Catalog # Project. Comments

Transcription

1 DESCRIPTION A LED module for use with separate control gear is suitable for field replacement. The light emitting surface when combined with primary optics produce diffuse light, ideal for downlighting and wall washing applications. Available in various CRI, CCT and lumen values. Use where color quality, consistency and optical control are required. Catalog # Project Comments Type Date Prepared By SPECIFICATION FEATURES Mechanical A Zhaga Book 3 compliant 50mm diameter LED module with 19mm light emitting surface (LES 19) intended to attach to the heat sink of the luminaire. Thermal Interface Material Use with thermal grease (provided) to insure effective heat transfer between the LED module and heat sink. Electrical Interface Integral 2-pin connector provides power to the LED array and mounts to the heat sink assembly. Optical A high density LED array comprised of multiple die on a ceramic substrate (COB) with proximity phosphors providing a uniform source without pixilation. Available in 2700, 3000, 3500 and 4000 K in CRI 80, CRI 90 and CRI 97 (2700K, 3000K only) (minimum) with R9 values above 95. Refer to ordering table for available CRI/CCT combinations. Color accuracy within 2 SDCM initial and 3 SDCM at rated life provides excellent color uniformity and stability unit to unit and over time. Luminous Flux Delivered module lumens are dependent on various factors including CRI, CCT, driver current and thermal droop. All measurements are based on given drive current and tested in situ at 85 C. Compliance culus recognized and suitable for damp locations. CE and ENEC marked. Class 2 input only. Lumen maintenance projections in accordance with IES LM and TM Zhaga compliant. Warranty 10 year manufacturer warranty when used in approved luminaires. ZLM LED Module 50mm Diameter LES 19 4,000 Lumen Bridgelux Vero & Décor Series 2" [50mm] 1/8" [4mm] 3/4" [19mm] 1-3/8" [35mm] is a founding member of the Zhaga Consortium

2 ORDERING INFORMATION Example: Configuration LES Luminous Flux CRI/CCT ZLM03 19 ZLM03 = LED module, Zhaga Book 3 compatible 19 = 19mm light emitting surface 40 = 4,000 lumen series V827 = 80 CRI minimum, 2700 K CCT V830 = 80 CRI minimum, 3000 K CCT V835 = 80 CRI minimum, 3500 K CCT V840 = 80 CRI minimum, 4000 K CCT V927 = 90 CRI minimum, 2700 K CCT V930 = 90 CRI minimum, 3000 K CCT V935 = 90 CRI minimum, 3500 K CCT V940 = 90 CRI minimum, 4000 K CCT D927 = 97 CRI minimum, 2700 K CCT D930 = 97 CRI minimum, 3000 K CCT Catalog Number Drive Current Luminous Flux Category Luminous Flux CCT CRI LES Minimum Maximum Nominal Category Light Emitting Surface ZLM031940V K ZLM031940V K ZLM031940V K 80 ZLM031940V K ZLM031940V K ZLM031940V K ZLM031940V K 90 LES mm ZLM031940V K ZLM031940D K ZLM031940D K 97 SPECTRAL POWER DISTRIBUTION ZLM031940V

3 ZLM031940V ZLM031940V

4 ZLM031940V ZLM031940V

5 ZLM031940V ZLM031940V

6 ZLM031940V ZLM031940D

7 SPECTRAL POWER DISTRIBUTION ZLM031940D Color over angle also within xx SDCM.