Reliability testing conforms to IESNA LM80 Lumen maintenance test method. Binning parameters: Brightness, forward voltage, wavelength and chromaticity

Transcription

1 1 W High Power LED Features Small package with high efficiency ESD protection up to 8000V Soldering methods: SMT Moisture sensitivity level: 1 M3535 Reliability testing conforms to IESNA LM80 Lumen maintenance test method Binning parameters: Brightness, forward voltage, wavelength and chromaticity RoHS Compliance Applications General lighting Decorative and entertainment lighting Signal and symbol Agriculture Lighting Materials Part No. Material Chip Emitted Color InGaN Cool White TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 11

2 Absolute Maximum Ratings (Ta=25 C) Value Parameter Symbol Standard package High performance package Unit Max. DC Forward Current IF ma Max. DC Pulse Current (Duty 1KHz) IPulse 1000 ma Max. ESD Sensitivity ESD 8000 V Max. Junction Temperature Tj 125 C Operating Temperature Topr -40 ~ +100 C Storage Temperature Tstg -40 ~ +100 C Max. Soldering Temperature Tsol 260 C Thermal Resistance Rth 10~12 C/W Max. Allowable Reflow Cycle n/a 2 Cycles Notes: 1. This series LED is not designed for reverse bias used. Electro-Optical Characteristics (Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Condition Brightness (Note 1) Forward Voltage (Note 2) Φv VF Im IF =350mA Im IF =700mA V IF =350mA V IF =700mA Color Temperature CCT K Color Rending Index (Note 3) CRI IF =350mA Notes: 1. Luminous flux measurement tolerance: ±10%. 2. Forward Voltage measurement tolerance: ±0.1V. 3. Color Rending Index measurement tolerance: ±2 Page 2 of 11

3 Relative Intensity Normalized Luminous Flux Forward Current (ma) Relative Spectral Power Distribution Forward Voltage (V) 1 W High Power LED Typical Electro-Optical Characteristics Curves (Ta=25 C) Spectral Distribution Forward Voltage vs. Forward Current Wavelength (nm) Luminous Flux vs. Forward Current Forward Current (ma) Current Derating Curve for 800 ma Forward Current (ma) Ambient Temperature Ta ( C) Typical Representative Spatial Radiation Pattern Degree (2θ) Note: 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value, the tolerance is ±5 Page 3 of 11

4 Package Outline Dimensions (Unit=mm) Note: 1. The tolerances unless mentioned is ±0.15mm, Unit = mm. 2. Do not handle the device by the lens. Incorrect force applied to the lens may lead to failure of devices. 3. Thermal pad is electrically isolated from the Anode and Cathode contact pads. Page 4 of 11

5 Pad Configuration Page 5 of 11

6 Carrier Tape Dimensions (Unit=mm): Loaded quantity 400pcs per reel Note: The tolerances unless mentioned is ±0.1mm. Moisture Resistant Packaging Page 6 of 11

7 Reel Dimensions (Unit=mm): Note: 1. The tolerances unless mentioned is ±0.1mm, Unit = mm. Page 7 of 11

8 Ordering Information TP C B W R 3535 B H 1 1 Z TR70 Lead Free Tape & Reel 7=7 reel 0=400pcs per reel Factory Location Code CCT: 6500K Zener Diodes Code Power Dissipation Code Chip Count Code Heatsink Insulated Lambertain, 110 degrees Size Code in mm Dome Top Cool White Color Bottom Soldering PCB-Chip Bottom Taitron High Power LED Label Explanation CAT: Luminous Flux Rank HUE: Color Bin Rank REF: Forward Voltage Rank Page 8 of 11

9 Rank Combinations Cool White Bin Coordinates Cool White Bin Structure Note: 1. Color coordinates measurement allowance: ± Color bins are defined at IF =350mA. Page 9 of 11

10 Forward Voltage Bins Group Bin Code Min. Max. Unit Condition U C V V V IF=350mA V Luminous Flux Bins Group Bin Code Min. Max. Unit Condition J lm IF=350mA lm IF=700mA Note: 1. Forward Voltage measurement tolerance: ±0.1V. 2. Forward Voltage bins are defined at IF =350mA. Page 10 of 11

11 How to contact us US HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONENTS INCORPORATED TAIWAN, TAIPEI 6F., No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 23146, Taiwan R.O.C. Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA,1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: Fax: CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, , CHINA Page 11 of 11