ZIP M ACHINE TOOL AC C E S S O R I E S

Transcription

1 ZIP M ACHINE TOOL AC C E S S O R I E S T SLOT S, HEX NUTS, WASHERS, T SLOT NUTS, STUDS, WEDGES, STEP BLOCKS, EXTENSION NUTS, CLAMPS, FLANGED HEX NUTS, EYE S Essential Components for Speeding Up Production. Save Time and Delay. CARRIED IN STOCK IMMEDIATE DELIVERY ANY QUANTITIES PACKAGED FOR YOUR CONVENIENCE ZIP MACHINE TABLE T S L OT S HOT FORGED FROM C-1045 STEEL CLASS 3 N.C. FULL SMOOTH CUT THREADS *Cat. No. Eample 3/8 2 = ESPECIALLY MADE FOR MACHINE TOOL TABLES. CANNOT TWIST OR JAM IN SLOTS. *CAT. NO. *10 *11 *12 *13 *14 *15 *16 *17 *18 *19 *20 *21 *22 *23 *24 *25 *26 *27 *28 *29 *30 *31 *32 *33 *34 *35 *CATALOG NO. *100 *200 *300 *400 *500 *600 *700 *800 SLOT SIZE 3/8 1/2 5/8 3/4 7/8 7/8 1 1 SHANK DIAMETER 3/8-16 1/2-13 5/8-11 3/4-10 3/4-10 7/8-9 7/ LENGTH UNDER HEAD 1 1-1/4 1-1/2 1-3/ /4 2-1/2 2-3/ / / / HEAD HEAD HEAD HEAD HEAD HEAD HEAD HEAD 11/16 WIDE 7/8 WIDE 1-3/32 WIDE 1-1/4 WIDE 1-1/2 WIDE 1-1/2 WIDE 1-3/4 WIDE 1-3/4 WIDE 3/16 9/32 11/32 7/16 9/16 9/16 5/8 5/8 Note: When ordering 7/8 and 1 bolts be sure to specify catalog number. Bolts can be heat treated to grade 5 at additional charge. METRIC SIZES AVAILABLE ON REQUEST. (OVER)

2 CAT. NO. *10 *11 *12 *13 *14 *15 *16 *17 *18 *19 *20 *21 *22 EXTRA THICK. MACHINED FROM 12L14 BAR STOCK. CASE HARDENED. EXTRA THICK. ALL MACHINED FROM COLD FINISHED 12L14 BAR STOCK. CASE HARDENED. FULL SMOOTH THREADS. WASHER BEARING SURFACE. EXTRA THICK. ALL MACHINED FROM COLD ROLLED 12L14 STEEL. BEVELED EDGE. SMALL ADDITIONAL CHARGE FOR CASE HARDENING, IF DESIRED. Inside diameter is 1/64 to 1/32 over size of bolt. FOR USE WITH ZIP STUDS ALL MACHINED FROM 12L14 COLD FINISHED HEX BAR STOCK. USED AS A COUPLING NUT WITH STUDS TO LENGTHEN S. EXTRA CHARGE FOR CASE HARDENING. *CAT. NO. *205 *305 *405 *505 *605 *705 *805 *905 LENGTH E ALL MACHINED FROM COLD FINISHED STEEL BAR STOCK. CASE HARDENED. OTHER SIZES ON REQUEST. CAT. NO. DIAMETER ZIP HEX NUTS FLATS THICKNESS / /16 7/ /2-13 7/8 5/ / /16 3/ / /4 7/ / /16 1-1/ /8 1-1/4 ZIP FLANGED HEX NUTS CAT. ACROSS O.A. WASHER NO. DIAMETER FLATS THICKNESS PORTION / /16 1/2 7/8 1/ /2-13 7/8 11/16 1-1/8 3/ / /16 13/16 1-1/4 1/ / / /2 1/ / /16 1-1/8 1-3/4 1/ /8 1-5/16 2 5/16 ZIP WASHERS CAT. OUTSIDE NO. DIAMETER DIAMETER THICKNESS /16 (#10) 1/2 3/ /4 5/8 1/ /16 3/4 1/ /8 7/8 1/ /16 1 5/ /2 1 3/ /8 1-1/4 1/ /4 1-1/2 1/ /8 1-3/4 1/ / /8 2-1/4 5/ /4 2-1/4 5/16 ZIP EXTENSION NUTS CAT. U.S.S. THREAD ACROSS NO. SIZE FLATS LENGTH /8-16 5/8 1-1/ /2-13 7/8 1-3/ / /16 2-1/ / /4 2-1/ / /16 2-5/ / / /16 3-1/ / /4 ZIP T SLOT NUTS SPECIFICATIONS NECK CAT. REF. STUD SIZE OF HEAD SIZE FOR NO. NO. SIZE B C D E SLOTS A /8-16 1/2 7/8 5/16 1 5/ /2-13 9/16 7/8 11/32 1-1/8 5/ /2-13 5/8 1-1/8 13/32 1-1/4 3/ / /16 1-1/8 7/16 1-1/4 3/ /8-11 3/4 1-1/4 17/32 1-1/2 7/ / /16 1-1/4 9/16 1-1/ /4-10 7/8 1-1/2 9/16 1-3/ / /4 11/16 1-5/8 1-1/ / /4 5/ / /4 2 7/8 2-1/2 1-1/ / /2 2-1/2 1-1/ /4 A Neck-Milled 1/32 under size ZIP DOUBLE END STEEL STUDS FOR USE WITH ZIP T SLOT NUTS MADE FROM HIGH QUALITY C-1038 STEEL, TENSILE STRENGTH 100,000 LBS. STUDS CAN BE HEAT TREATED TO GRADE 5 AT ADDITIONAL CHARGE. Cat. No. Eample 3/8 2 = DIAMETER DIAMETER DIAMETER 3/8-16 1/2-13 5/8-11 3/4-10 7/ / /4-7

3 ZIP MACHINE TOOL AC C E S S O R I E S ZIP SERRATED STEP BLOCKS 1 BLOCK = 2 PIECES Steel Black Oide Finish Adjustable in 1/8 Increments REF. CAT. CAPACITY OF HEIGHT OF NO. NO. FULL BLOCK 1/2 BLOCK STANDARD BLOCKS 1 WIDE 1-S /4 to 1-1/2 1-1/8 2-S /8 to 2-1/2 1-3/4 3-S /2 to 6 3-7/8 HEAVY DUTY BLOCKS 1-1/2 WIDE 4-S /2 to 3-3/4 2-3/8 5-S /2 to 6 3-7/8 6-S /2 to 9 5-1/2 DOUBLE DUTY BLOCKS 2 WIDE 7-S /2 to 3-3/4 2-3/8 8-S /2 to 6 3-7/8 9-S /2 to 9 5-1/2 ZIP SERRATED STEP CLAMPS REF. CAT. LENGTH WIDTH THICK- NO. NO. SIZE NESS 25-S /8 2-1/2 1 1/2 40-S / /8 60-S / /8 3/4 25-S /2 2-1/2 1-1/8 1/2 40-S / /4 3/4 60-S / /4 7/8 Heat Treated Steel Bar Black Oide Finish 25-S /8 2-1/2 1-1/4 5/8 40-S / /2 3/4 60-S / /2 7/8 40-S / /2 3/4 60-S / / S / /4 1-1/8 Step clamp teeth match all sizes of step blocks. ZIP PLAIN CLAMPS REF. CAT. LENGTH WIDTH THICK- NO. NO. SIZE NESS 25-P /8 2-1/2 1 1/2 40-P / /8 60-P / /8 3/4 Heat Treated Steel Bar Black Oide Finish 25-P /2 2-1/2 1-1/8 1/2 40-P / /4 3/4 60-P / /4 7/8 25-P /8 2-1/2 1-1/4 5/8 40-P / /2 3/4 60-P / /2 7/8 40-P / /2 3/4 60-P / / P / /4 1-1/8 TO BE DISCONTINUED, SUBSTITUTE #73903

4 ZIP MACHINE TOOL ACCESSORIES TOLL FREE FAX: Internet: ZIP WEDGES A MACHINE SHOP NECESSITY DROP FORGED C-1020/C-1030 STEEL CAT. REF. THICK LENGTH WIDTH NO. NO. END / / /4 1 USE WITH ZIP T-SLOT S C-1030 STEEL ZIP FORGED UNIVERSAL ADJUSTABLE STRAP CLAMPS MAX. T CAT. WIDTH ADJUST- LENGTH SLOT NO. INCHES MENT SIZE-INCHES WEIGHT /16 1-5/8 2-1/4 5/ /8 4 3/ /4 6-1/ C-1030 STEEL TO BE USED ON VERTICAL LIFTS. ON ANGULAR LIFTS USE WITH CAUTION. ZIP FORGED SHOULDER EYE S CAT. THREAD SHANK EYE NO. UNC-2A LENGTH I.D / / / / OTHER SIZES AVAILABLE SCRAP PILE METHODS ARE ELIMINATED WHEN SETTING UP JOBS ON THE PLANER ETC. QUALITY GREY IRON CASTING. ZIP FOUR-SIDED STEP BLOCKS CAT. REF. NUMBER BASE HEIGHT NO. NO. HEIGHTS MACHINED BASE TO BE DISCONTINUED WHEN STOCK EXPIRES.

5 ZIP MACHINE TOOL ACCESSORIES TOLL FREE FAX: Internet: ZIP DROP FORGED C-1030 STEEL CLAMPS ZIP FORGED U CLAMP CAT. LENGTH WIDTH NESS STUD LENGTH WEIGHT NO. INCHES INCHES INCHES SIZE INCHES LB /4 3/4 5/8 3-1/ /8 5/8 5-1/ /8 1-1/8 3/4 7-3/ /4 1-1/4 7/ /4 1-3/ ZIP FORGED GOOSE NECK CLAMP CAT. LENGTH WIDTH NESS STUD LENGTH OFFSET WEIGHT NO. INCHES INCHES INCHES SIZE INCHES INCHES LB /8 3/4 5/8 15/16 13/ /4 7/8 5/8 1-11/16 15/ /8 1-1/8 3/4 2-7/16 1-1/ ZIP FORGED PLAIN CLAMP CAT. LENGTH WIDTH NESS STUD LENGTH WEIGHT NO. INCHES INCHES INCHES SIZE INCHES LB /8 3/4 5/8 1-3/ /4 7/8 5/8 2-1/ /8 1-1/8 3/4 2-13/ /2 1-3/8 7/8 3-11/ ZIP FORGED FINGER CLAMP CAT. LENGTH WIDTH NESS STUD LENGTH WEIGHT NO. INCHES INCHES INCHES SIZE INCHES LB /8 3/4 5/8 1-3/ /4 7/8 5/8 1-15/ /8 1-1/8 3/4 2-9/ (TURN PAGE) USE WITH ZIP T-SLOT S OR ZIP STUDS.

6 ZIP T SLOT, NUT AND WASHER SET SET CONSISTS OF: 24 T SLOT S C1045 STEEL, HEAT TREATED 12 NUTS & WASHERS, HARDENED THIS HANDY HOLDER INSURES AGAINST LOSS OF S, NUTS AND WASHERS. A PLACE FOR EVERYTHING AND EVERYTHING IN ITS PLACE. THE RUGGED T SLOT ASSURES MAXIMUM CLAMPING POWER FOR HEAVY CUTS AT HIGH SPEED. ALWAYS DEPENDABLE, THEY ARE THE BACK BONE OF ANY MACHINE TOOL SET-UP. CAT. NO. REF.NO. SLOT SIZE SHANK SIZE LENGTH TB 3/8 3/8 2, 3, 4, 5, 6, TB 1/2 1/2 2, 3, 4, 5, 6, TB 5/8 5/8 2, 3, 4, 5, 6, TB 3/4 3/4 2, 3, 4, 5, 6, A TB 7/8 3/4 3, 4, 5, 6, 7, TB 7/8 7/8 3, 4, 5, 6, 7, A TB 1 7/8 3, 4, 5, 6, 7, TB 1 1 3, 4, 5, 6, 7, 8 ZIP T SLOT NUT AND STUD SET SET CONSISTS OF: 24 STUDS - C 1045 STEEL HEATTREATED 6 T SLOT NUTS, HARDENED 6 HEX NUTS AND WASHERS, HARDENED 4 COUPLING NUTS, HARDENED CUTS SET-UP TIME IN HALF. THE SET MOST DESIRED BY MACHINISTS. EVERY MACHINE SHOP SHOULD HAVE THIS HANDY STUD SET PLACED BY EACH MACHINE. EXPENSIVE MACHINE TOOLS NEED PROPER AND ACCURATE SET-UP TOOLING TO BE EFFECTIVE. CAT. NO. REF.NO. SLOT SIZE STUD SIZE LENGTH OF STUDS S 1/2 3/8 3, 4, 5, 6, 7, S 5/8 1/2 3, 4, 5, 6, 7, S 3/4 5/8 3, 4, 5, 6, 7, S 7/8 3/4 3, 4, 5, 6, 7, S 1 7/8 3, 4, 5, 6, 7, S 1-1/4 1 4, 5, 6, 7, 8, 9 REPLACEMENTS MAY BE ORDERED AT PRICES SHOWN ON CATALOG SHEETS.