SPECIAL CONSTRUCTION PRODUCTS
|
|
- Hester Beasley
- 7 years ago
- Views:
Transcription
1 SPECIAL CONSTRUCTION PRODUCTS
2 Content Injection Tubes WEBAC Injection Tube AB/Type Accessories... 2 Installation Swelling Tapes WEBAC Bentonite Swelling Tape... 4 WEBAC Polymer Swelling Tape... 5 Accessories Installation WEBAC Swelling Paste NOTE Please observe all existing regulations and the instructions in the technical data sheets on the respective WEBAC products. We will be glad to help you find solutions to individual problems. Tie Point Sealing WEBAC Plug/Ring/Flange WEBAC Coving Mortar WEBAC Injection Packers Joint Repairs WEBAC Sealing Tape TPE WEBAC Impact Profiles EPDM WEBAC Back Rod for Joint Filling WEBAC Compression Profiles Injection Silane WEBAC All the data given in this brochure are of an informative nature representing our current state of knowledge and are in no way binding. Any information regarding this brochure given by our employees is likewise non-binding. As the exact chemical, technical and physical conditions of the actual application are unknown to WEBAC, this information does not preclude examination of the products and procedures for the intended application by the user. WEBAC is thus unable to guarantee results. The user is fully responsible for the observation of existing regulations and requirements when using the products. With the publication of this brochure all previous versions are no longer valid. Copyright by WEBAC-Chemie GmbH. Reproduction and/or printing of extracts from this brochure is permitted only with the prior consent of WEBAC-Chemie GmbH. Version 07/16 Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 1
3 Injection Tubes WEBAC Injection Tubes AB/Type 2 AbP C E R T WEBAC National Test Certificate I F I E D Sealing of construction joints in concrete construction (National Test Certificate) Structural or elastic installation of concrete building elements Additional sealing of joint tapes or joint plates Easier and quicker installation at all levels and angles Minimum injection resin consumption thanks to optimal tube dimensioning WEBAC Injection Tube AB Perforated plastic tube Ø internal: 6 mm, Ø external: 12 mm National Test Certificate in combination with WEBAC 1403P and WEBAC 1405 WEBAC Injection Tube Type 2 Perforated tube with double fabric membrane Ø internal: 6 mm, Ø external: 12 mm National Test Certificate in combination with WEBAC 1405 Accessories Injection- and ventilation adapter Shuttering packer K Tube connector Cone screw Clamp for fastening to waterbars and waterstops Clamp without/with hole/ plug-in clamp Fastening grid 2 Special Construction Products
4 Installation Shuttering packer Shuttering Reinforcement Shuttering packer Foundation Injection Tube Clamp For further information please refer to the installation manual of the injection hose. Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 3
5 Swelling Tapes WEBAC Bentonite Swelling Tape AbP C E R T WEBAC National Test Certificate I F I E D Sealing of construction joints against soil moisture, non-pressing and pressing water in concrete and reinforced concrete construction Sealing of pipe ducts Reversible swelling behavior Self injecting properties No separation and thus no washing out from joints Profile shape: 20 x 25 mm Water pressure: tested with 5 bar Concrete cover: at least 8 cm Tests: National Test Certificate by MPA-BS Test Report: Immersion of WEBAC Swelling Tapes in saline solutions of different concentration Installation Installation with WEBAC Contact Adhesive, WEBAC Fastening Grid, mechanical fastening 4 Special Construction Products
6 Swelling Tapes WEBAC Polymer Swelling Tape AbP C E R T WEBAC National Test Certificate I F I E D Sealing of construction joints against soil moisture, non-pressing and pressing water in concrete and reinforced concrete construction Sealing of joints in precast concrete unit construction, tubbing construction Repair of expansion joints Sealing of pipe ducts Reversible swelling behavior Permanent dimensional stability Excellent chemical resistance Flexible Profile shape: 20 x 5 mm, 20 x 10 mm, 20 x 20 mm, 30 x 30 mm Water pressure: tested with 5 bar Concrete cover: at least 8 cm Tests: National Test Certificate by MPA-BS Test Report: Immersion of WEBAC Swelling Tapes in saline solutions of different concentration Installation Installation with WEBAC Contact Adhesive, mechanical fastening Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 5
7 Swelling Tapes Accessories WEBAC Contact Adhesive Bonding of WEBAC Polymer Swelling Tape and WEBAC Bentonite Swelling Tape Flexible Fast curing Adhesion also to wet surfaces WEBAC Fastening Grid Fastening of WEBAC Bentonite Swelling Tape Shape: U shape Length: 1 m Density, 23 C: 1.4 g/cm 3 Skin forming time at 50 % air humidity, 23 C: 5 min Curing time at 3.5 mm layer thickness, 23 C: 24 h Application temperature: + 5 C to + 40 C Tensile strength elongation at break: 3.0 N/mm % E modulus: 1.6 N/mm 2 The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. 6 Special Construction Products
8 Installation Shuttering Reinforcement Pipe duct Bentonite Swelling Tape with fastening grid Foundation Polymer Swelling Tape a b Installation of WEBAC Polymer Swelling Tape with WEBAC Contact Adhesive Installation of WEBAC Bentonite Swelling Tape with WEBAC Fastening Grid, mechanical fastening c Variations of installation: a Overlapping connection Horizontal corner connections: b Polymer swelling tape c Bentonite swelling tape Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 7
9 Swelling Tapes WEBAC Swelling Paste Sealing of construction joints, material transitions and other waterproofing-related details in concrete and reinforced concrete construction Fastening of WEBAC Swelling Tapes on concrete or various other substrates Reliable and easy sealing of intersections also in areas difficult to access 1C PU, swellable Very high elongation Moisture-curing Easy to use also on uneven ground Density, 23 C (ISO 2811): 1.4 g/m 3 Skin forming time at 50 % air humidity, 23 C: 120 min Curing time at 1.5 mm layer thickness, at 50 % air humidity, 23 C: 24 h Application temperature: +3 C to +30 C Tensile strength elongation at break (ISO 527) 1.0 N/mm² 1,000 % Swelling in water, 23 C, > 14 d: 400 % The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. Instruction for use Cartridge processing 8 Special Construction Products
10 Tie Point Sealing WEBAC Plug/Ring/Flange C E R T WEBAC Tested with 5 bar I F I E D Sealing of intersections/tie points with swellable sealing rings and plugs in concrete and reinforced concrete construction Suitable for fiber reinforced concrete pipes, plastic pipe spacers, foundation earth electrodes WEBAC Plug WEBAC Ring Ø 22, 24, 26 mm Ø 24 mm Easy and economical solution Sealing with a simple hammer blow No gluing Temperature- and weather-independent Active swelling sealant Also suitable in case of negative pressing water WEBAC Flange Water pressure: tested with 5 bar Tests: Test report by MPA-BS Ø 12, 17, 24, 31, 39 mm The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 9
11 Coving Mortar WEBAC Coving Mortar Making of coving moldings Closing and leveling of irregularities Mortar for repairing blowholes Resin screed according to EN (CE-Declaration of Performance /4) Universally applicable Reliable application Smooth, closed surface Mixing ratio: 9.64 : 0.36 parts by weight (10 kg) Density, 20 C (ISO 2811): 1.9 g/cm 3 Workable life, 20 C (WEBAC test specification following ISO 9514): 45 min Application temperature, Structural element and material: 10 C 25 C Curing process: accessible to pedestrians after approx. 5 h Compressive strength (ISO 604): > 50 N/mm² Bending tensile strength (ISO 178): > 8 N/mm² Tensile strength (ISO 527): > 20 N/mm² Consumption rate Triangle cove 3 x 3 cm: approx. 1 kg/running meter Cove 5 x 5 cm: approx. 1.2 kg/running meter Resin screed: approx. 2 kg/m 2 /mm CE-Declaration (EN 13813): SR - B2.0 Fire behavior: minimum B2 according to DIN , The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. 10 Special Construction Products
12 Injection Packers WEBAC Injection Packers Injection packers are filler necks used as connection pieces between the structural elements and the injection device during injection processes, e.g. when Sealing buildings Repairing cracks Suitable for... PU Injection Foam Resins PU Injection Resins Epoxy Injection Resins Acrylate Gels PU Casting Foam Resins Silicate Injection Grouts WEBAC Mechanical Packers Type S Ø 10 mm 13 mm, length 70 mm, with zerk head fitting Ø 10 mm 13 mm, length 115 mm, with zerk head fitting Ø 17 mm, length 115 mm, with button head fitting WEBAC One-Day Packer Ø 13 mm, length 115 mm, with zerk head fitting WEBAC Surface Packer Ø 44 mm, plastic, with zerk head fitting Further packers on request. Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 11
13 Joint Repairs WEBAC Sealing Tape TPE AbP C E R T WEBAC National Test Certificate I F I E D Sealing of construction joints and predetermined breaking points in cast-in-situ concrete resistant to hydrostatic pressure Sealing of precast concrete units and precast walls Exterior sealing system in strip form Permanently elastic and aging resistant Installation Gluing with WEBAC 4525 Total width: 200 mm +/-3 mm Coating width external: 140 mm +/-3 mm, internal: 100 mm +/-3 mm Total thickness: approx. 1.4 mm +/-0.3 mm Maximum tensile force longitudinal: > 60 N/15 mm, transversal: > 40 N/15 mm Breaking elongation longitudinal: > 20 %, transversal: > 100 % Coating: Permanently elastic, aging resistant, thermoplastic elastomer Substrate: Polyester fabric, longitudinally stable, transversally elastic Bursting pressure: > 2.5 bar Temperature resistance: -30 C to +90 C Tests: National Test Certificate by MPA-BS The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. 12 Special Construction Products
14 Joint Repairs WEBAC Impact Profiles EPDM Sealing of structural elements joints and movement joints Suitable as end profile for joints Heat resistance Workability also at low temperatures Weathering, chemical, UV and ozone resistance Installation Manually or mechanically with a special chisel hammer The profile size should exceed the joint width by approx. 30 % Profile shape: Ø 20, 25, 30, 35, 40, 45, 50 mm Density: approx g/cm³ Tensile strength: 3 N/mm² Elongation at break: 150 % Shore hardness A: approx. 20 +/- 5 Surface texture: even Color: grey black The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 13
15 Joint Repairs WEBAC Back Rod for Joint Filling Limitation of joint depth Back filling of joints Product sizes Profile: Ø 6 mm 8 mm 10 mm 15 mm Other sizes on request. Closed cell structure not water absorbent High elasticity and adaptability Installation Make sure that the back rod for joint filling is compressed by approx. 25% Do not push into the joint using a sharp object 14 Special Construction Products
16 Joint Repairs WEBAC Compression Profiles Sealing of structural joints and movement joints Suitable as end profile for joints TPE: Also flexible at low temperatures Aging resistant UV-resistant High elongation at break Nitriflex: Chemical resistance Aging resistant Permanently elastic High breaking elongation Profile width Joint width Profile 1 (optional Nitriflex or TPE) in mm Profile 2 (optional Nitriflex or TPE) in mm Further sizes on request. Installation Manually or mechanically with a special chisel hammer Brochure Special Construction Products 07/16 WEBAC-Chemie GmbH 15
17 Injection Silane WEBAC 2130 C E R T WEBAC WTA Certificate I F I E D Damp proof course in masonry up to a degree of 95 % moisture penetration Easy and reliable application Easy-dose product Causes no darkening of color or stain formation on the building materials Instruction for use Pressureless injection by gun Density, 20 C: 0.8 g/cm 3 Application temperature: 10 C 25 C Kinematic viscosity, 21 C: > 20.5 Drill hole diameter: 12 mm Drill hole spacing: cm Material consumption: 100 ml/running meter/10 cm wall thickness The specified data are values determined under laboratory conditions and are subject to a certain fluctuation. Deviations are possible in practice depending on the respective object situation. 16 Special Construction Products
18 Our Formula Your Solution WEBAC-Chemie GmbH Fahrenberg Barsbuettel/Hamburg, Germany Tel Fax We are an associate member in DBV
Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
More informationSikaProof A Technology
SikaProof A Technology The fully bonded waterproofing system Keep your basements durably and securely watertight What is SikaProof A? How does it work? Where can it be used? What are the advantages of
More informationWaterproofing construction Joints
WaterproofingSystems Waterproofing construction Joints Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer Contents Basics Connective, loadable and resilient: Joints in building construction
More informationWATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
More informationAlways. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+
Always. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+ The wall sleeve The wall sleeve a largely unnoticed but very important sealing part. Wall sleeves
More informationMILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS
MILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS May 29, 2013 Revision B Structural Guideline for Design and Installation Holes in Composite Floor Slab Terminal 3, Departure Level
More informationTHORO. Waterproofing Systems
THORO Waterproofing Systems Contents Welcome to the world of Thoro 3 Waterproofing 4 Thoroseal 5 Thoroseal FC 6 Thoro Acryl 60 6 Thoroseal WR 7 Thoroseal FX100 8 Thoroseal FX110 9 Thoroseal FX 1K 10 Thoro
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationConcrete Waterproofing Systems. Integral Protection. www.tritonsystems.co.uk
Concrete Waterproofing Systems Integral Protection n Type B Integral Protection in accordance with BS 8102 (2009) n Unique chemical admix for waterproofing and protection of concrete n A complete and permanent
More informationWATERPROOFING SikaProof -A TECHNOLOGY
SikaProof -A TECHNOLOGY content What is SikaProof -A? 6 How does it work? 8 Where can it be used? 0 What are the advantages of SikaProof -A? 2 How should it be installed? SikaProof -A system components
More informationTechnical Data Sheet Art. No. 1810. Kiesol. applications. Shelf-life. rate depending on application. Characteristic data of the product
Page 1 of 5 Technical Data Sheet Art. No. 1810 Kiesol Deep protection silicification for waterproofing and refurbishing old and new buildings in the Kiesol System according to WTA Code of Practice 4-4-04/D
More informationConstruction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description
Product Data Sheet Edition 15/10/2014 Identification no: 02 07 04 10 300 0 000002 SikaProof A Edge SikaProof A-08 Edge, A-12 Edge Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing
More informationHIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
More informationConstruction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION
Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two
More information12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
More informationInterior Walls below and above ground OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 2 below and above ground V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V The flexible, fast and cost-effective answer
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationTunnels & Arches OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM
P r o d u c t a p p l i c a t i o n s a n d t e c h n i c a l i n f o r m a t i o n 5 Tunnels & Arches V OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM V Create dry usable space with the original X pattern
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationWATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
More informationALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard WP
More informationFLEXIBLE THERMAL INSULATION MADE OF SILICONE 2012-06
FLEXIBLE THERMAL INSULATION MADE OF SILICONE 2012-06 Table of Contents 1. Flexible, thermal insulation made of Silicone...3 1.1 Features and benefi ts...3 1.2 Designs...3 1.3 Silicone processing at Winkler...3
More informationHigh-performance, 2-part epoxy anchoring adhesive
Product Data Sheet Edition 27/04/2009 Revision no: 0 Identification no: 01 04 02 06 001 0 000030-3+ -3+ High-performance, 2-part epoxy anchoring adhesive Construction Product Description Uses Solvent-free,
More informationINSTALLATION INSTRUCTIONS RISE SEALING SYSTEM FOR MULTI-CABLE TRANSITS
INSTALLATION INSTRUCTIONS RISE FOR MULTI-CABLE TRANSITS TESTED TO IMO RESOLUTION A.754(18); FIRE CLASS A0-A60 and H0-H120 EC (MED) CERTIFICATE 09156/CO ISSUED BY BUREAU VERITAS PLEASE ALSO REFER TO THE
More informationThe surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.
QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationThe AQUAFIN Approach to Concrete Repair
Concrete Repair Building Product Systems Waterproofing & Concrete Restoration Decorative Coatings Moisture Vapor Remediation & Flooring Injection Grouting The AQUAFIN Approach to Concrete Repair www.aquafin.net
More informationWATERPROOFING SIKAPLAN MEMBRANE SYSTEMS FOR BASEMENTS TECHNOLOGY & CONCEPTS
SIKAPLAN MEMBRANE SYSTEMS FOR BASEMENTS TECHNOLOGY & CONCEPTS SIKAPLAN A RELIABLE AND DURABLE SYSTEM BUILDING STRUCTURES WITH DEEP BASEMENTS that are exposed to highly aggressive ground conditions and
More informationOLDROYD. Interior Walls. Interior Walls. below and above ground. below and above ground
S S.doc.2 12/3/03 6:26 pm Page 1 Oldroyd produce a wide range of products to combat the problems of water ingress and dampness in buildings. Other brochures are available covering the following : We have
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationvalid as of 1 April 2014 Intec injection hose system
FRANK Product List valid as of 1 April 2014 Intec injection hose system Intec injection hose systems Intec injection hose systems ensure secure, simple and rapid sealing of horizontal and vertical construction
More informationELASTOCEM. Technical features. Applications. Two-component flexible, waterproofing and protective cementitious grout.
Two-component flexible, waterproofing and protective cementitious grout. 1504-2 PI-MC-IR Technical features Two-component grout, based on cements, selected aggregates, special additives and synthetic polymers
More informationPC-Concrete Injectable Concrete Anchoring and Repair System
PC-Concrete Injectable Concrete Anchoring and Repair System DESCRIPTION: PC-Concrete is a two component (1:1 ratio), 100% solids, high modulus, structural epoxy paste. PC-Concrete is a solvent free, no
More informationSIKABIT W-15 WET-BONDED WATERPROOFING MEMBRANE
SIKABIT W-15 WET-BONDED WATERPROOFING MEMBRANE BASEMENT WATERPROOFING INTRODUCTION Many different products are available for basement waterproofing. Considering ideal jobsite conditions (perfect substrate
More informationWaterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
More informationNEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE
NEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE What is negative side waterproofing? A typical case of negative side waterproofing is when water comes through the walls of a basement and the
More informationRetail Price List 2015
Retail Price List 2015 SETTING MORTARS SERVOFLEX TRIO SUPER TEC Flexible Full Transfer Thin Set and Medium Bed Mortar 20 KG Flexible, cement-based thin set and medium bed mortar with polymer additive for
More informationCrack Repair. Closing, sealing, limited flexibility bridging and bridging where structural strength is required. Munich airport
Crack Repair Closing, sealing, limited flexibility bridging and bridging where structural strength is required Munich airport Crack Repair WEBAC Chemie GmbH Fahrenberg 22 22885 Barsbüttel near Hamburg
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationLAYING BLOCK AND BRICK
LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct
More informationPuddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
More informationBETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
More informationINTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS. Multi-Layer Technology provides increased strength.
INTERIOR WALLS AND BASEMENTS CHOOSING THE RIGHT MEMBRANE FOR INTERIOR WALLS Multi-Layer Technology provides increased strength. Specifically designed for interior applications. Compatible with most internal
More informationwww.pitchmasticpmb.com PmB Expansion Joints World leaders in expansion joint technology
www.pitchmasticpmb.com Expansion Joints World leaders in expansion joint technology High performance expansion joint solutions Pitchmastic offers a comprehensive range of specialist services to the civil
More informationElastoseal EPDM Tanking System Waterproofing of basements, foundations and cut-and-cover tunnels
Elastoseal EPDM Tanking System Waterproofing of basements, foundations and cut-and-cover tunnels EPDM Rubber - facts about EPDM Product range Elastoseal EPDM Tanking membrane can either be supplied in
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More informationPassive Fire Protection
Firestopping Passive Fire Protection FS20 Firestop Compound 6 hour fire rated penetration seals for electrical and mechanical services FS20 Firestop Compound FS20 Firestop Compound is a Fire-Rated Penetration
More informationWATERPROOFING BASEMENTS
WATERPROOFING BASEMENTS CONSTRUCTION CHEMICALS DIVISION Pidilite manufactures and markets a wide range of construction chemical products under two brands Dr. Fixit & Roff covering different aspects of
More informationASHGHAL Interim Advice Note No. 004
Ashghal Specification for Waterproofing of Cut and Cover Tunnel and Underpass Highway Structures ASHGHAL Interim Advice Note No. 004 Specification for Waterproofing of Cut and Cover Tunnel and Underpass
More informationkalox-pool draft 231 repairing refurbishing and finishing KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete.
kalox-pool draft 231 KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete. repairing refurbishing and finishing 8-30 C Trowel / Spray 4 mm kalox-pool EN 1504-2 MAIN FEATURES
More informationGlass Fibers Reinforced Composits (GFRP) for TUNNELLING
Glass Fibers Reinforced Composits (GFRP) for TUNNELLING Introduction The main utilization of GFRP Composites is extended to the entire field of temporary consolidation. The success of this application,
More information3M Scotch-Weld EPX Two-component structural adhesives and applicator guns
M Scotch-Weld EPX Two-component structural adhesives and applicator guns Innovation What is a structural adhesive? M s high-strength structural adhesives are fundamentally load-bearing formulations. Bond
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationDELTA Premium Moisture Management Systems for Foundations.
DELTA protects property. Saves energy. Creates comfort. DELTA Premium Moisture Management Systems for Foundations. DELTA Premium Moisture Management Systems provide the best protection for foundations.
More informationHow To Test A Wrap N Drain X Dampproofing System
National Research Council Canada Institute for Research in Construction Conseil national de recherches Canada Institut de recherche en construction CCMC 13094-R &&0& EVALUATION DIVISION 07111 REPORT Issued
More informationAdhesives. Sticking to what we know best! Bonding and cleaning Window and door construction PVC, aluminium and wood. 33/08 made by Weiss
Adhesives Bonding and cleaning Window and door PVC, aluminium and wood Sticking to what we know best! 33/08 made by Weiss Window & door Our company The expert for adhesives for window and door As one of
More informationWOOD FLOORING ADHESIVES
dispersion adhesive 2 component adhesive MS polymer adhesive WOOD FLOORING ADHESIVES PROFESSIONAL PRODUCTS SOUDAL, leading adhesive manufacturer WOOD FLOORING ADHESIVES Soudal NV, located in Turnhout (B)
More informationWecryl Waterproofing System under surfacing supplied by others
Brief description The Wecryl waterproofing system allows a high-quality, seamless and crack-bridging waterproofing layer to be installed under loose-laid or bonded surfacing supplied by others (stone slabs,
More informationIntegrated Manhole Ladder System
Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete
More informationSILICONE PRODUCTS FOR THE ELECTRONICS INDUSTRY CREATING TOMORROW S SOLUTIONS
SILICONE PRODUCTS FOR THE ELECTRONICS INDUSTRY CREATING TOMORROW S SOLUTIONS BONDING, SEALING, COATING, ENCAPSULATION: PROCESSES IN THE ELECTRONICS INDUSTRY BOLTING, SOLDERING, RIVETING: WHY NOT JUST BOND?
More informationDubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
More informationMineral waterproof coating PCI Dichtschlämme
Mineral waterproof coating PCI Dichtschlämme 305 for basement walls, swimming pools and potable water tanks With official test certificate. FIELDS OF For indoor and outdoor use. For walls and floors. For
More informationTest report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA 18000 / Israel. J. Magner Dipl.-Ing. N. Machill.
Kiwa Polymer Institut GmbH Quellenstraße 3 65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 7013-E Testing order: Test of the waterproofing system based
More informationHigh Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES
High Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES ARDEX manufacture a complete range of high performance building
More informationCHESTERFLEX ROOF WATERPROOFING MEMBRANES
CI/SfB (47) Ln2 Chesterfelt Ltd CHESTERFLEX ROOF WATERPROOFING MEMBRANES Certificate No 94/3062 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO CHESTERFLEX ROOF WATERPROOFING MEMBRANES, POLYESTER REINFORCED
More informationProduct Systems AQUAFIN-IC CEMENTITIOUS CRYSTALLINE PENETRATING WATERPROOFING. Waterproofing Specification
AQUAFIN-IC CEMENTITIOUS CRYSTALLINE PENETRATING WATERPROOFING Typical s Table of Contents: No. 4 5 6 7 8 9 0 External waterproofing of below ground concrete wall & slab Internal waterproofing of foundation
More informationCERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
More informationKnauf Aquapanel Interior. Tile Backing. Cement board for wet areas. Will not deteriorate in water. Easy to score and snap
Tile Backing Will not deteriorate in water Easy to score and snap Resistant to mould and mildew Knauf Aquapanel Interior Cement board for wet areas Knauf Aquapanel Interior Cement Board Drywall for Wet
More informationnecessary for years of satisfactory service. SmartBlock insulating form concrete walls share the
Chapter 7 PLUMBING AND ELECTRICAL 7.1 Introduction to Plumbing and Electrical Consideration of support services such as plumbing and electrical systems from the preliminary schematics phase through final
More informationThe assessment is described in the following pages which form integral parts of this certificate, which should be read in its entirety.
Cl/SfB (13.1) Ly (L2) BRE CERTIFICATION LTD CERTIFICATE OF ASSESSMENT PRODUCT Powerbase RB 340 and RB 370 Radon Resistant Membranes CERTICATE NO. 100/03 ISSUED: MARCH 03 REISSUED: NOVEMBER 07 SUPPLIED
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Joint Fillers Formwork Direct are proud to be The UK and Ireland distributor for LJA Miers & Co. who have been responsible for many of the developments in Joint Fillers that are today accepted as common
More informationHanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
More informationPRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
More informationRIW SHEETSEAL 226 BENEFITS APPLICATIONS APPLIED TO. CI/SfB TN6 L6813. November 2013. l Water and water vapour barrier. l Factory controlled thickness
CI/SfB TN6 L6813 November 2013 RIW SHEETSEAL 226 is a cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper. Primer is
More informationSECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE)
SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE) PART 1 GENERAL 1.1 DESCRIPTION 1. Fluid applied flexible acrylic waterproofing system over concrete. This work shall include the
More informationSikaflex Sealant Installation. Sika Corporation
Sikaflex Sealant Installation 1 Critical Success Factors Substrate preparation If done properly would probably eliminate 95% of all call backs Most common mode of sealant failure Must remove all weak material
More informationEuropean Technical Assessment ETA-15/0028 of 23/02/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationHYLINER AKS HDPE LINING
HYLINER AKS HDPE LINING FOR CONCRETE PIPE Manufactured from HDPE Available in white and black Sheets up to 3 m width D1.12 HyLiner AKS HDPE Lining for Concrete Pipe October 2013 0800 WE PIPE (93 7473)
More informationDENSO WATERPROOFING SYSTEMS
DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413
More informationFosroc Proofex Engage
Technical Data Sheet Pre-applied waterproofing membrane conforming to the requirements of BS EN 13967:2004 and BS 8102:2009. Proofex Engage mechanically bonds to poured concrete, remaining in place if
More informationSealing & Bonding Sika solutions for Window Installation
Sealing & Bonding Sika solutions for Window Installation Sika s Comprehensive Fenestration Competence Benefit of our solution Globally, growing requirements to save energy and to utilize natural resources
More informationSaint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
More informationConstruction. Pre-Bagged Structural Waterproofing System. Product Description. Product Data. Tests. Form
Construction Product Data Sheet Edition 15/07/2013 Identification no: 01 07 05 04 001 0 000001 Sika 1 Pre-Bagged Structural Waterproofing System Product Description Pre-Bagged Structural Waterproofing
More informationSPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
More informationResurfacing Concrete. Page 1 of 5
Resurfacing Concrete Materials List QUIKRETE Concrete Resurfacer (No. 1131) (see calculator on page 5 for quantity needed) QUIKRETE Concrete and Stucco Wash (No. 8601) QUIKRETE Concrete Sealer (No. 8800)
More informationBBA BRITISH. tanking. Application. Storage & Handling
58 Visqueen Self Adhesive Damp Proof Membrane 60 Visqueen Gas Resistant Self Adhesive Damp Proof Membrane 62 Visqueen Torchon Tanking Membrane 64 Visqueen GX Pre Applied Membrane 66 Visqueen Protect&Drain
More informationHow to Install Hardwood Flooring Over a Sub Floor
How to Install Hardwood Flooring Over a Sub Floor Installation Preparation Instructions Read the entire instructions before starting your project. 1) INSPECT EACH PLANK (see fig. a) Wood is a natural product
More informationChapter 2 Basis of design and materials
Chapter 2 Basis of design and materials 2.1 Structural action It is necessary to start a design by deciding on the type and layout of structure to be used. Tentative sizes must be allocated to each structural
More informationRoofing. Sarnafil S 327-15EL. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 02.2015 Identification no: 02 09 01 01 201 0 150000 Version no. 04 Sarnafil S 327-15EL Polymeric membrane for roof waterproofing Product Description Sarnafil S 327-15EL
More informationRESTORATION + DECORATION OF BALCONIES AND TERRACES. Decorative, Easy to Maintain and Slip-Resistant Surfaces
RESTORATION + DECORATION OF BALCONIES AND TERRACES Decorative, Easy to Maintain and Slip-Resistant Surfaces BALCONIES AND THEIR LOADS For that extra bit of pleasure, the Remmers Balcony and Terrace Programme
More informationconstructive solutions Fosroc total waterproofing protection of below-ground structures
constructive solutions Fosroc total waterproofing protection of below-ground structures Our profile Since the company s beginnings over 50 years ago, Fosroc has developed into an International leader in
More informationGigaCrete Specification PlasterMax
GigaCrete Inc. 6775 Speedway Blvd. Suite M105 Las Vegas, NV 89115 Ph (702) 643-6363 Fax (702) 643 1453 www.gigacrete.com GigaCrete Specification PlasterMax PlasterMax : Fire Rated Plaster for Direct Application
More informationEXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More informationRubber Lining for Projects
Rubber Lining for Projects Trelleborg Rubber Lining - the ONE safeguard for wear and corrosion protection Trelleborg Rubber Linings can be applied to many surfaces to significantly reduce abrasive wear,
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationArmanet BEKAERT. Armanet THE CONSTRUCTIVE IDEA. Render & plaster reinforcing mesh @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@ @@@
BEKAERT Armanet THE CONSTRUCTIVE IDEA Armanet Render & plaster reinforcing mesh Armanet Renovation Product specification Insulation Reinforcing Mesh Armanet is a heavily galvanized welded mesh used for
More informationAfter reading this lesson you will be able to: 12.3 IMPORTANCE OF ROOF 12.4 TYPES OF ROOF IN A HOUSE
86 :: Certificate in Construction Supervision (CIVIL) 12 ROOF 12.1 INTRODUCTION The structure provided to cover the house surface (floor) is known as roof. For different situation and requirement, it is
More informationSOLAR SOLUTIONS BONDED MOUNTING TECHNOLOGY. DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil
SOLAR BONDED MOUNTING TECHNOLOGY DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil ADDED VALUE BY BONDING OF MODULES TO MOUNTING SYSTEMS SUITABLE IN PRODUCTION AND ON-SITE NOWADAYS PHOTOVOLTAIC
More informationRelease: 1. CPCCWP3004A Apply waterproofing remedial processes
Release: 1 CPCCWP3004A Apply waterproofing remedial processes CPCCWP3004A Apply waterproofing remedial processes Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency
More information