Introduction to Abaqus/Standard and Abaqus/Explicit 6.14
|
|
|
- Maria Pope
- 7 years ago
- Views:
Transcription
1 Introduction to Abaqus/Standard and Abaqus/Explicit 6.14
2 About this Course Course objectives Upon completion of this course you will be able to: Complete finite element models using Abaqus keywords. Submit and monitor analysis jobs. View and evaluate simulation results. Solve structural analysis problems using Abaqus/Standard and Abaqus/Explicit, including the effects of material nonlinearity, large deformation and contact. Targeted audience Simulation Analysts Prerequisites None 3 days
3 Day 1 Lesson 1 Defining an Abaqus Model Workshop 1 Basic Input and Output Lesson 2 Linear Static Analysis Workshop 2 Linear Static Analysis of a Cantilever Beam: Multiple Load Cases Lesson 3 Nonlinear Analysis in Abaqus/Standard Workshop 3 Nonlinear Statics
4 Day 2 Lesson 4 Multistep Analysis in Abaqus Workshop 4 Unloading Analysis Lesson 5 Constraints and Contact Workshop 5 Seal Contact Lesson 6 Introduction to Dynamics Workshop 6 Dynamics
5 Day 3 Lesson 7 Using Abaqus/Explicit Workshop 7 Contact with Abaqus/Explicit Lesson 8 Quasi-Static Analysis in Abaqus/Explicit Workshop 8 Quasi-Static Analysis (Optional) Lesson 9 Combining Abaqus/Standard & Abaqus/Explicit Workshop 9 Import Analysis (Optional)
6 Additional Material Appendix 1 Appendix 2 Appendix 3 Element Selection Criteria Contact Issues Specific to Abaqus/Standard Contact Issues Specific to Abaqus/Explicit
7 Join the Community!
8 Legal Notices The Abaqus Software described in this documentation is available only under license from Dassault Systèmes or its subsidiary and may be used or reproduced only in accordance with the terms of such license. This documentation and the software described in this documentation are subject to change without prior notice. Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any errors or omissions that may appear in this documentation. No part of this documentation may be reproduced or distributed in any form without prior written permission of Dassault Systèmes or its subsidiary. Dassault Systèmes, 2014 Printed in the United States of America. Abaqus, the 3DS logo, SIMULIA, and CATIA are trademarks or registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries. Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal Notices in the Abaqus 6.14 Installation and Licensing Guide.
9 Revision Status Lesson 1 5/14 Updated for 6.14 Lesson 2 5/14 Updated for 6.14 Lesson 3 5/14 Updated for 6.14 Lesson 4 5/14 Updated for 6.14 Lesson 5 5/14 Updated for 6.14 Lesson 6 5/14 Updated for 6.14 Lesson 7 5/14 Updated for 6.14 Lesson 8 5/14 Updated for 6.14 Lesson 9 5/14 Updated for 6.14 Workshop 1 5/14 Updated for 6.14 Workshop 2 5/14 Updated for 6.14 Workshop 3 5/14 Updated for 6.14 Workshop 4 5/14 Updated for 6.14 Workshop 5 5/14 Updated for 6.14 Workshop 6 5/14 Updated for 6.14 Workshop 7 5/14 Updated for 6.14 Workshop 8 5/14 Updated for 6.14 Workshop 9 5/14 Updated for 6.14 Appendix 1 5/14 Updated for 6.14 Appendix 2 5/14 Updated for 6.14 Appendix 3 5/14 Updated for 6.14
10 Lesson 1: Defining an Abaqus Model L1.1 Lesson content: Introduction Documentation Learning Community Components of an Abaqus Model Details of an Abaqus Input File Abaqus Input Conventions Abaqus Output Example: Cantilever Beam Model Parts and Assemblies (optional) Workshop Preliminaries Workshop 1: Basic Input and Output (IA) Workshop 1: Basic Input and Output (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
11 Lesson 2: Linear Static Analysis L2.1 Lesson content: Linear and Nonlinear Procedures Linear Static Analysis and Multiple Load Cases Multiple Load Case Usage Examples Workshop 2: Linear Static Analysis of a Cantilever Beam (IA) Workshop 2: Linear Static Analysis of a Cantilever Beam (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
12 Lesson 3: Nonlinear Analysis in Abaqus L3.1 Lesson content: Nonlinearity in Structural Mechanics Equations of Motion Nonlinear Analysis Using Implicit Methods Nonlinear Analysis Using Explicit Methods Input File for Nonlinear Analysis Status File Message File Output from Nonlinear Cantilever Beam Analysis Workshop 3: Nonlinear Statics (IA) Workshop 3: Nonlinear Statics (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
13 Lesson 4: Multistep Analysis in Abaqus L4.1 Lesson content: Multistep Analyses Restart Analysis in Abaqus Workshop 4: Unloading Analysis (IA) Workshop 4: Unloading Analysis (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 1 hour
14 Lesson 5: Constraints and Contact L5.1 Lesson content: Constraints Tie Constraints Rigid Bodies Shell-to-solid Coupling Contact Defining General Contact Defining Contact Pairs Contact Pair Surfaces Local Surface Behavior Relative Sliding of Points in Contact Adjusting Initial Nodal Locations for Contact Contact Output Workshop 5: Seal Contact (IA) Workshop 5: Seal Contact (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2.5 hours
15 Lesson 6: Introduction to Dynamics L6.1 Lesson content: What Makes a Problem Dynamic? Equations for Dynamic Problems Linear Dynamics Nonlinear Dynamics Comparing Abaqus/Standard and Abaqus/Explicit Nonlinear Dynamics Example Workshop 6: Dynamics (IA) Workshop 6: Dynamics (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
16 Lesson 7: Using Abaqus/Explicit L7.1 Lesson content: Overview of the Explicit Dynamics Procedure Abaqus/Explicit Syntax Rigid Bodies Workshop 7: Contact with Abaqus/Explicit (IA) Workshop 7: Contact with Abaqus/Explicit (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
17 Lesson 8: Quasi-Static Analysis in Abaqus/Explicit L8.1 Lesson content: Introduction Solution Strategies Quasi-Static Simulations Using Explicit Dynamics Energy Balance Example: Load Rates Example: Mass Scaling Adaptive Meshing Workshop 8: Quasi-Static Analysis (IA) Workshop 8: Quasi-Static Analysis (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 2 hours
18 Lesson 9: Combining Abaqus/Standard & Abaqus/Explicit L9.1 Lesson content: Introduction Abaqus Usage Springback Calculation using Abaqus/Standard Workshop 9: Import Analysis (IA) Workshop 9: Import Analysis (KW) Both interactive (IA) and keywords (KW) versions of the workshop are provided. Complete only one. 1 hour
19 Appendix 1: Element Selection Criteria A1.1 Appendix content: Elements Structural (Shells and Beams) vs. Continuum Elements Modeling Bending Using Continuum Elements Stress Concentrations Contact Incompressible Materials Mesh Generation Solid Element Selection Summary 1.5 hours
20 Appendix 2: Contact Issues Specific to Abaqus/Standard A2.1 Appendix content: Contact as Part of the Model Definition Mesh Density Considerations Contact Logic in Abaqus/Standard 30 minutes
21 Appendix 3: Contact Issues Specific to Abaqus/Explicit A3.1 Appendix content: Contact Pairs as Part of the History Data Enforcing the Contact Constraints Double-Sided Contact Initial Kinematic Compliance 30 minutes
Heat Transfer and Thermal-Stress Analysis with Abaqus
Heat Transfer and Thermal-Stress Analysis with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Perform steady-state and transient heat transfer simulations
Linear Dynamics with Abaqus
Linear Dynamics with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Extract eigenmodes about a certain frequency Determine whether the number of extracted
FSI Simulation with Abaqus and Third-party CFD Codes 6.14
FSI Simulation with Abaqus and Third-party CFD Codes 6.14 About this Course Course objectives Upon completion of this course you will be able to: Evaluate FSI applications Create compatible FE and CFD
Modeling Stents Using Abaqus
Day 1 Lecture 1 Introduction Lecture 2 Geometry and Meshing Lecture 3 Element Selection and Mesh Convergence Workshop 1a Balloon-expanded stent geometry and meshing Workshop 1b Self-expanding stent geometry
Abaqus Technology Brief. Automobile Roof Crush Analysis with Abaqus
Abaqus Technology Brief Automobile Roof Crush Analysis with Abaqus TB-06-RCA-1 Revised: April 2007. Summary The National Highway Traffic Safety Administration (NHTSA) mandates the use of certain test procedures
Shell Elements in ABAQUS/Explicit
ABAQUS/Explicit: Advanced Topics Appendix 2 Shell Elements in ABAQUS/Explicit ABAQUS/Explicit: Advanced Topics A2.2 Overview ABAQUS/Explicit: Advanced Topics ABAQUS/Explicit: Advanced Topics A2.4 Triangular
B.1 Installation Overview
Appendix B: Installing Abaqus for CATIA V5 This appendix describes the installation of Abaqus for CATIA V5 and provides detailed information on Abaqus for CATIA V5 licensing. The appendix also describes
Nonlinear Analysis Using Femap with NX Nastran
Nonlinear Analysis Using Femap with NX Nastran Chip Fricke, Principal Applications Engineer, Agenda Nonlinear Analysis Using Femap with NX Nastran Who am I? Overview of Nonlinear Analysis Comparison of
Estimating Acoustic Performance of a Cell Phone Speaker Using Abaqus
Estimating Acoustic Performance of a Cell Phone Speaker Using Abaqus C. Jackman 1, M. Zampino 1 D. Cadge 2, R. Dravida 2, V. Katiyar 2, J. Lewis 2 1 Foxconn Holdings LLC 2 DS SIMULIA Abstract: Consumers
New design of a pressure vessel subjected to blast loads
New design of a pressure vessel subjected to blast loads L.Cousin, P.Evrard CEA, DAM, DIF, F91297 Arpajon, France Abstract: A new design of containment vessel has been proposed to conduct confined detonation
Finite Element Method (ENGC 6321) Syllabus. Second Semester 2013-2014
Finite Element Method Finite Element Method (ENGC 6321) Syllabus Second Semester 2013-2014 Objectives Understand the basic theory of the FEM Know the behaviour and usage of each type of elements covered
Strip Flatness Prediction in a 4 High Tandem Mill Using a Dynamic Model.
Strip Flatness Prediction in a 4 High Tandem Mill Using a Dynamic Model. M. A. Bello-Gomez 1, M. P. Guerrero-Mata 1, L. A. Leduc Lezama 1, T. P. Berber- Solano 1, L. Nieves 2, F. Gonzalez 2, H. R. Siller
Finite Element Methods (in Solid and Structural Mechanics)
CEE570 / CSE 551 Class #1 Finite Element Methods (in Solid and Structural Mechanics) Spring 2014 Prof. Glaucio H. Paulino Donald Biggar Willett Professor of Engineering Department of Civil and Environmental
NUARB TRAINING ACADEMY
NUARB TRAINING ACADEMY NUARB TRAINING ACADEMY Adding value to your people COPYRIGHT: The course materials are protected by Copyright laws and may not be reproduced or distributed without consent by NUARB
Structural Analysis - II Prof. P. Banerjee Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 02
Structural Analysis - II Prof. P. Banerjee Department of Civil Engineering Indian Institute of Technology, Bombay Lecture - 02 Good morning. Today is the second lecture in the series of lectures on structural
Design & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
Tower Cross Arm Numerical Analysis
Chapter 7 Tower Cross Arm Numerical Analysis In this section the structural analysis of the test tower cross arm is done in Prokon and compared to a full finite element analysis using Ansys. This is done
Deployment of a Self-expanding Stent in an Artery
Deployment of a Self-expanding Stent in an Artery Santosh Prabhu*, Chris Feezor*, Andy Denison*, Nuno Rebelo** and Mouhsine Serrar** * Guidant Corporation 3200 Lakeside Drive Santa Clara, CA 95054 and
CHAPTER 4 4 NUMERICAL ANALYSIS
41 CHAPTER 4 4 NUMERICAL ANALYSIS Simulation is a powerful tool that engineers use to predict the result of a phenomenon or to simulate the working situation in which a part or machine will perform in
Plates and Shells: Theory and Computation - 4D9 - Dr Fehmi Cirak (fc286@) Office: Inglis building mezzanine level (INO 31)
Plates and Shells: Theory and Computation - 4D9 - Dr Fehmi Cirak (fc286@) Office: Inglis building mezzanine level (INO 31) Outline -1-! This part of the module consists of seven lectures and will focus
ANALYTICAL AND EXPERIMENTAL EVALUATION OF SPRING BACK EFFECTS IN A TYPICAL COLD ROLLED SHEET
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 1, Jan-Feb 2016, pp. 119-130, Article ID: IJMET_07_01_013 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=1
Back to Elements - Tetrahedra vs. Hexahedra
Back to Elements - Tetrahedra vs. Hexahedra Erke Wang, Thomas Nelson, Rainer Rauch CAD-FEM GmbH, Munich, Germany Abstract This paper presents some analytical results and some test results for different
OpenFOAM Optimization Tools
OpenFOAM Optimization Tools Henrik Rusche and Aleks Jemcov h.rusche@wikki-gmbh.de and a.jemcov@wikki.co.uk Wikki, Germany and United Kingdom OpenFOAM Optimization Tools p. 1 Agenda Objective Review optimisation
List of Problems Solved Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p.
Preface p. v List of Problems Solved p. xiii Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p. 6 Assembly of the Global System of Equations p.
SOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION GET ENGINEERING INSIGHTS WITH VIRTUAL SIMULATION SOPHISTICATED SIMULATION IS NO LONGER JUST FOR SPECIALISTS Concurrent Engineering for more informed design SOLIDWORKS Simulation gives
COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS
International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 7, Issue 2, March-April 2016, pp. 30 52, Article ID: IJARET_07_02_004 Available online at http://www.iaeme.com/ijaret/issues.asp?jtype=ijaret&vtype=7&itype=2
EFFICIENT NUMERICAL SIMULATION OF INDUSTRIAL SHEET METAL BENDING PROCESSES
ECCOMAS Congress 06 VII European Congress on Computational Methods in Applied Sciences and Engineering M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) Crete Island, Greece, 5 0 June 06
Lap Fillet Weld Calculations and FEA Techniques
Lap Fillet Weld Calculations and FEA Techniques By: MS.ME Ahmad A. Abbas Sr. Analysis Engineer Ahmad.Abbas@AdvancedCAE.com www.advancedcae.com Sunday, July 11, 2010 Advanced CAE All contents Copyright
Automotive Brake Squeal Analysis Using a Complex Modes Approach
Abaqus Technology Brief TB-05-BRAKE-1 Revised: April 2007. Automotive Brake Squeal Analysis Using a Complex Modes Approach Summary A methodology to study friction-induced squeal in a complete automotive
SOLIDWORKS SOFTWARE OPTIMIZATION
W H I T E P A P E R SOLIDWORKS SOFTWARE OPTIMIZATION Overview Optimization is the calculation of weight, stress, cost, deflection, natural frequencies, and temperature factors, which are dependent on variables
Finite Element Formulation for Plates - Handout 3 -
Finite Element Formulation for Plates - Handout 3 - Dr Fehmi Cirak (fc286@) Completed Version Definitions A plate is a three dimensional solid body with one of the plate dimensions much smaller than the
Finite Element Formulation for Beams - Handout 2 -
Finite Element Formulation for Beams - Handout 2 - Dr Fehmi Cirak (fc286@) Completed Version Review of Euler-Bernoulli Beam Physical beam model midline Beam domain in three-dimensions Midline, also called
Leveraging Windows HPC Server for Cluster Computing with Abaqus FEA
Leveraging Windows HPC Server for Cluster Computing with Abaqus FEA This white paper outlines the benefits of using Windows HPC Server as part of a cluster computing solution for performing realistic simulation.
Graduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim
Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Joel Tollefson Imagine Inc. Aerospace Business Development Hans Van den Wijngaert LMS Product Manager Motion
CRASH ANALYSIS OF AN IMPACT ATTENUATOR FOR RACING CAR IN SANDWICH MATERIAL
F2008-SC-016 CRASH ANALYSIS OF AN IMPACT ATTENUATOR FOR RACING CAR IN SANDWICH MATERIAL Boria, Simonetta *, Forasassi, Giuseppe Department of Mechanical, Nuclear and Production Engineering, University
Filament Wound Composite Pressure Vessel Analysis with Abaqus
Abaqus Technology Brief TB-05-FWC-2 Revised: April 2007. Filament Wound Composite Pressure Vessel Analysis with Abaqus Summary Filament winding has become a popular construction technique in a wide variety
Chapter. 4 Mechanism Design and Analysis
Chapter. 4 Mechanism Design and Analysis 1 All mechanical devices containing moving parts are composed of some type of mechanism. A mechanism is a group of links interacting with each other through joints
Structural Axial, Shear and Bending Moments
Structural Axial, Shear and Bending Moments Positive Internal Forces Acting Recall from mechanics of materials that the internal forces P (generic axial), V (shear) and M (moment) represent resultants
Ammunition Dynamics in Rapid Fire Guns using MSC Adams
Ammunition Dynamics in Rapid Fire Guns using MSC Adams Jerry Browne General Dynamics Armament and Technical Products Abstract Ammunition Dynamics in Rapid Fire Guns Using MSC Adams Presentation Number
Modeling of concrete for nonlinear analysis Using Finite Element Code ABAQUS
Moding of concrete for nonlinear analysis Using Finite Element Code ABAQUS S.V.Chaudhari Department of Applied Sciences & Humanities. Rajiv Gandhi institute of Technology, Andheri(W),Mumbai,India M.A.Chakrabarti
Pre-requisites 2012-2013
Pre-requisites 2012-2013 Engineering Computation The student should be familiar with basic tools in Mathematics and Physics as learned at the High School level and in the first year of Engineering Schools.
A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior
A Study of Durability Analysis Methodology for Engine Valve Considering Head Thermal Deformation and Dynamic Behavior Kum-Chul, Oh 1, Sang-Woo Cha 1 and Ji-Ho Kim 1 1 R&D Center, Hyundai Motor Company
CAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping Lecture 3b CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 16, 2007 Numerical Methods Finite Element Method Boundary Element Method
Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu
Computer Aided Design (CAD), ME 530.414, JHU Professor Dan Stoianovici, dss@jhu.edu COURSE DESCRIPTION: The course outlines modern solid modeling design, analysis, simulation, and manufacturing of mechanical
Material Damage and Failure
ABAQUS/Exicit Advanced Topics Lecture 9 Material Damage and Failure ABAQUS/Exicit Advanced Topics L9.2 Overview Progressive Damage and Failure Damage Initiation for Ductile Metals Damage Evolution Element
Thermo-Mechanical Coupled Simulation with LS-DYNA
DYNAmore GmbH Industriestraße 2, D-70565 Stuttgart andrea.erhart@dynamore.de www.dynamore.de Ingenieurbüro Tobias Loose Herdweg 13, D-75045 Wössingen Lkr. Karlsruhe loose@tl-ing.de www.loose.at Thermo-Mechanical
Linear Static Analysis of a Cantilever Beam Using Beam Library (SI Units)
APPENDIX A Linear Static Analysis of a Cantilever Beam Using Beam Library (SI Units) Objectives: Create a geometric representation of a cantilever beam. Use the geometry model to define an MSC.Nastran
Powering up your ENERGY business processes
Powering up your ENERGY business processes Powering up your ENERGY business processes In these diffi cult economic times where ecological concerns are rapidly increasing, companies race to optimize performance
Caba3D. An Insight into Rolling Bearing Dynamics
Caba3D An Insight into Rolling Bearing Dynamics The Schaeffler Calculation Chain The perfect tools for systems with rolling bearings Commercial solutions: Finite element method multi-body simulation, etc.
Workshop. Tennis Racket Simulation using Abaqus
Introduction Workshop Tennis Racket Simulation using Abaqus In this workshop you will become familiar with the process of creating a model interactively by using Abaqus/CAE. You will create the tennis
CAD-BASED DESIGN PROCESS FOR FATIGUE ANALYSIS, RELIABILITY- ANALYSIS, AND DESIGN OPTIMIZATION
CAD-BASED DESIGN PROCESS FOR FATIGUE ANALYSIS, RELIABILITY- ANALYSIS, AND DESIGN OPTIMIZATION K.K. Choi, V. Ogarevic, J. Tang, and Y.H. Park Center for Computer-Aided Design College of Engineering The
Learning Module 6 Linear Dynamic Analysis
Learning Module 6 Linear Dynamic Analysis What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner
Finite Element Analysis of a Golf Driver and Golf Ball
Professor Suo 1/16 Solid Mechanics Finite Element Analysis of a Golf Driver and Golf Ball Abstract: This paper performs a theoretical stress and frequency analysis of both a 2D and 3D golf driver head
STRUCTURAL ANALYSIS SKILLS
STRUCTURAL ANALYSIS SKILLS ***This document is held up to a basic level to represent a sample for our both theoretical background & software capabilities/skills. (Click on each link to see the detailed
CFD modelling of floating body response to regular waves
CFD modelling of floating body response to regular waves Dr Yann Delauré School of Mechanical and Manufacturing Engineering Dublin City University Ocean Energy Workshop NUI Maynooth, October 21, 2010 Table
An Overview of the Finite Element Analysis
CHAPTER 1 An Overview of the Finite Element Analysis 1.1 Introduction Finite element analysis (FEA) involves solution of engineering problems using computers. Engineering structures that have complex geometry
(Seattle is home of Boeing Jets)
Dr. Faeq M. Shaikh Seattle, Washington, USA (Seattle is home of Boeing Jets) 1 Pre Requisites for Today s Seminar Basic understanding of Finite Element Analysis Working Knowledge of Laminate Plate Theory
FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS
FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS With Mathematica and MATLAB Computations M. ASGHAR BHATTI WILEY JOHN WILEY & SONS, INC. CONTENTS OF THE BOOK WEB SITE PREFACE xi xiii 1 FINITE ELEMENT
CAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 11, 2005 Plan for Today Hand Calculations Aero Æ Structures FEM Lecture (ca. 45 min)
ANALYSIS OF GASKETED FLANGES WITH ORDINARY ELEMENTS USING APDL CONTROL
ANALYSIS OF GASKETED FLANGES WITH ORDINARY ELEMENTS USING AP... Page 1 of 19 ANALYSIS OF GASKETED FLANGES WITH ORDINARY ELEMENTS USING APDL CONTROL Yasumasa Shoji, Satoshi Nagata, Toyo Engineering Corporation,
NUMERICAL SIMULATION OF FULL VEHICLE DYNAMIC BEHAVIOUR BASED ON THE INTERACTION BETWEEN ABAQUS/STANDARD AND EXPLICIT CODES
NUMERICAL SIMULATION OF FULL VEHICLE DYNAMIC BEHAVIOUR BASED ON THE INTERACTION BETWEEN ABAQUS/STANDARD AND EXPLICIT CODES E. Duni, G. Monfrino, R. Saponaro, M. Caudano and F. Urbinati FIAT Research Center,
State of Stress at Point
State of Stress at Point Einstein Notation The basic idea of Einstein notation is that a covector and a vector can form a scalar: This is typically written as an explicit sum: According to this convention,
Oracle Database 12c: Introduction to SQL Ed 1.1
Oracle University Contact Us: 1.800.529.0165 Oracle Database 12c: Introduction to SQL Ed 1.1 Duration: 5 Days What you will learn This Oracle Database: Introduction to SQL training helps you write subqueries,
AutoCAD 3D. MicroStation. Courseware Issued (Optional) AutoCAD (30 Days Trial Version) Reference Guide Project Workbook
2D CAD Introduction Isometric drawings File management Perspective drawings Orthographic drawings Annotations and Dimensions View management Team work Display management Layout management Layer management
CastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
Three dimensional thermoset composite curing simulations involving heat conduction, cure kinetics, and viscoelastic stress strain response
Three dimensional thermoset composite curing simulations involving heat conduction, cure kinetics, and viscoelastic stress strain response Harrison Poon, Seid Koric, M. Fouad Ahmad National Center for
Course in. Nonlinear FEM
Course in Introduction Outline Lecture 1 Introduction Lecture 2 Geometric nonlinearity Lecture 3 Material nonlinearity Lecture 4 Material nonlinearity continued Lecture 5 Geometric nonlinearity revisited
Introduction to Engineering System Dynamics
CHAPTER 0 Introduction to Engineering System Dynamics 0.1 INTRODUCTION The objective of an engineering analysis of a dynamic system is prediction of its behaviour or performance. Real dynamic systems are
Real Time Simulation for Off-Road Vehicle Analysis. Dr. Pasi Korkealaakso Mevea Ltd., May 2015
Real Time Simulation for Off-Road Vehicle Analysis Dr. Pasi Korkealaakso Mevea Ltd., May 2015 Contents Introduction Virtual machine model Machine interaction with environment and realistic environment
Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1
Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1 In this tutorial, we will use the SolidWorks Simulation finite element analysis (FEA) program to analyze the response
Application of LS-DYNA Implicit for the Design of Plastic Components
9. LS-DYNA Forum, Bamberg 2010 Application of LS-DYNA Implicit for the Design of Plastic Components Thomas Wimmer, Martin Fritz 4a engineering GmbH, Traboch - A Abstract: LS-Dyna is a common code in explicit
Influence of Crash Box on Automotive Crashworthiness
Influence of Crash Box on Automotive Crashworthiness MIHAIL DANIEL IOZSA, DAN ALEXANDRU MICU, GHEORGHE FRĂȚILĂ, FLORIN- CRISTIAN ANTONACHE University POLITEHNICA of Bucharest 313 Splaiul Independentei
Overview. Gaudi Design Tools. The Design Process. The Design Process. Overview. Target Audience
Overview Gaudi Design Tools Kyle, Eric, Emily & Barb The Design Process Target Audience Our Demands Rule Sets System Diagram Other The Design Process 1. Programming relationship to site 2. Conceptual Design
Modeling Beams on Elastic Foundations Using Plate Elements in Finite Element Method
Modeling Beams on Elastic Foundations Using Plate Elements in Finite Element Method Yun-gang Zhan School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang,
High-end FEA pre/postprocessor
Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall
Fatigue Analysis and Optimization of Flexible Printed Circuits
Fatigue Analysis and Optimization of Flexible Printed Circuits Alexander Ptchelintsev Nokia Research Center P.O. Box 407, FI-00045 NOKIA GROUP, Finland Email: alexander.ptchelintsev@nokia.com Abstract:
LMS Virtual.Lab Realistic Simulation in CATIA V5. Why CAE? Design-Right/First-Time
LMS Virtual.Lab Realistic Simulation in CATIA V5 Why CAE? Design-Right/First-Time LMS Company Background Three Primary Business Areas 2 LMS Engineering Engineering Consulting and Test Services 1 LMS Research
Benchmark Tests on ANSYS Parallel Processing Technology
Benchmark Tests on ANSYS Parallel Processing Technology Kentaro Suzuki ANSYS JAPAN LTD. Abstract It is extremely important for manufacturing industries to reduce their design process period in order to
ICTICT403 Apply software development methodologies
ICTICT403 Apply software development Release: 1 ICTICT403 Apply software development Modification History Release Release 1 Comments This version first released with ICT Information and Communications
Adams 2014. Geometric Nonlinearity via Adams FE Part - Fully Integrated Inside Adams RELEASE OVERVIEW. MSC Software: Release Overview - Adams 2014
Continuous Stress/Strain/Deformation Position/Velocity/Acceleration + Centerline, Angle, Sections, Distributed loads 2014 Geometric Nonlinearity via FE Part - Fully Integrated Inside 1) MBD System Model
Project Managing Microsoft Dynamics CRM Implementations
Workshop 80054A: Project Managing Microsoft Dynamics CRM Implementations with Microsoft Dynamics Sure Step Length: 2 Day(s) Published: November 12, 2008 Language(s): Audience(s): English Developers Level:
Generative Part Stress Analysis
Generative Part Stress Analysis Preface What's new? Getting Started Basic Tasks Workbench Description Glossary Index Dassault Systèmes 1994-99. All rights reserved. Preface CATIA - Generative Part Structural
Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer
Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer 1 Tablets in our daily lives Tablets are very entertaining, stylish and powerful Shopping, reading,
innovative solutions for durability and fatigue pre- & post-processing ANSA μετα p i o n e e r i n g software systems www.beta-cae.
ANSA μετα p i o n e e r i n g software systems innovative solutions for durability and fatigue pre- & post-processing TM www.beta-cae.gr ANSA is the only pre-processor capable of increasing the efficiency
NUMERICAL SIMULATION OF REGULAR WAVES RUN-UP OVER SLOPPING BEACH BY OPEN FOAM
NUMERICAL SIMULATION OF REGULAR WAVES RUN-UP OVER SLOPPING BEACH BY OPEN FOAM Parviz Ghadimi 1*, Mohammad Ghandali 2, Mohammad Reza Ahmadi Balootaki 3 1*, 2, 3 Department of Marine Technology, Amirkabir
Topology optimization based on graph theory of crash loaded flight passenger seats
7. LS-DYNA Anwenderforum, Bamberg 2008 Optimierung III Topology optimization based on graph theory of crash loaded flight passenger seats Axel Schumacher, Christian Olschinka, Bastian Hoffmann Hamburg
CONTRIBUTION TO THE IAEA SOIL-STRUCTURE INTERACTION KARISMA BENCHMARK
CONTRIBUTION TO THE IAEA SOIL-STRUCTURE INTERACTION KARISMA BENCHMARK Presented by F. Wang (CEA, France), CLUB CAST3M 2013 28/11/2013 5 DÉCEMBRE 2013 CEA 10 AVRIL 2012 PAGE 1 CONTRIBUTION TO THE IAEA SSI
Finite Element Method
16.810 (16.682) Engineering Design and Rapid Prototyping Finite Element Method Instructor(s) Prof. Olivier de Weck deweck@mit.edu Dr. Il Yong Kim kiy@mit.edu January 12, 2004 Plan for Today FEM Lecture
Mechanical Analysis of Crossbeam in a Gantry Machine Tool and its Deformation Compensation
Send Orders for Reprints to reprints@benthamscience.ae The Open Mechanical Engineering Journal, 2015, 9, 213-218 213 Open Access Mechanical Analysis of Crossbeam in a Gantry Machine Tool and its Deformation
Improving Interoperability in Mechatronic Product Developement. Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic
International Conference on Product Lifecycle Management 1 Improving Interoperability in Mechatronic Product Developement Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic PROSTEP AG Dolivostr.
Liquid Hydrogen Pressure Vessel Analysis
OAK RIDGE NATIONAL LABORATORY Liquid Hydrogen Pressure Vessel Analysis Claire R. Luttrell 9/18/2007 1.0 INTRODUCTION An SNS experiment is being designed that includes a 20 liter liquid hydrogen (LH2) target.
Benchmark Test Reveals Best CAD Tool for Assembly Performance
Benchmark Test Reveals Best CAD Tool for Assembly Performance Speed is everything in product development, especially when it comes to creating and managing large assemblies. And while some 3D CAD vendors
Co-Simulation and modal reduction for multifield problems in multibody dynamics
Co-Simulation and modal reduction for multifield problems in multibody dynamics 7th Workshop on Descriptor Systems March 2005, Paderborn Martin Arnold [martin.arnold@mathematik.uni-halle.de] Martin Luther
Eulerian-Domain shape optimization for airbag deployment
Eulerian-Domain shape optimization for airbag deployment Jean-Jacques Bernies, Michael Wick, Norbert-Attila Ionas, Nicolas Bonnin, Dr. Doris Ruckdeschel Affiliation of Authors Abstract: The Coupling-Eulerian-Lagrange
METHODS FOR ACHIEVEMENT UNIFORM STRESSES DISTRIBUTION UNDER THE FOUNDATION
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 2, March-April 2016, pp. 45-66, Article ID: IJCIET_07_02_004 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=2
Performance Comparison of ISV Simulation Codes on Microsoft Windows HPC Server 2008 and SUSE Linux Enterprise Server 10.2
Fraunhofer Institute for Algorithms and Scientific Computing SCAI Performance Comparison of ISV Simulation Codes on Microsoft HPC Server 28 and SUSE Enterprise Server 1.2 Karsten Reineck und Horst Schwichtenberg
Dynamic Load and Stress Analysis of a Crankshaft
27-1-28 Dynamic Load and Stress Analysis of a Crankshaft Farzin H. Montazersadgh and Ali Fatemi The University of Toledo Copyright 27 SAE International ABSTRACT In this study a dynamic simulation was conducted
Putting into Practice Surface Modeling Exercise Using Kayak Project: Experience with Advanced CATIA Course
Putting into Practice Surface Modeling Exercise Using Kayak Project: Experience with Advanced CATIA Course Eric Leonhardt and Veekit O Charoen Department of Engineering Technology Western Washington University,
Analysis of Mobile Phone Reliability Based on Active Disassembly Using Smart Materials *
Journal of Surface Engineered Materials and Advanced Technology, 2011, 1, 80-87 doi:10.4236/jsemat.2011.12012 Published Online July 2011 (http://www.scirp.org/journal/jsemat) Analysis of Mobile Phone Reliability