in. (15 mm) TE in. (03 mm) TE in. (54 mm) TE in. (305 mm) TE in. (406 mm) TE *Important: Visit tools.hoffmanonline.com/attachments to access our Cooling Selection Tool to determne the appropriate cooling solution for your application. Popular Accessories Enclosure Width (B Dimension) Lights Hole Seals Window Kits 1 in. (305 mm) LEDPUCK AS050SS APWK53NFSS 16 in. (406 mm) LEDAM35 AS050SS APWK53NFSS 0 in. (508 mm) LED4V15 AS050SS APWK53NFSS 4 in. (610 mm) LED4V15 AS050SS APWK53NFSS 30 in. ( mm) LED4V15 AS050SS APWK53NFSS 36 in. (914 mm) LED4V15 AS050SS APWK53NFSS EQUIPMENT PROTECTION PH FAX pentairprotect.com 171

43 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories COntinuOUS HinGE WitH ClaMPS, EMC, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 iec 6059, IP66 APPliCatiON Ideal for indoor or outdoor EMC applications to contain larger controls in corrosive environments. Features a stainless steel, woven-mesh encased gasket to keep out contaminants and provide emi/rfi shielding to internal components. SPECIFICATIONS 14 gauge Type 304 stainless steel bodies and doors Seams continuously welded and ground smooth Seamless foam-in-place gasket adjacent to woven monel EMC mesh gasket rolled lip around three sides of door Stainless steel door clamp assemblies Hasp and staple for padlocking removable door with continuous hinge Data pocket is high impact thermoplastic collar studs provided for mounting optional panels Bonding provision on door; grounding stud on body FiniSH Door, sides, top and bottom have a smooth brushed #4 finish. ACCESSORieS See also Accessories. Fast-Operating Clamp Assembly PAneLite Enclosure Lights Overview Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Rack Mounting Angle Kit - L Style Junction Box and Wall-Mount Enclosure Swing Out Panel Kit Terminal Block Kit Assembly for Junction Boxes Overview BULLETIN: A4SEM Standard Product Catalog Number AxBxC Conductive Steel Panel Panel Size D x E F A16106LPEMCSS x 1.00 x 6.00 A16P1G 1 x x 305 x x 9 3 A01606LPEMCSS 0.00 x x 6.00 A0P16G x x 406 x x 330 A4006LPEMCSS 4.00 x 0.00 x 6.00 A4P0G 1.00 x x 508 x x 43 A4408LPEMCSS 4.00 x 4.00 x 8.00 A4P4G 1.00 x x 610 x x 533 A30408LPEMCSS x 4.00 x 8.00 A30P4G 7.00 x 1.00 x 610 x x 533 A363008LPEMCSS x x 8.00 A36P30G 3 x x x x 686 A483608LPEMCSS x x 8.00 A48P36G x x 914 x x 838 A60361LPEMCSS x x 1.00 A60P36G x x 914 x x 838 Purchase panels separately. Optional conductive, mild steel, stainless steel, aluminum and composite panels are available for most sizes. See Accessories. Clamps Qty. Data Pocket 4 Small 4 Small 5 Small 5 Small 5 Large 7 Large 8 Large 9 Large 17 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

44 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories EQUIPMENT PROTECTION PH FAX pentairprotect.com 173

45 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories COntinuOUS HinGE TWO-DOOR WitH 3-POint LATCH, TYPE 4X APPLICATION These two-door wall-mount enclosures provide industry-leading protection for components in corrosive or wet environments. Enclosures have a removable centerpost for easy panel installation, 3-point latching with Hoffman s exclusive POWerGLIDE Handles, and a seamless foam-in-place gasket for sealing protection from contaminants. INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File Number E61997 NEMA Type 3, 3R, 4, 4X, 1, 13 iec 6059, IP66 Meets NEMA Type 3RX requirements SPECIFICatiONS manufactured from 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth removable centerpost for easy panel installation Flange trough collar around all sides of enclosure door openings external mounting brackets Heavy-duty 3-point latching mechanism operated by Type 316 stainless steel POWerGLIDE padlocking handles easily removable doors by pulling heavy gauge continuous hinge pin Data pocket is high-impact thermoplastic Seamless foam-in-place gasket collar studs provided for mounting optional panels Bonding provisions on doors; grounding studs on body FiniSH Doors, sides, top and bottom have smooth #4 brushed finish. ACCESSORieS See also Accessories. Floor Stand Kit, Stainless Steel PAneLite Enclosure Lights Overview Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Steel and Stainless Steel Window Kits Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SW Standard Product Catalog Number AxBxC Mild Steel Panel Conductive Panel Panel Gauge Panel Size D x E A4H408WFSSLP3PT 4.00 x 4.00 x 8.00 A4P4 A4P4G x x 1067 x x 533 A4H4808WFSSLP3PT 4.00 x x 8.00 A48P4 A48P4G x x 119 x x 533 A30H410WFSSLP3PT x 4.00 x A4P30 A4P30G x 7.00 x 1067 x x 686 A30H4810WFSSLP3PT x x A48P30 A48P30G x 7.00 x 119 x x 686 A30H6010WFSSLP3PT x x A60P30 A60P30G x 7.00 x 154 x x 686 A36H41WFSSLP3PT x 4.00 x 1.00 A4P36 A4P36G x x 1067 x x 838 A36H481WFSSLP3PT x x 1.00 A48P36 A48P36G x x 119 x x 838 A36H601WFSSLP3PT x x 1.00 A60P36 A60P36G x x 154 x x 838 A4H41WFSSLP3PT 4.00 x 4.00 x 1.00 A4P4 A4P4G x x 1067 x x 991 A4H481WFSSLP3PT 4.00 x x 1.00 A48P4 A48P4G x x 119 x x 991 A4H601WFSSALP3PT 4.00 x x 1.00 A60BFP4 A60BFP4G x x 154 x x 965 A48H481WFSSLP3PT x x 1.00 A48P48 A48P48G x x 119 x x 1118 Purchase panels separately. Optional stainless steel panels are available for most sizes. Enclosure backs for A4H41WFSSLP3PT, A4H481WFSSLP3PT and A4H601WFSSALP3PT have internal stiffeners. A48H481WFSSLP3PT is 14 gauge with a 1 gauge back. Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

46 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories COntinuOUS HinGE TWO-DOOR WitH 3-POint LATCH, TYPE 1 SPECIFICATIONS 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth rolled lip around all sides of enclosure body opening Gasketed overlapping doors eliminate need for centerpost external mounting brackets Plated steel 3-point latching mechanism and keylocking handle easily removable doors by pulling heavy-gauge continuous hinge pin Data pocket is high-impact thermoplastic collar studs provided for mounting optional panels Bonding provision on doors; grounding studs on body INDUSTRY StanDARDS UL 508A Listed; Type 1; File No. E61997 cul Listed per CSA C. No 94; Type 1; File No. E61997 NEMA/EEMAC Type 1 CSA File No. 4186: Type 1 iec 6059, IP55 APPliCatiON For indoor applications requiring stainless steel, enclosure features overlapping doors and a centerpost-free interior for easy panel and component installation. The enclosure is secured by a single keylocking handle and three-point latching. FiniSH Doors, sides, top and bottom have smooth #4 brushed finish. ACCESSORieS See also Accessories. Floor Stand Kit, Stainless Steel PAneLite Enclosure Lights Overview Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Steel and Stainless Steel Window Kits Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A1SW EQUIPMENT PROTECTION PH FAX pentairprotect.com 175

47 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Standard Product Catalog Number AxBxC Panel Conductive Panel Panel Gauge Panel Size D x E A4408WFSSLP 4.00 x 4.00 x 8.00 A4P4 A4P4G x x 1067 x x 533 A44808WFSSLP 4.00 x x 8.00 A48P4 A48P4G x x 119 x x 533 A30410WFSSLP x 4.00 x A4P30 A4P30G x 7.00 x 1067 x x 686 A304810WFSSLP x x A48P30 A48P30G x 7.00 x 119 x x 686 A306010WFSSLP x x A60P30 A60P30G x 7.00 x 154 x x 686 A3641WFSSLP x 4.00 x 1.00 A4P36 A4P36G x x 1067 x x 838 A36481WFSSLP x x 1.00 A48P36 A48P36G x x 119 x x 838 A36601WFSSLP x x 1.00 A60P36 A60P36G x x 154 x x 838 A441WFSSLP 4.00 x 4.00 x 1.00 A4P4 A4P4G x x 1067 x x 991 A4481WFSSLP 4.00 x x 1.00 A48P4 A48P4G x x 119 x x 991 A4601WFSSALP 4.00 x x 1.00 A60BFP4 A60BFP4G x x 154 x x 965 A48481WFSSLP x x 1.00 A48P48 A48P48G x x 119 x x 1118 Purchase panels separately. Optional stainless steel and aluminum panels are available for most sizes. A441WFSSLP, A4481WFSSLP, A4601WFSSALP enclosure backs have internal stiffeners. A48481WFSSLP back is 1 gauge. Y SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

48 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories EQUIPMENT PROTECTION PH FAX pentairprotect.com 177

49 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories REPLACEMENT DOOR WITH 3-POINT LATCH, TYPE 4X FINISH Door has a smooth #4 brushed finish on the exterior. The Type 316L stainless steel handle is electropolished. MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SW3, A4SY Standard Product Catalog Number Material Fits (in.) Z408SS3PT 304 A = 4.00, B = 0.00 Z408SS63PT 316L A = 4.00, B = 0.00 Z448SS3PT 304 A = 4.00, B = 4.00 Z448SS63PT 316L A = 4.00, B = 4.00 Z3048SS3PT 304 A = 30.00, B = 4.00 Z3048SS63PT 316L A = 30.00, B = 4.00 Z3648SS3PT 304 A = 36.00, B = 4.00 Z3648SS63PT 316L A = 36.00, B = 4.00 Z36308SS3PT 304 A = 36.00, B = Z36308SS63PT 316L A = 36.00, B = Z36368SS3PT 304 A = 36.00, B = Z36368SS63PT 316L A = 36.00, B = Z48368SS3PT 304 A = 48.00, B = Z48368SS63PT 316L A = 48.00, B = Z60368SS3PT 304 A = 60.00, B = Z60368SS63PT 316L A = 60.00, B = INDUSTRY StanDARDS Maintains NEMA Type 4X rating when properly installed on Hoffman SSLP clamp cover or SSLP3PT stainless steel wall-mount enclosures. APPliCatiON Replacement door for SSLP and SSLP3PT style enclosures. Maintains NEMA Type 4X rating and converts clamp covers to a 3-point latch. Replacement door is ideal for corrosive enclosure installations that require frequent access and the security of a POWerGLIDE padlocking handle. SPECIFICatiONS 14 gauge Type 304 or Type 316L stainless steel material Seamless foam-in-place gasket type 316L stainless steel POWerGLIDE handle internal 3-point latching hardware installed Data pocket is high-impact thermoplastic Hinge halves and stainless steel hinge pin Bonding provision 178 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

50 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 179

51 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories PainteD WHite WitH 3-POint LATCH, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3R, 4, 4X, 1, 13 iec 6059, IP66 Meets NEMA Type 3RX requirements APPLICATION These single-door stainless steel enclosures provide industryleading protection for housing electrical components and controls in outdoor or corrosive environments. White polyester powder reduces absorption of solar radiation, which keeps internal components cooler. Hoffman s exclusive Type 316L stainless steel small POWerGLIDE padlocking handle and internal 3-point latching combine ease of access with security. SPECIFICatiONS 14 gauge Type 304 stainless steel bodies and doors Seams continuously welded and ground smooth type 4-rated gasket 90-degree external formed flange on top of body opening type 316L stainless steel padlocking POWerGLIDE Handle and 3-point latching Door removed by pulling stainless steel continuous hinge pin Data pocket is high-impact thermoplastic collar studs provided for mounting optional panels FiniSH Enclosures have white polyester powder paint finish inside and out. Handle is electropolished. ACCESSORieS See also Accessories. PAneLite Enclosure Lights Overview Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Junction Box and Wall-Mount Enclosure Swing Out Panel Kit Steel and Stainless Steel Window Kits Homit Vent Drains, Type 4X Homit Thermoelectric Dehumidifier MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SW3 Standard Product Catalog Number AxBxC F Steel Panel Conductive Panel Stainless Steel Panel Panel Size D x E A4H408SSLP3PTW 4.00 x 4.00 x 8.00 A4P4 A4P4G A4P4SS x x 610 x x 533 A30H408SSLP3PTW x 4.00 x 8.00 A30P4 A30P4G A30P4SS x 1.00 x 610 x x 533 A4H010SSLP3PTW 4.00 x 0.00 x A4P0 A4P0G A4P0SS x x 508 x x 43 A4H41SSLP3PTW 4.00 x 4.00 x 1.00 A4P4 A4P4G A4P4SS x x 610 x x 533 A36H301SSLP3PTW x x 1.00 A36P30 A36P30G A36P30SS6 3 x x x x 686 A36H361SSLP3PTW x x 1.00 A36P36 A36P36G A36P36SS6 3 x x 914 x x 838 A4H361SSLP3PTW 4.00 x x 1.00 A4P36 A4P36G A4P36SS x x 914 x x 838 A48H361SSLP3PTW x x 1.00 A48P36 A48P36G A48P36SS x x 914 x x 838 A60H361SSLP3PTW x x 1.00 A60P36 A60P36G A60P36SS x x 914 x x 838 A48H3616SSLP3PTW x x A48P36 A48P36G A48P36SS x x 914 x x 838 Purchase panels separately. Optional stainless steel, composite and aluminum panels are available for most sizes. Panels have a formed flange along any side longer than 1.00 in. (533 mm). Panel A4P0 has a flange on all four sides. Data Pocket Small Large Small Small Large Large Large Large Large Large 180 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

52 Industrial Automation Supply - Tel: Wall-Mount EnclOSures Wall-Mount Enclosures and Accessories 35 Temperature Rise Example Internal Enclosure Temp erature above Outsid e Ambient 30 Internal Temperature F Aluminum ANSI 61 Stainless RAL 7035 Black Whit e Fiberglass 5 0 7//00 11 :0 0 AM 7//00 1:0 0 PM 7//00 1:00 PM 7//0 :00 PM Date/Time EQUIPMENT PROTECTION PH FAX pentairprotect.com 181

53 Industrial Automation Supply - Tel: WateRSHED Wall-Mount EnclOSures and AcceSSORies WatersHED Wall-Mount Enclosures and Accessories WATERSHED WALL-MOUNT ENCLOSURES AND ACCESSORIES WATERSHED WALL-MOUNT ENCLOSURES AND ACCESSORIES HOFFMan WateRSHED, TYPE 4X INDUSTRY StanDARDS Mounting brackets required to meet UL/cUL external mounting requirement. UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NSF 169 nema/eemac Type 4, 4X, 1 iec 6059, IP66 APPliCatiON Specifically designed for use in sanitary washdown production environments, particularly food and beverage manufacturing. Hoffman WAterSHED Enclosures feature a sloped top, sloped door edges, bullet-style hinges and additional unique features that facilitate washdown runoff. SPECIFICATIONS manufactured from 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth Smooth Type 304 stainless steel lift-off bullet-style hinges Hinges are shielded by door Hinged side of door has provisions to allow direct flushing of hinge area 0-degree sloped top facilitates runoff of water and cleaning solutions and prohibits the placement of objects on the top of the enclosure 170-degree door opening Door edges are sloped 0-degrees at top and bottom edges to facilitate runoff Slanted flange trough collar prohibits pooling of fluids along the top edge of the enclosure opening Stainless steel quarter-turn latches furnished with flush slotted insert Seamless foam-in-place gasket Self-grounding latch system with double seal Bonding provision on door; grounding stud on body Panel studs fit optional NEMA style panels mounting holes in back of body for direct mounting, optional stand-off kit or mounting bracket kit Furnished hardware kit consists of panel mounting nuts, grounding hardware and sealing washers for wall-mounting holes FiniSH External surfaces have a #4 brushed finish. ACCESSORieS See also Accessories. Mounting Bracket Kit Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Stand-Off Kit Padlocking Handle Kit Padlocking Latch Kit H OMIT TM Vent Drains, Type 4X H OMIT TM Thermoelectric Dehumidifier BULLETIN: WS1 18 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

54 Industrial Automation Supply - Tel: WateRSHED Wall-Mount EnclOSures and AcceSSORies WatersHED Wall-Mount Enclosures and Accessories Standard Product Catalog Number AxBxC Panel Conductive Panel A1 WS16108SS x 1.00 x 8.00 A16P1 A16P1G x 305 x WS161608SS x x 8.00 A16P16 A16P16G x 406 x WS01608SS 0.00 x x 8.00 A0P16 A0P16G x 406 x WS0008SS 0.00 x 0.00 x 8.00 A0P0 A0P0G x 508 x WS4008SS 4.00 x 0.00 x 8.00 A4P0 A4P0G x 508 x WS4408SS 4.00 x 4.00 x 8.00 A4P4 A4P4G x 610 x WS30408SS x 4.00 x 8.00 A30P4 A30P4G x 610 x WS303008SS x x 8.00 A30P30 A30P30G x x WS363008SS x x 8.00 A36P30 A36P30G x x WS0161SS 0.00 x x 1.00 A0P16 A0P16G x 406 x WS001SS 0.00 x 0.00 x 1.00 A0P0 A0P0G x 508 x WS441SS 4.00 x 4.00 x 1.00 A4P4 A4P4G x 610 x WS3041SS x 4.00 x 1.00 A30P4 A30P4G x 610 x WS36301SS x x 1.00 A36P30 A36P30G x x WS36361SS x x 1.00 A36P36 A36P36G x 914 x WS363016SS x x A36P30 A36P x x WS483616SS x x A48P36 A48P36G x 914 x WS603616SS x x A60P36 A60P36G x 914 x Purchase panels separately. Optional stainless steel, conductive or aluminum panels are available. WS603616SS back is 10 gauge stainless steel. A G H Latch Qty EQUIPMENT PROTECTION PH FAX pentairprotect.com 183

55 Industrial Automation Supply - Tel: WateRSHED Wall-Mount EnclOSures and AcceSSORies WatersHED Wall-Mount Enclosures and Accessories MOUNTING BRACKET KIT Type 304 stainless steel brackets are field-installable. Brackets maintain Type 4X rating. All hardware is included. Four brackets per kit. Top brackets must be mounted to the sides of enclosure. BULLETIN: A80 Catalog Number Description CMFKSS Type 304 stainless steel mounting bracket kit STAND-OFF KIT Stand-offs provide space between wall-mount enclosure and wall for better washdown accessibility. Maintains Type 4X rating. Sealing washers included. Four stand-offs per kit. BULLETIN: WSY Catalog Number C (in.) C (mm) WSSOK1SS WSSOKSS WSSOK4SS WSSOK6SS PADLOCKING HANDLE KIT Type 304 stainless steel padlocking handle for use on Hoffman WAterSHED Wall-Mount Enclosures. Maintains Type 4X rating. BULLETIN: WSY Catalog Number WSHPL Description Stainless Steel Padlocking Handle PADLOCKING LATCH KIT Type 304 stainless steel padlocking latch for use on Hoffman WAterSHED Wall-Mount Enclosures. Maintains Type 4X rating. BULLETIN: WSY Catalog Number WSLPL Description Padlocking Latch Kit 184 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

56 Industrial Automation Supply - Tel: WateRSHED Wall-Mount EnclOSures and AcceSSORies WatersHED Wall-Mount Enclosures and Accessories Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 185

57 Industrial Automation Supply - Tel: ConSOles and AcceSSORies Consoles and Accessories CONSOLES AND ACCESSORIES CONSOLES AND ACCESSORIES CONCEPT CONSOLE, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA Type 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 Meets NEMA Type 3RX requirements APPLICATION Sloped CONCEPT Consoles provide a convenient surface for mounting and monitoring components. Ergonomically designed so users can sit or stand while working, consoles feature a large internal capacity for mounting components and controls. SPECIFICatiONS 14 gauge Type 304 stainless steel ergonomically designed for sitting or standing operation Solid bottom corner-formed doors external-formed 90-degree body flange 0-degree sloped-top cover for in. (965-mm) tall console or 30-degree top cover for in. (119-mm) console Quarter-turn stainless steel latches hold top cover securely closed Door props hold top cover open at 90-degrees integral water-shedding trough collar studs for optional back panel optional side panels (mounted to collar studs) expand equipment mounting space tool-to-open 3-point latch on front access door; door is removable and reversible; 170-degree full-access opening Seamless foam-in-place gasket Bonding provision on door; grounding stud on body Provision for data pocket on lower front door easy-to-remove clip-style hinge pins FiniSH Doors and body have smooth #4 brushed finish. ACCESSORieS See also Accessories. Caster Kit Side Panels MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: C1S Standard Product Catalog Number AxBxC CFC38416SS x 4.00 x x 610 x 381 CFC383616SS x x x 914 x 381 CFC4843SS x 4.00 x x 610 x 457 CFC48363SS x x x 914 x 457 Order Back Panel and Data Pocket separately. Back Panel Conductive Panel Back Panel Height x Width CP364 CP364G 34.0 x x 564 CP3636 CP3636G 34.0 x x 869 CP44 CP44G 40.0 x x 564 CP436 CP436G 40.0 x x 869 F P Q R S T U W V 0º º º º Data Pocket Small Large Large Large 186 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

58 Industrial Automation Supply - Tel: ConSOles and AcceSSORies Consoles and Accessories CASteR Kit Order two swivel caster kits or one swivel caster kit plus one stationary caster kit. Height = 3.7 in. (94 mm) Wheel diameter = in. ( mm) Load rating each = 10 lb. (95 kg) BULLETIN: C1 Catalog Number Description AC4M6ST Caster kit, stationary ( casters per kit) AC4M6SV Caster lit, swivel ( casters per kit) CCPK18 Caster plate kit, 18 in., ( plates per kit) Order two swivel caster kits or one swivel caster kit plus one stationary caster kit. SIDE PANELS One panel per kit. Two kits required if a panel is needed on each side. BULLETIN: C1 D Catalog Number CPC CPC E G EQUIPMENT PROTECTION PH FAX pentairprotect.com 187

59 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures FLOOR-MOUNT AND FREE-STAND ENCLOSURES FLOOR-MOUNT AND FREE-STAND ENCLOSURES TWO-DOOR WitH 3-POint LATCHES, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA Type 3, 3R, 4, 4X, 1, 13 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON These two-door enclosures provide industry-leading protection for large components or complex mounting configurations in highlycorrosive environments. Three-point latching with the Hoffman POWerGLIDE padlocking handles and a foam-in-place gasket combine convenience with security. They are well-suited for use in petrochemical plants; pulp and paper processing; water treatment facilities; and food, pharmaceutical and packaging applications. SPECIFICATIONS manufactured from 1 gauge Type 304 or 316L stainless steel Backs are 10 or 1 gauge stainless steel with x-form stiffeners Seams continuously welded and ground smooth; no holes or knockouts removable centerpost for easy panel installation collar studs provided for mounting optional panels Panel supports included Heavy-duty lifting eyes are Type 316L stainless steel Heavy-duty 3-point latching mechanism operated by Type 316L stainless steel POWerGLIDE padlocking handles Body flange trough collar excludes liquids and contaminants Heavy-duty stainless steel continuous hinges support each door Bonding provision on doors; grounding studs on body Accessory mounting channel provided in enclosure top Data pocket is high-impact thermoplastic 1-in. (305-mm) removable floor stands are bolted to enclosure Seamless foam-in-place one-piece gasket provides oil-tight and dust-tight seal against contaminants external hardware manufactured of Type 316 stainless steel FiniSH Enclosures are unpainted. Front, sides, top and back have smooth #4 brushed finish. Optional mild steel panels are painted white. Optional conductive panels are available. ACCESSORieS See also Accessosries. Industrial Corrosion Inhibitors Electric Heater Electrical Interlocks PAneLite Enclosure Lights Overview Panel Support Kit MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4S3 Standard Product Catalog Number AxBxC in. AxBxC mm Stainless Steel Type Panel Conductive Panel Panel Size D x E (in.) Panel Size D x E (mm) A6H481SSLP3PT 6.06 x x x 11 x A60P48 A60P48G x x 1118 A6H481SS6LP3PT 6.06 x x x 11 x L A60P48 A60P48G x x 1118 A6H601SSLP3PT 6.06 x x x 156 x A60P60 A60P60G x x 14 A6H601SS6LP3PT 6.06 x x x 156 x L A60P60 A60P60G x x 14 A74H601SSLP3PT x x x 156 x A7P60 A7P60G x x 14 A74H601SS6LP3PT x x x 156 x L A7P60 A7P60G x x 14 A74H71SSLP3PT x 7.06 x x 1830 x A7P7 A7P7G x x 177 A74H71SS6LP3PT x 7.06 x x 1830 x L A7P7 A7P7G x x 177 A6H4818SSLP3PT 6.06 x x x 11 x A60P48 A60P48G x x 1118 A6H4818SS6LP3PT 6.06 x x x 11 x L A60P48 A60P48G x x 1118 A6H6018SSLP3PT 6.06 x x x 156 x A60P60 A60P60G x x 1118 A6H6018SS6LP3PT 6.06 x x x 156 x L A60P60 A60P60G x x 1118 A74H6018SSLP3PT x x x 156 x A7P60 A7P60G x x 14 A74H6018SS6LP3PT x x x 156 x L A7P60 A7P60G x x 14 A74H718SSLP3PT x 7.06 x x 1830 x A7P7 A7P7G x x 177 A74H718SS6LP3PT x 7.06 x x 1830 x L A7P7 A7P7G x x 177 A74H74SSLP3PT x 7.06 x x 1830 x A7P7 A7P7G x x 177 A74H74SS6LP3PT x 7.06 x x 1830 x L A7P7 A7P7G x x 177 Purchase panels separately. 188 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

60 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 189

61 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TWO-DOOR WitH FLOOR-StanDS, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA Type 3, 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON This two-door enclosure provides industry-leading protection for systems incorporating large components or complex mounting configurations in highly corrosive environments. It is typically used in food processing plants, pharmaceutical manufacturing facilities, petrochemical plants, pulp and paper processing and water treatment facilities. SPECIFICATIONS 1 gauge Type 304 or 316L stainless steel Seams continuously welded and ground smooth; no holes or knockouts Backs are 10 or 1 gauge stainless steel with x-form stiffeners removable centerpost for easy panel installation Panel supports Heavy-duty lifting eyes are Type 316 stainless steel Stainless steel screws and clamps on three sides of each door assure water-tight seal rolled lip around three sides of door and along top of enclosure opening excludes liquids and contaminants Heavy-gauge stainless steel continuous hinge Data pocket is high-impact thermoplastic 1-in. (305-mm) floor stands are welded to enclosure Hasp and staple for padlocking Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants collar studs provided for mounting optional panels external hardware manufactured of Type 316 stainless steel Bonding provision on doors; gounding studs on body Accessory mounting channel provided in enclosure top type 316L stainless steel lifting eyes FiniSH Enclosures are unpainted. Front, sides, top and back have smooth #4 brushed finish. Optional mild steel panels are painted white. Optional conductive panels are available. ACCESSORieS See also Accessories. Electric Heater PAneLite Enclosure Lights Overview Panel Support Kit Steel and Stainless Steel Window Kits MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SL Standard Product Catalog Number AxBxC Stainless Steel Type Panel Conductive Panel Panel Size D x E A6H481SSLP 6.06 x x A60P48 A60P48G x x 11 x x 1118 A6H481SS6LP 6.06 x x L A60P48 A60P48G x x 11 x x 1118 A6H601SSLP 6.06 x x A60P60 A60P60G x x 156 x x 14 A6H601SS6LP 6.06 x x L A60P60 A60P60G x x 156 x x 14 A74H601SSLP x x A7P60 A7P60G x x 156 x x 14 A74H601SS6LP x x L A7P60 A7P60G x x 156 x x 14 A74H71SSLP x 7.06 x A7P7 A7P7G x x 1830 x x 177 A74H71SS6LP x 7.06 x L A7P7 A7P7G x x 1830 x x 177 A74H74SSLP x 7.06 x A7P7 A7P7G x x 1830 x x 177 A74H74SS6LP x 7.06 x L A7P7 A7P7G x x 1830 x x 177 Purchase panels separately. A74H71SSLP, A74H71SS6LP, A74H74SSLP and A74H74SS6LP have 10 gauge back. Number of Clamps SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

62 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 191

63 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures GeneRal PURPOSE TWO-DOOR WitH QuaRteR-tuRN LATCHES AND FLOOR StanDS, TYPE 4X SPECIFICATIONS 14 gauge doors and 1 gauge body from Type 304 stainless steel Seams continuously welded and ground smooth Flange trough collar on all four sides of door openings Seamless foam-in-place one-piece gasket provides water-, oiland dust-tight seal against contaminants Black die-cast quarter-turn latches with slotted insert provided on three sides of each door concealed hinges provide 180-degree door opening and allow easy door removal and cleaning of hinge area Bolt-on 1-in.-high stainless steel floor stands Heavy-duty Type 316L stainless steel lifting eyes collar studs on inside of enclosure back for mounting optional panels removable centerpost for easy panel installation Bonding provisions on doors; grounding studs on body Data pocket is high-impact plastic attached with pressuresensitive adhesive no interior stiffeners to obstruct component mounting Accessory mounting channel provided in enclosure top INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC: Type 3R, 4, 4X, 1 Number E61997 iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON This two-door stainless steel enclosure with quarter-turn latches is designed to house electronic controls and components. It provides protection from noncorrosive or mildly corrosive elements in both indoor and outdoor environments. Typical applications are in the food and beverage, packaging, water, petroleum and chemical processing industries. FiniSH Stainless steel enclosures are unpainted. External surfaces of front, sides, top and bottom have a #4 finish. Interior welds are not finished. Optional mild steel panels are painted white. Optional conductive panels are available. ACCESSORieS See also Accessories. Electric Heater PAneLite Enclosure Lights Overview Panel Support Kit Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Steel and Stainless Steel Window Kits MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4S Standard Product Catalog Number AxBxC Panel Conductive Panel Panel Size D x E A60H481SSLPQT x x 1.06 A60P48 A60P48G x x 11 x x 1118 A60H601SSLPQT x x 1.06 A60P60 A60P60G x x 156 x x 14 A7H601SSLPQT 7.06 x x 1.06 A7P60 A7P60G x x 156 x x 14 A7H71SSLPQT 7.06 x 7.06 x 1.06 A7P7 A7P7G x x 1830 x x 177 A60H4818SSLPQT x x A60P48 A60P48G x x 11 x x 1118 A60H6018SSLPQT x x A60P60 A60P60G x x 156 x x 14 A7H6018SSLPQT 7.06 x x A7P60 A7P60G x x 156 x x 14 A7H718SSLPQT 7.06 x 7.06 x A7P7 A7P7G x x 1830 x x 177 A7H74SSLPQT 7.06 x 7.06 x 4.06 A7P7 A7P7G x x 1830 x x 177 Purchase panels separately. Number of Latches SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

64 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 193

65 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures GeneRal PURPOSE SinGle-DOOR FRee-StanD WitH QuaRteR-tuRN LATCHES, TYPE 4X INDUSTRY STANDARDS UL508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No. 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC: Type 3R, 4, 4X, 1 iec 6059, IP66 Meets NEMA Type 3RX APPliCatiON This single-door stainless steel enclosure with quarter-turn latches is designed to house electronic controls and components. It provides protection from non-corrosive or mildly corrosive elements in both indoor and outdoor environments. Typical applications are in the pharmaceutical, food and beverage, packaging, water, petroleum and chemical processing industries. SPECIFICatiONS type 304 Stainless Steel 14 gauge doors and body, and 14 or 1 gauge back Seams continuously welded and ground smooth Flange trough collar on all four sides of door openings Seamless foam-in-place one-piece gasket provides water-, oiland dust-tight seal against contaminants Black die-cast quarter-turn latches with slotted insert provided on three sides of door concealed stainless steel hinges provide 180-degree door opening and allow easy door removal and cleaning of hinge area Heavy-duty Type 316L stainless steel lifting eyes internal accessory mounting channels welded horizontally to sides at top, bottom and center High-impact plastic Data Pocket kit, attached with pressuresensitive adhesive, is included with enclosure Bonding provision on door; grounding stud on body Accessory mounting channel provided in enclosure top FiniSH Stainless steel enclosures are unpainted. External surfaces of front, sides, top and bottom have a #4 finish. Interior welds are not finished. Optional mild steel back panels are painted white. Optional conductive back panels are available. ACCESSORieS See also Accessories Swing Out Panels Back Panels Side Mount Panels Rack Mounting Angles Stainless Steel Window Kits MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4S Standard Product Catalog Number AxBxC Panel Conductive Panel Panel Size D x E A7HS418SSLPQT 7.06 x 4.06 x x 611 x 459 A7P4F1 A7P4F1G x x 508 A7HS304SSLPQT 7.06 x x x 4 x 611 A7P30F1 A7P30F1G x x 661 A7HS364SSLPQT 7.06 x x x 916 x 611 A7P36F1 A7P36F1G x 154 x SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

66 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 195

67 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TWO-DOOR WitH 3-POint LATCHES AND FLOOR-StanDS, TYPE 1 SPECIFICATIONS manufactured from 1 or 14 gauge Type 304 stainless steel Seams continuously welded and ground smooth; no holes or knockouts Strong, rigid construction with body stiffeners Gasketed overlapping doors eliminate need for centerpost Plated steel 3-point latching mechanism and key-locking handle Latch rods have rollers for easier door-closing Heavy-gauge continuous hinges support each door Data pocket, provided on door with 3-point latches, is high-impact thermoplastic 1-in. (305-mm) floor stands are welded to enclosure Heavy-duty lifting eyes are Type 316 stainless steel Panel supports collar studs for mounting optional panel Bonding provision on doors; grounding studs on body Accessory mounting channel in top of enclosure INDUSTRY StanDARDS UL 508A Listed; Type 1; File No. E61997 cul Listed per CSA C. No 94; Type 1; File No. E61997 NEMA/EEMAC Type 1 CSA File No. 4186: Type 1 iec 6059, IP55 APPliCatiON Designed to house systems incorporating large components or complex mounting configurations. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. FiniSH Enclosures are unpainted. Front, sides, top and back have smooth #4 brushed finished. Optional mild steel panels are painted white. Optional conductive panels are available. ACCESSORieS See also Accessories. Drip Shield Kit for Type 1 Enclosures Enclosure Stabilizers Center Panel Supports Panels for Type 3R, 4, 4X, 1 and 13 Enclosures MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A1S Standard Product Catalog Number AxBxC in. AxBxC mm Gauge Panel Galvanized Panel Panel Gauge Panel Size D x E (in.) Panel Size D x E (mm) Stiffener (Body) A54408SSLP x 4.00 x x 1067 x A54P4 A54P4G x x A604808SSLP x x x 11 x 05 1 A60P48 A60P48G x x (X-form) A604810SSLP x x x 11 x 56 1 A60P48 A60P48G x x (X-form) A606010SSLP x x x 156 x 56 1 A60P60 A60P60G x x 14 1 (X-form) A76010USSLP 7.06 x x x 156 x 56 1 A7P60 A7P60G x x 14 1 (X-form) A7710USSLP 7.06 x 7.06 x x 1830 x 56 1 A7P7 A7P7G x x (X-form) A60481SSLP x x x 11 x A60P48 A60P48G x x (X-form) A60601SSLP x x x 156 x A60P60 A60P60G x x 14 1 (X-form) A7601USSLP 7.06 x x x 156 x A7P60 A7P60G x x 14 1 (X-form) A771USSLP 7.06 x 7.06 x x 1830 x A7P7 A7P7G x x (X-form) A604816SSLP x x x 11 x A60P48 A60P48G x x (X-form) A606016SSLP x x x 156 x A60P60 A60P60G x x 14 1 (X-form) A76016USSLP 7.06 x x x 156 x A7P60 A7P60G x x 14 1 (X-form) A7716USSLP 7.06 x 7.06 x x 1830 x A7P7 A7P7G x x (X-form) A60480SSLP x x x 11 x A60P48 A60P48G x x (X-form) A7600USSLP 7.06 x x x 156 x A7P60 A7P60G x x 14 1 (X-form) A770USSLP 7.06 x 7.06 x x 1830 x A7P7 A7P7G x x (X-form) A60484SSLP x x x 11 x A60P48 A60P48G x x (X-form) A60604SSLP x x x 156 x A60P60 A60P60G x x 14 1 (X-form) A7604USSLP 7.06 x x x 156 x A7P60 A7P60G x x 14 1 (X-form) A774USSLP 7.06 x 7.06 x x 1830 x A7P7 A7P7G x x (X-form) Purchase panels separately. 196 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

68 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 197

69 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures FRee-StanD, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA Type 3, 3R, 4, 4X, 1, 13 CSA File No. 4186: Type 4, 4X, 1 E.I.A. RS-310-D iec 6059, IP66 Meets NEMA Type 3RX requirements APPLICATION This single-door enclosure provides industry-leading protection for systems incorporating large components or complex mounting configurations in highly corrosive environments. The addition of 19-in. rack-mounting accessories makes these enclosures ideal for providing rugged protection for sensitive rack-mounted components in harsh industrial environments. The enclosure is typically used in food-processing plants, pharmaceutical manufacturing facilities, petrochemical plants and waste-water treatment facilities. SPECIFICatiONS 1 gauge Type 304 or 316L stainless steel Seams continuously welded and ground smooth; no holes or knockouts mounting channels welded horizontally to interior body sides at top, bottom and center Panels and rack mounting angles can be mounted anywhere along channels rolled lip around three sides of door and along top of enclosure opening excludes liquids and contaminants Stainless steel door clamps on three sides of door assure watertight seal Heavy-gauge stainless steel continuous hinge Stainless steel hinge pin Stainless steel hasp and staple provided for padlocking Data pocket is high-impact thermoplastic Heavy-duty lifting eyes are Type 316L stainless steel oil-resistant door gasket Bonding provision on door; grounding stud on body Accessory mounting channel provided in enclosure top FiniSH Enclosures are unpainted. Front, sides, top and back have smooth #4 brushed finish. Optional steel panels, swing-out panels, sidemounted panels, rack-mounting frames, heavy-duty panel supports and center panel supports are painted white. Optional full, half and side-mounted conductive panels are available. ACCESSORieS See also Accessories. Caster Kit Clamping Nut Package Drip Shield Kit for Type 1 Enclosures PAneLite Enclosure Lights Overview MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A4SL Standard Products Catalog Number AxBxC A7H518SSFS 7.06 x 5.06 x x 637 x 459 A7H518SS6FS 7.06 x 5.06 x x 637 x 459 A7H314SSFS 7.06 x x x 789 x 611 A7H314SS6FS 7.06 x x x 789 x 611 A7H374SSFS 7.06 x x x 941 x 611 A7H374SS6FS 7.06 x x x 941 x 611 Purchase panels and accessories separately. Stainless X Steel Type L L L G SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

70 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 199

71 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures FRee-StanD SinGle AND Dual ACCESS WitH 3-POint LATCHES, TYPE 4X ideal for providing rugged protection for sensitive rack-mounted components in harsh industrial environments. These enclosures are used extensively in automotive, pulp and paper, wood products, textile and similar industries. INDUSTRY StanDARDS UL 508A Listed; Type 3R, 4, 4X, 1; File No. E61997 cul Listed per CSA C. No 94; Type 3R, 4, 4X, 1; File No. E61997 NEMA/eemAC Type 3, 3R, 4, 4X, 1, 13 E.I.A. RS-310-D iec 6059, IP66 Meets NEMA Type 3RX requirements APPliCatiON Designed to house systems incorporating large components or complex mounting configurations. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. The addition of 19-in. rack-mounting accessories makes these enclosures Four styles are available to provide maximum flexibility: 1. one-door Single-Access Enclosures (single door on front). One-Door Dual-Access Enclosures (single door on front and rear) 3. Two-Door Single-Access Enclosures (doors close on a removeable centerpost) 4. Two-Door Dual-Access Enclosures (doors close on a removeable centerpost on front and rear) SPECIFICatiONS 1 gauge Type 304 stainless steel Seams continuously welded and ground smooth; no holes or knockouts two-door enclosures provided with a removeable centerpost for easy panel installation Heavy-duty lifting eyes are Type 316L stainless steel Heavy-duty three-point latching mechanism operated by Type 316L stainless steel POWerGLIDE padlocking handle Seemless foam-in-place gasket assures a water-tight and dusttight seal Body flange trough collar excludes liquids and contaminants Latch rods have rollers for easier door closing Heavy-gauge continuous hinges support each door High-impact thermoplastic data pocket provided with each enclosure mounting channels welded horizontally to interior body sides at top, bottom and center optional panels and rack mounting angles can be mounted anywhere along channels Bonding provision on door; grounding stud on body Accessory mounting channel provided in enclosure top FiniSH Enclosures are unpainted. Cover, sides, top and bottom have smooth #4 brushed finish. Optional steel panels, swing-out panels, sidemounted panels, rack-mounting frames, heavy-duty panel supports and center panel supports are white. Optional full, half and sidemounted conductive panels are available. ACCESSORieS See also Accessories. Caster Kit Clamping Nut Package Floor Stand Kit, Stainless Steel Center Panel Supports Panels for Free-Stand Type 4, 4X and 1 Single- and Dual-Access One-Door Enclosures with Mounting Channel Panels for Free-Stand Type 4, 4X and 1 Single- and Dual-Access Two-Door Enclosures with Mounting Channel MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A30S4 00 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

72 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Standard Product One-Door Single-Access Catalog Number AxBxC A60418SSFSN x 4.06 x x 611 x 459 A7418SSFSN x 4.06 x x 611 x 459 A73018SSFSN x x x 4 x 459 A73618SSFSN x x x 916 x 459 A9040SSFSN x 4.06 x x 611 x 510 A90360SSFSN x x x 916 x 510 A60364SSFSN x x x 916 x 611 A744SSFSN x 4.06 x x 611 x 611 A7304SSFSN x x x 4 x 611 A7364SSFSN x x x 916 x 611 A90364SSFSN x x x 916 x 611 A73630SSFSN x x x 916 x 4 A73636SSFSN x x x 916 x 916 A903636SSFSN x x x 916 x 916 Purchase panels and accessories separately. F G EQUIPMENT PROTECTION PH FAX pentairprotect.com 01

73 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Standard Product One-Door Dual-Access Catalog Number AxBxC A744SSFSDAN x 4.06 x x 611 x 611 A7304SSFSDAN x x x 4 x 611 A7364SSFSDAN x x x 916 x 611 A90364SSFSDAN x x x 916 x 611 A7430SSFSDAN x 4.06 x x 611 x 4 A7436SSFSDAN x 4.06 x x 611 x 916 A73636SSFSDAN x x x 916 x 916 A903636SSFSDAN x x x 916 x 916 Purchase panels and accessories separately. F G SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

74 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Standard Product Two-Door Single-Access Catalog Number AxBxC A604818SSFSDN x x x 11 x 459 A74818SSFSDN x x x 11 x 459 A76018SSFSDN x x x 156 x 459 A7718SSFSDN x 7.06 x x 1830 x 459 A90480SSFSDN x x x 11 x 510 A9070SSFSDN x 7.06 x x 1830 x 510 A7484SSFSDN x x x 11 x 611 A7604SSFSDN x x x 156 x 611 A774SSFSDN x 7.06 x x 1830 x 611 A9074SSFSDN x 7.06 x x 1830 x 611 A76036SSFSDN x x x 156 x 916 A90736SSFSDN x 7.06 x x 1830 x 916 Purchase panels and accessories separately. F G H J EQUIPMENT PROTECTION PH FAX pentairprotect.com 03

75 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Standard Product Two-Door Dual-Access Catalog Number AxBxC A7484SSFSDADN x x x 11 x 611 A7604SSFSDADN x x x 156 x 611 A774SSFSDADN x 7.06 x x 1830 x 611 A9074SSFSDADN x 7.06 x x 1830 x 611 A76036SSFSDADN x x x 156 x 916 Purchase panels and accessories separately. F G SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

76 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 05

77 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures FRee-StanD ACCESSORieS SeleCtiON GUIDE Single-Door Single-Access Enclosures Single-Door Dual-Access Enclosures A60418SSFS A7418SSFS A73018SSFS A73618SSFS A9040SSFS A90360SSFS A60364SSFS A744SSFS A7304SSFS A7364SSFS A90364SSFS A73630SSFS A73636SSFS A903636SSFS A744SSFSDA A7304SSFSDA A7364SSFSDA A90364SSFSDA A7430SSFSDA A746SSFSDA A73636SSFSDA A903636SSFSDA PANELS Catalog Number Steel Conductive Description Panel Size A60P4F1 A60P4F1G Full Panel x 0.00 (119 x 508) a a a a a a A60P4F A60P4FG Half Panel 4.88 x 0.00 (63 x 508) a a a a a a A7P4F1 A7P4F1G Full Panel x 0.00 (154 x 508) a A7P4F A7P4FG Half Panel x 0.00 (784 x 508) a a A90P4F1 A90P4F1G Full Panel x 0.00 (1981 x 508) A90P4F A90P4FG Half Panel x 0.00 (1013 x 508) a a a a a a A7P30F1 A7P30F1G Full Panel x 6.00 (154 x 660) A7P30F A7P30FG Half Panel x 6.00 (784 x 660) A60P36F1 A60P36F1G Full Panel x (119 x 813) a a a a a a a a a a A60P36F A60P36FG Half Panel 4.88 x (63 x 813) a a a a a a a a a a A7P36F1 A7P36F1G Full Panel x (154 x 813) a a a A7P36F A7P36FG Half Panel x (784 x 813) a a a a a a A90P36F1 A90P36F1G Full Panel x (1981 x 813) A90P36F A90P36FG Half Panel x (1013 x 813) a a a a a a a SwINg-OUT PANELS Catalog Number Description Panel Size A7SP4F3 Full Panel x (154 x 478) A7SP4F4 Half Panel c x (784 x 478) A7SP30F3 Full Panel x 4.81 (154 x 630) A7SP30F4 Half Panel c x 4.81 (784 x 630) A7SP36F3 Full Panel x (154 x 783) A7SP36F4 Half Panel c x (784 x 783) A90SP36F3 Full Panel x (1981 x 783) A90SP36F4 Half Panel c x (1013 x 783) SIDE-MOUNT PANELS Catalog Number Steel Conductive Description Panel Size A60SMP14 A60SMP14G 14 Wide Panel (356) x (119 x 356) A7SMP14 A7SMP14G 14 Wide Panel (356) x (154 x 356) A90SMP14 A90SMP14G 14 Wide Panel (356) x (1981 x 356) A7SMP0 A7SMP0G 0 Wide Panel (508) x 0.00 (154 x 508) A90SMP0 A90SMP0G 0 Wide Panel (508) x 0.00 (1981 x 508) heavy DUTY PANEL SUPPORTS Catalog Number Description Panel Size A60FShDPS Full-Length 57.5 (1454) a A7FShDPS Panel 69.5 (1759) A90FShDPS Supports 87.5 (16) Millimeter dimensions are in ( ). a Requires heavy duty panel supports c Fits in top half or bottom half of enclosure 06 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

78 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Two-Door Single-Access Enclosures PANELS A604818SSFSD A74818SSFSD A76018SSFSD A7718SSFSD A90480SSFSD A9070SSFSD A7484SSFSD A7604SSFSD A774SSFSD A9074SSFSD A76036SSFSD A90736SSFSD Catalog Number Steel Conductive Description Panel Size A60P4F1 A60P4F1G Full Panel x 0.00 (119 x 508) b a,b a,b a,b A60P4F A60P4FG Half Panel 4.88 x 0.00 (63 x 508) b a,b a,b a,b A7P4F1 A7P4F1G Full Panel x 0.00 (154 x 508) b a,b b A7P4F A7P4FG Half Panel x 0.00 (784 x 508) a,b b a,b b A90P4F1 A90P4F1G Full Panel x 0.00 (1981 x 508) b A90P4F A90P4FG Half Panel x 0.00 (1013 x 508) a,b a,b b a,b A7P30F1 A7P30F1G Full Panel x 6.00 (154 x 660) b b b A7P30F A7P30FG Half Panel x 6.00 (784 x 660) b b b A60P36F1 A60P36F1G Full Panel x (119 x 813) a,b a,b a,b a,b a,b A60P36F A60P36FG Half Panel 4.88 x (63 x 813) a,b a,b a,b a,b a,b A7P36F1 A7P36F1G Full Panel x (154 x 813) b a,b b a,b a,b A7P36F A7P36FG Half Panel x (784 x 813) b a,b b a,b a,b A90P36F1 A90P36F1G Full Panel x (1981 x 813) b b b A90P36F A90P36FG Half Panel x (1013 x 813) a,b b a,b b b SwINg-OUT PANELS Catalog Number Description Panel Size A7SP4F3 Full Panel x (154 x 478) b b A7SP4F4 Half Panelc x (784 x 478) b b A7SP30F3 Full Panel x 4.81 (154 x 630) b b b A7SP30F4 Half Panelc x 4.81 (784 x 630) b b b A7SP36F3 Full Panel x (154 x 783) b b A7SP36F4 Half Panelc x (784 x 783) b b A90SP36F3 Full Panel x (1981 x 783) b b b A90SP36F4 Half Panelc x (1013 x 783) b b b SIDE-MOUNT PANELS Catalog Number Steel Conductive Description Panel Size A60SMP14 A60SMP14G 14 Wide Panel (356) x (119 x 356) d A7SMP14 A7SMP14G 14 Wide Panel (356) x (154 x 356) d d d A90SMP14 A90SMP14G 14 Wide Panel (356) x (1981 x 356) A7SMP0 A7SMP0G 0 Wide Panel (508) x 0.00 (154 x 508) d d d A90SMP0 A90SMP0G 0 Wide Panel (508) x 0.00 (1981 x 508) d heavy DUTY PANEL SUPPORTS Catalog Number Description Panel Size A60FShDPS Full-Length 57.5 (1454) b A7FShDPS Panel 69.5 (1759) b b b b b b b A90FShDPS Supports 87.5 (16) b b b b Millimeter dimensions are in ( ). a Requires heavy duty panel supports b Requires center panel supports c Fits in top half or bottom half of enclosure d Will not fit if other panels are also installed in same enclosure EQUIPMENT PROTECTION PH FAX pentairprotect.com 07

79 Industrial Automation Supply - Tel: Spec-0038 G STAINLESS STEEL FLOOR-MOUNT AND FREE-STAND ENCLOSURES FLOOR-MOUNT AND FREE-STAND ENCLOSURES FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Single-Door Single-Access Enclosures Single-Door Dual-Access Enclosures PANELS Catalog Number Steel Conductive Description Panel Size A60P48F1 A60P48F1G Full Panel x (119 x 1118) A7P48F1 A7P48F1G Full Panel x (154 x 1118) A7P48F A7P48FG Half Panel x (784 x 1118) A90P48F1 A90P48F1G Full Panel x (1981 x 1118) A90P48F A90P48FG Half Panel x (1013 x 1118) A7P60F1 A7P60F1G Full Panel x (154 x 14) A7P60F A7P60FG Half Panel x (784 x 14) A7P7F1 A7P7F1G Full Panel x (154 x 177) A7P7F A7P7FG Half Panel x (784 x 177) A90P7F1 A90P7F1G Full Panel x (1981 x 177) A90P7F A90P7FG Half Panel x (1013 x 177) CENTER PANEL SUPPORTS A60418SSFS A7418SSFS A73018SSFS A73618SSFS A9040SSFS A90360SSFS A60364SSFS A744SSFS A7304SSFS A7364SSFS A90364SSFS A73630SSFS A73636SSFS A903636SSFS A744SSFSDA A7304SSFSDA A7364SSFSDA A90364SSFSDA A7430SSFSDA A7436SSFSDA A73636SSFSDA A903636SSFSDA Catalog Number A60FSCPS A7FSCPS A90FSCPS Description Center Panel Support Center Panel Support Center Panel Support CLAMPINg NUTS Catalog Number Description APS140CN 1/4-0 Clamping Nut (Qty. 0) for Special Use APS51616CN 1/4-18 Clamping Nut (Qty. 0) for Special Use CASTERS Catalog Number Description Size DMCkC Set of 4 Casters 4 high x 3 diameter RACk MOUNTINg ANgLES L-STYLE (TYPE RP) FOR 19- AND 4-IN. EqUIPMENT Catalog Number Description For Rack Size No. Units d Angle Length A60RP4F5 Full-Length Angles 19 (483) (145) A60RP4F6 Half-Length Angles 19 (483) (677) A7RP4F5 Full-Length Angles 19 (483) (1556) A7RP4F6 Half-Length Angles 19 (483) (800) A90RP4F5 Full-Length Angles 19 (483) (000) A90RP4F6 Half-Length Angles 19 (483) (10) A7RP30F5 Full-Length Angles 4 (610) (1556) A7RP30F6 Half-Length Angles 4 (610) (800) Millimeter dimensions are in ( ). d Will not fit if other panels are also installed in same enclosure 08 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

80 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Two-Door Single-Access Enclosures PANELS A604818SSFSD A74818SSFSD A76018SSFSD A7718SSFSD A90480SSFSD A9070SSFSD A7484SSFSD A7604SSFSD A774SSFSD A9074SSFSD A76036SSFSD A90736SSFSD Catalog Number Steel Conductive Description Panel Size A60P48F1 A60P48F1G Full Panel x (119 x 1118) a a a A7P48F1 A7P48F1G Full Panel x (154 x 1118) a A7P48F A7P48FG Half Panel x (784 x 1118) a a A90P48F1 A90P48F1G Full Panel x (1981 x 1118) A90P48F A90P48FG Half Panel x (1013 x 1118) a a A7P60F1 A7P60F1G Full Panel x (154 x 14) A7P60F A7P60FG Half Panel x (784 x 14) A7P7F1 A7P7F1G Full Panel x (154 x 177) a a a A7P7F A7P7FG Half Panel x (784 x 177) a a a A90P7F1 A90P7F1G Full Panel x (1981 x 177) A90P7F A90P7FG Half Panel x (1013 x 177) a a CENTER PANEL SUPPORTS Catalog Number Description A60FSCPS Center Panel Support A7FSCPS Center Panel Support A90FSCPS Center Panel Support CLAMPINg NUTS Catalog Number Description APS140CN 1/4-0 Clamping Nut (Qty. 0) for Special Use APS51616CN 1/4-18 Clamping Nut (Qty. 0) for Special Use CASTERS Catalog Number Description Size DMCkC Set of 4 Casters 4 high x 3 diameter RACk MOUNTINg ANgLES L-STYLE (TYPE RP) FOR 19- AND 4-IN. EqUIPMENT For Catalog Number Description Rack Size No. Units d Angle Length A60RP4F5 Full-Length Angles 19 (483) (145) b b b b A60RP4F6 Half-Length Angles 19 (483) (677) b A7RP4F5 Full-Length Angles 19 (483) (1556) b b b A7RP4F6 Half-Length Angles 19 (483) (800) b b b A90RP4F5 Full-Length Angles 19 (483) (000) b A90RP4F6 Half-Length Angles 19 (483) (10) b b b b A7RP30F5 Full-Length Angles 4 (610) (1556) b b b A7RP30F6 Half-Length Angles 4 (610) (800) b b b Millimeter dimensions are in ( ). a Requires heavy duty panel supports b Requires center panel supports d Will not fit if other panels are also installed in same enclosure EQUIPMENT PROTECTION PH FAX pentairprotect.com 09

81 Industrial Automation Supply - Tel: Spec-0038 G STAINLESS STEEL FLOOR-MOUNT AND FREE-STAND ENCLOSURES FLOOR-MOUNT AND FREE-STAND ENCLOSURES FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Single-Door Single-Access Enclosures Single-Door Dual-Access Enclosures RACk MOUNTINg ANgLES U-STYLE (TYPE RA) FOR 19- AND 4-IN. EqUIPMENT A60418SSFS A7418SSFS A73018SSFS A73618SSFS A9040SSFS A90360SSFS A60364SSFS A744SSFS A7304SSFS A7364SSFS A90364SSFS A73630SSFS A73636SSFS A903636SSFS A744SSFSDA A7304SSFSDA A7364SSFSDA A90364SSFSDA A7430SSFSDA A7436SSFSDA A73636SSFSDA A903636SSFSDA Catalog Number Description For Rack Size No. Units d Angle Length A60rA19th Full-Length Angles 19 (483) (145) A7rA19th Full-Length Angles 19 (483) (1556) A90rA19th Full-Length Angles 19 (483) (000) A7rA4th Full-Length Angles 4 (610) (1556). CLIP NUT PACkAgE Catalog Number Description Size Fits An103 Clip Nut (Pkg of 0) #10-3 Zinc-Plated RA Type Mnt Angles 19-IN. SwINg-OUT RACk MOUNTINg FRAMES For Catalog Number Description Rack Size No. Units d Panel Space A730S0F19 Full Swing-Out Frame 19 (483) (1470) A736S0F19 Full Swing-Out Frame 19 (483) (1470) A9036S0F19 Full Swing-Out Frame 19 (483) (1915) Millimeter dimensions are in ( ). d 1 unit = 1.75 in. (44 mm) 10 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

82 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Two-Door Single-Access Enclosures RACk MOUNTINg ANgLES U-STYLE (TYPE RA) FOR 19- AND 4-IN. EqUIPMENT A604818SSFSD A74818SSFSD A76018SSFSD A7718SSFSD A90480SSFSD A9070SSFSD A7484SSFSD A7604SSFSD A774SSFSD A9074SSFSD A76036SSFSD A90736SSFSD Catalog Number Description For Rack Size No. Units d Angle Length A60rA19th Full-Length Angles 19 (483) (145) b b b b A7rA19th Full-Length Angles 19 (483) (1556) b b b A90rA19th Full-Length Angles 19 (483) (000) b A7rA4th Full-Length Angles 4 (610) (1556) b b b. CLIP NUT PACkAgE Catalog Number Description Size Fits An103 Clip Nut (Pkg of 0) #10-3 Zinc-Plated RA Type Mnt Angles 19-IN. SwINg-OUT RACk MOUNTINg FRAMES For Catalog Number Description Rack Size No. Units d Panel Space A730S0F19 Full Swing-Out Frame 19 (483) (1470) b b b A736S0F19 Full Swing-Out Frame 19 (483) (1470) b b A9036S0F19 Full Swing-Out Frame 19 (483) (1915) b b b Millimeter dimensions are in ( ). b Requires center panel support(s) for installation d 1 unit = 1.75 in. (44 mm) EQUIPMENT PROTECTION PH FAX pentairprotect.com 11

83 Industrial Automation Supply - Tel: Spec-0038 G STAINLESS STEEL FLOOR-MOUNT AND FREE-STAND ENCLOSURES FLOOR-MOUNT AND FREE-STAND ENCLOSURES FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Single-Door Single-Access Enclosures Single-Door Dual-Access Enclosures RACk MOUNTINg ANgLES U-STYLE (TYPE RA) FOR 19- AND 4-IN. EqUIPMENT A60418SSFS A7418SSFS A73018SSFS A73618SSFS A9040SSFS A90360SSFS A60364SSFS A744SSFS A7304SSFS A7364SSFS A90364SSFS A73630SSFS A73636SSFS A903636SSFS A744SSFSDA A7304SSFSDA A7364SSFSDA A90364SSFSDA A7430SSFSDA A7436SSFSDA A73636SSFSDA A903636SSFSDA Catalog Number Description For Rack Size No. Units d Angle Length A60rA19th Full-Length Angles 19 (483) (145) A7rA19th Full-Length Angles 19 (483) (1556) A90rA19th Full-Length Angles 19 (483) (000) A7rA4th Full-Length Angles 4 (610) (1556). CLIP NUT PACkAgE Catalog Number Description Size Fits An103 Clip Nut (Pkg of 0) #10-3 Zinc-Plated RA Type Mnt Angles 19-IN. SwINg-OUT RACk MOUNTINg FRAMES Catalog Number Description For Rack Size No. Units d Panel Space A730S0F19 Full Swing-Out Frame 19 (483) (1470) A736S0F19 Full Swing-Out Frame 19 (483) (1470) A9036S0F19 Full Swing-Out Frame 19 (483) (1915) writing SURFACES Catalog Number Description Fits Drawer A19wSdr Hinged Surface A19DRU, A19DR4U a a a dl9ws Hinged Surface DL39DR, DL79DR a a 19- AND 4-IN. RACk-MOUNTED ShELvES Catalog Number Description For Rack Size Number of Units d A19ShP6 Pull-Out Shelf 19 (483) a a a a dl9shp Pull-Out Shelf 4 (610) a a A19Sh6 Fixed Shelf 19 (483) 1 a a a a dl9sh Fixed Shelf 4 (610) 1 a a guides FOR RACk-MOUNTED ShELvES Catalog Number Description Number of Units d AG1u6 Chassis Guides () 1 a a a a a AG1u8 Chassis Guides () 1 a a Millimeter dimensions are in ( ). a Requires sets U-style (Type RA) rack mounting angles for installation d 1 unit = 1.75 in. (44 mm) 1 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

84 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures TYPE 1 FREE-STAND ENCLOSURES ACCESSORY SELECTION (SEE ACCESSORIES FOR DETAILS) Two-Door Single-Access Enclosures RACk MOUNTINg ANgLES U-STYLE (TYPE RA) FOR 19- AND 4-IN. EqUIPMENT A604818SSFSD A74818SSFSD A76018SSFSD A7718SSFSD A90480SSFSD A9070SSFSD A7484SSFSD A7604SSFSD A774SSFSD A9074SSFSD A76036SSFSD A90736SSFSD Catalog Number Description For Rack Size No. Units d Angle Length A60rA19th Full-Length Angles 19 (483) (145) b b b b A7rA19th Full-Length Angles 19 (483) (1556) b b b A90rA19th Full-Length Angles 19 (483) (000) b A7rA4th Full-Length Angles 4 (610) (1556) b b b CLIP NUT PACkAgE Catalog Number Description Size Fits An103 Clip Nut (Pkg of 0) #10-3 Zinc-Plated RA Type Mnt Angles 19-IN. SwINg-OUT RACk MOUNTINg FRAMES For Catalog Number Description Rack Size No. Units d Panel Space A730S0F19 Full Swing-Out Frame 19 (483) (1470) b b b A736S0F19 Full Swing-Out Frame 19 (483) (1470) b b A9036S0F19 Full Swing-Out Frame 19 (483) (1915) b b b writing SURFACES Catalog Number Description Fits Drawer A19wSdr Hinged Surface A19DRU, A19DR4U a dl9ws Hinged Surface DL39DR, DL79DR a a 19- AND 4-IN. RACk-MOUNTED ShELvES Catalog Number Description For Rack Size Number of Units d a19shp6 Pull-Out Shelf 19 (483) a dl9shp Pull-Out Shelf 4 (610) a a a19sh6 Fixed Shelf 19 (483) 1 a dl9sh Fixed Shelf 4 (610) 1 a a guides FOR RACk-MOUNTED ShELvES Catalog Number Description Number of Units d AG1u6 Chassis Guides () 1 a a a AG1u8 Chassis Guides () 1 a Millimeter dimensions are in ( ). a Requires sets U-style (Type RA) rack mounting angles for installation b Requires center panel support(s) for installation d 1 unit = 1.75 in. (44 mm) EQUIPMENT PROTECTION PH FAX pentairprotect.com 13

85 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures FRee-StanD, TYPE 1 INDUSTRY StanDARDS UL 508A Listed; Type 1; File No. E61997 cul Listed per CSA C. No 94; Type 1; File No. E61997 NEMA/EEMAC Type 1 E.I.A. RS-310-D CSA File No. 4186: Type 1 iec 6059, IP55 APPliCatiON Designed to house systems incorporating large components or complex mounting configurations. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. These enclosures are used in machine tool applications for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. The addition of 19-in. rack-mounting accessories makes these enclosures ideal for providing rugged protection for sensitive rack-mounted components in harsh industrial environments. These enclosures are used extensively in automotive, pulp and paper, wood products, textile and similar industries. SPECIFICATIONS 1 gauge Type 304 stainless steel Seams continuously welded and ground smooth; no holes or knockouts Stiffeners welded to back of enclosures maintain flatness and increase rigidity Heavy-duty lifting eyes are Type 316 stainless steel Plated steel 3-point latching and keylocking handle Latch rods have rollers for easier door closing Heavy-gauge continuous hinges support each door Data pocket, provided on door(s) with 3-point latches, is highimpact thermoplastic mounting channels welded horizontally to interior body sides at top, bottom and center optional panels and rack-mounting angles can be mounted anywhere along channels oil-resistant door gasket attached with oil-resistant adhesive and held in place with steel retaining strips Bonding provision on door; grounding studs on body Accessory mounting channel provided in enclosure top FiniSH Enclosures are unpainted. Cover, sides, top and bottom have smooth #4 brushed finish. Optional steel panels, swing-out panels, sidemounted panels, rack-mounting frames, heavy-duty panel supports and center panel supports are painted white. Optional full, half and side-mounted conductive panels are available. ACCESSORieS See also Accessories. Electrical Interlocks Floor Stand Kit, Stainless Steel Fluorescent Light Package Center Panel Supports Panels for Type 3R, 4, 4X, 1 and 13 Enclosures MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: A30S 14 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

86 Industrial Automation Supply - Tel: FlOOR-Mount and Free-Stand EnclOSures Floor-Mount and Free-Stand Enclosures Standard Product Catalog Number AxBxC A604818SSFSD x x x 11 x 47 A74818SSFSD 7.06 x x x 11 x 47 A7484SSFSD 7.06 x x x 11 x 611 A76018SSFSD 7.06 x x x 156 x 47 A7604SSFSD 7.06 x x x 156 x 611 A76036SSFSD 7.06 x x x 156 x 916 A7718SSFSD 7.06 x 7.06 x x 1830 x 47 A774SSFSD 7.06 x 7.06 x x 1830 x 611 A90480SSFSD x x x 11 x 510 A9070SSFSD x 7.06 x x 1830 x 510 A9074SSFSD x 7.06 x x 1830 x 611 A90736SSFSD x 7.06 x x 1830 x 916 Purchase panels and accessories separately. F G H J EQUIPMENT PROTECTION PH FAX pentairprotect.com 15

87 Industrial Automation Supply - Tel: HOFFMan WateRSHED Free-Stand EnclOSures and AcceSSORies HoFFman WatersHED Free-Stand HOFFMAN WATERSHED FREE-STAND ENCLOSURES AND ACCESSORIES HOFFMAN WATERSHED FREE-STAND WateRSHED FREE-StanD, TYPE 4X INDUSTRY StanDARDS UL 508A Listed; Type 4, 4X, 1; File Number E61997 cul Listed per CSA C. No 94; Type 4, 4X, 1; File Number E61997 NSF 169 nema/eemac Type 4, 4X, 1 iec 6059, IP66 APPliCatiON The Hoffman WAterSHED stainless steel free-stand enclosure, with its unique design and Type 4X rating, is a perfect fit for mounting electrical or high-tech electronic equipment in a variety of indoor and outdoor settings. Its unique features are specifically designed for use in sanitary washdown production environments like food, beverage, or pharmaceutical processing. However, these same features also are useful in petrochemical plants, pulp and paper facilities and waste-water treatment plants. SPECIFICatiONS manufactured from 1 gauge Type 304 stainless steel Seams continuously welded and ground smooth Smooth Type 304 stainless steel lift-off bullet-style hinges Hinges are shielded by cover edges Hinged side of cover has provisions to allow direct flushing of hinge area 0-degree sloped top facilitates runoff of water and cleaning solutions and prohibits the placement of objects on the top of the enclosure 170-degree door opening Door edges are sloped 0 degrees at top and bottom edges to facilitate runoff Slanted flange trough collar prohibits pooling of fluids along the top edge of the enclosure opening three-point latching operated by POWerGLIDE Type 316L padlocking stainless steel handles Seamless foam-in-place one-piece gasket provides oil-tight and dust-tight seal against contaminants Bonding provision on doors; grounding studs on body Accessory mounting channel provided in enclosure top Panel studs fit optional NEMA style panels mounting holes in bottom of enclosure for direct mounting or for optional sanitary legs and stainless steel floor stands Furnished hardware kit consists of panel mounting nuts, grounding hardware and hole seals for mounting holes FiniSH Stainless steel enclosures are unpainted. External surfaces have a #4 brushed finish. Optional mild steel panels are painted white. Optional conductive panels are available. ACCESSORieS See also Accessories. Industrial Corrosion Inhibitors Floor Stand Kit, Stainless Steel PAneLite Enclosure Lights Overview Panels for Type 3R, 4, 4X, 1 and 13 Enclosures Sanitary Leg Kits BULLETIN: WS Standard Product Catalog Number AxBxC WS6511SS 6.00 x x x 195 x 305 WS65118SS 6.00 x x x 195 x 457 WS6631SS 6.00 x 6 x x 1600 x 305 WS66318SS 6.00 x 6 x x 1600 x 457 WS74631SS x 6 x x 1600 x 305 WS746318SS x 6 x x 1600 x 457 WS74751SS x x x 1905 x 305 WS747518SS x x x 1905 x 457 WS74754SS x x x 1905 x 610 A x B x C are nominal dimensions. Purchase panels separately. A A B C Panel Conductive Panel 1.1 A60P48 A60P48G A60P48 A60P48G A60P60 A60P60G A60P60 A60P60G A7P60 A7P60G A7P60 A7P60G A7P7 A7P7G A7P7 A7P7G A7P7 A7P7G SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

88 Industrial Automation Supply - Tel: HOFFMan WateRSHED Free-Stand EnclOSures and AcceSSORies HoFFman WatersHED Free-Stand SanitaRY LEG KITS Sanitary Leg Kits provide space between the enclosure and the floor for better washdown accessibility. Available with fixed or independently adjustable legs. Adjustable leg shown. Four legs per kit. Maintains nema Type 4X rating when properly installed on a Hoffman Type 4X enclosure. BULLETIN: WSY Catalog Number Description Size L (in.) Size L (mm) WSASLKSS Adjustable Sanitary Leg Kit WSFSLKSS Fixed Sanitary Leg Kit EQUIPMENT PROTECTION PH FAX pentairprotect.com 17

89 Industrial Automation Supply - Tel: HOFFMan WateRSHED Free-Stand EnclOSures and AcceSSORies HoFFman WatersHED Free-Stand FLOOR STAND KIT, STAINLESS STEEL Use to raise free-stand enclosure. To install, drill holes in the bottom of the enclosure and bolt the floor stands to the enclosure. Each kit includes two stands. Type 304 stainless steel. Maintains UL/cUL Type 4X rating when properly installed on a Hoffman Type 4X enclosure. BULLETIN: A4SY H Catalog Number AFK11SS AFK118SS AFK14SS C L SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

90 Industrial Automation Supply - Tel: HOFFMan WateRSHED Free-Stand EnclOSures and AcceSSORies HoFFman WatersHED Free-Stand Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 19

91 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures PROLINE STAINLESS STEEL HMI ENCLOSURES PROLINE HMI ENCLOSURES PROline HMI ENCLOSURES INDUSTRY STANDARDS Sloped Fronts, Front, Rear and Bottom Options UL 508A Listed; Type 1; File Number E61997 cul Listed per CSA C. No 94; Type 1; File Number E61997 NEMA/eemAC Type 4, 4X, 1 iec 6059, IP66 APPliCatiON ProLine Stainless Steel Hmi Enclosures provide a comprehensive system for housing Human-Machine Interface (Hmi) computers and related control devices in a corrosive environment. With these enclosures you can develop a customized solution that meets your application s requirements exactly, including UL/CSA Type 4X protection. FEATURES PROLINE HMI Enclosure System Numerous ProLine Components are available in stainless steel. For optional stainless steel pendant arm mounting options, see Hoffman CS480 and CS600 options. See PROLINE Sloped Front HMI Enclosures in HMI - Human-Machine Interface chapter for more information. See PROLINE Assembled Enclosures in Modular Enclosure Systems section for more information. Sizes: PROLINE Stainless Steel HMI Enclosures fit most popular HMI models. The basic enclosure has an ergonomically sloped front that positions the screen for easy viewing. Equipment Mounting: Grid straps, rack angles and panels are available for all enclosure sizes. Large front and rear openings provide easy access. Enclosure Mounting: The ProLine system includes several optional mounting methods: stainless steel pendant arm systems, stainless steel pedestals and stainless steel bases. Systems can also be placed on tables, desks or flat surfaces. Protection from the Harshest Environment: ProLine Stainless Steel Hmi Enclosures meet tough NEMA Type 4X standards (IP 66). Enclosures are constructed of Type 304 stainless steel with stainless steel external hardware. Foam-in-place gasketing provides a tight, consistent seal. ACCESSORieS The front of the enclosure can be completed with a solid cover, solid door or window door. A solid cover or access door can be selected for the back. Solid or cutout bases for pedestal mounting are available. Handle and locking options are offered for all doors. Available with an additional front opening to accommodate several accessory front options. 0 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

92 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 1

93 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures SLOPED FRONT Full front opening for door/cover options has a 5-degree slope. Rear opening(s) for door and cover options. Optional ProLine frame shelf or ProLine grid system is recommended to provide a stationary platform for supporting deep equipment. The open bottom is suitable for joining the top to a 700-mm-tall ProLine frame. The bottom of the 600 x 600-mm sizes can be joined through a cutout base to a pedestal or pendant arm system. A support bracket accessory allows the 600 x 600-mm sizes to be suspended from an overhanging pendant arm. Sloped-front enclosures are Type 304 stainless steel. See PROLINE Sloped-Front HMI System and Accessories in the HMI - Human-Machine Interface chapter for more information and drawings. BULLETIN: P9S Catalog Number AxB mm/in. Description PST6SS 707 x x 3.94 Front Opening E x G mm/in. Nominal Size mm/in. Stainless Steel 700 x 600 x x x 1.11 Rear Opening F x H mm/in. 636 x x 1.11 D mm/in Internal Mounting J mm/in Internal Mounting K mm/in Product Weight (lb.) 68.0 COVERS FOR UPPER FRONT OF PROLINE SLOPED FRONTS Solid 16 gauge Type 304 stainless steel covers are secured to the front opening of a ProLine sloped front with semi-flush cover screws along the top and bottom cover edges. Ground stud and mounting hardware are included. Seamless foam-in-place gasket assures a water-tight and dust-tight seal. See PROLINE Sloped-Front HMI System and Accessories in the HMI - Human-Machine Interface chapter for more information and drawings. BULLETIN: P9S Catalog Number Description Cover Size H x W mm/in. PCS58FSS Stainless Steel 506 x x PCSFSS Stainless Steel 707 x x 3.30 Product Weight (lb.) SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

94 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures DOORS FOR UPPER FRONT OF PROLINE SLOPED FRONTS Solid 16 gauge Type 304 stainless steel doors are available with or without windows. Doors are hinged at lower edge and have quarter-turn latches. A stop arm assembly holds the door at 95 degrees (horizontal) from its closed position. Standard latch and insert options are available. Ground stud and mounting hardware are included. Seamless polyurethane foam-in-place gasket assures water-tight and dust-tight seal. Window doors feature a maximum size polycarbonate or glass window.5-in. thick with a smoke gray tint. Window is fieldreplaceable. See PROLINE Sloped-Front HMI System and Accessories in the HMI - Human-Machine Interface chapter for more information and drawings. Solid Doors Catalog Number Description Door Size H x W mm/in. PDS56FSS Stainless Steel 504 x x 3.30 PDS58FSS Stainless Steel 504 x x PDSFSS Stainless Steel 705 x x 3.30 Window Doors Catalog Number Description Door Size H x W mm/in. PDW58FSS Stainless Steel 504 x x Window Size M x N mm/in. 36 x x 5.00 Product Weight (lb.) Product Weight (lb.) 4.0 BULLETIN: P9S COVERS FOR REAR OF PROLINE SLOPED FRONTS Solid 16 gauge Type 304 stainless steel cover fits rear opening of ProLine sloped fronts and is secured with semi-flush cover screws along right and left cover edges. Use ProLine frame shelf or ProLine grid straps to support the operator interface. Seamless foam-in-place gasket assures water-tight and dust-tight seal. Ground stud and mounting hardware are included. Optional tamperresistant screws are available. See PROLINE Sloped Front HMI Enclosures in HMI - Human-Machine Interface chapter for more information. BULLETIN: P9S Catalog Number Description Cover Size H x W mm/in. PCSRSS Stainless Steel 596 x x 7.79 PCS5A6RSS Stainless Steel 679 x x 3.51 Product Weight (lb.) EQUIPMENT PROTECTION PH FAX pentairprotect.com 3

95 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures DOORS FOR REAR OF PROLINE SLOPED FRONTS Solid 16 gauge Type 304 stainless steel rear doors are side-hinged. The hinges are hidden and provide 130-degree door swing. Optional ProLine 180-degree hinge kit is available. Doors can be hinged from left or right. Door includes two-point latching with a flush slotted quarter-turn insert. Standard ProLine handle and insert options are available for retrofit (see Accessories for Solid Rear Doors in HMI - Human-Machine Interface chapter). Use PROLINE frame shelf or ProLine grid straps to support the operator interface. Ground stud and mounting hardware are included. Seamless foam-in-place gasket assures a water-tight and dusttight seal. See PROLINE Sloped Front HMI Enclosures in HMI - Human-Machine Interface chapter for more information. BULLETIN: P9S Catalog Number Description Door Size H x W mm/in. PDSRSS Stainless Steel 706 x x 3.30 Product Weight (lb.) 19.5 PROLINE SOLID REAR DOOR ACCESSORIES Accessories listed here are designed for use with ProLine Sloped Front rear doors. See PROLINE Accessories in the Modular Enclosure Systems chapter. BULLETIN: P0, UX1Y Flush Handle Catalog Number Description PSHKBL One handle and two keys Data Pockets Catalog Number ADP1 ADP Key Inserts Catalog Number PKOTM7 PKOTM8 PKOTM65 PKOSM7 PKOSM8 PKODBK3 Description Small data pocket Large data pocket Description 7-mm triangle 8-mm triangle CNOMO 7-mm square 8-mm square Double-bit with 13-mm pin PEDEStal Pedestal is 36-in. (914-mm) tall and provides optimal viewing and operating height. Tube is 14 gauge Type 304 one-piece construction. Legs are 7 gauge Type 304 for rigidity. Cable access plate and leg levelers are included. Leg levelers can be removed for anchoring pedestal to floor. Pedestal has smooth vertical brushed finish. Catalog Number A Description AP36SS Stainless steel pedestal 914 Pedestal will accept pedestal accessories that are not stainless steel. These include swivel tilt, swivel and angle adapters. BULLETIN: P1S 4 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

96 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures EXTENSION Pedestal extension can be ordered separately to provide additional 6 in. (15 mm) of height for standing position. Extension is 14 gauge Type 304 stainless steel with a smooth brushed finish. Extension will accept pedestal accessories that are not stainless steel. These include swivel tilt, swivel and angle adapters. BULLETIN: P1S Catalog Number APE6SS Description Stainless Steel EQUIPMENT PROTECTION PH FAX pentairprotect.com 5

97 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures PROline -PC PACKAGE, TYPE 1 INDUSTRY StanDARDS UL 508A Listed; Type 1; File No. E61997 cul Listed per CSA C. No 94; Type 1; File No. E61997 NEMA Type 1 CSA File No. 4186: Type 1 iec 6059, IP55 VDE IP55 APPLICATION This enclosure offers effective protection for computer systems in industrial environments. Three separate compartments within the enclosure can be used to protect computer monitors, keyboards, CPUs, printers and other peripheral equipment. The 19-in. diagonal top window door, hinged on the left, offers viewing access for a variety of monitor sizes and has a small flush swing handle with keylock for system security. The vented frame shelf in the top compartment is constructed of 16 gauge steel and finished with RAL 7035 textured light-gray polyester powder paint. The ProLine keyboard compartment includes a locking feature, an angled palm rest, a cable access port for wiring and integral mouse pad holders for left-handed or right-handed persons. The bottom compartment includes a solid door hinged on the left with a small flush swing handle with keylocking. This compartment can be used to install computer equipment, panel mounted equipment or rack mounted control systems. The frame is enclosed with solid sides, a solid top and a 100-mm solid base. A rear mounted solid door with a keylocking flush swing handle offers rear access to the computer equipment and wiring. For more information, see PROLINE Assembled Enclosures in the Modular Enclosure Systems chapter. FiniSH External components have a smooth #4 brushed finish. External doors, sides, top and base are Type 304 stainless steel. Keyboard compartment has RAL 9005 textured black polyester powder paint finish. ACCESSORieS See also Accessories. Caster Kit Thermoplastic Data Pocket MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: P0, P0PC, P0S Standard Product Catalog Number AxBxC mm/in. PPC1666SS 1688 x 608 x x 3.94 x mm solid base is included in A dimension M mm/in N mm/in P mm/in R mm/in Top Door Height mm/in Top Door Width mm/in Bottom Door Height mm/in Summary of Components Included in Assembled ProLine-PC Packages Catalog Number AxBxC mm/in. Component Qty. PFPC x 599 x 588 Frame, steel x 3.58 x 3.15 PT66SS 0.00 Solid top, stainless steel 1 PDS86SS 0.00 Solid door (bottom), stainless steel 1 PDWT86PCSS 0.00 Window door (top), stainless steel 1 PSS166SS 0.00 Solid side, stainless steel PDS166SS 0.00 Solid door (rear), stainless steel 1 PB166SS 0.00 Solid base (100mm), stainless steel 1 PKBC6R 0.00 Black painted keyboard compartment 1 Additional Stainless Steel Components Available for ProLine-PC Enclosures Catalog Number mm/in. Component PCSA6SS 0.00 Access cover PDWG86SS 0.00 Window door (bottom) PCST86PCSS 0.00 Solid cover (top) PCS86SS 0.00 Solid cover (bottom) PDST86PCSS 0.00 Solid cover (bottom) Bottom Door Width mm/in SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

98 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 7

99 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures 8 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

100 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 9

101 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures PROline -SY PACKAGE, TYPE 1 INDUSTRY StanDARDS UL 508A Listed; Type 1; File No. E61997 cul Listed per CSA C. No 94; Type 1; File No. E61997 NEMA Type 1 CSA File No. 4186: Type 1 iec 6059, IP55 VDE IP55 APPLICATION This enclosure is designed to protect many industrial operator interface systems. Two separate compartments within the enclosure can be used to protect panel- or rack-mounted control systems, operator interface packages and a variety of other electronic control components. the top compartment is open and can accommodate a variety of front cover and door options internal grid straps are factory-installed in top compartment to provide support for operator interfaces the bottom door is hinged on the left and has an attractive keylocking flush swing handle the solid rear door permits rear access to equipment and wiring and includes a keylocking pushbutton handle Standard external components include solid sides, solid top and a 100-mm solid base Order cover, door or window door for top front to complete the enclosure. Solid covers with pre-fabricated operator interface cutouts are available; consult Hoffman for ordering information. For more information, see PROLINE Assembled Enclosures in the Modular Enclosure Systems chapter. FiniSH Stainless steel enclosures are unpainted. External components have a smooth #4 brushed finish. External doors, sides, top and base are Type 304 stainless steel. ACCESSORieS See also Accessories. Caster Kit Thermoplastic Data Pocket MODIFICatiON AND CUSTOMIZatiON Hoffman excels at modifying and customizing products to your specifications. Contact your local Hoffman sales office or distributor for complete information. BULLETIN: P0, P0S, P0SY Standard Product Catalog Number AxBxC mm AxBxC in. PSY1666SS 1600 x 600 x x 3.60 x 3.60 Top and bottom door opening size: 9.09 x 1.11 in. (739 x 536 mm) on 600-mm wide; 9.09 x 8.98 in. (739 x 736 mm) on 800-mm wide. Summary of Components Included in Assembled ProLine-SY Package Catalog Number AxBxC mm AxBxC in. Component Qty. PFSY Frame 1 PT66SS 0.00 Solid top, stainless steel 1 PDS166SS 0.00 Solid door (rear), stainless steel 1 PDS86SS 0.00 Solid door (bottom), stainless steel 1 PB066SS 0.00 Solid base (100 mm), stainless steel 1 PSS166SS 0.00 Solid side, stainless steel PFHKBL 0.00 Flush pushbutton handle (keylock) 1 PSHKBL 0.00 Small flush swing handle 1 PGH3S Grid system strap 1 PGH3S Grid system strap 1 Additional Stainless Steel Components Available for ProLine-SY Enclosure Catalog Number mm in. Component PDWG86SS 0.00 Window doors (top/bottom) PCS86SS 0.00 Solid covers PCSK Solid covers with OI cutouts 30 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

102 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures EQUIPMENT PROTECTION PH FAX pentairprotect.com 31

103 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures 3 SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION

104 Industrial Automation Supply - Tel: PROline HMI Enclosures PROLINE HMI Enclosures Notes EQUIPMENT PROTECTION PH FAX pentairprotect.com 33