Screws
|
|
- Calvin Snow
- 7 years ago
- Views:
Transcription
1 Screws www K Street Omaha, NE Phone: (402) Fax: (402) East Kansas Ave. Arkansas City, KS Phone: (620) Fax: (620) www. orders@ Jasper Street Kansas City, MO Phone: (816) Fax: (816) B-104 E. Chestnut Expwy. Springfield, MO Phone: (417) Fax: (417)
2 Table of Contents Categorized Listing Screws 1 ACCESSORIES 19 4-in-1 Screw Driver 19 Magnetic Hex Driver 19 Phillips Bits 20 Quick Change Magnetic Bit Holder 19 Slotted Bits 20 Spanner Bits 19 Square Drive Bit 20 Square Recess 20 Torx-Pin Bits 19 Tamper Proof 19 CONSTRUCTION SCREWS 9 Coarse Drywall Screw 9 Hex Head Slotted Tapmark Screw 9 Phillips Bugle Head Drywall Screw 9 Torx Head Multi-purpose Screw 9 Woodex Square Drive Screw 9 FLOOR SCREWS 10 Torx Drive Flat Head 10 Torx Drive Pan Head 10 Torx Drive Truss Head 10 PLATED LAG SCREWS 17 Hex Head 17 Shields 17 PLATED MACHINE SCREWS 11 Hex Head 13 K-Lok Nuts 16 Machine Nuts 16 Phillips Flat Head 14 Phillips Oval Head 15 Phillips Pan Head 13 Phillips Truss Head 13 Black Oxide 13 Slotted Flat Head 14 Slotted Oval Head 15 Slotted Pan Head 12 Slotted Round Head 11 Slotted Truss Head 13 Type P Plated Thumb Screw 15 Type S Plated Thumb Screw 15 SELF DRILLING SCREWS 6 Indented Hex Washer Head 6 Hex Indented Washer Head 7 With Neoprene Washer 7 Phillips Modified Truss Head 8 Phillips Oval Head Black 8 With Free Spinning Washer 8 Phillips Pan Head Zinc 8 Phillips Oval Head Zinc 8 Square Drive Pan Head 8 Wall Liner Screw Zinc 8 Zinc Yellow Plated 8 Wing Tek 8 TAPPING SCREWS 1 Hex Head Zinc 5 With Attached Washer Head 5 Phillips Flat Head Zinc 4 Phillips Oval Head Black 3 Phillips Oval Head Chrome 3 Phillips Oval Head Zinc 2 Phillips Pan Head Zinc 1 Phillips Pan Head Black 1 Phillips Truss Head Zinc 4 Phillips Washer Head Black 3 Rapid Penetrating Screws 5 Slotted Hex Washer Head 5 Truss Washer Head 5 Sems Flush Phillips Washer Head Black 5 Sems Phillips Washer Head Black 5 Sems Washer Head Chrome 5 Slotted Hex Head Zinc 4 Slotted Pan Head Zinc 2 Black 1 Square Pan Head 1 Torx Drive Truss Head Zinc 4 TYPE F THREAD CUTTING SCREWS 10 Hex Head Washer 10 Slotted Pan Head 10 Phillips Pan Head 10 WASHER 7 Neoprene (Bonded) 7 PLATED WOOD SCREWS 18 Slotted Flat Head 18 Phillips Flat Head 18 Slotted Round Head 18
3 Table of Contents Alphabetized Listing 1 1/4" Hex Shank Phillips-Slotted Combo Bit in-1 Screwdriver 19 A Accessories B Black Oxide 13 Black Phosphate 10 C Construction Screws 9 F Floor Screws 10 G Grade 5 Flat Washers 16 H Hex Head 13 Hex Head Slotted Tapmark Screw 9 Hex Head with Attached Washer 5 Hex Head Zinc 5 Hex Head Zinc Plated Lag Screw 17 Hex Indented Washer Head 7 Hex Washer Head 10 I Indented Hex Head with Neoprene Washer 7 Indented Hex Washer Head 6 K K Lock Nuts 16 L Lag Shields 17 Liner Screws Zinc Yellow Plated 8 M Machine Nuts 16 Machine Nuts and Plated Lag Screws 16 Magnetic Bit Holder 19 Magnetic Hex Driver 19 N Neoprene Washers 7 NUTS 16 P Phillips and Slotted Bits 20 Phillips Bugle Head Drywall Screw 9 Phillips Coarse Drywall Screw 9 Phillips Flat Head 10, 14, 18 Phillips Flat Head Deck Wood Screw 9 Phillips Flat Head Tapmark 9 Phillips Flat Head Zinc 4 Phillips Flat Top Washer Head Black 3 Phillips Modified Truss Black 8 Phillips Modified Truss Head 8 Phillips Oval Head 15 Phillips Oval Head Black 3, 8 Phillips Oval Head Chrome 3 Phillips Oval Head Zinc 2, 8 Phillips Pan Head 10, 13 Phillips Pan Head Black 1 Phillips Pan Head Zinc 1, 8 Phillips Truss Head 13 Phillips Truss Head Black 13 Phillips Truss Head Zinc 4 Phillips Truss Washer Head Zinc 5 Plated Machine Screws Plated Wood Screws 18 Q Quick Change Magnetic Bit Holder 19 R S T Rapid Penetrating Screws 5 Rapid Penetrating Screws and Floor Screws 5 SAE/UNF 16 SCREWS 1-20 Self Drilling Screws 6-8 Sems Flush Phillips Washer Head Black 5 Sems Phillips Washer Head Black 5 Sems Phillips Washer Head Chrome 5 Slotted Flat Head 14, 18 Slotted Hex Head Zinc 4 Slotted Hex Washer Head Zinc 5 Slotted Oval Head 15 Slotted Pan Head 10, 12 Slotted Pan Head Zinc 2 Slotted Round Head 11-12, 18 Slotted Truss Head 13 Spanner Bits 19 Square Drive Pan Head 8 Square Drive Screw Bit 20 Square Pan Head Zinc 1 Square Recess Power Bits 20 Tamper Proof 19 Tapping Screws 1-5 Torx Bits 19 Torx Drive Flat Head 10 Torx Drive Pan Head 10 Torx Drive Truss Head 4 Torx Head Multi-Purpose Screw 9 Type F Thread Cutting Screws 10 Type P Plated Thumb Screw 15 Type S Plated Thumb Screw 15 W Z Wall Liner Zinc 8 Washers 7 Washers and Nuts 16 Wing Tek Zinc 8 With Free Spinning Washer 8 Woodex Square Drive Screw 9 Zinc 8 Zinc Plated 4, 10
4 Notes
5 Phillips Pan Head Zinc / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 Tapping Screws / / / Square Pan Head Zinc / / / / / / / Phillips Pan Head Black / / / / / / / / / /4 1 SCREWS
6 SCREWS Slotted Pan Head Zinc / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 Tapping Screws / / / / / / / / / / Phillips Oval Head Zinc Head Size /2 # /2 # /4 # /4 # # # /2 # /2 # /4 # /4 # # /4 # /4 # /2 # /2 # /4 # # /2 # /2 # /8 # /8 # /8 # # /2 # /4 #10 2
7 Phillips Oval Head Chrome Head Size /8 # /2 # /8 # /4 # /8 # /8 # /2 # /8 # /4 # # /4 # /8 # /8 # /2 # /2 # /8 # /8 # /4 # /4 # /8 # /8 # # # /8 # /8 # /4 # /4 # /2 # /2 # /4 # /2 # /2 # /2 # /8 # /8 # /4 # /4 # /4 # # # # /8 # /4 # /4 # /4 # /2 # /4 #6 Tapping Screws Phillips Oval Head Black Head Size /2 # /4 # # /4 # /2 # /2 # /4 # /4 # # # /4 # /4 # /2 # /2 # /2 # /2 # /4 # /4 # # # /4 # /4 # /2 # /2 #10 Phillips Flat Top Washer Head Black / / / / / / / /4 SCREWS 3
8 SCREWS Torx Drive Truss Head Zinc Plated Tapping Screws Slotted Hex Head Zinc Torx Size /4 1-1/2 T /4 2 T /4 2-1/2 T-30 Phillips Truss Head Zinc / /4 Phillips Flat Head Zinc / / / / / / / / / / / / / / / / / / /2 Indented Hex Head Washer Face Hex Size /2 1/ /8 1/ /4 1/ / /2 1/ /8 1/ /2 1/ /8 1/ /4 1/ / /4 1/ /2 1/ / /8 5/ /2 5/ /8 5/ /4 5/ / /4 5/ /2 5/ / /2 5/ /8 5/ /4 5/ / /4 5/ /2 5/ / /2 3/ /4 3/ / /4 3/ /2 3/ /8 4
9 Hex Head with Attached Washer Hex Size /2 1/ /4 1/ / /4 1/ /2 1/ /2 5/ /4 5/ / /4 5/ /2 5/ /2 5/ /4 5/ / /4 5/ /2 5/ /2 3/ /4 3/ / /4 3/ /2 3/ /16 3/4 7/ /16 1 7/ /16 1-1/4 7/ /16 1-1/2 7/16 Tapping Screws Sems Phillips Washer Head Chrome / / / / /4 Sems Phillips Washer Head Black / / / / Sems Flush Phillips Washer Head Black SCREWS Hex Head Zinc *Hex Size Varies Hex Size /4 1/2 *3/8-7/ /4 3/4 *3/8-7/ /4 1 *3/8-7/ /4 1-1/4 *3/8-7/ /4 1-1/2 *3/8-7/ /4 2 *3/8-7/ /16 3/4 1/ /16 1 1/ /16 1-1/4 1/ /16 1-1/2 1/ /16 2 1/ /8 3/4 9/ /8 1 9/ /8 1-1/4 9/ /8 1-1/2 9/ /8 2 9/ / / / /4 Rapid Penetrating Screws Phillips Truss Washer Head Zinc Item ID Size Hex Size x1/2 8 Slotted Hex Washer Head Zinc Item ID Size Hex Size x1/2 1/4 5
10 SCREWS Indented Hex Washer Head Self Drilling Screws Hex Size Finish /4 Zinc /2 1/4 Zinc /4 1/4 Zinc /4 Zinc /4 1/4 Zinc /2 1/4 Zinc /2 5/16 Climaseal Finish /4 5/16 Climaseal Finish 83226Z 10 3/4 5/16 Zinc /16 Climaseal Finish 83228Z /16 Zinc /4 5/16 Climaseal Finish 83229Z /4 5/16 Zinc /2 5/16 Climaseal Finish 83231Z /2 5/16 Zinc /16 Zinc /4 5/16 Climaseal Finish 83235Z 12 3/4 5/16 Zinc /16 Climaseal Finish 83237Z /16 Zinc /4 5/16 Climaseal Finish 83238Z /4 5/16 Zinc /2 5/16 Climaseal Finish /16 Climaseal Finish /2 5/16 Zinc /4 3/8 Climaseal Finish 83250Z 14 3/4 3/8 Zinc /8 Climaseal Finish 83252Z /8 Zinc /16 Climaseal Finish /4 3/8 Climaseal Finish /2 3/8 Climaseal Finish 83255Z /2 3/8 Zinc /8 Climaseal Finish /2 3/8 Climaseal Finish /8 Climaseal Finish 6
11 Hex Indented Washer Head Self Drilling Screws Self Drilling Point Fine Thread Long Point Hex Size Point Size Finish /4 5/ Climaseal Finish /2 5/16 5 Zinc /16 5 Zinc SCREWS Indented Hex Head with Neoprene Washer Hex Size Finish /4 5/16 Climaseal Finish /16 Zinc /4 5/16 Climaseal Finish /16 Climaseal Finish /4 5/16 Climaseal Finish /2 5/16 Climaseal Finish /16 Climaseal Finish /2 5/16 Zinc /4 3/8 Climaseal Finish /8 3/8 Climaseal Finish /8 Climaseal Finish /4 3/8 Climaseal Finish /2 3/8 Climaseal Finish /8 Climaseal Finish Bonded Neoprene Washer Galvanized Item ID Screw Size Outside Diameter #8 - #10 1/ #12 - #14 5/ /16 3/ /8 3/4 7
12 SCREWS Phillips Oval Head Black With Free Spinning Washer / / Phillips Oval Head Zinc Self Drilling Screws Phillips Modified Truss Black / / /4 Square Drive Pan Head /4 Phillips Pan Head Zinc / / / / / / / / /4 Phillips Modified Truss Head Zinc 83176SQ 8 3/ SQ SQ 8 1-1/4 Liner Screws Zinc Yellow Plated Head Style /4 Phillips Wafer Phillips Wafer /4 Phillips Wafer Wall Liner Zinc Head Style Phillips Wafer Torx Wafer /4 Torx Wafer /2 Torx Wafer Phillips Flat Head Wing Tek Screw Zinc / / / / / /
13 Phillips Flat Head Deck Wood Screw Construction Screws Hex Head Slotted Tapmark Screw SCREWS Mechanically Galvanized / / / Phillips Bugle Head Drywall Screw / Phillips Coarse Drywall Screw 5/16 Hex Head, for use in Concrete 3/16 Tapmarks take 5/32 Carbide Tipped Masonry Drill Bit 1/4 Tapmarks take 3/16 Carbide Tipped Masonry Drill Bit /16 1-1/ /16 1-3/ /16 2-1/ /4 1-1/ /4 1-3/ /4 2-1/ /4 2-3/ /4 3-1/4 Phillips Flat Head Tapmark / / / / / /16 1-1/ /16 1-3/ /16 2-1/ /4 1-1/ /4 1-3/ /4 2-1/4 Torx Head Multi-Purpose Screw Self-Tapping and Countersunk Head W-Cut Thread Design, Zip-Tip Climatex Plated For use in: wood, particle board, cement fiberboard, plastic, sheet metal, etc / /
14 SCREWS Hex Washer Head Hex Size /4 1/ /2 1/ /4 1/ / /8 1/ /2 1/ /4 1/ / /8 5/ /2 5/ /4 5/ / /2 5/ /4 5/ / /4-20 1/2 3/ /4-20 5/8 3/ /4-20 3/4 3/ / / / /4 3/ /16 1/2 1/ /16 3/4 1/ /16 1 1/ /16 1-1/4 1/ /8-16 3/4 9/ / / / /4 9/ / /2 9/16 Type F Thread Cutting Screws Phillips Flat Head /4-20 3/4 Phillips Pan Head / / / / /2 Slotted Pan Head / / / / / / / /4-20 3/ / Torx Drive Flat Head Black Phosphate Torx Size / T / /4 T / /2 T / T / /4 T / /2 T / T / /2 T / T / /2 T / T / T / /4 T / T / /2 T / T-40 Torx Drive Pan Head Zinc Plated Torx Size / T / /2 T / T / T / /4 T / T / /2 T-40 10
15 Slotted Round Head / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Plated Machine Screws / / / / / / / / / / / / / / / / / /4-20 3/ /4-20 1/ /4-20 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / SCREWS 11
16 SCREWS Slotted Round Head / /8-16 1/ /8-16 3/ / / / / / / / / / / / / / / / / / / Slotted Pan Head / / / / / / / / / / / / / / / / / / / / / / / /16 Plated Machine Screws / / / / / /4-20 3/ /4-20 1/ /4-20 3/ / / /4 Phillips Pan Head / / / / / / / / / / / / / / / / / / / / / / / / /4 12
17 Phillips Pan Head / / / / / / /4-20 3/ /4-20 1/ /4-20 3/ / / / / / / / / / / / / / / / / /2 Plated Machine Screws Slotted Truss Head / / / / /4-20 1/ /4-20 5/ /4-20 3/ / / / / /8-16 3/ / Phillips Truss Head SCREWS Hex Head / / / / / / / / / / / / / / /4-20 1/ /4-20 3/ / Black Oxide /
18 SCREWS Slotted Flat Head / / / / / / / / / / / / / / / / / / / / / / / / /4-20 1/ /4-20 3/ / / / / / / / / / / / / / / / / / / / / / Plated Machine Screws / / / / /8-16 1/ /8-16 3/ / / / / / / / / / / / / / / / / / / / / / / / /4 Phillips Flat Head / / / / / / / / / / / / / / /4-20 3/ / / / / /2 14
19 Phillips Oval Head Plated Machine Screws / /4-20 3/ / SCREWS / / / / / / / / / / / / / / / / / /4-20 1/ /4-20 3/ / / / / /2 Slotted Oval Head / / / / / / /2 Type S Plated Thumb Screw / / / / / / /4-20 1/ / / / / / / / / /2 Type P Plated Thumb Screw / / /4-20 1/ /4-20 3/ / / / / / / / / /
20 SCREWS Grade 5 Flat Washers Washers and Nuts SAE/UNF Zinc Plated Steel Item ID Bolt Size Outside Approx Pcs Per Inside Diameter Thickness Diameter Pound #2 7/32 3/32.036/ #4 5/16 1/8.036/ #6 3/8 5/32.036/ #8 7/16 3/16.036/ #10 1/2 7/32.036/ #12 9/16 1/4.051/ /4 5/8 9/32.051/ K Lock Nuts Machine Nuts Item ID Bolt Diameter / / / / / /8-24 Item ID Bolt Size /
21 Hex Head Zinc Plated Lag Screw SCREWS Lag Shields SCREWS / /4 1-1/ / /4 2-1/ / /4 3-1/ / /4 4-1/ / /16 1-1/ / /16 1-1/ / /16 2-1/ / /16 3-1/ / /16 4-1/ / / /8 1-1/ / /8 2-1/ / /8 3-1/ / /8 4-1/ / / / / / /2 3-1/ / /2 4-1/ / / / /2 12 Item ID Description / /4-LONG / /16-LONG / /8-LONG /8-LONG / /2-LONG 17
22 SCREWS Phillips Flat Head / / / / / / / / / / / / / / / / / / / Slotted Round Head / / / / / /2 Plated Wood Screws / / / / / Slotted Flat Head / / / / / / / / / / / / / / / / / / /
23 Magnetic Hex Driver Accessories 1/4" Hex Shank Phillips-Slotted Combo Bit SCREWS Item ID Overall Outside Length Diameter Shank Size /8 1/4 1/ /8 5/16 1/ /8 3/8 1/ /16 1/ /16 1/4 1/ /16 5/16 1/ /16 3/8 1/ /16 7/16 1/4 Quick Change Magnetic Bit Holder Easy to Use Push ahead the collar and insert to take out the bit Use with any standard 1/4 drive Industrial grade construction Item ID Outside Diameter Overall Length /16 2-1/8 Magnetic Bit Holder Torx Bits Item ID Overall Length /2 Item ID Point Size Overall Length Shank Size T / T / T / T / T / T / T / T / T / T / T /16 Tamper Proof For 1/4 Hex Insert Bits For Use in Drywall Drivers Item ID Overall Length Hex Size Shank Size /8 1/4 1/4 4-in-1 Screwdriver Item ID Point Size Overall Length Shank Size T10H 1 1/ T15H 1 1/ T20H 1 1/ T25 1 1/4 Spanner Bits Item ID Item ID Point Size Overall Length Shank Size #8 1 1/ #10 1 1/ /4 1-1/2 5/16 19
24 SCREWS Phillips and Slotted Bits Accessories Item ID Point Overall Shank Size Length Size Style Brand P-1 1 1/4 Phillips P-2 1 1/4 Phillips P-3 1 1/4 Phillips #10 1-1/2 1/4 Slotted #10 1 1/4 Slotted P /16 1/4 Phillips P /16 1/4 Phillips P-2 6 1/4 Phillips P-2 6 1/4 Phillips Apex /16 6 1/4 Slotted Square Recess Power Bits Item ID Point Size Overall Length Shank Size /16 1/ /16 1/ /16 1/ /4 Square Drive Screw Bit Item ID Point Size Shank Size #2 1/4 20
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More informationDistribution Centers. Call Pro-Twist at 866-462-7578 GOASKPT
AnItochu Company Distribution Centers Location Telephone Fax E-mail Addresses ALABAMA - Montgomery (800) 488-2281 (800) 447-8195 Montgomery@primesourcebp.com ARIZONA - Phoenix (800) 755-2291 (623) 245-4144
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationVersion. BBI products and services offered exclusively through distribution
2013 Version BBI products and services offered exclusively through distribution Terms and Conditions of Sale GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationAssembly Instructions Model 1544 Heart-Of-The-Kitchen Island
Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island A. These units are Ready-to-Assemble. Catskill uses positive fastening methods such as wood screws and in some places hidden Bastion fasteners.
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More information4 X 1 3/8 X 3/16 CHANNEL 101.6 x 34.9 x 4.8 CHANNEL
4 X 1 3/8 X 3/16 CHANNEL 101.6 x 34.9 x 4.8 CHANNEL ALLOWABLE UNIFORM LOADS (lbs./ft. / N/m.) Laterally Supported A w = 0.680 in. 2 / 438.7mm 2 Wt. = 0.88 lbs./ft. / 1.31kg/m. I = 2.62 in. 4 / 1090526mm.
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationHow To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
More informationCeta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationSAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER MODEL #7200
SAVE THESE INSTRUCTIONS DEALER/INSTALLER: GIVE TO HOMEOWNER MODEL #7200 ROLLGUARD A-FRAME LADDER LADDER MUST BE ATTACHED TO POOL FRAME. DO NOT USE WITH INFLATABLE POOLS ASSEMBLY AND INSTALLATION MANUAL
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationwww.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 16 6 18 Cable Tab 13 15 8 10 2 Cable Tab 1 11 9 17 14 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationVW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS
VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS Tools required: 10mm/13mm socket and 3/8 drive ratchet with extension Torx T20/25/30 screwdrivers or bits Phillips head screwdriver,
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationPOLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS
POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS Polemount Field Fix Support If you have any questions or incur any problems installing or using the new Polemount, please use Miovision s Support System by emailing
More informationPB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
More informationBuild a Trade-Show Booth for Under $200!
Build a Trade-Show Booth for Under $200! This corner booth, with a seven foot front and sweeping 4x8 backdrop, assembles in less than 20 minutes and can be built in one weekend. Materials Tools 4 x8 x3/4
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationEMP Part # Categor Description
EMP Part # Categor y Description Qty Available as of 01/03/13 Cost/C 001014 SHC 1/4-20x1/2 J429 GR 5 Hex Hd Cap Screw Zinc Yellow 3,300 $1.41 001079 SHC 1/4-20x1 1/4 J429 GR 8 Hex Hd Cap Screw Black Oxide
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationPolicy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
More information*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
More informationCeta Form Hex and TORX L Keys A complete range of industrial quality keys
Ceta Form Hex and TORX L Keys A complete range of industrial quality keys We present a complete range of industrial quality L keys from standard hex to TORX allowing virtually any application. All the
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 4 MOUNTING BRACKET KIT 1 2 3 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME PART # 1...2... #10 x
More informationEarthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001
Earthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001 Prepared by: Katie Walch, Science Education Specialist Western UP Center for Science, Math, and Environmental Education
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationHEAVY DUTY STAIR LIFT SYSTEM Installation and Service Manual
HEAVY DUTY STAIR LIFT SYSTEM Installation and Service Manual WARNING! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those installing this product, as well
More informationInstallation guide Nordic mixer taps. Before installing read this guide first
Installation guide Nordic mixer taps Before installing read this guide first Introduction Installation, maintenance and warranty The Nordic Twintaps are our latest innovation for your kitchen a boiling-water
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationDIVISION: 06 00 00 WOOD, PLASTICS AND COMPOSITES SECTION: 06 05 23 WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 ICC ES Report ICC ES (800) 4 6587 (56) 699 054 www.icc es.org 000 Most Widely Accepted and Trusted ESR 0 Reissued 07/06 This report is subject to renewal 07/07. DIVISION: 06 00 00 WOOD, PLASTICS AND
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #03090414-H Hex Head Drivall Screws (246) Product: Item# Description Unit Pack 08050H3 8 x 1/2-in, Hex Head, Drivall, Clear Zinc, Bulk 10,000 12150H3RG 12 x 1-1/2-in, Hex
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationINSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
More informationCanvas Office Landscape Wall Strip Installation and Disassembly for Recycling Instructions
Y Parts Included: Canvas Office Landscape Wall Strip Installation and Disassembly for Recycling Instructions Tools Required: Power Driver Drill Bit (Determined by fastener) Driver Bit (Determined by fastener)
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationAstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech
AstroSystems Digital Setting Circles for Zhumell, GSO, Apertura and Astro-Tech Components 1 Sky Commander Digital Setting Circle Computer 2 Encoders 10,000 step 1 Sky Commander Digital Setting Circle Manual
More informationFASTENERS. Self-Drilling Screws Made In USA. Product Line THE. Selecting the Length of the Drill Point. Product Description
Self-Drilling Screws Made In USA Product Description Self-drilling fasteners eliminate separate drilling and tapping operations for faster, more economical installations. Tanner Bolt & Nut Corp. offers
More informationBSAMG160401 M16 x 40 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160451 M16 x 45 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160501 M16 x 50 GAL 8.8 STRUCTURAL ASS.
B88MZ160501 HEX ISO G8.8 B/N ZNC M16 x 50 25 B88MZ0502 HEX ISO G8.8 B/N ZNC M x 50 25 B88MZ0552 HEX ISO G8.8 B/N ZNC M x 55 25 B88MZ0602 HEX ISO G8.8 B/N ZNC M x 60 25 S88MZ0502 HEX ISO G8.8 SETSCREW ZNC
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More informationType 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 6 13 11 MOUNTING BRACKET KIT Cable Tab 14 12 7 15 9 Cable Tab 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM
More informationStandard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
More informationOur sales are dedicated to large industries ( 80%) and trading ( 20%).
1 Located in the heart of Lorraine, about 1 km from the A31 highway, the company is in the center of Europe. Any french destination can generally be delivered within 24 hours or within 48 hours maximum.
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationREQUEST FOR QUOTE. Material $ Labor/Installation $ tax $ Total $ Material $ Labor/Installation $ tax $ Total $
REQUEST FOR QUOTE Specifications- Knightdale Station Park Naming Rights Exterior Signage General Conditions 1. Delivery of signs to be within 6 weeks of order confirmation. 2. Shop drawings are required
More informationAMF112 Instruction Manual
AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationComplete System Shelter
Complete System Shelter For Weather Console Installations The weather resistant Complete System Shelter (CSS) provides protection from the elements for system components such as the Vantage Pro2 and Vantage
More informationInstallation instruction do88 Intercooler for Volvo S40 / V50 / C30
Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At
More informationCeta Form Bits & Accessories
Ceta Form industrial quality bits program helps workshops, factories, assembly lines and technicians in various trades to increase the efficiency of their businesses thanks to durability of our bits which
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationHollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
More informationRAIN COLLECTOR S HELF MANUAL
RAIN COLLECTOR S HELF MANUAL The Rain Collector Shelf provides a good mounting support for your Rain Collector II. The Rain Collector Shelf is designed to be attached to Davis Sensor Mounting Arm, and
More informationSPARE PARTS LIST AND ASSEMBLING GUIDELINE FOR EM 50 FAN
SPRE PRTS LIST ND SSEMLING GUIDELINE FOR EM 50 FN Munters euroemme S.p.. Strada Piani, I-807 Chiusavecchia (Imperia) - Italy Tel. +39 083 5 Fax +39 083 5333 http://www.munters.com e-mail:info@munterseuroemme.it
More informationTraditional Sonar and DSI Sonar Installation
Traditional Sonar and DSI Sonar Installation This document covers the installation of the transducer and display unit installation, which includes connecting the unit to power and installing the unit on
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationR O A D M A S T E R, I N C.
R O A D M A S T E R, I N C. ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 12 10 3 11 4 5 13 7 8 360-896-0407 fax 360-735-9300 www.roadmasterinc.com ITEM QTY NAME MATERIAL 1... 4...1/2 x 1 1/2
More informationTS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
More informationPulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE
Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has
More informationS C R E W S THE ORIGINAL ROBERTSON L ORIGINAL HVAC FASTENER PROGRAM PROGRAMME HVAC
ROBERTSON S C R E W S SCRULOX THE ORIGINAL ROBERTSON L ORIGINAL HVAC FASTENER PROGRAM PROGRAMME HVAC FASTENING SYSTEM SYSTÈME DE PRISE The Original Robertson Fastening System / Système de Prise Insist
More informationFixtures - Parts - Accessories to shampoo bowls
Page 1??? - For what brand of bowl do you need parts??? Find out by looking on the bottom of the bowl, between the front and strainer, where molded in the bottom is the brand and model number. For example,
More informationAMF112 (6904-002010 <00>) 13mm (1/2 in.)
AMF112 () Concrete Wood 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe,
More informationThe Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
More informationInstallation Manual. Toilet Partitions, Dressing Compartments & Shower Stalls
Installation Manual Toilet Partitions, Dressing Compartments & Shower Stalls Metpar Corp 95 State Street, Westbury, New York, USA, 11590 Tel: 516-333-2600 Fax: 516-333-2618 Internet: http://www.metpar.com
More informationInstallation Instructions
Installation Instructions One-Piece Deep Wall Sleeve For Use with Packaged Terminal Units Please read these instructions completely before attempting installation. NOTE: Ensure that the unit is only installed
More informationCRASH RAIL INSTALLATION HEIGHT
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationPRS X-axis E-chain installation: For tools with a 12 Z-Axis
PRS X-axis Energy Chain (Echain) Installation Page -1- PRS X-axis E-chain installation: For tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144.
More informationCP2 Buried Cable Pedestal Initial & Rehab Installation Instructions
Printing 3 March 2008 CP2 Buried Cable Pedestal Initial & Rehab Installation Instructions This instruction is intended for CP2 cable pedestal installations and replacements. The following tools will be
More informationUNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
More informationAmerican National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
More informationINSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
More informationhttp://mbworld.org/forums/c32-amg-c55-amg-w203/449471-famous-ac-clicking-noiseac-footwell-damper-linkage-replacement-diy-details-steps.
Air Conditioner / HVAC W203 Stepper Motor Repair PART 2 OF 3 forums/c-class-w203/177068-noisy-air-conditioner-stepper-motorreplacement-clicking-hissing.html forums/c32-amg-c55-amg-w203/449471-famous-ac-clicking-noiseac-footwell-damper-linkage-replacement-diy-details-steps.html
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationAcero Inoxidable 304 Perno Cabeza Hexagonal Rosca Entera Stainless Steel 304 Hex Cap Screw Full Thread
Perno Cabeza Hexagonal Rosca Entera Hex Cap Screw Full Thread Dimensiones: ANSI B 18.2.1 Rosca: UNC ANSI B 1.1 y BSW BS 84 Dimensions: ANSI B 18.2.1 Thread: UNC ANSI B 1.1 and BSW BS 84 Prices in US$ -
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More information